-- Machine generated MIB file, do not edit!
--
-- MIB file for CDA5010, type code 0B.86, software label 170
-- Generated on Tuesday, 09-Aug-16 14:53:27 UTC
-- CVS $Id: CDA5010_0b86_sw170.mib,v 1.10 2016/08/09 14:53:29 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

CDA5010-0b86-sw170-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

cda5010-0b86-sw170 MODULE-IDENTITY
    LAST-UPDATED "201608091453Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for CDA5010, type code 0B.86, software label 170"
    REVISION "201608091453Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 2950170 }

cda5010-0b86 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type CDA5010"
    ::= { products 2950 }

sw170 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 170"
    ::= { cda5010-0b86 170 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeInputStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        n525(1),
        n625(2)
    }

TypeSDIFormat ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        n143MBit(1),
        n177MBit(2),
        n270MBit(3),
        n360MBit(4)
    }

TypeOut1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        rgb(0),
        yuv(1)
    }

TypeOut2 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n3CVBS(0),
        sVideoCVBS(1)
    }

TypeStandardSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        followLastInput(0),
        n625(1),
        n525(2)
    }

TypeTestPattern ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        colorbar(1)
    }

TypeAutoTestPattern ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        black(1),
        colorbar(2)
    }

TypeYLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        smpte(0),
        betacam(1)
    }

TypeUVLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n700mV(0),
        n1000mV(1),
        n648mV(2),
        n700mVX(3),
        n1000mVX(4)
    }

TypeLimiter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        disable(0),
        n15IRE(1),
        n60IRE(2),
        n110IRE(3)
    }

TypeYUVLevelAdjust ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        fixed(0),
        adjust(1)
    }

TypeLuminanceFilter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lowPass(0),
        notchFilter(1),
        lowPassX(2),
        notchFilterX(3),
        extendedMode(4),
        cif(5)
    }

TypeChrominanceFilter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n065MHzLP(0),
        n100MHzLP(1),
        n130MHzLP(2),
        n200MHzLP(3),
        n300MHzLP(4),
        cif(5),
        qcif(6)
    }

TypeBlankVBI ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        transparent(0),
        blank(1)
    }

TypeChromCtl ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeActiveLineDuration ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        cCIR601(0),
        iTUB470(1)
    }

TypeLumaDelay ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0Ns(0),
        n74Ns(1),
        n148Ns(2),
        n222Ns(3)
    }

TypeChromaDelay ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0Ns(0),
        n148Ns(1),
        n296Ns(2)
    }

TypeEventSDIInputNoInputSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventSDIInputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: SDI Input No Input (input signal can not be detected)"
    ::= { paramEntry 14 }

event525videoinput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 525 video input"
    ::= { paramEntry 15 }

inputStandard OBJECT-TYPE
    SYNTAX TypeInputStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input standard"
    ::= { paramEntry 16 }

sDIFormat OBJECT-TYPE
    SYNTAX TypeSDIFormat
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input format"
    ::= { paramEntry 17 }

out1 OBJECT-TYPE
    SYNTAX TypeOut1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Video output 1 format"
    ::= { paramEntry 18 }

out2 OBJECT-TYPE
    SYNTAX TypeOut2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Video output 2 format"
    ::= { paramEntry 19 }

standardSelect OBJECT-TYPE
    SYNTAX TypeStandardSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Test pattern standard (if no current input standard)"
    ::= { paramEntry 20 }

pedestal OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "add Pedestal (applies to NTSC/525 output format only)"
    ::= { paramEntry 23 }

palM OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "produce output according to PAL M standard (applies to 525 output format only)"
    ::= { paramEntry 24 }

testPattern OBJECT-TYPE
    SYNTAX TypeTestPattern
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Test pattern selection"
    ::= { paramEntry 25 }

autoTestPattern OBJECT-TYPE
    SYNTAX TypeAutoTestPattern
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set output when there is no input signal"
    ::= { paramEntry 26 }

autoTestPatternON OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "enable test pattern when there is no input signal"
    ::= { paramEntry 27 }

yLevel OBJECT-TYPE
    SYNTAX TypeYLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gain Y level"
    ::= { paramEntry 28 }

uVLevel OBJECT-TYPE
    SYNTAX TypeUVLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "UV level"
    ::= { paramEntry 29 }

limiter OBJECT-TYPE
    SYNTAX TypeLimiter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "luminance undershot limiter"
    ::= { paramEntry 30 }

yUVLevelAdjust OBJECT-TYPE
    SYNTAX TypeYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "YUV level adjust"
    ::= { paramEntry 31 }

luminanceLevel OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Luminance (Y) Level"
    ::= { paramEntry 32 }

uLevel OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Chrominance (U) Level"
    ::= { paramEntry 33 }

vLevel OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Chrominance (V) Level"
    ::= { paramEntry 34 }

blackLevelAdjust OBJECT-TYPE
    SYNTAX TypeYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "black level adjust"
    ::= { paramEntry 35 }

blackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Black Level"
    ::= { paramEntry 36 }

sharpnessAdjust OBJECT-TYPE
    SYNTAX TypeYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "sharpness adjust (Note: setting this to ADJUST will set LuminanceFilter to Extended"
    ::= { paramEntry 37 }

sharpness OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "sharpness"
    ::= { paramEntry 38 }

hueAdjust OBJECT-TYPE
    SYNTAX TypeYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "hue adjust"
    ::= { paramEntry 39 }

hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "hue"
    ::= { paramEntry 40 }

luminanceFilter OBJECT-TYPE
    SYNTAX TypeLuminanceFilter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "luminance filter (Note: setting this to anything but Extended will disable SharpnessAdjust)"
    ::= { paramEntry 41 }

chrominanceFilter OBJECT-TYPE
    SYNTAX TypeChrominanceFilter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "chrominance filter"
    ::= { paramEntry 42 }

blankVBI OBJECT-TYPE
    SYNTAX TypeBlankVBI
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "blank VBI (Vertical Blanking Interval)"
    ::= { paramEntry 43 }

chromCtl OBJECT-TYPE
    SYNTAX TypeChromCtl
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "disable chroma in output"
    ::= { paramEntry 44 }

burstCtrl OBJECT-TYPE
    SYNTAX TypeChromCtl
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "disable burst in output"
    ::= { paramEntry 45 }

activeLineDuration OBJECT-TYPE
    SYNTAX TypeActiveLineDuration
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "active line duration"
    ::= { paramEntry 46 }

lumaDelay OBJECT-TYPE
    SYNTAX TypeLumaDelay
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "luma delay in [ns]"
    ::= { paramEntry 47 }

chromaDelay OBJECT-TYPE
    SYNTAX TypeChromaDelay
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "chroma delay in [ns]"
    ::= { paramEntry 48 }

doubleBuf OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "double buffering on/off"
    ::= { paramEntry 49 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 50 }

eventSDIInputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInputNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input No Input (input signal can not be detected)"
    ::= { paramEntry 51 }

event525videoinputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInputNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 525 video input"
    ::= { paramEntry 52 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 53 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of CDA5010 parameters"
    ::= { sw170 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of CDA5010 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventSDIInputNoInput OnOffValue,
    event525videoinput OnOffValue,
    inputStandard TypeInputStandard,
    sDIFormat TypeSDIFormat,
    out1 TypeOut1,
    out2 TypeOut2,
    standardSelect TypeStandardSelect,
    pedestal OnOffValue,
    palM OnOffValue,
    testPattern TypeTestPattern,
    autoTestPattern TypeAutoTestPattern,
    autoTestPatternON OnOffValue,
    yLevel TypeYLevel,
    uVLevel TypeUVLevel,
    limiter TypeLimiter,
    yUVLevelAdjust TypeYUVLevelAdjust,
    luminanceLevel FixedPointValue2,
    uLevel FixedPointValue2,
    vLevel FixedPointValue2,
    blackLevelAdjust TypeYUVLevelAdjust,
    blackLevel FixedPointValue1,
    sharpnessAdjust TypeYUVLevelAdjust,
    sharpness Integer32,
    hueAdjust TypeYUVLevelAdjust,
    hue FixedPointValue1,
    luminanceFilter TypeLuminanceFilter,
    chrominanceFilter TypeChrominanceFilter,
    blankVBI TypeBlankVBI,
    chromCtl TypeChromCtl,
    burstCtrl TypeChromCtl,
    activeLineDuration TypeActiveLineDuration,
    lumaDelay TypeLumaDelay,
    chromaDelay TypeChromaDelay,
    doubleBuf OnOffValue,
    boardID Integer32,
    eventSDIInputNoInputSNMP TypeEventSDIInputNoInputSNMP,
    event525videoinputSNMP TypeEventSDIInputNoInputSNMP,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of CDA5010"
    ::= { sw170 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventSDIInputNoInput,
        event525videoinput,
        inputStandard,
        sDIFormat,
        out1,
        out2,
        standardSelect,
        pedestal,
        palM,
        testPattern,
        autoTestPattern,
        autoTestPatternON,
        yLevel,
        uVLevel,
        limiter,
        yUVLevelAdjust,
        luminanceLevel,
        uLevel,
        vLevel,
        blackLevelAdjust,
        blackLevel,
        sharpnessAdjust,
        sharpness,
        hueAdjust,
        hue,
        luminanceFilter,
        chrominanceFilter,
        blankVBI,
        chromCtl,
        burstCtrl,
        activeLineDuration,
        lumaDelay,
        chromaDelay,
        doubleBuf,
        boardID,
        eventSDIInputNoInputSNMP,
        event525videoinputSNMP,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END