-- Machine generated MIB file, do not edit!
--
-- MIB file for CDH1813-1, type code 42.17, software label 590
-- Generated on Friday, 19-Feb-21 16:06:36 UTC
-- CVS $Id: CDH1813-1_4217_sw590.mib,v 1.3 2021/02/19 16:06:36 til Exp $
--
-- Copyright 2003-2021 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

CDH1813-1-4217-sw590-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

cdh1813-1-4217-sw590 MODULE-IDENTITY
    LAST-UPDATED "202102191606Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for CDH1813-1, type code 42.17, software label 590"
    REVISION "202102191606Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 16919590 }

cdh1813-1-4217 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type CDH1813-1"
    ::= { products 16919 }

sw590 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 590"
    ::= { cdh1813-1-4217 590 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        red(1),
        green(2),
        yellow(3)
    }

TypeStatusColorRGB ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n000000(0),
        ff0000(1),
        n00ff00(2),
        ffff00(3)
    }

TypeSDIInputStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27),
        n2KP60(28),
        n2KP59(29),
        n2KP50(30),
        n2KP48(31),
        n2KP47(32),
        n2KP30(33),
        n2KP29(34),
        n2KP25(35),
        n2KP24(36),
        n2KP23(37),
        n2KPsF30(38),
        n2KPsF29(39),
        n2KPsF25(40),
        n2KPsF24(41),
        n2KPsF23(42)
    }

TypeSDIColorSpaceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n422(0),
        n444(1)
    }

TypeEmbGroup1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        present(0),
        notEmbedded(1)
    }

TypeSourceAudioOut ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        ch12(0),
        ch34(1),
        ch56(2),
        ch78(3),
        ch910(4),
        ch1112(5),
        ch1314(6),
        ch1516(7)
    }

TypeFSLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        mute(0),
        line(1),
        n12DBu(2),
        n15DBu(3),
        n18DBu(4),
        n20DBu(5),
        n22DBu(6),
        n24DBu(7)
    }

TypeHDMIAudioEmbedMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        selectedChannel(0),
        channels18916(1)
    }

TypeHDCPStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        error(0),
        ok(1),
        connecting(2)
    }

TypeHDMIITContentType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        photo(0),
        graphics(1),
        cinema(2),
        game(3),
        none(4)
    }

TypeSDIInputColorRange ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        limited(0),
        full(1)
    }

TypeStereoscopicHDMI3DFormat ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        framePackingFP(1),
        sideBySideSS(2),
        topAndBottomTB(3)
    }

TypeStereoscopicHDMI3DFormatStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        no3D(0),
        framePackingFP(1),
        sideBySideSS(2),
        topAndBottomTB(3)
    }

TypeStereoscopicSDI3DFormat ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        sideBySideSS(1),
        topAndBottomTB(2),
        dualStream3GLevelB(3),
        no3D(4)
    }

TypeStereoscopicSDI3DFormatStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        sideBySideSS(0),
        topAndBottomTB(1),
        dualStream3GLevelB(2),
        no3D(3)
    }

TypeStereoscopicFlipLeftEye ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        noFlip(0),
        h(1),
        v(2),
        hV(3)
    }

TypeStereoscopicSDIStreamSwap ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        regular(0),
        inverted(1)
    }

TypeSafeAreaCenterCross ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeSafeAreaARM ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        n43(1),
        n169(2)
    }

TypeSafeAreaCurtainTransparency ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n100(0),
        n90(1),
        n80(2),
        n70(3),
        n60(4),
        n50(5),
        n40(6),
        n30(7)
    }

TypeSafeAreaSafeAreaMarkers ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        sMPTESafeAction9090(1),
        sMPTESafeTitle8080(2),
        eBUAction3535(3),
        eBUGraphics510(4)
    }

TypeSafeAreaMarkerColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        white(0),
        yellow(1),
        cyan(2),
        green(3),
        magenta(4),
        red(5),
        blue(6),
        black(7)
    }

TypeHDMIBitDepthStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n8Bit(0),
        n10Bit(1),
        n12Bit(2)
    }

TypeHDMIColorSpaceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        rgb(0),
        yCbCr422(1),
        yCbCr444(2)
    }

TypeHDMIBitDepth ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        n8Bit(1),
        n10Bit(2),
        n12Bit(3)
    }

TypeHDMIColorSpace ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        rgb(1),
        yCbCr422(2),
        yCbCr444(3)
    }

TypeHDMIColorRange ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        default(0),
        limited(1),
        full(2)
    }

TypeAudioChannelAssignment ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n11(0),
        convert(1)
    }

TypeOutputMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        dvi(0),
        hdmi(1)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 8 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 9 }

statusColorRGB OBJECT-TYPE
    SYNTAX TypeStatusColorRGB
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 10 }

sDIInputStandard OBJECT-TYPE
    SYNTAX TypeSDIInputStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of SDI input"
    ::= { paramEntry 12 }

sDIColorSpaceStatus OBJECT-TYPE
    SYNTAX TypeSDIColorSpaceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows Colorspace of SDI input"
    ::= { paramEntry 13 }

embGroup1 OBJECT-TYPE
    SYNTAX TypeEmbGroup1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1"
    ::= { paramEntry 14 }

embGroup2 OBJECT-TYPE
    SYNTAX TypeEmbGroup1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2"
    ::= { paramEntry 15 }

embGroup3 OBJECT-TYPE
    SYNTAX TypeEmbGroup1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3"
    ::= { paramEntry 16 }

embGroup4 OBJECT-TYPE
    SYNTAX TypeEmbGroup1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4"
    ::= { paramEntry 17 }

sourceAudioOut OBJECT-TYPE
    SYNTAX TypeSourceAudioOut
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for audio output"
    ::= { paramEntry 18 }

fSLevel OBJECT-TYPE
    SYNTAX TypeFSLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Full-Scale level for analog audio output"
    ::= { paramEntry 19 }

hDMIAudioEmbed OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable audio embedding for HDMI output"
    ::= { paramEntry 20 }

hDMIAudioEmbedMode OBJECT-TYPE
    SYNTAX TypeHDMIAudioEmbedMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embeds channels 1-8/9-16 or selected audio channel for HDMI output"
    ::= { paramEntry 21 }

displayTimeCode OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Shows Time Code on the display"
    ::= { paramEntry 22 }

displayMetaData OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Shows Meta Data on the display"
    ::= { paramEntry 23 }

safeAreaBurnin OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable burn-in overlay of Safe Area Markers.<br>The exact markers and their position can be specified with various other switches."
    ::= { paramEntry 24 }

hVDelay OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Shift the active image content in H and/or V direction<br>so that the H/V interval becomes visible in the center of the display. Details can be configured with switch <i>H/V Delay Selection</i>."
    ::= { paramEntry 25 }

hDCPEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable HDCP protection on the HDMI output signal (default: OFF).<br>If modified to ON, then the signal can only be delivered if the receiving HDMI device accepts HDCP protected content. Otherwise, the HDCP Status parameter will indicate ERROR, and no signal will be delivered."
    ::= { paramEntry 26 }

hDCPStatus OBJECT-TYPE
    SYNTAX TypeHDCPStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of the HDCP protected output signal.<br>An ERROR status indicates that the HDMI receiver device does not accept HDCP protected content. Only applicable if the HDCP Enable setting is ON."
    ::= { paramEntry 27 }

hDMIITContentType OBJECT-TYPE
    SYNTAX TypeHDMIITContentType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the IT Content Type for the HDMI output signal according to CEA-861-E."
    ::= { paramEntry 28 }

centerCut2K OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Center cut for some large video formats"
    ::= { paramEntry 39 }

fiberInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable or disable the fiber input"
    ::= { paramEntry 40 }

hDMIOutputStandard OBJECT-TYPE
    SYNTAX TypeSDIInputStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of HDMI output"
    ::= { paramEntry 41 }

sourceAudioOutSwitchPosition OBJECT-TYPE
    SYNTAX TypeSourceAudioOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Source for audio output"
    ::= { paramEntry 42 }

fSLevelSwitchPosition OBJECT-TYPE
    SYNTAX TypeFSLevel
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-Scale level for analog audio output"
    ::= { paramEntry 43 }

hDMIAudioEmbedSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable audio embedding for HDMI output (Switch Position)"
    ::= { paramEntry 44 }

hDMIAudioEmbedModeSwitchPosition OBJECT-TYPE
    SYNTAX TypeHDMIAudioEmbedMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Embeds channels 1-8/9-16 or selected audio channel for HDMI output (Switch Position)"
    ::= { paramEntry 45 }

displayTimeCodeSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows Time Code on the display (Switch Position)"
    ::= { paramEntry 46 }

displayMetaDataSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows Meta Data on the display (Switch Position)"
    ::= { paramEntry 47 }

centerCut2KSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Center cut for some large video formats (Switch Position)"
    ::= { paramEntry 48 }

fiberInputSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable or disable the fiber input (Switch Position)"
    ::= { paramEntry 49 }

sDIInputColorRange OBJECT-TYPE
    SYNTAX TypeSDIInputColorRange
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select color range on SDI input"
    ::= { paramEntry 50 }

sFPModulePartNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of used SFP Module"
    ::= { paramEntry 51 }

sFPModuleType OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "displays the type of detected SFP-Module . The SFP part number will also be  displayed if SFP-Module is unknown."
    ::= { paramEntry 52 }

hVDelaySwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shift the active image content in H and/or V direction<br>so that the H/V interval becomes visible in the center of the display. Details can be configured with switch <i>H/V Delay Selection</i>."
    ::= { paramEntry 53 }

safeAreaBurninSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable burn-in overlay of Safe Area Markers.<br>The exact markers and their position can be specified with various other switches."
    ::= { paramEntry 54 }

stereoscopicHDMI3DFormat OBJECT-TYPE
    SYNTAX TypeStereoscopicHDMI3DFormat
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set HDMI 3D output format<br> in which 3D content shall be sent over HDMI, if applicable. By default (automatic), the format is derived from the 3D format of the SDI input signal (see parameter <i>SDI 3D Input format</i>). The result of the automatic decision can be seen in the current value of parameter <i>HDMI 3D Output Format Status</i>."
    ::= { paramEntry 55 }

stereoscopicHDMI3DFormatStatus OBJECT-TYPE
    SYNTAX TypeStereoscopicHDMI3DFormatStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "3D status of the generated HDMI signal.<br>It is either <i>no 3D</i> for non-stereoscopic contents. Or it shows the exact mode in which the LE/RE information is being encoded. See parameter <i>HDMI 3D Output Format</i>."
    ::= { paramEntry 56 }

stereoscopicSDI3DFormat OBJECT-TYPE
    SYNTAX TypeStereoscopicSDI3DFormat
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set 3D format of the incoming SDI stream.<br>By default (automatic), the format is derived from the contained VPID (SMPTE 452-2:2012). If no such VPID can be detected, the SDI input will (by default) be processed as regular 2D content. Also see switch <i>Select Stream</i>."
    ::= { paramEntry 57 }

stereoscopicSDI3DFormatStatus OBJECT-TYPE
    SYNTAX TypeStereoscopicSDI3DFormatStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "3D status of SDI input signal<br> as set by switch <i>SDI 3D Input Format</i>, resp. as derived from a contained VPID marker."
    ::= { paramEntry 58 }

stereoscopicFlipLeftEye OBJECT-TYPE
    SYNTAX TypeStereoscopicFlipLeftEye
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Flip/mirror the picture content in H and/or V direction.<br>For 3D signals, this applies to the left-eye signal. For 2D signals, this switch has no function."
    ::= { paramEntry 59 }

stereoscopicFlipRightEye OBJECT-TYPE
    SYNTAX TypeStereoscopicFlipLeftEye
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Flip/mirror the picture content in H and/or V direction.<br>For 3D signals, this applies to the right-eye signal."
    ::= { paramEntry 60 }

stereoscopicSDIStreamSwap OBJECT-TYPE
    SYNTAX TypeStereoscopicSDIStreamSwap
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Swap Video Streams.<br>When a 3G/LevelB input signal is processed as 3D content, then the Left-Eye signal will be taken from Stream A while the Right-Eye signal is taken from Stream B. This default selection can be inverted with this switch. When a 3G/LevelB input signal is processed as 2D content, only one stream can processed. By default this is stream A. This switch will select Stream B instead. This switch has no function if the SDI input is NOT a 3G/LevelB stream."
    ::= { paramEntry 61 }

flipSignal OBJECT-TYPE
    SYNTAX TypeStereoscopicFlipLeftEye
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Flip/mirror the picture content in H and/or V direction."
    ::= { paramEntry 62 }

safeAreaCenterCross OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert a cross marker in the center of the active image<br> as defined by EBU R95-2008.<br>NOTE that these markers are shown only if the <i>Safe Area Marker</i> DIP switch (on the yellobrik case) is set to ON."
    ::= { paramEntry 63 }

safeAreaARM OBJECT-TYPE
    SYNTAX TypeSafeAreaARM
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert two lines to mark the border of the selected aspect ratio content<br> as defined by SMPTE RP218-2002 / EBU R95-2008. The areas outside of these markers can be reduced in transparency: see parameter <i>Curtain Transparency</i>. NOTE that these markers are shown only if the <i>Safe Area Marker</i> DIP switch (on the yellobrik case) is set to ON."
    ::= { paramEntry 64 }

safeAreaCurtainTransparency OBJECT-TYPE
    SYNTAX TypeSafeAreaCurtainTransparency
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Define level of transparency<br> for the areas outside of the <i>Aspect Ratio Markers</i> (as enabled by switch <i>Aspect Ratio Marker</i>). By default, those areas are shown unmodified (100% transparency). This switch allows for a reduction of luminance in these <i>out-of-bounds</i> areas."
    ::= { paramEntry 65 }

safeAreaSafeAreaMarkers OBJECT-TYPE
    SYNTAX TypeSafeAreaSafeAreaMarkers
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Define the position of the safe area markers overlay.<br>The choice is between various positions as defined in SMPTE RP218-2002 as well as those define in EBU R95-2008. NOTE that these markers are shown only if the <i>Safe Area Marker</i> DIP switch (on the yellobrik case) is set to ON."
    ::= { paramEntry 66 }

safeAreaSAMfromARM OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set relation of Safe Area Marker Lines.<br>By default, the safe area marker lines (as specified by switch <i>Safe Area Marker</i>) are shown relative to the <i>Aspect Ratio Marker</i> (if enabled). This switch can specify that the <i>Safe Area Marker</i> lines shall be placed relative to the outline of the active picture, independent of the position of the <i>Aspect Ratio Marker</i>."
    ::= { paramEntry 67 }

safeAreaMarkerColor OBJECT-TYPE
    SYNTAX TypeSafeAreaMarkerColor
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Safe Area Marker Color.<br>By default, all Safe Area Marker Overlays are generated in white color. This color can be customized here."
    ::= { paramEntry 68 }

enableRectangle1 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle1"
    ::= { paramEntry 69 }

enableRectangle2 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle2"
    ::= { paramEntry 70 }

enableRectangle3 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle3"
    ::= { paramEntry 71 }

enableRectangle4 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle4"
    ::= { paramEntry 72 }

enableRectangle5 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle5"
    ::= { paramEntry 73 }

enableRectangle6 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle6"
    ::= { paramEntry 74 }

enableRectangle7 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle7"
    ::= { paramEntry 75 }

enableRectangle8 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle8"
    ::= { paramEntry 76 }

enableRectangle9 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle9"
    ::= { paramEntry 77 }

enableRectangle10 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle10"
    ::= { paramEntry 78 }

markersCenterCrossHorStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossHor/StartPosH"
    ::= { paramEntry 79 }

markersCenterCrossVertStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossVert/StartPosH"
    ::= { paramEntry 80 }

markersAspectMarkerLeftUpStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerLeft-Up/StartPosH"
    ::= { paramEntry 81 }

markersAspectMarkerRightDownStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerRight-Down/StartPosH"
    ::= { paramEntry 82 }

markersCurtainLeftUpStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainLeft-Up/StartPosH"
    ::= { paramEntry 83 }

markersCurtainRightDownStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainRight-Down/StartPosH"
    ::= { paramEntry 84 }

markersSAMLeftStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMLeft/StartPosH"
    ::= { paramEntry 85 }

markersSAMRightStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMRight/StartPosH"
    ::= { paramEntry 86 }

markersSAMUpStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMUp/StartPosH"
    ::= { paramEntry 87 }

markersSAMDownStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMDown/StartPosH"
    ::= { paramEntry 88 }

markersCenterCrossHorStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossHor/StartPosV"
    ::= { paramEntry 89 }

markersCenterCrossVertStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossVert/StartPosV"
    ::= { paramEntry 90 }

markersAspectMarkerLeftUpStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerLeft-Up/StartPosV"
    ::= { paramEntry 91 }

markersAspectMarkerRightDownStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerRight-Down/StartPosV"
    ::= { paramEntry 92 }

markersCurtainLeftUpStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainLeft-Up/StartPosV"
    ::= { paramEntry 93 }

markersCurtainRightDownStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainRight-Down/StartPosV"
    ::= { paramEntry 94 }

markersSAMLeftStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMLeft/StartPosV"
    ::= { paramEntry 95 }

markersSAMRightStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMRight/StartPosV"
    ::= { paramEntry 96 }

markersSAMUpStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMUp/StartPosV"
    ::= { paramEntry 97 }

markersSAMDownStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMDown/StartPosV"
    ::= { paramEntry 98 }

markersCenterCrossHorEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossHor/EndPosH"
    ::= { paramEntry 99 }

markersCenterCrossVertEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossVert/EndPosH"
    ::= { paramEntry 100 }

markersAspectMarkerLeftUpEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerLeft-Up/EndPosH"
    ::= { paramEntry 101 }

markersAspectMarkerRightDownEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerRight-Down/EndPosH"
    ::= { paramEntry 102 }

markersCurtainLeftUpEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainLeft-Up/EndPosH"
    ::= { paramEntry 103 }

markersCurtainRightDownEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainRight-Down/EndPosH"
    ::= { paramEntry 104 }

markersSAMLeftEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMLeft/EndPosH"
    ::= { paramEntry 105 }

markersSAMRightEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMRight/EndPosH"
    ::= { paramEntry 106 }

markersSAMUpEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMUp/EndPosH"
    ::= { paramEntry 107 }

markersSAMDownEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMDown/EndPosH"
    ::= { paramEntry 108 }

markersCenterCrossHorEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossHor/EndPosV"
    ::= { paramEntry 109 }

markersCenterCrossVertEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossVert/EndPosV"
    ::= { paramEntry 110 }

markersAspectMarkerLeftUpEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerLeft-Up/EndPosV"
    ::= { paramEntry 111 }

markersAspectMarkerRightDownEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerRight-Down/EndPosV"
    ::= { paramEntry 112 }

markersCurtainLeftUpEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainLeft-Up/EndPosV"
    ::= { paramEntry 113 }

markersCurtainRightDownEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainRight-Down/EndPosV"
    ::= { paramEntry 114 }

markersSAMLeftEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMLeft/EndPosV"
    ::= { paramEntry 115 }

markersSAMRightEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMRight/EndPosV"
    ::= { paramEntry 116 }

markersSAMUpEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMUp/EndPosV"
    ::= { paramEntry 117 }

markersSAMDownEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMDown/EndPosV"
    ::= { paramEntry 118 }

hDMIBitDepthStatus OBJECT-TYPE
    SYNTAX TypeHDMIBitDepthStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the used HDMI Bit depth"
    ::= { paramEntry 119 }

hDMIColorSpaceStatus OBJECT-TYPE
    SYNTAX TypeHDMIColorSpaceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the used HDMI Colorspace"
    ::= { paramEntry 120 }

hDMIBitDepth OBJECT-TYPE
    SYNTAX TypeHDMIBitDepth
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set bit depth for HDMI output.<br>Per default (auto), the bit depth will be selected based on the EDID information provided by the HDMI destination."
    ::= { paramEntry 121 }

hDMIColorSpace OBJECT-TYPE
    SYNTAX TypeHDMIColorSpace
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select color space for HDMI output.<br>Per default (auto), the color space will be selected based on the EDID information provided by the HDMI destination."
    ::= { paramEntry 122 }

hDMIColorRange OBJECT-TYPE
    SYNTAX TypeHDMIColorRange
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select color range for HDMI output.<br>Per default, the color range will be selected based on the EDID information provided by the HDMI destination."
    ::= { paramEntry 123 }

audioChannelAssignment OBJECT-TYPE
    SYNTAX TypeAudioChannelAssignment
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Switch between different allocations of audio channels.<br>By default, all audio channels (1 through 8) are mapped <b>1:1</b> between SDI and HDMI.  If set to <b>convert</b>, channels 3 and 4 are swapped against each other, resulting in a conversion between the allocation according to SMPTE320M (3=Center /4=LFE) and CEA-861 (3=LFE / 4=FrontCenter)."
    ::= { paramEntry 126 }

outputMode OBJECT-TYPE
    SYNTAX TypeOutputMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the used output mode"
    ::= { paramEntry 127 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of CDH1813-1 parameters"
    ::= { sw590 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of CDH1813-1 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    locate OnOffValue,
    statusColor TypeStatusColor,
    statusColorRGB TypeStatusColorRGB,
    sDIInputStandard TypeSDIInputStandard,
    sDIColorSpaceStatus TypeSDIColorSpaceStatus,
    embGroup1 TypeEmbGroup1,
    embGroup2 TypeEmbGroup1,
    embGroup3 TypeEmbGroup1,
    embGroup4 TypeEmbGroup1,
    sourceAudioOut TypeSourceAudioOut,
    fSLevel TypeFSLevel,
    hDMIAudioEmbed OnOffValue,
    hDMIAudioEmbedMode TypeHDMIAudioEmbedMode,
    displayTimeCode OnOffValue,
    displayMetaData OnOffValue,
    safeAreaBurnin OnOffValue,
    hVDelay OnOffValue,
    hDCPEnable OnOffValue,
    hDCPStatus TypeHDCPStatus,
    hDMIITContentType TypeHDMIITContentType,
    centerCut2K OnOffValue,
    fiberInput OnOffValue,
    hDMIOutputStandard TypeSDIInputStandard,
    sourceAudioOutSwitchPosition TypeSourceAudioOut,
    fSLevelSwitchPosition TypeFSLevel,
    hDMIAudioEmbedSwitchPosition OnOffValue,
    hDMIAudioEmbedModeSwitchPosition TypeHDMIAudioEmbedMode,
    displayTimeCodeSwitchPosition OnOffValue,
    displayMetaDataSwitchPosition OnOffValue,
    centerCut2KSwitchPosition OnOffValue,
    fiberInputSwitchPosition OnOffValue,
    sDIInputColorRange TypeSDIInputColorRange,
    sFPModulePartNumber DisplayString,
    sFPModuleType DisplayString,
    hVDelaySwitchPosition OnOffValue,
    safeAreaBurninSwitchPosition OnOffValue,
    stereoscopicHDMI3DFormat TypeStereoscopicHDMI3DFormat,
    stereoscopicHDMI3DFormatStatus TypeStereoscopicHDMI3DFormatStatus,
    stereoscopicSDI3DFormat TypeStereoscopicSDI3DFormat,
    stereoscopicSDI3DFormatStatus TypeStereoscopicSDI3DFormatStatus,
    stereoscopicFlipLeftEye TypeStereoscopicFlipLeftEye,
    stereoscopicFlipRightEye TypeStereoscopicFlipLeftEye,
    stereoscopicSDIStreamSwap TypeStereoscopicSDIStreamSwap,
    flipSignal TypeStereoscopicFlipLeftEye,
    safeAreaCenterCross TypeSafeAreaCenterCross,
    safeAreaARM TypeSafeAreaARM,
    safeAreaCurtainTransparency TypeSafeAreaCurtainTransparency,
    safeAreaSafeAreaMarkers TypeSafeAreaSafeAreaMarkers,
    safeAreaSAMfromARM TypeSafeAreaCenterCross,
    safeAreaMarkerColor TypeSafeAreaMarkerColor,
    enableRectangle1 TypeSafeAreaCenterCross,
    enableRectangle2 TypeSafeAreaCenterCross,
    enableRectangle3 TypeSafeAreaCenterCross,
    enableRectangle4 TypeSafeAreaCenterCross,
    enableRectangle5 TypeSafeAreaCenterCross,
    enableRectangle6 TypeSafeAreaCenterCross,
    enableRectangle7 TypeSafeAreaCenterCross,
    enableRectangle8 TypeSafeAreaCenterCross,
    enableRectangle9 TypeSafeAreaCenterCross,
    enableRectangle10 TypeSafeAreaCenterCross,
    markersCenterCrossHorStartPosH Integer32,
    markersCenterCrossVertStartPosH Integer32,
    markersAspectMarkerLeftUpStartPosH Integer32,
    markersAspectMarkerRightDownStartPosH Integer32,
    markersCurtainLeftUpStartPosH Integer32,
    markersCurtainRightDownStartPosH Integer32,
    markersSAMLeftStartPosH Integer32,
    markersSAMRightStartPosH Integer32,
    markersSAMUpStartPosH Integer32,
    markersSAMDownStartPosH Integer32,
    markersCenterCrossHorStartPosV Integer32,
    markersCenterCrossVertStartPosV Integer32,
    markersAspectMarkerLeftUpStartPosV Integer32,
    markersAspectMarkerRightDownStartPosV Integer32,
    markersCurtainLeftUpStartPosV Integer32,
    markersCurtainRightDownStartPosV Integer32,
    markersSAMLeftStartPosV Integer32,
    markersSAMRightStartPosV Integer32,
    markersSAMUpStartPosV Integer32,
    markersSAMDownStartPosV Integer32,
    markersCenterCrossHorEndPosH Integer32,
    markersCenterCrossVertEndPosH Integer32,
    markersAspectMarkerLeftUpEndPosH Integer32,
    markersAspectMarkerRightDownEndPosH Integer32,
    markersCurtainLeftUpEndPosH Integer32,
    markersCurtainRightDownEndPosH Integer32,
    markersSAMLeftEndPosH Integer32,
    markersSAMRightEndPosH Integer32,
    markersSAMUpEndPosH Integer32,
    markersSAMDownEndPosH Integer32,
    markersCenterCrossHorEndPosV Integer32,
    markersCenterCrossVertEndPosV Integer32,
    markersAspectMarkerLeftUpEndPosV Integer32,
    markersAspectMarkerRightDownEndPosV Integer32,
    markersCurtainLeftUpEndPosV Integer32,
    markersCurtainRightDownEndPosV Integer32,
    markersSAMLeftEndPosV Integer32,
    markersSAMRightEndPosV Integer32,
    markersSAMUpEndPosV Integer32,
    markersSAMDownEndPosV Integer32,
    hDMIBitDepthStatus TypeHDMIBitDepthStatus,
    hDMIColorSpaceStatus TypeHDMIColorSpaceStatus,
    hDMIBitDepth TypeHDMIBitDepth,
    hDMIColorSpace TypeHDMIColorSpace,
    hDMIColorRange TypeHDMIColorRange,
    audioChannelAssignment TypeAudioChannelAssignment,
    outputMode TypeOutputMode }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of CDH1813-1"
    ::= { sw590 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        locate,
        statusColor,
        statusColorRGB,
        sDIInputStandard,
        sDIColorSpaceStatus,
        embGroup1,
        embGroup2,
        embGroup3,
        embGroup4,
        sourceAudioOut,
        fSLevel,
        hDMIAudioEmbed,
        hDMIAudioEmbedMode,
        displayTimeCode,
        displayMetaData,
        safeAreaBurnin,
        hVDelay,
        hDCPEnable,
        hDCPStatus,
        hDMIITContentType,
        centerCut2K,
        fiberInput,
        hDMIOutputStandard,
        sourceAudioOutSwitchPosition,
        fSLevelSwitchPosition,
        hDMIAudioEmbedSwitchPosition,
        hDMIAudioEmbedModeSwitchPosition,
        displayTimeCodeSwitchPosition,
        displayMetaDataSwitchPosition,
        centerCut2KSwitchPosition,
        fiberInputSwitchPosition,
        sDIInputColorRange,
        sFPModulePartNumber,
        sFPModuleType,
        hVDelaySwitchPosition,
        safeAreaBurninSwitchPosition,
        stereoscopicHDMI3DFormat,
        stereoscopicHDMI3DFormatStatus,
        stereoscopicSDI3DFormat,
        stereoscopicSDI3DFormatStatus,
        stereoscopicFlipLeftEye,
        stereoscopicFlipRightEye,
        stereoscopicSDIStreamSwap,
        flipSignal,
        safeAreaCenterCross,
        safeAreaARM,
        safeAreaCurtainTransparency,
        safeAreaSafeAreaMarkers,
        safeAreaSAMfromARM,
        safeAreaMarkerColor,
        enableRectangle1,
        enableRectangle2,
        enableRectangle3,
        enableRectangle4,
        enableRectangle5,
        enableRectangle6,
        enableRectangle7,
        enableRectangle8,
        enableRectangle9,
        enableRectangle10,
        markersCenterCrossHorStartPosH,
        markersCenterCrossVertStartPosH,
        markersAspectMarkerLeftUpStartPosH,
        markersAspectMarkerRightDownStartPosH,
        markersCurtainLeftUpStartPosH,
        markersCurtainRightDownStartPosH,
        markersSAMLeftStartPosH,
        markersSAMRightStartPosH,
        markersSAMUpStartPosH,
        markersSAMDownStartPosH,
        markersCenterCrossHorStartPosV,
        markersCenterCrossVertStartPosV,
        markersAspectMarkerLeftUpStartPosV,
        markersAspectMarkerRightDownStartPosV,
        markersCurtainLeftUpStartPosV,
        markersCurtainRightDownStartPosV,
        markersSAMLeftStartPosV,
        markersSAMRightStartPosV,
        markersSAMUpStartPosV,
        markersSAMDownStartPosV,
        markersCenterCrossHorEndPosH,
        markersCenterCrossVertEndPosH,
        markersAspectMarkerLeftUpEndPosH,
        markersAspectMarkerRightDownEndPosH,
        markersCurtainLeftUpEndPosH,
        markersCurtainRightDownEndPosH,
        markersSAMLeftEndPosH,
        markersSAMRightEndPosH,
        markersSAMUpEndPosH,
        markersSAMDownEndPosH,
        markersCenterCrossHorEndPosV,
        markersCenterCrossVertEndPosV,
        markersAspectMarkerLeftUpEndPosV,
        markersAspectMarkerRightDownEndPosV,
        markersCurtainLeftUpEndPosV,
        markersCurtainRightDownEndPosV,
        markersSAMLeftEndPosV,
        markersSAMRightEndPosV,
        markersSAMUpEndPosV,
        markersSAMDownEndPosV,
        hDMIBitDepthStatus,
        hDMIColorSpaceStatus,
        hDMIBitDepth,
        hDMIColorSpace,
        hDMIColorRange,
        audioChannelAssignment,
        outputMode }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END