-- Machine generated MIB file, do not edit!
--
-- MIB file for PDM5240-U, type code 12.D5, software label 743
-- Generated on Tuesday, 09-Aug-16 15:53:41 UTC
-- CVS $Id: PDM5240-U_12d5_sw743.mib,v 1.2 2016/08/09 15:53:42 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PDM5240-U-12d5-sw743-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pdm5240-u-12d5-sw743 MODULE-IDENTITY
    LAST-UPDATED "201608091553Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PDM5240-U, type code 12.D5, software label 743"
    REVISION "201608091553Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 4821743 }

pdm5240-u-12d5 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PDM5240-U"
    ::= { products 4821 }

sw743 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 743"
    ::= { pdm5240-u-12d5 743 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeOutStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27)
    }

TypeInAes1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        missing(1),
        async(2),
        present(3)
    }

TypeInGrp1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nASDIMissing(0),
        nASDIInvalid(1),
        none(2),
        inserted(3),
        present(4),
        removed(5),
        overwritten(6)
    }

TypeSampleRateConversion1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        bypass(1)
    }

TypeSourceEmbAESStereo112 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aESInt1(0),
        aESInt2(1),
        aESInt3(2),
        aESInt4(3),
        aESInt5(4),
        aESInt6(5),
        aESInt7(6),
        aESInt8(7),
        audExt1(8),
        audExt2(9),
        audExt3(10),
        audExt4(11),
        mute(12)
    }

TypeSourceEmbAES11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aESInt11(0),
        aESInt12(1),
        aESInt13(2),
        aESInt14(3),
        aESInt21(4),
        aESInt22(5),
        aESInt23(6),
        aESInt24(7),
        aESInt31(8),
        aESInt32(9),
        aESInt33(10),
        aESInt34(11),
        aESInt41(12),
        aESInt42(13),
        aESInt43(14),
        aESInt44(15),
        audExt11(16),
        audExt12(17),
        audExt21(18),
        audExt22(19),
        audExt31(20),
        audExt32(21),
        audExt41(22),
        audExt42(23),
        muteL(24),
        muteR(25)
    }

TypeTestToneFrequency ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n1000Hz(0),
        n1010Hz(1)
    }

TypeDeleteGroup1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        keep(0),
        del(1)
    }

TypeEmbedBits1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n20Bit(0),
        n24Bit(1)
    }

TypeEmbedded11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        present(0),
        notEmbedded(1)
    }

TypeSourceAESOut11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        intAES11(0),
        intAES12(1),
        intAES13(2),
        intAES14(3),
        intAES21(4),
        intAES22(5),
        intAES23(6),
        intAES24(7),
        intAES31(8),
        intAES32(9),
        intAES33(10),
        intAES34(11),
        intAES41(12),
        intAES42(13),
        intAES43(14),
        intAES44(15),
        extAES11(16),
        extAES12(17),
        extAES21(18),
        extAES22(19),
        extAES31(20),
        extAES32(21),
        extAES41(22),
        extAES42(23),
        muteL(24),
        muteR(25)
    }

TypeDeembPhaseSyncVerify ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeAudioContentSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeAudioContentStatusSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeAudioMute1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        norm(0),
        mute(1)
    }

TypeAudioInvert1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        norm(0),
        inv(1)
    }

TypeAudioSilence1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        silence(0),
        noSilence(1)
    }

TypeAudioOverload1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        ok(0),
        overload(1)
    }

TypeAESPortAssignment1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input(0),
        output(1)
    }

TypeBackpanelStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        missing(1),
        present(2)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeEventPrimaryPowermissingSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

TypeAESOutIfNoIn ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aESFrame(0),
        noAESIfNoSDI(1)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 8 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 9 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 10 }

outStandard OBJECT-TYPE
    SYNTAX TypeOutStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI output"
    ::= { paramEntry 12 }

inStandard OBJECT-TYPE
    SYNTAX TypeOutStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input status indication"
    ::= { paramEntry 13 }

inAes1 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 1 status"
    ::= { paramEntry 14 }

inAes2 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 2 status"
    ::= { paramEntry 15 }

inAes3 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 3 status"
    ::= { paramEntry 16 }

inAes4 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 4 status"
    ::= { paramEntry 17 }

inGrp1 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 18 }

inGrp2 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 19 }

inGrp3 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 20 }

inGrp4 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 21 }

embedGroup1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 1 into the video output"
    ::= { paramEntry 22 }

embedGroup2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 2 into the video output"
    ::= { paramEntry 23 }

embedGroup3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 3 into the video output"
    ::= { paramEntry 24 }

embedGroup4 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 4 into the video output"
    ::= { paramEntry 25 }

sampleRateConversion1 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 1"
    ::= { paramEntry 26 }

sampleRateConversion2 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 2"
    ::= { paramEntry 27 }

sampleRateConversion3 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 3"
    ::= { paramEntry 28 }

sampleRateConversion4 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 4"
    ::= { paramEntry 29 }

sourceEmbAESStereo112 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 1.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES1.1-2.1 and SourceEmbAES1.1-2.2"
    ::= { paramEntry 55 }

sourceEmbAES11 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.1"
    ::= { paramEntry 56 }

sourceEmbAES12 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.2"
    ::= { paramEntry 58 }

sourceEmbAESStereo134 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 1.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES1.3-4.1 and SourceEmbAES1.3-4.2"
    ::= { paramEntry 60 }

sourceEmbAES13 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.3"
    ::= { paramEntry 61 }

sourceEmbAES14 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.4"
    ::= { paramEntry 63 }

sourceEmbAESStereo212 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 2.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES2.1-2.1 and SourceEmbAES2.1-2.2"
    ::= { paramEntry 65 }

sourceEmbAES21 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.1"
    ::= { paramEntry 66 }

sourceEmbAES22 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.2"
    ::= { paramEntry 68 }

sourceEmbAESStereo234 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 2.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES2.3-4.1 and SourceEmbAES2.3-4.2"
    ::= { paramEntry 70 }

sourceEmbAES23 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.3"
    ::= { paramEntry 71 }

sourceEmbAES24 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.4"
    ::= { paramEntry 73 }

sourceEmbAESStereo312 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 3.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES3.1-2.1 and SourceEmbAES3.1-2.2"
    ::= { paramEntry 75 }

sourceEmbAES31 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.1"
    ::= { paramEntry 76 }

sourceEmbAES32 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.2"
    ::= { paramEntry 78 }

sourceEmbAESStereo334 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 3.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES3.3-4.1 and SourceEmbAES3.3-4.2"
    ::= { paramEntry 80 }

sourceEmbAES33 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.3"
    ::= { paramEntry 81 }

sourceEmbAES34 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.4"
    ::= { paramEntry 83 }

sourceEmbAESStereo412 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 4.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES4.1-2.1 and SourceEmbAES4.1-2.2"
    ::= { paramEntry 85 }

sourceEmbAES41 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.1"
    ::= { paramEntry 86 }

sourceEmbAES42 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.2"
    ::= { paramEntry 88 }

sourceEmbAESStereo434 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 4.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES4.3-4.1 and SourceEmbAES4.3-4.2"
    ::= { paramEntry 90 }

sourceEmbAES43 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.3"
    ::= { paramEntry 91 }

sourceEmbAES44 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.4"
    ::= { paramEntry 93 }

testToneFrequency OBJECT-TYPE
    SYNTAX TypeTestToneFrequency
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Frequency for the Test Tone"
    ::= { paramEntry 94 }

hBlanking OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable horizontal blanking"
    ::= { paramEntry 95 }

vBlanking OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable vertical blanking"
    ::= { paramEntry 96 }

deleteGroup1 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 97 }

deleteGroup2 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 98 }

deleteGroup3 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 99 }

deleteGroup4 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 100 }

embedBits1 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 1 (20/24 bit)"
    ::= { paramEntry 101 }

embedBits2 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 2 (20/24 bit)"
    ::= { paramEntry 102 }

embedBits3 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 3 (20/24 bit)"
    ::= { paramEntry 103 }

embedBits4 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 4 (20/24 bit)"
    ::= { paramEntry 104 }

cSBTransSDTV OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Channel Status Block Transparency in SDTV.
OFF: CSB is re-generated to guarantee compatibility with deembedders 
ON:  CSB is embedded, unchanged. Beware of possible imcompatibilities with certain deembedders"
    ::= { paramEntry 105 }

embedded11 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 1"
    ::= { paramEntry 106 }

embedded12 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 2"
    ::= { paramEntry 107 }

embedded13 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 3"
    ::= { paramEntry 108 }

embedded14 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 4"
    ::= { paramEntry 109 }

embedded21 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 1"
    ::= { paramEntry 110 }

embedded22 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 2"
    ::= { paramEntry 111 }

embedded23 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 3"
    ::= { paramEntry 112 }

embedded24 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 4"
    ::= { paramEntry 113 }

embedded31 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 1"
    ::= { paramEntry 114 }

embedded32 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 2"
    ::= { paramEntry 115 }

embedded33 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 3"
    ::= { paramEntry 116 }

embedded34 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 4"
    ::= { paramEntry 117 }

embedded41 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 1"
    ::= { paramEntry 118 }

embedded42 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 2"
    ::= { paramEntry 119 }

embedded43 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 3"
    ::= { paramEntry 120 }

embedded44 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 4"
    ::= { paramEntry 121 }

sourceAESOut11 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.1"
    ::= { paramEntry 124 }

sourceAESOut12 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.2"
    ::= { paramEntry 125 }

sourceAESOut21 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.1"
    ::= { paramEntry 129 }

sourceAESOut22 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.2"
    ::= { paramEntry 130 }

sourceAESOut31 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 3.1"
    ::= { paramEntry 134 }

sourceAESOut32 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 3.2"
    ::= { paramEntry 135 }

sourceAESOut41 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 4.1"
    ::= { paramEntry 139 }

sourceAESOut42 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 4.2"
    ::= { paramEntry 140 }

vFlag OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Activate Valid Audio Flag when missing audio on AES Inputs"
    ::= { paramEntry 142 }

deembPhaseSync OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
 All running channels are reset if one channel is added/removed.(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)

If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
    ::= { paramEntry 143 }

deembPhaseSyncVerify OBJECT-TYPE
    SYNTAX TypeDeembPhaseSyncVerify
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
    ::= { paramEntry 144 }

audioContentSDI1 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 145 }

audioContentSDI2 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 146 }

audioContentSDI3 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 147 }

audioContentSDI4 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 148 }

audioContentSDI5 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 149 }

audioContentSDI6 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 150 }

audioContentSDI7 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 151 }

audioContentSDI8 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 152 }

audioContentStatusSDI1 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.%2"
    ::= { paramEntry 153 }

audioContentStatusSDI2 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 2.%2"
    ::= { paramEntry 154 }

audioContentStatusSDI3 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 3.%2"
    ::= { paramEntry 155 }

audioContentStatusSDI4 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 4.%2"
    ::= { paramEntry 156 }

audioContentStatusSDI5 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 5.%2"
    ::= { paramEntry 157 }

audioContentStatusSDI6 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 6.%2"
    ::= { paramEntry 158 }

audioContentStatusSDI7 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 7.%2"
    ::= { paramEntry 159 }

audioContentStatusSDI8 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 8.%2"
    ::= { paramEntry 160 }

audioContentAES1 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 1"
    ::= { paramEntry 161 }

audioContentAES2 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 2"
    ::= { paramEntry 162 }

audioContentAES3 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 3"
    ::= { paramEntry 163 }

audioContentAES4 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 4"
    ::= { paramEntry 164 }

audioContentStatusAES1 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 1"
    ::= { paramEntry 165 }

audioContentStatusAES2 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 2"
    ::= { paramEntry 166 }

audioContentStatusAES3 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 3"
    ::= { paramEntry 167 }

audioContentStatusAES4 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 4"
    ::= { paramEntry 168 }

audioGain1L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 1L"
    ::= { paramEntry 169 }

audioMute1L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 1L"
    ::= { paramEntry 170 }

audioInvert1L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 1L"
    ::= { paramEntry 171 }

audioMixDown1L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 1L"
    ::= { paramEntry 172 }

audioSilence1L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 1L"
    ::= { paramEntry 173 }

audioOverload1L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 1L"
    ::= { paramEntry 174 }

audioTestTone1L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 1L"
    ::= { paramEntry 175 }

audioGain1R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 1R"
    ::= { paramEntry 176 }

audioMute1R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 1R"
    ::= { paramEntry 177 }

audioInvert1R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 1R"
    ::= { paramEntry 178 }

audioMixDown1R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 1R"
    ::= { paramEntry 179 }

audioSilence1R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 1R"
    ::= { paramEntry 180 }

audioOverload1R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 1R"
    ::= { paramEntry 181 }

audioTestTone1R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 1R"
    ::= { paramEntry 182 }

audioGain2L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 2L"
    ::= { paramEntry 183 }

audioMute2L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 2L"
    ::= { paramEntry 184 }

audioInvert2L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 2L"
    ::= { paramEntry 185 }

audioMixDown2L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 2L"
    ::= { paramEntry 186 }

audioSilence2L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 2L"
    ::= { paramEntry 187 }

audioOverload2L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 2L"
    ::= { paramEntry 188 }

audioTestTone2L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 2L"
    ::= { paramEntry 189 }

audioGain2R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 2R"
    ::= { paramEntry 190 }

audioMute2R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 2R"
    ::= { paramEntry 191 }

audioInvert2R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 2R"
    ::= { paramEntry 192 }

audioMixDown2R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 2R"
    ::= { paramEntry 193 }

audioSilence2R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 2R"
    ::= { paramEntry 194 }

audioOverload2R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 2R"
    ::= { paramEntry 195 }

audioTestTone2R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 2R"
    ::= { paramEntry 196 }

audioGain3L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 3L"
    ::= { paramEntry 197 }

audioMute3L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 3L"
    ::= { paramEntry 198 }

audioInvert3L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 3L"
    ::= { paramEntry 199 }

audioMixDown3L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 3L"
    ::= { paramEntry 200 }

audioSilence3L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 3L"
    ::= { paramEntry 201 }

audioOverload3L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 3L"
    ::= { paramEntry 202 }

audioTestTone3L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 3L"
    ::= { paramEntry 203 }

audioGain3R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 3R"
    ::= { paramEntry 204 }

audioMute3R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 3R"
    ::= { paramEntry 205 }

audioInvert3R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 3R"
    ::= { paramEntry 206 }

audioMixDown3R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 3R"
    ::= { paramEntry 207 }

audioSilence3R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 3R"
    ::= { paramEntry 208 }

audioOverload3R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 3R"
    ::= { paramEntry 209 }

audioTestTone3R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 3R"
    ::= { paramEntry 210 }

audioGain4L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 4L"
    ::= { paramEntry 211 }

audioMute4L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 4L"
    ::= { paramEntry 212 }

audioInvert4L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 4L"
    ::= { paramEntry 213 }

audioMixDown4L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 4L"
    ::= { paramEntry 214 }

audioSilence4L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 4L"
    ::= { paramEntry 215 }

audioOverload4L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 4L"
    ::= { paramEntry 216 }

audioTestTone4L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 4L"
    ::= { paramEntry 217 }

audioGain4R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 4R"
    ::= { paramEntry 218 }

audioMute4R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 4R"
    ::= { paramEntry 219 }

audioInvert4R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 4R"
    ::= { paramEntry 220 }

audioMixDown4R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 4R"
    ::= { paramEntry 221 }

audioSilence4R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 4R"
    ::= { paramEntry 222 }

audioOverload4R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 4R"
    ::= { paramEntry 223 }

audioTestTone4R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 4R"
    ::= { paramEntry 224 }

audioGain5L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 5L"
    ::= { paramEntry 225 }

audioMute5L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 5L"
    ::= { paramEntry 226 }

audioInvert5L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 5L"
    ::= { paramEntry 227 }

audioMixDown5L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 5L"
    ::= { paramEntry 228 }

audioSilence5L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 5L"
    ::= { paramEntry 229 }

audioOverload5L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 5L"
    ::= { paramEntry 230 }

audioTestTone5L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 5L"
    ::= { paramEntry 231 }

audioGain5R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 5R"
    ::= { paramEntry 232 }

audioMute5R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 5R"
    ::= { paramEntry 233 }

audioInvert5R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 5R"
    ::= { paramEntry 234 }

audioMixDown5R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 5R"
    ::= { paramEntry 235 }

audioSilence5R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 5R"
    ::= { paramEntry 236 }

audioOverload5R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 5R"
    ::= { paramEntry 237 }

audioTestTone5R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 5R"
    ::= { paramEntry 238 }

audioGain6L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 6L"
    ::= { paramEntry 239 }

audioMute6L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 6L"
    ::= { paramEntry 240 }

audioInvert6L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 6L"
    ::= { paramEntry 241 }

audioMixDown6L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 6L"
    ::= { paramEntry 242 }

audioSilence6L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 6L"
    ::= { paramEntry 243 }

audioOverload6L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 6L"
    ::= { paramEntry 244 }

audioTestTone6L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 6L"
    ::= { paramEntry 245 }

audioGain6R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 6R"
    ::= { paramEntry 246 }

audioMute6R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 6R"
    ::= { paramEntry 247 }

audioInvert6R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 6R"
    ::= { paramEntry 248 }

audioMixDown6R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 6R"
    ::= { paramEntry 249 }

audioSilence6R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 6R"
    ::= { paramEntry 250 }

audioOverload6R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 6R"
    ::= { paramEntry 251 }

audioTestTone6R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 6R"
    ::= { paramEntry 252 }

audioGain7L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 7L"
    ::= { paramEntry 253 }

audioMute7L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 7L"
    ::= { paramEntry 254 }

audioInvert7L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 7L"
    ::= { paramEntry 255 }

audioMixDown7L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 7L"
    ::= { paramEntry 256 }

audioSilence7L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 7L"
    ::= { paramEntry 257 }

audioOverload7L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 7L"
    ::= { paramEntry 258 }

audioTestTone7L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 7L"
    ::= { paramEntry 259 }

audioGain7R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 7R"
    ::= { paramEntry 260 }

audioMute7R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 7R"
    ::= { paramEntry 261 }

audioInvert7R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 7R"
    ::= { paramEntry 262 }

audioMixDown7R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 7R"
    ::= { paramEntry 263 }

audioSilence7R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 7R"
    ::= { paramEntry 264 }

audioOverload7R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 7R"
    ::= { paramEntry 265 }

audioTestTone7R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 7R"
    ::= { paramEntry 266 }

audioGain8L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 8L"
    ::= { paramEntry 267 }

audioMute8L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 8L"
    ::= { paramEntry 268 }

audioInvert8L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 8L"
    ::= { paramEntry 269 }

audioMixDown8L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 8L"
    ::= { paramEntry 270 }

audioSilence8L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 8L"
    ::= { paramEntry 271 }

audioOverload8L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 8L"
    ::= { paramEntry 272 }

audioTestTone8L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 8L"
    ::= { paramEntry 273 }

audioGain8R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 8R"
    ::= { paramEntry 274 }

audioMute8R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 8R"
    ::= { paramEntry 275 }

audioInvert8R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 8R"
    ::= { paramEntry 276 }

audioMixDown8R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 8R"
    ::= { paramEntry 277 }

audioSilence8R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 8R"
    ::= { paramEntry 278 }

audioOverload8R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 8R"
    ::= { paramEntry 279 }

audioTestTone8R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 8R"
    ::= { paramEntry 280 }

audioGain9L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 9L"
    ::= { paramEntry 281 }

audioMute9L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 9L"
    ::= { paramEntry 282 }

audioInvert9L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 9L"
    ::= { paramEntry 283 }

audioMixDown9L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 9L"
    ::= { paramEntry 284 }

audioSilence9L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 9L"
    ::= { paramEntry 285 }

audioOverload9L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 9L"
    ::= { paramEntry 286 }

audioTestTone9L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 9L"
    ::= { paramEntry 287 }

audioGain9R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 9R"
    ::= { paramEntry 288 }

audioMute9R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 9R"
    ::= { paramEntry 289 }

audioInvert9R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 9R"
    ::= { paramEntry 290 }

audioMixDown9R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 9R"
    ::= { paramEntry 291 }

audioSilence9R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 9R"
    ::= { paramEntry 292 }

audioOverload9R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 9R"
    ::= { paramEntry 293 }

audioTestTone9R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 9R"
    ::= { paramEntry 294 }

audioGain10L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 10L"
    ::= { paramEntry 295 }

audioMute10L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 10L"
    ::= { paramEntry 296 }

audioInvert10L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 10L"
    ::= { paramEntry 297 }

audioMixDown10L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 10L"
    ::= { paramEntry 298 }

audioSilence10L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 10L"
    ::= { paramEntry 299 }

audioOverload10L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 10L"
    ::= { paramEntry 300 }

audioTestTone10L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 10L"
    ::= { paramEntry 301 }

audioGain10R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 10R"
    ::= { paramEntry 302 }

audioMute10R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 10R"
    ::= { paramEntry 303 }

audioInvert10R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 10R"
    ::= { paramEntry 304 }

audioMixDown10R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 10R"
    ::= { paramEntry 305 }

audioSilence10R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 10R"
    ::= { paramEntry 306 }

audioOverload10R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 10R"
    ::= { paramEntry 307 }

audioTestTone10R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 10R"
    ::= { paramEntry 308 }

audioGain11L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 11L"
    ::= { paramEntry 309 }

audioMute11L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 11L"
    ::= { paramEntry 310 }

audioInvert11L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 11L"
    ::= { paramEntry 311 }

audioMixDown11L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 11L"
    ::= { paramEntry 312 }

audioSilence11L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 11L"
    ::= { paramEntry 313 }

audioOverload11L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 11L"
    ::= { paramEntry 314 }

audioTestTone11L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 11L"
    ::= { paramEntry 315 }

audioGain11R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 11R"
    ::= { paramEntry 316 }

audioMute11R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 11R"
    ::= { paramEntry 317 }

audioInvert11R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 11R"
    ::= { paramEntry 318 }

audioMixDown11R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 11R"
    ::= { paramEntry 319 }

audioSilence11R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 11R"
    ::= { paramEntry 320 }

audioOverload11R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 11R"
    ::= { paramEntry 321 }

audioTestTone11R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 11R"
    ::= { paramEntry 322 }

audioGain12L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 12L"
    ::= { paramEntry 323 }

audioMute12L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 12L"
    ::= { paramEntry 324 }

audioInvert12L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 12L"
    ::= { paramEntry 325 }

audioMixDown12L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 12L"
    ::= { paramEntry 326 }

audioSilence12L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 12L"
    ::= { paramEntry 327 }

audioOverload12L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 12L"
    ::= { paramEntry 328 }

audioTestTone12L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 12L"
    ::= { paramEntry 329 }

audioGain12R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 12R"
    ::= { paramEntry 330 }

audioMute12R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 12R"
    ::= { paramEntry 331 }

audioInvert12R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 12R"
    ::= { paramEntry 332 }

audioMixDown12R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 12R"
    ::= { paramEntry 333 }

audioSilence12R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 12R"
    ::= { paramEntry 334 }

audioOverload12R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 12R"
    ::= { paramEntry 335 }

audioTestTone12R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 12R"
    ::= { paramEntry 336 }

aESPortAssignment1 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 1 as input or output"
    ::= { paramEntry 337 }

aESPortAssignment2 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 2 as input or output"
    ::= { paramEntry 338 }

aESPortAssignment3 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 3 as input or output"
    ::= { paramEntry 339 }

aESPortAssignment4 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 4 as input or output"
    ::= { paramEntry 340 }

backpanelStatus OBJECT-TYPE
    SYNTAX TypeBackpanelStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication of the device backpanel"
    ::= { paramEntry 346 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 347 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 348 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 349 }

eventPrimaryPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Primary Power missing"
    ::= { paramEntry 350 }

eventRedundantPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Redundant Power missing"
    ::= { paramEntry 351 }

eventFanFailure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Fan Failure"
    ::= { paramEntry 352 }

eventReferenceNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Reference No Input"
    ::= { paramEntry 353 }

eventSDIInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: SDI Input 1 No Input"
    ::= { paramEntry 354 }

eventCouldnotlocktoReference OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Could not lock to Reference"
    ::= { paramEntry 355 }

eventCouldnotlocktoSDIInput1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Could not lock to SDI Input 1"
    ::= { paramEntry 356 }

eventAESInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 1 No Input"
    ::= { paramEntry 357 }

eventAESInput2NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 2 No Input"
    ::= { paramEntry 358 }

eventAESInput3NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 3 No Input"
    ::= { paramEntry 359 }

eventAESInput4NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 4 No Input"
    ::= { paramEntry 360 }

eventEmbedderMissingInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Embedder Missing Input"
    ::= { paramEntry 361 }

eventAESOutputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: AES Output No Input"
    ::= { paramEntry 362 }

eventPrimaryPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Primary Power missing"
    ::= { paramEntry 363 }

eventRedundantPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Redundant Power missing"
    ::= { paramEntry 364 }

eventFanFailureSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Fan Failure"
    ::= { paramEntry 365 }

eventReferenceNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Reference No Input"
    ::= { paramEntry 366 }

eventSDIInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 1 No Input"
    ::= { paramEntry 367 }

eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to Reference"
    ::= { paramEntry 368 }

eventCouldnotlocktoSDIInput1SNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to SDI Input 1"
    ::= { paramEntry 369 }

eventAESInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 1 No Input"
    ::= { paramEntry 370 }

eventAESInput2NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 2 No Input"
    ::= { paramEntry 371 }

eventAESInput3NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 3 No Input"
    ::= { paramEntry 372 }

eventAESInput4NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 4 No Input"
    ::= { paramEntry 373 }

eventEmbedderMissingInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Embedder Missing Input"
    ::= { paramEntry 374 }

eventAESOutputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output No Input"
    ::= { paramEntry 375 }

crossBarAudioOutEmbAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Crossbar for Embedded Audio Out AES"
    ::= { paramEntry 376 }

crossBarAudioOutAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Crossbar for External Audio Out AES"
    ::= { paramEntry 377 }

metaVPIDStandardConform OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify whether the line for VPID insertion into Field2 is set according to the SMPTE 352M-2002 Standard or not."
    ::= { paramEntry 378 }

aESOutIfNoIn OBJECT-TYPE
    SYNTAX TypeAESOutIfNoIn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the AES Output behaviour for missing input"
    ::= { paramEntry 379 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 380 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PDM5240-U parameters"
    ::= { sw743 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PDM5240-U parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    boardID Integer32,
    outStandard TypeOutStandard,
    inStandard TypeOutStandard,
    inAes1 TypeInAes1,
    inAes2 TypeInAes1,
    inAes3 TypeInAes1,
    inAes4 TypeInAes1,
    inGrp1 TypeInGrp1,
    inGrp2 TypeInGrp1,
    inGrp3 TypeInGrp1,
    inGrp4 TypeInGrp1,
    embedGroup1 OnOffValue,
    embedGroup2 OnOffValue,
    embedGroup3 OnOffValue,
    embedGroup4 OnOffValue,
    sampleRateConversion1 TypeSampleRateConversion1,
    sampleRateConversion2 TypeSampleRateConversion1,
    sampleRateConversion3 TypeSampleRateConversion1,
    sampleRateConversion4 TypeSampleRateConversion1,
    sourceEmbAESStereo112 TypeSourceEmbAESStereo112,
    sourceEmbAES11 TypeSourceEmbAES11,
    sourceEmbAES12 TypeSourceEmbAES11,
    sourceEmbAESStereo134 TypeSourceEmbAESStereo112,
    sourceEmbAES13 TypeSourceEmbAES11,
    sourceEmbAES14 TypeSourceEmbAES11,
    sourceEmbAESStereo212 TypeSourceEmbAESStereo112,
    sourceEmbAES21 TypeSourceEmbAES11,
    sourceEmbAES22 TypeSourceEmbAES11,
    sourceEmbAESStereo234 TypeSourceEmbAESStereo112,
    sourceEmbAES23 TypeSourceEmbAES11,
    sourceEmbAES24 TypeSourceEmbAES11,
    sourceEmbAESStereo312 TypeSourceEmbAESStereo112,
    sourceEmbAES31 TypeSourceEmbAES11,
    sourceEmbAES32 TypeSourceEmbAES11,
    sourceEmbAESStereo334 TypeSourceEmbAESStereo112,
    sourceEmbAES33 TypeSourceEmbAES11,
    sourceEmbAES34 TypeSourceEmbAES11,
    sourceEmbAESStereo412 TypeSourceEmbAESStereo112,
    sourceEmbAES41 TypeSourceEmbAES11,
    sourceEmbAES42 TypeSourceEmbAES11,
    sourceEmbAESStereo434 TypeSourceEmbAESStereo112,
    sourceEmbAES43 TypeSourceEmbAES11,
    sourceEmbAES44 TypeSourceEmbAES11,
    testToneFrequency TypeTestToneFrequency,
    hBlanking OnOffValue,
    vBlanking OnOffValue,
    deleteGroup1 TypeDeleteGroup1,
    deleteGroup2 TypeDeleteGroup1,
    deleteGroup3 TypeDeleteGroup1,
    deleteGroup4 TypeDeleteGroup1,
    embedBits1 TypeEmbedBits1,
    embedBits2 TypeEmbedBits1,
    embedBits3 TypeEmbedBits1,
    embedBits4 TypeEmbedBits1,
    cSBTransSDTV OnOffValue,
    embedded11 TypeEmbedded11,
    embedded12 TypeEmbedded11,
    embedded13 TypeEmbedded11,
    embedded14 TypeEmbedded11,
    embedded21 TypeEmbedded11,
    embedded22 TypeEmbedded11,
    embedded23 TypeEmbedded11,
    embedded24 TypeEmbedded11,
    embedded31 TypeEmbedded11,
    embedded32 TypeEmbedded11,
    embedded33 TypeEmbedded11,
    embedded34 TypeEmbedded11,
    embedded41 TypeEmbedded11,
    embedded42 TypeEmbedded11,
    embedded43 TypeEmbedded11,
    embedded44 TypeEmbedded11,
    sourceAESOut11 TypeSourceAESOut11,
    sourceAESOut12 TypeSourceAESOut11,
    sourceAESOut21 TypeSourceAESOut11,
    sourceAESOut22 TypeSourceAESOut11,
    sourceAESOut31 TypeSourceAESOut11,
    sourceAESOut32 TypeSourceAESOut11,
    sourceAESOut41 TypeSourceAESOut11,
    sourceAESOut42 TypeSourceAESOut11,
    vFlag OnOffValue,
    deembPhaseSync OnOffValue,
    deembPhaseSyncVerify TypeDeembPhaseSyncVerify,
    audioContentSDI1 TypeAudioContentSDI1,
    audioContentSDI2 TypeAudioContentSDI1,
    audioContentSDI3 TypeAudioContentSDI1,
    audioContentSDI4 TypeAudioContentSDI1,
    audioContentSDI5 TypeAudioContentSDI1,
    audioContentSDI6 TypeAudioContentSDI1,
    audioContentSDI7 TypeAudioContentSDI1,
    audioContentSDI8 TypeAudioContentSDI1,
    audioContentStatusSDI1 TypeAudioContentStatusSDI1,
    audioContentStatusSDI2 TypeAudioContentStatusSDI1,
    audioContentStatusSDI3 TypeAudioContentStatusSDI1,
    audioContentStatusSDI4 TypeAudioContentStatusSDI1,
    audioContentStatusSDI5 TypeAudioContentStatusSDI1,
    audioContentStatusSDI6 TypeAudioContentStatusSDI1,
    audioContentStatusSDI7 TypeAudioContentStatusSDI1,
    audioContentStatusSDI8 TypeAudioContentStatusSDI1,
    audioContentAES1 TypeAudioContentSDI1,
    audioContentAES2 TypeAudioContentSDI1,
    audioContentAES3 TypeAudioContentSDI1,
    audioContentAES4 TypeAudioContentSDI1,
    audioContentStatusAES1 TypeAudioContentStatusSDI1,
    audioContentStatusAES2 TypeAudioContentStatusSDI1,
    audioContentStatusAES3 TypeAudioContentStatusSDI1,
    audioContentStatusAES4 TypeAudioContentStatusSDI1,
    audioGain1L FixedPointValue1,
    audioMute1L TypeAudioMute1L,
    audioInvert1L TypeAudioInvert1L,
    audioMixDown1L OnOffValue,
    audioSilence1L TypeAudioSilence1L,
    audioOverload1L TypeAudioOverload1L,
    audioTestTone1L OnOffValue,
    audioGain1R FixedPointValue1,
    audioMute1R TypeAudioMute1L,
    audioInvert1R TypeAudioInvert1L,
    audioMixDown1R OnOffValue,
    audioSilence1R TypeAudioSilence1L,
    audioOverload1R TypeAudioOverload1L,
    audioTestTone1R OnOffValue,
    audioGain2L FixedPointValue1,
    audioMute2L TypeAudioMute1L,
    audioInvert2L TypeAudioInvert1L,
    audioMixDown2L OnOffValue,
    audioSilence2L TypeAudioSilence1L,
    audioOverload2L TypeAudioOverload1L,
    audioTestTone2L OnOffValue,
    audioGain2R FixedPointValue1,
    audioMute2R TypeAudioMute1L,
    audioInvert2R TypeAudioInvert1L,
    audioMixDown2R OnOffValue,
    audioSilence2R TypeAudioSilence1L,
    audioOverload2R TypeAudioOverload1L,
    audioTestTone2R OnOffValue,
    audioGain3L FixedPointValue1,
    audioMute3L TypeAudioMute1L,
    audioInvert3L TypeAudioInvert1L,
    audioMixDown3L OnOffValue,
    audioSilence3L TypeAudioSilence1L,
    audioOverload3L TypeAudioOverload1L,
    audioTestTone3L OnOffValue,
    audioGain3R FixedPointValue1,
    audioMute3R TypeAudioMute1L,
    audioInvert3R TypeAudioInvert1L,
    audioMixDown3R OnOffValue,
    audioSilence3R TypeAudioSilence1L,
    audioOverload3R TypeAudioOverload1L,
    audioTestTone3R OnOffValue,
    audioGain4L FixedPointValue1,
    audioMute4L TypeAudioMute1L,
    audioInvert4L TypeAudioInvert1L,
    audioMixDown4L OnOffValue,
    audioSilence4L TypeAudioSilence1L,
    audioOverload4L TypeAudioOverload1L,
    audioTestTone4L OnOffValue,
    audioGain4R FixedPointValue1,
    audioMute4R TypeAudioMute1L,
    audioInvert4R TypeAudioInvert1L,
    audioMixDown4R OnOffValue,
    audioSilence4R TypeAudioSilence1L,
    audioOverload4R TypeAudioOverload1L,
    audioTestTone4R OnOffValue,
    audioGain5L FixedPointValue1,
    audioMute5L TypeAudioMute1L,
    audioInvert5L TypeAudioInvert1L,
    audioMixDown5L OnOffValue,
    audioSilence5L TypeAudioSilence1L,
    audioOverload5L TypeAudioOverload1L,
    audioTestTone5L OnOffValue,
    audioGain5R FixedPointValue1,
    audioMute5R TypeAudioMute1L,
    audioInvert5R TypeAudioInvert1L,
    audioMixDown5R OnOffValue,
    audioSilence5R TypeAudioSilence1L,
    audioOverload5R TypeAudioOverload1L,
    audioTestTone5R OnOffValue,
    audioGain6L FixedPointValue1,
    audioMute6L TypeAudioMute1L,
    audioInvert6L TypeAudioInvert1L,
    audioMixDown6L OnOffValue,
    audioSilence6L TypeAudioSilence1L,
    audioOverload6L TypeAudioOverload1L,
    audioTestTone6L OnOffValue,
    audioGain6R FixedPointValue1,
    audioMute6R TypeAudioMute1L,
    audioInvert6R TypeAudioInvert1L,
    audioMixDown6R OnOffValue,
    audioSilence6R TypeAudioSilence1L,
    audioOverload6R TypeAudioOverload1L,
    audioTestTone6R OnOffValue,
    audioGain7L FixedPointValue1,
    audioMute7L TypeAudioMute1L,
    audioInvert7L TypeAudioInvert1L,
    audioMixDown7L OnOffValue,
    audioSilence7L TypeAudioSilence1L,
    audioOverload7L TypeAudioOverload1L,
    audioTestTone7L OnOffValue,
    audioGain7R FixedPointValue1,
    audioMute7R TypeAudioMute1L,
    audioInvert7R TypeAudioInvert1L,
    audioMixDown7R OnOffValue,
    audioSilence7R TypeAudioSilence1L,
    audioOverload7R TypeAudioOverload1L,
    audioTestTone7R OnOffValue,
    audioGain8L FixedPointValue1,
    audioMute8L TypeAudioMute1L,
    audioInvert8L TypeAudioInvert1L,
    audioMixDown8L OnOffValue,
    audioSilence8L TypeAudioSilence1L,
    audioOverload8L TypeAudioOverload1L,
    audioTestTone8L OnOffValue,
    audioGain8R FixedPointValue1,
    audioMute8R TypeAudioMute1L,
    audioInvert8R TypeAudioInvert1L,
    audioMixDown8R OnOffValue,
    audioSilence8R TypeAudioSilence1L,
    audioOverload8R TypeAudioOverload1L,
    audioTestTone8R OnOffValue,
    audioGain9L FixedPointValue1,
    audioMute9L TypeAudioMute1L,
    audioInvert9L TypeAudioInvert1L,
    audioMixDown9L OnOffValue,
    audioSilence9L TypeAudioSilence1L,
    audioOverload9L TypeAudioOverload1L,
    audioTestTone9L OnOffValue,
    audioGain9R FixedPointValue1,
    audioMute9R TypeAudioMute1L,
    audioInvert9R TypeAudioInvert1L,
    audioMixDown9R OnOffValue,
    audioSilence9R TypeAudioSilence1L,
    audioOverload9R TypeAudioOverload1L,
    audioTestTone9R OnOffValue,
    audioGain10L FixedPointValue1,
    audioMute10L TypeAudioMute1L,
    audioInvert10L TypeAudioInvert1L,
    audioMixDown10L OnOffValue,
    audioSilence10L TypeAudioSilence1L,
    audioOverload10L TypeAudioOverload1L,
    audioTestTone10L OnOffValue,
    audioGain10R FixedPointValue1,
    audioMute10R TypeAudioMute1L,
    audioInvert10R TypeAudioInvert1L,
    audioMixDown10R OnOffValue,
    audioSilence10R TypeAudioSilence1L,
    audioOverload10R TypeAudioOverload1L,
    audioTestTone10R OnOffValue,
    audioGain11L FixedPointValue1,
    audioMute11L TypeAudioMute1L,
    audioInvert11L TypeAudioInvert1L,
    audioMixDown11L OnOffValue,
    audioSilence11L TypeAudioSilence1L,
    audioOverload11L TypeAudioOverload1L,
    audioTestTone11L OnOffValue,
    audioGain11R FixedPointValue1,
    audioMute11R TypeAudioMute1L,
    audioInvert11R TypeAudioInvert1L,
    audioMixDown11R OnOffValue,
    audioSilence11R TypeAudioSilence1L,
    audioOverload11R TypeAudioOverload1L,
    audioTestTone11R OnOffValue,
    audioGain12L FixedPointValue1,
    audioMute12L TypeAudioMute1L,
    audioInvert12L TypeAudioInvert1L,
    audioMixDown12L OnOffValue,
    audioSilence12L TypeAudioSilence1L,
    audioOverload12L TypeAudioOverload1L,
    audioTestTone12L OnOffValue,
    audioGain12R FixedPointValue1,
    audioMute12R TypeAudioMute1L,
    audioInvert12R TypeAudioInvert1L,
    audioMixDown12R OnOffValue,
    audioSilence12R TypeAudioSilence1L,
    audioOverload12R TypeAudioOverload1L,
    audioTestTone12R OnOffValue,
    aESPortAssignment1 TypeAESPortAssignment1,
    aESPortAssignment2 TypeAESPortAssignment1,
    aESPortAssignment3 TypeAESPortAssignment1,
    aESPortAssignment4 TypeAESPortAssignment1,
    backpanelStatus TypeBackpanelStatus,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    eventPrimaryPowermissing OnOffValue,
    eventRedundantPowermissing OnOffValue,
    eventFanFailure OnOffValue,
    eventReferenceNoInput OnOffValue,
    eventSDIInput1NoInput OnOffValue,
    eventCouldnotlocktoReference OnOffValue,
    eventCouldnotlocktoSDIInput1 OnOffValue,
    eventAESInput1NoInput OnOffValue,
    eventAESInput2NoInput OnOffValue,
    eventAESInput3NoInput OnOffValue,
    eventAESInput4NoInput OnOffValue,
    eventEmbedderMissingInput OnOffValue,
    eventAESOutputNoInput OnOffValue,
    eventPrimaryPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventRedundantPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventFanFailureSNMP TypeEventPrimaryPowermissingSNMP,
    eventReferenceNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput1NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventCouldnotlocktoReferenceSNMP TypeEventPrimaryPowermissingSNMP,
    eventCouldnotlocktoSDIInput1SNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput1NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput2NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput3NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput4NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventEmbedderMissingInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESOutputNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    crossBarAudioOutEmbAES DisplayString,
    crossBarAudioOutAES DisplayString,
    metaVPIDStandardConform OnOffValue,
    aESOutIfNoIn TypeAESOutIfNoIn,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PDM5240-U"
    ::= { sw743 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        lock,
        locate,
        boardID,
        outStandard,
        inStandard,
        inAes1,
        inAes2,
        inAes3,
        inAes4,
        inGrp1,
        inGrp2,
        inGrp3,
        inGrp4,
        embedGroup1,
        embedGroup2,
        embedGroup3,
        embedGroup4,
        sampleRateConversion1,
        sampleRateConversion2,
        sampleRateConversion3,
        sampleRateConversion4,
        sourceEmbAESStereo112,
        sourceEmbAES11,
        sourceEmbAES12,
        sourceEmbAESStereo134,
        sourceEmbAES13,
        sourceEmbAES14,
        sourceEmbAESStereo212,
        sourceEmbAES21,
        sourceEmbAES22,
        sourceEmbAESStereo234,
        sourceEmbAES23,
        sourceEmbAES24,
        sourceEmbAESStereo312,
        sourceEmbAES31,
        sourceEmbAES32,
        sourceEmbAESStereo334,
        sourceEmbAES33,
        sourceEmbAES34,
        sourceEmbAESStereo412,
        sourceEmbAES41,
        sourceEmbAES42,
        sourceEmbAESStereo434,
        sourceEmbAES43,
        sourceEmbAES44,
        testToneFrequency,
        hBlanking,
        vBlanking,
        deleteGroup1,
        deleteGroup2,
        deleteGroup3,
        deleteGroup4,
        embedBits1,
        embedBits2,
        embedBits3,
        embedBits4,
        cSBTransSDTV,
        embedded11,
        embedded12,
        embedded13,
        embedded14,
        embedded21,
        embedded22,
        embedded23,
        embedded24,
        embedded31,
        embedded32,
        embedded33,
        embedded34,
        embedded41,
        embedded42,
        embedded43,
        embedded44,
        sourceAESOut11,
        sourceAESOut12,
        sourceAESOut21,
        sourceAESOut22,
        sourceAESOut31,
        sourceAESOut32,
        sourceAESOut41,
        sourceAESOut42,
        vFlag,
        deembPhaseSync,
        deembPhaseSyncVerify,
        audioContentSDI1,
        audioContentSDI2,
        audioContentSDI3,
        audioContentSDI4,
        audioContentSDI5,
        audioContentSDI6,
        audioContentSDI7,
        audioContentSDI8,
        audioContentStatusSDI1,
        audioContentStatusSDI2,
        audioContentStatusSDI3,
        audioContentStatusSDI4,
        audioContentStatusSDI5,
        audioContentStatusSDI6,
        audioContentStatusSDI7,
        audioContentStatusSDI8,
        audioContentAES1,
        audioContentAES2,
        audioContentAES3,
        audioContentAES4,
        audioContentStatusAES1,
        audioContentStatusAES2,
        audioContentStatusAES3,
        audioContentStatusAES4,
        audioGain1L,
        audioMute1L,
        audioInvert1L,
        audioMixDown1L,
        audioSilence1L,
        audioOverload1L,
        audioTestTone1L,
        audioGain1R,
        audioMute1R,
        audioInvert1R,
        audioMixDown1R,
        audioSilence1R,
        audioOverload1R,
        audioTestTone1R,
        audioGain2L,
        audioMute2L,
        audioInvert2L,
        audioMixDown2L,
        audioSilence2L,
        audioOverload2L,
        audioTestTone2L,
        audioGain2R,
        audioMute2R,
        audioInvert2R,
        audioMixDown2R,
        audioSilence2R,
        audioOverload2R,
        audioTestTone2R,
        audioGain3L,
        audioMute3L,
        audioInvert3L,
        audioMixDown3L,
        audioSilence3L,
        audioOverload3L,
        audioTestTone3L,
        audioGain3R,
        audioMute3R,
        audioInvert3R,
        audioMixDown3R,
        audioSilence3R,
        audioOverload3R,
        audioTestTone3R,
        audioGain4L,
        audioMute4L,
        audioInvert4L,
        audioMixDown4L,
        audioSilence4L,
        audioOverload4L,
        audioTestTone4L,
        audioGain4R,
        audioMute4R,
        audioInvert4R,
        audioMixDown4R,
        audioSilence4R,
        audioOverload4R,
        audioTestTone4R,
        audioGain5L,
        audioMute5L,
        audioInvert5L,
        audioMixDown5L,
        audioSilence5L,
        audioOverload5L,
        audioTestTone5L,
        audioGain5R,
        audioMute5R,
        audioInvert5R,
        audioMixDown5R,
        audioSilence5R,
        audioOverload5R,
        audioTestTone5R,
        audioGain6L,
        audioMute6L,
        audioInvert6L,
        audioMixDown6L,
        audioSilence6L,
        audioOverload6L,
        audioTestTone6L,
        audioGain6R,
        audioMute6R,
        audioInvert6R,
        audioMixDown6R,
        audioSilence6R,
        audioOverload6R,
        audioTestTone6R,
        audioGain7L,
        audioMute7L,
        audioInvert7L,
        audioMixDown7L,
        audioSilence7L,
        audioOverload7L,
        audioTestTone7L,
        audioGain7R,
        audioMute7R,
        audioInvert7R,
        audioMixDown7R,
        audioSilence7R,
        audioOverload7R,
        audioTestTone7R,
        audioGain8L,
        audioMute8L,
        audioInvert8L,
        audioMixDown8L,
        audioSilence8L,
        audioOverload8L,
        audioTestTone8L,
        audioGain8R,
        audioMute8R,
        audioInvert8R,
        audioMixDown8R,
        audioSilence8R,
        audioOverload8R,
        audioTestTone8R,
        audioGain9L,
        audioMute9L,
        audioInvert9L,
        audioMixDown9L,
        audioSilence9L,
        audioOverload9L,
        audioTestTone9L,
        audioGain9R,
        audioMute9R,
        audioInvert9R,
        audioMixDown9R,
        audioSilence9R,
        audioOverload9R,
        audioTestTone9R,
        audioGain10L,
        audioMute10L,
        audioInvert10L,
        audioMixDown10L,
        audioSilence10L,
        audioOverload10L,
        audioTestTone10L,
        audioGain10R,
        audioMute10R,
        audioInvert10R,
        audioMixDown10R,
        audioSilence10R,
        audioOverload10R,
        audioTestTone10R,
        audioGain11L,
        audioMute11L,
        audioInvert11L,
        audioMixDown11L,
        audioSilence11L,
        audioOverload11L,
        audioTestTone11L,
        audioGain11R,
        audioMute11R,
        audioInvert11R,
        audioMixDown11R,
        audioSilence11R,
        audioOverload11R,
        audioTestTone11R,
        audioGain12L,
        audioMute12L,
        audioInvert12L,
        audioMixDown12L,
        audioSilence12L,
        audioOverload12L,
        audioTestTone12L,
        audioGain12R,
        audioMute12R,
        audioInvert12R,
        audioMixDown12R,
        audioSilence12R,
        audioOverload12R,
        audioTestTone12R,
        aESPortAssignment1,
        aESPortAssignment2,
        aESPortAssignment3,
        aESPortAssignment4,
        backpanelStatus,
        statusColor,
        statusColorRGB,
        statusText,
        eventPrimaryPowermissing,
        eventRedundantPowermissing,
        eventFanFailure,
        eventReferenceNoInput,
        eventSDIInput1NoInput,
        eventCouldnotlocktoReference,
        eventCouldnotlocktoSDIInput1,
        eventAESInput1NoInput,
        eventAESInput2NoInput,
        eventAESInput3NoInput,
        eventAESInput4NoInput,
        eventEmbedderMissingInput,
        eventAESOutputNoInput,
        eventPrimaryPowermissingSNMP,
        eventRedundantPowermissingSNMP,
        eventFanFailureSNMP,
        eventReferenceNoInputSNMP,
        eventSDIInput1NoInputSNMP,
        eventCouldnotlocktoReferenceSNMP,
        eventCouldnotlocktoSDIInput1SNMP,
        eventAESInput1NoInputSNMP,
        eventAESInput2NoInputSNMP,
        eventAESInput3NoInputSNMP,
        eventAESInput4NoInputSNMP,
        eventEmbedderMissingInputSNMP,
        eventAESOutputNoInputSNMP,
        crossBarAudioOutEmbAES,
        crossBarAudioOutAES,
        metaVPIDStandardConform,
        aESOutIfNoIn,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END