-- Machine generated MIB file, do not edit!
--
-- MIB file for DVD5480-HO, type code 08.E1, software label 952
-- Generated on Friday, 16-Jul-21 09:29:21 UTC
-- CVS $Id: DVD5480-HO_08e1_sw952.mib,v 1.1 2021/07/16 09:29:22 til Exp $
--
-- Copyright 2003-2021 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

DVD5480-HO-08e1-sw952-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

dvd5480-ho-08e1-sw952 MODULE-IDENTITY
    LAST-UPDATED "202107160929Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for DVD5480-HO, type code 08.E1, software label 952"
    REVISION "202107160929Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 2273952 }

dvd5480-ho-08e1 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type DVD5480-HO"
    ::= { products 2273 }

sw952 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 952"
    ::= { dvd5480-ho-08e1 952 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeEventPrimaryPowermissingSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

TypeInputStatus1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        missing(1),
        present(2),
        n270Mbps(3),
        n740Mbps(4),
        n15Gbps(5),
        n30Gbps(6),
        n6Gbps(7),
        n12Gbps(8)
    }

TypeTranscoderMode1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        demux(0),
        mux(1),
        bypass(2)
    }

TypeBypassSource11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        tR1(0),
        tR2(1),
        tR3(2),
        tR4(3),
        rX21(4),
        rX22(5),
        rX23(6),
        rX24(7),
        muxLoopback(8)
    }

TypeMuxSource11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        tR1(0),
        tR2(1),
        tR3(2),
        tR4(3),
        rX21(4),
        rX22(5),
        rX23(6),
        rX24(7)
    }

TypeBNCPortDirection1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input(0),
        output(1)
    }

TypeOutputSourceTR1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        transcoder11(0),
        transcoder13(1),
        transcoder21(2),
        transcoder23(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 8 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 9 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 10 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 11 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 12 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 13 }

eventPrimaryPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Primary Power missing"
    ::= { paramEntry 15 }

eventRedundantPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Redundant Power missing"
    ::= { paramEntry 16 }

eventSDIInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 1 No Input"
    ::= { paramEntry 17 }

eventSDIInput2NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 2 No Input"
    ::= { paramEntry 18 }

eventSDIInput3NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 3 No Input"
    ::= { paramEntry 19 }

eventSDIInput4NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 4 No Input"
    ::= { paramEntry 20 }

eventSDIInput5NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 5 No Input"
    ::= { paramEntry 21 }

eventSDIInput6NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 6 No Input"
    ::= { paramEntry 22 }

eventSDIInput7NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 7 No Input"
    ::= { paramEntry 23 }

eventSDIInput8NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 8 No Input"
    ::= { paramEntry 24 }

eventPrimaryPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Primary Power missing"
    ::= { paramEntry 25 }

eventRedundantPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Redundant Power missing"
    ::= { paramEntry 26 }

eventSDIInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 1 No Input"
    ::= { paramEntry 27 }

eventSDIInput2NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 2 No Input"
    ::= { paramEntry 28 }

eventSDIInput3NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 3 No Input"
    ::= { paramEntry 29 }

eventSDIInput4NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 4 No Input"
    ::= { paramEntry 30 }

eventSDIInput5NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 5 No Input"
    ::= { paramEntry 31 }

eventSDIInput6NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 6 No Input"
    ::= { paramEntry 32 }

eventSDIInput7NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 7 No Input"
    ::= { paramEntry 33 }

eventSDIInput8NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 8 No Input"
    ::= { paramEntry 34 }

sFPModuleType1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the type of detected SFP-Module 1. The SFP part number will be displayed if SFP Module is unknown."
    ::= { paramEntry 35 }

sFPModulePartNumber1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of used SFP Module"
    ::= { paramEntry 36 }

sFPModuleType2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the type of detected SFP-Module 2. The SFP part number will be displayed if SFP Module is unknown."
    ::= { paramEntry 37 }

sFPModulePartNumber2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of used SFP Module"
    ::= { paramEntry 38 }

sFPModuleType3 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the type of detected SFP-Module 3. The SFP part number will be displayed if SFP Module is unknown."
    ::= { paramEntry 39 }

sFPModulePartNumber3 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of used SFP Module"
    ::= { paramEntry 40 }

sFPModuleType4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the type of detected SFP-Module 4. The SFP part number will be displayed if SFP Module is unknown."
    ::= { paramEntry 41 }

sFPModulePartNumber4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of used SFP Module"
    ::= { paramEntry 42 }

inputStatus1 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status TR 1"
    ::= { paramEntry 43 }

inputStatus2 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status TR 2"
    ::= { paramEntry 44 }

inputStatus3 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status TR 3"
    ::= { paramEntry 45 }

inputStatus4 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status TR 4"
    ::= { paramEntry 46 }

inputStatus5 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status RX 2.1"
    ::= { paramEntry 47 }

inputBudgetOpt1 OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input budget on optical SDI input"
    ::= { paramEntry 48 }

inputStatus6 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status RX 2.2"
    ::= { paramEntry 49 }

inputBudgetOpt2 OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input budget on optical SDI input"
    ::= { paramEntry 50 }

inputStatus7 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status RX 2.3"
    ::= { paramEntry 51 }

inputBudgetOpt3 OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input budget on optical SDI input"
    ::= { paramEntry 52 }

inputStatus8 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status RX 2.4"
    ::= { paramEntry 53 }

inputBudgetOpt4 OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input budget on optical SDI input"
    ::= { paramEntry 54 }

outputStatus1 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status TR 1"
    ::= { paramEntry 55 }

outputStatus2 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status TR 2"
    ::= { paramEntry 56 }

outputStatus3 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status TR 3"
    ::= { paramEntry 57 }

outputStatus4 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status TR 4"
    ::= { paramEntry 58 }

outputStatus5 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status TX 2.1"
    ::= { paramEntry 59 }

outputStatus6 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status TX 2.2"
    ::= { paramEntry 60 }

outputStatus7 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status TX 2.3"
    ::= { paramEntry 61 }

outputStatus8 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status TX 2.4"
    ::= { paramEntry 62 }

transcoderMode1 OBJECT-TYPE
    SYNTAX TypeTranscoderMode1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Mode for Transcoder 1"
    ::= { paramEntry 63 }

transcoderMode2 OBJECT-TYPE
    SYNTAX TypeTranscoderMode1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Mode for Transcoder 2"
    ::= { paramEntry 64 }

bypassSource11 OBJECT-TYPE
    SYNTAX TypeBypassSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 1.1 Bypass Mode"
    ::= { paramEntry 65 }

bypassSource21 OBJECT-TYPE
    SYNTAX TypeBypassSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 2.1 Bypass Mode"
    ::= { paramEntry 66 }

muxSource11 OBJECT-TYPE
    SYNTAX TypeMuxSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 1.1 Mux Mode"
    ::= { paramEntry 67 }

muxSource21 OBJECT-TYPE
    SYNTAX TypeMuxSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 2.1 Mux Mode"
    ::= { paramEntry 68 }

transcoderStatus11 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Transcoder 1.1"
    ::= { paramEntry 69 }

transcoderStatus21 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Transcoder 2.1"
    ::= { paramEntry 70 }

bypassSource12 OBJECT-TYPE
    SYNTAX TypeBypassSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 1.2 Bypass Mode"
    ::= { paramEntry 71 }

bypassSource22 OBJECT-TYPE
    SYNTAX TypeBypassSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 2.2 Bypass Mode"
    ::= { paramEntry 72 }

muxSource12 OBJECT-TYPE
    SYNTAX TypeMuxSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 1.2 Mux Mode"
    ::= { paramEntry 73 }

muxSource22 OBJECT-TYPE
    SYNTAX TypeMuxSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 2.2 Mux Mode"
    ::= { paramEntry 74 }

transcoderStatus12 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Transcoder 1.2"
    ::= { paramEntry 75 }

transcoderStatus22 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Transcoder 2.2"
    ::= { paramEntry 76 }

bypassSource13 OBJECT-TYPE
    SYNTAX TypeBypassSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 1.3 Bypass Mode"
    ::= { paramEntry 77 }

bypassSource23 OBJECT-TYPE
    SYNTAX TypeBypassSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 2.3 Bypass Mode"
    ::= { paramEntry 78 }

muxSource13 OBJECT-TYPE
    SYNTAX TypeMuxSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 1.3 Mux Mode"
    ::= { paramEntry 79 }

muxSource23 OBJECT-TYPE
    SYNTAX TypeMuxSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 2.3 Mux Mode"
    ::= { paramEntry 80 }

transcoderStatus13 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Transcoder 1.3"
    ::= { paramEntry 81 }

transcoderStatus23 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Transcoder 2.3"
    ::= { paramEntry 82 }

bypassSource14 OBJECT-TYPE
    SYNTAX TypeBypassSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 1.4 Bypass Mode"
    ::= { paramEntry 83 }

bypassSource24 OBJECT-TYPE
    SYNTAX TypeBypassSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 2.4 Bypass Mode"
    ::= { paramEntry 84 }

muxSource14 OBJECT-TYPE
    SYNTAX TypeMuxSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 1.4 Mux Mode"
    ::= { paramEntry 85 }

muxSource24 OBJECT-TYPE
    SYNTAX TypeMuxSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 2.4 Mux Mode"
    ::= { paramEntry 86 }

transcoderStatus14 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Transcoder 1.4"
    ::= { paramEntry 87 }

transcoderStatus24 OBJECT-TYPE
    SYNTAX TypeInputStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of Transcoder 2.4"
    ::= { paramEntry 88 }

demuxSource1 OBJECT-TYPE
    SYNTAX TypeBypassSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 1 Demux Mode"
    ::= { paramEntry 89 }

demuxSource2 OBJECT-TYPE
    SYNTAX TypeBypassSource11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Transcoder 2 Demux Mode"
    ::= { paramEntry 90 }

bNCPortDirection1 OBJECT-TYPE
    SYNTAX TypeBNCPortDirection1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Port Direction of BNC Input 1"
    ::= { paramEntry 91 }

bNCPortDirection2 OBJECT-TYPE
    SYNTAX TypeBNCPortDirection1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Port Direction of BNC Input 2"
    ::= { paramEntry 92 }

bNCPortDirection3 OBJECT-TYPE
    SYNTAX TypeBNCPortDirection1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Port Direction of BNC Input 3"
    ::= { paramEntry 93 }

bNCPortDirection4 OBJECT-TYPE
    SYNTAX TypeBNCPortDirection1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Port Direction of BNC Input 4"
    ::= { paramEntry 94 }

hardwareMainVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Main Version"
    ::= { paramEntry 95 }

hardwareMainBoard OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Main Board"
    ::= { paramEntry 96 }

hardwareMainHWIndex OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Main HW Index"
    ::= { paramEntry 97 }

hardwareMainChangeIndex OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Main Change Index"
    ::= { paramEntry 98 }

hardwareMainSerial OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Main Serial"
    ::= { paramEntry 99 }

hardwareMainDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Main Date"
    ::= { paramEntry 100 }

hardwareBackVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Back Version"
    ::= { paramEntry 101 }

hardwareBackBoard OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Back Board"
    ::= { paramEntry 102 }

hardwareBackHWIndex OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Back HW Index"
    ::= { paramEntry 103 }

hardwareBackChangeIndex OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Back Change Index"
    ::= { paramEntry 104 }

hardwareBackSerial OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Back Serial"
    ::= { paramEntry 105 }

hardwareBackDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Back Date"
    ::= { paramEntry 106 }

outputSourceTR1 OBJECT-TYPE
    SYNTAX TypeOutputSourceTR1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Output TR1"
    ::= { paramEntry 107 }

outputSourceTR3 OBJECT-TYPE
    SYNTAX TypeOutputSourceTR1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Output TR3"
    ::= { paramEntry 108 }

outputSourceTX21 OBJECT-TYPE
    SYNTAX TypeOutputSourceTR1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Output TX2.1"
    ::= { paramEntry 109 }

outputSourceTX23 OBJECT-TYPE
    SYNTAX TypeOutputSourceTR1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set Source for Output TX2.3"
    ::= { paramEntry 110 }

eventOpticalSDIInput1Overload OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Optical SDI Input 1 Overload"
    ::= { paramEntry 111 }

eventOpticalSDIInput2Overload OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Optical SDI Input 2 Overload"
    ::= { paramEntry 112 }

eventOpticalSDIInput3Overload OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Optical SDI Input 3 Overload"
    ::= { paramEntry 113 }

eventOpticalSDIInput4Overload OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Optical SDI Input 4 Overload"
    ::= { paramEntry 114 }

eventOpticalSDIInput1OverloadSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Optical SDI Input 1 Overload"
    ::= { paramEntry 115 }

eventOpticalSDIInput2OverloadSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Optical SDI Input 2 Overload"
    ::= { paramEntry 116 }

eventOpticalSDIInput3OverloadSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Optical SDI Input 3 Overload"
    ::= { paramEntry 117 }

eventOpticalSDIInput4OverloadSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Optical SDI Input 4 Overload"
    ::= { paramEntry 118 }

eventSFPStickinvaliddata OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: SFP Stick invalid data"
    ::= { paramEntry 119 }

eventSFPStickinvaliddataSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SFP Stick invalid data"
    ::= { paramEntry 120 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of DVD5480-HO parameters"
    ::= { sw952 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of DVD5480-HO parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    boardID Integer32,
    eventPrimaryPowermissing OnOffValue,
    eventRedundantPowermissing OnOffValue,
    eventSDIInput1NoInput OnOffValue,
    eventSDIInput2NoInput OnOffValue,
    eventSDIInput3NoInput OnOffValue,
    eventSDIInput4NoInput OnOffValue,
    eventSDIInput5NoInput OnOffValue,
    eventSDIInput6NoInput OnOffValue,
    eventSDIInput7NoInput OnOffValue,
    eventSDIInput8NoInput OnOffValue,
    eventPrimaryPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventRedundantPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput1NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput2NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput3NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput4NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput5NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput6NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput7NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput8NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    sFPModuleType1 DisplayString,
    sFPModulePartNumber1 DisplayString,
    sFPModuleType2 DisplayString,
    sFPModulePartNumber2 DisplayString,
    sFPModuleType3 DisplayString,
    sFPModulePartNumber3 DisplayString,
    sFPModuleType4 DisplayString,
    sFPModulePartNumber4 DisplayString,
    inputStatus1 TypeInputStatus1,
    inputStatus2 TypeInputStatus1,
    inputStatus3 TypeInputStatus1,
    inputStatus4 TypeInputStatus1,
    inputStatus5 TypeInputStatus1,
    inputBudgetOpt1 FixedPointValue1,
    inputStatus6 TypeInputStatus1,
    inputBudgetOpt2 FixedPointValue1,
    inputStatus7 TypeInputStatus1,
    inputBudgetOpt3 FixedPointValue1,
    inputStatus8 TypeInputStatus1,
    inputBudgetOpt4 FixedPointValue1,
    outputStatus1 TypeInputStatus1,
    outputStatus2 TypeInputStatus1,
    outputStatus3 TypeInputStatus1,
    outputStatus4 TypeInputStatus1,
    outputStatus5 TypeInputStatus1,
    outputStatus6 TypeInputStatus1,
    outputStatus7 TypeInputStatus1,
    outputStatus8 TypeInputStatus1,
    transcoderMode1 TypeTranscoderMode1,
    transcoderMode2 TypeTranscoderMode1,
    bypassSource11 TypeBypassSource11,
    bypassSource21 TypeBypassSource11,
    muxSource11 TypeMuxSource11,
    muxSource21 TypeMuxSource11,
    transcoderStatus11 TypeInputStatus1,
    transcoderStatus21 TypeInputStatus1,
    bypassSource12 TypeBypassSource11,
    bypassSource22 TypeBypassSource11,
    muxSource12 TypeMuxSource11,
    muxSource22 TypeMuxSource11,
    transcoderStatus12 TypeInputStatus1,
    transcoderStatus22 TypeInputStatus1,
    bypassSource13 TypeBypassSource11,
    bypassSource23 TypeBypassSource11,
    muxSource13 TypeMuxSource11,
    muxSource23 TypeMuxSource11,
    transcoderStatus13 TypeInputStatus1,
    transcoderStatus23 TypeInputStatus1,
    bypassSource14 TypeBypassSource11,
    bypassSource24 TypeBypassSource11,
    muxSource14 TypeMuxSource11,
    muxSource24 TypeMuxSource11,
    transcoderStatus14 TypeInputStatus1,
    transcoderStatus24 TypeInputStatus1,
    demuxSource1 TypeBypassSource11,
    demuxSource2 TypeBypassSource11,
    bNCPortDirection1 TypeBNCPortDirection1,
    bNCPortDirection2 TypeBNCPortDirection1,
    bNCPortDirection3 TypeBNCPortDirection1,
    bNCPortDirection4 TypeBNCPortDirection1,
    hardwareMainVersion DisplayString,
    hardwareMainBoard DisplayString,
    hardwareMainHWIndex DisplayString,
    hardwareMainChangeIndex DisplayString,
    hardwareMainSerial DisplayString,
    hardwareMainDate DisplayString,
    hardwareBackVersion DisplayString,
    hardwareBackBoard DisplayString,
    hardwareBackHWIndex DisplayString,
    hardwareBackChangeIndex DisplayString,
    hardwareBackSerial DisplayString,
    hardwareBackDate DisplayString,
    outputSourceTR1 TypeOutputSourceTR1,
    outputSourceTR3 TypeOutputSourceTR1,
    outputSourceTX21 TypeOutputSourceTR1,
    outputSourceTX23 TypeOutputSourceTR1,
    eventOpticalSDIInput1Overload OnOffValue,
    eventOpticalSDIInput2Overload OnOffValue,
    eventOpticalSDIInput3Overload OnOffValue,
    eventOpticalSDIInput4Overload OnOffValue,
    eventOpticalSDIInput1OverloadSNMP TypeEventPrimaryPowermissingSNMP,
    eventOpticalSDIInput2OverloadSNMP TypeEventPrimaryPowermissingSNMP,
    eventOpticalSDIInput3OverloadSNMP TypeEventPrimaryPowermissingSNMP,
    eventOpticalSDIInput4OverloadSNMP TypeEventPrimaryPowermissingSNMP,
    eventSFPStickinvaliddata OnOffValue,
    eventSFPStickinvaliddataSNMP TypeEventPrimaryPowermissingSNMP }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of DVD5480-HO"
    ::= { sw952 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        lock,
        locate,
        statusColor,
        statusColorRGB,
        statusText,
        boardID,
        eventPrimaryPowermissing,
        eventRedundantPowermissing,
        eventSDIInput1NoInput,
        eventSDIInput2NoInput,
        eventSDIInput3NoInput,
        eventSDIInput4NoInput,
        eventSDIInput5NoInput,
        eventSDIInput6NoInput,
        eventSDIInput7NoInput,
        eventSDIInput8NoInput,
        eventPrimaryPowermissingSNMP,
        eventRedundantPowermissingSNMP,
        eventSDIInput1NoInputSNMP,
        eventSDIInput2NoInputSNMP,
        eventSDIInput3NoInputSNMP,
        eventSDIInput4NoInputSNMP,
        eventSDIInput5NoInputSNMP,
        eventSDIInput6NoInputSNMP,
        eventSDIInput7NoInputSNMP,
        eventSDIInput8NoInputSNMP,
        sFPModuleType1,
        sFPModulePartNumber1,
        sFPModuleType2,
        sFPModulePartNumber2,
        sFPModuleType3,
        sFPModulePartNumber3,
        sFPModuleType4,
        sFPModulePartNumber4,
        inputStatus1,
        inputStatus2,
        inputStatus3,
        inputStatus4,
        inputStatus5,
        inputBudgetOpt1,
        inputStatus6,
        inputBudgetOpt2,
        inputStatus7,
        inputBudgetOpt3,
        inputStatus8,
        inputBudgetOpt4,
        outputStatus1,
        outputStatus2,
        outputStatus3,
        outputStatus4,
        outputStatus5,
        outputStatus6,
        outputStatus7,
        outputStatus8,
        transcoderMode1,
        transcoderMode2,
        bypassSource11,
        bypassSource21,
        muxSource11,
        muxSource21,
        transcoderStatus11,
        transcoderStatus21,
        bypassSource12,
        bypassSource22,
        muxSource12,
        muxSource22,
        transcoderStatus12,
        transcoderStatus22,
        bypassSource13,
        bypassSource23,
        muxSource13,
        muxSource23,
        transcoderStatus13,
        transcoderStatus23,
        bypassSource14,
        bypassSource24,
        muxSource14,
        muxSource24,
        transcoderStatus14,
        transcoderStatus24,
        demuxSource1,
        demuxSource2,
        bNCPortDirection1,
        bNCPortDirection2,
        bNCPortDirection3,
        bNCPortDirection4,
        hardwareMainVersion,
        hardwareMainBoard,
        hardwareMainHWIndex,
        hardwareMainChangeIndex,
        hardwareMainSerial,
        hardwareMainDate,
        hardwareBackVersion,
        hardwareBackBoard,
        hardwareBackHWIndex,
        hardwareBackChangeIndex,
        hardwareBackSerial,
        hardwareBackDate,
        outputSourceTR1,
        outputSourceTR3,
        outputSourceTX21,
        outputSourceTX23,
        eventOpticalSDIInput1Overload,
        eventOpticalSDIInput2Overload,
        eventOpticalSDIInput3Overload,
        eventOpticalSDIInput4Overload,
        eventOpticalSDIInput1OverloadSNMP,
        eventOpticalSDIInput2OverloadSNMP,
        eventOpticalSDIInput3OverloadSNMP,
        eventOpticalSDIInput4OverloadSNMP,
        eventSFPStickinvaliddata,
        eventSFPStickinvaliddataSNMP }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END