-- Machine generated MIB file, do not edit!
--
-- MIB file for CHD1802-1, type code 42.12, software label 583
-- Generated on Friday, 19-Feb-21 09:50:06 UTC
-- CVS $Id: CHD1802-1_4212_sw583.mib,v 1.1 2021/02/19 09:50:08 til Exp $
--
-- Copyright 2003-2021 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs contain
-- unpublished proprietary information written by LYNX Technik AG and
-- are protected by Federal copyright law. They may not be disclosed
-- to third parties or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--
CHD1802-1-4212-sw583-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
mib-modules, products,
FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;
chd1802-1-4212-sw583 MODULE-IDENTITY
LAST-UPDATED "202102190950Z"
ORGANIZATION "LYNX Technik AG"
CONTACT-INFO "LYNX Technik AG
Brunnenweg 3
64331 Weiterstadt
http://www.lynx-technik.com
mailto:support@lynx-technik.com"
DESCRIPTION "MIB module definition for CHD1802-1, type code 42.12, software label 583"
REVISION "202102190950Z"
DESCRIPTION "Generated by LYNX Asset Database"
::= { mib-modules 16914583 }
chd1802-1-4212 OBJECT-IDENTITY
STATUS current
DESCRIPTION "LYNX device type CHD1802-1"
::= { products 16914 }
sw583 OBJECT-IDENTITY
STATUS current
DESCRIPTION "Software label 583"
::= { chd1802-1-4212 583 }
-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
press(0)
}
TypeStatusColor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
red(1),
green(2),
yellow(3)
}
TypeStatusColorRGB ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n000000(0),
ff0000(1),
n00ff00(2),
ffff00(3)
}
TypeAudioBitDepth ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n20Bit(0),
n24Bit(1)
}
TypeOutputResolution ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
automatic(0),
sdtv(1),
n720p(2),
n1080i(3),
n1080p(4)
}
TypeReferenceLockForceFreeRun ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
on(1),
offX(2)
}
TypeMetaAFDEnable ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
on(1),
auto(2)
}
TypeHDMIAudioStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
present(1),
presentX(2)
}
TypeInputMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
dvi(0),
hdmi(1)
}
TypeHDMIAudioType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
notEmbedded(0),
stereo(1),
surround(2)
}
TypeHDMIColorspace ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
rGBLimited(0),
rGBFull(1),
yUV601(2),
yUV709(3),
xVYCC601(4),
xVYCC709(5),
yUV601Full(6),
yUV709Full(7),
sYCC601(8),
adobeYCC601(9),
adobeRGB(10)
}
TypeHDMIBitDepth ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n8Bit(0),
n10Bit(1),
n12Bit(2),
n16Bit(3)
}
TypeSDIOutputStandard ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
invalid(1),
n525(2),
n625(3),
n720p60(4),
n720p5994(5),
n720p50(6),
n720p30(7),
n720p2997(8),
n720p25(9),
n720p24(10),
n720p2398(11),
n1080i60(12),
n1080i5994(13),
n1080i50(14),
n1080p60(15),
n1080p5994(16),
n1080p50(17),
n1080p30(18),
n1080p2997(19),
n1080p25(20),
n1080p24(21),
n1080p2398(22),
n1080psF30(23),
n1080psF2997(24),
n1080psF25(25),
n1080psF24(26),
n1080psF2398(27),
n2KP60(28),
n2KP59(29),
n2KP50(30),
n2KP48(31),
n2KP47(32),
n2KP30(33),
n2KP29(34),
n2KP25(35),
n2KP24(36),
n2KP23(37),
n2KPsF30(38),
n2KPsF29(39),
n2KPsF25(40),
n2KPsF24(41),
n2KPsF23(42)
}
TypeHDMIInStd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
missingX(1),
n480i59(2),
n576i50(3),
n480p59(4),
n576p50(5),
n720p23(6),
n720p24(7),
n720p25(8),
n720p29(9),
n720p30(10),
n720p50(11),
n720p59(12),
n720p60(13),
n1080i50(14),
n1080i59(15),
n1080i60(16),
n1080p23(17),
n1080p24(18),
n1080p25(19),
n1080p29(20),
n1080p30(21),
n1080p50(22),
n1080p59(23),
n1080p60(24),
n640x480(25),
n800x600(26),
n640x350(27),
n640x400(28),
n720x400(29),
n832x624(30),
n848x480(31),
n852x480(32),
n1024x576(33),
n1280x720(34),
n1024x768(35),
n1920x1080(36),
n1280x768(37),
n1152x864(38),
n1280x960(39),
n1280x1024(40),
n1365x1024(41),
n1600x1024(42),
n1680x1050(43),
n1152x870(44),
n1360x768(45),
n1400x788(46),
n1440x960(47),
n1400x1050(48),
n1920x1200(49),
n1600x1200(50),
n2KP60(51),
n2KP59(52),
n2KP50(53),
n2KP48(54),
n2KP47(55),
n2KP30(56),
n2KP29(57),
n2KP25(58),
n2KP24(59),
n2KP23(60),
n2KPsF30(61),
n2KPsF29(62),
n2KPsF25(63),
n2KPsF24(64),
n2KPsF23(65)
}
TypeSDIOutputColorRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
auto(0),
limited(1),
full(2)
}
TypeAudioChannelAssignment ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n11(0),
convert(1)
}
TypeLimitVideoStandardsList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
fullList(0),
limited(1)
}
TypeEmbed3GLevelBStreamSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
streamsAB(0),
streamAOnly(1),
streamBOnly(2)
}
TypeHDMISetRGBRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
auto(0),
rGBLimited(1),
rGBFull(2)
}
TypeMetaVPID3DMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
dualStream(0),
stereoscopic(1)
}
TypeSDIOut3GFormat ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
levelBDualLink(0),
levelBDualStream(1),
levelA(2)
}
TypeSDI3GTransport ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
levelA(0),
levelBDualLink(1)
}
-- Parameter definitions
typeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LYNX product type name"
::= { paramEntry 1 }
displayName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
::= { paramEntry 2 }
position OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
::= { paramEntry 3 }
uptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Connection time of the device to this UI (in seconds)"
::= { paramEntry 4 }
type OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device type code"
::= { paramEntry 5 }
version OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device version information"
::= { paramEntry 6 }
factoryReset OBJECT-TYPE
SYNTAX TypeFactoryReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
::= { paramEntry 7 }
locate OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
::= { paramEntry 8 }
statusColor OBJECT-TYPE
SYNTAX TypeStatusColor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
::= { paramEntry 9 }
statusColorRGB OBJECT-TYPE
SYNTAX TypeStatusColorRGB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
::= { paramEntry 10 }
acceptEncodedAudio OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Allow HDMI source to provide embedded audio content in encoded form
(AC3 or Dolby Digital Plus). This is achieved by adding an appropriate entry to the EDID table. If the parameter is set to FALSE (default) only PCM audio content is accepted per EDID information."
::= { paramEntry 13 }
audioBitDepth OBJECT-TYPE
SYNTAX TypeAudioBitDepth
MAX-ACCESS read-write
STATUS current
DESCRIPTION "20/24Bit audio embedding for SDTV"
::= { paramEntry 14 }
outputResolution OBJECT-TYPE
SYNTAX TypeOutputResolution
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set SDI Output Resolution.
While, by default, the SDI output format is automatically derived from the HDMI input format, this automatic selection can be influenced with this parameter. It limits the SDI output resolution to one specific video format.
NOTE that the image content will NOT be zoomed or rescaled if this setting forces the SDI output into a format that does not match the resolution of the HDMI input. In this case the adaption of the resolution will be achieved by adding black content resp. by cropping the center part of the image content."
::= { paramEntry 15 }
referenceLockForceFreeRun OBJECT-TYPE
SYNTAX TypeReferenceLockForceFreeRun
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Forces the device into a freerun mode instead of locking it to the HDMI signal.
The HDMI signal can be jittery in which case not locking on it and running in free run instead can be desirable."
::= { paramEntry 16 }
metaAFDEnable OBJECT-TYPE
SYNTAX TypeMetaAFDEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Embed AFD (Active Format Description) code into SDI output."
::= { paramEntry 17 }
metaVIEnable OBJECT-TYPE
SYNTAX TypeMetaAFDEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Embed VI (Video Index) code into SDI output."
::= { paramEntry 18 }
metaWSSEnable OBJECT-TYPE
SYNTAX TypeMetaAFDEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Embed WSS (Wide Screen Signalling) code into SDI output."
::= { paramEntry 19 }
hDMIAudioStatus OBJECT-TYPE
SYNTAX TypeHDMIAudioStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Audio Status In"
::= { paramEntry 20 }
inputMode OBJECT-TYPE
SYNTAX TypeInputMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Input Mode"
::= { paramEntry 21 }
hDMIAudioType OBJECT-TYPE
SYNTAX TypeHDMIAudioType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Audio Type"
::= { paramEntry 22 }
hDMIColorspace OBJECT-TYPE
SYNTAX TypeHDMIColorspace
MAX-ACCESS read-only
STATUS current
DESCRIPTION "HDMI Colorspace"
::= { paramEntry 23 }
hDMIBitDepth OBJECT-TYPE
SYNTAX TypeHDMIBitDepth
MAX-ACCESS read-only
STATUS current
DESCRIPTION "HDMI Bitdepth"
::= { paramEntry 24 }
sDIOutputStandard OBJECT-TYPE
SYNTAX TypeSDIOutputStandard
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI output.
By default, this standard will be derived from the HDMI input format. This automatic selection can be influenced by the parameter SDIOutputResolution"
::= { paramEntry 25 }
hDMIInStd OBJECT-TYPE
SYNTAX TypeHDMIInStd
MAX-ACCESS read-only
STATUS current
DESCRIPTION "HDMI Input Standard"
::= { paramEntry 26 }
sDIOutputColorRange OBJECT-TYPE
SYNTAX TypeSDIOutputColorRange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the range of output code values.
Default is automatic which means same as input. This can be modified to force the signal into the Full respective Limited (SMPTE) output range. In this case, the signal will be scaled as appropriate.
NOTE: this is different from parameter SDI Headroom Clipping, which will clip extended values to the limited range (instead of scaling them)."
::= { paramEntry 27 }
audioChannelAssignment OBJECT-TYPE
SYNTAX TypeAudioChannelAssignment
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Switch between different allocations of audio channels.
By default, all audio channels (1 through 8) are mapped 1:1 between SDI and HDMI. If set to convert, channels 3 and 4 are swapped against each other, resulting in a conversion between the allocation according to SMPTE320M (3=Center /4=LFE) and CEA-861 (3=LFE / 4=FrontCenter)."
::= { paramEntry 28 }
sFPModulePartNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the part number of used SFP Module"
::= { paramEntry 29 }
sFPModuleType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "displays the type of detected SFP-Module . The SFP part number will also be displayed if SFP-Module is unknown."
::= { paramEntry 30 }
limitVideoStandardsList OBJECT-TYPE
SYNTAX TypeLimitVideoStandardsList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Limit Video Standards.
By default, a very large variety of video standards and resolutions is supported on the HDMI input. This parameter lets you limit this list down to the SD-SDI (480p/i ; 575p/i) and HD-SDI formats (720p/50/59/60 ; 1080p/23/24/25/29/30 ; 1080i/50/59/60)"
::= { paramEntry 31 }
embed3GLevelBStreamSelect OBJECT-TYPE
SYNTAX TypeEmbed3GLevelBStreamSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select video stream to use for embedding
(when output is 3G-SDI LevelB: i.e. two HD-SDI streams multiplexed).By default, the identical audio content will be embedded into both streams (A and B) simultaneously. Alternatively, the audio content can be embedded into only one of them."
::= { paramEntry 32 }
sDIOutputClipping OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable SDI Headroom Clipping.
Specify if code values of the extended code range (black and white headroom, beyond the limited SMPTE range) shall be passed or clipped. By default, clipping is disabled (OFF).
NOTE that parameter SDI Color Range can be used to re-scale values instead of clipping them."
::= { paramEntry 33 }
hDMISetRGBRange OBJECT-TYPE
SYNTAX TypeHDMISetRGBRange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the range of RGB input values.
By default (auto), this information will be derived from the HDMI signal (AVI-Info frame). This automatic detection can be disabled and the input can be declared as RGB Full or RGB Limited range.
NOTE: This setting does not have any effect if input is not RGB."
::= { paramEntry 34 }
metaVPID3DMode OBJECT-TYPE
SYNTAX TypeMetaVPID3DMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the type of VPID (Video Payload Identification)
that will be used for 3D content. By default, such content will be marked as dual stream 3G-SDI (according to SMPTE 452-1). This behaviour can be modified so that such content will be marked as stereoscopic according to SMPTE 425-2:2012.
NOTE that some 3D SDI equipment does not recognize the stereoscopic VPID markup. Hence this ability to select."
::= { paramEntry 35 }
sDIOut3GFormat OBJECT-TYPE
SYNTAX TypeSDIOut3GFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION "3G Format of the SDI output signal"
::= { paramEntry 36 }
sDI3GTransport OBJECT-TYPE
SYNTAX TypeSDI3GTransport
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select the SDI 3G Transport Format"
::= { paramEntry 37 }
-- Parameter table
paramTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of CHD1802-1 parameters"
::= { sw583 1 }
paramEntry OBJECT-TYPE
SYNTAX ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row in the table of CHD1802-1 parameters"
INDEX { IMPLIED position }
::= { paramTable 1 }
ParamEntry ::= SEQUENCE {
typeName DisplayString,
displayName DisplayString,
position OCTET STRING,
uptime TimeTicks,
type DisplayString,
version DisplayString,
factoryReset TypeFactoryReset,
locate OnOffValue,
statusColor TypeStatusColor,
statusColorRGB TypeStatusColorRGB,
acceptEncodedAudio OnOffValue,
audioBitDepth TypeAudioBitDepth,
outputResolution TypeOutputResolution,
referenceLockForceFreeRun TypeReferenceLockForceFreeRun,
metaAFDEnable TypeMetaAFDEnable,
metaVIEnable TypeMetaAFDEnable,
metaWSSEnable TypeMetaAFDEnable,
hDMIAudioStatus TypeHDMIAudioStatus,
inputMode TypeInputMode,
hDMIAudioType TypeHDMIAudioType,
hDMIColorspace TypeHDMIColorspace,
hDMIBitDepth TypeHDMIBitDepth,
sDIOutputStandard TypeSDIOutputStandard,
hDMIInStd TypeHDMIInStd,
sDIOutputColorRange TypeSDIOutputColorRange,
audioChannelAssignment TypeAudioChannelAssignment,
sFPModulePartNumber DisplayString,
sFPModuleType DisplayString,
limitVideoStandardsList TypeLimitVideoStandardsList,
embed3GLevelBStreamSelect TypeEmbed3GLevelBStreamSelect,
sDIOutputClipping OnOffValue,
hDMISetRGBRange TypeHDMISetRGBRange,
metaVPID3DMode TypeMetaVPID3DMode,
sDIOut3GFormat TypeSDIOut3GFormat,
sDI3GTransport TypeSDI3GTransport }
-- Conformance statements
conformance OBJECT-IDENTITY
STATUS current
DESCRIPTION "Conformance declaration of CHD1802-1"
::= { sw583 2 }
paramGroup OBJECT-GROUP
OBJECTS {
typeName,
displayName,
position,
uptime,
type,
version,
factoryReset,
locate,
statusColor,
statusColorRGB,
acceptEncodedAudio,
audioBitDepth,
outputResolution,
referenceLockForceFreeRun,
metaAFDEnable,
metaVIEnable,
metaWSSEnable,
hDMIAudioStatus,
inputMode,
hDMIAudioType,
hDMIColorspace,
hDMIBitDepth,
sDIOutputStandard,
hDMIInStd,
sDIOutputColorRange,
audioChannelAssignment,
sFPModulePartNumber,
sFPModuleType,
limitVideoStandardsList,
embed3GLevelBStreamSelect,
sDIOutputClipping,
hDMISetRGBRange,
metaVPID3DMode,
sDIOut3GFormat,
sDI3GTransport }
STATUS current
DESCRIPTION "Conformance group containing all device parameters"
::= { conformance 1 }
paramCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance specification"
MODULE -- This module
MANDATORY-GROUPS { paramGroup }
::= { conformance 2 }
END