-- Machine generated MIB file, do not edit!
--
-- MIB file for CDH1411, type code 42.30, software label 1058
-- Generated on Friday, 30-Sep-22 10:24:59 CEST
-- CVS $Id: CDH1411_4230_sw1058.mib,v 1.3 2022/09/30 08:24:59 til Exp $
--
-- Copyright 2003-2022 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

CDH1411-4230-sw1058-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

cdh1411-4230-sw1058 MODULE-IDENTITY
    LAST-UPDATED "202209300824Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for CDH1411, type code 42.30, software label 1058"
    REVISION "202209300824Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 16945058 }

cdh1411-4230 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type CDH1411"
    ::= { products 16944 }

sw1058 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 1058"
    ::= { cdh1411-4230 1058 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeInputSDI1VideoLedPresentColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        offX(1),
        green(2),
        greenX(3)
    }

TypeInputSDI1VideoLedPresentColorRGB ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n000000(0),
        n000000X(1),
        n00ff00(2),
        n00ff00X(3)
    }

TypeInputSourceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        bnc(0),
        sfp(1)
    }

TypeInputSelectMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        man(0),
        auto(1)
    }

TypeInputSelectManual ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        sfp(0),
        bnc(1)
    }

TypeInputSDI1VideoStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27),
        n2160p60(28),
        n2160p5994(29),
        n2160p50(30),
        n2160p30(31),
        n2160p2997(32),
        n2160p25(33),
        n2160p24(34),
        n2160p2398(35),
        n6G(36),
        n12G(37)
    }

TypeInputSDI1VideoFormat ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        yCbCr42210Bit(0),
        yCbCr42210BitDCI(1),
        yCbCr44410Bit(2),
        yCbCr44410BitDCI(3),
        rGB10Bit(4),
        rGB10BitDCI(5),
        rGB10BitX(6),
        rGB10BitDCIX(7),
        yCbCr42212Bit(8),
        yCbCr42212BitDCI(9),
        yCbCr44412Bit(10),
        yCbCr44412BitDCI(11),
        rGB12Bit(12),
        rGB12BitDCI(13),
        rGB12BitX(14),
        rGB12BitDCIX(15),
        levelAYCbCr42210Bit(16),
        levelAYCbCr42210BitDCI(17),
        levelAYCbCr44410Bit(18),
        levelAYCbCr44410BitDCI(19),
        levelARGB10Bit(20),
        levelARGB10BitDCI(21),
        levelARGB10BitX(22),
        levelARGB10BitDCIX(23),
        levelAYCbCr42212Bit(24),
        levelAYCbCr42212BitDCI(25),
        levelAYCbCr44412Bit(26),
        levelAYCbCr44412BitDCI(27),
        levelARGB12Bit(28),
        levelARGB12BitDCI(29),
        levelARGB12BitX(30),
        levelARGB12BitDCIX(31),
        levelBDLYCbCr42210Bit(32),
        levelBDLYCbCr42210BitDCI(33),
        levelBDLYCbCr44410Bit(34),
        levelBDLYCbCr44410BitDCI(35),
        levelBDLRGB10Bit(36),
        levelBDLRGB10BitDCI(37),
        levelBDLRGB10BitX(38),
        levelBDLRGB10BitDCIX(39),
        levelBDLYCbCr42212Bit(40),
        levelBDLYCbCr42212BitDCI(41),
        levelBDLYCbCr44412Bit(42),
        levelBDLYCbCr44412BitDCI(43),
        levelBDLRGB12Bit(44),
        levelBDLRGB12BitDCI(45),
        levelBDLRGB12BitX(46),
        levelBDLRGB12BitDCIX(47),
        levelBDSYCbCr42210Bit(48),
        levelBDSYCbCr42210BitDCI(49),
        levelBDSYCbCr44410Bit(50),
        levelBDSYCbCr44410BitDCI(51),
        levelBDSRGB10Bit(52),
        levelBDSRGB10BitDCI(53),
        levelBDSRGB10BitX(54),
        levelBDSRGB10BitDCIX(55),
        levelBDSYCbCr42212Bit(56),
        levelBDSYCbCr42212BitDCI(57),
        levelBDSYCbCr44412Bit(58),
        levelBDSYCbCr44412BitDCI(59),
        levelBDSRGB12Bit(60),
        levelBDSRGB12BitDCI(61),
        levelBDSRGB12BitX(62),
        levelBDSRGB12BitDCIX(63)
    }

TypeInputSDIVideoColorRange ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        limited(1),
        full(2)
    }

TypeInputSDIVideoColorRangeStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        limited(0),
        full(1)
    }

TypeInputSDIVideoColorSpaceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        n420(1),
        n422(2),
        n444(3),
        rgb(4)
    }

TypeInputSDIVideoColorimetryStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        bT601(1),
        bT709(2),
        bT2020(3),
        vANCNotSupported(4)
    }

TypeInputSDIVideoEOTFStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        sdr(1),
        hlg(2),
        pq(3)
    }

TypeInputSDIAudioGroupPresent01 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        present(0),
        notEmbedded(1)
    }

TypeOutputAudioSourceAudioOut ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        ch12(1),
        ch34(2),
        ch56(3),
        ch78(4),
        ch910(5),
        ch1112(6),
        ch1314(7),
        ch1516(8),
        ch1724(9),
        ch2532(10),
        ch3340(11),
        ch4148(12),
        ch4956(13),
        ch5764(14)
    }

TypeOutputAudioSource3GLevelB ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        streamA(0),
        streamB(1)
    }

TypeOutputAudioAnalogFSLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        mute(0),
        lineCons(1),
        n24DBu(2),
        n22DBu(3),
        n20DBu(4),
        n18DBu(5),
        n15DBu(6),
        n12DBu(7),
        linePro(8),
        user(9)
    }

TypeOutputHDMIVideoBitDepth ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        n8Bit(1),
        n10Bit(2),
        n12Bit(3)
    }

TypeOutputHDMIVideoBitDepthStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n8Bit(0),
        n10Bit(1),
        n12Bit(2)
    }

TypeOutputHDMIVideoColorSpace ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        rgb(1),
        yCbCr422(2),
        yCbCr444(3),
        yCbCr420(4)
    }

TypeOutputHDMIVideoColorSpaceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        rgb(0),
        yCbCr422(1),
        yCbCr444(2),
        yCbCr420(3)
    }

TypeOutputHDMIVideoColorRange ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        default(0),
        limited(1),
        full(2)
    }

TypeOutputHDMIVideoColorimetry ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        bT709(1),
        bT2020(2)
    }

TypeOutputHDMIVideoColorimetryStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        bT709(0),
        bT2020(1)
    }

TypeOutputHDMIVideoEOTF ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        gammaSDR(1),
        gammaHDR(2),
        sT2084PQ(3),
        hlg(4)
    }

TypeOutputHDMIVideoEOTFStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        gammaSDR(0),
        gammaHDR(1),
        sT2084PQ(2),
        hlg(3)
    }

TypeOutputHDMIVideoITContentType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        photo(0),
        graphics(1),
        cinema(2),
        game(3),
        none(4)
    }

TypeOutputHDMIVideoHVDelay ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        noDelay(0),
        hDelay(1),
        vDelay(2),
        hVDelay(3)
    }

TypeOutputHDMIVideoFlipSignal ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        noFlip(0),
        h(1)
    }

TypeOutputHDMIAudioEmbedMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n2CH(0),
        n8CH(1)
    }

TypeOutputHDMIAudioAudioChannelAssignment ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n11(0),
        convert(1)
    }

TypeOverlayCenterCrossEnable ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeOverlayAspectRatioMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        n43(1),
        n169(2)
    }

TypeOverlayCurtainTransparency ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n100(0),
        n90(1),
        n80(2),
        n70(3),
        n60(4),
        n50(5),
        n40(6),
        n30(7)
    }

TypeOverlaySafeAreaMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        sMPTESafeAction9090(1),
        sMPTESafeTitle8080(2),
        eBUAction3535(3),
        eBUGraphics510(4)
    }

TypeOverlaySafeAreaColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        white(0),
        yellow(1),
        cyan(2),
        green(3),
        magenta(4),
        red(5),
        blue(6),
        black(7)
    }

TypeOverlayClosedCaptionServiceNumber ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n1(0),
        n2(1),
        n3(2),
        n4(3),
        n5(4),
        n6(5)
    }

TypeOverlayClosedCaptionBGTransparency ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0(0),
        n50(1)
    }

TypeEventHDMIOutputSignaloutofrangeSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 8 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 9 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 10 }

inputSDI1VideoLedPresentColor OBJECT-TYPE
    SYNTAX TypeInputSDI1VideoLedPresentColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices SDI 1 LED (off/green)"
    ::= { paramEntry 11 }

inputSDI1VideoLedPresentColorRGB OBJECT-TYPE
    SYNTAX TypeInputSDI1VideoLedPresentColorRGB
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices SDI 1 LED as #RRGGBB"
    ::= { paramEntry 12 }

inputSDIAudioLedPresentColor OBJECT-TYPE
    SYNTAX TypeInputSDI1VideoLedPresentColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Audio Present LED (off/green)"
    ::= { paramEntry 13 }

inputSDIAudioLedPresentColorRGB OBJECT-TYPE
    SYNTAX TypeInputSDI1VideoLedPresentColorRGB
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Audio Present LED as #RRGGBB"
    ::= { paramEntry 14 }

inputSDI2OpticalLedRxColor OBJECT-TYPE
    SYNTAX TypeInputSDI1VideoLedPresentColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices RX LED (off/green)"
    ::= { paramEntry 15 }

inputSDI2OpticalLedRxColorRGB OBJECT-TYPE
    SYNTAX TypeInputSDI1VideoLedPresentColorRGB
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices RX LED as #RRGGBB"
    ::= { paramEntry 16 }

inputSourceStatus OBJECT-TYPE
    SYNTAX TypeInputSourceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input Active Source"
    ::= { paramEntry 18 }

inputSelectMode OBJECT-TYPE
    SYNTAX TypeInputSelectMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Auto Mode will switch input to SFP if BNC is missing."
    ::= { paramEntry 19 }

inputSelectModeSwitchPosition OBJECT-TYPE
    SYNTAX TypeInputSelectMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Auto Mode will switch input to SFP if BNC is missing."
    ::= { paramEntry 20 }

inputSelectManual OBJECT-TYPE
    SYNTAX TypeInputSelectManual
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Input Select for Manual Input Mode."
    ::= { paramEntry 21 }

inputSelectManualSwitchPosition OBJECT-TYPE
    SYNTAX TypeInputSelectManual
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input Select for Manual Input Mode."
    ::= { paramEntry 22 }

inputSDI1VideoStandard OBJECT-TYPE
    SYNTAX TypeInputSDI1VideoStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of electrical SDI 1 input."
    ::= { paramEntry 23 }

inputSDI1VideoFormat OBJECT-TYPE
    SYNTAX TypeInputSDI1VideoFormat
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Format of electrical SDI 1 input."
    ::= { paramEntry 24 }

inputSDI2VideoStandard OBJECT-TYPE
    SYNTAX TypeInputSDI1VideoStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of optical SDI 2 input."
    ::= { paramEntry 25 }

inputSDI2VideoFormat OBJECT-TYPE
    SYNTAX TypeInputSDI1VideoFormat
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Format of optical SDI 2 input."
    ::= { paramEntry 26 }

inputSDI2OpticalSFPModulePartNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of used SFP Module"
    ::= { paramEntry 27 }

inputSDI2OpticalSFPModuleType OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the type of detected SFP Module. The SFP part number will be displayed if SFP Module is unknown."
    ::= { paramEntry 28 }

inputSDI2OpticalBudget OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays budget on optical input."
    ::= { paramEntry 29 }

inputSDIVideoColorRange OBJECT-TYPE
    SYNTAX TypeInputSDIVideoColorRange
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select color range for SDI input.<br>Auto (default value) will choose the color range based on SDI input standard and VPID information."
    ::= { paramEntry 30 }

inputSDIVideoColorRangeStatus OBJECT-TYPE
    SYNTAX TypeInputSDIVideoColorRangeStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows color range of SDI input."
    ::= { paramEntry 31 }

inputSDIVideoColorSpaceStatus OBJECT-TYPE
    SYNTAX TypeInputSDIVideoColorSpaceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows color space of SDI input."
    ::= { paramEntry 32 }

inputSDIVideoColorimetryStatus OBJECT-TYPE
    SYNTAX TypeInputSDIVideoColorimetryStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows colorimetry of SDI input."
    ::= { paramEntry 33 }

inputSDIVideoEOTFStatus OBJECT-TYPE
    SYNTAX TypeInputSDIVideoEOTFStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows EOTF of SDI Input"
    ::= { paramEntry 34 }

inputSDIAudioGroupPresent01 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1"
    ::= { paramEntry 35 }

inputSDIAudioGroupPresent02 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2"
    ::= { paramEntry 36 }

inputSDIAudioGroupPresent03 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3"
    ::= { paramEntry 37 }

inputSDIAudioGroupPresent04 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4"
    ::= { paramEntry 38 }

inputSDIAudioGroupPresent05 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 5"
    ::= { paramEntry 39 }

inputSDIAudioGroupPresent06 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 6"
    ::= { paramEntry 40 }

inputSDIAudioGroupPresent07 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 7"
    ::= { paramEntry 41 }

inputSDIAudioGroupPresent08 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 8"
    ::= { paramEntry 42 }

inputSDIAudioGroupPresent09 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 9"
    ::= { paramEntry 43 }

inputSDIAudioGroupPresent10 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 10"
    ::= { paramEntry 44 }

inputSDIAudioGroupPresent11 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 11"
    ::= { paramEntry 45 }

inputSDIAudioGroupPresent12 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 12"
    ::= { paramEntry 46 }

inputSDIAudioGroupPresent13 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 13"
    ::= { paramEntry 47 }

inputSDIAudioGroupPresent14 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 14"
    ::= { paramEntry 48 }

inputSDIAudioGroupPresent15 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 15"
    ::= { paramEntry 49 }

inputSDIAudioGroupPresent16 OBJECT-TYPE
    SYNTAX TypeInputSDIAudioGroupPresent01
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 16"
    ::= { paramEntry 50 }

outputAudioSourceAudioOut OBJECT-TYPE
    SYNTAX TypeOutputAudioSourceAudioOut
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for audio output"
    ::= { paramEntry 51 }

outputAudioSourceAudioOutSwitchPosition OBJECT-TYPE
    SYNTAX TypeOutputAudioSourceAudioOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Source for audio output"
    ::= { paramEntry 52 }

outputAudioSource3GLevelB OBJECT-TYPE
    SYNTAX TypeOutputAudioSource3GLevelB
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the 3G Level B Audio Source"
    ::= { paramEntry 53 }

outputAudioAnalogFSLevel OBJECT-TYPE
    SYNTAX TypeOutputAudioAnalogFSLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Full-Scale level for analog audio output"
    ::= { paramEntry 54 }

outputAudioAnalogFSLevelSwitchPosition OBJECT-TYPE
    SYNTAX TypeOutputAudioAnalogFSLevel
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-Scale level for analog audio output"
    ::= { paramEntry 55 }

outputAudioAnalogFSLevelUser OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Full-Scale level for analog audio output if User is selected"
    ::= { paramEntry 56 }

outputHDMIVideoStandard OBJECT-TYPE
    SYNTAX TypeInputSDI1VideoStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of HDMI output."
    ::= { paramEntry 57 }

outputHDMIVideoBitDepth OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoBitDepth
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set bit depth for HDMI output.<br>Per default (auto), the bit depth will be selected based on the EDID information provided by the HDMI destination."
    ::= { paramEntry 58 }

outputHDMIVideoBitDepthStatus OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoBitDepthStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the used HDMI Bit depth"
    ::= { paramEntry 59 }

outputHDMIVideoColorSpace OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoColorSpace
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select color space for HDMI output.<br>Per default (auto), the color space will be selected based on the EDID information provided by the HDMI destination."
    ::= { paramEntry 60 }

outputHDMIVideoColorSpaceStatus OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoColorSpaceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the used HDMI Colorspace"
    ::= { paramEntry 61 }

outputHDMIVideoColorRange OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoColorRange
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select color range for HDMI output.<br>Per default, the color range will be selected based on the EDID information provided by the HDMI destination."
    ::= { paramEntry 62 }

outputHDMIVideoColorRangeStatus OBJECT-TYPE
    SYNTAX TypeInputSDIVideoColorRangeStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the used HDMI Color Rage"
    ::= { paramEntry 63 }

outputHDMIVideoColorimetry OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoColorimetry
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Selects how the HDMI output is marked and which Conversion-Matrix is used when converting between YCbCr and RGB.<br>There is no conversion between different colorimetries.As per the Auto (default value), the colorimetry will be selected based on the SDI input and/or VPID information."
    ::= { paramEntry 64 }

outputHDMIVideoColorimetryStatus OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoColorimetryStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the used HDMI Colorimetry"
    ::= { paramEntry 65 }

outputHDMIVideoEOTF OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoEOTF
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Selects how the HDMI output is marked.<br>There is no conversion between different EOTFs.As per the Auto (default value), the EOTF will be selected based on the SDI input and/or VPID information."
    ::= { paramEntry 66 }

outputHDMIVideoEOTFStatus OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoEOTFStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the used HDMI EOTF"
    ::= { paramEntry 67 }

outputHDMIVideoITContentType OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoITContentType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the IT Content Type for the HDMI output signal according to CEA-861-E."
    ::= { paramEntry 68 }

outputHDMIVideoHVDelay OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoHVDelay
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Shift the active image content in H and/or V direction<br>so that the H/V interval becomes visible in the center of the display."
    ::= { paramEntry 69 }

outputHDMIVideoFlipSignal OBJECT-TYPE
    SYNTAX TypeOutputHDMIVideoFlipSignal
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Flip/mirror the picture content."
    ::= { paramEntry 70 }

outputHDMIAudioEmbed OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed Audio into HDMI."
    ::= { paramEntry 71 }

outputHDMIAudioEmbedSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Embed Audio into HDMI."
    ::= { paramEntry 72 }

outputHDMIAudioEmbedMode OBJECT-TYPE
    SYNTAX TypeOutputHDMIAudioEmbedMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Number of audio channels embedded into HDMI."
    ::= { paramEntry 73 }

outputHDMIAudioEmbedModeSwitchPosition OBJECT-TYPE
    SYNTAX TypeOutputHDMIAudioEmbedMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Number of audio channels embedded into HDMI."
    ::= { paramEntry 74 }

outputHDMIAudioAudioChannelAssignment OBJECT-TYPE
    SYNTAX TypeOutputHDMIAudioAudioChannelAssignment
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Switch between different allocations of audio channels.<br>By default, all audio channels (1 through 8) are mapped <b>1:1</b> between SDI and HDMI.  If set to <b>convert</b>, channels 3 and 4 are swapped against each other, resulting in a conversion between the allocation according to SMPTE320M (3=Center /4=LFE) and CEA-861 (3=LFE / 4=FrontCenter)."
    ::= { paramEntry 75 }

overlayOthersEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show other Overlays like Metadata, ALMs, SAMs, ARMs, Center Cross and Video Standard."
    ::= { paramEntry 76 }

overlayOthersEnableSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Show other Overlays like Metadata, ALMs, SAMs, ARMs, Center Cross and Video Standard."
    ::= { paramEntry 77 }

overlayTimeCodeEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show TimeCode Overlay."
    ::= { paramEntry 78 }

overlayTimeCodeEnableSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Show TimeCode Overlay."
    ::= { paramEntry 79 }

overlayClosedCaptionEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show Closed Captions Overlay."
    ::= { paramEntry 80 }

overlayClosedCaptionEnableSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Show Closed Captions Overlay."
    ::= { paramEntry 81 }

overlayLoopBackEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show Overlays on SDI Loop Out."
    ::= { paramEntry 82 }

overlayLoopBackEnableSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Show Overlays on SDI Loop Out."
    ::= { paramEntry 83 }

overlayTimeCodeAutomaticEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Let the device select the shown timecodes automatically"
    ::= { paramEntry 84 }

overlayTimeCodeATCLTCEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show the ATC LTC timecode in the HDMI output signal"
    ::= { paramEntry 85 }

overlayTimeCodeATCVITCEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show the ATC VITC timecode in the HDMI output signal"
    ::= { paramEntry 86 }

overlayVideoStandardEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show Video Standard and VPID Overlay.<br>NOTE that these overlays are shown only if the <i>Other Overlays</i> DIP switch (on the yellobrik case) is set to ON."
    ::= { paramEntry 87 }

overlayAudioLevelMeterEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show Audio Level Meter Overlay.<br>NOTE that these overlays are shown only if the <i>Other Overlays</i> DIP switch (on the yellobrik case) is set to ON."
    ::= { paramEntry 88 }

overlayCenterCrossEnable OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert a cross marker in the center of the active image<br> as defined by EBU R95-2008.<br>NOTE that these markers are shown only if the <i>Other Overlays</i> DIP switch (on the yellobrik case) is set to ON."
    ::= { paramEntry 89 }

overlayAspectRatioMode OBJECT-TYPE
    SYNTAX TypeOverlayAspectRatioMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert two lines to mark the border of the selected aspect ratio content<br> as defined by SMPTE RP218-2002 / EBU R95-2008. The areas outside of these markers can be reduced in transparency: see parameter <i>Curtain Transparency</i>. NOTE that these markers are shown only if the <i>Other Overlays</i> DIP switch (on the yellobrik case) is set to ON."
    ::= { paramEntry 90 }

overlayCurtainTransparency OBJECT-TYPE
    SYNTAX TypeOverlayCurtainTransparency
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Define level of transparency<br> for the areas outside of the <i>Aspect Ratio Markers</i> (as enabled by switch <i>Aspect Ratio Marker</i>). By default, those areas are shown unmodified (100% transparency). This switch allows for a reduction of luminance in these <i>out-of-bounds</i> areas."
    ::= { paramEntry 91 }

overlaySafeAreaMode OBJECT-TYPE
    SYNTAX TypeOverlaySafeAreaMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Define the position of the safe area markers overlay.<br>The choice is between various positions as defined in SMPTE RP218-2002 as well as those define in EBU R95-2008. NOTE that these markers are shown only if the <i>Other Overlays</i> DIP switch (on the yellobrik case) is set to ON."
    ::= { paramEntry 92 }

overlaySafeAreaFromAspectRatio OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set relation of Safe Area Marker Lines.<br>By default, the safe area marker lines (as specified by switch <i>Safe Area Marker</i>) are shown relative to the <i>Aspect Ratio Marker</i> (if enabled). This switch can specify that the <i>Safe Area Marker</i> lines shall be placed relative to the outline of the active picture, independent of the position of the <i>Aspect Ratio Marker</i>."
    ::= { paramEntry 93 }

overlaySafeAreaColor OBJECT-TYPE
    SYNTAX TypeOverlaySafeAreaColor
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Safe Area Marker Color.<br>By default, all Safe Area Marker Overlays are generated in white color. This color can be customized here."
    ::= { paramEntry 94 }

overlayClosedCaptionServiceNumber OBJECT-TYPE
    SYNTAX TypeOverlayClosedCaptionServiceNumber
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the captioning service that should be used for the CC overlay."
    ::= { paramEntry 95 }

overlayClosedCaptionBGTransparency OBJECT-TYPE
    SYNTAX TypeOverlayClosedCaptionBGTransparency
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the level of transparency of the CC overlay background."
    ::= { paramEntry 96 }

overlayClosedCaptionStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/ClosedCaption/StartPosV"
    ::= { paramEntry 97 }

overlayCenterCrossMarkerHorEnable OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/CenterCross/Marker/Hor/Enable"
    ::= { paramEntry 98 }

overlayCenterCrossMarkerHorEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/CenterCross/Marker/Hor/EndPosH"
    ::= { paramEntry 99 }

overlayCenterCrossMarkerHorEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/CenterCross/Marker/Hor/EndPosV"
    ::= { paramEntry 100 }

overlayCenterCrossMarkerHorStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/CenterCross/Marker/Hor/StartPosH"
    ::= { paramEntry 101 }

overlayCenterCrossMarkerHorStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/CenterCross/Marker/Hor/StartPosV"
    ::= { paramEntry 102 }

overlayCenterCrossMarkerVertEnable OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/CenterCross/Marker/Vert/Enable"
    ::= { paramEntry 103 }

overlayCenterCrossMarkerVertEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/CenterCross/Marker/Vert/EndPosH"
    ::= { paramEntry 104 }

overlayCenterCrossMarkerVertEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/CenterCross/Marker/Vert/EndPosV"
    ::= { paramEntry 105 }

overlayCenterCrossMarkerVertStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/CenterCross/Marker/Vert/StartPosH"
    ::= { paramEntry 106 }

overlayCenterCrossMarkerVertStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/CenterCross/Marker/Vert/StartPosV"
    ::= { paramEntry 107 }

overlayAspectRatioMarkerLeftEnable OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/AspectRatio/Marker/Left/Enable"
    ::= { paramEntry 108 }

overlayAspectRatioMarkerLeftEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/AspectRatio/Marker/Left/EndPosH"
    ::= { paramEntry 109 }

overlayAspectRatioMarkerLeftEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/AspectRatio/Marker/Left/EndPosV"
    ::= { paramEntry 110 }

overlayAspectRatioMarkerLeftStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/AspectRatio/Marker/Left/StartPosH"
    ::= { paramEntry 111 }

overlayAspectRatioMarkerLeftStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/AspectRatio/Marker/Left/StartPosV"
    ::= { paramEntry 112 }

overlayAspectRatioMarkerRightEnable OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/AspectRatio/Marker/Right/Enable"
    ::= { paramEntry 113 }

overlayAspectRatioMarkerRightEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/AspectRatio/Marker/Right/EndPosH"
    ::= { paramEntry 114 }

overlayAspectRatioMarkerRightEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/AspectRatio/Marker/Right/EndPosV"
    ::= { paramEntry 115 }

overlayAspectRatioMarkerRightStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/AspectRatio/Marker/Right/StartPosH"
    ::= { paramEntry 116 }

overlayAspectRatioMarkerRightStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/AspectRatio/Marker/Right/StartPosV"
    ::= { paramEntry 117 }

overlayCurtainMarkerLeftEnable OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/Curtain/Marker/Left/Enable"
    ::= { paramEntry 118 }

overlayCurtainMarkerLeftEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/Curtain/Marker/Left/EndPosH"
    ::= { paramEntry 119 }

overlayCurtainMarkerLeftEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/Curtain/Marker/Left/EndPosV"
    ::= { paramEntry 120 }

overlayCurtainMarkerLeftStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/Curtain/Marker/Left/StartPosH"
    ::= { paramEntry 121 }

overlayCurtainMarkerLeftStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/Curtain/Marker/Left/StartPosV"
    ::= { paramEntry 122 }

overlayCurtainMarkerRightEnable OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/Curtain/Marker/Right/Enable"
    ::= { paramEntry 123 }

overlayCurtainMarkerRightEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/Curtain/Marker/Right/EndPosH"
    ::= { paramEntry 124 }

overlayCurtainMarkerRightEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/Curtain/Marker/Right/EndPosV"
    ::= { paramEntry 125 }

overlayCurtainMarkerRightStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/Curtain/Marker/Right/StartPosH"
    ::= { paramEntry 126 }

overlayCurtainMarkerRightStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/Curtain/Marker/Right/StartPosV"
    ::= { paramEntry 127 }

overlaySafeAreaMarkerTopEnable OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Top/Enable"
    ::= { paramEntry 128 }

overlaySafeAreaMarkerTopEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Top/EndPosH"
    ::= { paramEntry 129 }

overlaySafeAreaMarkerTopEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Top/EndPosV"
    ::= { paramEntry 130 }

overlaySafeAreaMarkerTopStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Top/StartPosH"
    ::= { paramEntry 131 }

overlaySafeAreaMarkerTopStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Top/StartPosV"
    ::= { paramEntry 132 }

overlaySafeAreaMarkerBottomEnable OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Bottom/Enable"
    ::= { paramEntry 133 }

overlaySafeAreaMarkerBottomEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Bottom/EndPosH"
    ::= { paramEntry 134 }

overlaySafeAreaMarkerBottomEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Bottom/EndPosV"
    ::= { paramEntry 135 }

overlaySafeAreaMarkerBottomStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Bottom/StartPosH"
    ::= { paramEntry 136 }

overlaySafeAreaMarkerBottomStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Bottom/StartPosV"
    ::= { paramEntry 137 }

overlaySafeAreaMarkerLeftEnable OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Left/Enable"
    ::= { paramEntry 138 }

overlaySafeAreaMarkerLeftEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Left/EndPosH"
    ::= { paramEntry 139 }

overlaySafeAreaMarkerLeftEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Left/EndPosV"
    ::= { paramEntry 140 }

overlaySafeAreaMarkerLeftStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Left/StartPosH"
    ::= { paramEntry 141 }

overlaySafeAreaMarkerLeftStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Left/StartPosV"
    ::= { paramEntry 142 }

overlaySafeAreaMarkerRightEnable OBJECT-TYPE
    SYNTAX TypeOverlayCenterCrossEnable
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Right/Enable"
    ::= { paramEntry 143 }

overlaySafeAreaMarkerRightEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Right/EndPosH"
    ::= { paramEntry 144 }

overlaySafeAreaMarkerRightEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Right/EndPosV"
    ::= { paramEntry 145 }

overlaySafeAreaMarkerRightStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Right/StartPosH"
    ::= { paramEntry 146 }

overlaySafeAreaMarkerRightStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Overlay/SafeArea/Marker/Right/StartPosV"
    ::= { paramEntry 147 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 148 }

eventHDMIOutputSignaloutofrange OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: HDMI Output Signal out of range"
    ::= { paramEntry 149 }

eventHDMIOutputSignaloutofrangeSNMP OBJECT-TYPE
    SYNTAX TypeEventHDMIOutputSignaloutofrangeSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: HDMI Output Signal out of range"
    ::= { paramEntry 150 }

outputHDMISinkTMDSExceeded OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows if the output exceeds the HDMI Sinks supported TMDS clock."
    ::= { paramEntry 151 }

outputHDMISinkEDIDPart1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Part 1 of HDMI Sinks EDID."
    ::= { paramEntry 152 }

outputHDMISinkEDIDPart2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Part 2 of HDMI Sinks EDID."
    ::= { paramEntry 153 }

outputHDMISinkEDID OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HDMI Sinks EDID."
    ::= { paramEntry 154 }

outputAudioDownmix51 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable 5.1 stereo downmix<br>Select if AES Audio Output, Analog Audio Output and HDMI embedded Audio (in 2CH Embed Mode only) should contain a 5.1 to stereo downmix instead of an unprocessed stereo channel. Only supports downmixing of PCM audio, no encoded audio. The audio channels used for downmixing are detemined by the Audio Select parameter."
    ::= { paramEntry 155 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of CDH1411 parameters"
    ::= { sw1058 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of CDH1411 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    locate OnOffValue,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    inputSDI1VideoLedPresentColor TypeInputSDI1VideoLedPresentColor,
    inputSDI1VideoLedPresentColorRGB TypeInputSDI1VideoLedPresentColorRGB,
    inputSDIAudioLedPresentColor TypeInputSDI1VideoLedPresentColor,
    inputSDIAudioLedPresentColorRGB TypeInputSDI1VideoLedPresentColorRGB,
    inputSDI2OpticalLedRxColor TypeInputSDI1VideoLedPresentColor,
    inputSDI2OpticalLedRxColorRGB TypeInputSDI1VideoLedPresentColorRGB,
    inputSourceStatus TypeInputSourceStatus,
    inputSelectMode TypeInputSelectMode,
    inputSelectModeSwitchPosition TypeInputSelectMode,
    inputSelectManual TypeInputSelectManual,
    inputSelectManualSwitchPosition TypeInputSelectManual,
    inputSDI1VideoStandard TypeInputSDI1VideoStandard,
    inputSDI1VideoFormat TypeInputSDI1VideoFormat,
    inputSDI2VideoStandard TypeInputSDI1VideoStandard,
    inputSDI2VideoFormat TypeInputSDI1VideoFormat,
    inputSDI2OpticalSFPModulePartNumber DisplayString,
    inputSDI2OpticalSFPModuleType DisplayString,
    inputSDI2OpticalBudget FixedPointValue1,
    inputSDIVideoColorRange TypeInputSDIVideoColorRange,
    inputSDIVideoColorRangeStatus TypeInputSDIVideoColorRangeStatus,
    inputSDIVideoColorSpaceStatus TypeInputSDIVideoColorSpaceStatus,
    inputSDIVideoColorimetryStatus TypeInputSDIVideoColorimetryStatus,
    inputSDIVideoEOTFStatus TypeInputSDIVideoEOTFStatus,
    inputSDIAudioGroupPresent01 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent02 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent03 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent04 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent05 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent06 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent07 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent08 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent09 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent10 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent11 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent12 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent13 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent14 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent15 TypeInputSDIAudioGroupPresent01,
    inputSDIAudioGroupPresent16 TypeInputSDIAudioGroupPresent01,
    outputAudioSourceAudioOut TypeOutputAudioSourceAudioOut,
    outputAudioSourceAudioOutSwitchPosition TypeOutputAudioSourceAudioOut,
    outputAudioSource3GLevelB TypeOutputAudioSource3GLevelB,
    outputAudioAnalogFSLevel TypeOutputAudioAnalogFSLevel,
    outputAudioAnalogFSLevelSwitchPosition TypeOutputAudioAnalogFSLevel,
    outputAudioAnalogFSLevelUser FixedPointValue1,
    outputHDMIVideoStandard TypeInputSDI1VideoStandard,
    outputHDMIVideoBitDepth TypeOutputHDMIVideoBitDepth,
    outputHDMIVideoBitDepthStatus TypeOutputHDMIVideoBitDepthStatus,
    outputHDMIVideoColorSpace TypeOutputHDMIVideoColorSpace,
    outputHDMIVideoColorSpaceStatus TypeOutputHDMIVideoColorSpaceStatus,
    outputHDMIVideoColorRange TypeOutputHDMIVideoColorRange,
    outputHDMIVideoColorRangeStatus TypeInputSDIVideoColorRangeStatus,
    outputHDMIVideoColorimetry TypeOutputHDMIVideoColorimetry,
    outputHDMIVideoColorimetryStatus TypeOutputHDMIVideoColorimetryStatus,
    outputHDMIVideoEOTF TypeOutputHDMIVideoEOTF,
    outputHDMIVideoEOTFStatus TypeOutputHDMIVideoEOTFStatus,
    outputHDMIVideoITContentType TypeOutputHDMIVideoITContentType,
    outputHDMIVideoHVDelay TypeOutputHDMIVideoHVDelay,
    outputHDMIVideoFlipSignal TypeOutputHDMIVideoFlipSignal,
    outputHDMIAudioEmbed OnOffValue,
    outputHDMIAudioEmbedSwitchPosition OnOffValue,
    outputHDMIAudioEmbedMode TypeOutputHDMIAudioEmbedMode,
    outputHDMIAudioEmbedModeSwitchPosition TypeOutputHDMIAudioEmbedMode,
    outputHDMIAudioAudioChannelAssignment TypeOutputHDMIAudioAudioChannelAssignment,
    overlayOthersEnable OnOffValue,
    overlayOthersEnableSwitchPosition OnOffValue,
    overlayTimeCodeEnable OnOffValue,
    overlayTimeCodeEnableSwitchPosition OnOffValue,
    overlayClosedCaptionEnable OnOffValue,
    overlayClosedCaptionEnableSwitchPosition OnOffValue,
    overlayLoopBackEnable OnOffValue,
    overlayLoopBackEnableSwitchPosition OnOffValue,
    overlayTimeCodeAutomaticEnable OnOffValue,
    overlayTimeCodeATCLTCEnable OnOffValue,
    overlayTimeCodeATCVITCEnable OnOffValue,
    overlayVideoStandardEnable OnOffValue,
    overlayAudioLevelMeterEnable OnOffValue,
    overlayCenterCrossEnable TypeOverlayCenterCrossEnable,
    overlayAspectRatioMode TypeOverlayAspectRatioMode,
    overlayCurtainTransparency TypeOverlayCurtainTransparency,
    overlaySafeAreaMode TypeOverlaySafeAreaMode,
    overlaySafeAreaFromAspectRatio TypeOverlayCenterCrossEnable,
    overlaySafeAreaColor TypeOverlaySafeAreaColor,
    overlayClosedCaptionServiceNumber TypeOverlayClosedCaptionServiceNumber,
    overlayClosedCaptionBGTransparency TypeOverlayClosedCaptionBGTransparency,
    overlayClosedCaptionStartPosV Integer32,
    overlayCenterCrossMarkerHorEnable TypeOverlayCenterCrossEnable,
    overlayCenterCrossMarkerHorEndPosH Integer32,
    overlayCenterCrossMarkerHorEndPosV Integer32,
    overlayCenterCrossMarkerHorStartPosH Integer32,
    overlayCenterCrossMarkerHorStartPosV Integer32,
    overlayCenterCrossMarkerVertEnable TypeOverlayCenterCrossEnable,
    overlayCenterCrossMarkerVertEndPosH Integer32,
    overlayCenterCrossMarkerVertEndPosV Integer32,
    overlayCenterCrossMarkerVertStartPosH Integer32,
    overlayCenterCrossMarkerVertStartPosV Integer32,
    overlayAspectRatioMarkerLeftEnable TypeOverlayCenterCrossEnable,
    overlayAspectRatioMarkerLeftEndPosH Integer32,
    overlayAspectRatioMarkerLeftEndPosV Integer32,
    overlayAspectRatioMarkerLeftStartPosH Integer32,
    overlayAspectRatioMarkerLeftStartPosV Integer32,
    overlayAspectRatioMarkerRightEnable TypeOverlayCenterCrossEnable,
    overlayAspectRatioMarkerRightEndPosH Integer32,
    overlayAspectRatioMarkerRightEndPosV Integer32,
    overlayAspectRatioMarkerRightStartPosH Integer32,
    overlayAspectRatioMarkerRightStartPosV Integer32,
    overlayCurtainMarkerLeftEnable TypeOverlayCenterCrossEnable,
    overlayCurtainMarkerLeftEndPosH Integer32,
    overlayCurtainMarkerLeftEndPosV Integer32,
    overlayCurtainMarkerLeftStartPosH Integer32,
    overlayCurtainMarkerLeftStartPosV Integer32,
    overlayCurtainMarkerRightEnable TypeOverlayCenterCrossEnable,
    overlayCurtainMarkerRightEndPosH Integer32,
    overlayCurtainMarkerRightEndPosV Integer32,
    overlayCurtainMarkerRightStartPosH Integer32,
    overlayCurtainMarkerRightStartPosV Integer32,
    overlaySafeAreaMarkerTopEnable TypeOverlayCenterCrossEnable,
    overlaySafeAreaMarkerTopEndPosH Integer32,
    overlaySafeAreaMarkerTopEndPosV Integer32,
    overlaySafeAreaMarkerTopStartPosH Integer32,
    overlaySafeAreaMarkerTopStartPosV Integer32,
    overlaySafeAreaMarkerBottomEnable TypeOverlayCenterCrossEnable,
    overlaySafeAreaMarkerBottomEndPosH Integer32,
    overlaySafeAreaMarkerBottomEndPosV Integer32,
    overlaySafeAreaMarkerBottomStartPosH Integer32,
    overlaySafeAreaMarkerBottomStartPosV Integer32,
    overlaySafeAreaMarkerLeftEnable TypeOverlayCenterCrossEnable,
    overlaySafeAreaMarkerLeftEndPosH Integer32,
    overlaySafeAreaMarkerLeftEndPosV Integer32,
    overlaySafeAreaMarkerLeftStartPosH Integer32,
    overlaySafeAreaMarkerLeftStartPosV Integer32,
    overlaySafeAreaMarkerRightEnable TypeOverlayCenterCrossEnable,
    overlaySafeAreaMarkerRightEndPosH Integer32,
    overlaySafeAreaMarkerRightEndPosV Integer32,
    overlaySafeAreaMarkerRightStartPosH Integer32,
    overlaySafeAreaMarkerRightStartPosV Integer32,
    statusText DisplayString,
    eventHDMIOutputSignaloutofrange OnOffValue,
    eventHDMIOutputSignaloutofrangeSNMP TypeEventHDMIOutputSignaloutofrangeSNMP,
    outputHDMISinkTMDSExceeded OnOffValue,
    outputHDMISinkEDIDPart1 DisplayString,
    outputHDMISinkEDIDPart2 DisplayString,
    outputHDMISinkEDID DisplayString,
    outputAudioDownmix51 OnOffValue }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of CDH1411"
    ::= { sw1058 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        locate,
        statusColor,
        statusColorRGB,
        inputSDI1VideoLedPresentColor,
        inputSDI1VideoLedPresentColorRGB,
        inputSDIAudioLedPresentColor,
        inputSDIAudioLedPresentColorRGB,
        inputSDI2OpticalLedRxColor,
        inputSDI2OpticalLedRxColorRGB,
        inputSourceStatus,
        inputSelectMode,
        inputSelectModeSwitchPosition,
        inputSelectManual,
        inputSelectManualSwitchPosition,
        inputSDI1VideoStandard,
        inputSDI1VideoFormat,
        inputSDI2VideoStandard,
        inputSDI2VideoFormat,
        inputSDI2OpticalSFPModulePartNumber,
        inputSDI2OpticalSFPModuleType,
        inputSDI2OpticalBudget,
        inputSDIVideoColorRange,
        inputSDIVideoColorRangeStatus,
        inputSDIVideoColorSpaceStatus,
        inputSDIVideoColorimetryStatus,
        inputSDIVideoEOTFStatus,
        inputSDIAudioGroupPresent01,
        inputSDIAudioGroupPresent02,
        inputSDIAudioGroupPresent03,
        inputSDIAudioGroupPresent04,
        inputSDIAudioGroupPresent05,
        inputSDIAudioGroupPresent06,
        inputSDIAudioGroupPresent07,
        inputSDIAudioGroupPresent08,
        inputSDIAudioGroupPresent09,
        inputSDIAudioGroupPresent10,
        inputSDIAudioGroupPresent11,
        inputSDIAudioGroupPresent12,
        inputSDIAudioGroupPresent13,
        inputSDIAudioGroupPresent14,
        inputSDIAudioGroupPresent15,
        inputSDIAudioGroupPresent16,
        outputAudioSourceAudioOut,
        outputAudioSourceAudioOutSwitchPosition,
        outputAudioSource3GLevelB,
        outputAudioAnalogFSLevel,
        outputAudioAnalogFSLevelSwitchPosition,
        outputAudioAnalogFSLevelUser,
        outputHDMIVideoStandard,
        outputHDMIVideoBitDepth,
        outputHDMIVideoBitDepthStatus,
        outputHDMIVideoColorSpace,
        outputHDMIVideoColorSpaceStatus,
        outputHDMIVideoColorRange,
        outputHDMIVideoColorRangeStatus,
        outputHDMIVideoColorimetry,
        outputHDMIVideoColorimetryStatus,
        outputHDMIVideoEOTF,
        outputHDMIVideoEOTFStatus,
        outputHDMIVideoITContentType,
        outputHDMIVideoHVDelay,
        outputHDMIVideoFlipSignal,
        outputHDMIAudioEmbed,
        outputHDMIAudioEmbedSwitchPosition,
        outputHDMIAudioEmbedMode,
        outputHDMIAudioEmbedModeSwitchPosition,
        outputHDMIAudioAudioChannelAssignment,
        overlayOthersEnable,
        overlayOthersEnableSwitchPosition,
        overlayTimeCodeEnable,
        overlayTimeCodeEnableSwitchPosition,
        overlayClosedCaptionEnable,
        overlayClosedCaptionEnableSwitchPosition,
        overlayLoopBackEnable,
        overlayLoopBackEnableSwitchPosition,
        overlayTimeCodeAutomaticEnable,
        overlayTimeCodeATCLTCEnable,
        overlayTimeCodeATCVITCEnable,
        overlayVideoStandardEnable,
        overlayAudioLevelMeterEnable,
        overlayCenterCrossEnable,
        overlayAspectRatioMode,
        overlayCurtainTransparency,
        overlaySafeAreaMode,
        overlaySafeAreaFromAspectRatio,
        overlaySafeAreaColor,
        overlayClosedCaptionServiceNumber,
        overlayClosedCaptionBGTransparency,
        overlayClosedCaptionStartPosV,
        overlayCenterCrossMarkerHorEnable,
        overlayCenterCrossMarkerHorEndPosH,
        overlayCenterCrossMarkerHorEndPosV,
        overlayCenterCrossMarkerHorStartPosH,
        overlayCenterCrossMarkerHorStartPosV,
        overlayCenterCrossMarkerVertEnable,
        overlayCenterCrossMarkerVertEndPosH,
        overlayCenterCrossMarkerVertEndPosV,
        overlayCenterCrossMarkerVertStartPosH,
        overlayCenterCrossMarkerVertStartPosV,
        overlayAspectRatioMarkerLeftEnable,
        overlayAspectRatioMarkerLeftEndPosH,
        overlayAspectRatioMarkerLeftEndPosV,
        overlayAspectRatioMarkerLeftStartPosH,
        overlayAspectRatioMarkerLeftStartPosV,
        overlayAspectRatioMarkerRightEnable,
        overlayAspectRatioMarkerRightEndPosH,
        overlayAspectRatioMarkerRightEndPosV,
        overlayAspectRatioMarkerRightStartPosH,
        overlayAspectRatioMarkerRightStartPosV,
        overlayCurtainMarkerLeftEnable,
        overlayCurtainMarkerLeftEndPosH,
        overlayCurtainMarkerLeftEndPosV,
        overlayCurtainMarkerLeftStartPosH,
        overlayCurtainMarkerLeftStartPosV,
        overlayCurtainMarkerRightEnable,
        overlayCurtainMarkerRightEndPosH,
        overlayCurtainMarkerRightEndPosV,
        overlayCurtainMarkerRightStartPosH,
        overlayCurtainMarkerRightStartPosV,
        overlaySafeAreaMarkerTopEnable,
        overlaySafeAreaMarkerTopEndPosH,
        overlaySafeAreaMarkerTopEndPosV,
        overlaySafeAreaMarkerTopStartPosH,
        overlaySafeAreaMarkerTopStartPosV,
        overlaySafeAreaMarkerBottomEnable,
        overlaySafeAreaMarkerBottomEndPosH,
        overlaySafeAreaMarkerBottomEndPosV,
        overlaySafeAreaMarkerBottomStartPosH,
        overlaySafeAreaMarkerBottomStartPosV,
        overlaySafeAreaMarkerLeftEnable,
        overlaySafeAreaMarkerLeftEndPosH,
        overlaySafeAreaMarkerLeftEndPosV,
        overlaySafeAreaMarkerLeftStartPosH,
        overlaySafeAreaMarkerLeftStartPosV,
        overlaySafeAreaMarkerRightEnable,
        overlaySafeAreaMarkerRightEndPosH,
        overlaySafeAreaMarkerRightEndPosV,
        overlaySafeAreaMarkerRightStartPosH,
        overlaySafeAreaMarkerRightStartPosV,
        statusText,
        eventHDMIOutputSignaloutofrange,
        eventHDMIOutputSignaloutofrangeSNMP,
        outputHDMISinkTMDSExceeded,
        outputHDMISinkEDIDPart1,
        outputHDMISinkEDIDPart2,
        outputHDMISinkEDID,
        outputAudioDownmix51 }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END