-- Machine generated MIB file, do not edit! -- -- MIB file for CHD1802-1, type code 42.12, software label 945 -- Generated on Tuesday, 28-Sep-21 10:29:51 UTC -- CVS $Id: CHD1802-1_4212_sw945.mib,v 1.1 2021/09/28 10:29:53 til Exp $ -- -- Copyright 2003-2021 by LYNX Technik AG -- -- These coded instructions, statements, and computer programs contain -- unpublished proprietary information written by LYNX Technik AG and -- are protected by Federal copyright law. They may not be disclosed -- to third parties or copied or duplicated in any form, in whole or -- in part, without the prior written consent of LYNX Technik AG. -- CHD1802-1-4212-sw945-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578 TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579 MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580 mib-modules, products, FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI; chd1802-1-4212-sw945 MODULE-IDENTITY LAST-UPDATED "202109281029Z" ORGANIZATION "LYNX Technik AG" CONTACT-INFO "LYNX Technik AG Brunnenweg 3 64331 Weiterstadt http://www.lynx-technik.com mailto:support@lynx-technik.com" DESCRIPTION "MIB module definition for CHD1802-1, type code 42.12, software label 945" REVISION "202109281029Z" DESCRIPTION "Generated by LYNX Asset Database" ::= { mib-modules 16914945 } chd1802-1-4212 OBJECT-IDENTITY STATUS current DESCRIPTION "LYNX device type CHD1802-1" ::= { products 16914 } sw945 OBJECT-IDENTITY STATUS current DESCRIPTION "Software label 945" ::= { chd1802-1-4212 945 } -- Type definitions TypeFactoryReset ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { press(0) } TypeStatusColor ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { off(0), red(1), green(2), yellow(3) } TypeStatusColorRGB ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n000000(0), ff0000(1), n00ff00(2), ffff00(3) } TypeAudioBitDepth ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n20Bit(0), n24Bit(1) } TypeOutputResolution ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { automatic(0), sdtv(1), n720p(2), n1080i(3), n1080p(4) } TypeReferenceLockForceFreeRun ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { off(0), on(1), offX(2) } TypeMetaAFDEnable ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { off(0), on(1), auto(2) } TypeHDMIAudioStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { missing(0), present(1), presentX(2) } TypeInputMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { dvi(0), hdmi(1) } TypeHDMIAudioType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { notEmbedded(0), stereo(1), surround(2) } TypeHDMIColorspace ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { rGBLimited(0), rGBFull(1), yUV601(2), yUV709(3), xVYCC601(4), xVYCC709(5), yUV601Full(6), yUV709Full(7), sYCC601(8), adobeYCC601(9), adobeRGB(10) } TypeHDMIBitDepth ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n8Bit(0), n10Bit(1), n12Bit(2), n16Bit(3) } TypeSDIOutputStandard ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { missing(0), invalid(1), n525(2), n625(3), n720p60(4), n720p5994(5), n720p50(6), n720p30(7), n720p2997(8), n720p25(9), n720p24(10), n720p2398(11), n1080i60(12), n1080i5994(13), n1080i50(14), n1080p60(15), n1080p5994(16), n1080p50(17), n1080p30(18), n1080p2997(19), n1080p25(20), n1080p24(21), n1080p2398(22), n1080psF30(23), n1080psF2997(24), n1080psF25(25), n1080psF24(26), n1080psF2398(27), n2KP60(28), n2KP59(29), n2KP50(30), n2KP48(31), n2KP47(32), n2KP30(33), n2KP29(34), n2KP25(35), n2KP24(36), n2KP23(37), n2KPsF30(38), n2KPsF29(39), n2KPsF25(40), n2KPsF24(41), n2KPsF23(42) } TypeHDMIInStd ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { missing(0), missingX(1), n480i59(2), n576i50(3), n480p59(4), n576p50(5), n720p23(6), n720p24(7), n720p25(8), n720p29(9), n720p30(10), n720p50(11), n720p59(12), n720p60(13), n1080i50(14), n1080i59(15), n1080i60(16), n1080p23(17), n1080p24(18), n1080p25(19), n1080p29(20), n1080p30(21), n1080p50(22), n1080p59(23), n1080p60(24), n640x480(25), n800x600(26), n640x350(27), n640x400(28), n720x400(29), n832x624(30), n848x480(31), n852x480(32), n1024x576(33), n1280x720(34), n1024x768(35), n1920x1080(36), n1280x768(37), n1152x864(38), n1280x960(39), n1280x1024(40), n1365x1024(41), n1600x1024(42), n1680x1050(43), n1152x870(44), n1360x768(45), n1400x788(46), n1440x960(47), n1400x1050(48), n1920x1200(49), n1600x1200(50), n2KP60(51), n2KP59(52), n2KP50(53), n2KP48(54), n2KP47(55), n2KP30(56), n2KP29(57), n2KP25(58), n2KP24(59), n2KP23(60), n2KPsF30(61), n2KPsF29(62), n2KPsF25(63), n2KPsF24(64), n2KPsF23(65) } TypeSDIOutputColorRange ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { auto(0), limited(1), full(2) } TypeAudioChannelAssignment ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n11(0), convert(1) } TypeLimitVideoStandardsList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { fullList(0), limited(1) } TypeEmbed3GLevelBStreamSelect ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { streamsAB(0), streamAOnly(1), streamBOnly(2) } TypeHDMISetRGBRange ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { auto(0), rGBLimited(1), rGBFull(2) } TypeMetaVPID3DMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { dualStream(0), stereoscopic(1) } TypeSDIOut3GFormat ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { levelBDualLink(0), levelBDualStream(1), levelA(2) } TypeSDI3GTransport ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { levelA(0), levelBDualLink(1) } TypeSubsampleFilter ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { on(0), off(1) } -- Parameter definitions typeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "LYNX product type name" ::= { paramEntry 1 } displayName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller" ::= { paramEntry 2 } position OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)" ::= { paramEntry 3 } uptime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Connection time of the device to this UI (in seconds)" ::= { paramEntry 4 } type OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device type code" ::= { paramEntry 5 } version OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device version information" ::= { paramEntry 6 } factoryReset OBJECT-TYPE SYNTAX TypeFactoryReset MAX-ACCESS read-write STATUS current DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)" ::= { paramEntry 7 } locate OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF" ::= { paramEntry 8 } statusColor OBJECT-TYPE SYNTAX TypeStatusColor MAX-ACCESS read-only STATUS current DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)" ::= { paramEntry 9 } statusColorRGB OBJECT-TYPE SYNTAX TypeStatusColorRGB MAX-ACCESS read-only STATUS current DESCRIPTION "The current color of the Devices Master LED as #RRGGBB" ::= { paramEntry 10 } acceptEncodedAudio OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allow HDMI source to provide embedded audio content in encoded form
(AC3 or Dolby Digital Plus). This is achieved by adding an appropriate entry to the EDID table. If the parameter is set to FALSE (default) only PCM audio content is accepted per EDID information." ::= { paramEntry 13 } audioBitDepth OBJECT-TYPE SYNTAX TypeAudioBitDepth MAX-ACCESS read-write STATUS current DESCRIPTION "20/24Bit audio embedding for SDTV" ::= { paramEntry 14 } outputResolution OBJECT-TYPE SYNTAX TypeOutputResolution MAX-ACCESS read-write STATUS current DESCRIPTION "Set SDI Output Resolution.
While, by default, the SDI output format is automatically derived from the HDMI input format, this automatic selection can be influenced with this parameter. It limits the SDI output resolution to one specific video format.
NOTE that the image content will NOT be zoomed or rescaled if this setting forces the SDI output into a format that does not match the resolution of the HDMI input. In this case the adaption of the resolution will be achieved by adding black content resp. by cropping the center part of the image content." ::= { paramEntry 15 } referenceLockForceFreeRun OBJECT-TYPE SYNTAX TypeReferenceLockForceFreeRun MAX-ACCESS read-write STATUS current DESCRIPTION "Forces the device into a freerun mode instead of locking it to the HDMI signal.
The HDMI signal can be jittery in which case not locking on it and running in free run instead can be desirable." ::= { paramEntry 16 } metaAFDEnable OBJECT-TYPE SYNTAX TypeMetaAFDEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Embed AFD (Active Format Description) code into SDI output." ::= { paramEntry 17 } metaVIEnable OBJECT-TYPE SYNTAX TypeMetaAFDEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Embed VI (Video Index) code into SDI output." ::= { paramEntry 18 } metaWSSEnable OBJECT-TYPE SYNTAX TypeMetaAFDEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Embed WSS (Wide Screen Signalling) code into SDI output." ::= { paramEntry 19 } hDMIAudioStatus OBJECT-TYPE SYNTAX TypeHDMIAudioStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Audio Status In" ::= { paramEntry 20 } inputMode OBJECT-TYPE SYNTAX TypeInputMode MAX-ACCESS read-only STATUS current DESCRIPTION "Input Mode" ::= { paramEntry 21 } hDMIAudioType OBJECT-TYPE SYNTAX TypeHDMIAudioType MAX-ACCESS read-only STATUS current DESCRIPTION "Audio Type" ::= { paramEntry 22 } hDMIColorspace OBJECT-TYPE SYNTAX TypeHDMIColorspace MAX-ACCESS read-only STATUS current DESCRIPTION "HDMI Colorspace" ::= { paramEntry 23 } hDMIBitDepth OBJECT-TYPE SYNTAX TypeHDMIBitDepth MAX-ACCESS read-only STATUS current DESCRIPTION "HDMI Bitdepth" ::= { paramEntry 24 } sDIOutputStandard OBJECT-TYPE SYNTAX TypeSDIOutputStandard MAX-ACCESS read-only STATUS current DESCRIPTION "Video standard of SDI output.
By default, this standard will be derived from the HDMI input format. This automatic selection can be influenced by the parameter SDIOutputResolution" ::= { paramEntry 25 } hDMIInStd OBJECT-TYPE SYNTAX TypeHDMIInStd MAX-ACCESS read-only STATUS current DESCRIPTION "HDMI Input Standard" ::= { paramEntry 26 } sDIOutputColorRange OBJECT-TYPE SYNTAX TypeSDIOutputColorRange MAX-ACCESS read-write STATUS current DESCRIPTION "Set the range of output code values.
Default is automatic which means same as input. This can be modified to force the signal into the Full respective Limited (SMPTE) output range. In this case, the signal will be scaled as appropriate.
NOTE: this is different from parameter SDI Headroom Clipping, which will clip extended values to the limited range (instead of scaling them)." ::= { paramEntry 27 } audioChannelAssignment OBJECT-TYPE SYNTAX TypeAudioChannelAssignment MAX-ACCESS read-write STATUS current DESCRIPTION "Switch between different allocations of audio channels.
By default, all audio channels (1 through 8) are mapped 1:1 between SDI and HDMI. If set to convert, channels 3 and 4 are swapped against each other, resulting in a conversion between the allocation according to SMPTE320M (3=Center /4=LFE) and CEA-861 (3=LFE / 4=FrontCenter)." ::= { paramEntry 28 } sFPModulePartNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the part number of used SFP Module" ::= { paramEntry 29 } sFPModuleType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the type of detected SFP-Module . The SFP part number will be displayed if SFP Module is unknown." ::= { paramEntry 30 } limitVideoStandardsList OBJECT-TYPE SYNTAX TypeLimitVideoStandardsList MAX-ACCESS read-write STATUS current DESCRIPTION "Limit Video Standards.
By default, a very large variety of video standards and resolutions is supported on the HDMI input. This parameter lets you limit this list down to the SD-SDI (480p/i ; 575p/i) and HD-SDI formats (720p/50/59/60 ; 1080p/23/24/25/29/30 ; 1080i/50/59/60)" ::= { paramEntry 31 } embed3GLevelBStreamSelect OBJECT-TYPE SYNTAX TypeEmbed3GLevelBStreamSelect MAX-ACCESS read-write STATUS current DESCRIPTION "Select video stream to use for embedding
(when output is 3G-SDI LevelB: i.e. two HD-SDI streams multiplexed).By default, the identical audio content will be embedded into both streams (A and B) simultaneously. Alternatively, the audio content can be embedded into only one of them." ::= { paramEntry 32 } sDIOutputClipping OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable SDI Headroom Clipping.
Specify if code values of the extended code range (black and white headroom, beyond the limited SMPTE range) shall be passed or clipped. By default, clipping is disabled (OFF).
NOTE that parameter SDI Color Range can be used to re-scale values instead of clipping them." ::= { paramEntry 33 } hDMISetRGBRange OBJECT-TYPE SYNTAX TypeHDMISetRGBRange MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the range of RGB input values.
By default (auto), this information will be derived from the HDMI signal (AVI-Info frame). This automatic detection can be disabled and the input can be declared as RGB Full or RGB Limited range.
NOTE: This setting does not have any effect if input is not RGB." ::= { paramEntry 34 } metaVPID3DMode OBJECT-TYPE SYNTAX TypeMetaVPID3DMode MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the type of VPID (Video Payload Identification)
that will be used for 3D content. By default, such content will be marked as dual stream 3G-SDI (according to SMPTE 452-1). This behaviour can be modified so that such content will be marked as stereoscopic according to SMPTE 425-2:2012.
NOTE that some 3D SDI equipment does not recognize the stereoscopic VPID markup. Hence this ability to select." ::= { paramEntry 35 } sDIOut3GFormat OBJECT-TYPE SYNTAX TypeSDIOut3GFormat MAX-ACCESS read-only STATUS current DESCRIPTION "3G Format of the SDI output signal" ::= { paramEntry 36 } sDI3GTransport OBJECT-TYPE SYNTAX TypeSDI3GTransport MAX-ACCESS read-write STATUS current DESCRIPTION "Select the SDI 3G Transport Format" ::= { paramEntry 37 } subsampleFilter OBJECT-TYPE SYNTAX TypeSubsampleFilter MAX-ACCESS read-write STATUS current DESCRIPTION "Select if image should be filtered if subsampled." ::= { paramEntry 38 } -- Parameter table paramTable OBJECT-TYPE SYNTAX SEQUENCE OF ParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of CHD1802-1 parameters" ::= { sw945 1 } paramEntry OBJECT-TYPE SYNTAX ParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the table of CHD1802-1 parameters" INDEX { IMPLIED position } ::= { paramTable 1 } ParamEntry ::= SEQUENCE { typeName DisplayString, displayName DisplayString, position OCTET STRING, uptime TimeTicks, type DisplayString, version DisplayString, factoryReset TypeFactoryReset, locate OnOffValue, statusColor TypeStatusColor, statusColorRGB TypeStatusColorRGB, acceptEncodedAudio OnOffValue, audioBitDepth TypeAudioBitDepth, outputResolution TypeOutputResolution, referenceLockForceFreeRun TypeReferenceLockForceFreeRun, metaAFDEnable TypeMetaAFDEnable, metaVIEnable TypeMetaAFDEnable, metaWSSEnable TypeMetaAFDEnable, hDMIAudioStatus TypeHDMIAudioStatus, inputMode TypeInputMode, hDMIAudioType TypeHDMIAudioType, hDMIColorspace TypeHDMIColorspace, hDMIBitDepth TypeHDMIBitDepth, sDIOutputStandard TypeSDIOutputStandard, hDMIInStd TypeHDMIInStd, sDIOutputColorRange TypeSDIOutputColorRange, audioChannelAssignment TypeAudioChannelAssignment, sFPModulePartNumber DisplayString, sFPModuleType DisplayString, limitVideoStandardsList TypeLimitVideoStandardsList, embed3GLevelBStreamSelect TypeEmbed3GLevelBStreamSelect, sDIOutputClipping OnOffValue, hDMISetRGBRange TypeHDMISetRGBRange, metaVPID3DMode TypeMetaVPID3DMode, sDIOut3GFormat TypeSDIOut3GFormat, sDI3GTransport TypeSDI3GTransport, subsampleFilter TypeSubsampleFilter } -- Conformance statements conformance OBJECT-IDENTITY STATUS current DESCRIPTION "Conformance declaration of CHD1802-1" ::= { sw945 2 } paramGroup OBJECT-GROUP OBJECTS { typeName, displayName, position, uptime, type, version, factoryReset, locate, statusColor, statusColorRGB, acceptEncodedAudio, audioBitDepth, outputResolution, referenceLockForceFreeRun, metaAFDEnable, metaVIEnable, metaWSSEnable, hDMIAudioStatus, inputMode, hDMIAudioType, hDMIColorspace, hDMIBitDepth, sDIOutputStandard, hDMIInStd, sDIOutputColorRange, audioChannelAssignment, sFPModulePartNumber, sFPModuleType, limitVideoStandardsList, embed3GLevelBStreamSelect, sDIOutputClipping, hDMISetRGBRange, metaVPID3DMode, sDIOut3GFormat, sDI3GTransport, subsampleFilter } STATUS current DESCRIPTION "Conformance group containing all device parameters" ::= { conformance 1 } paramCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance specification" MODULE -- This module MANDATORY-GROUPS { paramGroup } ::= { conformance 2 } END