-- Machine generated MIB file, do not edit!
--
-- MIB file for DVD5002, type code 08.82, software label 85
-- Generated on Tuesday, 09-Aug-16 14:24:09 UTC
-- CVS $Id: DVD5002_0882_sw85.mib,v 1.11 2016/08/09 14:24:11 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

DVD5002-0882-sw85-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

dvd5002-0882-sw85 MODULE-IDENTITY
    LAST-UPDATED "201608091424Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for DVD5002, type code 08.82, software label 85"
    REVISION "201608091424Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 2178085 }

dvd5002-0882 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type DVD5002"
    ::= { products 2178 }

sw85 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 85"
    ::= { dvd5002-0882 85 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeCfg ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        singleChannel(0),
        dualChannel(1)
    }

TypeIn1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        n525(1),
        n625(2),
        invalid(3),
        invalidX(4)
    }

TypeAVid1Assign ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input1(0),
        input2(1)
    }

TypeAVid2Assign ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input2(0),
        input1(1)
    }

TypeAVid1TestPattern ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        colorbar(1)
    }

TypeAVid1TestPatternStd ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        followLastInput(0),
        n525(1),
        n625(2)
    }

TypeAVid1antiAliasCVBS ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        flatOn(1),
        enhanced1(2),
        enhanced2(3),
        enhanced3(4)
    }

TypeAVid1YLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        smpte(0),
        betacam(1)
    }

TypeAVid1UVLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n700mV(0),
        n1000mV(1)
    }

TypeAVid1Limiter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        disable(0),
        n75IRE(1)
    }

TypeAVid1BlackLevelAdjust ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        fixed(0),
        adjust(1)
    }

TypeAVid1LuminanceFilter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lowPass(0),
        notchFilter(1),
        lowPassX(2),
        notchFilterX(3),
        extendedMode(4),
        cif(5)
    }

TypeAVid1ChrominanceFilter ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n065MHzLP(0),
        n100MHzLP(1),
        n130MHzLP(2),
        n200MHzLP(3),
        cif(4),
        qcif(5)
    }

TypeAVid1blankVBI ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        transparent(0),
        blank(1)
    }

TypeAVid1chromCtl ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeAVid1activeLineDuration ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        cCIR601(0),
        iTUB470(1)
    }

TypeAVid1lumaDelay ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0Ns(0),
        n74Ns(1),
        n148Ns(2),
        n222Ns(3)
    }

TypeEventlostinput1SNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventlostinput1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: lost input 1 (input signal 1 can not be detected)"
    ::= { paramEntry 14 }

eventlostinput2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: lost input 2 (input signal 2 can not be detected)"
    ::= { paramEntry 15 }

eventinvalidinput1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: invalid input 1 (PLL on input 1 could not lock on input signal)"
    ::= { paramEntry 16 }

eventinvalidinput2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: invalid input 2 (PLL on input 2 could not lock on input signal)"
    ::= { paramEntry 17 }

event525input1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 525 input 1 (525 video on input 1)"
    ::= { paramEntry 18 }

event525input2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 525 input 2 (525 video on input 2)"
    ::= { paramEntry 19 }

cfg OBJECT-TYPE
    SYNTAX TypeCfg
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Configure general mode of operation: 1*1->8 / 2*1->4"
    ::= { paramEntry 20 }

in1 OBJECT-TYPE
    SYNTAX TypeIn1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status channel 1"
    ::= { paramEntry 21 }

in2 OBJECT-TYPE
    SYNTAX TypeIn1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status channel 2"
    ::= { paramEntry 22 }

reclock1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select SDI reclocking on input 1"
    ::= { paramEntry 23 }

reclock2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select SDI reclocking on input 2"
    ::= { paramEntry 24 }

aVid1Assign OBJECT-TYPE
    SYNTAX TypeAVid1Assign
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "assign analog output 1 to input 1/2"
    ::= { paramEntry 25 }

aVid2Assign OBJECT-TYPE
    SYNTAX TypeAVid2Assign
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "assign analog output 2 to input 1/2"
    ::= { paramEntry 26 }

aVid1TestPattern OBJECT-TYPE
    SYNTAX TypeAVid1TestPattern
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Test pattern on analog output 1"
    ::= { paramEntry 27 }

aVid2TestPattern OBJECT-TYPE
    SYNTAX TypeAVid1TestPattern
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Test pattern on analog output 2"
    ::= { paramEntry 28 }

aVidAutoTestPattern OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "auto test pattern when no input"
    ::= { paramEntry 29 }

aVid1TestPatternStd OBJECT-TYPE
    SYNTAX TypeAVid1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Test signal video standard for channel 1"
    ::= { paramEntry 30 }

aVid2TestPatternStd OBJECT-TYPE
    SYNTAX TypeAVid1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Test signal video standard for channel 2"
    ::= { paramEntry 31 }

aVid1antiAliasCVBS OBJECT-TYPE
    SYNTAX TypeAVid1antiAliasCVBS
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "anti alias filter (Component outputs)"
    ::= { paramEntry 32 }

aVid2antiAliasCVBS OBJECT-TYPE
    SYNTAX TypeAVid1antiAliasCVBS
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "anti alias filter (Component outputs)"
    ::= { paramEntry 33 }

aVid1Pedestal OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: add Pedestal (applies to NTSC/525 output format only)"
    ::= { paramEntry 34 }

aVid1YLevel OBJECT-TYPE
    SYNTAX TypeAVid1YLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: Gain Y level"
    ::= { paramEntry 35 }

aVid1UVLevel OBJECT-TYPE
    SYNTAX TypeAVid1UVLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: UV level"
    ::= { paramEntry 36 }

aVid1Limiter OBJECT-TYPE
    SYNTAX TypeAVid1Limiter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: luminance undershot limiter"
    ::= { paramEntry 37 }

aVid1Clip OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: luma saturation control (Clip)"
    ::= { paramEntry 38 }

aVid1BlackLevelAdjust OBJECT-TYPE
    SYNTAX TypeAVid1BlackLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: black level adjust"
    ::= { paramEntry 39 }

aVid1BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: Black Level"
    ::= { paramEntry 40 }

aVid1SharpnessAdjust OBJECT-TYPE
    SYNTAX TypeAVid1BlackLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: sharpness adjust (Note: setting this to ADJUST will set aVid1/LuminanceFilter to Extended"
    ::= { paramEntry 41 }

aVid1HueAdjust OBJECT-TYPE
    SYNTAX TypeAVid1BlackLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: hue adjust"
    ::= { paramEntry 42 }

aVid1LuminanceFilter OBJECT-TYPE
    SYNTAX TypeAVid1LuminanceFilter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: luminance filter (Note: setting this to anything but Extended will disable aVid1/SharpnessAdjust)"
    ::= { paramEntry 43 }

aVid1ChrominanceFilter OBJECT-TYPE
    SYNTAX TypeAVid1ChrominanceFilter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: chrominance filter"
    ::= { paramEntry 44 }

aVid1blankVBI OBJECT-TYPE
    SYNTAX TypeAVid1blankVBI
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: blank VBI (Vertical Blanking Interval)"
    ::= { paramEntry 45 }

aVid1chromCtl OBJECT-TYPE
    SYNTAX TypeAVid1chromCtl
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: disable chroma in output"
    ::= { paramEntry 46 }

aVid1burstCtrl OBJECT-TYPE
    SYNTAX TypeAVid1chromCtl
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: disable burst in output"
    ::= { paramEntry 47 }

aVid1activeLineDuration OBJECT-TYPE
    SYNTAX TypeAVid1activeLineDuration
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: active line duration"
    ::= { paramEntry 48 }

aVid1lumaDelay OBJECT-TYPE
    SYNTAX TypeAVid1lumaDelay
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 1: luma delay in [ns]"
    ::= { paramEntry 49 }

aVid2Pedestal OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: add Pedestal (applies to NTSC/525 output format only)"
    ::= { paramEntry 50 }

aVid2YLevel OBJECT-TYPE
    SYNTAX TypeAVid1YLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: Gain Y level"
    ::= { paramEntry 51 }

aVid2UVLevel OBJECT-TYPE
    SYNTAX TypeAVid1UVLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: UV level"
    ::= { paramEntry 52 }

aVid2Limiter OBJECT-TYPE
    SYNTAX TypeAVid1Limiter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: luminance undershot limiter"
    ::= { paramEntry 53 }

aVid2Clip OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: luma saturation control (Clip)"
    ::= { paramEntry 54 }

aVid2BlackLevelAdjust OBJECT-TYPE
    SYNTAX TypeAVid1BlackLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: black level adjust"
    ::= { paramEntry 55 }

aVid2BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: Black Level"
    ::= { paramEntry 56 }

aVid2SharpnessAdjust OBJECT-TYPE
    SYNTAX TypeAVid1BlackLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: sharpness adjust (Note: setting this to ADJUST will set aVid2/LuminanceFilter to Extended"
    ::= { paramEntry 57 }

aVid2HueAdjust OBJECT-TYPE
    SYNTAX TypeAVid1BlackLevelAdjust
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: hue adjust"
    ::= { paramEntry 58 }

aVid2LuminanceFilter OBJECT-TYPE
    SYNTAX TypeAVid1LuminanceFilter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: luminance filter (Note: setting this to anything but Extended will disable aVid2/SharpnessAdjust)"
    ::= { paramEntry 59 }

aVid2ChrominanceFilter OBJECT-TYPE
    SYNTAX TypeAVid1ChrominanceFilter
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: chrominance filter"
    ::= { paramEntry 60 }

aVid2blankVBI OBJECT-TYPE
    SYNTAX TypeAVid1blankVBI
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: blank VBI (Vertical Blanking Interval)"
    ::= { paramEntry 61 }

aVid2chromCtl OBJECT-TYPE
    SYNTAX TypeAVid1chromCtl
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: disable chroma in output"
    ::= { paramEntry 62 }

aVid2burstCtrl OBJECT-TYPE
    SYNTAX TypeAVid1chromCtl
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: disable burst in output"
    ::= { paramEntry 63 }

aVid2activeLineDuration OBJECT-TYPE
    SYNTAX TypeAVid1activeLineDuration
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: active line duration"
    ::= { paramEntry 64 }

aVid2lumaDelay OBJECT-TYPE
    SYNTAX TypeAVid1lumaDelay
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Output 2: luma delay in [ns]"
    ::= { paramEntry 65 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 66 }

eventlostinput1SNMP OBJECT-TYPE
    SYNTAX TypeEventlostinput1SNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: lost input 1 (input signal 1 can not be detected)"
    ::= { paramEntry 67 }

eventlostinput2SNMP OBJECT-TYPE
    SYNTAX TypeEventlostinput1SNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: lost input 2 (input signal 2 can not be detected)"
    ::= { paramEntry 68 }

eventinvalidinput1SNMP OBJECT-TYPE
    SYNTAX TypeEventlostinput1SNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: invalid input 1 (PLL on input 1 could not lock on input signal)"
    ::= { paramEntry 69 }

eventinvalidinput2SNMP OBJECT-TYPE
    SYNTAX TypeEventlostinput1SNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: invalid input 2 (PLL on input 2 could not lock on input signal)"
    ::= { paramEntry 70 }

event525input1SNMP OBJECT-TYPE
    SYNTAX TypeEventlostinput1SNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 525 input 1 (525 video on input 1)"
    ::= { paramEntry 71 }

event525input2SNMP OBJECT-TYPE
    SYNTAX TypeEventlostinput1SNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 525 input 2 (525 video on input 2)"
    ::= { paramEntry 72 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 73 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of DVD5002 parameters"
    ::= { sw85 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of DVD5002 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventlostinput1 OnOffValue,
    eventlostinput2 OnOffValue,
    eventinvalidinput1 OnOffValue,
    eventinvalidinput2 OnOffValue,
    event525input1 OnOffValue,
    event525input2 OnOffValue,
    cfg TypeCfg,
    in1 TypeIn1,
    in2 TypeIn1,
    reclock1 OnOffValue,
    reclock2 OnOffValue,
    aVid1Assign TypeAVid1Assign,
    aVid2Assign TypeAVid2Assign,
    aVid1TestPattern TypeAVid1TestPattern,
    aVid2TestPattern TypeAVid1TestPattern,
    aVidAutoTestPattern OnOffValue,
    aVid1TestPatternStd TypeAVid1TestPatternStd,
    aVid2TestPatternStd TypeAVid1TestPatternStd,
    aVid1antiAliasCVBS TypeAVid1antiAliasCVBS,
    aVid2antiAliasCVBS TypeAVid1antiAliasCVBS,
    aVid1Pedestal OnOffValue,
    aVid1YLevel TypeAVid1YLevel,
    aVid1UVLevel TypeAVid1UVLevel,
    aVid1Limiter TypeAVid1Limiter,
    aVid1Clip OnOffValue,
    aVid1BlackLevelAdjust TypeAVid1BlackLevelAdjust,
    aVid1BlackLevel FixedPointValue1,
    aVid1SharpnessAdjust TypeAVid1BlackLevelAdjust,
    aVid1HueAdjust TypeAVid1BlackLevelAdjust,
    aVid1LuminanceFilter TypeAVid1LuminanceFilter,
    aVid1ChrominanceFilter TypeAVid1ChrominanceFilter,
    aVid1blankVBI TypeAVid1blankVBI,
    aVid1chromCtl TypeAVid1chromCtl,
    aVid1burstCtrl TypeAVid1chromCtl,
    aVid1activeLineDuration TypeAVid1activeLineDuration,
    aVid1lumaDelay TypeAVid1lumaDelay,
    aVid2Pedestal OnOffValue,
    aVid2YLevel TypeAVid1YLevel,
    aVid2UVLevel TypeAVid1UVLevel,
    aVid2Limiter TypeAVid1Limiter,
    aVid2Clip OnOffValue,
    aVid2BlackLevelAdjust TypeAVid1BlackLevelAdjust,
    aVid2BlackLevel FixedPointValue1,
    aVid2SharpnessAdjust TypeAVid1BlackLevelAdjust,
    aVid2HueAdjust TypeAVid1BlackLevelAdjust,
    aVid2LuminanceFilter TypeAVid1LuminanceFilter,
    aVid2ChrominanceFilter TypeAVid1ChrominanceFilter,
    aVid2blankVBI TypeAVid1blankVBI,
    aVid2chromCtl TypeAVid1chromCtl,
    aVid2burstCtrl TypeAVid1chromCtl,
    aVid2activeLineDuration TypeAVid1activeLineDuration,
    aVid2lumaDelay TypeAVid1lumaDelay,
    boardID Integer32,
    eventlostinput1SNMP TypeEventlostinput1SNMP,
    eventlostinput2SNMP TypeEventlostinput1SNMP,
    eventinvalidinput1SNMP TypeEventlostinput1SNMP,
    eventinvalidinput2SNMP TypeEventlostinput1SNMP,
    event525input1SNMP TypeEventlostinput1SNMP,
    event525input2SNMP TypeEventlostinput1SNMP,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of DVD5002"
    ::= { sw85 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventlostinput1,
        eventlostinput2,
        eventinvalidinput1,
        eventinvalidinput2,
        event525input1,
        event525input2,
        cfg,
        in1,
        in2,
        reclock1,
        reclock2,
        aVid1Assign,
        aVid2Assign,
        aVid1TestPattern,
        aVid2TestPattern,
        aVidAutoTestPattern,
        aVid1TestPatternStd,
        aVid2TestPatternStd,
        aVid1antiAliasCVBS,
        aVid2antiAliasCVBS,
        aVid1Pedestal,
        aVid1YLevel,
        aVid1UVLevel,
        aVid1Limiter,
        aVid1Clip,
        aVid1BlackLevelAdjust,
        aVid1BlackLevel,
        aVid1SharpnessAdjust,
        aVid1HueAdjust,
        aVid1LuminanceFilter,
        aVid1ChrominanceFilter,
        aVid1blankVBI,
        aVid1chromCtl,
        aVid1burstCtrl,
        aVid1activeLineDuration,
        aVid1lumaDelay,
        aVid2Pedestal,
        aVid2YLevel,
        aVid2UVLevel,
        aVid2Limiter,
        aVid2Clip,
        aVid2BlackLevelAdjust,
        aVid2BlackLevel,
        aVid2SharpnessAdjust,
        aVid2HueAdjust,
        aVid2LuminanceFilter,
        aVid2ChrominanceFilter,
        aVid2blankVBI,
        aVid2chromCtl,
        aVid2burstCtrl,
        aVid2activeLineDuration,
        aVid2lumaDelay,
        boardID,
        eventlostinput1SNMP,
        eventlostinput2SNMP,
        eventinvalidinput1SNMP,
        eventinvalidinput2SNMP,
        event525input1SNMP,
        event525input2SNMP,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END