-- Machine generated MIB file, do not edit!
--
-- MIB file for PDL5600, type code 07.CC, software label 282
-- Generated on Tuesday, 09-Aug-16 11:26:01 UTC
-- CVS $Id: PDL5600_07cc_sw282.mib,v 1.16 2016/08/09 11:26:03 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PDL5600-07cc-sw282-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pdl5600-07cc-sw282 MODULE-IDENTITY
    LAST-UPDATED "201608091126Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PDL5600, type code 07.CC, software label 282"
    REVISION "201608091126Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 1996282 }

pdl5600-07cc OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PDL5600"
    ::= { products 1996 }

sw282 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 282"
    ::= { pdl5600-07cc 282 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeFreq ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n60Hz(0),
        n5994Hz(1),
        n50Hz(2)
    }

TypeGPIFunc ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        switchVideoInputs(1),
        switchUserPresets(2)
    }

TypeInputStatusSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27)
    }

TypeOut1Assign ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input1(0),
        input2(1)
    }

TypeOut1Standard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        invalid(0),
        n525(1),
        n625(2),
        n720p60(3),
        n720p5994(4),
        n720p50(5),
        n720p30(6),
        n720p2997(7),
        n720p25(8),
        n720p24(9),
        n720p2398(10),
        n1080i60(11),
        n1080i5994(12),
        n1080i50(13),
        n1080p60(14),
        n1080p5994(15),
        n1080p50(16),
        n1080p30(17),
        n1080p2997(18),
        n1080p25(19),
        n1080p24(20),
        n1080p2398(21),
        n1080psF30(22),
        n1080psF2997(23),
        n1080psF25(24),
        n1080psF24(25),
        n1080psF2398(26)
    }

TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        black(0),
        red(1),
        green(2),
        blue(3),
        cyan(4),
        magenta(5),
        yellow(6),
        white(7),
        n15Grey(8),
        eQPath(9),
        pLLPath(10),
        eQPLLPath(11),
        n75Colorbar(12),
        colorbarOverRed(13)
    }

TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        followLastInput(0)
    }

TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        black(0),
        testPattern(1)
    }

TypePresetsGPIOn ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        current(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypeGenLockStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unlocked(0),
        locked(1)
    }

TypePresetsSaveAs ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypeEventSDIInput1NoInputSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventSDIInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 1 No Input"
    ::= { paramEntry 14 }

eventSDIInput2NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 2 No Input"
    ::= { paramEntry 15 }

eventFanFailure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Fan Failure"
    ::= { paramEntry 16 }

eventHighTemperature OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: High Temperature"
    ::= { paramEntry 17 }

channel2CoupleTo1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI-Output Channel 2: couple all selections to channel 1"
    ::= { paramEntry 19 }

freq OBJECT-TYPE
    SYNTAX TypeFreq
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
    ::= { paramEntry 20 }

gPIFunc OBJECT-TYPE
    SYNTAX TypeGPIFunc
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify influence of GPI input"
    ::= { paramEntry 21 }

inputStatusSDI1 OBJECT-TYPE
    SYNTAX TypeInputStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of SDI input channel 1"
    ::= { paramEntry 22 }

inputStatusSDI2 OBJECT-TYPE
    SYNTAX TypeInputStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of SDI input channel 2"
    ::= { paramEntry 23 }

out1Assign OBJECT-TYPE
    SYNTAX TypeOut1Assign
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assign SDI Out 1 to Input (direct)"
    ::= { paramEntry 24 }

out1Standard OBJECT-TYPE
    SYNTAX TypeOut1Standard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI Out 1"
    ::= { paramEntry 25 }

out2Assign OBJECT-TYPE
    SYNTAX TypeOut1Assign
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assign SDI Out 2 to Input (direct)"
    ::= { paramEntry 26 }

out2Standard OBJECT-TYPE
    SYNTAX TypeOut1Standard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI Out 2"
    ::= { paramEntry 27 }

out1DelayFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in frames. Combine with Out1/DelayLines and Out1/DelayPixel for total delay"
    ::= { paramEntry 28 }

out1DelayLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in lines. Combine with Out1/DelayFrames and Out1/DelayPixel for total delay"
    ::= { paramEntry 29 }

out1DelayPixel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in pixel. Combine with Out1/DelayFrames and Out1/DelayLines for total delay"
    ::= { paramEntry 30 }

out1DelayMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 user delay in milliseconds."
    ::= { paramEntry 31 }

out1ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable aperture correction"
    ::= { paramEntry 32 }

out1ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: aperture correction level"
    ::= { paramEntry 33 }

out1HBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable H-Blanking"
    ::= { paramEntry 34 }

out1VBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable V-Blanking"
    ::= { paramEntry 35 }

out1Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust Video Gain"
    ::= { paramEntry 36 }

out1Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Saturation"
    ::= { paramEntry 37 }

out1BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
    ::= { paramEntry 38 }

out1Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Hue"
    ::= { paramEntry 39 }

out1TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 40 }

out1TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 41 }

out1TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable preselected test pattern"
    ::= { paramEntry 42 }

out1IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 43 }

out2DelayFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in frames. Combine with Out2/DelayLines and Out2/DelayPixel for total delay"
    ::= { paramEntry 44 }

out2DelayLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in lines. Combine with Out2/DelayFrames and Out2/DelayPixel for total delay"
    ::= { paramEntry 45 }

out2DelayPixel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in pixel. Combine with Out2/DelayFrames and Out2/DelayLines for total delay"
    ::= { paramEntry 46 }

out2DelayMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 user delay in milliseconds."
    ::= { paramEntry 47 }

out2ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable aperture correction"
    ::= { paramEntry 48 }

out2ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: aperture correction level"
    ::= { paramEntry 49 }

out2HBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable H-Blanking"
    ::= { paramEntry 50 }

out2VBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable V-Blanking"
    ::= { paramEntry 51 }

out2Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust Video Gain"
    ::= { paramEntry 52 }

out2Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video Saturation"
    ::= { paramEntry 53 }

out2BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video black level (in IRE)"
    ::= { paramEntry 54 }

out2Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video Hue"
    ::= { paramEntry 55 }

out2TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 56 }

out2TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out2/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 57 }

out2TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable preselected test pattern"
    ::= { paramEntry 58 }

out2IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 59 }

temperatureMAX1617Int OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PCB temperature (MAX1617) in C"
    ::= { paramEntry 62 }

temperatureMAX1617Ext OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "FPGA temperature in C"
    ::= { paramEntry 63 }

presetsGPIOn OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 64 }

presetsGPIOff OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 65 }

genLockStatus OBJECT-TYPE
    SYNTAX TypeGenLockStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Lock-Status of LMH1982"
    ::= { paramEntry 66 }

inputToRefDelay1H OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Horizontal delay between Input 1 and Reference"
    ::= { paramEntry 67 }

inputToRefDelay1V OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Vertical delay between Input 1 and Reference"
    ::= { paramEntry 68 }

inputToRefDelay2H OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Horizontal delay between Input 2 and Reference"
    ::= { paramEntry 69 }

inputToRefDelay2V OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Vertical delay between Input 2 and Reference"
    ::= { paramEntry 70 }

presetsNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "maximum number of user presets"
    ::= { paramEntry 71 }

presetsActive OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Active Preset.<br>NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka <i>Current</i>) and make the required modifications there."
    ::= { paramEntry 72 }

presetsSaveAs OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
    ::= { paramEntry 73 }

presetsLoadToCurrent OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "loads selected user preset into the current user settings, all actual user changes will be lost"
    ::= { paramEntry 74 }

presetsName0 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 0"
    ::= { paramEntry 75 }

presetsName1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 1"
    ::= { paramEntry 76 }

presetsName2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 2"
    ::= { paramEntry 77 }

presetsName3 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 3"
    ::= { paramEntry 78 }

presetsName4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 4"
    ::= { paramEntry 79 }

presetsName5 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 5"
    ::= { paramEntry 80 }

presetsName6 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 6"
    ::= { paramEntry 81 }

presetsName7 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 7"
    ::= { paramEntry 82 }

out1FrameSyncCompensation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Frame Sync Compensation"
    ::= { paramEntry 83 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 84 }

eventSDIInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 1 No Input"
    ::= { paramEntry 86 }

eventSDIInput2NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 2 No Input"
    ::= { paramEntry 87 }

eventFanFailureSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Fan Failure"
    ::= { paramEntry 88 }

eventHighTemperatureSNMP OBJECT-TYPE
    SYNTAX TypeEventSDIInput1NoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: High Temperature"
    ::= { paramEntry 89 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 90 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PDL5600 parameters"
    ::= { sw282 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PDL5600 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventSDIInput1NoInput OnOffValue,
    eventSDIInput2NoInput OnOffValue,
    eventFanFailure OnOffValue,
    eventHighTemperature OnOffValue,
    channel2CoupleTo1 OnOffValue,
    freq TypeFreq,
    gPIFunc TypeGPIFunc,
    inputStatusSDI1 TypeInputStatusSDI1,
    inputStatusSDI2 TypeInputStatusSDI1,
    out1Assign TypeOut1Assign,
    out1Standard TypeOut1Standard,
    out2Assign TypeOut1Assign,
    out2Standard TypeOut1Standard,
    out1DelayFrames Integer32,
    out1DelayLines Integer32,
    out1DelayPixel Integer32,
    out1DelayMs FixedPointValue3,
    out1ApertureEnable OnOffValue,
    out1ApertureLevel Integer32,
    out1HBlank OnOffValue,
    out1VBlank OnOffValue,
    out1Gain Integer32,
    out1Saturation Integer32,
    out1BlackLevel FixedPointValue1,
    out1Hue FixedPointValue1,
    out1TestPatternSelect TypeOut1TestPatternSelect,
    out1TestPatternStd TypeOut1TestPatternStd,
    out1TestPatternOn OnOffValue,
    out1IfNoInput TypeOut1IfNoInput,
    out2DelayFrames Integer32,
    out2DelayLines Integer32,
    out2DelayPixel Integer32,
    out2DelayMs FixedPointValue3,
    out2ApertureEnable OnOffValue,
    out2ApertureLevel Integer32,
    out2HBlank OnOffValue,
    out2VBlank OnOffValue,
    out2Gain Integer32,
    out2Saturation Integer32,
    out2BlackLevel FixedPointValue1,
    out2Hue FixedPointValue1,
    out2TestPatternSelect TypeOut1TestPatternSelect,
    out2TestPatternStd TypeOut1TestPatternStd,
    out2TestPatternOn OnOffValue,
    out2IfNoInput TypeOut1IfNoInput,
    temperatureMAX1617Int Integer32,
    temperatureMAX1617Ext Integer32,
    presetsGPIOn TypePresetsGPIOn,
    presetsGPIOff TypePresetsGPIOn,
    genLockStatus TypeGenLockStatus,
    inputToRefDelay1H Integer32,
    inputToRefDelay1V Integer32,
    inputToRefDelay2H Integer32,
    inputToRefDelay2V Integer32,
    presetsNumber Integer32,
    presetsActive TypePresetsGPIOn,
    presetsSaveAs TypePresetsSaveAs,
    presetsLoadToCurrent TypePresetsSaveAs,
    presetsName0 DisplayString,
    presetsName1 DisplayString,
    presetsName2 DisplayString,
    presetsName3 DisplayString,
    presetsName4 DisplayString,
    presetsName5 DisplayString,
    presetsName6 DisplayString,
    presetsName7 DisplayString,
    out1FrameSyncCompensation Integer32,
    boardID Integer32,
    eventSDIInput1NoInputSNMP TypeEventSDIInput1NoInputSNMP,
    eventSDIInput2NoInputSNMP TypeEventSDIInput1NoInputSNMP,
    eventFanFailureSNMP TypeEventSDIInput1NoInputSNMP,
    eventHighTemperatureSNMP TypeEventSDIInput1NoInputSNMP,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PDL5600"
    ::= { sw282 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventSDIInput1NoInput,
        eventSDIInput2NoInput,
        eventFanFailure,
        eventHighTemperature,
        channel2CoupleTo1,
        freq,
        gPIFunc,
        inputStatusSDI1,
        inputStatusSDI2,
        out1Assign,
        out1Standard,
        out2Assign,
        out2Standard,
        out1DelayFrames,
        out1DelayLines,
        out1DelayPixel,
        out1DelayMs,
        out1ApertureEnable,
        out1ApertureLevel,
        out1HBlank,
        out1VBlank,
        out1Gain,
        out1Saturation,
        out1BlackLevel,
        out1Hue,
        out1TestPatternSelect,
        out1TestPatternStd,
        out1TestPatternOn,
        out1IfNoInput,
        out2DelayFrames,
        out2DelayLines,
        out2DelayPixel,
        out2DelayMs,
        out2ApertureEnable,
        out2ApertureLevel,
        out2HBlank,
        out2VBlank,
        out2Gain,
        out2Saturation,
        out2BlackLevel,
        out2Hue,
        out2TestPatternSelect,
        out2TestPatternStd,
        out2TestPatternOn,
        out2IfNoInput,
        temperatureMAX1617Int,
        temperatureMAX1617Ext,
        presetsGPIOn,
        presetsGPIOff,
        genLockStatus,
        inputToRefDelay1H,
        inputToRefDelay1V,
        inputToRefDelay2H,
        inputToRefDelay2V,
        presetsNumber,
        presetsActive,
        presetsSaveAs,
        presetsLoadToCurrent,
        presetsName0,
        presetsName1,
        presetsName2,
        presetsName3,
        presetsName4,
        presetsName5,
        presetsName6,
        presetsName7,
        out1FrameSyncCompensation,
        boardID,
        eventSDIInput1NoInputSNMP,
        eventSDIInput2NoInputSNMP,
        eventFanFailureSNMP,
        eventHighTemperatureSNMP,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END