-- Machine generated MIB file, do not edit!
--
-- MIB file for ORX1702, type code 42.16, software label 589
-- Generated on Friday, 19-Feb-21 16:14:53 UTC
-- CVS $Id: ORX1702_4216_sw589.mib,v 1.2 2021/02/19 16:14:54 til Exp $
--
-- Copyright 2003-2021 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs contain
-- unpublished proprietary information written by LYNX Technik AG and
-- are protected by Federal copyright law. They may not be disclosed
-- to third parties or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--
ORX1702-4216-sw589-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
mib-modules, products,
FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;
orx1702-4216-sw589 MODULE-IDENTITY
LAST-UPDATED "202102191614Z"
ORGANIZATION "LYNX Technik AG"
CONTACT-INFO "LYNX Technik AG
Brunnenweg 3
64331 Weiterstadt
http://www.lynx-technik.com
mailto:support@lynx-technik.com"
DESCRIPTION "MIB module definition for ORX1702, type code 42.16, software label 589"
REVISION "202102191614Z"
DESCRIPTION "Generated by LYNX Asset Database"
::= { mib-modules 16918589 }
orx1702-4216 OBJECT-IDENTITY
STATUS current
DESCRIPTION "LYNX device type ORX1702"
::= { products 16918 }
sw589 OBJECT-IDENTITY
STATUS current
DESCRIPTION "Software label 589"
::= { orx1702-4216 589 }
-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
press(0)
}
TypeStatusColor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
red(1),
green(2),
yellow(3)
}
TypeStatusColorRGB ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n000000(0),
ff0000(1),
n00ff00(2),
ffff00(3)
}
TypeSDIInputStandard ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
invalid(1),
n525(2),
n625(3),
n720p60(4),
n720p5994(5),
n720p50(6),
n720p30(7),
n720p2997(8),
n720p25(9),
n720p24(10),
n720p2398(11),
n1080i60(12),
n1080i5994(13),
n1080i50(14),
n1080p60(15),
n1080p5994(16),
n1080p50(17),
n1080p30(18),
n1080p2997(19),
n1080p25(20),
n1080p24(21),
n1080p2398(22),
n1080psF30(23),
n1080psF2997(24),
n1080psF25(25),
n1080psF24(26),
n1080psF2398(27),
n2KP60(28),
n2KP59(29),
n2KP50(30),
n2KP48(31),
n2KP47(32),
n2KP30(33),
n2KP29(34),
n2KP25(35),
n2KP24(36),
n2KP23(37),
n2KPsF30(38),
n2KPsF29(39),
n2KPsF25(40),
n2KPsF24(41),
n2KPsF23(42)
}
TypeSourceInfo ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
notAvailable(0),
n525SyncBiLevel(1),
n525BlackBurstSyncBurst(2),
n525BlackBurstPALM(3),
n525VideoNTSCMJ(4),
n525VideoPALM(5),
n625SyncBiLevel(6),
n625BlackBurstSyncBurst(7),
n625BlackBurstPALN(8),
n625VideoPALBGHID(9),
n625VideoPALN(10),
n720p50SyncTriLevel(11),
n720p59SyncTriLevel(12),
n720p60SyncTriLevel(13),
n1080i50SyncTriLevel(14),
n1080i59SyncTriLevel(15),
n1080i60SyncTriLevel(16),
n1080p23SyncTriLevel(17),
n1080p24SyncTriLevel(18),
n1080p25SyncTriLevel(19),
n1080sF23SyncTriLevel(20),
n1080sF24SyncTriLevel(21)
}
TypeAnalogOutputSignal ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
n525Sync(1),
nTSCBlackBurst(2),
pALMBlackBurst(3),
nTSCMJVideo(4),
pALMVideo(5),
n625Sync(6),
pALBGHIDBlackBurst(7),
pALNBlackBurst(8),
pALBGHIDVideo(9),
pALNVideo(10),
n720p50Sync(11),
n720p59Sync(12),
n720p60Sync(13),
n1080i50Sync(14),
n1080i59Sync(15),
n1080i60Sync(16),
n1080p23Sync(17),
n1080p24Sync(18),
n1080p25Sync(19),
n1080sF23Sync(20),
n1080sF24Sync(21)
}
TypeSourceLYNXSourceDetected ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
yes(0),
no(1)
}
TypeDelayMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
linesPixels(0),
milliSeconds(1)
}
TypeColorburstPhase ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
autoRegen8V(0),
freerun(1),
phaseLockedLYNXSource(2)
}
TypeColorburstPhaseStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freerun(0),
autoRegen8VLYNXSource(1),
phaseLockedLYNXSource(2)
}
TypeColorBurst ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
automatic(0),
on(1),
off(2)
}
TypeColorBurstStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
on(0),
off(1)
}
-- Parameter definitions
typeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LYNX product type name"
::= { paramEntry 1 }
displayName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
::= { paramEntry 2 }
position OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
::= { paramEntry 3 }
uptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Connection time of the device to this UI (in seconds)"
::= { paramEntry 4 }
type OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device type code"
::= { paramEntry 5 }
version OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device version information"
::= { paramEntry 6 }
factoryReset OBJECT-TYPE
SYNTAX TypeFactoryReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
::= { paramEntry 7 }
locate OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
::= { paramEntry 8 }
statusColor OBJECT-TYPE
SYNTAX TypeStatusColor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
::= { paramEntry 9 }
statusColorRGB OBJECT-TYPE
SYNTAX TypeStatusColorRGB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
::= { paramEntry 10 }
sDIInputStandard OBJECT-TYPE
SYNTAX TypeSDIInputStandard
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of SDI input"
::= { paramEntry 12 }
sourceInfo OBJECT-TYPE
SYNTAX TypeSourceInfo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Additional information on the original source of the SDI input signal.
This information is only available, if the SDI input signal has been generated by a LYNX compatible device (such as OTX17x2)."
::= { paramEntry 13 }
analogOutputSignal OBJECT-TYPE
SYNTAX TypeAnalogOutputSignal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current signal Standard on analog video output"
::= { paramEntry 14 }
pedestal OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Analog Video Output: Add Pedestal (applicable to SD 525 signals)"
::= { paramEntry 15 }
timingAlignment OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is the timing alignment in micro seconds of the analog output with respect to the input of the original analog source.
This information is only available, if the SDI input signal has been generated by a LYNX compatible device (such as OTX17x2). "
::= { paramEntry 16 }
sourceLYNXSourceDetected OBJECT-TYPE
SYNTAX TypeSourceLYNXSourceDetected
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This information shows if a LYNX compatible timing source has been detected (such as OTX17x2).
In this case, the SDI signal carries additional information that allows a more precise reproduction of the original analog source signal."
::= { paramEntry 17 }
delayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Additional delay [lines] of analog output signal.
Depending on parameter DelayMode this value can either be set by user or it is calculated from the current Delay/Milliseconds."
::= { paramEntry 18 }
delayPixels OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Additional delay [pixels] of analog output signal.
Depending on parameter DelayMode this value can either be set by user or it is calculated from the current Delay/Milliseconds."
::= { paramEntry 19 }
delayMsec OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Additional delay [msec] of analog output signal.
Depending on parameter DelayMode this value can either be set by user or it is calculated from the current Delay/LinesPixels."
::= { paramEntry 20 }
delayMode OBJECT-TYPE
SYNTAX TypeDelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter determines if the user output delay is specified is lines and pixels or in absolute milliseconds.
The other values will automatically be calculated, depending on the current video standard."
::= { paramEntry 21 }
videoContent OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "By default, the video content of an SDTV signal is set to black and the output timing aligment is forced to be vertically aligned to the input.
NOTE that if the SDI input has been generated by a LYNX OTX17x2, then the timing aligment will be set to match the analog input of the OTX17x2 source."
::= { paramEntry 22 }
colorburstPhase OBJECT-TYPE
SYNTAX TypeColorburstPhase
MAX-ACCESS read-write
STATUS current
DESCRIPTION "By default, the colorburst 8V sequence of a CVBS output signal is derived from metadata in the SDI input, as available.
The exact colorburst phase itself will be regenerated according to this 8V sequence.
Setting this param to freerun will generate the colorburst independently from any potential input information. As another alternative, this parameter can be set to phase locked which will set the exact colorburst phase to the input information (this option is only available if the SDI input has been generated by a LYNX compatible device, such as OTX17x2)."
::= { paramEntry 23 }
colorburstPhaseStatus OBJECT-TYPE
SYNTAX TypeColorburstPhaseStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This status parameter shows if the colorburst 8V sequence is currently being defined by input metadata or not."
::= { paramEntry 24 }
colorBurst OBJECT-TYPE
SYNTAX TypeColorBurst
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if a generated analog SDTV video contains a colorburst.
By default (automatic), there will be a colorburst for SDTV signals.
NOTE: If the input signal has been generated by a LYNX OTX17x2, then the default automatic behaviour also depends on the current configuration of the OTX17x2."
::= { paramEntry 25 }
colorBurstStatus OBJECT-TYPE
SYNTAX TypeColorBurstStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This status parameter shows if a generated analog SDTV video contains a colorburst.
By default (automatic), there will be a colorburst for SDTV signals.
NOTE: If the input signal has been generated by a LYNX OTX17x2, then the default automatic behaviour also depends on the current configuration of the OTX17x2."
::= { paramEntry 26 }
-- Parameter table
paramTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of ORX1702 parameters"
::= { sw589 1 }
paramEntry OBJECT-TYPE
SYNTAX ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row in the table of ORX1702 parameters"
INDEX { IMPLIED position }
::= { paramTable 1 }
ParamEntry ::= SEQUENCE {
typeName DisplayString,
displayName DisplayString,
position OCTET STRING,
uptime TimeTicks,
type DisplayString,
version DisplayString,
factoryReset TypeFactoryReset,
locate OnOffValue,
statusColor TypeStatusColor,
statusColorRGB TypeStatusColorRGB,
sDIInputStandard TypeSDIInputStandard,
sourceInfo TypeSourceInfo,
analogOutputSignal TypeAnalogOutputSignal,
pedestal OnOffValue,
timingAlignment Integer32,
sourceLYNXSourceDetected TypeSourceLYNXSourceDetected,
delayLines Integer32,
delayPixels Integer32,
delayMsec FixedPointValue3,
delayMode TypeDelayMode,
videoContent OnOffValue,
colorburstPhase TypeColorburstPhase,
colorburstPhaseStatus TypeColorburstPhaseStatus,
colorBurst TypeColorBurst,
colorBurstStatus TypeColorBurstStatus }
-- Conformance statements
conformance OBJECT-IDENTITY
STATUS current
DESCRIPTION "Conformance declaration of ORX1702"
::= { sw589 2 }
paramGroup OBJECT-GROUP
OBJECTS {
typeName,
displayName,
position,
uptime,
type,
version,
factoryReset,
locate,
statusColor,
statusColorRGB,
sDIInputStandard,
sourceInfo,
analogOutputSignal,
pedestal,
timingAlignment,
sourceLYNXSourceDetected,
delayLines,
delayPixels,
delayMsec,
delayMode,
videoContent,
colorburstPhase,
colorburstPhaseStatus,
colorBurst,
colorBurstStatus }
STATUS current
DESCRIPTION "Conformance group containing all device parameters"
::= { conformance 1 }
paramCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance specification"
MODULE -- This module
MANDATORY-GROUPS { paramGroup }
::= { conformance 2 }
END