-- Machine generated MIB file, do not edit! -- -- MIB file for DVD5610, type code 08.C4, software label 145 -- Generated on Tuesday, 09-Aug-16 14:28:46 UTC -- CVS $Id: DVD5610_08c4_sw145.mib,v 1.11 2016/08/09 14:28:48 jvo Exp $ -- -- Copyright 2003-2016 by LYNX Technik AG -- -- These coded instructions, statements, and computer programs contain -- unpublished proprietary information written by LYNX Technik AG and -- are protected by Federal copyright law. They may not be disclosed -- to third parties or copied or duplicated in any form, in whole or -- in part, without the prior written consent of LYNX Technik AG. -- DVD5610-08c4-sw145-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578 TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579 MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580 mib-modules, products, FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI; dvd5610-08c4-sw145 MODULE-IDENTITY LAST-UPDATED "201608091428Z" ORGANIZATION "LYNX Technik AG" CONTACT-INFO "LYNX Technik AG Brunnenweg 3 64331 Weiterstadt http://www.lynx-technik.com mailto:support@lynx-technik.com" DESCRIPTION "MIB module definition for DVD5610, type code 08.C4, software label 145" REVISION "201608091428Z" DESCRIPTION "Generated by LYNX Asset Database" ::= { mib-modules 2244145 } dvd5610-08c4 OBJECT-IDENTITY STATUS current DESCRIPTION "LYNX device type DVD5610" ::= { products 2244 } sw145 OBJECT-IDENTITY STATUS current DESCRIPTION "Software label 145" ::= { dvd5610-08c4 145 } -- Type definitions TypeStatusColor ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { unknown(0), black(1), green(2), yellow(3), red(4) } TypeFactoryReset ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { press(0) } TypeIn1 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { missing(0), invalid(1), unknown(2), unlocked(3), n143Mbps(4), n177Mbps(5), n270Mbps(6), n360Mbps(7), n540Mbps(8), n1485Mbps(9) } TypeBwidth1 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n05MHz(0), n10MHz(1), n14MHz(2), n17MHz(3), n15MHz(4), n35MHz(5), n50MHz(6), n60MHz(7) } TypeSearchRate1 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n2701485MHz(0), n2703601485MHz(1), n2703605401485MHz(2), all1431485MHz(3) } TypeEventlostinput1SNMP ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), onOnly(1), offOnly(2), onOff(3) } -- Parameter definitions typeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "LYNX product type name" ::= { paramEntry 1 } displayName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller" ::= { paramEntry 2 } position OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)" ::= { paramEntry 3 } uptime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Connection time of the device to this UI (in seconds)" ::= { paramEntry 4 } type OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device type code" ::= { paramEntry 5 } version OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device version information" ::= { paramEntry 6 } statusColor OBJECT-TYPE SYNTAX TypeStatusColor MAX-ACCESS read-only STATUS current DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)" ::= { paramEntry 7 } statusColorRGB OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current color of the Devices Master LED as #RRGGBB" ::= { paramEntry 8 } statusText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current status text (OK or error-details)" ::= { paramEntry 9 } factoryReset OBJECT-TYPE SYNTAX TypeFactoryReset MAX-ACCESS read-write STATUS current DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)" ::= { paramEntry 10 } lock OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Lock Device" ::= { paramEntry 11 } locate OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF" ::= { paramEntry 12 } eventlostinput1 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: lost input 1 (input signal 1 can not be detected)" ::= { paramEntry 14 } eventlostinput2 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: lost input 2 (input signal 2 can not be detected)" ::= { paramEntry 15 } eventinvalidinput1 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: invalid input 1 (PLL on input 1 could not lock on input signal)" ::= { paramEntry 16 } eventinvalidinput2 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: invalid input 2 (PLL on input 2 could not lock on input signal)" ::= { paramEntry 17 } in1 OBJECT-TYPE SYNTAX TypeIn1 MAX-ACCESS read-only STATUS current DESCRIPTION "Input status channel 1" ::= { paramEntry 18 } bwidth1 OBJECT-TYPE SYNTAX TypeBwidth1 MAX-ACCESS read-write STATUS current DESCRIPTION "Bandwidth" ::= { paramEntry 19 } searchRate1 OBJECT-TYPE SYNTAX TypeSearchRate1 MAX-ACCESS read-write STATUS current DESCRIPTION "Search rates" ::= { paramEntry 20 } exclude1771 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "exclude 177 MHz" ::= { paramEntry 21 } reclock1 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "select SDI reclocking on output 1" ::= { paramEntry 22 } boardID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "BoardID" ::= { paramEntry 23 } out1 OBJECT-TYPE SYNTAX TypeIn1 MAX-ACCESS read-only STATUS current DESCRIPTION "Output status channel 1" ::= { paramEntry 24 } eventlostinput1SNMP OBJECT-TYPE SYNTAX TypeEventlostinput1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: lost input 1 (input signal 1 can not be detected)" ::= { paramEntry 25 } eventlostinput2SNMP OBJECT-TYPE SYNTAX TypeEventlostinput1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: lost input 2 (input signal 2 can not be detected)" ::= { paramEntry 26 } eventinvalidinput1SNMP OBJECT-TYPE SYNTAX TypeEventlostinput1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: invalid input 1 (PLL on input 1 could not lock on input signal)" ::= { paramEntry 27 } eventinvalidinput2SNMP OBJECT-TYPE SYNTAX TypeEventlostinput1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: invalid input 2 (PLL on input 2 could not lock on input signal)" ::= { paramEntry 28 } sNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Number" ::= { paramEntry 29 } -- Parameter table paramTable OBJECT-TYPE SYNTAX SEQUENCE OF ParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of DVD5610 parameters" ::= { sw145 1 } paramEntry OBJECT-TYPE SYNTAX ParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the table of DVD5610 parameters" INDEX { IMPLIED position } ::= { paramTable 1 } ParamEntry ::= SEQUENCE { typeName DisplayString, displayName DisplayString, position OCTET STRING, uptime TimeTicks, type DisplayString, version DisplayString, statusColor TypeStatusColor, statusColorRGB DisplayString, statusText DisplayString, factoryReset TypeFactoryReset, lock OnOffValue, locate OnOffValue, eventlostinput1 OnOffValue, eventlostinput2 OnOffValue, eventinvalidinput1 OnOffValue, eventinvalidinput2 OnOffValue, in1 TypeIn1, bwidth1 TypeBwidth1, searchRate1 TypeSearchRate1, exclude1771 OnOffValue, reclock1 OnOffValue, boardID Integer32, out1 TypeIn1, eventlostinput1SNMP TypeEventlostinput1SNMP, eventlostinput2SNMP TypeEventlostinput1SNMP, eventinvalidinput1SNMP TypeEventlostinput1SNMP, eventinvalidinput2SNMP TypeEventlostinput1SNMP, sNumber DisplayString } -- Conformance statements conformance OBJECT-IDENTITY STATUS current DESCRIPTION "Conformance declaration of DVD5610" ::= { sw145 2 } paramGroup OBJECT-GROUP OBJECTS { typeName, displayName, position, uptime, type, version, statusColor, statusColorRGB, statusText, factoryReset, lock, locate, eventlostinput1, eventlostinput2, eventinvalidinput1, eventinvalidinput2, in1, bwidth1, searchRate1, exclude1771, reclock1, boardID, out1, eventlostinput1SNMP, eventlostinput2SNMP, eventinvalidinput1SNMP, eventinvalidinput2SNMP, sNumber } STATUS current DESCRIPTION "Conformance group containing all device parameters" ::= { conformance 1 } paramCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance specification" MODULE -- This module MANDATORY-GROUPS { paramGroup } ::= { conformance 2 } END