-- Machine generated MIB file, do not edit!
--
-- MIB file for CHD1412, type code 42.37, software label 1165
-- Generated on Wednesday, 18-Oct-23 14:50:35 CEST
-- CVS $Id: CHD1412_4237_sw1165.mib,v 1.1 2023/10/18 12:50:36 til Exp $
--
-- Copyright 2003-2023 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

CHD1412-4237-sw1165-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

chd1412-4237-sw1165 MODULE-IDENTITY
    LAST-UPDATED "202310181250Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for CHD1412, type code 42.37, software label 1165"
    REVISION "202310181250Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 16952165 }

chd1412-4237 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type CHD1412"
    ::= { products 16951 }

sw1165 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 1165"
    ::= { chd1412-4237 1165 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeInputAudioLedPresentColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        offX(1),
        green(2),
        greenX(3)
    }

TypeInputAudioLedPresentColorRGB ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n000000(0),
        ff0000(1),
        n00ff00(2),
        ffff00(3)
    }

TypeEventReferenceNoInputSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

TypeInputHDMIVideoStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        pCStandard(2),
        n525(3),
        n525X(4),
        n625(5),
        n720p60(6),
        n720p5994(7),
        n720p50(8),
        n720p30(9),
        n720p2997(10),
        n720p25(11),
        n720p24(12),
        n720p2398(13),
        n1080i60(14),
        n1080i5994(15),
        n1080i50(16),
        n1080p60(17),
        n1080p5994(18),
        n1080p50(19),
        n1080p30(20),
        n1080p2997(21),
        n1080p25(22),
        n1080p24(23),
        n1080p2398(24),
        n1080psF30(25),
        n1080psF2997(26),
        n1080psF25(27),
        n1080psF24(28),
        n1080psF2398(29),
        n2160p60(30),
        n2160p5994(31),
        n2160p50(32),
        n2160p30(33),
        n2160p2997(34),
        n2160p25(35),
        n2160p24(36),
        n2160p2398(37)
    }

TypeInputHDMIVideoBitDepthStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n81012Bit(0),
        n81012BitX(1),
        n81012BitXX(2),
        n81012BitXXX(3),
        n8Bit(4),
        n10Bit(5),
        n12Bit(6),
        n16Bit(7)
    }

TypeInputHDMIVideoColorimetryStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        other(0),
        bT601(1),
        bT709(2),
        bT2020(3)
    }

TypeInputHDMIVideoColorRangeStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        default(0),
        limited(1),
        full(2)
    }

TypeInputHDMIVideoColorSpaceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        rgb(0),
        yCbCr420(1),
        yCbCr422(2),
        yCbCr444(3)
    }

TypeInputHDMIVideoEOTFStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        gammaSDR(0),
        gammaHDR(1),
        sT2084PQ(2),
        hlg(3)
    }

TypeInputHDMIVideoScanFormat ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        p(0),
        i(1)
    }

TypeInputHDMIAudioType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        notEmbedded(0),
        stereo(1),
        surround(2),
        surroundX(3)
    }

TypeInputHDMIMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        dvi(0),
        hdmi(1)
    }

TypeInputHDMIHDCPStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        hDCP1X(1),
        hDCP2X(2)
    }

TypeInputRefStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27)
    }

TypeInputAudioLeft ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        plugged(1)
    }

TypeOutputSDIVideoStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27),
        n2160p60(28),
        n2160p5994(29),
        n2160p50(30),
        n2160p30(31),
        n2160p2997(32),
        n2160p25(33),
        n2160p24(34),
        n2160p2398(35)
    }

TypeOutputSDI3GFormatStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        levelA(0),
        levelB(1)
    }

TypeOutputSDIVideoColorRangeStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        narrow(0),
        full(1)
    }

TypeOutputSDIRefSourceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        freerun(1),
        refIn(2),
        hdmi(3)
    }

TypeOutputSDIRefLockStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unlocked(0),
        locked(1)
    }

TypeOutputSDIVideoShowHDCPStatusSwitchPosition ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeOutputSDIVideoIfNoInput1SwitchPosition ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        dIP5(0),
        off(1)
    }

TypeOutputSDIVideoIfNoInput2SwitchPosition ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freeze(0),
        black(1)
    }

TypeInputAudioSignalTypeSwitchPosition ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        analog(0),
        digital(1)
    }

TypeDip1UnusedSwitchPosition ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        noneX(1)
    }

TypeInputAudioAnalogFSLevelSwitchPosition ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        mute(0),
        lineCons(1),
        linePro(2),
        n12DBu(3),
        n15DBu(4),
        n18DBu(5),
        n20DBu(6),
        n22DBu(7),
        n24DBu(8),
        user(9)
    }

TypeInputAudioEmbedSelectSwitchPosition ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        aES1(1),
        aES2(2),
        aES3(3),
        aES4(4),
        aES5(5),
        aES6(6),
        aES7(7),
        aES8(8)
    }

TypeInputHDMIVideoColorRange ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        full(1),
        limited(2)
    }

TypeInputHDMIEDIDPreferredStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n525(0),
        n625(1),
        n720p60(2),
        n720p5994(3),
        n720p50(4),
        n720p30(5),
        n720p2997(6),
        n720p25(7),
        n720p24(8),
        n720p2398(9),
        n1080i60(10),
        n1080i5994(11),
        n1080i50(12),
        n1080p60(13),
        n1080p5994(14),
        n1080p50(15),
        n1080p30(16),
        n1080p2997(17),
        n1080p25(18),
        n1080p24(19),
        n1080p2398(20),
        n2160p60(21),
        n2160p5994(22),
        n2160p50(23),
        n2160p30(24),
        n2160p2997(25),
        n2160p25(26),
        n2160p24(27),
        n2160p2398(28)
    }

TypeInputHDMIEDIDLimitVideoStandards ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        fullList(0),
        n1080i1080p2430(1),
        n1080p5060(2),
        n2160p2430(3),
        n2160p5060(4)
    }

TypeOutputSDIVideoResolution ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        sd(1),
        n720p(2),
        n1080i(3),
        n1080p(4),
        n1080psF(5),
        n2160p(6)
    }

TypeOutputSDIVideoColorRange ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        full(1),
        narrow(2)
    }

TypeOutputSDIMetaVPIDEOTF ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        sdr(1),
        hlg(2),
        pq(3),
        undefined(4)
    }

TypeOutputSDIMetaVPIDColorimetry ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        bT709(1),
        bT2020(2)
    }

TypeOutputSDIAudioChannelAssignment ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n11(0),
        convert(1)
    }

TypeOutputSDIAudioEmbedInto3GLevelB ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        streamA(0),
        streamB(1),
        streamAB(2)
    }

TypeOutputSDIRefSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        freerun(1),
        refIn(2),
        hdmi(3)
    }

TypeOutputSDIDelayMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        framesLinesPixels(0),
        milliSeconds(1)
    }

TypeOutputSDIVideoInputLossReactionSwitchPosition ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        dip5(0),
        off(1)
    }

TypeInputAudioLeftPlugged ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        no(0),
        yes(1)
    }

TypeInputAudioLeftStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        present(1)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 8 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 9 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 10 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 11 }

inputAudioLedPresentColor OBJECT-TYPE
    SYNTAX TypeInputAudioLedPresentColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Audio Present LED (off/green)"
    ::= { paramEntry 12 }

inputAudioLedPresentColorRGB OBJECT-TYPE
    SYNTAX TypeInputAudioLedPresentColorRGB
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Audio Present LED as #RRGGBB"
    ::= { paramEntry 13 }

eventReferenceNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Reference No Input"
    ::= { paramEntry 15 }

eventAESInputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input No Input"
    ::= { paramEntry 16 }

eventHighTemperature OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: High Temperature"
    ::= { paramEntry 17 }

eventFanFailure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Fan Failure"
    ::= { paramEntry 18 }

eventReferenceNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Reference No Input"
    ::= { paramEntry 19 }

eventAESInputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input No Input"
    ::= { paramEntry 20 }

eventHighTemperatureSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: High Temperature"
    ::= { paramEntry 21 }

eventFanFailureSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Fan Failure"
    ::= { paramEntry 22 }

inputHDMIVideoStandard OBJECT-TYPE
    SYNTAX TypeInputHDMIVideoStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of HDMI input."
    ::= { paramEntry 24 }

inputHDMIVideoBitDepthStatus OBJECT-TYPE
    SYNTAX TypeInputHDMIVideoBitDepthStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Bit Depth of HDMI input."
    ::= { paramEntry 25 }

inputHDMIVideoColorimetryStatus OBJECT-TYPE
    SYNTAX TypeInputHDMIVideoColorimetryStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Colorimetry of HDMI input."
    ::= { paramEntry 26 }

inputHDMIVideoColorRangeStatus OBJECT-TYPE
    SYNTAX TypeInputHDMIVideoColorRangeStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Color Range of HDMI input."
    ::= { paramEntry 27 }

inputHDMIVideoColorSpaceStatus OBJECT-TYPE
    SYNTAX TypeInputHDMIVideoColorSpaceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Color Space of HDMI input."
    ::= { paramEntry 28 }

inputHDMIVideoDCIFormatStatus OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DCI Format of HDMI input."
    ::= { paramEntry 29 }

inputHDMIVideoEOTFStatus OBJECT-TYPE
    SYNTAX TypeInputHDMIVideoEOTFStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EOTF of HDMI input."
    ::= { paramEntry 30 }

inputHDMIVideoFrameRate OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Frame Rate of HDMI input."
    ::= { paramEntry 31 }

inputHDMIVideoScanFormat OBJECT-TYPE
    SYNTAX TypeInputHDMIVideoScanFormat
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Scan Format of HDMI input."
    ::= { paramEntry 32 }

inputHDMIVideoFrameWidth OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Frame Width of HDMI input."
    ::= { paramEntry 33 }

inputHDMIVideoFrameHeight OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Frame Height of HDMI input."
    ::= { paramEntry 34 }

inputHDMIVideoResolution OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Resolution and frame rate of HDMI input."
    ::= { paramEntry 35 }

inputHDMIAudioType OBJECT-TYPE
    SYNTAX TypeInputHDMIAudioType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio Type of HDMI input."
    ::= { paramEntry 36 }

inputHDMIMode OBJECT-TYPE
    SYNTAX TypeInputHDMIMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mode of HDMI input,"
    ::= { paramEntry 37 }

inputHDMIHDCPStatus OBJECT-TYPE
    SYNTAX TypeInputHDMIHDCPStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HDCP Status of HDMI input."
    ::= { paramEntry 38 }

inputRefStandard OBJECT-TYPE
    SYNTAX TypeInputRefStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of Ref input."
    ::= { paramEntry 39 }

inputAudioLeft OBJECT-TYPE
    SYNTAX TypeInputAudioLeft
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of left audio input."
    ::= { paramEntry 40 }

inputAudioRight OBJECT-TYPE
    SYNTAX TypeInputAudioLeft
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of right audio input."
    ::= { paramEntry 41 }

outputSDIVideoStandard OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of SDI output."
    ::= { paramEntry 42 }

outputSDI3GFormatStatus OBJECT-TYPE
    SYNTAX TypeOutputSDI3GFormatStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "3G Format of SDI output."
    ::= { paramEntry 43 }

outputSDIVideoColorRangeStatus OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoColorRangeStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Color Range of SDI output."
    ::= { paramEntry 44 }

outputSDIVideoDCIFormatStatus OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DCI Format of SDI output."
    ::= { paramEntry 45 }

outputSDIRefSourceStatus OBJECT-TYPE
    SYNTAX TypeOutputSDIRefSourceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the Reference Source Status."
    ::= { paramEntry 46 }

outputSDIRefLockStatus OBJECT-TYPE
    SYNTAX TypeOutputSDIRefLockStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the Reference Lock Status."
    ::= { paramEntry 47 }

outputSDIVideoShowHDCPStatusSwitchPosition OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoShowHDCPStatusSwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Show text overlay if input is copy protected (HDCP)."
    ::= { paramEntry 48 }

inputRefForceLockSwitchPosition OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoShowHDCPStatusSwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Forces lock to reference or freerun if missing."
    ::= { paramEntry 49 }

outputSDIVideoColorBarSwitchPosition OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoShowHDCPStatusSwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Display color bars at SDI output."
    ::= { paramEntry 50 }

outputSDIVideoIfNoInput1SwitchPosition OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoIfNoInput1SwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Select behaviour in case of input loss."
    ::= { paramEntry 51 }

outputSDIVideoIfNoInput2SwitchPosition OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoIfNoInput2SwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Select behaviour in case of input loss. Only active if DIP5 is selected in DIP4."
    ::= { paramEntry 52 }

inputAudioSignalTypeSwitchPosition OBJECT-TYPE
    SYNTAX TypeInputAudioSignalTypeSwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Select signal type of audio input."
    ::= { paramEntry 53 }

outputSDIAudioCopySwitchPosition OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoShowHDCPStatusSwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Select if UHD Link 2-4 should carry copied audio from Link 1."
    ::= { paramEntry 54 }

dip1UnusedSwitchPosition OBJECT-TYPE
    SYNTAX TypeDip1UnusedSwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Unused"
    ::= { paramEntry 55 }

outputSDIVideoShowHDCPStatus OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoShowHDCPStatusSwitchPosition
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show text overlay if input is copy protected (HDCP)."
    ::= { paramEntry 56 }

inputRefForceLock OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoShowHDCPStatusSwitchPosition
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Forces lock to reference or freerun if missing."
    ::= { paramEntry 57 }

outputSDIVideoColorBar OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoShowHDCPStatusSwitchPosition
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Display color bars at SDI output."
    ::= { paramEntry 58 }

outputSDIVideoIfNoInput1 OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoIfNoInput1SwitchPosition
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select behaviour in case of input loss."
    ::= { paramEntry 59 }

outputSDIVideoIfNoInput2 OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoIfNoInput2SwitchPosition
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select behaviour in case of input loss. Only active if DIP5 is selected in DIP4."
    ::= { paramEntry 60 }

inputAudioSignalType OBJECT-TYPE
    SYNTAX TypeInputAudioSignalTypeSwitchPosition
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select signal type of audio input."
    ::= { paramEntry 61 }

outputSDIAudioCopy OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoShowHDCPStatusSwitchPosition
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select if UHD Link 2-4 should carry copied audio from Link 1."
    ::= { paramEntry 62 }

dip1Unused OBJECT-TYPE
    SYNTAX TypeDip1UnusedSwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Unused"
    ::= { paramEntry 63 }

inputAudioAnalogFSLevelSwitchPosition OBJECT-TYPE
    SYNTAX TypeInputAudioAnalogFSLevelSwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-Scale level for analog audio input"
    ::= { paramEntry 64 }

inputAudioEmbedSelectSwitchPosition OBJECT-TYPE
    SYNTAX TypeInputAudioEmbedSelectSwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Select channel for embedding the external audio into SDI channel.<br>NOTE: The previous content of this channel (if received from HDMI) will be overwritten."
    ::= { paramEntry 65 }

inputAudioAnalogFSLevel OBJECT-TYPE
    SYNTAX TypeInputAudioAnalogFSLevelSwitchPosition
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Full-Scale level for analog audio input"
    ::= { paramEntry 66 }

inputAudioEmbedSelect OBJECT-TYPE
    SYNTAX TypeInputAudioEmbedSelectSwitchPosition
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select channel for embedding the external audio into SDI channel.<br>NOTE: The previous content of this channel (if received from HDMI) will be overwritten."
    ::= { paramEntry 67 }

inputHDMIVideoColorRange OBJECT-TYPE
    SYNTAX TypeInputHDMIVideoColorRange
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set color range of HDMI input."
    ::= { paramEntry 68 }

inputHDMIEDIDPreferredStandard OBJECT-TYPE
    SYNTAX TypeInputHDMIEDIDPreferredStandard
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set preferred Video Standard signaled in EDID. NOTE: Not affected by factory reset."
    ::= { paramEntry 69 }

inputHDMIEDIDLimitVideoStandards OBJECT-TYPE
    SYNTAX TypeInputHDMIEDIDLimitVideoStandards
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Limits the by EDID signaled supported video standard list to the selected or lower resolution/framerate."
    ::= { paramEntry 70 }

inputHDMIEDIDAcceptBT2020 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select if EDID should signal support for BT.2020."
    ::= { paramEntry 71 }

inputHDMIEDIDAcceptHDR OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select if EDID should signal support for HDR."
    ::= { paramEntry 72 }

inputHDMIEDIDAcceptAC3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select if EDID should signal support for AC3 encoded audio."
    ::= { paramEntry 73 }

inputHDMIEDIDAcceptDDPlus OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select if EDID should signal support for DDP (E-AC3) encoded audio."
    ::= { paramEntry 74 }

inputAudioAnalogFSLevelUser OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Full-Scale level for analog audio output if User is selected."
    ::= { paramEntry 75 }

outputSDIVideoResolution OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoResolution
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "While, by default, the SDI output format is automatically derived from the HDMI input format, this automatic selection can be influenced with this parameter. It limits the SDI output resolution to one specific video format.<br>NOTE that the image content will NOT be zoomed or rescaled if this setting forces the SDI output into a format that does not match the resolution of the HDMI input. In this case the adaption of the resolution will be achieved by adding black content resp. by cropping the center part of the image content."
    ::= { paramEntry 76 }

outputSDIVideoColorRange OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoColorRange
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set color range of SDI output."
    ::= { paramEntry 77 }

outputSDIVideoHeadroomClipping OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable/disable SDI Headroom Clipping.<br>Specify if code values of the extended code range (black and white headroom, beyond the <i>narrow</i> SMPTE range) shall be passed or clipped. <br>NOTE that parameter <i>SDI Color Range</i> can be used to re-scale values instead of clipping them."
    ::= { paramEntry 78 }

outputSDI3GFormat OBJECT-TYPE
    SYNTAX TypeOutputSDI3GFormatStatus
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set 3G Format of SDI output."
    ::= { paramEntry 79 }

outputSDIMetaVPIDEOTF OBJECT-TYPE
    SYNTAX TypeOutputSDIMetaVPIDEOTF
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set EOTF flags in VPID of SDI output.<br>NOTE: HDR EOTFs are not available in SD or 720p VPIDs."
    ::= { paramEntry 80 }

outputSDIMetaVPIDColorimetry OBJECT-TYPE
    SYNTAX TypeOutputSDIMetaVPIDColorimetry
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Colorimetry flags in VPID of SDI output.<br>NOTE: BT.2020 Colorimetry is not available in SD or 720p VPIDs."
    ::= { paramEntry 81 }

outputSDIMetaAFD OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert AFD into SDI output."
    ::= { paramEntry 82 }

outputSDIAudioChannelAssignment OBJECT-TYPE
    SYNTAX TypeOutputSDIAudioChannelAssignment
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Switch between different allocations of audio channels.<br>By default, all audio channels (1 through 8) are mapped <b>1:1</b> between SDI and HDMI. If set to <b>convert</b>, channels 3 and 4 are swapped against each other, resulting in a conversion between the allocation according to SMPTE320M (3=Center /4=LFE) and CEA-861 (3=LFE / 4=FrontCenter)."
    ::= { paramEntry 83 }

outputSDIAudioEmbedInto3GLevelB OBJECT-TYPE
    SYNTAX TypeOutputSDIAudioEmbedInto3GLevelB
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select video stream to use for embedding<br> (when output is 3G-SDI LevelB: i.e. two HD-SDI streams multiplexed)."
    ::= { paramEntry 84 }

outputSDIRefSource OBJECT-TYPE
    SYNTAX TypeOutputSDIRefSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Reference Source."
    ::= { paramEntry 85 }

outputSDIDelayMode OBJECT-TYPE
    SYNTAX TypeOutputSDIDelayMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select delay mode of SDI output."
    ::= { paramEntry 86 }

outputSDIDelayFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in frames. Combine with Output/SDI/Delay/Lines and Output/SDI/Delay/Pixel for total delay"
    ::= { paramEntry 87 }

outputSDIDelayLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in lines. Combine with Output/SDI/Delay/Frames and Output/SDI/Delay/Pixel for total delay."
    ::= { paramEntry 88 }

outputSDIDelayPixels OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in pixels. Combine with Output/SDI/Delay/Frames and Output/SDI/Delay/Lines for total delay."
    ::= { paramEntry 89 }

outputSDIDelayMsec OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Total SDI output delay in milliseconds."
    ::= { paramEntry 90 }

inputAudioDelayMs OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set delay for digital/analog audio input.<br>NOTE: negative audio delay requires sufficient output delay (see <i>Output/SDI/Delay/*</i> Params) or will be clipped."
    ::= { paramEntry 91 }

inputHDMIAudioDelayMs OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set delay for HDMI audio input.<br>NOTE: negative audio delay requires sufficient output delay (see <i>Output/SDI/Delay/*</i> Params) or will be clipped."
    ::= { paramEntry 92 }

temperature OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION ""
    ::= { paramEntry 93 }

factoryCoastAdjust OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Adjustment value for device coast mode (freerun)"
    ::= { paramEntry 94 }

factoryFSLevelLeft OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Adjust audio gain value on left audio input"
    ::= { paramEntry 95 }

factoryFSLevelRight OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Adjust audio gain value on right audio input"
    ::= { paramEntry 96 }

eventHDMIInputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: HDMI Input No Input"
    ::= { paramEntry 97 }

eventAudioInputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input No Input"
    ::= { paramEntry 98 }

eventHDMIInputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: HDMI Input No Input"
    ::= { paramEntry 99 }

eventAudioInputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input No Input"
    ::= { paramEntry 100 }

inputHDMIAudioChannels OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the number of audio channels present in HDMI input."
    ::= { paramEntry 101 }

outputSDIOpticalSFPModulePartNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of used SFP Module"
    ::= { paramEntry 102 }

outputSDIOpticalSFPModuleType OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the type of detected SFP Module. The SFP part number will be displayed if SFP Module is unknown."
    ::= { paramEntry 103 }

outputSDIVideoInputLossReactionSwitchPosition OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoInputLossReactionSwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Select behaviour in case of input loss."
    ::= { paramEntry 104 }

outputSDIVideoInputLossContentSwitchPosition OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoIfNoInput2SwitchPosition
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Select behaviour in case of input loss. Only active if DIP5 is selected in DIP4."
    ::= { paramEntry 105 }

outputSDIVideoInputLossReaction OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoInputLossReactionSwitchPosition
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select behaviour in case of input loss."
    ::= { paramEntry 106 }

outputSDIVideoInputLossContent OBJECT-TYPE
    SYNTAX TypeOutputSDIVideoIfNoInput2SwitchPosition
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select behaviour in case of input loss. Only active if DIP5 is selected in DIP4."
    ::= { paramEntry 107 }

inputAudioLeftPlugged OBJECT-TYPE
    SYNTAX TypeInputAudioLeftPlugged
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows if left audio input is plugged in."
    ::= { paramEntry 108 }

inputAudioRightPlugged OBJECT-TYPE
    SYNTAX TypeInputAudioLeftPlugged
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows if right audio input is plugged in."
    ::= { paramEntry 109 }

inputAudioLeftStatus OBJECT-TYPE
    SYNTAX TypeInputAudioLeftStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of left audio input."
    ::= { paramEntry 110 }

inputAudioRightStatus OBJECT-TYPE
    SYNTAX TypeInputAudioLeftStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of right audio input."
    ::= { paramEntry 111 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of CHD1412 parameters"
    ::= { sw1165 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of CHD1412 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    locate OnOffValue,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    inputAudioLedPresentColor TypeInputAudioLedPresentColor,
    inputAudioLedPresentColorRGB TypeInputAudioLedPresentColorRGB,
    eventReferenceNoInput OnOffValue,
    eventAESInputNoInput OnOffValue,
    eventHighTemperature OnOffValue,
    eventFanFailure OnOffValue,
    eventReferenceNoInputSNMP TypeEventReferenceNoInputSNMP,
    eventAESInputNoInputSNMP TypeEventReferenceNoInputSNMP,
    eventHighTemperatureSNMP TypeEventReferenceNoInputSNMP,
    eventFanFailureSNMP TypeEventReferenceNoInputSNMP,
    inputHDMIVideoStandard TypeInputHDMIVideoStandard,
    inputHDMIVideoBitDepthStatus TypeInputHDMIVideoBitDepthStatus,
    inputHDMIVideoColorimetryStatus TypeInputHDMIVideoColorimetryStatus,
    inputHDMIVideoColorRangeStatus TypeInputHDMIVideoColorRangeStatus,
    inputHDMIVideoColorSpaceStatus TypeInputHDMIVideoColorSpaceStatus,
    inputHDMIVideoDCIFormatStatus OnOffValue,
    inputHDMIVideoEOTFStatus TypeInputHDMIVideoEOTFStatus,
    inputHDMIVideoFrameRate Integer32,
    inputHDMIVideoScanFormat TypeInputHDMIVideoScanFormat,
    inputHDMIVideoFrameWidth Integer32,
    inputHDMIVideoFrameHeight Integer32,
    inputHDMIVideoResolution DisplayString,
    inputHDMIAudioType TypeInputHDMIAudioType,
    inputHDMIMode TypeInputHDMIMode,
    inputHDMIHDCPStatus TypeInputHDMIHDCPStatus,
    inputRefStandard TypeInputRefStandard,
    inputAudioLeft TypeInputAudioLeft,
    inputAudioRight TypeInputAudioLeft,
    outputSDIVideoStandard TypeOutputSDIVideoStandard,
    outputSDI3GFormatStatus TypeOutputSDI3GFormatStatus,
    outputSDIVideoColorRangeStatus TypeOutputSDIVideoColorRangeStatus,
    outputSDIVideoDCIFormatStatus OnOffValue,
    outputSDIRefSourceStatus TypeOutputSDIRefSourceStatus,
    outputSDIRefLockStatus TypeOutputSDIRefLockStatus,
    outputSDIVideoShowHDCPStatusSwitchPosition TypeOutputSDIVideoShowHDCPStatusSwitchPosition,
    inputRefForceLockSwitchPosition TypeOutputSDIVideoShowHDCPStatusSwitchPosition,
    outputSDIVideoColorBarSwitchPosition TypeOutputSDIVideoShowHDCPStatusSwitchPosition,
    outputSDIVideoIfNoInput1SwitchPosition TypeOutputSDIVideoIfNoInput1SwitchPosition,
    outputSDIVideoIfNoInput2SwitchPosition TypeOutputSDIVideoIfNoInput2SwitchPosition,
    inputAudioSignalTypeSwitchPosition TypeInputAudioSignalTypeSwitchPosition,
    outputSDIAudioCopySwitchPosition TypeOutputSDIVideoShowHDCPStatusSwitchPosition,
    dip1UnusedSwitchPosition TypeDip1UnusedSwitchPosition,
    outputSDIVideoShowHDCPStatus TypeOutputSDIVideoShowHDCPStatusSwitchPosition,
    inputRefForceLock TypeOutputSDIVideoShowHDCPStatusSwitchPosition,
    outputSDIVideoColorBar TypeOutputSDIVideoShowHDCPStatusSwitchPosition,
    outputSDIVideoIfNoInput1 TypeOutputSDIVideoIfNoInput1SwitchPosition,
    outputSDIVideoIfNoInput2 TypeOutputSDIVideoIfNoInput2SwitchPosition,
    inputAudioSignalType TypeInputAudioSignalTypeSwitchPosition,
    outputSDIAudioCopy TypeOutputSDIVideoShowHDCPStatusSwitchPosition,
    dip1Unused TypeDip1UnusedSwitchPosition,
    inputAudioAnalogFSLevelSwitchPosition TypeInputAudioAnalogFSLevelSwitchPosition,
    inputAudioEmbedSelectSwitchPosition TypeInputAudioEmbedSelectSwitchPosition,
    inputAudioAnalogFSLevel TypeInputAudioAnalogFSLevelSwitchPosition,
    inputAudioEmbedSelect TypeInputAudioEmbedSelectSwitchPosition,
    inputHDMIVideoColorRange TypeInputHDMIVideoColorRange,
    inputHDMIEDIDPreferredStandard TypeInputHDMIEDIDPreferredStandard,
    inputHDMIEDIDLimitVideoStandards TypeInputHDMIEDIDLimitVideoStandards,
    inputHDMIEDIDAcceptBT2020 OnOffValue,
    inputHDMIEDIDAcceptHDR OnOffValue,
    inputHDMIEDIDAcceptAC3 OnOffValue,
    inputHDMIEDIDAcceptDDPlus OnOffValue,
    inputAudioAnalogFSLevelUser FixedPointValue1,
    outputSDIVideoResolution TypeOutputSDIVideoResolution,
    outputSDIVideoColorRange TypeOutputSDIVideoColorRange,
    outputSDIVideoHeadroomClipping OnOffValue,
    outputSDI3GFormat TypeOutputSDI3GFormatStatus,
    outputSDIMetaVPIDEOTF TypeOutputSDIMetaVPIDEOTF,
    outputSDIMetaVPIDColorimetry TypeOutputSDIMetaVPIDColorimetry,
    outputSDIMetaAFD OnOffValue,
    outputSDIAudioChannelAssignment TypeOutputSDIAudioChannelAssignment,
    outputSDIAudioEmbedInto3GLevelB TypeOutputSDIAudioEmbedInto3GLevelB,
    outputSDIRefSource TypeOutputSDIRefSource,
    outputSDIDelayMode TypeOutputSDIDelayMode,
    outputSDIDelayFrames Integer32,
    outputSDIDelayLines Integer32,
    outputSDIDelayPixels Integer32,
    outputSDIDelayMsec FixedPointValue3,
    inputAudioDelayMs FixedPointValue2,
    inputHDMIAudioDelayMs FixedPointValue2,
    temperature Integer32,
    factoryCoastAdjust Integer32,
    factoryFSLevelLeft Integer32,
    factoryFSLevelRight Integer32,
    eventHDMIInputNoInput OnOffValue,
    eventAudioInputNoInput OnOffValue,
    eventHDMIInputNoInputSNMP TypeEventReferenceNoInputSNMP,
    eventAudioInputNoInputSNMP TypeEventReferenceNoInputSNMP,
    inputHDMIAudioChannels Integer32,
    outputSDIOpticalSFPModulePartNumber DisplayString,
    outputSDIOpticalSFPModuleType DisplayString,
    outputSDIVideoInputLossReactionSwitchPosition TypeOutputSDIVideoInputLossReactionSwitchPosition,
    outputSDIVideoInputLossContentSwitchPosition TypeOutputSDIVideoIfNoInput2SwitchPosition,
    outputSDIVideoInputLossReaction TypeOutputSDIVideoInputLossReactionSwitchPosition,
    outputSDIVideoInputLossContent TypeOutputSDIVideoIfNoInput2SwitchPosition,
    inputAudioLeftPlugged TypeInputAudioLeftPlugged,
    inputAudioRightPlugged TypeInputAudioLeftPlugged,
    inputAudioLeftStatus TypeInputAudioLeftStatus,
    inputAudioRightStatus TypeInputAudioLeftStatus }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of CHD1412"
    ::= { sw1165 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        locate,
        statusColor,
        statusColorRGB,
        statusText,
        inputAudioLedPresentColor,
        inputAudioLedPresentColorRGB,
        eventReferenceNoInput,
        eventAESInputNoInput,
        eventHighTemperature,
        eventFanFailure,
        eventReferenceNoInputSNMP,
        eventAESInputNoInputSNMP,
        eventHighTemperatureSNMP,
        eventFanFailureSNMP,
        inputHDMIVideoStandard,
        inputHDMIVideoBitDepthStatus,
        inputHDMIVideoColorimetryStatus,
        inputHDMIVideoColorRangeStatus,
        inputHDMIVideoColorSpaceStatus,
        inputHDMIVideoDCIFormatStatus,
        inputHDMIVideoEOTFStatus,
        inputHDMIVideoFrameRate,
        inputHDMIVideoScanFormat,
        inputHDMIVideoFrameWidth,
        inputHDMIVideoFrameHeight,
        inputHDMIVideoResolution,
        inputHDMIAudioType,
        inputHDMIMode,
        inputHDMIHDCPStatus,
        inputRefStandard,
        inputAudioLeft,
        inputAudioRight,
        outputSDIVideoStandard,
        outputSDI3GFormatStatus,
        outputSDIVideoColorRangeStatus,
        outputSDIVideoDCIFormatStatus,
        outputSDIRefSourceStatus,
        outputSDIRefLockStatus,
        outputSDIVideoShowHDCPStatusSwitchPosition,
        inputRefForceLockSwitchPosition,
        outputSDIVideoColorBarSwitchPosition,
        outputSDIVideoIfNoInput1SwitchPosition,
        outputSDIVideoIfNoInput2SwitchPosition,
        inputAudioSignalTypeSwitchPosition,
        outputSDIAudioCopySwitchPosition,
        dip1UnusedSwitchPosition,
        outputSDIVideoShowHDCPStatus,
        inputRefForceLock,
        outputSDIVideoColorBar,
        outputSDIVideoIfNoInput1,
        outputSDIVideoIfNoInput2,
        inputAudioSignalType,
        outputSDIAudioCopy,
        dip1Unused,
        inputAudioAnalogFSLevelSwitchPosition,
        inputAudioEmbedSelectSwitchPosition,
        inputAudioAnalogFSLevel,
        inputAudioEmbedSelect,
        inputHDMIVideoColorRange,
        inputHDMIEDIDPreferredStandard,
        inputHDMIEDIDLimitVideoStandards,
        inputHDMIEDIDAcceptBT2020,
        inputHDMIEDIDAcceptHDR,
        inputHDMIEDIDAcceptAC3,
        inputHDMIEDIDAcceptDDPlus,
        inputAudioAnalogFSLevelUser,
        outputSDIVideoResolution,
        outputSDIVideoColorRange,
        outputSDIVideoHeadroomClipping,
        outputSDI3GFormat,
        outputSDIMetaVPIDEOTF,
        outputSDIMetaVPIDColorimetry,
        outputSDIMetaAFD,
        outputSDIAudioChannelAssignment,
        outputSDIAudioEmbedInto3GLevelB,
        outputSDIRefSource,
        outputSDIDelayMode,
        outputSDIDelayFrames,
        outputSDIDelayLines,
        outputSDIDelayPixels,
        outputSDIDelayMsec,
        inputAudioDelayMs,
        inputHDMIAudioDelayMs,
        temperature,
        factoryCoastAdjust,
        factoryFSLevelLeft,
        factoryFSLevelRight,
        eventHDMIInputNoInput,
        eventAudioInputNoInput,
        eventHDMIInputNoInputSNMP,
        eventAudioInputNoInputSNMP,
        inputHDMIAudioChannels,
        outputSDIOpticalSFPModulePartNumber,
        outputSDIOpticalSFPModuleType,
        outputSDIVideoInputLossReactionSwitchPosition,
        outputSDIVideoInputLossContentSwitchPosition,
        outputSDIVideoInputLossReaction,
        outputSDIVideoInputLossContent,
        inputAudioLeftPlugged,
        inputAudioRightPlugged,
        inputAudioLeftStatus,
        inputAudioRightStatus }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END