-- Machine generated MIB file, do not edit!
--
-- MIB file for ORX5804, type code 08.D6, software label 516
-- Generated on Tuesday, 09-Aug-16 14:41:20 UTC
-- CVS $Id: ORX5804_08d6_sw516.mib,v 1.6 2016/08/09 14:41:22 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

ORX5804-08d6-sw516-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

orx5804-08d6-sw516 MODULE-IDENTITY
    LAST-UPDATED "201608091441Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for ORX5804, type code 08.D6, software label 516"
    REVISION "201608091441Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 2262516 }

orx5804-08d6 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type ORX5804"
    ::= { products 2262 }

sw516 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 516"
    ::= { orx5804-08d6 516 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeSourceInput3 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        optical(0),
        electrical(1)
    }

TypeIn1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        sDSDI(1),
        hDSDI(2),
        n3GSDI(3),
        hD3G(4),
        present(5)
    }

TypeSourceOut1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        in1(0),
        in2(1),
        in3(2),
        in4(3)
    }

TypeEventSDIInput1NoInputSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventSDIInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: SDI Input 1 No Input"
    ::= { paramEntry 14 }

eventSDIInput2NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: SDI Input 2 No Input"
    ::= { paramEntry 15 }

eventSDIInput3NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: SDI Input 3 No Input"
    ::= { paramEntry 16 }

eventSDIInput4NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: SDI Input 4 No Input"
    ::= { paramEntry 17 }

eventPSU1Failure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PSU1: Failure"
    ::= { paramEntry 18 }

eventPSU2Failure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PSU2: Failure"
    ::= { paramEntry 19 }

sourceInput3 OBJECT-TYPE
    SYNTAX TypeSourceInput3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for Input 3 from electrical or optical connector"
    ::= { paramEntry 20 }

sourceInput4 OBJECT-TYPE
    SYNTAX TypeSourceInput3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for Input 4 from electrical or optical connector"
    ::= { paramEntry 21 }

in1 OBJECT-TYPE
    SYNTAX TypeIn1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status channel 1"
    ::= { paramEntry 22 }

in2 OBJECT-TYPE
    SYNTAX TypeIn1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status channel 2"
    ::= { paramEntry 23 }

in3 OBJECT-TYPE
    SYNTAX TypeIn1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status channel 3"
    ::= { paramEntry 24 }

in4 OBJECT-TYPE
    SYNTAX TypeIn1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Input status channel 4"
    ::= { paramEntry 25 }

reclock1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select SDI reclocking on input 1"
    ::= { paramEntry 26 }

reclock2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select SDI reclocking on input 2"
    ::= { paramEntry 27 }

reclock3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select SDI reclocking on input 3"
    ::= { paramEntry 28 }

reclock4 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select SDI reclocking on input 4"
    ::= { paramEntry 29 }

input1OpticalSignalQuality OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Signal quality at optical SDI Input 1"
    ::= { paramEntry 30 }

input2OpticalSignalQuality OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Signal quality at optical SDI Input 2"
    ::= { paramEntry 31 }

input3OpticalSignalQuality OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Signal quality at optical SDI Input 3"
    ::= { paramEntry 32 }

input4OpticalSignalQuality OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Signal quality at optical SDI Input 4"
    ::= { paramEntry 33 }

sFPModuleType1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "displays the type of detected SFP-Module 1. The SFP part number will also be  displayed if SFP-Module is unknown."
    ::= { paramEntry 34 }

sFPModulePartNumber1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of used SFP Module"
    ::= { paramEntry 35 }

sFPModuleType2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "displays the type of detected SFP-Module 2. The SFP part number will also be  displayed if SFP-Module is unknown."
    ::= { paramEntry 36 }

sFPModulePartNumber2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays the part number of used SFP Module"
    ::= { paramEntry 37 }

sourceOut1 OBJECT-TYPE
    SYNTAX TypeSourceOut1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source stream for output 1 from input 1 or 2"
    ::= { paramEntry 38 }

sourceOut2 OBJECT-TYPE
    SYNTAX TypeSourceOut1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source stream for output 2 from input 1 or 2"
    ::= { paramEntry 39 }

sourceOut3 OBJECT-TYPE
    SYNTAX TypeSourceOut1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source stream for output 3 from input 1 or 2"
    ::= { paramEntry 40 }

sourceOut4 OBJECT-TYPE
    SYNTAX TypeSourceOut1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source stream for output 4 from input 1 or 2"
    ::= { paramEntry 41 }

eventPrimaryPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Primary Power missing"
    ::= { paramEntry 42 }

eventRedundantPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Redundant Power missing"
    ::= { paramEntry 43 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 44 }

out1 OBJECT-TYPE
    SYNTAX TypeIn1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status channel 1"
    ::= { paramEntry 45 }

out2 OBJECT-TYPE
    SYNTAX TypeIn1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status channel 2"
    ::= { paramEntry 46 }

out3 OBJECT-TYPE
    SYNTAX TypeIn1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status channel 3"
    ::= { paramEntry 47 }

out4 OBJECT-TYPE
    SYNTAX TypeIn1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Output status channel 4"
    ::= { paramEntry 48 }

eventSDIInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 1 No Input"
    ::= { paramEntry 49 }

eventSDIInput2NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 2 No Input"
    ::= { paramEntry 50 }

eventSDIInput3NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 3 No Input"
    ::= { paramEntry 51 }

eventSDIInput4NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 4 No Input"
    ::= { paramEntry 52 }

eventPrimaryPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Primary Power missing"
    ::= { paramEntry 53 }

eventRedundantPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Redundant Power missing"
    ::= { paramEntry 54 }

sFP1OutPower OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "displays the average output power of detected SFP-Module 1."
    ::= { paramEntry 55 }

sFP1Wavelength1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "displays the wavelength of detected SFP-Module 1."
    ::= { paramEntry 56 }

sFP1Wavelength2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "displays the wavelength of detected SFP-Module 1."
    ::= { paramEntry 57 }

sFP2OutPower OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "displays the average output power of detected SFP-Module 2."
    ::= { paramEntry 58 }

sFP2Wavelength1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "displays the wavelength of detected SFP-Module 2."
    ::= { paramEntry 59 }

sFP2Wavelength2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "displays the wavelength of detected SFP-Module 2."
    ::= { paramEntry 60 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 61 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of ORX5804 parameters"
    ::= { sw516 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of ORX5804 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventSDIInput1NoInput OnOffValue,
    eventSDIInput2NoInput OnOffValue,
    eventSDIInput3NoInput OnOffValue,
    eventSDIInput4NoInput OnOffValue,
    eventPSU1Failure OnOffValue,
    eventPSU2Failure OnOffValue,
    sourceInput3 TypeSourceInput3,
    sourceInput4 TypeSourceInput3,
    in1 TypeIn1,
    in2 TypeIn1,
    in3 TypeIn1,
    in4 TypeIn1,
    reclock1 OnOffValue,
    reclock2 OnOffValue,
    reclock3 OnOffValue,
    reclock4 OnOffValue,
    input1OpticalSignalQuality FixedPointValue1,
    input2OpticalSignalQuality FixedPointValue1,
    input3OpticalSignalQuality FixedPointValue1,
    input4OpticalSignalQuality FixedPointValue1,
    sFPModuleType1 DisplayString,
    sFPModulePartNumber1 DisplayString,
    sFPModuleType2 DisplayString,
    sFPModulePartNumber2 DisplayString,
    sourceOut1 TypeSourceOut1,
    sourceOut2 TypeSourceOut1,
    sourceOut3 TypeSourceOut1,
    sourceOut4 TypeSourceOut1,
    eventPrimaryPowermissing OnOffValue,
    eventRedundantPowermissing OnOffValue,
    boardID Integer32,
    out1 TypeIn1,
    out2 TypeIn1,
    out3 TypeIn1,
    out4 TypeIn1,
    eventSDIInput1NoInputSNMP TypeEventSDIInput1NoInputSNMP,
    eventSDIInput2NoInputSNMP TypeEventSDIInput1NoInputSNMP,
    eventSDIInput3NoInputSNMP TypeEventSDIInput1NoInputSNMP,
    eventSDIInput4NoInputSNMP TypeEventSDIInput1NoInputSNMP,
    eventPrimaryPowermissingSNMP TypeEventSDIInput1NoInputSNMP,
    eventRedundantPowermissingSNMP TypeEventSDIInput1NoInputSNMP,
    sFP1OutPower DisplayString,
    sFP1Wavelength1 DisplayString,
    sFP1Wavelength2 DisplayString,
    sFP2OutPower DisplayString,
    sFP2Wavelength1 DisplayString,
    sFP2Wavelength2 DisplayString,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of ORX5804"
    ::= { sw516 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventSDIInput1NoInput,
        eventSDIInput2NoInput,
        eventSDIInput3NoInput,
        eventSDIInput4NoInput,
        eventPSU1Failure,
        eventPSU2Failure,
        sourceInput3,
        sourceInput4,
        in1,
        in2,
        in3,
        in4,
        reclock1,
        reclock2,
        reclock3,
        reclock4,
        input1OpticalSignalQuality,
        input2OpticalSignalQuality,
        input3OpticalSignalQuality,
        input4OpticalSignalQuality,
        sFPModuleType1,
        sFPModulePartNumber1,
        sFPModuleType2,
        sFPModulePartNumber2,
        sourceOut1,
        sourceOut2,
        sourceOut3,
        sourceOut4,
        eventPrimaryPowermissing,
        eventRedundantPowermissing,
        boardID,
        out1,
        out2,
        out3,
        out4,
        eventSDIInput1NoInputSNMP,
        eventSDIInput2NoInputSNMP,
        eventSDIInput3NoInputSNMP,
        eventSDIInput4NoInputSNMP,
        eventPrimaryPowermissingSNMP,
        eventRedundantPowermissingSNMP,
        sFP1OutPower,
        sFP1Wavelength1,
        sFP1Wavelength2,
        sFP2OutPower,
        sFP2Wavelength1,
        sFP2Wavelength2,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END