-- Machine generated MIB file, do not edit!
--
-- MIB file for CDX5024-C, type code 02.8D, software label 133
-- Generated on Tuesday, 09-Aug-16 09:36:16 UTC
-- CVS $Id: CDX5024-C_028d_sw133.mib,v 1.14 2016/08/09 09:36:20 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

CDX5024-C-028d-sw133-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

cdx5024-c-028d-sw133 MODULE-IDENTITY
    LAST-UPDATED "201608090936Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for CDX5024-C, type code 02.8D, software label 133"
    REVISION "201608090936Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 653133 }

cdx5024-c-028d OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type CDX5024-C"
    ::= { products 653 }

sw133 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 133"
    ::= { cdx5024-c-028d 133 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeDeembedder ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        group1(1),
        group2(2),
        group3(3),
        group4(4)
    }

TypeInputStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        n625(1),
        n525(2)
    }

TypeAES1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aES1(0),
        aES2(1),
        aES1X(2),
        aES2X(3)
    }

TypeFSLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n12DBu(0),
        n15DBu(1),
        n18DBu(2),
        n20DBu(3),
        n22DBu(4),
        n24DBu(5)
    }

TypeTestPattern ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        colorbar(1)
    }

TypeStandardSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        followLastInput(0),
        n525(1),
        n625(2)
    }

TypeAVidOut1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        cvbs(0),
        sVideo(1)
    }

TypeAVidYLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        smpte(0),
        betacam(1)
    }

TypeAVidUVLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n700mV(0),
        n1000mV(1)
    }

TypeAVidLimiter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        disable(0),
        n15IRE(1),
        n60IRE(2),
        n110IRE(3)
    }

TypeAVidYUVLevelAdjust ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        fixed(0),
        adjust(1)
    }

TypeAVidLuminanceFilter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lowPass(0),
        notchFilter(1),
        lowPassX(2),
        notchFilterX(3),
        extendedMode(4),
        cif(5)
    }

TypeAVidChrominanceFilter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n065MHzLP(0),
        n100MHzLP(1),
        n130MHzLP(2),
        n200MHzLP(3),
        n300MHzLP(4),
        cif(5),
        qcif(6)
    }

TypeAVidblankVBI ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        transparent(0),
        blank(1)
    }

TypeAVidchromCtl ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeAVidactiveLineDuration ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        cCIR601(0),
        iTUB470(1)
    }

TypeAVidlumaDelay ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0Ns(0),
        n74Ns(1),
        n148Ns(2),
        n222Ns(3)
    }

TypeAVidchromaDelay ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0Ns(0),
        n148Ns(1),
        n296Ns(2)
    }

TypeEventSDIInputNoInputSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventSDIInputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: SDI Input No Input"
    ::= { paramEntry 14 }

eventDeembedderGroupnotEmbedded OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Deembedder Group not Embedded"
    ::= { paramEntry 15 }

event525videoinput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 525 video input"
    ::= { paramEntry 16 }

deembedder OBJECT-TYPE
    SYNTAX TypeDeembedder
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select which group (out of 4) to deembed from the incoming SDI<br>(1 group contains two AES streams)"
    ::= { paramEntry 17 }

inputStandard OBJECT-TYPE
    SYNTAX TypeInputStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Current SDI input status"
    ::= { paramEntry 18 }

aES1 OBJECT-TYPE
    SYNTAX TypeAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1"
    ::= { paramEntry 19 }

aES2 OBJECT-TYPE
    SYNTAX TypeAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2"
    ::= { paramEntry 20 }

analogAudio12 OBJECT-TYPE
    SYNTAX TypeAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for Analog Audio output 1/2"
    ::= { paramEntry 21 }

analogAudio34 OBJECT-TYPE
    SYNTAX TypeAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for Analog Audio output 3/4"
    ::= { paramEntry 22 }

swapAudio1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Swap analog audio output 1 (L <-> R)"
    ::= { paramEntry 25 }

swapAudio2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Swap analog audio output 2 (L <-> R)"
    ::= { paramEntry 26 }

deemphAudio1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Deemphase analog audio output 1 (L/R)"
    ::= { paramEntry 27 }

deemphAudio2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Deemphase analog audio output 2 (L/R)"
    ::= { paramEntry 28 }

analogAudioGain1L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "gain level in analog audio out 1L [dB]"
    ::= { paramEntry 29 }

analogAudioGain1R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "gain level in analog audio out 1R [dB]"
    ::= { paramEntry 30 }

gangAudioGains1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gang-Mode: Couple the two gain values (L+R) of audio channel 1 (modify them synchronously, as a stereo-pair)"
    ::= { paramEntry 31 }

analogAudioGain2L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "gain level in analog audio out 2L [dB]"
    ::= { paramEntry 32 }

analogAudioGain2R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "gain level in analog audio out 2R [dB]"
    ::= { paramEntry 33 }

gangAudioGains2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gang-Mode: Couple the two gain values (L+R) of audio channel 2 (modify them synchronously, as a stereo-pair)"
    ::= { paramEntry 34 }

fSLevel OBJECT-TYPE
    SYNTAX TypeFSLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify FSLevel [dBu] for all analog gain outputs"
    ::= { paramEntry 35 }

testPattern OBJECT-TYPE
    SYNTAX TypeTestPattern
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Video Test pattern"
    ::= { paramEntry 36 }

standardSelect OBJECT-TYPE
    SYNTAX TypeStandardSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Test pattern standard (if no current input standard)"
    ::= { paramEntry 37 }

autoTestPattern OBJECT-TYPE
    SYNTAX TypeTestPattern
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select if a testpattern shall be shown at the output when there is no current input"
    ::= { paramEntry 38 }

aVidOut1 OBJECT-TYPE
    SYNTAX TypeAVidOut1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: select video format"
    ::= { paramEntry 39 }

aVidPedestal OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: add Pedestal (applies to NTSC/525 output format only)"
    ::= { paramEntry 40 }

aVidYLevel OBJECT-TYPE
    SYNTAX TypeAVidYLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: Gain Y level"
    ::= { paramEntry 41 }

aVidUVLevel OBJECT-TYPE
    SYNTAX TypeAVidUVLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: UV level"
    ::= { paramEntry 42 }

aVidLimiter OBJECT-TYPE
    SYNTAX TypeAVidLimiter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: luminance undershot limiter"
    ::= { paramEntry 43 }

aVidClip OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: luma saturation control (Clip)"
    ::= { paramEntry 44 }

aVidYUVLevelAdjust OBJECT-TYPE
    SYNTAX TypeAVidYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: YUV level adjust"
    ::= { paramEntry 45 }

aVidLuminanceLevel OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: Luminance (Y) Level"
    ::= { paramEntry 46 }

aVidULevel OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: Chrominance (U) Level"
    ::= { paramEntry 47 }

aVidVLevel OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: Chrominance (V) Level"
    ::= { paramEntry 48 }

aVidBlackLevelAdjust OBJECT-TYPE
    SYNTAX TypeAVidYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: black level adjust"
    ::= { paramEntry 49 }

aVidBlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: Black Level"
    ::= { paramEntry 50 }

aVidSharpnessAdjust OBJECT-TYPE
    SYNTAX TypeAVidYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: sharpness adjust (Note: setting this to ADJUST will set aVid/LuminanceFilter to Extended"
    ::= { paramEntry 51 }

aVidSharpness OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: sharpness"
    ::= { paramEntry 52 }

aVidHueAdjust OBJECT-TYPE
    SYNTAX TypeAVidYUVLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: hue adjust"
    ::= { paramEntry 53 }

aVidHue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: hue"
    ::= { paramEntry 54 }

aVidLuminanceFilter OBJECT-TYPE
    SYNTAX TypeAVidLuminanceFilter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: luminance filter (Note: setting this to anything but Extended will disable aVid/SharpnessAdjust)"
    ::= { paramEntry 55 }

aVidChrominanceFilter OBJECT-TYPE
    SYNTAX TypeAVidChrominanceFilter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: chrominance filter"
    ::= { paramEntry 56 }

aVidblankVBI OBJECT-TYPE
    SYNTAX TypeAVidblankVBI
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: blank VBI (Vertical Blanking Interval)"
    ::= { paramEntry 57 }

aVidchromCtl OBJECT-TYPE
    SYNTAX TypeAVidchromCtl
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: disable chroma in output"
    ::= { paramEntry 58 }

aVidburstCtrl OBJECT-TYPE
    SYNTAX TypeAVidchromCtl
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: disable burst in output"
    ::= { paramEntry 59 }

aVidactiveLineDuration OBJECT-TYPE
    SYNTAX TypeAVidactiveLineDuration
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: active line duration"
    ::= { paramEntry 60 }

aVidlumaDelay OBJECT-TYPE
    SYNTAX TypeAVidlumaDelay
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: luma delay in [ns]"
    ::= { paramEntry 61 }

aVidchromaDelay OBJECT-TYPE
    SYNTAX TypeAVidchromaDelay
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: chroma delay in [ns]"
    ::= { paramEntry 62 }

aViddoubleBuf OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "analog video out: double buffering on/off"
    ::= { paramEntry 63 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 64 }

eventSDIInputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInputNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input No Input"
    ::= { paramEntry 66 }

eventDeembedderGroupnotEmbeddedSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInputNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Deembedder Group not Embedded"
    ::= { paramEntry 67 }

event525videoinputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInputNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 525 video input"
    ::= { paramEntry 68 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 69 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of CDX5024-C parameters"
    ::= { sw133 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of CDX5024-C parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventSDIInputNoInput OnOffValue,
    eventDeembedderGroupnotEmbedded OnOffValue,
    event525videoinput OnOffValue,
    deembedder TypeDeembedder,
    inputStandard TypeInputStandard,
    aES1 TypeAES1,
    aES2 TypeAES1,
    analogAudio12 TypeAES1,
    analogAudio34 TypeAES1,
    swapAudio1 OnOffValue,
    swapAudio2 OnOffValue,
    deemphAudio1 OnOffValue,
    deemphAudio2 OnOffValue,
    analogAudioGain1L FixedPointValue1,
    analogAudioGain1R FixedPointValue1,
    gangAudioGains1 OnOffValue,
    analogAudioGain2L FixedPointValue1,
    analogAudioGain2R FixedPointValue1,
    gangAudioGains2 OnOffValue,
    fSLevel TypeFSLevel,
    testPattern TypeTestPattern,
    standardSelect TypeStandardSelect,
    autoTestPattern TypeTestPattern,
    aVidOut1 TypeAVidOut1,
    aVidPedestal OnOffValue,
    aVidYLevel TypeAVidYLevel,
    aVidUVLevel TypeAVidUVLevel,
    aVidLimiter TypeAVidLimiter,
    aVidClip OnOffValue,
    aVidYUVLevelAdjust TypeAVidYUVLevelAdjust,
    aVidLuminanceLevel FixedPointValue2,
    aVidULevel FixedPointValue2,
    aVidVLevel FixedPointValue2,
    aVidBlackLevelAdjust TypeAVidYUVLevelAdjust,
    aVidBlackLevel FixedPointValue1,
    aVidSharpnessAdjust TypeAVidYUVLevelAdjust,
    aVidSharpness FixedPointValue3,
    aVidHueAdjust TypeAVidYUVLevelAdjust,
    aVidHue FixedPointValue1,
    aVidLuminanceFilter TypeAVidLuminanceFilter,
    aVidChrominanceFilter TypeAVidChrominanceFilter,
    aVidblankVBI TypeAVidblankVBI,
    aVidchromCtl TypeAVidchromCtl,
    aVidburstCtrl TypeAVidchromCtl,
    aVidactiveLineDuration TypeAVidactiveLineDuration,
    aVidlumaDelay TypeAVidlumaDelay,
    aVidchromaDelay TypeAVidchromaDelay,
    aViddoubleBuf OnOffValue,
    boardID Integer32,
    eventSDIInputNoInputSNMP TypeEventSDIInputNoInputSNMP,
    eventDeembedderGroupnotEmbeddedSNMP TypeEventSDIInputNoInputSNMP,
    event525videoinputSNMP TypeEventSDIInputNoInputSNMP,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of CDX5024-C"
    ::= { sw133 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventSDIInputNoInput,
        eventDeembedderGroupnotEmbedded,
        event525videoinput,
        deembedder,
        inputStandard,
        aES1,
        aES2,
        analogAudio12,
        analogAudio34,
        swapAudio1,
        swapAudio2,
        deemphAudio1,
        deemphAudio2,
        analogAudioGain1L,
        analogAudioGain1R,
        gangAudioGains1,
        analogAudioGain2L,
        analogAudioGain2R,
        gangAudioGains2,
        fSLevel,
        testPattern,
        standardSelect,
        autoTestPattern,
        aVidOut1,
        aVidPedestal,
        aVidYLevel,
        aVidUVLevel,
        aVidLimiter,
        aVidClip,
        aVidYUVLevelAdjust,
        aVidLuminanceLevel,
        aVidULevel,
        aVidVLevel,
        aVidBlackLevelAdjust,
        aVidBlackLevel,
        aVidSharpnessAdjust,
        aVidSharpness,
        aVidHueAdjust,
        aVidHue,
        aVidLuminanceFilter,
        aVidChrominanceFilter,
        aVidblankVBI,
        aVidchromCtl,
        aVidburstCtrl,
        aVidactiveLineDuration,
        aVidlumaDelay,
        aVidchromaDelay,
        aViddoubleBuf,
        boardID,
        eventSDIInputNoInputSNMP,
        eventDeembedderGroupnotEmbeddedSNMP,
        event525videoinputSNMP,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END