-- Machine generated MIB file, do not edit!
--
-- MIB file for PAR5610, type code 07.CB, software label 426
-- Generated on Tuesday, 09-Aug-16 11:23:40 UTC
-- CVS $Id: PAR5610_07cb_sw426.mib,v 1.17 2016/08/09 11:23:42 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PAR5610-07cb-sw426-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

par5610-07cb-sw426 MODULE-IDENTITY
    LAST-UPDATED "201608091123Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PAR5610, type code 07.CB, software label 426"
    REVISION "201608091123Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 1995426 }

par5610-07cb OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PAR5610"
    ::= { products 1995 }

sw426 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 426"
    ::= { par5610-07cb 426 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeFreq ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        evenFreq(0),
        oddFreq(1),
        evenFreqX(2)
    }

TypeGPIFunc ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        freezeInput1(1),
        freezeInput2(2),
        freezeBothInputs(3),
        switchUserPresets(4)
    }

TypeInputStatusSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27)
    }

TypeConv3ControlMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        manual(0),
        aFDAutomated(1),
        wSSAutomated(2),
        vIAutomated(3)
    }

TypeConv3AspectInSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n43(0),
        n169(1)
    }

TypeConv3FormatOut ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n52543(0),
        n525169(1),
        n62543(2),
        n625169(3),
        n525(4),
        n625(5),
        n720p60(6),
        n720p5994(7),
        n720p50(8),
        n720p30(9),
        n720p2997(10),
        n720p25(11),
        n720p24(12),
        n720p2398(13),
        n1080i60(14),
        n1080i5994(15),
        n1080i50(16),
        n1080p30(17),
        n1080p2997(18),
        n1080p25(19),
        n1080p24(20),
        n1080p2398(21),
        n1080psF24(22),
        n1080psF2398(23)
    }

TypeConv3StatusOut ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        invalid(0),
        n525(1),
        n625(2),
        n720p60(3),
        n720p5994(4),
        n720p50(5),
        n720p30(6),
        n720p2997(7),
        n720p25(8),
        n720p24(9),
        n720p2398(10),
        n1080i60(11),
        n1080i5994(12),
        n1080i50(13),
        n1080p60(14),
        n1080p5994(15),
        n1080p50(16),
        n1080p30(17),
        n1080p2997(18),
        n1080p25(19),
        n1080p24(20),
        n1080p2398(21),
        n1080psF30(22),
        n1080psF2997(23),
        n1080psF25(24),
        n1080psF24(25),
        n1080psF2398(26)
    }

TypeConv3Mode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        pillarbox43Letterbox169(0),
        centerCut(1),
        n149Conversion(2),
        stretchToFill(3),
        custom(4)
    }

TypeConv3MetaAFDInStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        present(1)
    }

TypeConv3MetaCCCDPOutStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        present(1)
    }

TypeConv3MetaCCCDPSourcePrio1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        s334CDP(0),
        s334RAW(1),
        line21(2)
    }

TypeConv3MetaCCCDPSourcePrio2 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        s334CDP(1),
        s334RAW(2),
        line21(3)
    }

TypeConv3MetaTCLTCSourcePrio1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aTCLTC(0),
        aTCVITC(1),
        dVITCA(2),
        dVITCB(3)
    }

TypeConv3MetaTCLTCSourcePrio2 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        aTCLTC(1),
        aTCVITC(2),
        dVITCA(3),
        dVITCB(4)
    }

TypeConv3MetaTCDVITCInStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        present(1),
        presentX(2),
        presentXX(3)
    }

TypeConv3MetaTCDVITCADestination625 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n6(0),
        n7(1),
        n8(2),
        n9(3),
        n10(4),
        n11(5),
        n12(6),
        n13(7),
        n14(8),
        n15(9),
        n16(10),
        n17(11),
        n18(12),
        n19(13),
        n20(14),
        n21(15),
        n22(16)
    }

TypeConv3MetaTXTEncoderMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        wST625Only(1),
        s2031WST(2),
        oP47SDP(3)
    }

TypeConv3MetaTXTLinesSelectionMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        manual(1)
    }

TypeConv3MetaField1Overflow ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        no(0),
        yes(1)
    }

TypeConv3MetaSMPTE2020Status ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        methodA(1),
        methodB(2)
    }

TypeConv3ModeAutoARto169 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        boxed(0),
        cut(1),
        stretch(2)
    }

TypeConv3InsertAFDFullFrame169 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n1000(0),
        n1010(1)
    }

TypeConv3ModeAutoFallback ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        useLastValidFormatDescr(0),
        useManualSettings(1)
    }

TypeSDIIn1TXTDecoderMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        autoSelect(0),
        wST625Only(1),
        s2031WST(2),
        oP47SDP(3)
    }

TypeSDIIn1TCDVITCASource625 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        n6(1),
        n7(2),
        n8(3),
        n9(4),
        n10(5),
        n11(6),
        n12(7),
        n13(8),
        n14(9),
        n15(10),
        n16(11),
        n17(12),
        n18(13),
        n19(14),
        n20(15),
        n21(16),
        n22(17)
    }

TypeOut1Assign ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input1(0),
        hiQConverter(1)
    }

TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        black(0),
        red(1),
        green(2),
        blue(3),
        cyan(4),
        magenta(5),
        yellow(6),
        white(7),
        n15Grey(8),
        eQPath(9),
        pLLPath(10),
        eQPLLPath(11),
        n75Colorbar(12),
        colorbarOverRed(13)
    }

TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n525(0),
        n625(1),
        n720p60(2),
        n720p5994(3),
        n720p50(4),
        n720p30(5),
        n720p2997(6),
        n720p25(7),
        n720p24(8),
        n720p2398(9),
        n1080i60(10),
        n1080i5994(11),
        n1080i50(12),
        n1080p30(13),
        n1080p2997(14),
        n1080p25(15),
        n1080p24(16),
        n1080p2398(17),
        n1080psF24(18),
        n1080psF2398(19),
        followLastInput(20)
    }

TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freeze(0),
        black(1),
        testPattern(2)
    }

TypeOut1ModifyPsF ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        pToPsf(1),
        psfToP(2)
    }

TypeDelayPulseAssign ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        sDIOut1(0),
        sDIOut2(1)
    }

TypePresetsGPIOn ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        current(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypeGenLockStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unlocked(0),
        locked(1)
    }

TypeAudioContentSDI11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeAudioContentStatusSDI11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeOut1MetaS352Insertion ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeOut1MetaAFDLine ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        n8(1),
        n9(2),
        n10(3),
        n11(4),
        n12(5),
        n13(6),
        n14(7),
        n15(8),
        n16(9),
        n17(10),
        n18(11),
        n19(12),
        n20(13),
        n21(14),
        n22(15),
        n23(16),
        n24(17),
        n25(18),
        n26(19),
        n27(20),
        n28(21),
        n29(22),
        n30(23),
        n31(24),
        n32(25),
        n33(26),
        n34(27),
        n35(28),
        n36(29),
        n37(30),
        n38(31),
        n39(32),
        n40(33),
        n41(34)
    }

TypeOut1MetaATCLTCLocation ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        vanc(0),
        hanc(1)
    }

TypeSDIIn1StatusAFD ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        n0010LetterboxTopImageInA43Frame(1),
        n0011Letterbox149ImageInA43Frame(2),
        n0100169LetterboxCenterImageInA43Frame(3),
        n1000FullFrameImageInA43Frame(4),
        n1001FullFrameImageInA43Frame(5),
        n1010169LetterboxImageVerticallyCenteredInA43Frame(6),
        n1011149LetterboxImageVerticallyCenteredInA43Frame(7),
        n110143ImageShootProtect149InA43Frame(8),
        n1110169LetterboxImageShootProtect149InA43Frame(9),
        n1111169LetterboxImageShootProtect43InA43Frame(10),
        n0010169FullFrameImageInA169Frame(11),
        n0011149PillarboxImageInA169Frame(12),
        n0100169LetterboxCenterImageInA169Frame(13),
        n1000FullFrameImageInA169Frame(14),
        n1001PillarboxImageInA169Frame(15),
        n1010Protected169FullFrameImageInA169Frame(16),
        n1011149PillarboxImageInA169Frame(17),
        n110143PillarboxImageShootProtect149InA169Frame(18),
        n1110169ImageShootProtect149InA169Frame(19),
        n1111169ImageShootProtect43InA169Frame(20)
    }

TypeSDIIn1StatusWSS ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        fullFormat43(1),
        box149Center(2),
        box149Top(3),
        box169Center(4),
        box169Top(5),
        box169CenterX(6),
        fullFormat169CenterAndProtected149(7),
        fullFormat169Anamorphic(8)
    }

TypeSDIIn1StatusVI ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        n52543(1),
        n62543(2),
        n525169(3),
        n625169(4)
    }

TypeSDIIn1AFDLine ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        n8(1),
        n9(2),
        n10(3),
        n11(4),
        n12(5),
        n13(6),
        n14(7),
        n15(8),
        n16(9),
        n17(10),
        n18(11),
        n19(12),
        n20(13),
        n21(14),
        n22(15),
        n23(16),
        n24(17),
        n25(18),
        n26(19),
        n27(20),
        n28(21),
        n29(22),
        n30(23),
        n31(24),
        n32(25),
        n33(26),
        n34(27),
        n35(28),
        n36(29),
        n37(30),
        n38(31),
        n39(32),
        n40(33),
        n41(34)
    }

TypeSDIIn1StatusFormatReactOnChange ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        delayed(0),
        quick(1)
    }

TypeOut1DelayMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        framesLinesPixels(0),
        milliSeconds(1)
    }

TypeOut1FreezeMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeField1(0),
        freezeField2(1),
        freezeFrame(2),
        testPattern(3)
    }

TypePresetsSaveAs ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypeEventSDIInput1NoInputSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventSDIInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 1 No Input"
    ::= { paramEntry 14 }

eventFanFailure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Fan Failure"
    ::= { paramEntry 15 }

eventHighTemperature OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: High Temperature"
    ::= { paramEntry 16 }

channel2CoupleTo1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI-Output Channel 2: couple all selections to channel 1"
    ::= { paramEntry 19 }

freq OBJECT-TYPE
    SYNTAX TypeFreq
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
    ::= { paramEntry 20 }

gPIFunc OBJECT-TYPE
    SYNTAX TypeGPIFunc
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify influence of GPI input"
    ::= { paramEntry 21 }

inputStatusSDI1 OBJECT-TYPE
    SYNTAX TypeInputStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of SDI input channel 1"
    ::= { paramEntry 22 }

conv3ControlMode OBJECT-TYPE
    SYNTAX TypeConv3ControlMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select control mode of converter 3"
    ::= { paramEntry 23 }

conv3AspectInSelect OBJECT-TYPE
    SYNTAX TypeConv3AspectInSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Aspect Ratio of Input signal - Converter 3
The auto setting will be interpreted as:
- 16:9 (HDTV)
- 4:3 (SDTV)"
    ::= { paramEntry 24 }

conv3AspectIn OBJECT-TYPE
    SYNTAX TypeConv3AspectInSelect
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Current Aspect Ratio of Input signal - Converter 3"
    ::= { paramEntry 25 }

conv3FormatOut OBJECT-TYPE
    SYNTAX TypeConv3FormatOut
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Signal format of scaler output"
    ::= { paramEntry 26 }

conv3StatusOut OBJECT-TYPE
    SYNTAX TypeConv3StatusOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Display signal format of output - Converter 3"
    ::= { paramEntry 27 }

conv3Mode OBJECT-TYPE
    SYNTAX TypeConv3Mode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Conversion mode of Converter 3"
    ::= { paramEntry 28 }

conv3AdvancedSettings OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Activate advanced settings from HiQ Scaler"
    ::= { paramEntry 29 }

conv3OutInsertAFD OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert Active format description into the video data from HiQ Scaler"
    ::= { paramEntry 30 }

conv3OutInsertVI OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert Video Index into the video data from HiQ Scaler"
    ::= { paramEntry 31 }

conv3OutInsertWSS OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert Wide Screen Signaling into the video data from HiQ Scaler"
    ::= { paramEntry 32 }

conv3StatusIn OBJECT-TYPE
    SYNTAX TypeConv3StatusOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Display signal format of input - Converter 3"
    ::= { paramEntry 33 }

conv3CropHpos OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "HiQ Converter: start cutout (crop) from input image at this H position (pixel)"
    ::= { paramEntry 34 }

conv3CropVpos OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "HiQ Converter: start cutout (crop) from input image at this V position (lines)"
    ::= { paramEntry 35 }

conv3CropHsize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "HiQ Converter: cutout (crop) from input image this many pixels"
    ::= { paramEntry 36 }

conv3CropVsize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "HiQ Converter: cutout (crop) from input image this many lines"
    ::= { paramEntry 37 }

conv3InsertHpos OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "HiQ Converter: start insertion of source-cutout into output at this H position (pixel)"
    ::= { paramEntry 38 }

conv3InsertVpos OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "HiQ Converter: start insertion of source-cutout into output at this V position (lines)"
    ::= { paramEntry 39 }

conv3InsertHsize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "HiQ Converter: insert source-cutout into output in this many pixels"
    ::= { paramEntry 40 }

conv3InsertVsize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "HiQ Converter: insert source-cutout into output in this many lines"
    ::= { paramEntry 41 }

conv3MotionAdaptive OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Motion adaptive filtering / de-interlacing"
    ::= { paramEntry 42 }

conv3MetaAdvancedSettings OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Activate advanced Meta Data settings of converter 3"
    ::= { paramEntry 43 }

conv3MetaCCSourceDefaultPriorities OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set source priority for insertion of Close Caption to default for converter 3"
    ::= { paramEntry 44 }

conv3MetaTCSourceDefaultPriorities OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set source priority for insertion of Time Code to default for converter 3"
    ::= { paramEntry 45 }

conv3MetaAFDInStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AFD detection on input of converter 3"
    ::= { paramEntry 46 }

conv3MetaVIInStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "VI detection on input of converter 3"
    ::= { paramEntry 47 }

conv3MetaWSSInStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "WSS detection on input of converter 3"
    ::= { paramEntry 48 }

conv3MetaCCCDPOutStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPOutStatus
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insertion Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at output of converter 3"
    ::= { paramEntry 49 }

conv3MetaCCCDPInStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at input of converter 3"
    ::= { paramEntry 50 }

conv3MetaCCCDPInsertion OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable insertion of CloseCaptions in S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3"
    ::= { paramEntry 51 }

conv3MetaCCCDPSourcePrio1 OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPSourcePrio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
    ::= { paramEntry 52 }

conv3MetaCCCDPSourcePrio2 OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
    ::= { paramEntry 53 }

conv3MetaCCCDPSourcePrio3 OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
    ::= { paramEntry 54 }

conv3MetaCCRAWOutStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPOutStatus
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insertion Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at output of converter 3"
    ::= { paramEntry 55 }

conv3MetaCCRAWInStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at input of converter 3"
    ::= { paramEntry 56 }

conv3MetaCCRAWInsertion OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable insertion of CloseCaptions in S334 RAW transport packet (containing CEA-608 data) into output of converter 3"
    ::= { paramEntry 57 }

conv3MetaCCRAWSourcePrio1 OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPSourcePrio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
    ::= { paramEntry 58 }

conv3MetaCCRAWSourcePrio2 OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
    ::= { paramEntry 59 }

conv3MetaCCRAWSourcePrio3 OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
    ::= { paramEntry 60 }

conv3MetaCCL21OutStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPOutStatus
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insertion Status of CloseCaptions as Line 21 (containing CEA-608 data) at  output of converter 3"
    ::= { paramEntry 61 }

conv3MetaCCL21InStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence status of CloseCaptions as Line 21 (containing CEA-608 data) at input of converter 3"
    ::= { paramEntry 62 }

conv3MetaCCL21Insertion OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable insertion of CloseCaptions in Line 21 (containing CEA-608 data) into output of converter 3"
    ::= { paramEntry 63 }

conv3MetaCCL21SourcePrio1 OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPSourcePrio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
    ::= { paramEntry 64 }

conv3MetaCCL21SourcePrio2 OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
    ::= { paramEntry 65 }

conv3MetaCCL21SourcePrio3 OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
    ::= { paramEntry 66 }

conv3MetaTCLTCInStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence status of TimeCode as ATC-LTC at input of converter 3"
    ::= { paramEntry 67 }

conv3MetaTCLTCInsertion OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable insertion of TimeCode as ATC-LTC into output of converter 3"
    ::= { paramEntry 68 }

conv3MetaTCLTCSourcePrio1 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCLTCSourcePrio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 1 Source-channel for TimeCode  to be inserted as ATC-LTC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
    ::= { paramEntry 69 }

conv3MetaTCLTCSourcePrio2 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCLTCSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
    ::= { paramEntry 70 }

conv3MetaTCLTCSourcePrio3 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCLTCSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-LTC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
    ::= { paramEntry 71 }

conv3MetaTCVITCInStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence status of TimeCode as ATC-VITC at input of converter 3"
    ::= { paramEntry 72 }

conv3MetaTCVITCInsertion OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable insertion of TimeCode as ATC-VITC into output of converter 3"
    ::= { paramEntry 73 }

conv3MetaTCVITCSourcePrio1 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCLTCSourcePrio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 1 Source-channel for TimeCode  to be inserted as ATC-VITC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
    ::= { paramEntry 74 }

conv3MetaTCVITCSourcePrio2 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCLTCSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
    ::= { paramEntry 75 }

conv3MetaTCVITCSourcePrio3 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCLTCSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-VITC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
    ::= { paramEntry 76 }

conv3MetaTCDVITCInStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaTCDVITCInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence status of TimeCode as DVITC at input of converter 3"
    ::= { paramEntry 77 }

conv3MetaTCDVITCInsertion OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable insertion of TimeCode as DVITC into output of converter 3"
    ::= { paramEntry 78 }

conv3MetaTCDVITCSourcePrio1 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCLTCSourcePrio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 1 Source-channel for TimeCode  to be inserted as DVITC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
    ::= { paramEntry 79 }

conv3MetaTCDVITCSourcePrio2 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCLTCSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as DVITC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
    ::= { paramEntry 80 }

conv3MetaTCDVITCSourcePrio3 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCLTCSourcePrio2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as DVITC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
    ::= { paramEntry 81 }

conv3MetaTCLTCOutStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPOutStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Insertion status of TimeCode as ATC-LTC on output of converter 3"
    ::= { paramEntry 82 }

conv3MetaTCVITCOutStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPOutStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Insertion status of TimeCode as ATC-VITC on output of converter 3"
    ::= { paramEntry 83 }

conv3MetaTCDVITCAOutStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPOutStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Insertion status of TimeCode as DVITC-A on output of converter 3"
    ::= { paramEntry 84 }

conv3MetaTCDVITCBOutStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaCCCDPOutStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Insertion status of TimeCode as DVITC-B on output of converter 3"
    ::= { paramEntry 85 }

conv3MetaTCDVITCADestination625 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCDVITCADestination625
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 3 (for even frequency standards)"
    ::= { paramEntry 86 }

conv3MetaTCDVITCBDestination625 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCDVITCADestination625
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 3 (for even frequency standards)"
    ::= { paramEntry 87 }

conv3MetaTCDVITCADestination525 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCDVITCADestination625
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 3 (for odd frequency standards)"
    ::= { paramEntry 88 }

conv3MetaTCDVITCBDestination525 OBJECT-TYPE
    SYNTAX TypeConv3MetaTCDVITCADestination625
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 3 (for odd frequency standards)"
    ::= { paramEntry 89 }

conv3MetaTCDVITCADetectedSrcLine OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Information on the video line in which the DVITC-A TimeCode has been detected in the input of converter 3"
    ::= { paramEntry 90 }

conv3MetaTCDVITCBDetectedSrcLine OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Information on the video line in which the DVITC-B TimeCode has been detected in the input of converter 3"
    ::= { paramEntry 91 }

conv3MetaTCVITCDetectedDVITCLine OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Information on the video line in which the incoming VITC shall be inserted into the output of converter 3, when it is encoded as DVITC."
    ::= { paramEntry 92 }

conv3MetaTCDVITCAutomatic OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable automatic selection of DVITC line for insertion on output of converter 3"
    ::= { paramEntry 93 }

conv3MetaTXTWSTInStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence status of Teletext as WST at input of converter 3"
    ::= { paramEntry 94 }

conv3MetaTXTS2031InStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence status of Teletext as S2031 transport packet at input of converter 3"
    ::= { paramEntry 95 }

conv3MetaTXTOP47InStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence status of Teletext as OP47 Subtitling Distribution Packet at input of converter 3"
    ::= { paramEntry 96 }

conv3MetaTXTEncoderMode OBJECT-TYPE
    SYNTAX TypeConv3MetaTXTEncoderMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Teletext Encoder Settings of converter 3"
    ::= { paramEntry 97 }

conv3MetaTXTLinesSelectionMode OBJECT-TYPE
    SYNTAX TypeConv3MetaTXTLinesSelectionMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Teletext lines selection mode of converter 3"
    ::= { paramEntry 98 }

conv3MetaField1Overflow OBJECT-TYPE
    SYNTAX TypeConv3MetaField1Overflow
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 1 at output of converter 3"
    ::= { paramEntry 105 }

conv3MetaField2Overflow OBJECT-TYPE
    SYNTAX TypeConv3MetaField1Overflow
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 2 at output of converter 3"
    ::= { paramEntry 106 }

conv3MetaSMPTE2020Status OBJECT-TYPE
    SYNTAX TypeConv3MetaSMPTE2020Status
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence status of Meta Data SMPTE 2020 transport packet at input of converter 3"
    ::= { paramEntry 107 }

conv3MetaSMPTE2020Insertion OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable insertion of Meta Data SMPTE 2020 transport packet at output of converter 3"
    ::= { paramEntry 108 }

conv3ModeAutoARto169 OBJECT-TYPE
    SYNTAX TypeConv3ModeAutoARto169
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Automatic Aspect Ratio to 16:9 mode for Converter 3"
    ::= { paramEntry 109 }

conv3ModeAutoARto43 OBJECT-TYPE
    SYNTAX TypeConv3ModeAutoARto169
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Automatic Aspect Ratio to 4:3 mode for Converter 3"
    ::= { paramEntry 110 }

conv3InsertAFDFullFrame169 OBJECT-TYPE
    SYNTAX TypeConv3InsertAFDFullFrame169
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "AFD Full Frame 16:9 mode for Converter 3"
    ::= { paramEntry 111 }

conv3ModeAutoFallback OBJECT-TYPE
    SYNTAX TypeConv3ModeAutoFallback
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Auto Fallback mode for Converter 3"
    ::= { paramEntry 112 }

sDIIn1TXTWSTInStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence Status of Teletext as WST at SDI Input 1"
    ::= { paramEntry 113 }

sDIIn1TXTS2031InStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence Status of Teletext as S2031 transport packet at SDI Input 1"
    ::= { paramEntry 114 }

sDIIn1TXTOP47InStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence Status of Teletext as OP47 transport packet at SDI Input 1"
    ::= { paramEntry 115 }

sDIIn1TXTDecoderMode OBJECT-TYPE
    SYNTAX TypeSDIIn1TXTDecoderMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Teletext Decoder Settings at SDI Input 1"
    ::= { paramEntry 116 }

sDIIn1TCDVITCASource625 OBJECT-TYPE
    SYNTAX TypeSDIIn1TCDVITCASource625
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 1 (for even-frequency standards)"
    ::= { paramEntry 117 }

sDIIn1TCDVITCBSource625 OBJECT-TYPE
    SYNTAX TypeSDIIn1TCDVITCASource625
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 1 (for even-frequency standards)"
    ::= { paramEntry 118 }

sDIIn1TCDVITCASource525 OBJECT-TYPE
    SYNTAX TypeSDIIn1TCDVITCASource625
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 1 (for odd-frequency standards)"
    ::= { paramEntry 119 }

sDIIn1TCDVITCBSource525 OBJECT-TYPE
    SYNTAX TypeSDIIn1TCDVITCASource625
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 1 (for odd-frequency standards)"
    ::= { paramEntry 120 }

sDIIn1CCCDPStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at SDI Input 1"
    ::= { paramEntry 121 }

sDIIn1CCRAWStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at SDI Input 1"
    ::= { paramEntry 122 }

sDIIn1CCL21Status OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence Status of CloseCaptions as Line 21 (containing CEA-608 data) at SDI Input 1"
    ::= { paramEntry 123 }

sDIIn1TCLTCStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence Status of TimeCode as ATC-LTC at SDI Input 1"
    ::= { paramEntry 124 }

sDIIn1TCVITCStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaAFDInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence Status of TimeCode as ATC-VITC at SDI Input 1"
    ::= { paramEntry 125 }

sDIIn1TCDVITCStatus OBJECT-TYPE
    SYNTAX TypeConv3MetaTCDVITCInStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence Status of TimeCode as DVITC at SDI Input 1"
    ::= { paramEntry 126 }

out1Assign OBJECT-TYPE
    SYNTAX TypeOut1Assign
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assign SDI Out 1 to Input (direct) or to one of the Converters"
    ::= { paramEntry 127 }

out1Standard OBJECT-TYPE
    SYNTAX TypeConv3StatusOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI Out 1"
    ::= { paramEntry 128 }

out2Assign OBJECT-TYPE
    SYNTAX TypeOut1Assign
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assign SDI Out 2 to Input (direct) or to one of the Converters"
    ::= { paramEntry 129 }

out2Standard OBJECT-TYPE
    SYNTAX TypeConv3StatusOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI Out 2"
    ::= { paramEntry 130 }

out1DelayFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in frames. Combine with Out1/DelayLines and Out1/DelayPixel for total delay"
    ::= { paramEntry 131 }

out1DelayLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in lines. Combine with Out1/DelayFrames and Out1/DelayPixel for total delay"
    ::= { paramEntry 132 }

out1DelayPixel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in pixel. Combine with Out1/DelayFrames and Out1/DelayLines for total delay"
    ::= { paramEntry 133 }

out1DelayMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 user delay in milliseconds."
    ::= { paramEntry 134 }

out1ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable aperture correction"
    ::= { paramEntry 135 }

out1ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: aperture correction level"
    ::= { paramEntry 136 }

out1HBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable H-Blanking"
    ::= { paramEntry 137 }

out1VBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable V-Blanking"
    ::= { paramEntry 138 }

out1Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust Video Gain"
    ::= { paramEntry 139 }

out1Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Saturation"
    ::= { paramEntry 140 }

out1BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
    ::= { paramEntry 141 }

out1Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Hue"
    ::= { paramEntry 142 }

out1TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 143 }

out1TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 144 }

out1TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable preselected test pattern"
    ::= { paramEntry 145 }

out1IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 146 }

out1ModifyPsF OBJECT-TYPE
    SYNTAX TypeOut1ModifyPsF
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.<br>This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
    ::= { paramEntry 147 }

out2DelayFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in frames. Combine with Out2/DelayLines and Out2/DelayPixel for total delay"
    ::= { paramEntry 148 }

out2DelayLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in lines. Combine with Out2/DelayFrames and Out2/DelayPixel for total delay"
    ::= { paramEntry 149 }

out2DelayPixel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in pixel. Combine with Out2/DelayFrames and Out2/DelayLines for total delay"
    ::= { paramEntry 150 }

out2DelayMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 user delay in milliseconds."
    ::= { paramEntry 151 }

out2ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable aperture correction"
    ::= { paramEntry 152 }

out2ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: aperture correction level"
    ::= { paramEntry 153 }

out2HBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable H-Blanking"
    ::= { paramEntry 154 }

out2VBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable V-Blanking"
    ::= { paramEntry 155 }

out2Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust Video Gain"
    ::= { paramEntry 156 }

out2Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video Saturation"
    ::= { paramEntry 157 }

out2BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video black level (in IRE)"
    ::= { paramEntry 158 }

out2Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video Hue"
    ::= { paramEntry 159 }

out2TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 160 }

out2TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out2/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 161 }

out2TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable preselected test pattern"
    ::= { paramEntry 162 }

out2IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 163 }

out2ModifyPsF OBJECT-TYPE
    SYNTAX TypeOut1ModifyPsF
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.<br>This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
    ::= { paramEntry 164 }

temperatureMAX1617Int OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PCB temperature (MAX1617) in C"
    ::= { paramEntry 167 }

temperatureMAX1617Ext OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "FPGA temperature in C"
    ::= { paramEntry 168 }

delayPulseAssign OBJECT-TYPE
    SYNTAX TypeDelayPulseAssign
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assign the Delay Pulse Output to one of the SDI Outputs.
The generated Delay Pulse will represent the exact amount of time that the video signal on this output has been delayed from SDI-Input to SDI-Output."
    ::= { paramEntry 169 }

presetsGPIOn OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 170 }

presetsGPIOff OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 171 }

genLockStatus OBJECT-TYPE
    SYNTAX TypeGenLockStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Lock-Status of LMH1982"
    ::= { paramEntry 172 }

inputToRefDelay1H OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Horizontal delay between Input 1 and Reference"
    ::= { paramEntry 173 }

inputToRefDelay1V OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Vertical delay between Input 1 and Reference"
    ::= { paramEntry 174 }

inputToRefDelay2H OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "InputToRefDelay2H"
    ::= { paramEntry 175 }

inputToRefDelay2V OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "InputToRefDelay2V"
    ::= { paramEntry 176 }

audioContentSDI11 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of SDI-audio group 1.1"
    ::= { paramEntry 177 }

audioContentSDI12 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of SDI-audio group 1.2"
    ::= { paramEntry 178 }

audioContentSDI13 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of SDI-audio group 1.3"
    ::= { paramEntry 179 }

audioContentSDI14 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of SDI-audio group 1.4"
    ::= { paramEntry 180 }

audioContentSDI15 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of SDI-audio group 1.5"
    ::= { paramEntry 181 }

audioContentSDI16 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of SDI-audio group 1.6"
    ::= { paramEntry 182 }

audioContentSDI17 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of SDI-audio group 1.7"
    ::= { paramEntry 183 }

audioContentSDI18 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of SDI-audio group 1.8"
    ::= { paramEntry 184 }

audioContentStatusSDI11 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.1"
    ::= { paramEntry 185 }

audioContentStatusSDI12 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.2"
    ::= { paramEntry 186 }

audioContentStatusSDI13 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.3"
    ::= { paramEntry 187 }

audioContentStatusSDI14 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.4"
    ::= { paramEntry 188 }

audioContentStatusSDI15 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.5"
    ::= { paramEntry 189 }

audioContentStatusSDI16 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.6"
    ::= { paramEntry 190 }

audioContentStatusSDI17 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.7"
    ::= { paramEntry 191 }

audioContentStatusSDI18 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.8"
    ::= { paramEntry 192 }

out1MetaLineSelectionMode OBJECT-TYPE
    SYNTAX TypeConv3MetaTXTLinesSelectionMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify mode of operation for selecting ANC-lines for insertion of MetaData into Output 1. By default (automatic) the selections will be chosen according to appropriate standard recommendations. In manual mode, you are fully responsible for compliance with the current video standard."
    ::= { paramEntry 193 }

out1MetaS352Insertion OBJECT-TYPE
    SYNTAX TypeOut1MetaS352Insertion
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable insertion of SMPTE 352 (VPID) at Output 1"
    ::= { paramEntry 194 }

out1MetaAFDLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of AFD data packet into Output 1"
    ::= { paramEntry 195 }

out1MetaCCCDPLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into Output 1"
    ::= { paramEntry 196 }

out1MetaCCRAWLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) into Output 1"
    ::= { paramEntry 197 }

out1MetaS2020Line OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of SMPTE2020 data packets into Output 1"
    ::= { paramEntry 198 }

out1MetaS2031WSTLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify first video line for insertion of SMPTE2031 WST (teletext) data packets into Output 1. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
    ::= { paramEntry 199 }

out1MetaOP47WSTLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify first video line for insertion of OP47 WST (teletext) data packets into Output 1. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
    ::= { paramEntry 200 }

out1MetaATCLTCLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of ATC-LTC data packets into Output 1"
    ::= { paramEntry 201 }

out1MetaATCVITCLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of ATC-VITC data packets into Output 1"
    ::= { paramEntry 202 }

out1MetaATCLTCLocation OBJECT-TYPE
    SYNTAX TypeOut1MetaATCLTCLocation
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify if ATC-LTC data packets are inserted as HANC or VANC packets at Output 1"
    ::= { paramEntry 203 }

out1MetaATCVITCLocation OBJECT-TYPE
    SYNTAX TypeOut1MetaATCLTCLocation
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify if ATC-VITC data packets are inserted as HANC or VANC packets at Output 1"
    ::= { paramEntry 204 }

out1MetaOP47FieldInversion OBJECT-TYPE
    SYNTAX TypeOut1MetaS352Insertion
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Invert the field bit when generating a OP47 WST (teletext) data packet on SDI output 1.
This function can be used to compensate for downstream equipment that interprets the OP47 WST packets using the wrong polarity."
    ::= { paramEntry 205 }

out2MetaLineSelectionMode OBJECT-TYPE
    SYNTAX TypeConv3MetaTXTLinesSelectionMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify mode of operation for selecting ANC-lines for insertion of MetaData into Output 2. By default (automatic) the selections will be chosen according to appropriate standard recommendations. In manual mode, you are fully responsible for compliance with the current video standard."
    ::= { paramEntry 207 }

out2MetaS352Insertion OBJECT-TYPE
    SYNTAX TypeOut1MetaS352Insertion
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable insertion of SMPTE 352 (VPID) at Output 2"
    ::= { paramEntry 208 }

out2MetaAFDLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of AFD data packet into Output 2"
    ::= { paramEntry 209 }

out2MetaCCCDPLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into Output 2"
    ::= { paramEntry 210 }

out2MetaCCRAWLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) into Output 2"
    ::= { paramEntry 211 }

out2MetaS2020Line OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of SMPTE2020 data packets into Output 2"
    ::= { paramEntry 212 }

out2MetaS2031WSTLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify first video line for insertion of SMPTE2031 WST (teletext) data packets into Output 2. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
    ::= { paramEntry 213 }

out2MetaOP47WSTLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify first video line for insertion of OP47 WST (teletext) data packets into Output 2. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
    ::= { paramEntry 214 }

out2MetaATCLTCLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of ATC-LTC data packets into Output 2"
    ::= { paramEntry 215 }

out2MetaATCVITCLine OBJECT-TYPE
    SYNTAX TypeOut1MetaAFDLine
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify video line for insertion of ATC-VITC data packets into Output 2"
    ::= { paramEntry 216 }

out2MetaATCLTCLocation OBJECT-TYPE
    SYNTAX TypeOut1MetaATCLTCLocation
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify if ATC-LTC data packets are inserted as HANC or VANC packets at Output 2"
    ::= { paramEntry 217 }

out2MetaATCVITCLocation OBJECT-TYPE
    SYNTAX TypeOut1MetaATCLTCLocation
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify if ATC-VITC data packets are inserted as HANC or VANC packets at Output 2"
    ::= { paramEntry 218 }

out2MetaOP47FieldInversion OBJECT-TYPE
    SYNTAX TypeOut1MetaS352Insertion
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Invert the field bit when generating a OP47 WST (teletext) data packet on SDI output 2.
This function can be used to compensate for downstream equipment that interprets the OP47 WST packets using the wrong polarity."
    ::= { paramEntry 219 }

sDIIn1StatusAFD OBJECT-TYPE
    SYNTAX TypeSDIIn1StatusAFD
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Detected AFD code on SDI input 1"
    ::= { paramEntry 221 }

sDIIn1StatusWSS OBJECT-TYPE
    SYNTAX TypeSDIIn1StatusWSS
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Detected WSS code on SDI input 1"
    ::= { paramEntry 222 }

sDIIn1StatusVI OBJECT-TYPE
    SYNTAX TypeSDIIn1StatusVI
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Detected VI code on SDI input 1"
    ::= { paramEntry 223 }

sDIIn1AFDLine OBJECT-TYPE
    SYNTAX TypeSDIIn1AFDLine
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video line detection of AFD data packet on SDI input 1"
    ::= { paramEntry 224 }

sDIIn1CCCDPLine OBJECT-TYPE
    SYNTAX TypeSDIIn1AFDLine
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video line detection of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) on SDI input 1"
    ::= { paramEntry 225 }

sDIIn1CCRAWLine OBJECT-TYPE
    SYNTAX TypeSDIIn1AFDLine
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video line detection of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) on SDI input 1"
    ::= { paramEntry 226 }

sDIIn1S2020Line OBJECT-TYPE
    SYNTAX TypeSDIIn1AFDLine
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video line detection of SMPTE2020 data packets on SDI input 1"
    ::= { paramEntry 227 }

sDIIn1S2031WSTFirstLine OBJECT-TYPE
    SYNTAX TypeSDIIn1AFDLine
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Detection first video line of SMPTE2031 WST (teletext) data packets on SDI input 1."
    ::= { paramEntry 228 }

sDIIn1S2031WSTLastLine OBJECT-TYPE
    SYNTAX TypeSDIIn1AFDLine
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Detection last video line of SMPTE2031 WST (teletext) data packets on SDI input 1."
    ::= { paramEntry 229 }

sDIIn1OP47WSTFirstLine OBJECT-TYPE
    SYNTAX TypeSDIIn1AFDLine
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Detection first video line of OP47 WST (teletext) data packets on SDI input 1"
    ::= { paramEntry 230 }

sDIIn1OP47WSTLastLine OBJECT-TYPE
    SYNTAX TypeSDIIn1AFDLine
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Detection last video line of OP47 WST (teletext) data packets on SDI input 1"
    ::= { paramEntry 231 }

sDIIn1ATCLTCLine OBJECT-TYPE
    SYNTAX TypeSDIIn1AFDLine
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video line detection of ATC-LTC data packets on SDI input 1"
    ::= { paramEntry 232 }

sDIIn1ATCVITCLine OBJECT-TYPE
    SYNTAX TypeSDIIn1AFDLine
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video line detection of ATC-VITC data packets on SDI input 1"
    ::= { paramEntry 233 }

sDIIn1ATCLTCLocation OBJECT-TYPE
    SYNTAX TypeOut1MetaATCLTCLocation
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Detection if ATC-LTC data packets are present as HANC or VANC packets on SDI input 1"
    ::= { paramEntry 234 }

sDIIn1ATCVITCLocation OBJECT-TYPE
    SYNTAX TypeOut1MetaATCLTCLocation
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Detection if ATC-VITC data packets are present as HANC or VANC packets on SDI input 1"
    ::= { paramEntry 235 }

sDIIn1OP47FieldInversion OBJECT-TYPE
    SYNTAX TypeOut1MetaS352Insertion
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Invert the field bit when interpreting an OP47 WST (teletext) data packet on SDI input 1.
This function can be used to compensate for an inserter of OP47 WST packets that appliesthe field bits with wrong polarity."
    ::= { paramEntry 236 }

sDIIn1StatusFormatReactOnChange OBJECT-TYPE
    SYNTAX TypeSDIIn1StatusFormatReactOnChange
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "specify if a reaction to CHANGE of format description (AFD, WSS, VI) in SDI Input 1 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable."
    ::= { paramEntry 237 }

sDIIn1StatusFormatReactOnLoss OBJECT-TYPE
    SYNTAX TypeSDIIn1StatusFormatReactOnChange
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "specify if a reaction to LOSS  of format description (AFD, WSS, VI) in SDI Input 1 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable"
    ::= { paramEntry 238 }

snapToReferenceFrameLength OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "When set to ON, the minimum total video processing time is set to be equal to the length of one video-frame of the reference standard. E.g. synchronizing a 720p50 SDI to a 625 REF will delay the SDI by minimum 40ms (instead of 20ms).This mode can only be used with synchronous SDI inputs.The default value is OFF."
    ::= { paramEntry 239 }

out1ClipHeadroom OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: Clips Y code values outside the range of 40h to 3ACh
 and Cr, Cb code values outside the range of 40h to 3C0h."
    ::= { paramEntry 240 }

out2ClipHeadroom OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: Clips Y code values outside the range of 40h to 3ACh
 and Cr, Cb code values outside the range of 40h to 3C0h."
    ::= { paramEntry 241 }

out1FixedProcTime OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: Set the video processing time to a fixed value, independent of the current mode of operation"
    ::= { paramEntry 242 }

out2FixedProcTime OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: Set the video processing time to a fixed value, independent of the current mode of operation"
    ::= { paramEntry 243 }

out1DelayMode OBJECT-TYPE
    SYNTAX TypeOut1DelayMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select delay mode of SDI Out 1"
    ::= { paramEntry 244 }

out2DelayMode OBJECT-TYPE
    SYNTAX TypeOut1DelayMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select delay mode of SDI Out 2"
    ::= { paramEntry 245 }

out1FreezeMode OBJECT-TYPE
    SYNTAX TypeOut1FreezeMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify freeze mode if input is missing."
    ::= { paramEntry 246 }

out2FreezeMode OBJECT-TYPE
    SYNTAX TypeOut1FreezeMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: specify freeze mode if input is missing."
    ::= { paramEntry 247 }

out1TotalProcTime OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show the total delay comprising the processing time and the user delay <br>on the used path from SDI Input to SDI Output 1"
    ::= { paramEntry 248 }

out2TotalProcTime OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show the total delay comprising the processing time and the user delay <br>on the used path from SDI Input to SDI Output 2"
    ::= { paramEntry 249 }

conv3LockImgConvSettings OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Prevent from automatic reconfiguration of image converter settings in HiQ Scaler.
Otherwise (OFF) the converter will automatically re-configure the settings for output video format and scaling windows on a change of the detected signal frequency.
Enabling this option disables the manual selection of output format and image cropping and positioning. The default setting is OFF."
    ::= { paramEntry 250 }

presetsNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "maximum number of user presets"
    ::= { paramEntry 251 }

presetsActive OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Active Preset.<br>NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka <i>Current</i>) and make the required modifications there."
    ::= { paramEntry 252 }

presetsSaveAs OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
    ::= { paramEntry 253 }

presetsLoadToCurrent OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "loads selected user preset into the current user settings, all actual user changes will be lost"
    ::= { paramEntry 254 }

presetsName0 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 0"
    ::= { paramEntry 255 }

presetsName1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 1"
    ::= { paramEntry 256 }

presetsName2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 2"
    ::= { paramEntry 257 }

presetsName3 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 3"
    ::= { paramEntry 258 }

presetsName4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 4"
    ::= { paramEntry 259 }

presetsName5 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 5"
    ::= { paramEntry 260 }

presetsName6 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 6"
    ::= { paramEntry 261 }

presetsName7 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 7"
    ::= { paramEntry 262 }

out1FrameSyncCompensation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Frame Sync Compensation"
    ::= { paramEntry 265 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 267 }

eventSDIInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 1 No Input"
    ::= { paramEntry 268 }

eventFanFailureSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Fan Failure"
    ::= { paramEntry 269 }

eventHighTemperatureSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: High Temperature"
    ::= { paramEntry 270 }

conv3InputStatus OBJECT-TYPE
    SYNTAX TypeInputStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Display signal format of input - Converter 3"
    ::= { paramEntry 271 }

conv3InSize OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Conv 3 Input Image Size (pixels)"
    ::= { paramEntry 272 }

conv3OutSize OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Conv 3 Output Image Size (pixels)"
    ::= { paramEntry 273 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 274 }

out3ModifyPsF OBJECT-TYPE
    SYNTAX TypeOut1ModifyPsF
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.<br>This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
    ::= { paramEntry 275 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PAR5610 parameters"
    ::= { sw426 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PAR5610 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventSDIInput1NoInput OnOffValue,
    eventFanFailure OnOffValue,
    eventHighTemperature OnOffValue,
    channel2CoupleTo1 OnOffValue,
    freq TypeFreq,
    gPIFunc TypeGPIFunc,
    inputStatusSDI1 TypeInputStatusSDI1,
    conv3ControlMode TypeConv3ControlMode,
    conv3AspectInSelect TypeConv3AspectInSelect,
    conv3AspectIn TypeConv3AspectInSelect,
    conv3FormatOut TypeConv3FormatOut,
    conv3StatusOut TypeConv3StatusOut,
    conv3Mode TypeConv3Mode,
    conv3AdvancedSettings OnOffValue,
    conv3OutInsertAFD OnOffValue,
    conv3OutInsertVI OnOffValue,
    conv3OutInsertWSS OnOffValue,
    conv3StatusIn TypeConv3StatusOut,
    conv3CropHpos Integer32,
    conv3CropVpos Integer32,
    conv3CropHsize Integer32,
    conv3CropVsize Integer32,
    conv3InsertHpos Integer32,
    conv3InsertVpos Integer32,
    conv3InsertHsize Integer32,
    conv3InsertVsize Integer32,
    conv3MotionAdaptive OnOffValue,
    conv3MetaAdvancedSettings OnOffValue,
    conv3MetaCCSourceDefaultPriorities OnOffValue,
    conv3MetaTCSourceDefaultPriorities OnOffValue,
    conv3MetaAFDInStatus TypeConv3MetaAFDInStatus,
    conv3MetaVIInStatus TypeConv3MetaAFDInStatus,
    conv3MetaWSSInStatus TypeConv3MetaAFDInStatus,
    conv3MetaCCCDPOutStatus TypeConv3MetaCCCDPOutStatus,
    conv3MetaCCCDPInStatus TypeConv3MetaAFDInStatus,
    conv3MetaCCCDPInsertion OnOffValue,
    conv3MetaCCCDPSourcePrio1 TypeConv3MetaCCCDPSourcePrio1,
    conv3MetaCCCDPSourcePrio2 TypeConv3MetaCCCDPSourcePrio2,
    conv3MetaCCCDPSourcePrio3 TypeConv3MetaCCCDPSourcePrio2,
    conv3MetaCCRAWOutStatus TypeConv3MetaCCCDPOutStatus,
    conv3MetaCCRAWInStatus TypeConv3MetaAFDInStatus,
    conv3MetaCCRAWInsertion OnOffValue,
    conv3MetaCCRAWSourcePrio1 TypeConv3MetaCCCDPSourcePrio1,
    conv3MetaCCRAWSourcePrio2 TypeConv3MetaCCCDPSourcePrio2,
    conv3MetaCCRAWSourcePrio3 TypeConv3MetaCCCDPSourcePrio2,
    conv3MetaCCL21OutStatus TypeConv3MetaCCCDPOutStatus,
    conv3MetaCCL21InStatus TypeConv3MetaAFDInStatus,
    conv3MetaCCL21Insertion OnOffValue,
    conv3MetaCCL21SourcePrio1 TypeConv3MetaCCCDPSourcePrio1,
    conv3MetaCCL21SourcePrio2 TypeConv3MetaCCCDPSourcePrio2,
    conv3MetaCCL21SourcePrio3 TypeConv3MetaCCCDPSourcePrio2,
    conv3MetaTCLTCInStatus TypeConv3MetaAFDInStatus,
    conv3MetaTCLTCInsertion OnOffValue,
    conv3MetaTCLTCSourcePrio1 TypeConv3MetaTCLTCSourcePrio1,
    conv3MetaTCLTCSourcePrio2 TypeConv3MetaTCLTCSourcePrio2,
    conv3MetaTCLTCSourcePrio3 TypeConv3MetaTCLTCSourcePrio2,
    conv3MetaTCVITCInStatus TypeConv3MetaAFDInStatus,
    conv3MetaTCVITCInsertion OnOffValue,
    conv3MetaTCVITCSourcePrio1 TypeConv3MetaTCLTCSourcePrio1,
    conv3MetaTCVITCSourcePrio2 TypeConv3MetaTCLTCSourcePrio2,
    conv3MetaTCVITCSourcePrio3 TypeConv3MetaTCLTCSourcePrio2,
    conv3MetaTCDVITCInStatus TypeConv3MetaTCDVITCInStatus,
    conv3MetaTCDVITCInsertion OnOffValue,
    conv3MetaTCDVITCSourcePrio1 TypeConv3MetaTCLTCSourcePrio1,
    conv3MetaTCDVITCSourcePrio2 TypeConv3MetaTCLTCSourcePrio2,
    conv3MetaTCDVITCSourcePrio3 TypeConv3MetaTCLTCSourcePrio2,
    conv3MetaTCLTCOutStatus TypeConv3MetaCCCDPOutStatus,
    conv3MetaTCVITCOutStatus TypeConv3MetaCCCDPOutStatus,
    conv3MetaTCDVITCAOutStatus TypeConv3MetaCCCDPOutStatus,
    conv3MetaTCDVITCBOutStatus TypeConv3MetaCCCDPOutStatus,
    conv3MetaTCDVITCADestination625 TypeConv3MetaTCDVITCADestination625,
    conv3MetaTCDVITCBDestination625 TypeConv3MetaTCDVITCADestination625,
    conv3MetaTCDVITCADestination525 TypeConv3MetaTCDVITCADestination625,
    conv3MetaTCDVITCBDestination525 TypeConv3MetaTCDVITCADestination625,
    conv3MetaTCDVITCADetectedSrcLine Integer32,
    conv3MetaTCDVITCBDetectedSrcLine Integer32,
    conv3MetaTCVITCDetectedDVITCLine Integer32,
    conv3MetaTCDVITCAutomatic OnOffValue,
    conv3MetaTXTWSTInStatus TypeConv3MetaAFDInStatus,
    conv3MetaTXTS2031InStatus TypeConv3MetaAFDInStatus,
    conv3MetaTXTOP47InStatus TypeConv3MetaAFDInStatus,
    conv3MetaTXTEncoderMode TypeConv3MetaTXTEncoderMode,
    conv3MetaTXTLinesSelectionMode TypeConv3MetaTXTLinesSelectionMode,
    conv3MetaField1Overflow TypeConv3MetaField1Overflow,
    conv3MetaField2Overflow TypeConv3MetaField1Overflow,
    conv3MetaSMPTE2020Status TypeConv3MetaSMPTE2020Status,
    conv3MetaSMPTE2020Insertion OnOffValue,
    conv3ModeAutoARto169 TypeConv3ModeAutoARto169,
    conv3ModeAutoARto43 TypeConv3ModeAutoARto169,
    conv3InsertAFDFullFrame169 TypeConv3InsertAFDFullFrame169,
    conv3ModeAutoFallback TypeConv3ModeAutoFallback,
    sDIIn1TXTWSTInStatus TypeConv3MetaAFDInStatus,
    sDIIn1TXTS2031InStatus TypeConv3MetaAFDInStatus,
    sDIIn1TXTOP47InStatus TypeConv3MetaAFDInStatus,
    sDIIn1TXTDecoderMode TypeSDIIn1TXTDecoderMode,
    sDIIn1TCDVITCASource625 TypeSDIIn1TCDVITCASource625,
    sDIIn1TCDVITCBSource625 TypeSDIIn1TCDVITCASource625,
    sDIIn1TCDVITCASource525 TypeSDIIn1TCDVITCASource625,
    sDIIn1TCDVITCBSource525 TypeSDIIn1TCDVITCASource625,
    sDIIn1CCCDPStatus TypeConv3MetaAFDInStatus,
    sDIIn1CCRAWStatus TypeConv3MetaAFDInStatus,
    sDIIn1CCL21Status TypeConv3MetaAFDInStatus,
    sDIIn1TCLTCStatus TypeConv3MetaAFDInStatus,
    sDIIn1TCVITCStatus TypeConv3MetaAFDInStatus,
    sDIIn1TCDVITCStatus TypeConv3MetaTCDVITCInStatus,
    out1Assign TypeOut1Assign,
    out1Standard TypeConv3StatusOut,
    out2Assign TypeOut1Assign,
    out2Standard TypeConv3StatusOut,
    out1DelayFrames Integer32,
    out1DelayLines Integer32,
    out1DelayPixel Integer32,
    out1DelayMs FixedPointValue3,
    out1ApertureEnable OnOffValue,
    out1ApertureLevel Integer32,
    out1HBlank OnOffValue,
    out1VBlank OnOffValue,
    out1Gain Integer32,
    out1Saturation Integer32,
    out1BlackLevel FixedPointValue1,
    out1Hue FixedPointValue1,
    out1TestPatternSelect TypeOut1TestPatternSelect,
    out1TestPatternStd TypeOut1TestPatternStd,
    out1TestPatternOn OnOffValue,
    out1IfNoInput TypeOut1IfNoInput,
    out1ModifyPsF TypeOut1ModifyPsF,
    out2DelayFrames Integer32,
    out2DelayLines Integer32,
    out2DelayPixel Integer32,
    out2DelayMs FixedPointValue3,
    out2ApertureEnable OnOffValue,
    out2ApertureLevel Integer32,
    out2HBlank OnOffValue,
    out2VBlank OnOffValue,
    out2Gain Integer32,
    out2Saturation Integer32,
    out2BlackLevel FixedPointValue1,
    out2Hue FixedPointValue1,
    out2TestPatternSelect TypeOut1TestPatternSelect,
    out2TestPatternStd TypeOut1TestPatternStd,
    out2TestPatternOn OnOffValue,
    out2IfNoInput TypeOut1IfNoInput,
    out2ModifyPsF TypeOut1ModifyPsF,
    temperatureMAX1617Int Integer32,
    temperatureMAX1617Ext Integer32,
    delayPulseAssign TypeDelayPulseAssign,
    presetsGPIOn TypePresetsGPIOn,
    presetsGPIOff TypePresetsGPIOn,
    genLockStatus TypeGenLockStatus,
    inputToRefDelay1H Integer32,
    inputToRefDelay1V Integer32,
    inputToRefDelay2H Integer32,
    inputToRefDelay2V Integer32,
    audioContentSDI11 TypeAudioContentSDI11,
    audioContentSDI12 TypeAudioContentSDI11,
    audioContentSDI13 TypeAudioContentSDI11,
    audioContentSDI14 TypeAudioContentSDI11,
    audioContentSDI15 TypeAudioContentSDI11,
    audioContentSDI16 TypeAudioContentSDI11,
    audioContentSDI17 TypeAudioContentSDI11,
    audioContentSDI18 TypeAudioContentSDI11,
    audioContentStatusSDI11 TypeAudioContentStatusSDI11,
    audioContentStatusSDI12 TypeAudioContentStatusSDI11,
    audioContentStatusSDI13 TypeAudioContentStatusSDI11,
    audioContentStatusSDI14 TypeAudioContentStatusSDI11,
    audioContentStatusSDI15 TypeAudioContentStatusSDI11,
    audioContentStatusSDI16 TypeAudioContentStatusSDI11,
    audioContentStatusSDI17 TypeAudioContentStatusSDI11,
    audioContentStatusSDI18 TypeAudioContentStatusSDI11,
    out1MetaLineSelectionMode TypeConv3MetaTXTLinesSelectionMode,
    out1MetaS352Insertion TypeOut1MetaS352Insertion,
    out1MetaAFDLine TypeOut1MetaAFDLine,
    out1MetaCCCDPLine TypeOut1MetaAFDLine,
    out1MetaCCRAWLine TypeOut1MetaAFDLine,
    out1MetaS2020Line TypeOut1MetaAFDLine,
    out1MetaS2031WSTLine TypeOut1MetaAFDLine,
    out1MetaOP47WSTLine TypeOut1MetaAFDLine,
    out1MetaATCLTCLine TypeOut1MetaAFDLine,
    out1MetaATCVITCLine TypeOut1MetaAFDLine,
    out1MetaATCLTCLocation TypeOut1MetaATCLTCLocation,
    out1MetaATCVITCLocation TypeOut1MetaATCLTCLocation,
    out1MetaOP47FieldInversion TypeOut1MetaS352Insertion,
    out2MetaLineSelectionMode TypeConv3MetaTXTLinesSelectionMode,
    out2MetaS352Insertion TypeOut1MetaS352Insertion,
    out2MetaAFDLine TypeOut1MetaAFDLine,
    out2MetaCCCDPLine TypeOut1MetaAFDLine,
    out2MetaCCRAWLine TypeOut1MetaAFDLine,
    out2MetaS2020Line TypeOut1MetaAFDLine,
    out2MetaS2031WSTLine TypeOut1MetaAFDLine,
    out2MetaOP47WSTLine TypeOut1MetaAFDLine,
    out2MetaATCLTCLine TypeOut1MetaAFDLine,
    out2MetaATCVITCLine TypeOut1MetaAFDLine,
    out2MetaATCLTCLocation TypeOut1MetaATCLTCLocation,
    out2MetaATCVITCLocation TypeOut1MetaATCLTCLocation,
    out2MetaOP47FieldInversion TypeOut1MetaS352Insertion,
    sDIIn1StatusAFD TypeSDIIn1StatusAFD,
    sDIIn1StatusWSS TypeSDIIn1StatusWSS,
    sDIIn1StatusVI TypeSDIIn1StatusVI,
    sDIIn1AFDLine TypeSDIIn1AFDLine,
    sDIIn1CCCDPLine TypeSDIIn1AFDLine,
    sDIIn1CCRAWLine TypeSDIIn1AFDLine,
    sDIIn1S2020Line TypeSDIIn1AFDLine,
    sDIIn1S2031WSTFirstLine TypeSDIIn1AFDLine,
    sDIIn1S2031WSTLastLine TypeSDIIn1AFDLine,
    sDIIn1OP47WSTFirstLine TypeSDIIn1AFDLine,
    sDIIn1OP47WSTLastLine TypeSDIIn1AFDLine,
    sDIIn1ATCLTCLine TypeSDIIn1AFDLine,
    sDIIn1ATCVITCLine TypeSDIIn1AFDLine,
    sDIIn1ATCLTCLocation TypeOut1MetaATCLTCLocation,
    sDIIn1ATCVITCLocation TypeOut1MetaATCLTCLocation,
    sDIIn1OP47FieldInversion TypeOut1MetaS352Insertion,
    sDIIn1StatusFormatReactOnChange TypeSDIIn1StatusFormatReactOnChange,
    sDIIn1StatusFormatReactOnLoss TypeSDIIn1StatusFormatReactOnChange,
    snapToReferenceFrameLength OnOffValue,
    out1ClipHeadroom OnOffValue,
    out2ClipHeadroom OnOffValue,
    out1FixedProcTime OnOffValue,
    out2FixedProcTime OnOffValue,
    out1DelayMode TypeOut1DelayMode,
    out2DelayMode TypeOut1DelayMode,
    out1FreezeMode TypeOut1FreezeMode,
    out2FreezeMode TypeOut1FreezeMode,
    out1TotalProcTime FixedPointValue3,
    out2TotalProcTime FixedPointValue3,
    conv3LockImgConvSettings OnOffValue,
    presetsNumber Integer32,
    presetsActive TypePresetsGPIOn,
    presetsSaveAs TypePresetsSaveAs,
    presetsLoadToCurrent TypePresetsSaveAs,
    presetsName0 DisplayString,
    presetsName1 DisplayString,
    presetsName2 DisplayString,
    presetsName3 DisplayString,
    presetsName4 DisplayString,
    presetsName5 DisplayString,
    presetsName6 DisplayString,
    presetsName7 DisplayString,
    out1FrameSyncCompensation Integer32,
    boardID Integer32,
    eventSDIInput1NoInputSNMP TypeEventSDIInput1NoInputSNMP,
    eventFanFailureSNMP TypeEventSDIInput1NoInputSNMP,
    eventHighTemperatureSNMP TypeEventSDIInput1NoInputSNMP,
    conv3InputStatus TypeInputStatusSDI1,
    conv3InSize DisplayString,
    conv3OutSize DisplayString,
    sNumber DisplayString,
    out3ModifyPsF TypeOut1ModifyPsF }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PAR5610"
    ::= { sw426 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventSDIInput1NoInput,
        eventFanFailure,
        eventHighTemperature,
        channel2CoupleTo1,
        freq,
        gPIFunc,
        inputStatusSDI1,
        conv3ControlMode,
        conv3AspectInSelect,
        conv3AspectIn,
        conv3FormatOut,
        conv3StatusOut,
        conv3Mode,
        conv3AdvancedSettings,
        conv3OutInsertAFD,
        conv3OutInsertVI,
        conv3OutInsertWSS,
        conv3StatusIn,
        conv3CropHpos,
        conv3CropVpos,
        conv3CropHsize,
        conv3CropVsize,
        conv3InsertHpos,
        conv3InsertVpos,
        conv3InsertHsize,
        conv3InsertVsize,
        conv3MotionAdaptive,
        conv3MetaAdvancedSettings,
        conv3MetaCCSourceDefaultPriorities,
        conv3MetaTCSourceDefaultPriorities,
        conv3MetaAFDInStatus,
        conv3MetaVIInStatus,
        conv3MetaWSSInStatus,
        conv3MetaCCCDPOutStatus,
        conv3MetaCCCDPInStatus,
        conv3MetaCCCDPInsertion,
        conv3MetaCCCDPSourcePrio1,
        conv3MetaCCCDPSourcePrio2,
        conv3MetaCCCDPSourcePrio3,
        conv3MetaCCRAWOutStatus,
        conv3MetaCCRAWInStatus,
        conv3MetaCCRAWInsertion,
        conv3MetaCCRAWSourcePrio1,
        conv3MetaCCRAWSourcePrio2,
        conv3MetaCCRAWSourcePrio3,
        conv3MetaCCL21OutStatus,
        conv3MetaCCL21InStatus,
        conv3MetaCCL21Insertion,
        conv3MetaCCL21SourcePrio1,
        conv3MetaCCL21SourcePrio2,
        conv3MetaCCL21SourcePrio3,
        conv3MetaTCLTCInStatus,
        conv3MetaTCLTCInsertion,
        conv3MetaTCLTCSourcePrio1,
        conv3MetaTCLTCSourcePrio2,
        conv3MetaTCLTCSourcePrio3,
        conv3MetaTCVITCInStatus,
        conv3MetaTCVITCInsertion,
        conv3MetaTCVITCSourcePrio1,
        conv3MetaTCVITCSourcePrio2,
        conv3MetaTCVITCSourcePrio3,
        conv3MetaTCDVITCInStatus,
        conv3MetaTCDVITCInsertion,
        conv3MetaTCDVITCSourcePrio1,
        conv3MetaTCDVITCSourcePrio2,
        conv3MetaTCDVITCSourcePrio3,
        conv3MetaTCLTCOutStatus,
        conv3MetaTCVITCOutStatus,
        conv3MetaTCDVITCAOutStatus,
        conv3MetaTCDVITCBOutStatus,
        conv3MetaTCDVITCADestination625,
        conv3MetaTCDVITCBDestination625,
        conv3MetaTCDVITCADestination525,
        conv3MetaTCDVITCBDestination525,
        conv3MetaTCDVITCADetectedSrcLine,
        conv3MetaTCDVITCBDetectedSrcLine,
        conv3MetaTCVITCDetectedDVITCLine,
        conv3MetaTCDVITCAutomatic,
        conv3MetaTXTWSTInStatus,
        conv3MetaTXTS2031InStatus,
        conv3MetaTXTOP47InStatus,
        conv3MetaTXTEncoderMode,
        conv3MetaTXTLinesSelectionMode,
        conv3MetaField1Overflow,
        conv3MetaField2Overflow,
        conv3MetaSMPTE2020Status,
        conv3MetaSMPTE2020Insertion,
        conv3ModeAutoARto169,
        conv3ModeAutoARto43,
        conv3InsertAFDFullFrame169,
        conv3ModeAutoFallback,
        sDIIn1TXTWSTInStatus,
        sDIIn1TXTS2031InStatus,
        sDIIn1TXTOP47InStatus,
        sDIIn1TXTDecoderMode,
        sDIIn1TCDVITCASource625,
        sDIIn1TCDVITCBSource625,
        sDIIn1TCDVITCASource525,
        sDIIn1TCDVITCBSource525,
        sDIIn1CCCDPStatus,
        sDIIn1CCRAWStatus,
        sDIIn1CCL21Status,
        sDIIn1TCLTCStatus,
        sDIIn1TCVITCStatus,
        sDIIn1TCDVITCStatus,
        out1Assign,
        out1Standard,
        out2Assign,
        out2Standard,
        out1DelayFrames,
        out1DelayLines,
        out1DelayPixel,
        out1DelayMs,
        out1ApertureEnable,
        out1ApertureLevel,
        out1HBlank,
        out1VBlank,
        out1Gain,
        out1Saturation,
        out1BlackLevel,
        out1Hue,
        out1TestPatternSelect,
        out1TestPatternStd,
        out1TestPatternOn,
        out1IfNoInput,
        out1ModifyPsF,
        out2DelayFrames,
        out2DelayLines,
        out2DelayPixel,
        out2DelayMs,
        out2ApertureEnable,
        out2ApertureLevel,
        out2HBlank,
        out2VBlank,
        out2Gain,
        out2Saturation,
        out2BlackLevel,
        out2Hue,
        out2TestPatternSelect,
        out2TestPatternStd,
        out2TestPatternOn,
        out2IfNoInput,
        out2ModifyPsF,
        temperatureMAX1617Int,
        temperatureMAX1617Ext,
        delayPulseAssign,
        presetsGPIOn,
        presetsGPIOff,
        genLockStatus,
        inputToRefDelay1H,
        inputToRefDelay1V,
        inputToRefDelay2H,
        inputToRefDelay2V,
        audioContentSDI11,
        audioContentSDI12,
        audioContentSDI13,
        audioContentSDI14,
        audioContentSDI15,
        audioContentSDI16,
        audioContentSDI17,
        audioContentSDI18,
        audioContentStatusSDI11,
        audioContentStatusSDI12,
        audioContentStatusSDI13,
        audioContentStatusSDI14,
        audioContentStatusSDI15,
        audioContentStatusSDI16,
        audioContentStatusSDI17,
        audioContentStatusSDI18,
        out1MetaLineSelectionMode,
        out1MetaS352Insertion,
        out1MetaAFDLine,
        out1MetaCCCDPLine,
        out1MetaCCRAWLine,
        out1MetaS2020Line,
        out1MetaS2031WSTLine,
        out1MetaOP47WSTLine,
        out1MetaATCLTCLine,
        out1MetaATCVITCLine,
        out1MetaATCLTCLocation,
        out1MetaATCVITCLocation,
        out1MetaOP47FieldInversion,
        out2MetaLineSelectionMode,
        out2MetaS352Insertion,
        out2MetaAFDLine,
        out2MetaCCCDPLine,
        out2MetaCCRAWLine,
        out2MetaS2020Line,
        out2MetaS2031WSTLine,
        out2MetaOP47WSTLine,
        out2MetaATCLTCLine,
        out2MetaATCVITCLine,
        out2MetaATCLTCLocation,
        out2MetaATCVITCLocation,
        out2MetaOP47FieldInversion,
        sDIIn1StatusAFD,
        sDIIn1StatusWSS,
        sDIIn1StatusVI,
        sDIIn1AFDLine,
        sDIIn1CCCDPLine,
        sDIIn1CCRAWLine,
        sDIIn1S2020Line,
        sDIIn1S2031WSTFirstLine,
        sDIIn1S2031WSTLastLine,
        sDIIn1OP47WSTFirstLine,
        sDIIn1OP47WSTLastLine,
        sDIIn1ATCLTCLine,
        sDIIn1ATCVITCLine,
        sDIIn1ATCLTCLocation,
        sDIIn1ATCVITCLocation,
        sDIIn1OP47FieldInversion,
        sDIIn1StatusFormatReactOnChange,
        sDIIn1StatusFormatReactOnLoss,
        snapToReferenceFrameLength,
        out1ClipHeadroom,
        out2ClipHeadroom,
        out1FixedProcTime,
        out2FixedProcTime,
        out1DelayMode,
        out2DelayMode,
        out1FreezeMode,
        out2FreezeMode,
        out1TotalProcTime,
        out2TotalProcTime,
        conv3LockImgConvSettings,
        presetsNumber,
        presetsActive,
        presetsSaveAs,
        presetsLoadToCurrent,
        presetsName0,
        presetsName1,
        presetsName2,
        presetsName3,
        presetsName4,
        presetsName5,
        presetsName6,
        presetsName7,
        out1FrameSyncCompensation,
        boardID,
        eventSDIInput1NoInputSNMP,
        eventFanFailureSNMP,
        eventHighTemperatureSNMP,
        conv3InputStatus,
        conv3InSize,
        conv3OutSize,
        sNumber,
        out3ModifyPsF }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END