-- Machine generated MIB file, do not edit!
--
-- MIB file for OTX1712-1-2-1, type code 42.18, software label 744
-- Generated on Friday, 19-Feb-21 12:54:58 UTC
-- CVS $Id: OTX1712-1-2-1_4218_sw744.mib,v 1.1 2021/02/19 12:54:59 til Exp $
--
-- Copyright 2003-2021 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

OTX1712-1-2-1-4218-sw744-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

otx1712-1-2-1-4218-sw744 MODULE-IDENTITY
    LAST-UPDATED "202102191254Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for OTX1712-1-2-1, type code 42.18, software label 744"
    REVISION "202102191254Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 16920744 }

otx1712-1-2-1-4218 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type OTX1712-1-2-1"
    ::= { products 16920 }

sw744 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 744"
    ::= { otx1712-1-2-1-4218 744 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        red(1),
        green(2),
        yellow(3)
    }

TypeStatusColorRGB ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n000000(0),
        ff0000(1),
        n00ff00(2),
        ffff00(3)
    }

TypeSDIOutputStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27)
    }

TypeInputSignal ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        invalid(1),
        n525Sync(2),
        nTSCMJ(3),
        pALM(4),
        n625Sync(5),
        pALBGHID(6),
        pALN(7),
        n720p50Sync(8),
        n720p59Sync(9),
        n720p60Sync(10),
        n1080i50Sync(11),
        n1080i59Sync(12),
        n1080i60Sync(13),
        n1080p23Sync(14),
        n1080p24Sync(15),
        n1080p25Sync(16),
        n1080sF23Sync(17),
        n1080sF24Sync(18)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 8 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 9 }

statusColorRGB OBJECT-TYPE
    SYNTAX TypeStatusColorRGB
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 10 }

sDIOutputStandard OBJECT-TYPE
    SYNTAX TypeSDIOutputStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of SDI Output"
    ::= { paramEntry 12 }

inputSignal OBJECT-TYPE
    SYNTAX TypeInputSignal
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Current signal Standard on analog video input"
    ::= { paramEntry 13 }

pedestal OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Analog Video Input: Remove Pedestal"
    ::= { paramEntry 14 }

videoContent OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "By default, the video content of an SDTV signal is set to black and the output timing aligment is forced to be vertically aligned to the input.<br>NOTE that if the SDI input has been generated by a LYNX OTX17x2, then the timing aligment will be set to match the analog input of the OTX17x2 source."
    ::= { paramEntry 15 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of OTX1712-1-2-1 parameters"
    ::= { sw744 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of OTX1712-1-2-1 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    locate OnOffValue,
    statusColor TypeStatusColor,
    statusColorRGB TypeStatusColorRGB,
    sDIOutputStandard TypeSDIOutputStandard,
    inputSignal TypeInputSignal,
    pedestal OnOffValue,
    videoContent OnOffValue }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of OTX1712-1-2-1"
    ::= { sw744 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        locate,
        statusColor,
        statusColorRGB,
        sDIOutputStandard,
        inputSignal,
        pedestal,
        videoContent }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END