-- Machine generated MIB file, do not edit!
--
-- MIB file for OET1910, type code 42.33, software label 990
-- Generated on Thursday, 08-Apr-21 11:23:17 UTC
-- CVS $Id: OET1910_4233_sw990.mib,v 1.2 2021/04/08 11:23:18 til Exp $
--
-- Copyright 2003-2021 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

OET1910-4233-sw990-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

oet1910-4233-sw990 MODULE-IDENTITY
    LAST-UPDATED "202104081123Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for OET1910, type code 42.33, software label 990"
    REVISION "202104081123Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 16947990 }

oet1910-4233 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type OET1910"
    ::= { products 16947 }

sw990 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 990"
    ::= { oet1910-4233 990 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        red(1),
        green(2),
        yellow(3)
    }

TypeStatusColorRGB ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n000000(0),
        ff0000(1),
        n00ff00(2),
        ffff00(3)
    }

TypePort1Color ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        offX(1),
        green(2),
        greenX(3)
    }

TypePort1ColorRGB ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n000000(0),
        n000000X(1),
        n00ff00(2),
        n00ff00X(3)
    }

TypeVariantName ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        oET1910(0),
        oET1940(1)
    }

TypeLinkStatus1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unlocked(0),
        locked(1),
        negotiated(2)
    }

TypeLinkSpeed1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n1G(0),
        n10G(1)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 8 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 9 }

statusColorRGB OBJECT-TYPE
    SYNTAX TypeStatusColorRGB
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 10 }

port1Color OBJECT-TYPE
    SYNTAX TypePort1Color
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Port 1 LED (off/green)"
    ::= { paramEntry 11 }

port1ColorRGB OBJECT-TYPE
    SYNTAX TypePort1ColorRGB
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Port 1 LED as #RRGGBB"
    ::= { paramEntry 12 }

port2Color OBJECT-TYPE
    SYNTAX TypePort1Color
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Port 2 LED (off/green)"
    ::= { paramEntry 13 }

port2ColorRGB OBJECT-TYPE
    SYNTAX TypePort1ColorRGB
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Port 2 LED as #RRGGBB"
    ::= { paramEntry 14 }

variantName OBJECT-TYPE
    SYNTAX TypeVariantName
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the Variant of this Device"
    ::= { paramEntry 16 }

linkStatus1 OBJECT-TYPE
    SYNTAX TypeLinkStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the status of Link 1"
    ::= { paramEntry 17 }

linkSpeed1 OBJECT-TYPE
    SYNTAX TypeLinkSpeed1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the speed of Link 1"
    ::= { paramEntry 18 }

sFPModulePartNumber1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of detected SFP Module 1"
    ::= { paramEntry 19 }

sFPModuleType1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the type of detected SFP-Module 1. The SFP part number will be displayed if SFP Module is unknown."
    ::= { paramEntry 20 }

inputBudgetOpt1 OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays input budget on opical port 1"
    ::= { paramEntry 21 }

linkStatus2 OBJECT-TYPE
    SYNTAX TypeLinkStatus1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the status of Link 2"
    ::= { paramEntry 22 }

linkSpeed2 OBJECT-TYPE
    SYNTAX TypeLinkSpeed1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the speed of Link 2"
    ::= { paramEntry 23 }

sFPModulePartNumber2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of detected SFP Module 2"
    ::= { paramEntry 24 }

sFPModuleType2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the type of detected SFP-Module 2. The SFP part number will be displayed if SFP Module is unknown."
    ::= { paramEntry 25 }

inputBudgetOpt2 OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays input budget on opical port 2"
    ::= { paramEntry 26 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of OET1910 parameters"
    ::= { sw990 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of OET1910 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    locate OnOffValue,
    statusColor TypeStatusColor,
    statusColorRGB TypeStatusColorRGB,
    port1Color TypePort1Color,
    port1ColorRGB TypePort1ColorRGB,
    port2Color TypePort1Color,
    port2ColorRGB TypePort1ColorRGB,
    variantName TypeVariantName,
    linkStatus1 TypeLinkStatus1,
    linkSpeed1 TypeLinkSpeed1,
    sFPModulePartNumber1 DisplayString,
    sFPModuleType1 DisplayString,
    inputBudgetOpt1 FixedPointValue1,
    linkStatus2 TypeLinkStatus1,
    linkSpeed2 TypeLinkSpeed1,
    sFPModulePartNumber2 DisplayString,
    sFPModuleType2 DisplayString,
    inputBudgetOpt2 FixedPointValue1 }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of OET1910"
    ::= { sw990 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        locate,
        statusColor,
        statusColorRGB,
        port1Color,
        port1ColorRGB,
        port2Color,
        port2ColorRGB,
        variantName,
        linkStatus1,
        linkSpeed1,
        sFPModulePartNumber1,
        sFPModuleType1,
        inputBudgetOpt1,
        linkStatus2,
        linkSpeed2,
        sFPModulePartNumber2,
        sFPModuleType2,
        inputBudgetOpt2 }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END