-- Machine generated MIB file, do not edit!
--
-- MIB file for CDA5011, type code 0B.85, software label 127
-- Generated on Tuesday, 09-Aug-16 14:50:23 UTC
-- CVS $Id: CDA5011_0b85_sw127.mib,v 1.11 2016/08/09 14:50:25 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

CDA5011-0b85-sw127-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

cda5011-0b85-sw127 MODULE-IDENTITY
    LAST-UPDATED "201608091450Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for CDA5011, type code 0B.85, software label 127"
    REVISION "201608091450Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 2949127 }

cda5011-0b85 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type CDA5011"
    ::= { products 2949 }

sw127 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 127"
    ::= { cda5011-0b85 127 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeInputStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        n525(1),
        n625(2)
    }

TypeOut1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        rgb(0),
        yuv(1),
        n3CVBS(2)
    }

TypeOut2 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n3CVBS(0),
        sVideoCVBS(1)
    }

TypeStandardSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        followLastInput(0),
        n625(1),
        n525(2)
    }

TypeTestPattern ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        colorbar(1),
        colorbarsOverRed(2),
        blue(3),
        black(4)
    }

TypeTestPatternSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        colorbar(0),
        colorbarOverRed(1),
        blue(2),
        black(3)
    }

TypeAutoTestPattern ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        black(1),
        colorbar(2),
        colorbarsOverRed(3),
        blue(4)
    }

TypeYLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        smpte(0),
        betacam(1)
    }

TypeUVLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n700mV(0),
        n1000mV(1),
        n648mV(2),
        n700mVX(3),
        n1000mVX(4)
    }

TypeLimiter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        disable(0),
        n15IRE(1),
        n60IRE(2),
        n110IRE(3)
    }

TypeYUVLevelAdjust ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        fixed(0),
        adjust(1)
    }

TypeLuminanceFilter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lowPass(0),
        notchFilter(1),
        lowPassX(2),
        notchFilterX(3),
        extendedMode(4),
        cif(5)
    }

TypeChrominanceFilter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n065MHzLP(0),
        n100MHzLP(1),
        n130MHzLP(2),
        n200MHzLP(3),
        n300MHzLP(4),
        cif(5),
        qcif(6)
    }

TypeBlankVBI ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        transparent(0),
        blank(1)
    }

TypeChromCtl ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeActiveLineDuration ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        cCIR601(0),
        iTUB470(1)
    }

TypeLumaDelay ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0Ns(0),
        n74Ns(1),
        n148Ns(2),
        n222Ns(3)
    }

TypeChromaDelay ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0Ns(0),
        n148Ns(1),
        n296Ns(2)
    }

TypeReferenceSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        internRack(0),
        externBoard(1),
        off(2)
    }

TypeSyncMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        vSync(0),
        hSync(1)
    }

TypeEventSDIInputNoInputSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventSDIInputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: SDI Input No Input (input signal can not be detected)"
    ::= { paramEntry 14 }

eventstandardmismatch OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: standard mismatch ((in linesync mode): reference and SDI standards dont match)"
    ::= { paramEntry 15 }

eventReferenceNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Reference No Input (reference input signal can not be detected)"
    ::= { paramEntry 16 }

event525videoreference OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 525 video reference"
    ::= { paramEntry 17 }

event525videoinput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 525 video input"
    ::= { paramEntry 18 }

inputStandard OBJECT-TYPE
    SYNTAX TypeInputStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input standard"
    ::= { paramEntry 19 }

out1 OBJECT-TYPE
    SYNTAX TypeOut1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Video output 1 format"
    ::= { paramEntry 20 }

out2 OBJECT-TYPE
    SYNTAX TypeOut2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Video output 2 format"
    ::= { paramEntry 21 }

standardSelect OBJECT-TYPE
    SYNTAX TypeStandardSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Test pattern standard (if no current input standard)"
    ::= { paramEntry 22 }

pedestal OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "add Pedestal (applies to NTSC/525 output format only)"
    ::= { paramEntry 23 }

testPattern OBJECT-TYPE
    SYNTAX TypeTestPattern
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Test pattern selection"
    ::= { paramEntry 24 }

testPatternSelect OBJECT-TYPE
    SYNTAX TypeTestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Test pattern selection"
    ::= { paramEntry 25 }

testPatternON OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Test pattern selection"
    ::= { paramEntry 26 }

autoTestPattern OBJECT-TYPE
    SYNTAX TypeAutoTestPattern
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set output when there is no input signal"
    ::= { paramEntry 27 }

autoTestPatternON OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "enable test pattern when there is no input signal"
    ::= { paramEntry 28 }

yLevel OBJECT-TYPE
    SYNTAX TypeYLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gain Y level"
    ::= { paramEntry 29 }

uVLevel OBJECT-TYPE
    SYNTAX TypeUVLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "UV level"
    ::= { paramEntry 30 }

limiter OBJECT-TYPE
    SYNTAX TypeLimiter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "luminance undershot limiter"
    ::= { paramEntry 31 }

yUVLevelAdjust OBJECT-TYPE
    SYNTAX TypeYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "YUV level adjust"
    ::= { paramEntry 33 }

luminanceLevel OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Luminance (Y) Level"
    ::= { paramEntry 34 }

uLevel OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Chrominance (U) Level"
    ::= { paramEntry 35 }

vLevel OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Chrominance (V) Level"
    ::= { paramEntry 36 }

blackLevelAdjust OBJECT-TYPE
    SYNTAX TypeYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "black level adjust"
    ::= { paramEntry 37 }

blackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Black Level"
    ::= { paramEntry 38 }

sharpnessAdjust OBJECT-TYPE
    SYNTAX TypeYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "sharpness adjust (Note: setting this to ADJUST will set LuminanceFilter to Extended"
    ::= { paramEntry 39 }

sharpness OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "sharpness"
    ::= { paramEntry 40 }

hueAdjust OBJECT-TYPE
    SYNTAX TypeYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "hue adjust"
    ::= { paramEntry 41 }

hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "hue"
    ::= { paramEntry 42 }

luminanceFilter OBJECT-TYPE
    SYNTAX TypeLuminanceFilter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "luminance filter (Note: setting this to anything but Extended will disable SharpnessAdjust)"
    ::= { paramEntry 43 }

chrominanceFilter OBJECT-TYPE
    SYNTAX TypeChrominanceFilter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "chrominance filter"
    ::= { paramEntry 44 }

blankVBI OBJECT-TYPE
    SYNTAX TypeBlankVBI
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "blank VBI (Vertical Blanking Interval)"
    ::= { paramEntry 45 }

chromCtl OBJECT-TYPE
    SYNTAX TypeChromCtl
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "disable chroma in output"
    ::= { paramEntry 46 }

burstCtrl OBJECT-TYPE
    SYNTAX TypeChromCtl
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "disable burst in output"
    ::= { paramEntry 47 }

activeLineDuration OBJECT-TYPE
    SYNTAX TypeActiveLineDuration
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "active line duration"
    ::= { paramEntry 48 }

lumaDelay OBJECT-TYPE
    SYNTAX TypeLumaDelay
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "luma delay in [ns]"
    ::= { paramEntry 49 }

chromaDelay OBJECT-TYPE
    SYNTAX TypeChromaDelay
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "chroma delay in [ns]"
    ::= { paramEntry 50 }

doubleBuf OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "double buffering on/off"
    ::= { paramEntry 51 }

referenceStandard OBJECT-TYPE
    SYNTAX TypeInputStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Reference input standard"
    ::= { paramEntry 53 }

referenceSource OBJECT-TYPE
    SYNTAX TypeReferenceSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
    ::= { paramEntry 54 }

syncMode OBJECT-TYPE
    SYNTAX TypeSyncMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Line synchronizer mode"
    ::= { paramEntry 55 }

delayLine OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delay lines. Combine with DelayPixel and DelayQuarterPixel for total delay"
    ::= { paramEntry 56 }

delayPixel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delay pixel. Combined with DelayLine and DelayQuarterPixel for total delay"
    ::= { paramEntry 57 }

delayQuarterPixel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delay by quarter pixel. Combined with DelayLine and DelayPixel for total delay"
    ::= { paramEntry 58 }

delayUs OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "total delay in us"
    ::= { paramEntry 59 }

phase OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase adjust"
    ::= { paramEntry 60 }

colorBurstPhase OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Color burst phase adjust"
    ::= { paramEntry 61 }

palM OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "produce output according to PAL M standard (applies to 525 output format only)"
    ::= { paramEntry 64 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 65 }

eventSDIInputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInputNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input No Input (input signal can not be detected)"
    ::= { paramEntry 66 }

eventstandardmismatchSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInputNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: standard mismatch ((in linesync mode): reference and SDI standards dont match)"
    ::= { paramEntry 67 }

eventReferenceNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInputNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Reference No Input (reference input signal can not be detected)"
    ::= { paramEntry 68 }

event525videoreferenceSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInputNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 525 video reference"
    ::= { paramEntry 69 }

event525videoinputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInputNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 525 video input"
    ::= { paramEntry 70 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 71 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of CDA5011 parameters"
    ::= { sw127 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of CDA5011 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventSDIInputNoInput OnOffValue,
    eventstandardmismatch OnOffValue,
    eventReferenceNoInput OnOffValue,
    event525videoreference OnOffValue,
    event525videoinput OnOffValue,
    inputStandard TypeInputStandard,
    out1 TypeOut1,
    out2 TypeOut2,
    standardSelect TypeStandardSelect,
    pedestal OnOffValue,
    testPattern TypeTestPattern,
    testPatternSelect TypeTestPatternSelect,
    testPatternON OnOffValue,
    autoTestPattern TypeAutoTestPattern,
    autoTestPatternON OnOffValue,
    yLevel TypeYLevel,
    uVLevel TypeUVLevel,
    limiter TypeLimiter,
    yUVLevelAdjust TypeYUVLevelAdjust,
    luminanceLevel FixedPointValue2,
    uLevel FixedPointValue2,
    vLevel FixedPointValue2,
    blackLevelAdjust TypeYUVLevelAdjust,
    blackLevel FixedPointValue1,
    sharpnessAdjust TypeYUVLevelAdjust,
    sharpness Integer32,
    hueAdjust TypeYUVLevelAdjust,
    hue FixedPointValue1,
    luminanceFilter TypeLuminanceFilter,
    chrominanceFilter TypeChrominanceFilter,
    blankVBI TypeBlankVBI,
    chromCtl TypeChromCtl,
    burstCtrl TypeChromCtl,
    activeLineDuration TypeActiveLineDuration,
    lumaDelay TypeLumaDelay,
    chromaDelay TypeChromaDelay,
    doubleBuf OnOffValue,
    referenceStandard TypeInputStandard,
    referenceSource TypeReferenceSource,
    syncMode TypeSyncMode,
    delayLine Integer32,
    delayPixel Integer32,
    delayQuarterPixel Integer32,
    delayUs Integer32,
    phase Integer32,
    colorBurstPhase Integer32,
    palM OnOffValue,
    boardID Integer32,
    eventSDIInputNoInputSNMP TypeEventSDIInputNoInputSNMP,
    eventstandardmismatchSNMP TypeEventSDIInputNoInputSNMP,
    eventReferenceNoInputSNMP TypeEventSDIInputNoInputSNMP,
    event525videoreferenceSNMP TypeEventSDIInputNoInputSNMP,
    event525videoinputSNMP TypeEventSDIInputNoInputSNMP,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of CDA5011"
    ::= { sw127 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventSDIInputNoInput,
        eventstandardmismatch,
        eventReferenceNoInput,
        event525videoreference,
        event525videoinput,
        inputStandard,
        out1,
        out2,
        standardSelect,
        pedestal,
        testPattern,
        testPatternSelect,
        testPatternON,
        autoTestPattern,
        autoTestPatternON,
        yLevel,
        uVLevel,
        limiter,
        yUVLevelAdjust,
        luminanceLevel,
        uLevel,
        vLevel,
        blackLevelAdjust,
        blackLevel,
        sharpnessAdjust,
        sharpness,
        hueAdjust,
        hue,
        luminanceFilter,
        chrominanceFilter,
        blankVBI,
        chromCtl,
        burstCtrl,
        activeLineDuration,
        lumaDelay,
        chromaDelay,
        doubleBuf,
        referenceStandard,
        referenceSource,
        syncMode,
        delayLine,
        delayPixel,
        delayQuarterPixel,
        delayUs,
        phase,
        colorBurstPhase,
        palM,
        boardID,
        eventSDIInputNoInputSNMP,
        eventstandardmismatchSNMP,
        eventReferenceNoInputSNMP,
        event525videoreferenceSNMP,
        event525videoinputSNMP,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END