-- Machine generated MIB file, do not edit!
--
-- MIB file for CMX5710, type code 11.C4, software label 688
-- Generated on Tuesday, 09-Aug-16 15:11:25 UTC
-- CVS $Id: CMX5710_11c4_sw688.mib,v 1.4 2016/08/09 15:11:26 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

CMX5710-11c4-sw688-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

cmx5710-11c4-sw688 MODULE-IDENTITY
    LAST-UPDATED "201608091511Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for CMX5710, type code 11.C4, software label 688"
    REVISION "201608091511Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 4548688 }

cmx5710-11c4 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type CMX5710"
    ::= { products 4548 }

sw688 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 688"
    ::= { cmx5710-11c4 688 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeAVidInputChannel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input2(0),
        input1(1)
    }

TypeAVidInputStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27)
    }

TypeAVidVIDSEL ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        autoPALBGHIDNTSCM(0),
        autoPALNNTSCM(1),
        nTSCM(2),
        nTSC443(3),
        pal(4),
        pALM(5),
        pALN(6)
    }

TypeAVidVIDSELPED ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        leave(0),
        remov(1)
    }

TypeAVidVIDSELStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nTSMMJ(0),
        nTSC443(1),
        pALM(2),
        pAL60(3),
        pALBGHID(4),
        secam(5),
        pALCombinationN(6),
        sECAM525(7),
        componentSignal(8)
    }

TypeAVidINSEL ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        yCSVideo(0),
        yuv(1),
        rgb(2),
        cVBSComposite(3)
    }

TypeAVidOFSEL ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n10Bit(0),
        n8Bit(1)
    }

TypeAVidLAGC ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        manual(0),
        noOverrideWhitePeak(1),
        autoOverrideWhitePeak(2),
        actVideoWithWhitePeak(3),
        actVideoWithAverageVideo(4),
        freezeLuminanceGain(5)
    }

TypeAVidLAGT ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n2Sec(0),
        n1Sec(1),
        n02s(2),
        auto(3)
    }

TypeAVidCAGC ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        manual(0),
        useLumaGainForChroma(1),
        automaticBasedOnCB(2),
        freezeChromaGain(3)
    }

TypeAVidCTI ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        n1(1),
        n2(2),
        n3(3),
        n4(4)
    }

TypeAVidYCMN ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        noComb(0),
        n3H(1),
        n5H(2),
        n5HAdaptive(3),
        n3HAdaptive(4)
    }

TypeAVidCCM ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        noComb(0),
        n4H(1),
        n4HAdaptive(2),
        n5H(3),
        n5HAdaptive(4)
    }

TypeAVidYSFM ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lP1(0),
        lP2(1),
        lP3(2),
        lP4(3),
        lP5(4),
        lP6(5),
        lP7(6),
        lP8(7),
        lP9(8),
        lP10(9),
        lP11(10),
        lP12(11),
        lP13(12),
        lP14(13),
        lP15(14),
        lP16(15),
        lP17(16),
        lP18(17),
        nN1(18),
        nN2(19),
        nN3(20),
        wN1(21),
        wN2(22),
        nN1X(23),
        nN2X(24),
        nN3X(25),
        wN1X(26),
        wN2X(27),
        wN3(28),
        unknown(29)
    }

TypeAVidCSFM ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lP07MHz(0),
        lP13MHz(1),
        lP15MHzEGCVBS(2),
        lP18MHzEGYC(3),
        lP22MHzEGYCYUV(4),
        lP30MHzEGYUV(5)
    }

TypeAVidPWUPD ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        updateOncePerLine(0),
        updateOncePerField(1)
    }

TypeAVidVBIEN ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        processVBIUsingVideoFilters(0),
        transparentNoFiltering(1)
    }

TypeAVidBLCVBI ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        decodeDuringVBI(0),
        blankDuringVBI(1)
    }

TypeAVidfirstActiveLine ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        transparent(0),
        blanked(1)
    }

TypeAVidRANGE ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        iTURBT656(0),
        extendedRange(1)
    }

TypeAVidCOR ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        noCoring(0),
        step8(1),
        step16(2),
        step24(3)
    }

TypeAVidcombPreFilt ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        narrow(0),
        medium(1),
        wide(2),
        widest(3)
    }

TypeAVidYPM ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n375DB(0),
        n25DB(1),
        n125DB(2),
        off0DB(3),
        n125DBX(4),
        n25DBX(5),
        n375DBX(6),
        n5DB(7)
    }

TypeRefPLL2700Lock ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0(0),
        n1(1)
    }

TypeDelayVideoMinMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        frameDelayMode(0),
        minimumDelayMode(1),
        frameSync(2)
    }

TypeDelayVideoUserMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        framesLinesPixels(0),
        milliseconds(1)
    }

TypeMetaFDWSSInputStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        notPresent(0),
        present(1)
    }

TypeMetaFDWSSInputValue ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        n1000FullFormat43(1),
        n0001Box149Center(2),
        n0010Box149Top(3),
        n1011Box169Center(4),
        n0100Box169Top(5),
        n1101Box169Center(6),
        n1110FullFormat169CenterAndProtected149(7),
        n0111FullFormat169Anamorphic(8)
    }

TypeMetaFDAFDOutputLine ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n8H(0),
        n9H(1),
        n10H(2),
        n11H(3),
        n12H(4),
        n13H(5),
        n14H(6),
        n15H(7),
        n16H(8),
        n17H(9),
        n18H(10),
        n19H(11),
        n20H(12),
        n21H(13),
        n22H(14),
        n23H(15),
        n24H(16),
        n25H(17),
        n26H(18),
        n27H(19),
        n28H(20),
        n29H(21),
        n30H(22),
        n31H(23),
        n32H(24),
        n33H(25),
        n34H(26),
        n35H(27),
        n36H(28),
        n37H(29),
        n38H(30),
        n39H(31),
        n40H(32),
        n41H(33),
        n8V(34),
        n9V(35),
        n10V(36),
        n11V(37),
        n12V(38),
        n13V(39),
        n14V(40),
        n15V(41),
        n16V(42),
        n17V(43),
        n18V(44),
        n19V(45),
        n20V(46),
        n21V(47),
        n22V(48),
        n23V(49),
        n24V(50),
        n25V(51),
        n26V(52),
        n27V(53),
        n28V(54),
        n29V(55),
        n30V(56),
        n31V(57),
        n32V(58),
        n33V(59),
        n34V(60),
        n35V(61),
        n36V(62),
        n37V(63),
        n38V(64),
        n39V(65),
        n40V(66),
        n41V(67)
    }

TypeMetaFDAFDOutputStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        notPresentUnchanged(0),
        removed(1),
        destinationLineFull(2),
        notEmbeddedNoInput(3),
        removedByVBlanking(4),
        removedByHBlanking(5),
        removedByLineDeletion(6),
        presentPassedThrough(7),
        replaced(8),
        embedded(9),
        embeddedNoInput(10),
        presentPassedThroughX(11),
        destinationLineFullX(12)
    }

TypeMetaFDAFDOutputValue ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        n0010LetterboxTopImageInA43Frame(1),
        n0011Letterbox149ImageInA43Frame(2),
        n0100169LetterboxCenterImageInA43Frame(3),
        n1000FullFrameImageInA43Frame(4),
        n1001FullFrameImageInA43Frame(5),
        n1010169LetterboxImageVerticallyCenteredInA43Frame(6),
        n1011149LetterboxImageVerticallyCenteredInA43Frame(7),
        n110143ImageShootProtect149InA43Frame(8),
        n1110169LetterboxImageShootProtect149InA43Frame(9),
        n1111169LetterboxImageShootProtect43InA43Frame(10),
        n0010169FullFrameImageInA169Frame(11),
        n0011149PillarboxImageInA169Frame(12),
        n0100169LetterboxCenterImageInA169Frame(13),
        n1000FullFrameImageInA169Frame(14),
        n1001PillarboxImageInA169Frame(15),
        n1010Protected169FullFrameImageInA169Frame(16),
        n1011149PillarboxImageInA169Frame(17),
        n110143PillarboxImageShootProtect149InA169Frame(18),
        n1110169ImageShootProtect149InA169Frame(19),
        n1111169ImageShootProtect43InA169Frame(20)
    }

TypeMetaFDVIOutputValue ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        n000152543(1),
        n001062543(2),
        n0101525169(3),
        n0110625169(4)
    }

TypeMetaFDAFDSourceSelection ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        user(0),
        afd(1),
        wss(2),
        vi(3)
    }

TypeMetaTCDVITCInputStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        notPresent(0)
    }

TypeMetaTCDVITCInputLine525A ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n10V(0),
        n11V(1),
        n12V(2),
        n13V(3),
        n14V(4),
        n15V(5),
        n16V(6),
        n17V(7),
        n18V(8),
        n19V(9)
    }

TypeMetaTCDVITCInputLine625A ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n6V(0),
        n7V(1),
        n8V(2),
        n9V(3),
        n10V(4),
        n11V(5),
        n12V(6),
        n13V(7),
        n14V(8),
        n15V(9),
        n16V(10),
        n17V(11),
        n18V(12),
        n19V(13),
        n20V(14),
        n21V(15),
        n22V(16)
    }

TypeInAes1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        missing(1),
        async(2),
        present(3)
    }

TypeInGrp1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nASDIMissing(0),
        nASDIInvalid(1),
        none(2),
        inserted(3),
        present(4),
        removed(5),
        overwritten(6)
    }

TypeSampleRateConversion1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        bypass(1)
    }

TypeSourceEmbAESStereo112 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        audExt1(0),
        audExt2(1),
        audExt3(2),
        audExt4(3),
        mute(4)
    }

TypeSourceEmbAES11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        audExt11(0),
        audExt12(1),
        audExt21(2),
        audExt22(3),
        audExt31(4),
        audExt32(5),
        audExt41(6),
        audExt42(7),
        muteL(8),
        muteR(9)
    }

TypeTestToneFrequency ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n1000Hz(0),
        n1010Hz(1)
    }

TypeEmbedBits1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n20Bit(0),
        n24Bit(1)
    }

TypeFSLevelInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n12dB(0),
        n15dB(1),
        n18dB(2),
        n22dB(3),
        n24dB(4)
    }

TypeSourceAESOut11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        extAES11(0),
        extAES12(1),
        extAES21(2),
        extAES22(3),
        extAES31(4),
        extAES32(5),
        extAES41(6),
        extAES42(7),
        muteL(8),
        muteR(9)
    }

TypeAudioContentAES1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeAudioContentStatusAES1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeAESPortAssignment1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input(0),
        output(1)
    }

TypeReferenceLock ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        referenceSource(0),
        videoInput(1)
    }

TypeReferenceSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        externBoard(0),
        internRack(1)
    }

TypeFreqPreselect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        evenFrequencies(0),
        oddFrequencies(1),
        followLastRefInput(2)
    }

TypeFreq ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        evenFreq(0),
        oddFreq(1),
        evenFreqX(2),
        oddFreqX(3),
        evenFreqXX(4)
    }

TypeSyncMode1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        frameSync(0),
        lineSyncH(1),
        lineSyncV(2)
    }

TypeInputFreezeVideo1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeOnSyncError(0),
        transparentForSyncErrors(1),
        forceFreeze(2)
    }

TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        black(0),
        red(1),
        green(2),
        blue(3),
        cyan(4),
        magenta(5),
        yellow(6),
        white(7),
        n15Grey(8),
        eQPath(9),
        pLLPath(10),
        eQPLLPath(11),
        n75Colorbar(12),
        colorbarOverRed(13)
    }

TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n525(0),
        n625(1),
        n720p60(2),
        n720p5994(3),
        n720p50(4),
        n720p30(5),
        n720p2997(6),
        n720p25(7),
        n720p24(8),
        n720p2398(9),
        n1080i60(10),
        n1080i5994(11),
        n1080i50(12),
        n1080p30(13),
        n1080p2997(14),
        n1080p25(15),
        n1080p24(16),
        n1080p2398(17),
        n1080psF24(18),
        n1080psF2398(19),
        n1080p60(20),
        n1080p5994(21),
        n1080p50(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        followLastInput(26)
    }

TypeOut1CSC ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        bypass(0),
        convert(1),
        convertOnlyChroma(2)
    }

TypeOut1CSCMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        iTURBT7095ITUCCIR60(1),
        iTUCCIR60ITURBT7095(2)
    }

TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        testPattern(1)
    }

TypeOut1FreezeMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeField1(0),
        freezeField2(1),
        freezeFrame(2),
        testPattern(3)
    }

TypeAudioMute1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        norm(0),
        mute(1)
    }

TypeAudioInvert1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        norm(0),
        inv(1)
    }

TypeAudioSilence1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        silence(0),
        noSilence(1)
    }

TypeAudioOverload1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        ok(0),
        overload(1)
    }

TypeWriteToFlash ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        settingsStored(0),
        writePending(1)
    }

TypeBackpanelStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        missing(1),
        present(2)
    }

TypeEventVideoInput1NoInputSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 8 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 9 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 10 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 11 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 12 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 13 }

eventVideoInputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Input: No Input"
    ::= { paramEntry 15 }

eventVideoInputstandarderror OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Input: standard error"
    ::= { paramEntry 16 }

eventAudioInput1LNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 1L No Input"
    ::= { paramEntry 17 }

eventAudioInput1RNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 1R No Input"
    ::= { paramEntry 18 }

eventAudioInput2LNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 2L No Input"
    ::= { paramEntry 19 }

eventAudioInput2RNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 2R No Input"
    ::= { paramEntry 20 }

eventAudioInput1Overload OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio Input 1: Overload"
    ::= { paramEntry 21 }

eventAudioInput2Overload OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio Input 2: Overload"
    ::= { paramEntry 22 }

aVidInputChannel OBJECT-TYPE
    SYNTAX TypeAVidInputChannel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Select Input Channel (1 or 2)"
    ::= { paramEntry 23 }

aVidInputStatus OBJECT-TYPE
    SYNTAX TypeAVidInputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Analog Video Input: Current Input Signal Status"
    ::= { paramEntry 24 }

inStandard OBJECT-TYPE
    SYNTAX TypeAVidInputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Current Input Signal Standard"
    ::= { paramEntry 25 }

aVidOutputStatus OBJECT-TYPE
    SYNTAX TypeAVidInputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Analog Video Output: Current Output Signal Status"
    ::= { paramEntry 26 }

aVidVIDSEL OBJECT-TYPE
    SYNTAX TypeAVidVIDSEL
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Select Type of Video Signal"
    ::= { paramEntry 27 }

aVidVIDSELPED OBJECT-TYPE
    SYNTAX TypeAVidVIDSELPED
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Remove Pedestal"
    ::= { paramEntry 28 }

aVidVIDSELStatus OBJECT-TYPE
    SYNTAX TypeAVidVIDSELStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Analog Video Input: Type of Video Signal"
    ::= { paramEntry 29 }

aVidINSEL OBJECT-TYPE
    SYNTAX TypeAVidINSEL
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Select Input Mode"
    ::= { paramEntry 30 }

aVidANTIALIASGY OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Enable Anti-Alias-Filter for G resp. Y channel"
    ::= { paramEntry 31 }

aVidANTIALIASRV OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Enable Anti-Alias-Filter for R resp. V channel"
    ::= { paramEntry 32 }

aVidANTIALIASBU OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Enable Anti-Alias-Filter for B resp. U channel"
    ::= { paramEntry 33 }

aVidOFSEL OBJECT-TYPE
    SYNTAX TypeAVidOFSEL
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Select Output Format 8 / 10 Bit"
    ::= { paramEntry 34 }

aVidCON OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Analog Contrast (Gain)"
    ::= { paramEntry 35 }

aVidSAT OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Analog Saturation (Chroma)"
    ::= { paramEntry 36 }

aVidBRI OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Analog Brightness (Pedestal)"
    ::= { paramEntry 37 }

aVidHUE OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Analog Hue"
    ::= { paramEntry 38 }

aVidLAGC OBJECT-TYPE
    SYNTAX TypeAVidLAGC
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Luminance Gain Control (Auto/Manual)"
    ::= { paramEntry 39 }

aVidLAGT OBJECT-TYPE
    SYNTAX TypeAVidLAGT
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Luminance Auto Gain time constant"
    ::= { paramEntry 40 }

aVidLMG OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Manual Luminance Gain"
    ::= { paramEntry 41 }

aVidCAGC OBJECT-TYPE
    SYNTAX TypeAVidCAGC
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chrominance Gain Auto/Manual"
    ::= { paramEntry 42 }

aVidCAGT OBJECT-TYPE
    SYNTAX TypeAVidLAGT
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chrominance Auto Gain time constant"
    ::= { paramEntry 43 }

aVidCGM OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Manual Chrominance Gain"
    ::= { paramEntry 44 }

aVidCTI OBJECT-TYPE
    SYNTAX TypeAVidCTI
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Color Transition Improvement"
    ::= { paramEntry 45 }

aVidYCMN OBJECT-TYPE
    SYNTAX TypeAVidYCMN
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Y Comb Filter"
    ::= { paramEntry 46 }

aVidCCM OBJECT-TYPE
    SYNTAX TypeAVidCCM
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Color Comb Filter"
    ::= { paramEntry 47 }

aVidYSFM OBJECT-TYPE
    SYNTAX TypeAVidYSFM
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Y Shaping Filter"
    ::= { paramEntry 48 }

aVidCSFM OBJECT-TYPE
    SYNTAX TypeAVidCSFM
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: C Shaping Filter allows selection from a range of low-pass chrominance filters"
    ::= { paramEntry 49 }

aVidPWUPD OBJECT-TYPE
    SYNTAX TypeAVidPWUPD
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Auto Gain Update"
    ::= { paramEntry 50 }

aVidCKE OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Color Kill Enable"
    ::= { paramEntry 51 }

aVidVBIEN OBJECT-TYPE
    SYNTAX TypeAVidVBIEN
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: select whether or not to apply filters in VBI (vertical blanking interval)"
    ::= { paramEntry 52 }

aVidBLCVBI OBJECT-TYPE
    SYNTAX TypeAVidBLCVBI
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: special handling of Chroma in VBI (vertical blanking interval)"
    ::= { paramEntry 53 }

aVidfirstActiveLine OBJECT-TYPE
    SYNTAX TypeAVidfirstActiveLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: First active line can be made transparent or blanked"
    ::= { paramEntry 54 }

aVidsecondActiveLine OBJECT-TYPE
    SYNTAX TypeAVidfirstActiveLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Second active line can be made transparent or blanked"
    ::= { paramEntry 55 }

aVidnoiseFilterThreshold OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Set Noise Filter Level"
    ::= { paramEntry 56 }

aVidBETACAM OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Input from Betacam"
    ::= { paramEntry 57 }

aVidRANGE OBJECT-TYPE
    SYNTAX TypeAVidRANGE
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Allows to select the range of output values. Can be BT656 compliant (16<Y<235 ; 16<C<240), or can fill the whole accessible number range (1<Y<254 ; 1<C<254)."
    ::= { paramEntry 59 }

aVidCOR OBJECT-TYPE
    SYNTAX TypeAVidCOR
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Select Coring behaviour"
    ::= { paramEntry 60 }

aVidcombPreFilt OBJECT-TYPE
    SYNTAX TypeAVidcombPreFilt
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Select Comb Pre-Filter"
    ::= { paramEntry 61 }

aVidYPM OBJECT-TYPE
    SYNTAX TypeAVidYPM
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Select Luminance Peak Filter"
    ::= { paramEntry 62 }

aVidnoiseFilter OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Enable Noise Filter"
    ::= { paramEntry 63 }

aVidGainCr OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chroma Adjustment: Gain Cr"
    ::= { paramEntry 64 }

aVidGainCb OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chroma Adjustment: Gain Cb"
    ::= { paramEntry 65 }

aVidOffsetCr OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chroma Adjustment: Offset Cr"
    ::= { paramEntry 66 }

aVidOffsetCb OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chroma Adjustment: Offset Cb"
    ::= { paramEntry 67 }

outStandard OBJECT-TYPE
    SYNTAX TypeAVidInputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI output"
    ::= { paramEntry 68 }

refPLL2700Lock OBJECT-TYPE
    SYNTAX TypeRefPLL2700Lock
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Lock-Status of Reference PLL 27 MHz (1 or 0)"
    ::= { paramEntry 70 }

refPLL74xLock OBJECT-TYPE
    SYNTAX TypeRefPLL2700Lock
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Lock-Status of Reference PLL 74,x MHz (1 or 0)"
    ::= { paramEntry 71 }

delayVideoMinMode OBJECT-TYPE
    SYNTAX TypeDelayVideoMinMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "internal minimum delay<br>setting to <i>Minimum</i>, may result in mis-aligned metadata embedding<br>setting to <i>Frame</i> aligns output to REF-input (from Rack-distribution)"
    ::= { paramEntry 72 }

delayVideoUserMode OBJECT-TYPE
    SYNTAX TypeDelayVideoUserMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "User-defined video delay control mode (frames / lines / pixels or milliseconds)"
    ::= { paramEntry 73 }

delayVideoFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in frames. Combine with Delay/Video/Lines and Delay/Video/Pixels for total delay"
    ::= { paramEntry 74 }

delayVideoLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in lines. Combine with Delay/Video/Frames and Delay/Video/Pixels for total delay"
    ::= { paramEntry 75 }

delayVideoPixels OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in pixels. Combine with Delay/Video/Frames and Delay/Video/Lines for total delay"
    ::= { paramEntry 76 }

delayVideoTotalMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Total SDI output delay in milliseconds"
    ::= { paramEntry 77 }

delayAudioSDIOutGang OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gang-Mode: Couple all SDI Out Delay values (modify all delay controls synchronously)"
    ::= { paramEntry 78 }

delayAudioSDIIn11 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 79 }

delayAudioSDIIn12 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 80 }

delayAudioSDIIn21 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 81 }

delayAudioSDIIn22 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 82 }

delayAudioSDIIn31 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 83 }

delayAudioSDIIn32 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 84 }

delayAudioSDIIn41 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 85 }

delayAudioSDIIn42 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 86 }

delayAudioSDIOut11 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 87 }

delayAudioSDIOut12 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 88 }

delayAudioSDIOut21 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 89 }

delayAudioSDIOut22 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 90 }

delayAudioSDIOut31 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 91 }

delayAudioSDIOut32 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 92 }

delayAudioSDIOut41 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 93 }

delayAudioSDIOut42 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 94 }

delayAudioAESOutGang OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gang-Mode: Couple all AES Out Delay values (modify all delay controls synchronously)"
    ::= { paramEntry 95 }

delayAudioAESIn1 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 96 }

delayAudioAESIn2 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 97 }

delayAudioAESOut1 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 98 }

delayAudioAESOut2 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 99 }

delayAudioAnalogIn1 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo Audio channel in milliseconds"
    ::= { paramEntry 100 }

delayAudioAnalogIn2 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo Audio channel in milliseconds"
    ::= { paramEntry 101 }

delayAudioAnalogOut1 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo Audio channel in milliseconds"
    ::= { paramEntry 102 }

delayAudioAnalogOut2 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo Audio channel in milliseconds"
    ::= { paramEntry 103 }

metaLineDeletionField1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lines to be deleted"
    ::= { paramEntry 104 }

metaLineDeletionField2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lines to be deleted"
    ::= { paramEntry 105 }

metaFDWSSInputStatus OBJECT-TYPE
    SYNTAX TypeMetaFDWSSInputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Wide Screen Signaling in SDI input signal"
    ::= { paramEntry 106 }

metaFDWSSInputValue OBJECT-TYPE
    SYNTAX TypeMetaFDWSSInputValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Detected WSS code on SDI input"
    ::= { paramEntry 107 }

metaFDWSSInputDelete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete Wide Screen Signaling from SDI input signal"
    ::= { paramEntry 108 }

metaFDAFDOutputLine OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Target line of Active format description in SDI output signal"
    ::= { paramEntry 109 }

metaFDAFDOutputLineAuto OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Automatic selection of Active format description line in SDI output signal"
    ::= { paramEntry 110 }

metaFDAFDInsert OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert Active format description into the video output data"
    ::= { paramEntry 111 }

metaFDWSSInsert OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert Wide Screen Signaling into the video output data"
    ::= { paramEntry 112 }

metaFDVIInsert OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert Video Index into the video output data"
    ::= { paramEntry 113 }

metaFDAFDOutputStatus OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Active format description in SDI output signal"
    ::= { paramEntry 114 }

metaFDWSSOutputStatus OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Wide Screen Signaling in SDI output signal"
    ::= { paramEntry 115 }

metaFDVIOutputStatus OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Video Index in SDI output signal"
    ::= { paramEntry 116 }

metaFDAFDOutputValue OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embedded AFD code in SDI output"
    ::= { paramEntry 117 }

metaFDWSSOutputValue OBJECT-TYPE
    SYNTAX TypeMetaFDWSSInputValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embedded WSS code in SDI output"
    ::= { paramEntry 118 }

metaFDVIOutputValue OBJECT-TYPE
    SYNTAX TypeMetaFDVIOutputValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embedded VI code in SDI output"
    ::= { paramEntry 119 }

metaFDAFDSourceSelection OBJECT-TYPE
    SYNTAX TypeMetaFDAFDSourceSelection
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Choose source for Insertion of Active format description into the video output data"
    ::= { paramEntry 120 }

metaFDWSSSourceSelection OBJECT-TYPE
    SYNTAX TypeMetaFDAFDSourceSelection
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Choose source for Insertion of Active format description into the video output data"
    ::= { paramEntry 121 }

metaFDVISourceSelection OBJECT-TYPE
    SYNTAX TypeMetaFDAFDSourceSelection
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Choose source for Insertion of Video Index into the video output data"
    ::= { paramEntry 122 }

metaTCATCLTCOutputEmbed OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed ATC-LTC into SDI output signal"
    ::= { paramEntry 123 }

metaTCATCLTCOutputLine OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Target line of ATC-LTC in SDI output signal"
    ::= { paramEntry 124 }

metaTCATCLTCOutputInsertGPI OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert external GPI into output ATC-LTC"
    ::= { paramEntry 125 }

metaTCATCLTCOutputStatus OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of ATC-LTC in SDI output signal"
    ::= { paramEntry 126 }

metaTCATCVITCOutputEmbed OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed ATC-VITC into SDI output signal"
    ::= { paramEntry 127 }

metaTCATCVITCOutputLine OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Target line of ATC-VITC in SDI output signal"
    ::= { paramEntry 128 }

metaTCATCVITCOutputInsertGPI OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert external GPI into output ATC-VITC"
    ::= { paramEntry 129 }

metaTCATCVITCOutputStatus OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of ATC-VITC in SDI output signal"
    ::= { paramEntry 130 }

metaTCDVITCInputStatus OBJECT-TYPE
    SYNTAX TypeMetaTCDVITCInputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of D-VITC in SDI input signal"
    ::= { paramEntry 131 }

metaTCDVITCInputLine525A OBJECT-TYPE
    SYNTAX TypeMetaTCDVITCInputLine525A
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source line of D-VITC in SDI input signal A"
    ::= { paramEntry 132 }

metaTCDVITCInputLine525B OBJECT-TYPE
    SYNTAX TypeMetaTCDVITCInputLine525A
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source line of D-VITC in SDI input signal B"
    ::= { paramEntry 133 }

metaTCDVITCInputLine625A OBJECT-TYPE
    SYNTAX TypeMetaTCDVITCInputLine625A
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source line of D-VITC in SDI input signal A"
    ::= { paramEntry 134 }

metaTCDVITCInputLine625B OBJECT-TYPE
    SYNTAX TypeMetaTCDVITCInputLine625A
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source line of D-VITC in SDI input signal B"
    ::= { paramEntry 135 }

metaTCDVITCInputLineDetect OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Automatic D-VITC line detection line in SDI input signal"
    ::= { paramEntry 136 }

metaTCDVITCInputDelete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete D-VITC from SDI input signal"
    ::= { paramEntry 137 }

metaTCDVITCOutputEmbed OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed D-VITC into SDI output signal"
    ::= { paramEntry 138 }

metaTCDVITCOutputLine525A OBJECT-TYPE
    SYNTAX TypeMetaTCDVITCInputLine525A
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Target line of D-VITC in SDI output signal A"
    ::= { paramEntry 139 }

metaTCDVITCOutputLine525B OBJECT-TYPE
    SYNTAX TypeMetaTCDVITCInputLine525A
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Target line of D-VITC in SDI output signal B"
    ::= { paramEntry 140 }

metaTCDVITCOutputLine625A OBJECT-TYPE
    SYNTAX TypeMetaTCDVITCInputLine625A
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Target line of D-VITC in SDI output signal A"
    ::= { paramEntry 141 }

metaTCDVITCOutputLine625B OBJECT-TYPE
    SYNTAX TypeMetaTCDVITCInputLine625A
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Target line of D-VITC in SDI output signal B"
    ::= { paramEntry 142 }

metaTCDVITCOutputInsertGPI OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert external GPI into output D-VITC"
    ::= { paramEntry 143 }

metaTCDVITCOutputStatus OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of D-VITC in SDI output signal"
    ::= { paramEntry 144 }

metaTCDVITCAInputStatus OBJECT-TYPE
    SYNTAX TypeMetaFDWSSInputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of D-VITCA in SDI input signal"
    ::= { paramEntry 145 }

metaTCDVITCAOutputStatus OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of D-VITCA in SDI output signal"
    ::= { paramEntry 146 }

metaTCDVITCBInputStatus OBJECT-TYPE
    SYNTAX TypeMetaFDWSSInputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of D-VITCB in SDI input signal"
    ::= { paramEntry 147 }

metaTCDVITCBOutputStatus OBJECT-TYPE
    SYNTAX TypeMetaFDAFDOutputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of D-VITCB in SDI output signal"
    ::= { paramEntry 148 }

metaTCOutputLineAuto OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Automatic selection of timecode lines in SDI output signal"
    ::= { paramEntry 149 }

metaTCBurnIn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Timecode Burn-In"
    ::= { paramEntry 150 }

metaTCBurnInStatus OBJECT-TYPE
    SYNTAX TypeMetaFDWSSInputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Timecode Burn-In Status"
    ::= { paramEntry 151 }

metaTCBurnInVerticalPos OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Timecode Burn-In Vertical Position"
    ::= { paramEntry 152 }

metaTCBurnInHorizontalPos OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Timecode Burn-In Horizontal Position"
    ::= { paramEntry 153 }

inAes1 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 1 status"
    ::= { paramEntry 154 }

inAes2 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 2 status"
    ::= { paramEntry 155 }

inAudioStatus11 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status Analog Input 1, Left"
    ::= { paramEntry 156 }

inAudioStatus12 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status Analog Input 1, Right"
    ::= { paramEntry 157 }

inAudioStatus21 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status Analog Input 2, Left"
    ::= { paramEntry 158 }

inAudioStatus22 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status Analog Input 2, Right"
    ::= { paramEntry 159 }

inGrp1 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 160 }

inGrp2 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 161 }

inGrp3 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 162 }

inGrp4 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 163 }

embedGroup1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 1 into the video output"
    ::= { paramEntry 164 }

embedGroup2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 2 into the video output"
    ::= { paramEntry 165 }

embedGroup3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 3 into the video output"
    ::= { paramEntry 166 }

embedGroup4 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 4 into the video output"
    ::= { paramEntry 167 }

sampleRateConversion1 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 1"
    ::= { paramEntry 168 }

sampleRateConversion2 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 2"
    ::= { paramEntry 169 }

sourceEmbAESStereo112 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 1.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES1.1-2.1 and SourceEmbAES1.1-2.2"
    ::= { paramEntry 179 }

sourceEmbAES11 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.1"
    ::= { paramEntry 180 }

sourceEmbAES12 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.2"
    ::= { paramEntry 182 }

sourceEmbAESStereo134 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 1.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES1.3-4.1 and SourceEmbAES1.3-4.2"
    ::= { paramEntry 184 }

sourceEmbAES13 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.3"
    ::= { paramEntry 185 }

sourceEmbAES14 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.4"
    ::= { paramEntry 187 }

sourceEmbAESStereo212 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 2.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES2.1-2.1 and SourceEmbAES2.1-2.2"
    ::= { paramEntry 189 }

sourceEmbAES21 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.1"
    ::= { paramEntry 190 }

sourceEmbAES22 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.2"
    ::= { paramEntry 192 }

sourceEmbAESStereo234 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 2.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES2.3-4.1 and SourceEmbAES2.3-4.2"
    ::= { paramEntry 194 }

sourceEmbAES23 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.3"
    ::= { paramEntry 195 }

sourceEmbAES24 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.4"
    ::= { paramEntry 197 }

sourceEmbAESStereo312 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 3.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES3.1-2.1 and SourceEmbAES3.1-2.2"
    ::= { paramEntry 199 }

sourceEmbAES31 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.1"
    ::= { paramEntry 200 }

sourceEmbAES32 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.2"
    ::= { paramEntry 202 }

sourceEmbAESStereo334 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 3.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES3.3-4.1 and SourceEmbAES3.3-4.2"
    ::= { paramEntry 204 }

sourceEmbAES33 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.3"
    ::= { paramEntry 205 }

sourceEmbAES34 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.4"
    ::= { paramEntry 207 }

sourceEmbAESStereo412 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 4.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES4.1-2.1 and SourceEmbAES4.1-2.2"
    ::= { paramEntry 209 }

sourceEmbAES41 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.1"
    ::= { paramEntry 210 }

sourceEmbAES42 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.2"
    ::= { paramEntry 212 }

sourceEmbAESStereo434 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 4.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES4.3-4.1 and SourceEmbAES4.3-4.2"
    ::= { paramEntry 214 }

sourceEmbAES43 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.3"
    ::= { paramEntry 215 }

sourceEmbAES44 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.4"
    ::= { paramEntry 217 }

testToneFrequency OBJECT-TYPE
    SYNTAX TypeTestToneFrequency
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Frequency for the Test Tone"
    ::= { paramEntry 218 }

embedBits1 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 1 (20/24 bit)"
    ::= { paramEntry 219 }

embedBits2 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 2 (20/24 bit)"
    ::= { paramEntry 220 }

embedBits3 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 3 (20/24 bit)"
    ::= { paramEntry 221 }

embedBits4 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 4 (20/24 bit)"
    ::= { paramEntry 222 }

fSLevelInput OBJECT-TYPE
    SYNTAX TypeFSLevelInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Full-Scale level for all analog Audio Inputs"
    ::= { paramEntry 223 }

cSBTransSDTV OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Channel Status Block Transparency in SDTV.
OFF: CSB is re-generated to guarantee compatibility with deembedders 
ON:  CSB is embedded, unchanged. Beware of possible imcompatibilities with certain deembedders"
    ::= { paramEntry 224 }

sourceAESOut11 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.1"
    ::= { paramEntry 227 }

sourceAESOut12 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.2"
    ::= { paramEntry 228 }

sourceAESOut21 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.1"
    ::= { paramEntry 232 }

sourceAESOut22 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.2"
    ::= { paramEntry 233 }

vFlag OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Activate Valid Audio Flag when missing audio on AES Inputs"
    ::= { paramEntry 235 }

audioContentAES1 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 1"
    ::= { paramEntry 236 }

audioContentAES2 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 2"
    ::= { paramEntry 237 }

audioContentStatusAES1 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 1"
    ::= { paramEntry 238 }

audioContentStatusAES2 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 2"
    ::= { paramEntry 239 }

aESPortAssignment1 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 1 as input or output"
    ::= { paramEntry 240 }

aESPortAssignment2 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 2 as input or output"
    ::= { paramEntry 241 }

referenceLock OBJECT-TYPE
    SYNTAX TypeReferenceLock
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock outputs to external analog Reference or to Video Input (self-lock)"
    ::= { paramEntry 242 }

referenceStatus OBJECT-TYPE
    SYNTAX TypeAVidInputStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of Reference Input"
    ::= { paramEntry 243 }

referenceSource OBJECT-TYPE
    SYNTAX TypeReferenceSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
    ::= { paramEntry 244 }

freqPreselect OBJECT-TYPE
    SYNTAX TypeFreqPreselect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the frequency domain for the complete device (inputs, reference and outputs)"
    ::= { paramEntry 245 }

freq OBJECT-TYPE
    SYNTAX TypeFreq
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
    ::= { paramEntry 246 }

inputToRefTolerance OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Open a tolerance window in the relative timing between SDI In and REF In.<br>To be applied for modifying the timing behavior in Framesync mode.When modified to ON, the SDI Input is accepted as aligned to REF even if it arrives up to 12usec later than REF.<br>See User Manual for details."
    ::= { paramEntry 247 }

syncMode1 OBJECT-TYPE
    SYNTAX TypeSyncMode1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Synchronization Mode for SDI Channel 1"
    ::= { paramEntry 248 }

inputFreezeVideo1 OBJECT-TYPE
    SYNTAX TypeInputFreezeVideo1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: Sync Errors are transmitted to output, no freezing
Freeze on Sync Error: Output repeats last correct frame while Sync errors received on input."
    ::= { paramEntry 249 }

syncVideoIn1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify that the Video Input is synchronous to the Reference (while a static offset is allowed).<br>This will add an automatic audio-delay compensation according to that Video-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.<br>NOTE that this setting shall NOT be activated for non-synchronous Video inputs, because this can lead to intermittent artifacts in the audio path."
    ::= { paramEntry 250 }

out1TotalProcTime OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show the total delay comprising the processing time and the user delay <br>on the used path from SDI Input to SDI Output 1"
    ::= { paramEntry 251 }

out1ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable aperture correction"
    ::= { paramEntry 252 }

out1ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: aperture correction level"
    ::= { paramEntry 253 }

out1HFlip OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: Mirror the output image on the vertical center axis (flip in H direction)."
    ::= { paramEntry 254 }

out1Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust Video Gain"
    ::= { paramEntry 255 }

out1Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Saturation"
    ::= { paramEntry 256 }

out1BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
    ::= { paramEntry 257 }

out1Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Hue"
    ::= { paramEntry 258 }

out1TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 259 }

out1TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 260 }

out1TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable preselected test pattern"
    ::= { paramEntry 261 }

out1CSC OBJECT-TYPE
    SYNTAX TypeOut1CSC
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Color Space Conversion Operation, SDI Out 1
 - bypass completely
 - convert luma&chroma
 - convert only chroma"
    ::= { paramEntry 262 }

out1CSCMode OBJECT-TYPE
    SYNTAX TypeOut1CSCMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Color Space Conversion Mode of SDI Out 1"
    ::= { paramEntry 263 }

out1IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 264 }

out1ClipHeadroom OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: Clips Y code values outside the range of 40h to 3ACh
 and Cr, Cb code values outside the range of 40h to 3C0h."
    ::= { paramEntry 265 }

out1FreezeMode OBJECT-TYPE
    SYNTAX TypeOut1FreezeMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify freeze mode if input is missing."
    ::= { paramEntry 266 }

audioGain1L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 1L"
    ::= { paramEntry 267 }

audioMute1L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 1L"
    ::= { paramEntry 268 }

audioInvert1L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 1L"
    ::= { paramEntry 269 }

audioMixDown1L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 1L"
    ::= { paramEntry 270 }

audioSilence1L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 1L"
    ::= { paramEntry 271 }

audioOverload1L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 1L"
    ::= { paramEntry 272 }

audioTestTone1L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 1L"
    ::= { paramEntry 273 }

audioGain1R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 1R"
    ::= { paramEntry 274 }

audioMute1R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 1R"
    ::= { paramEntry 275 }

audioInvert1R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 1R"
    ::= { paramEntry 276 }

audioMixDown1R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 1R"
    ::= { paramEntry 277 }

audioSilence1R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 1R"
    ::= { paramEntry 278 }

audioOverload1R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 1R"
    ::= { paramEntry 279 }

audioTestTone1R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 1R"
    ::= { paramEntry 280 }

audioGain2L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 2L"
    ::= { paramEntry 281 }

audioMute2L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 2L"
    ::= { paramEntry 282 }

audioInvert2L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 2L"
    ::= { paramEntry 283 }

audioMixDown2L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 2L"
    ::= { paramEntry 284 }

audioSilence2L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 2L"
    ::= { paramEntry 285 }

audioOverload2L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 2L"
    ::= { paramEntry 286 }

audioTestTone2L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 2L"
    ::= { paramEntry 287 }

audioGain2R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 2R"
    ::= { paramEntry 288 }

audioMute2R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 2R"
    ::= { paramEntry 289 }

audioInvert2R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 2R"
    ::= { paramEntry 290 }

audioMixDown2R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 2R"
    ::= { paramEntry 291 }

audioSilence2R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 2R"
    ::= { paramEntry 292 }

audioOverload2R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 2R"
    ::= { paramEntry 293 }

audioTestTone2R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 2R"
    ::= { paramEntry 294 }

audioGain3L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 3L"
    ::= { paramEntry 295 }

audioMute3L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 3L"
    ::= { paramEntry 296 }

audioInvert3L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 3L"
    ::= { paramEntry 297 }

audioMixDown3L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 3L"
    ::= { paramEntry 298 }

audioSilence3L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 3L"
    ::= { paramEntry 299 }

audioOverload3L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 3L"
    ::= { paramEntry 300 }

audioTestTone3L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 3L"
    ::= { paramEntry 301 }

audioGain3R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 3R"
    ::= { paramEntry 302 }

audioMute3R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 3R"
    ::= { paramEntry 303 }

audioInvert3R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 3R"
    ::= { paramEntry 304 }

audioMixDown3R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 3R"
    ::= { paramEntry 305 }

audioSilence3R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 3R"
    ::= { paramEntry 306 }

audioOverload3R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 3R"
    ::= { paramEntry 307 }

audioTestTone3R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 3R"
    ::= { paramEntry 308 }

audioGain4L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 4L"
    ::= { paramEntry 309 }

audioMute4L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 4L"
    ::= { paramEntry 310 }

audioInvert4L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 4L"
    ::= { paramEntry 311 }

audioMixDown4L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 4L"
    ::= { paramEntry 312 }

audioSilence4L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 4L"
    ::= { paramEntry 313 }

audioOverload4L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 4L"
    ::= { paramEntry 314 }

audioTestTone4L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 4L"
    ::= { paramEntry 315 }

audioGain4R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 4R"
    ::= { paramEntry 316 }

audioMute4R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 4R"
    ::= { paramEntry 317 }

audioInvert4R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 4R"
    ::= { paramEntry 318 }

audioMixDown4R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 4R"
    ::= { paramEntry 319 }

audioSilence4R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 4R"
    ::= { paramEntry 320 }

audioOverload4R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 4R"
    ::= { paramEntry 321 }

audioTestTone4R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 4R"
    ::= { paramEntry 322 }

writeToFlash OBJECT-TYPE
    SYNTAX TypeWriteToFlash
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Current device settings stored in devices local Flash-RAM: (settings stored) or (write pending)"
    ::= { paramEntry 336 }

backpanelStatus OBJECT-TYPE
    SYNTAX TypeBackpanelStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication of the device backpanel"
    ::= { paramEntry 337 }

aVidComponentsGainY OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chroma Adjustment: Gain Y"
    ::= { paramEntry 338 }

aVidComponentsGainCr OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chroma Adjustment: Gain Cr"
    ::= { paramEntry 339 }

aVidComponentsGainCb OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chroma Adjustment: Gain Cb"
    ::= { paramEntry 340 }

aVidComponentsOffsetY OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chroma Adjustment: Offset Y"
    ::= { paramEntry 341 }

aVidComponentsOffsetCr OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chroma Adjustment: Offset Cr"
    ::= { paramEntry 342 }

aVidComponentsOffsetCb OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Chroma Adjustment: Offset Cb"
    ::= { paramEntry 343 }

metaFDWSSFollowInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Choose WSS in Input as source for Insertion of Active format description into the video output data"
    ::= { paramEntry 344 }

out1VBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable V-Blanking"
    ::= { paramEntry 345 }

eventVideoInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Video Input 1 No Input"
    ::= { paramEntry 346 }

eventAudioInput3LNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 3L No Input"
    ::= { paramEntry 347 }

eventAudioInput3RNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 3R No Input"
    ::= { paramEntry 348 }

eventAudioInput4LNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 4L No Input"
    ::= { paramEntry 349 }

eventAudioInput4RNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 4R No Input"
    ::= { paramEntry 350 }

eventAESInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 1 No Input"
    ::= { paramEntry 351 }

eventAESInput2NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 2 No Input"
    ::= { paramEntry 352 }

eventEmbedderMissingInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Embedder Missing Input"
    ::= { paramEntry 353 }

eventReferenceNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Reference No Input"
    ::= { paramEntry 354 }

eventCouldnotlocktoReference OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Could not lock to Reference"
    ::= { paramEntry 355 }

eventPrimaryPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Primary Power missing"
    ::= { paramEntry 356 }

eventRedundantPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Redundant Power missing"
    ::= { paramEntry 357 }

eventFanFailure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Fan Failure"
    ::= { paramEntry 358 }

eventVideoInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Video Input 1 No Input"
    ::= { paramEntry 359 }

eventAudioInput1LNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 1L No Input"
    ::= { paramEntry 360 }

eventAudioInput1RNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 1R No Input"
    ::= { paramEntry 361 }

eventAudioInput2LNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 2L No Input"
    ::= { paramEntry 362 }

eventAudioInput2RNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 2R No Input"
    ::= { paramEntry 363 }

eventAudioInput3LNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 3L No Input"
    ::= { paramEntry 364 }

eventAudioInput3RNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 3R No Input"
    ::= { paramEntry 365 }

eventAudioInput4LNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 4L No Input"
    ::= { paramEntry 366 }

eventAudioInput4RNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 4R No Input"
    ::= { paramEntry 367 }

eventAESInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 1 No Input"
    ::= { paramEntry 368 }

eventAESInput2NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 2 No Input"
    ::= { paramEntry 369 }

eventEmbedderMissingInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Embedder Missing Input"
    ::= { paramEntry 370 }

eventReferenceNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Reference No Input"
    ::= { paramEntry 371 }

eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to Reference"
    ::= { paramEntry 372 }

eventPrimaryPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Primary Power missing"
    ::= { paramEntry 373 }

eventRedundantPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Redundant Power missing"
    ::= { paramEntry 374 }

eventFanFailureSNMP OBJECT-TYPE
    SYNTAX TypeEventVideoInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Fan Failure"
    ::= { paramEntry 375 }

crossBarAudioOutEmbAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Crossbar for Embedded Audio Out AES"
    ::= { paramEntry 376 }

crossBarAudioOutAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Crossbar for External Audio Out AES"
    ::= { paramEntry 377 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 378 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of CMX5710 parameters"
    ::= { sw688 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of CMX5710 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    boardID Integer32,
    eventVideoInputNoInput OnOffValue,
    eventVideoInputstandarderror OnOffValue,
    eventAudioInput1LNoInput OnOffValue,
    eventAudioInput1RNoInput OnOffValue,
    eventAudioInput2LNoInput OnOffValue,
    eventAudioInput2RNoInput OnOffValue,
    eventAudioInput1Overload OnOffValue,
    eventAudioInput2Overload OnOffValue,
    aVidInputChannel TypeAVidInputChannel,
    aVidInputStatus TypeAVidInputStatus,
    inStandard TypeAVidInputStatus,
    aVidOutputStatus TypeAVidInputStatus,
    aVidVIDSEL TypeAVidVIDSEL,
    aVidVIDSELPED TypeAVidVIDSELPED,
    aVidVIDSELStatus TypeAVidVIDSELStatus,
    aVidINSEL TypeAVidINSEL,
    aVidANTIALIASGY OnOffValue,
    aVidANTIALIASRV OnOffValue,
    aVidANTIALIASBU OnOffValue,
    aVidOFSEL TypeAVidOFSEL,
    aVidCON Integer32,
    aVidSAT FixedPointValue1,
    aVidBRI Integer32,
    aVidHUE Integer32,
    aVidLAGC TypeAVidLAGC,
    aVidLAGT TypeAVidLAGT,
    aVidLMG Integer32,
    aVidCAGC TypeAVidCAGC,
    aVidCAGT TypeAVidLAGT,
    aVidCGM Integer32,
    aVidCTI TypeAVidCTI,
    aVidYCMN TypeAVidYCMN,
    aVidCCM TypeAVidCCM,
    aVidYSFM TypeAVidYSFM,
    aVidCSFM TypeAVidCSFM,
    aVidPWUPD TypeAVidPWUPD,
    aVidCKE OnOffValue,
    aVidVBIEN TypeAVidVBIEN,
    aVidBLCVBI TypeAVidBLCVBI,
    aVidfirstActiveLine TypeAVidfirstActiveLine,
    aVidsecondActiveLine TypeAVidfirstActiveLine,
    aVidnoiseFilterThreshold Integer32,
    aVidBETACAM OnOffValue,
    aVidRANGE TypeAVidRANGE,
    aVidCOR TypeAVidCOR,
    aVidcombPreFilt TypeAVidcombPreFilt,
    aVidYPM TypeAVidYPM,
    aVidnoiseFilter OnOffValue,
    aVidGainCr Integer32,
    aVidGainCb Integer32,
    aVidOffsetCr Integer32,
    aVidOffsetCb Integer32,
    outStandard TypeAVidInputStatus,
    refPLL2700Lock TypeRefPLL2700Lock,
    refPLL74xLock TypeRefPLL2700Lock,
    delayVideoMinMode TypeDelayVideoMinMode,
    delayVideoUserMode TypeDelayVideoUserMode,
    delayVideoFrames Integer32,
    delayVideoLines Integer32,
    delayVideoPixels Integer32,
    delayVideoTotalMs FixedPointValue3,
    delayAudioSDIOutGang OnOffValue,
    delayAudioSDIIn11 FixedPointValue2,
    delayAudioSDIIn12 FixedPointValue2,
    delayAudioSDIIn21 FixedPointValue2,
    delayAudioSDIIn22 FixedPointValue2,
    delayAudioSDIIn31 FixedPointValue2,
    delayAudioSDIIn32 FixedPointValue2,
    delayAudioSDIIn41 FixedPointValue2,
    delayAudioSDIIn42 FixedPointValue2,
    delayAudioSDIOut11 FixedPointValue2,
    delayAudioSDIOut12 FixedPointValue2,
    delayAudioSDIOut21 FixedPointValue2,
    delayAudioSDIOut22 FixedPointValue2,
    delayAudioSDIOut31 FixedPointValue2,
    delayAudioSDIOut32 FixedPointValue2,
    delayAudioSDIOut41 FixedPointValue2,
    delayAudioSDIOut42 FixedPointValue2,
    delayAudioAESOutGang OnOffValue,
    delayAudioAESIn1 FixedPointValue2,
    delayAudioAESIn2 FixedPointValue2,
    delayAudioAESOut1 FixedPointValue2,
    delayAudioAESOut2 FixedPointValue2,
    delayAudioAnalogIn1 FixedPointValue2,
    delayAudioAnalogIn2 FixedPointValue2,
    delayAudioAnalogOut1 FixedPointValue2,
    delayAudioAnalogOut2 FixedPointValue2,
    metaLineDeletionField1 DisplayString,
    metaLineDeletionField2 DisplayString,
    metaFDWSSInputStatus TypeMetaFDWSSInputStatus,
    metaFDWSSInputValue TypeMetaFDWSSInputValue,
    metaFDWSSInputDelete OnOffValue,
    metaFDAFDOutputLine TypeMetaFDAFDOutputLine,
    metaFDAFDOutputLineAuto OnOffValue,
    metaFDAFDInsert OnOffValue,
    metaFDWSSInsert OnOffValue,
    metaFDVIInsert OnOffValue,
    metaFDAFDOutputStatus TypeMetaFDAFDOutputStatus,
    metaFDWSSOutputStatus TypeMetaFDAFDOutputStatus,
    metaFDVIOutputStatus TypeMetaFDAFDOutputStatus,
    metaFDAFDOutputValue TypeMetaFDAFDOutputValue,
    metaFDWSSOutputValue TypeMetaFDWSSInputValue,
    metaFDVIOutputValue TypeMetaFDVIOutputValue,
    metaFDAFDSourceSelection TypeMetaFDAFDSourceSelection,
    metaFDWSSSourceSelection TypeMetaFDAFDSourceSelection,
    metaFDVISourceSelection TypeMetaFDAFDSourceSelection,
    metaTCATCLTCOutputEmbed OnOffValue,
    metaTCATCLTCOutputLine TypeMetaFDAFDOutputLine,
    metaTCATCLTCOutputInsertGPI OnOffValue,
    metaTCATCLTCOutputStatus TypeMetaFDAFDOutputStatus,
    metaTCATCVITCOutputEmbed OnOffValue,
    metaTCATCVITCOutputLine TypeMetaFDAFDOutputLine,
    metaTCATCVITCOutputInsertGPI OnOffValue,
    metaTCATCVITCOutputStatus TypeMetaFDAFDOutputStatus,
    metaTCDVITCInputStatus TypeMetaTCDVITCInputStatus,
    metaTCDVITCInputLine525A TypeMetaTCDVITCInputLine525A,
    metaTCDVITCInputLine525B TypeMetaTCDVITCInputLine525A,
    metaTCDVITCInputLine625A TypeMetaTCDVITCInputLine625A,
    metaTCDVITCInputLine625B TypeMetaTCDVITCInputLine625A,
    metaTCDVITCInputLineDetect OnOffValue,
    metaTCDVITCInputDelete OnOffValue,
    metaTCDVITCOutputEmbed OnOffValue,
    metaTCDVITCOutputLine525A TypeMetaTCDVITCInputLine525A,
    metaTCDVITCOutputLine525B TypeMetaTCDVITCInputLine525A,
    metaTCDVITCOutputLine625A TypeMetaTCDVITCInputLine625A,
    metaTCDVITCOutputLine625B TypeMetaTCDVITCInputLine625A,
    metaTCDVITCOutputInsertGPI OnOffValue,
    metaTCDVITCOutputStatus TypeMetaFDAFDOutputStatus,
    metaTCDVITCAInputStatus TypeMetaFDWSSInputStatus,
    metaTCDVITCAOutputStatus TypeMetaFDAFDOutputStatus,
    metaTCDVITCBInputStatus TypeMetaFDWSSInputStatus,
    metaTCDVITCBOutputStatus TypeMetaFDAFDOutputStatus,
    metaTCOutputLineAuto OnOffValue,
    metaTCBurnIn OnOffValue,
    metaTCBurnInStatus TypeMetaFDWSSInputStatus,
    metaTCBurnInVerticalPos Integer32,
    metaTCBurnInHorizontalPos Integer32,
    inAes1 TypeInAes1,
    inAes2 TypeInAes1,
    inAudioStatus11 TypeInAes1,
    inAudioStatus12 TypeInAes1,
    inAudioStatus21 TypeInAes1,
    inAudioStatus22 TypeInAes1,
    inGrp1 TypeInGrp1,
    inGrp2 TypeInGrp1,
    inGrp3 TypeInGrp1,
    inGrp4 TypeInGrp1,
    embedGroup1 OnOffValue,
    embedGroup2 OnOffValue,
    embedGroup3 OnOffValue,
    embedGroup4 OnOffValue,
    sampleRateConversion1 TypeSampleRateConversion1,
    sampleRateConversion2 TypeSampleRateConversion1,
    sourceEmbAESStereo112 TypeSourceEmbAESStereo112,
    sourceEmbAES11 TypeSourceEmbAES11,
    sourceEmbAES12 TypeSourceEmbAES11,
    sourceEmbAESStereo134 TypeSourceEmbAESStereo112,
    sourceEmbAES13 TypeSourceEmbAES11,
    sourceEmbAES14 TypeSourceEmbAES11,
    sourceEmbAESStereo212 TypeSourceEmbAESStereo112,
    sourceEmbAES21 TypeSourceEmbAES11,
    sourceEmbAES22 TypeSourceEmbAES11,
    sourceEmbAESStereo234 TypeSourceEmbAESStereo112,
    sourceEmbAES23 TypeSourceEmbAES11,
    sourceEmbAES24 TypeSourceEmbAES11,
    sourceEmbAESStereo312 TypeSourceEmbAESStereo112,
    sourceEmbAES31 TypeSourceEmbAES11,
    sourceEmbAES32 TypeSourceEmbAES11,
    sourceEmbAESStereo334 TypeSourceEmbAESStereo112,
    sourceEmbAES33 TypeSourceEmbAES11,
    sourceEmbAES34 TypeSourceEmbAES11,
    sourceEmbAESStereo412 TypeSourceEmbAESStereo112,
    sourceEmbAES41 TypeSourceEmbAES11,
    sourceEmbAES42 TypeSourceEmbAES11,
    sourceEmbAESStereo434 TypeSourceEmbAESStereo112,
    sourceEmbAES43 TypeSourceEmbAES11,
    sourceEmbAES44 TypeSourceEmbAES11,
    testToneFrequency TypeTestToneFrequency,
    embedBits1 TypeEmbedBits1,
    embedBits2 TypeEmbedBits1,
    embedBits3 TypeEmbedBits1,
    embedBits4 TypeEmbedBits1,
    fSLevelInput TypeFSLevelInput,
    cSBTransSDTV OnOffValue,
    sourceAESOut11 TypeSourceAESOut11,
    sourceAESOut12 TypeSourceAESOut11,
    sourceAESOut21 TypeSourceAESOut11,
    sourceAESOut22 TypeSourceAESOut11,
    vFlag OnOffValue,
    audioContentAES1 TypeAudioContentAES1,
    audioContentAES2 TypeAudioContentAES1,
    audioContentStatusAES1 TypeAudioContentStatusAES1,
    audioContentStatusAES2 TypeAudioContentStatusAES1,
    aESPortAssignment1 TypeAESPortAssignment1,
    aESPortAssignment2 TypeAESPortAssignment1,
    referenceLock TypeReferenceLock,
    referenceStatus TypeAVidInputStatus,
    referenceSource TypeReferenceSource,
    freqPreselect TypeFreqPreselect,
    freq TypeFreq,
    inputToRefTolerance OnOffValue,
    syncMode1 TypeSyncMode1,
    inputFreezeVideo1 TypeInputFreezeVideo1,
    syncVideoIn1 OnOffValue,
    out1TotalProcTime FixedPointValue3,
    out1ApertureEnable OnOffValue,
    out1ApertureLevel Integer32,
    out1HFlip OnOffValue,
    out1Gain Integer32,
    out1Saturation Integer32,
    out1BlackLevel FixedPointValue1,
    out1Hue FixedPointValue1,
    out1TestPatternSelect TypeOut1TestPatternSelect,
    out1TestPatternStd TypeOut1TestPatternStd,
    out1TestPatternOn OnOffValue,
    out1CSC TypeOut1CSC,
    out1CSCMode TypeOut1CSCMode,
    out1IfNoInput TypeOut1IfNoInput,
    out1ClipHeadroom OnOffValue,
    out1FreezeMode TypeOut1FreezeMode,
    audioGain1L FixedPointValue1,
    audioMute1L TypeAudioMute1L,
    audioInvert1L TypeAudioInvert1L,
    audioMixDown1L OnOffValue,
    audioSilence1L TypeAudioSilence1L,
    audioOverload1L TypeAudioOverload1L,
    audioTestTone1L OnOffValue,
    audioGain1R FixedPointValue1,
    audioMute1R TypeAudioMute1L,
    audioInvert1R TypeAudioInvert1L,
    audioMixDown1R OnOffValue,
    audioSilence1R TypeAudioSilence1L,
    audioOverload1R TypeAudioOverload1L,
    audioTestTone1R OnOffValue,
    audioGain2L FixedPointValue1,
    audioMute2L TypeAudioMute1L,
    audioInvert2L TypeAudioInvert1L,
    audioMixDown2L OnOffValue,
    audioSilence2L TypeAudioSilence1L,
    audioOverload2L TypeAudioOverload1L,
    audioTestTone2L OnOffValue,
    audioGain2R FixedPointValue1,
    audioMute2R TypeAudioMute1L,
    audioInvert2R TypeAudioInvert1L,
    audioMixDown2R OnOffValue,
    audioSilence2R TypeAudioSilence1L,
    audioOverload2R TypeAudioOverload1L,
    audioTestTone2R OnOffValue,
    audioGain3L FixedPointValue1,
    audioMute3L TypeAudioMute1L,
    audioInvert3L TypeAudioInvert1L,
    audioMixDown3L OnOffValue,
    audioSilence3L TypeAudioSilence1L,
    audioOverload3L TypeAudioOverload1L,
    audioTestTone3L OnOffValue,
    audioGain3R FixedPointValue1,
    audioMute3R TypeAudioMute1L,
    audioInvert3R TypeAudioInvert1L,
    audioMixDown3R OnOffValue,
    audioSilence3R TypeAudioSilence1L,
    audioOverload3R TypeAudioOverload1L,
    audioTestTone3R OnOffValue,
    audioGain4L FixedPointValue1,
    audioMute4L TypeAudioMute1L,
    audioInvert4L TypeAudioInvert1L,
    audioMixDown4L OnOffValue,
    audioSilence4L TypeAudioSilence1L,
    audioOverload4L TypeAudioOverload1L,
    audioTestTone4L OnOffValue,
    audioGain4R FixedPointValue1,
    audioMute4R TypeAudioMute1L,
    audioInvert4R TypeAudioInvert1L,
    audioMixDown4R OnOffValue,
    audioSilence4R TypeAudioSilence1L,
    audioOverload4R TypeAudioOverload1L,
    audioTestTone4R OnOffValue,
    writeToFlash TypeWriteToFlash,
    backpanelStatus TypeBackpanelStatus,
    aVidComponentsGainY Integer32,
    aVidComponentsGainCr Integer32,
    aVidComponentsGainCb Integer32,
    aVidComponentsOffsetY Integer32,
    aVidComponentsOffsetCr Integer32,
    aVidComponentsOffsetCb Integer32,
    metaFDWSSFollowInput OnOffValue,
    out1VBlank OnOffValue,
    eventVideoInput1NoInput OnOffValue,
    eventAudioInput3LNoInput OnOffValue,
    eventAudioInput3RNoInput OnOffValue,
    eventAudioInput4LNoInput OnOffValue,
    eventAudioInput4RNoInput OnOffValue,
    eventAESInput1NoInput OnOffValue,
    eventAESInput2NoInput OnOffValue,
    eventEmbedderMissingInput OnOffValue,
    eventReferenceNoInput OnOffValue,
    eventCouldnotlocktoReference OnOffValue,
    eventPrimaryPowermissing OnOffValue,
    eventRedundantPowermissing OnOffValue,
    eventFanFailure OnOffValue,
    eventVideoInput1NoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventAudioInput1LNoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventAudioInput1RNoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventAudioInput2LNoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventAudioInput2RNoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventAudioInput3LNoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventAudioInput3RNoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventAudioInput4LNoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventAudioInput4RNoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventAESInput1NoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventAESInput2NoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventEmbedderMissingInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventReferenceNoInputSNMP TypeEventVideoInput1NoInputSNMP,
    eventCouldnotlocktoReferenceSNMP TypeEventVideoInput1NoInputSNMP,
    eventPrimaryPowermissingSNMP TypeEventVideoInput1NoInputSNMP,
    eventRedundantPowermissingSNMP TypeEventVideoInput1NoInputSNMP,
    eventFanFailureSNMP TypeEventVideoInput1NoInputSNMP,
    crossBarAudioOutEmbAES DisplayString,
    crossBarAudioOutAES DisplayString,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of CMX5710"
    ::= { sw688 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        lock,
        locate,
        statusColor,
        statusColorRGB,
        statusText,
        boardID,
        eventVideoInputNoInput,
        eventVideoInputstandarderror,
        eventAudioInput1LNoInput,
        eventAudioInput1RNoInput,
        eventAudioInput2LNoInput,
        eventAudioInput2RNoInput,
        eventAudioInput1Overload,
        eventAudioInput2Overload,
        aVidInputChannel,
        aVidInputStatus,
        inStandard,
        aVidOutputStatus,
        aVidVIDSEL,
        aVidVIDSELPED,
        aVidVIDSELStatus,
        aVidINSEL,
        aVidANTIALIASGY,
        aVidANTIALIASRV,
        aVidANTIALIASBU,
        aVidOFSEL,
        aVidCON,
        aVidSAT,
        aVidBRI,
        aVidHUE,
        aVidLAGC,
        aVidLAGT,
        aVidLMG,
        aVidCAGC,
        aVidCAGT,
        aVidCGM,
        aVidCTI,
        aVidYCMN,
        aVidCCM,
        aVidYSFM,
        aVidCSFM,
        aVidPWUPD,
        aVidCKE,
        aVidVBIEN,
        aVidBLCVBI,
        aVidfirstActiveLine,
        aVidsecondActiveLine,
        aVidnoiseFilterThreshold,
        aVidBETACAM,
        aVidRANGE,
        aVidCOR,
        aVidcombPreFilt,
        aVidYPM,
        aVidnoiseFilter,
        aVidGainCr,
        aVidGainCb,
        aVidOffsetCr,
        aVidOffsetCb,
        outStandard,
        refPLL2700Lock,
        refPLL74xLock,
        delayVideoMinMode,
        delayVideoUserMode,
        delayVideoFrames,
        delayVideoLines,
        delayVideoPixels,
        delayVideoTotalMs,
        delayAudioSDIOutGang,
        delayAudioSDIIn11,
        delayAudioSDIIn12,
        delayAudioSDIIn21,
        delayAudioSDIIn22,
        delayAudioSDIIn31,
        delayAudioSDIIn32,
        delayAudioSDIIn41,
        delayAudioSDIIn42,
        delayAudioSDIOut11,
        delayAudioSDIOut12,
        delayAudioSDIOut21,
        delayAudioSDIOut22,
        delayAudioSDIOut31,
        delayAudioSDIOut32,
        delayAudioSDIOut41,
        delayAudioSDIOut42,
        delayAudioAESOutGang,
        delayAudioAESIn1,
        delayAudioAESIn2,
        delayAudioAESOut1,
        delayAudioAESOut2,
        delayAudioAnalogIn1,
        delayAudioAnalogIn2,
        delayAudioAnalogOut1,
        delayAudioAnalogOut2,
        metaLineDeletionField1,
        metaLineDeletionField2,
        metaFDWSSInputStatus,
        metaFDWSSInputValue,
        metaFDWSSInputDelete,
        metaFDAFDOutputLine,
        metaFDAFDOutputLineAuto,
        metaFDAFDInsert,
        metaFDWSSInsert,
        metaFDVIInsert,
        metaFDAFDOutputStatus,
        metaFDWSSOutputStatus,
        metaFDVIOutputStatus,
        metaFDAFDOutputValue,
        metaFDWSSOutputValue,
        metaFDVIOutputValue,
        metaFDAFDSourceSelection,
        metaFDWSSSourceSelection,
        metaFDVISourceSelection,
        metaTCATCLTCOutputEmbed,
        metaTCATCLTCOutputLine,
        metaTCATCLTCOutputInsertGPI,
        metaTCATCLTCOutputStatus,
        metaTCATCVITCOutputEmbed,
        metaTCATCVITCOutputLine,
        metaTCATCVITCOutputInsertGPI,
        metaTCATCVITCOutputStatus,
        metaTCDVITCInputStatus,
        metaTCDVITCInputLine525A,
        metaTCDVITCInputLine525B,
        metaTCDVITCInputLine625A,
        metaTCDVITCInputLine625B,
        metaTCDVITCInputLineDetect,
        metaTCDVITCInputDelete,
        metaTCDVITCOutputEmbed,
        metaTCDVITCOutputLine525A,
        metaTCDVITCOutputLine525B,
        metaTCDVITCOutputLine625A,
        metaTCDVITCOutputLine625B,
        metaTCDVITCOutputInsertGPI,
        metaTCDVITCOutputStatus,
        metaTCDVITCAInputStatus,
        metaTCDVITCAOutputStatus,
        metaTCDVITCBInputStatus,
        metaTCDVITCBOutputStatus,
        metaTCOutputLineAuto,
        metaTCBurnIn,
        metaTCBurnInStatus,
        metaTCBurnInVerticalPos,
        metaTCBurnInHorizontalPos,
        inAes1,
        inAes2,
        inAudioStatus11,
        inAudioStatus12,
        inAudioStatus21,
        inAudioStatus22,
        inGrp1,
        inGrp2,
        inGrp3,
        inGrp4,
        embedGroup1,
        embedGroup2,
        embedGroup3,
        embedGroup4,
        sampleRateConversion1,
        sampleRateConversion2,
        sourceEmbAESStereo112,
        sourceEmbAES11,
        sourceEmbAES12,
        sourceEmbAESStereo134,
        sourceEmbAES13,
        sourceEmbAES14,
        sourceEmbAESStereo212,
        sourceEmbAES21,
        sourceEmbAES22,
        sourceEmbAESStereo234,
        sourceEmbAES23,
        sourceEmbAES24,
        sourceEmbAESStereo312,
        sourceEmbAES31,
        sourceEmbAES32,
        sourceEmbAESStereo334,
        sourceEmbAES33,
        sourceEmbAES34,
        sourceEmbAESStereo412,
        sourceEmbAES41,
        sourceEmbAES42,
        sourceEmbAESStereo434,
        sourceEmbAES43,
        sourceEmbAES44,
        testToneFrequency,
        embedBits1,
        embedBits2,
        embedBits3,
        embedBits4,
        fSLevelInput,
        cSBTransSDTV,
        sourceAESOut11,
        sourceAESOut12,
        sourceAESOut21,
        sourceAESOut22,
        vFlag,
        audioContentAES1,
        audioContentAES2,
        audioContentStatusAES1,
        audioContentStatusAES2,
        aESPortAssignment1,
        aESPortAssignment2,
        referenceLock,
        referenceStatus,
        referenceSource,
        freqPreselect,
        freq,
        inputToRefTolerance,
        syncMode1,
        inputFreezeVideo1,
        syncVideoIn1,
        out1TotalProcTime,
        out1ApertureEnable,
        out1ApertureLevel,
        out1HFlip,
        out1Gain,
        out1Saturation,
        out1BlackLevel,
        out1Hue,
        out1TestPatternSelect,
        out1TestPatternStd,
        out1TestPatternOn,
        out1CSC,
        out1CSCMode,
        out1IfNoInput,
        out1ClipHeadroom,
        out1FreezeMode,
        audioGain1L,
        audioMute1L,
        audioInvert1L,
        audioMixDown1L,
        audioSilence1L,
        audioOverload1L,
        audioTestTone1L,
        audioGain1R,
        audioMute1R,
        audioInvert1R,
        audioMixDown1R,
        audioSilence1R,
        audioOverload1R,
        audioTestTone1R,
        audioGain2L,
        audioMute2L,
        audioInvert2L,
        audioMixDown2L,
        audioSilence2L,
        audioOverload2L,
        audioTestTone2L,
        audioGain2R,
        audioMute2R,
        audioInvert2R,
        audioMixDown2R,
        audioSilence2R,
        audioOverload2R,
        audioTestTone2R,
        audioGain3L,
        audioMute3L,
        audioInvert3L,
        audioMixDown3L,
        audioSilence3L,
        audioOverload3L,
        audioTestTone3L,
        audioGain3R,
        audioMute3R,
        audioInvert3R,
        audioMixDown3R,
        audioSilence3R,
        audioOverload3R,
        audioTestTone3R,
        audioGain4L,
        audioMute4L,
        audioInvert4L,
        audioMixDown4L,
        audioSilence4L,
        audioOverload4L,
        audioTestTone4L,
        audioGain4R,
        audioMute4R,
        audioInvert4R,
        audioMixDown4R,
        audioSilence4R,
        audioOverload4R,
        audioTestTone4R,
        writeToFlash,
        backpanelStatus,
        aVidComponentsGainY,
        aVidComponentsGainCr,
        aVidComponentsGainCb,
        aVidComponentsOffsetY,
        aVidComponentsOffsetCr,
        aVidComponentsOffsetCb,
        metaFDWSSFollowInput,
        out1VBlank,
        eventVideoInput1NoInput,
        eventAudioInput3LNoInput,
        eventAudioInput3RNoInput,
        eventAudioInput4LNoInput,
        eventAudioInput4RNoInput,
        eventAESInput1NoInput,
        eventAESInput2NoInput,
        eventEmbedderMissingInput,
        eventReferenceNoInput,
        eventCouldnotlocktoReference,
        eventPrimaryPowermissing,
        eventRedundantPowermissing,
        eventFanFailure,
        eventVideoInput1NoInputSNMP,
        eventAudioInput1LNoInputSNMP,
        eventAudioInput1RNoInputSNMP,
        eventAudioInput2LNoInputSNMP,
        eventAudioInput2RNoInputSNMP,
        eventAudioInput3LNoInputSNMP,
        eventAudioInput3RNoInputSNMP,
        eventAudioInput4LNoInputSNMP,
        eventAudioInput4RNoInputSNMP,
        eventAESInput1NoInputSNMP,
        eventAESInput2NoInputSNMP,
        eventEmbedderMissingInputSNMP,
        eventReferenceNoInputSNMP,
        eventCouldnotlocktoReferenceSNMP,
        eventPrimaryPowermissingSNMP,
        eventRedundantPowermissingSNMP,
        eventFanFailureSNMP,
        crossBarAudioOutEmbAES,
        crossBarAudioOutAES,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END