-- Machine generated MIB file, do not edit!
--
-- MIB file for PAD5212-B-D, type code 0D.81, software label 127
-- Generated on Tuesday, 09-Aug-16 14:55:33 UTC
-- CVS $Id: PAD5212-B-D_0d81_sw127.mib,v 1.11 2016/08/09 14:55:35 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PAD5212-B-D-0d81-sw127-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pad5212-b-d-0d81-sw127 MODULE-IDENTITY
    LAST-UPDATED "201608091455Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PAD5212-B-D, type code 0D.81, software label 127"
    REVISION "201608091455Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 3457127 }

pad5212-b-d-0d81 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PAD5212-B-D"
    ::= { products 3457 }

sw127 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 127"
    ::= { pad5212-b-d-0d81 127 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeReferenceStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        notPresent(0),
        n525(1),
        n625(2)
    }

TypeReferenceSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        externBoard(0),
        internRack(1)
    }

TypeReferenceInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        ok(0),
        miss(1)
    }

TypeSampleRate ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n320KHz(0),
        n441KHz(1),
        n480KHz(2)
    }

TypeDelayPulseInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        notPresent(0),
        present(1),
        notPresentX(2),
        presentX(3)
    }

TypeAES1In ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        present(0),
        leftMissing(1),
        rightMissing(2),
        missing(3)
    }

TypeSampleRateConversion1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        bypass(1)
    }

TypeBits1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n20Bits(0),
        n24Bits(1)
    }

TypeAMute1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        auto(1)
    }

TypeOut1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aESInput1(0),
        aESInput2(1)
    }

TypeOut2 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aESInput2(0),
        aESInput1(1)
    }

TypeEventnoinputAES1LeftSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventnoinputAES1Left OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: no input AES 1 Left (AES 1 Left input signal can not be detected)"
    ::= { paramEntry 14 }

eventnoinputAES1Right OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: no input AES 1 Right (AES 1 Right input signal can not be detected)"
    ::= { paramEntry 15 }

eventnoinputAES2Left OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: no input AES 2 Left (AES 2 Left input signal can not be detected)"
    ::= { paramEntry 16 }

eventnoinputAES2Right OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: no input AES 2 Right (AES 2 Right input signal can not be detected)"
    ::= { paramEntry 17 }

eventnoreference OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: no reference (reference input signal can not be detected)"
    ::= { paramEntry 18 }

eventnonaudiodatainAES1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: non-audio data in AES1 (AES 1 contains non-audio data)"
    ::= { paramEntry 19 }

eventnonaudiodatainAES2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: non-audio data in AES2 (AES 2 contains non-audio data)"
    ::= { paramEntry 20 }

event525videoreference OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 525 video reference"
    ::= { paramEntry 21 }

referenceStandard OBJECT-TYPE
    SYNTAX TypeReferenceStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video reference standard"
    ::= { paramEntry 22 }

referenceSelect OBJECT-TYPE
    SYNTAX TypeReferenceSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reference select"
    ::= { paramEntry 23 }

referenceInput OBJECT-TYPE
    SYNTAX TypeReferenceInput
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Reference input"
    ::= { paramEntry 24 }

sampleRate OBJECT-TYPE
    SYNTAX TypeSampleRate
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Sample rate"
    ::= { paramEntry 25 }

maxDelay OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Maximum Delay"
    ::= { paramEntry 26 }

delayPulseInput OBJECT-TYPE
    SYNTAX TypeDelayPulseInput
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device has delay pulse input"
    ::= { paramEntry 27 }

coupleStaticDelays OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Couple the static delay values of both inputs"
    ::= { paramEntry 28 }

aES1In OBJECT-TYPE
    SYNTAX TypeAES1In
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AES 1 input"
    ::= { paramEntry 29 }

sampleRateConversion1 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Sample rate conversion"
    ::= { paramEntry 30 }

swapLR1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Swap left/right mono channels"
    ::= { paramEntry 31 }

mute1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute this audio channel"
    ::= { paramEntry 32 }

bits1 OBJECT-TYPE
    SYNTAX TypeBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Bits"
    ::= { paramEntry 33 }

delay1 OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delay AES 1 [msec]"
    ::= { paramEntry 34 }

delayNormalize1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "delay 1 normalize display"
    ::= { paramEntry 35 }

pulse1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Apply delay pulse AES 1"
    ::= { paramEntry 36 }

aMute1 OBJECT-TYPE
    SYNTAX TypeAMute1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute by delay pulse AES 1"
    ::= { paramEntry 37 }

nDelay1 OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "NDelay AES 1 [msec]"
    ::= { paramEntry 38 }

out1 OBJECT-TYPE
    SYNTAX TypeOut1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Output 1 input selection"
    ::= { paramEntry 39 }

aES2In OBJECT-TYPE
    SYNTAX TypeAES1In
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AES 2 input"
    ::= { paramEntry 40 }

sampleRateConversion2 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Sample rate conversion"
    ::= { paramEntry 41 }

swapLR2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Swap left/right mono channels"
    ::= { paramEntry 42 }

mute2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute this audio channel"
    ::= { paramEntry 43 }

bits2 OBJECT-TYPE
    SYNTAX TypeBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Bits"
    ::= { paramEntry 44 }

delay2 OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delay AES 2 [msec]"
    ::= { paramEntry 45 }

delayNormalize2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "delay 2 normalize display"
    ::= { paramEntry 46 }

pulse2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Apply delay pulse AES 2"
    ::= { paramEntry 47 }

aMute2 OBJECT-TYPE
    SYNTAX TypeAMute1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute by delay pulse AES 2"
    ::= { paramEntry 48 }

nDelay2 OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "NDelay AES 2 [msec]"
    ::= { paramEntry 49 }

out2 OBJECT-TYPE
    SYNTAX TypeOut2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Output 2 input selection"
    ::= { paramEntry 50 }

pairingBuddy OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Rack position (frame / slot) of the paired PAD5212"
    ::= { paramEntry 51 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 52 }

eventnoinputAES1LeftSNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputAES1LeftSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: no input AES 1 Left (AES 1 Left input signal can not be detected)"
    ::= { paramEntry 53 }

eventnoinputAES1RightSNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputAES1LeftSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: no input AES 1 Right (AES 1 Right input signal can not be detected)"
    ::= { paramEntry 54 }

eventnoinputAES2LeftSNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputAES1LeftSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: no input AES 2 Left (AES 2 Left input signal can not be detected)"
    ::= { paramEntry 55 }

eventnoinputAES2RightSNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputAES1LeftSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: no input AES 2 Right (AES 2 Right input signal can not be detected)"
    ::= { paramEntry 56 }

eventnoreferenceSNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputAES1LeftSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: no reference (reference input signal can not be detected)"
    ::= { paramEntry 57 }

eventnonaudiodatainAES1SNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputAES1LeftSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: non-audio data in AES1 (AES 1 contains non-audio data)"
    ::= { paramEntry 58 }

eventnonaudiodatainAES2SNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputAES1LeftSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: non-audio data in AES2 (AES 2 contains non-audio data)"
    ::= { paramEntry 59 }

event525videoreferenceSNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputAES1LeftSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 525 video reference"
    ::= { paramEntry 60 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 61 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PAD5212-B-D parameters"
    ::= { sw127 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PAD5212-B-D parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventnoinputAES1Left OnOffValue,
    eventnoinputAES1Right OnOffValue,
    eventnoinputAES2Left OnOffValue,
    eventnoinputAES2Right OnOffValue,
    eventnoreference OnOffValue,
    eventnonaudiodatainAES1 OnOffValue,
    eventnonaudiodatainAES2 OnOffValue,
    event525videoreference OnOffValue,
    referenceStandard TypeReferenceStandard,
    referenceSelect TypeReferenceSelect,
    referenceInput TypeReferenceInput,
    sampleRate TypeSampleRate,
    maxDelay FixedPointValue3,
    delayPulseInput TypeDelayPulseInput,
    coupleStaticDelays OnOffValue,
    aES1In TypeAES1In,
    sampleRateConversion1 TypeSampleRateConversion1,
    swapLR1 OnOffValue,
    mute1 OnOffValue,
    bits1 TypeBits1,
    delay1 FixedPointValue3,
    delayNormalize1 OnOffValue,
    pulse1 OnOffValue,
    aMute1 TypeAMute1,
    nDelay1 FixedPointValue3,
    out1 TypeOut1,
    aES2In TypeAES1In,
    sampleRateConversion2 TypeSampleRateConversion1,
    swapLR2 OnOffValue,
    mute2 OnOffValue,
    bits2 TypeBits1,
    delay2 FixedPointValue3,
    delayNormalize2 OnOffValue,
    pulse2 OnOffValue,
    aMute2 TypeAMute1,
    nDelay2 FixedPointValue3,
    out2 TypeOut2,
    pairingBuddy DisplayString,
    boardID Integer32,
    eventnoinputAES1LeftSNMP TypeEventnoinputAES1LeftSNMP,
    eventnoinputAES1RightSNMP TypeEventnoinputAES1LeftSNMP,
    eventnoinputAES2LeftSNMP TypeEventnoinputAES1LeftSNMP,
    eventnoinputAES2RightSNMP TypeEventnoinputAES1LeftSNMP,
    eventnoreferenceSNMP TypeEventnoinputAES1LeftSNMP,
    eventnonaudiodatainAES1SNMP TypeEventnoinputAES1LeftSNMP,
    eventnonaudiodatainAES2SNMP TypeEventnoinputAES1LeftSNMP,
    event525videoreferenceSNMP TypeEventnoinputAES1LeftSNMP,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PAD5212-B-D"
    ::= { sw127 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventnoinputAES1Left,
        eventnoinputAES1Right,
        eventnoinputAES2Left,
        eventnoinputAES2Right,
        eventnoreference,
        eventnonaudiodatainAES1,
        eventnonaudiodatainAES2,
        event525videoreference,
        referenceStandard,
        referenceSelect,
        referenceInput,
        sampleRate,
        maxDelay,
        delayPulseInput,
        coupleStaticDelays,
        aES1In,
        sampleRateConversion1,
        swapLR1,
        mute1,
        bits1,
        delay1,
        delayNormalize1,
        pulse1,
        aMute1,
        nDelay1,
        out1,
        aES2In,
        sampleRateConversion2,
        swapLR2,
        mute2,
        bits2,
        delay2,
        delayNormalize2,
        pulse2,
        aMute2,
        nDelay2,
        out2,
        pairingBuddy,
        boardID,
        eventnoinputAES1LeftSNMP,
        eventnoinputAES1RightSNMP,
        eventnoinputAES2LeftSNMP,
        eventnoinputAES2RightSNMP,
        eventnoreferenceSNMP,
        eventnonaudiodatainAES1SNMP,
        eventnonaudiodatainAES2SNMP,
        event525videoreferenceSNMP,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END