-- Machine generated MIB file, do not edit! -- -- MIB file for CDA5011, type code 0B.85, software label 117 -- Generated on Tuesday, 09-Aug-16 14:51:33 UTC -- CVS $Id: CDA5011_0b85_sw117.mib,v 1.12 2016/08/09 14:51:35 jvo Exp $ -- -- Copyright 2003-2016 by LYNX Technik AG -- -- These coded instructions, statements, and computer programs contain -- unpublished proprietary information written by LYNX Technik AG and -- are protected by Federal copyright law. They may not be disclosed -- to third parties or copied or duplicated in any form, in whole or -- in part, without the prior written consent of LYNX Technik AG. -- CDA5011-0b85-sw117-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578 TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579 MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580 mib-modules, products, FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI; cda5011-0b85-sw117 MODULE-IDENTITY LAST-UPDATED "201608091451Z" ORGANIZATION "LYNX Technik AG" CONTACT-INFO "LYNX Technik AG Brunnenweg 3 64331 Weiterstadt http://www.lynx-technik.com mailto:support@lynx-technik.com" DESCRIPTION "MIB module definition for CDA5011, type code 0B.85, software label 117" REVISION "201608091451Z" DESCRIPTION "Generated by LYNX Asset Database" ::= { mib-modules 2949117 } cda5011-0b85 OBJECT-IDENTITY STATUS current DESCRIPTION "LYNX device type CDA5011" ::= { products 2949 } sw117 OBJECT-IDENTITY STATUS current DESCRIPTION "Software label 117" ::= { cda5011-0b85 117 } -- Type definitions TypeStatusColor ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { unknown(0), black(1), green(2), yellow(3), red(4) } TypeFactoryReset ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { press(0) } TypeInputStandard ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { missing(0), n525(1), n625(2) } TypeOut1 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { rgb(0), yuv(1), n3CVBS(2) } TypeOut2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n3CVBS(0), sVideoCVBS(1) } TypeStandardSelect ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { followLastInput(0), n625(1), n525(2) } TypeTestPattern ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { off(0), colorbar(1), colorbarsOverRed(2), blue(3), black(4) } TypeTestPatternSelect ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { colorbar(0), colorbarOverRed(1), blue(2), black(3) } TypeAutoTestPattern ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { off(0), black(1), colorbar(2), colorbarsOverRed(3), blue(4) } TypeYLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { smpte(0), betacam(1) } TypeUVLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n700mV(0), n1000mV(1), n648mV(2), n700mVX(3), n1000mVX(4) } TypeLimiter ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { disable(0), n15IRE(1), n60IRE(2), n110IRE(3) } TypeYUVLevelAdjust ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { fixed(0), adjust(1) } TypeLuminanceFilter ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { lowPass(0), notchFilter(1), lowPassX(2), notchFilterX(3), extendedMode(4), cif(5) } TypeChrominanceFilter ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n065MHzLP(0), n100MHzLP(1), n130MHzLP(2), n200MHzLP(3), n300MHzLP(4), cif(5), qcif(6) } TypeBlankVBI ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { transparent(0), blank(1) } TypeChromCtl ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { on(0), off(1) } TypeActiveLineDuration ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { cCIR601(0), iTUB470(1) } TypeLumaDelay ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n0Ns(0), n74Ns(1), n148Ns(2), n222Ns(3) } TypeChromaDelay ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n0Ns(0), n148Ns(1), n296Ns(2) } TypeReferenceSource ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { internRack(0), externBoard(1), off(2) } TypeSyncMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { vSync(0), hSync(1) } TypeEventSDIInputNoInputSNMP ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), onOnly(1), offOnly(2), onOff(3) } -- Parameter definitions typeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "LYNX product type name" ::= { paramEntry 1 } displayName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller" ::= { paramEntry 2 } position OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)" ::= { paramEntry 3 } uptime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Connection time of the device to this UI (in seconds)" ::= { paramEntry 4 } type OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device type code" ::= { paramEntry 5 } version OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device version information" ::= { paramEntry 6 } statusColor OBJECT-TYPE SYNTAX TypeStatusColor MAX-ACCESS read-only STATUS current DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)" ::= { paramEntry 7 } statusColorRGB OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current color of the Devices Master LED as #RRGGBB" ::= { paramEntry 8 } statusText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current status text (OK or error-details)" ::= { paramEntry 9 } factoryReset OBJECT-TYPE SYNTAX TypeFactoryReset MAX-ACCESS read-write STATUS current DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)" ::= { paramEntry 10 } lock OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Lock Device" ::= { paramEntry 11 } locate OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF" ::= { paramEntry 12 } eventSDIInputNoInput OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: SDI Input No Input (input signal can not be detected)" ::= { paramEntry 14 } eventstandardmismatch OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: standard mismatch ((in linesync mode): reference and SDI standards dont match)" ::= { paramEntry 15 } eventReferenceNoInput OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: Reference No Input (reference input signal can not be detected)" ::= { paramEntry 16 } event525videoreference OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Debug Event: 525 video reference" ::= { paramEntry 17 } event525videoinput OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Debug Event: 525 video input" ::= { paramEntry 18 } inputStandard OBJECT-TYPE SYNTAX TypeInputStandard MAX-ACCESS read-only STATUS current DESCRIPTION "SDI input standard" ::= { paramEntry 19 } out1 OBJECT-TYPE SYNTAX TypeOut1 MAX-ACCESS read-write STATUS current DESCRIPTION "Video output 1 format" ::= { paramEntry 20 } out2 OBJECT-TYPE SYNTAX TypeOut2 MAX-ACCESS read-write STATUS current DESCRIPTION "Video output 2 format" ::= { paramEntry 21 } standardSelect OBJECT-TYPE SYNTAX TypeStandardSelect MAX-ACCESS read-write STATUS current DESCRIPTION "Test pattern standard (if no current input standard)" ::= { paramEntry 22 } pedestal OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "add Pedestal (applies to NTSC/525 output format only)" ::= { paramEntry 23 } testPattern OBJECT-TYPE SYNTAX TypeTestPattern MAX-ACCESS read-write STATUS current DESCRIPTION "Test pattern selection" ::= { paramEntry 24 } testPatternSelect OBJECT-TYPE SYNTAX TypeTestPatternSelect MAX-ACCESS read-write STATUS current DESCRIPTION "Test pattern selection" ::= { paramEntry 25 } testPatternON OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Test pattern selection" ::= { paramEntry 26 } autoTestPattern OBJECT-TYPE SYNTAX TypeAutoTestPattern MAX-ACCESS read-write STATUS current DESCRIPTION "set output when there is no input signal" ::= { paramEntry 27 } autoTestPatternON OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "enable test pattern when there is no input signal" ::= { paramEntry 28 } yLevel OBJECT-TYPE SYNTAX TypeYLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Gain Y level" ::= { paramEntry 29 } uVLevel OBJECT-TYPE SYNTAX TypeUVLevel MAX-ACCESS read-write STATUS current DESCRIPTION "UV level" ::= { paramEntry 30 } limiter OBJECT-TYPE SYNTAX TypeLimiter MAX-ACCESS read-write STATUS current DESCRIPTION "luminance undershot limiter" ::= { paramEntry 31 } yUVLevelAdjust OBJECT-TYPE SYNTAX TypeYUVLevelAdjust MAX-ACCESS read-write STATUS current DESCRIPTION "YUV level adjust" ::= { paramEntry 33 } luminanceLevel OBJECT-TYPE SYNTAX FixedPointValue2 MAX-ACCESS read-write STATUS current DESCRIPTION "Luminance (Y) Level" ::= { paramEntry 34 } uLevel OBJECT-TYPE SYNTAX FixedPointValue2 MAX-ACCESS read-write STATUS current DESCRIPTION "Chrominance (U) Level" ::= { paramEntry 35 } vLevel OBJECT-TYPE SYNTAX FixedPointValue2 MAX-ACCESS read-write STATUS current DESCRIPTION "Chrominance (V) Level" ::= { paramEntry 36 } blackLevelAdjust OBJECT-TYPE SYNTAX TypeYUVLevelAdjust MAX-ACCESS read-write STATUS current DESCRIPTION "black level adjust" ::= { paramEntry 37 } blackLevel OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "Black Level" ::= { paramEntry 38 } sharpnessAdjust OBJECT-TYPE SYNTAX TypeYUVLevelAdjust MAX-ACCESS read-write STATUS current DESCRIPTION "sharpness adjust (Note: setting this to ADJUST will set LuminanceFilter to Extended" ::= { paramEntry 39 } sharpness OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sharpness" ::= { paramEntry 40 } hueAdjust OBJECT-TYPE SYNTAX TypeYUVLevelAdjust MAX-ACCESS read-write STATUS current DESCRIPTION "hue adjust" ::= { paramEntry 41 } hue OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "hue" ::= { paramEntry 42 } luminanceFilter OBJECT-TYPE SYNTAX TypeLuminanceFilter MAX-ACCESS read-write STATUS current DESCRIPTION "luminance filter (Note: setting this to anything but Extended will disable SharpnessAdjust)" ::= { paramEntry 43 } chrominanceFilter OBJECT-TYPE SYNTAX TypeChrominanceFilter MAX-ACCESS read-write STATUS current DESCRIPTION "chrominance filter" ::= { paramEntry 44 } blankVBI OBJECT-TYPE SYNTAX TypeBlankVBI MAX-ACCESS read-write STATUS current DESCRIPTION "blank VBI (Vertical Blanking Interval)" ::= { paramEntry 45 } chromCtl OBJECT-TYPE SYNTAX TypeChromCtl MAX-ACCESS read-write STATUS current DESCRIPTION "disable chroma in output" ::= { paramEntry 46 } burstCtrl OBJECT-TYPE SYNTAX TypeChromCtl MAX-ACCESS read-write STATUS current DESCRIPTION "disable burst in output" ::= { paramEntry 47 } activeLineDuration OBJECT-TYPE SYNTAX TypeActiveLineDuration MAX-ACCESS read-write STATUS current DESCRIPTION "active line duration" ::= { paramEntry 48 } lumaDelay OBJECT-TYPE SYNTAX TypeLumaDelay MAX-ACCESS read-write STATUS current DESCRIPTION "luma delay in [ns]" ::= { paramEntry 49 } chromaDelay OBJECT-TYPE SYNTAX TypeChromaDelay MAX-ACCESS read-write STATUS current DESCRIPTION "chroma delay in [ns]" ::= { paramEntry 50 } doubleBuf OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "double buffering on/off" ::= { paramEntry 51 } referenceStandard OBJECT-TYPE SYNTAX TypeInputStandard MAX-ACCESS read-only STATUS current DESCRIPTION "Reference input standard" ::= { paramEntry 53 } referenceSource OBJECT-TYPE SYNTAX TypeReferenceSource MAX-ACCESS read-write STATUS current DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)" ::= { paramEntry 54 } syncMode OBJECT-TYPE SYNTAX TypeSyncMode MAX-ACCESS read-write STATUS current DESCRIPTION "Line synchronizer mode" ::= { paramEntry 55 } delayLine OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay lines. Combine with DelayPixel and DelayQuarterPixel for total delay" ::= { paramEntry 56 } delayPixel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay pixel. Combined with DelayLine and DelayQuarterPixel for total delay" ::= { paramEntry 57 } delayQuarterPixel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay by quarter pixel. Combined with DelayLine and DelayPixel for total delay" ::= { paramEntry 58 } delayUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "total delay in us" ::= { paramEntry 59 } phase OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Phase adjust" ::= { paramEntry 60 } colorBurstPhase OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Color burst phase adjust" ::= { paramEntry 61 } palM OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "produce output according to PAL M standard (applies to 525 output format only)" ::= { paramEntry 64 } boardID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "BoardID" ::= { paramEntry 65 } eventSDIInputNoInputSNMP OBJECT-TYPE SYNTAX TypeEventSDIInputNoInputSNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: SDI Input No Input (input signal can not be detected)" ::= { paramEntry 66 } eventstandardmismatchSNMP OBJECT-TYPE SYNTAX TypeEventSDIInputNoInputSNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: standard mismatch ((in linesync mode): reference and SDI standards dont match)" ::= { paramEntry 67 } eventReferenceNoInputSNMP OBJECT-TYPE SYNTAX TypeEventSDIInputNoInputSNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: Reference No Input (reference input signal can not be detected)" ::= { paramEntry 68 } event525videoreferenceSNMP OBJECT-TYPE SYNTAX TypeEventSDIInputNoInputSNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: 525 video reference" ::= { paramEntry 69 } event525videoinputSNMP OBJECT-TYPE SYNTAX TypeEventSDIInputNoInputSNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: 525 video input" ::= { paramEntry 70 } sNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Number" ::= { paramEntry 71 } -- Parameter table paramTable OBJECT-TYPE SYNTAX SEQUENCE OF ParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of CDA5011 parameters" ::= { sw117 1 } paramEntry OBJECT-TYPE SYNTAX ParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the table of CDA5011 parameters" INDEX { IMPLIED position } ::= { paramTable 1 } ParamEntry ::= SEQUENCE { typeName DisplayString, displayName DisplayString, position OCTET STRING, uptime TimeTicks, type DisplayString, version DisplayString, statusColor TypeStatusColor, statusColorRGB DisplayString, statusText DisplayString, factoryReset TypeFactoryReset, lock OnOffValue, locate OnOffValue, eventSDIInputNoInput OnOffValue, eventstandardmismatch OnOffValue, eventReferenceNoInput OnOffValue, event525videoreference OnOffValue, event525videoinput OnOffValue, inputStandard TypeInputStandard, out1 TypeOut1, out2 TypeOut2, standardSelect TypeStandardSelect, pedestal OnOffValue, testPattern TypeTestPattern, testPatternSelect TypeTestPatternSelect, testPatternON OnOffValue, autoTestPattern TypeAutoTestPattern, autoTestPatternON OnOffValue, yLevel TypeYLevel, uVLevel TypeUVLevel, limiter TypeLimiter, yUVLevelAdjust TypeYUVLevelAdjust, luminanceLevel FixedPointValue2, uLevel FixedPointValue2, vLevel FixedPointValue2, blackLevelAdjust TypeYUVLevelAdjust, blackLevel FixedPointValue1, sharpnessAdjust TypeYUVLevelAdjust, sharpness Integer32, hueAdjust TypeYUVLevelAdjust, hue FixedPointValue1, luminanceFilter TypeLuminanceFilter, chrominanceFilter TypeChrominanceFilter, blankVBI TypeBlankVBI, chromCtl TypeChromCtl, burstCtrl TypeChromCtl, activeLineDuration TypeActiveLineDuration, lumaDelay TypeLumaDelay, chromaDelay TypeChromaDelay, doubleBuf OnOffValue, referenceStandard TypeInputStandard, referenceSource TypeReferenceSource, syncMode TypeSyncMode, delayLine Integer32, delayPixel Integer32, delayQuarterPixel Integer32, delayUs Integer32, phase Integer32, colorBurstPhase Integer32, palM OnOffValue, boardID Integer32, eventSDIInputNoInputSNMP TypeEventSDIInputNoInputSNMP, eventstandardmismatchSNMP TypeEventSDIInputNoInputSNMP, eventReferenceNoInputSNMP TypeEventSDIInputNoInputSNMP, event525videoreferenceSNMP TypeEventSDIInputNoInputSNMP, event525videoinputSNMP TypeEventSDIInputNoInputSNMP, sNumber DisplayString } -- Conformance statements conformance OBJECT-IDENTITY STATUS current DESCRIPTION "Conformance declaration of CDA5011" ::= { sw117 2 } paramGroup OBJECT-GROUP OBJECTS { typeName, displayName, position, uptime, type, version, statusColor, statusColorRGB, statusText, factoryReset, lock, locate, eventSDIInputNoInput, eventstandardmismatch, eventReferenceNoInput, event525videoreference, event525videoinput, inputStandard, out1, out2, standardSelect, pedestal, testPattern, testPatternSelect, testPatternON, autoTestPattern, autoTestPatternON, yLevel, uVLevel, limiter, yUVLevelAdjust, luminanceLevel, uLevel, vLevel, blackLevelAdjust, blackLevel, sharpnessAdjust, sharpness, hueAdjust, hue, luminanceFilter, chrominanceFilter, blankVBI, chromCtl, burstCtrl, activeLineDuration, lumaDelay, chromaDelay, doubleBuf, referenceStandard, referenceSource, syncMode, delayLine, delayPixel, delayQuarterPixel, delayUs, phase, colorBurstPhase, palM, boardID, eventSDIInputNoInputSNMP, eventstandardmismatchSNMP, eventReferenceNoInputSNMP, event525videoreferenceSNMP, event525videoinputSNMP, sNumber } STATUS current DESCRIPTION "Conformance group containing all device parameters" ::= { conformance 1 } paramCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance specification" MODULE -- This module MANDATORY-GROUPS { paramGroup } ::= { conformance 2 } END