-- Machine generated MIB file, do not edit!
--
-- MIB file for CDH1813, type code 42.14, software label 944
-- Generated on Friday, 19-Feb-21 16:03:04 UTC
-- CVS $Id: CDH1813_4214_sw944.mib,v 1.3 2021/02/19 16:03:04 til Exp $
--
-- Copyright 2003-2021 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

CDH1813-4214-sw944-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

cdh1813-4214-sw944 MODULE-IDENTITY
    LAST-UPDATED "202102191603Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for CDH1813, type code 42.14, software label 944"
    REVISION "202102191603Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 16916944 }

cdh1813-4214 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type CDH1813"
    ::= { products 16916 }

sw944 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 944"
    ::= { cdh1813-4214 944 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        red(1),
        green(2),
        yellow(3)
    }

TypeStatusColorRGB ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n000000(0),
        ff0000(1),
        n00ff00(2),
        ffff00(3)
    }

TypeSDIInputStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27),
        n2KP60(28),
        n2KP59(29),
        n2KP50(30),
        n2KP48(31),
        n2KP47(32),
        n2KP30(33),
        n2KP29(34),
        n2KP25(35),
        n2KP24(36),
        n2KP23(37),
        n2KPsF30(38),
        n2KPsF29(39),
        n2KPsF25(40),
        n2KPsF24(41),
        n2KPsF23(42)
    }

TypeSDIColorSpaceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n422(0),
        n444(1)
    }

TypeEmbGroup1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        present(0),
        notEmbedded(1)
    }

TypeSourceAudioOut ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        ch12(0),
        ch34(1),
        ch56(2),
        ch78(3),
        ch910(4),
        ch1112(5),
        ch1314(6),
        ch1516(7)
    }

TypeFSLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        mute(0),
        line(1),
        n12DBu(2),
        n15DBu(3),
        n18DBu(4),
        n20DBu(5),
        n22DBu(6),
        n24DBu(7)
    }

TypeHDMIAudioEmbedMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        selectedChannel(0),
        channels18916(1)
    }

TypeHDMIITContentType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        photo(0),
        graphics(1),
        cinema(2),
        game(3),
        none(4)
    }

TypeSDIInputColorRangeStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        limited(0),
        full(1)
    }

TypeSDIInputColorimetryStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        bT709(0),
        vANCNotSupported(1),
        bT2020(2),
        unknown(3),
        bT601(4)
    }

TypeSDIInputEOTFStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        sdr(0),
        hlg(1),
        pq(2),
        unspecified(3)
    }

TypeSDIIn3GFormat ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        no3G(0),
        levelA(1),
        levelBDualLink(2),
        levelBDualStream(3)
    }

TypeAudioSource3GLevelB ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        streamA(0),
        streamB(1)
    }

TypeAudioSourceStatus3GLevelB ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        streamA(0),
        streamB(1),
        nA(2)
    }

TypeSDIInputColorRange ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        limited(1),
        full(2)
    }

TypeStereoscopicHDMI3DFormat ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        framePackingFP(1),
        sideBySideSS(2),
        topAndBottomTB(3)
    }

TypeStereoscopicHDMI3DFormatStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        no3D(0),
        framePackingFP(1),
        sideBySideSS(2),
        topAndBottomTB(3)
    }

TypeStereoscopicSDI3DFormat ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        sideBySideSS(1),
        topAndBottomTB(2),
        dualStream3GLevelB(3),
        no3D(4)
    }

TypeStereoscopicSDI3DFormatStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        sideBySideSS(0),
        topAndBottomTB(1),
        dualStream3GLevelB(2),
        no3D(3)
    }

TypeStereoscopicFlipLeftEye ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        noFlip(0),
        h(1),
        v(2),
        hV(3)
    }

TypeStereoscopicSDIStreamSwap ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        regular(0),
        inverted(1)
    }

TypeSafeAreaCenterCross ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeSafeAreaARM ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        n43(1),
        n169(2)
    }

TypeSafeAreaCurtainTransparency ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n100(0),
        n90(1),
        n80(2),
        n70(3),
        n60(4),
        n50(5),
        n40(6),
        n30(7)
    }

TypeSafeAreaSafeAreaMarkers ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        sMPTESafeAction9090(1),
        sMPTESafeTitle8080(2),
        eBUAction3535(3),
        eBUGraphics510(4)
    }

TypeSafeAreaMarkerColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        white(0),
        yellow(1),
        cyan(2),
        green(3),
        magenta(4),
        red(5),
        blue(6),
        black(7)
    }

TypeHDMIBitDepthStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n8Bit(0),
        n10Bit(1),
        n12Bit(2)
    }

TypeHDMIColorSpaceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        rgb(0),
        yCbCr422(1),
        yCbCr444(2)
    }

TypeHDMIBitDepth ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        n8Bit(1),
        n10Bit(2),
        n12Bit(3)
    }

TypeHDMIColorSpace ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        rgb(1),
        yCbCr422(2),
        yCbCr444(3)
    }

TypeHDMIColorRange ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        default(0),
        limited(1),
        full(2)
    }

TypeHDMIColorimetry ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        bT601(1),
        bT709(2),
        bT2020(3)
    }

TypeHDMIEOTF ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        gammaSDR(1),
        gammaHDR(2),
        sT2084PQ(3),
        hlg(4)
    }

TypeAudioChannelAssignment ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n11(0),
        convert(1)
    }

TypeOutputMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        dvi(0),
        hdmi(1)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 8 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 9 }

statusColorRGB OBJECT-TYPE
    SYNTAX TypeStatusColorRGB
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 10 }

sDIInputStandard OBJECT-TYPE
    SYNTAX TypeSDIInputStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of SDI input"
    ::= { paramEntry 12 }

sDIColorSpaceStatus OBJECT-TYPE
    SYNTAX TypeSDIColorSpaceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows Colorspace of SDI input"
    ::= { paramEntry 13 }

embGroup1 OBJECT-TYPE
    SYNTAX TypeEmbGroup1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1"
    ::= { paramEntry 14 }

embGroup2 OBJECT-TYPE
    SYNTAX TypeEmbGroup1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2"
    ::= { paramEntry 15 }

embGroup3 OBJECT-TYPE
    SYNTAX TypeEmbGroup1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3"
    ::= { paramEntry 16 }

embGroup4 OBJECT-TYPE
    SYNTAX TypeEmbGroup1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4"
    ::= { paramEntry 17 }

sourceAudioOut OBJECT-TYPE
    SYNTAX TypeSourceAudioOut
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for audio output"
    ::= { paramEntry 18 }

fSLevel OBJECT-TYPE
    SYNTAX TypeFSLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Full-Scale level for analog audio output"
    ::= { paramEntry 19 }

hDMIAudioEmbed OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable audio embedding for HDMI output"
    ::= { paramEntry 20 }

hDMIAudioEmbedMode OBJECT-TYPE
    SYNTAX TypeHDMIAudioEmbedMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embeds channels 1-8/9-16 or selected audio channel for HDMI output"
    ::= { paramEntry 21 }

displayTimeCode OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Shows Time Code on the display"
    ::= { paramEntry 22 }

displayMetaData OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Shows Meta Data on the display"
    ::= { paramEntry 23 }

safeAreaBurnin OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable burn-in overlay of Safe Area Markers.<br>The exact markers and their position can be specified with various other switches."
    ::= { paramEntry 24 }

hVDelay OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Shift the active image content in H and/or V direction<br>so that the H/V interval becomes visible in the center of the display. Details can be configured with switch <i>H/V Delay Selection</i>."
    ::= { paramEntry 25 }

hDMIITContentType OBJECT-TYPE
    SYNTAX TypeHDMIITContentType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the IT Content Type for the HDMI output signal according to CEA-861-E."
    ::= { paramEntry 26 }

sDIInputColorRangeStatus OBJECT-TYPE
    SYNTAX TypeSDIInputColorRangeStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the SDI input color range"
    ::= { paramEntry 27 }

sDIInputColorimetryStatus OBJECT-TYPE
    SYNTAX TypeSDIInputColorimetryStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the SDI input colorimetry"
    ::= { paramEntry 28 }

sDIInputEOTFStatus OBJECT-TYPE
    SYNTAX TypeSDIInputEOTFStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the SDI input EOTF"
    ::= { paramEntry 29 }

sDIIn3GFormat OBJECT-TYPE
    SYNTAX TypeSDIIn3GFormat
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "3G Format of the SDI input signal"
    ::= { paramEntry 30 }

audioSource3GLevelB OBJECT-TYPE
    SYNTAX TypeAudioSource3GLevelB
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the 3G Level B Audio Source"
    ::= { paramEntry 31 }

audioSourceStatus3GLevelB OBJECT-TYPE
    SYNTAX TypeAudioSourceStatus3GLevelB
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the 3G Level B Audio Source"
    ::= { paramEntry 32 }

displayTimeCodeAutomatic OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Let the device select the shown timecodes automatically"
    ::= { paramEntry 33 }

displayTimeCodeATCLTC OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show the ATC LTC timecode in the HDMI output signal"
    ::= { paramEntry 34 }

displayTimeCodeATCVITC OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show the ATC VITC timecode in the HDMI output signal"
    ::= { paramEntry 35 }

displayTimeCodeDVITC OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show the DVITC timecode in the HDMI output signal"
    ::= { paramEntry 36 }

centerCut2K OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Center cut for some large video formats"
    ::= { paramEntry 37 }

fiberInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable or disable the fiber input"
    ::= { paramEntry 38 }

hDMIOutputStandard OBJECT-TYPE
    SYNTAX TypeSDIInputStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of HDMI output"
    ::= { paramEntry 39 }

sourceAudioOutSwitchPosition OBJECT-TYPE
    SYNTAX TypeSourceAudioOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Source for audio output"
    ::= { paramEntry 40 }

fSLevelSwitchPosition OBJECT-TYPE
    SYNTAX TypeFSLevel
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-Scale level for analog audio output"
    ::= { paramEntry 41 }

hDMIAudioEmbedSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable audio embedding for HDMI output (Switch Position)"
    ::= { paramEntry 42 }

hDMIAudioEmbedModeSwitchPosition OBJECT-TYPE
    SYNTAX TypeHDMIAudioEmbedMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Embeds channels 1-8/9-16 or selected audio channel for HDMI output (Switch Position)"
    ::= { paramEntry 43 }

displayTimeCodeSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows Time Code on the display (Switch Position)"
    ::= { paramEntry 44 }

displayMetaDataSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows Meta Data on the display (Switch Position)"
    ::= { paramEntry 45 }

centerCut2KSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Center cut for some large video formats (Switch Position)"
    ::= { paramEntry 46 }

fiberInputSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable or disable the fiber input (Switch Position)"
    ::= { paramEntry 47 }

sDIInputColorRange OBJECT-TYPE
    SYNTAX TypeSDIInputColorRange
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select color range for SDI input.<br>As per the Auto (default value), the color range will be selected based on the SDI input and/or the VPID information"
    ::= { paramEntry 48 }

sFPModulePartNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of used SFP Module"
    ::= { paramEntry 49 }

sFPModuleType OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "displays the type of detected SFP-Module . The SFP part number will also be  displayed if SFP-Module is unknown."
    ::= { paramEntry 50 }

hVDelaySwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shift the active image content in H and/or V direction<br>so that the H/V interval becomes visible in the center of the display. Details can be configured with switch <i>H/V Delay Selection</i>."
    ::= { paramEntry 51 }

safeAreaBurninSwitchPosition OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable burn-in overlay of Safe Area Markers.<br>The exact markers and their position can be specified with various other switches."
    ::= { paramEntry 52 }

stereoscopicHDMI3DFormat OBJECT-TYPE
    SYNTAX TypeStereoscopicHDMI3DFormat
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set HDMI 3D output format<br> in which 3D content shall be sent over HDMI, if applicable. By default (automatic), the format is derived from the 3D format of the SDI input signal (see parameter <i>SDI 3D Input format</i>). The result of the automatic decision can be seen in the current value of parameter <i>HDMI 3D Output Format Status</i>."
    ::= { paramEntry 53 }

stereoscopicHDMI3DFormatStatus OBJECT-TYPE
    SYNTAX TypeStereoscopicHDMI3DFormatStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "3D status of the generated HDMI signal.<br>It is either <i>no 3D</i> for non-stereoscopic contents. Or it shows the exact mode in which the LE/RE information is being encoded. See parameter <i>HDMI 3D Output Format</i>."
    ::= { paramEntry 54 }

stereoscopicSDI3DFormat OBJECT-TYPE
    SYNTAX TypeStereoscopicSDI3DFormat
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set 3D format of the incoming SDI stream.<br>By default (automatic), the format is derived from the contained VPID (SMPTE 452-2:2012). If no such VPID can be detected, the SDI input will (by default) be processed as regular 2D content. Also see switch <i>Select Stream</i>."
    ::= { paramEntry 55 }

stereoscopicSDI3DFormatStatus OBJECT-TYPE
    SYNTAX TypeStereoscopicSDI3DFormatStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "3D status of SDI input signal<br> as set by switch <i>SDI 3D Input Format</i>, resp. as derived from a contained VPID marker."
    ::= { paramEntry 56 }

stereoscopicFlipLeftEye OBJECT-TYPE
    SYNTAX TypeStereoscopicFlipLeftEye
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Flip/mirror the picture content in H and/or V direction.<br>For 3D signals, this applies to the left-eye signal. For 2D signals, this switch has no function."
    ::= { paramEntry 57 }

stereoscopicFlipRightEye OBJECT-TYPE
    SYNTAX TypeStereoscopicFlipLeftEye
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Flip/mirror the picture content in H and/or V direction.<br>For 3D signals, this applies to the right-eye signal."
    ::= { paramEntry 58 }

stereoscopicSDIStreamSwap OBJECT-TYPE
    SYNTAX TypeStereoscopicSDIStreamSwap
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Swap Video Streams.<br>When a 3G/LevelB input signal is processed as 3D content, then the Left-Eye signal will be taken from Stream A while the Right-Eye signal is taken from Stream B. This default selection can be inverted with this switch. When a 3G/LevelB input signal is processed as 2D content, only one stream can processed. By default this is stream A. This switch will select Stream B instead. This switch has no function if the SDI input is NOT a 3G/LevelB stream."
    ::= { paramEntry 59 }

flipSignal OBJECT-TYPE
    SYNTAX TypeStereoscopicFlipLeftEye
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Flip/mirror the picture content in H and/or V direction."
    ::= { paramEntry 60 }

safeAreaCenterCross OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert a cross marker in the center of the active image<br> as defined by EBU R95-2008.<br>NOTE that these markers are shown only if the <i>Safe Area Marker</i> DIP switch (on the yellobrik case) is set to ON."
    ::= { paramEntry 61 }

safeAreaARM OBJECT-TYPE
    SYNTAX TypeSafeAreaARM
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert two lines to mark the border of the selected aspect ratio content<br> as defined by SMPTE RP218-2002 / EBU R95-2008. The areas outside of these markers can be reduced in transparency: see parameter <i>Curtain Transparency</i>. NOTE that these markers are shown only if the <i>Safe Area Marker</i> DIP switch (on the yellobrik case) is set to ON."
    ::= { paramEntry 62 }

safeAreaCurtainTransparency OBJECT-TYPE
    SYNTAX TypeSafeAreaCurtainTransparency
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Define level of transparency<br> for the areas outside of the <i>Aspect Ratio Markers</i> (as enabled by switch <i>Aspect Ratio Marker</i>). By default, those areas are shown unmodified (100% transparency). This switch allows for a reduction of luminance in these <i>out-of-bounds</i> areas."
    ::= { paramEntry 63 }

safeAreaSafeAreaMarkers OBJECT-TYPE
    SYNTAX TypeSafeAreaSafeAreaMarkers
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Define the position of the safe area markers overlay.<br>The choice is between various positions as defined in SMPTE RP218-2002 as well as those define in EBU R95-2008. NOTE that these markers are shown only if the <i>Safe Area Marker</i> DIP switch (on the yellobrik case) is set to ON."
    ::= { paramEntry 64 }

safeAreaSAMfromARM OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set relation of Safe Area Marker Lines.<br>By default, the safe area marker lines (as specified by switch <i>Safe Area Marker</i>) are shown relative to the <i>Aspect Ratio Marker</i> (if enabled). This switch can specify that the <i>Safe Area Marker</i> lines shall be placed relative to the outline of the active picture, independent of the position of the <i>Aspect Ratio Marker</i>."
    ::= { paramEntry 65 }

safeAreaMarkerColor OBJECT-TYPE
    SYNTAX TypeSafeAreaMarkerColor
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Safe Area Marker Color.<br>By default, all Safe Area Marker Overlays are generated in white color. This color can be customized here."
    ::= { paramEntry 66 }

enableRectangle1 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle1"
    ::= { paramEntry 67 }

enableRectangle2 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle2"
    ::= { paramEntry 68 }

enableRectangle3 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle3"
    ::= { paramEntry 69 }

enableRectangle4 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle4"
    ::= { paramEntry 70 }

enableRectangle5 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle5"
    ::= { paramEntry 71 }

enableRectangle6 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle6"
    ::= { paramEntry 72 }

enableRectangle7 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle7"
    ::= { paramEntry 73 }

enableRectangle8 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle8"
    ::= { paramEntry 74 }

enableRectangle9 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle9"
    ::= { paramEntry 75 }

enableRectangle10 OBJECT-TYPE
    SYNTAX TypeSafeAreaCenterCross
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Enable/Rectangle10"
    ::= { paramEntry 76 }

markersCenterCrossHorStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossHor/StartPosH"
    ::= { paramEntry 77 }

markersCenterCrossVertStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossVert/StartPosH"
    ::= { paramEntry 78 }

markersAspectMarkerLeftUpStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerLeft-Up/StartPosH"
    ::= { paramEntry 79 }

markersAspectMarkerRightDownStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerRight-Down/StartPosH"
    ::= { paramEntry 80 }

markersCurtainLeftUpStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainLeft-Up/StartPosH"
    ::= { paramEntry 81 }

markersCurtainRightDownStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainRight-Down/StartPosH"
    ::= { paramEntry 82 }

markersSAMLeftStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMLeft/StartPosH"
    ::= { paramEntry 83 }

markersSAMRightStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMRight/StartPosH"
    ::= { paramEntry 84 }

markersSAMUpStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMUp/StartPosH"
    ::= { paramEntry 85 }

markersSAMDownStartPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMDown/StartPosH"
    ::= { paramEntry 86 }

markersCenterCrossHorStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossHor/StartPosV"
    ::= { paramEntry 87 }

markersCenterCrossVertStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossVert/StartPosV"
    ::= { paramEntry 88 }

markersAspectMarkerLeftUpStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerLeft-Up/StartPosV"
    ::= { paramEntry 89 }

markersAspectMarkerRightDownStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerRight-Down/StartPosV"
    ::= { paramEntry 90 }

markersCurtainLeftUpStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainLeft-Up/StartPosV"
    ::= { paramEntry 91 }

markersCurtainRightDownStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainRight-Down/StartPosV"
    ::= { paramEntry 92 }

markersSAMLeftStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMLeft/StartPosV"
    ::= { paramEntry 93 }

markersSAMRightStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMRight/StartPosV"
    ::= { paramEntry 94 }

markersSAMUpStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMUp/StartPosV"
    ::= { paramEntry 95 }

markersSAMDownStartPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMDown/StartPosV"
    ::= { paramEntry 96 }

markersCenterCrossHorEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossHor/EndPosH"
    ::= { paramEntry 97 }

markersCenterCrossVertEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossVert/EndPosH"
    ::= { paramEntry 98 }

markersAspectMarkerLeftUpEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerLeft-Up/EndPosH"
    ::= { paramEntry 99 }

markersAspectMarkerRightDownEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerRight-Down/EndPosH"
    ::= { paramEntry 100 }

markersCurtainLeftUpEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainLeft-Up/EndPosH"
    ::= { paramEntry 101 }

markersCurtainRightDownEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainRight-Down/EndPosH"
    ::= { paramEntry 102 }

markersSAMLeftEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMLeft/EndPosH"
    ::= { paramEntry 103 }

markersSAMRightEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMRight/EndPosH"
    ::= { paramEntry 104 }

markersSAMUpEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMUp/EndPosH"
    ::= { paramEntry 105 }

markersSAMDownEndPosH OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMDown/EndPosH"
    ::= { paramEntry 106 }

markersCenterCrossHorEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossHor/EndPosV"
    ::= { paramEntry 107 }

markersCenterCrossVertEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CenterCrossVert/EndPosV"
    ::= { paramEntry 108 }

markersAspectMarkerLeftUpEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerLeft-Up/EndPosV"
    ::= { paramEntry 109 }

markersAspectMarkerRightDownEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/AspectMarkerRight-Down/EndPosV"
    ::= { paramEntry 110 }

markersCurtainLeftUpEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainLeft-Up/EndPosV"
    ::= { paramEntry 111 }

markersCurtainRightDownEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/CurtainRight-Down/EndPosV"
    ::= { paramEntry 112 }

markersSAMLeftEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMLeft/EndPosV"
    ::= { paramEntry 113 }

markersSAMRightEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMRight/EndPosV"
    ::= { paramEntry 114 }

markersSAMUpEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMUp/EndPosV"
    ::= { paramEntry 115 }

markersSAMDownEndPosV OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Markers/SAMDown/EndPosV"
    ::= { paramEntry 116 }

hDMIBitDepthStatus OBJECT-TYPE
    SYNTAX TypeHDMIBitDepthStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the used HDMI Bit depth"
    ::= { paramEntry 117 }

hDMIColorSpaceStatus OBJECT-TYPE
    SYNTAX TypeHDMIColorSpaceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the used HDMI Colorspace"
    ::= { paramEntry 118 }

hDMIBitDepth OBJECT-TYPE
    SYNTAX TypeHDMIBitDepth
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set bit depth for HDMI output.<br>Per default (auto), the bit depth will be selected based on the EDID information provided by the HDMI destination."
    ::= { paramEntry 119 }

hDMIColorSpace OBJECT-TYPE
    SYNTAX TypeHDMIColorSpace
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select color space for HDMI output.<br>Per default (auto), the color space will be selected based on the EDID information provided by the HDMI destination."
    ::= { paramEntry 120 }

hDMIColorRange OBJECT-TYPE
    SYNTAX TypeHDMIColorRange
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select color range for HDMI output.<br>Per default, the color range will be selected based on the EDID information provided by the HDMI destination."
    ::= { paramEntry 121 }

hDMIColorimetry OBJECT-TYPE
    SYNTAX TypeHDMIColorimetry
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Selects how the HDMI output is marked and which Conversion-Matrix is used when converting between YCbCr and RGB.<br>There is no conversion between different colorimetries.As per the Auto (default value), the colorimetry will be selected based on the SDI input and/or VPID information."
    ::= { paramEntry 122 }

hDMIEOTF OBJECT-TYPE
    SYNTAX TypeHDMIEOTF
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Selects how the HDMI output is marked.<br>There is no conversion between different EOTFs.As per the Auto (default value), the EOTF will be selected based on the SDI input and/or VPID information."
    ::= { paramEntry 123 }

audioChannelAssignment OBJECT-TYPE
    SYNTAX TypeAudioChannelAssignment
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Switch between different allocations of audio channels.<br>By default, all audio channels (1 through 8) are mapped <b>1:1</b> between SDI and HDMI.  If set to <b>convert</b>, channels 3 and 4 are swapped against each other, resulting in a conversion between the allocation according to SMPTE320M (3=Center /4=LFE) and CEA-861 (3=LFE / 4=FrontCenter)."
    ::= { paramEntry 124 }

outputMode OBJECT-TYPE
    SYNTAX TypeOutputMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the used output mode"
    ::= { paramEntry 125 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of CDH1813 parameters"
    ::= { sw944 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of CDH1813 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    locate OnOffValue,
    statusColor TypeStatusColor,
    statusColorRGB TypeStatusColorRGB,
    sDIInputStandard TypeSDIInputStandard,
    sDIColorSpaceStatus TypeSDIColorSpaceStatus,
    embGroup1 TypeEmbGroup1,
    embGroup2 TypeEmbGroup1,
    embGroup3 TypeEmbGroup1,
    embGroup4 TypeEmbGroup1,
    sourceAudioOut TypeSourceAudioOut,
    fSLevel TypeFSLevel,
    hDMIAudioEmbed OnOffValue,
    hDMIAudioEmbedMode TypeHDMIAudioEmbedMode,
    displayTimeCode OnOffValue,
    displayMetaData OnOffValue,
    safeAreaBurnin OnOffValue,
    hVDelay OnOffValue,
    hDMIITContentType TypeHDMIITContentType,
    sDIInputColorRangeStatus TypeSDIInputColorRangeStatus,
    sDIInputColorimetryStatus TypeSDIInputColorimetryStatus,
    sDIInputEOTFStatus TypeSDIInputEOTFStatus,
    sDIIn3GFormat TypeSDIIn3GFormat,
    audioSource3GLevelB TypeAudioSource3GLevelB,
    audioSourceStatus3GLevelB TypeAudioSourceStatus3GLevelB,
    displayTimeCodeAutomatic OnOffValue,
    displayTimeCodeATCLTC OnOffValue,
    displayTimeCodeATCVITC OnOffValue,
    displayTimeCodeDVITC OnOffValue,
    centerCut2K OnOffValue,
    fiberInput OnOffValue,
    hDMIOutputStandard TypeSDIInputStandard,
    sourceAudioOutSwitchPosition TypeSourceAudioOut,
    fSLevelSwitchPosition TypeFSLevel,
    hDMIAudioEmbedSwitchPosition OnOffValue,
    hDMIAudioEmbedModeSwitchPosition TypeHDMIAudioEmbedMode,
    displayTimeCodeSwitchPosition OnOffValue,
    displayMetaDataSwitchPosition OnOffValue,
    centerCut2KSwitchPosition OnOffValue,
    fiberInputSwitchPosition OnOffValue,
    sDIInputColorRange TypeSDIInputColorRange,
    sFPModulePartNumber DisplayString,
    sFPModuleType DisplayString,
    hVDelaySwitchPosition OnOffValue,
    safeAreaBurninSwitchPosition OnOffValue,
    stereoscopicHDMI3DFormat TypeStereoscopicHDMI3DFormat,
    stereoscopicHDMI3DFormatStatus TypeStereoscopicHDMI3DFormatStatus,
    stereoscopicSDI3DFormat TypeStereoscopicSDI3DFormat,
    stereoscopicSDI3DFormatStatus TypeStereoscopicSDI3DFormatStatus,
    stereoscopicFlipLeftEye TypeStereoscopicFlipLeftEye,
    stereoscopicFlipRightEye TypeStereoscopicFlipLeftEye,
    stereoscopicSDIStreamSwap TypeStereoscopicSDIStreamSwap,
    flipSignal TypeStereoscopicFlipLeftEye,
    safeAreaCenterCross TypeSafeAreaCenterCross,
    safeAreaARM TypeSafeAreaARM,
    safeAreaCurtainTransparency TypeSafeAreaCurtainTransparency,
    safeAreaSafeAreaMarkers TypeSafeAreaSafeAreaMarkers,
    safeAreaSAMfromARM TypeSafeAreaCenterCross,
    safeAreaMarkerColor TypeSafeAreaMarkerColor,
    enableRectangle1 TypeSafeAreaCenterCross,
    enableRectangle2 TypeSafeAreaCenterCross,
    enableRectangle3 TypeSafeAreaCenterCross,
    enableRectangle4 TypeSafeAreaCenterCross,
    enableRectangle5 TypeSafeAreaCenterCross,
    enableRectangle6 TypeSafeAreaCenterCross,
    enableRectangle7 TypeSafeAreaCenterCross,
    enableRectangle8 TypeSafeAreaCenterCross,
    enableRectangle9 TypeSafeAreaCenterCross,
    enableRectangle10 TypeSafeAreaCenterCross,
    markersCenterCrossHorStartPosH Integer32,
    markersCenterCrossVertStartPosH Integer32,
    markersAspectMarkerLeftUpStartPosH Integer32,
    markersAspectMarkerRightDownStartPosH Integer32,
    markersCurtainLeftUpStartPosH Integer32,
    markersCurtainRightDownStartPosH Integer32,
    markersSAMLeftStartPosH Integer32,
    markersSAMRightStartPosH Integer32,
    markersSAMUpStartPosH Integer32,
    markersSAMDownStartPosH Integer32,
    markersCenterCrossHorStartPosV Integer32,
    markersCenterCrossVertStartPosV Integer32,
    markersAspectMarkerLeftUpStartPosV Integer32,
    markersAspectMarkerRightDownStartPosV Integer32,
    markersCurtainLeftUpStartPosV Integer32,
    markersCurtainRightDownStartPosV Integer32,
    markersSAMLeftStartPosV Integer32,
    markersSAMRightStartPosV Integer32,
    markersSAMUpStartPosV Integer32,
    markersSAMDownStartPosV Integer32,
    markersCenterCrossHorEndPosH Integer32,
    markersCenterCrossVertEndPosH Integer32,
    markersAspectMarkerLeftUpEndPosH Integer32,
    markersAspectMarkerRightDownEndPosH Integer32,
    markersCurtainLeftUpEndPosH Integer32,
    markersCurtainRightDownEndPosH Integer32,
    markersSAMLeftEndPosH Integer32,
    markersSAMRightEndPosH Integer32,
    markersSAMUpEndPosH Integer32,
    markersSAMDownEndPosH Integer32,
    markersCenterCrossHorEndPosV Integer32,
    markersCenterCrossVertEndPosV Integer32,
    markersAspectMarkerLeftUpEndPosV Integer32,
    markersAspectMarkerRightDownEndPosV Integer32,
    markersCurtainLeftUpEndPosV Integer32,
    markersCurtainRightDownEndPosV Integer32,
    markersSAMLeftEndPosV Integer32,
    markersSAMRightEndPosV Integer32,
    markersSAMUpEndPosV Integer32,
    markersSAMDownEndPosV Integer32,
    hDMIBitDepthStatus TypeHDMIBitDepthStatus,
    hDMIColorSpaceStatus TypeHDMIColorSpaceStatus,
    hDMIBitDepth TypeHDMIBitDepth,
    hDMIColorSpace TypeHDMIColorSpace,
    hDMIColorRange TypeHDMIColorRange,
    hDMIColorimetry TypeHDMIColorimetry,
    hDMIEOTF TypeHDMIEOTF,
    audioChannelAssignment TypeAudioChannelAssignment,
    outputMode TypeOutputMode }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of CDH1813"
    ::= { sw944 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        locate,
        statusColor,
        statusColorRGB,
        sDIInputStandard,
        sDIColorSpaceStatus,
        embGroup1,
        embGroup2,
        embGroup3,
        embGroup4,
        sourceAudioOut,
        fSLevel,
        hDMIAudioEmbed,
        hDMIAudioEmbedMode,
        displayTimeCode,
        displayMetaData,
        safeAreaBurnin,
        hVDelay,
        hDMIITContentType,
        sDIInputColorRangeStatus,
        sDIInputColorimetryStatus,
        sDIInputEOTFStatus,
        sDIIn3GFormat,
        audioSource3GLevelB,
        audioSourceStatus3GLevelB,
        displayTimeCodeAutomatic,
        displayTimeCodeATCLTC,
        displayTimeCodeATCVITC,
        displayTimeCodeDVITC,
        centerCut2K,
        fiberInput,
        hDMIOutputStandard,
        sourceAudioOutSwitchPosition,
        fSLevelSwitchPosition,
        hDMIAudioEmbedSwitchPosition,
        hDMIAudioEmbedModeSwitchPosition,
        displayTimeCodeSwitchPosition,
        displayMetaDataSwitchPosition,
        centerCut2KSwitchPosition,
        fiberInputSwitchPosition,
        sDIInputColorRange,
        sFPModulePartNumber,
        sFPModuleType,
        hVDelaySwitchPosition,
        safeAreaBurninSwitchPosition,
        stereoscopicHDMI3DFormat,
        stereoscopicHDMI3DFormatStatus,
        stereoscopicSDI3DFormat,
        stereoscopicSDI3DFormatStatus,
        stereoscopicFlipLeftEye,
        stereoscopicFlipRightEye,
        stereoscopicSDIStreamSwap,
        flipSignal,
        safeAreaCenterCross,
        safeAreaARM,
        safeAreaCurtainTransparency,
        safeAreaSafeAreaMarkers,
        safeAreaSAMfromARM,
        safeAreaMarkerColor,
        enableRectangle1,
        enableRectangle2,
        enableRectangle3,
        enableRectangle4,
        enableRectangle5,
        enableRectangle6,
        enableRectangle7,
        enableRectangle8,
        enableRectangle9,
        enableRectangle10,
        markersCenterCrossHorStartPosH,
        markersCenterCrossVertStartPosH,
        markersAspectMarkerLeftUpStartPosH,
        markersAspectMarkerRightDownStartPosH,
        markersCurtainLeftUpStartPosH,
        markersCurtainRightDownStartPosH,
        markersSAMLeftStartPosH,
        markersSAMRightStartPosH,
        markersSAMUpStartPosH,
        markersSAMDownStartPosH,
        markersCenterCrossHorStartPosV,
        markersCenterCrossVertStartPosV,
        markersAspectMarkerLeftUpStartPosV,
        markersAspectMarkerRightDownStartPosV,
        markersCurtainLeftUpStartPosV,
        markersCurtainRightDownStartPosV,
        markersSAMLeftStartPosV,
        markersSAMRightStartPosV,
        markersSAMUpStartPosV,
        markersSAMDownStartPosV,
        markersCenterCrossHorEndPosH,
        markersCenterCrossVertEndPosH,
        markersAspectMarkerLeftUpEndPosH,
        markersAspectMarkerRightDownEndPosH,
        markersCurtainLeftUpEndPosH,
        markersCurtainRightDownEndPosH,
        markersSAMLeftEndPosH,
        markersSAMRightEndPosH,
        markersSAMUpEndPosH,
        markersSAMDownEndPosH,
        markersCenterCrossHorEndPosV,
        markersCenterCrossVertEndPosV,
        markersAspectMarkerLeftUpEndPosV,
        markersAspectMarkerRightDownEndPosV,
        markersCurtainLeftUpEndPosV,
        markersCurtainRightDownEndPosV,
        markersSAMLeftEndPosV,
        markersSAMRightEndPosV,
        markersSAMUpEndPosV,
        markersSAMDownEndPosV,
        hDMIBitDepthStatus,
        hDMIColorSpaceStatus,
        hDMIBitDepth,
        hDMIColorSpace,
        hDMIColorRange,
        hDMIColorimetry,
        hDMIEOTF,
        audioChannelAssignment,
        outputMode }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END