-- Machine generated MIB file, do not edit!
--
-- MIB file for PDM5340, type code 12.C9, software label 742
-- Generated on Tuesday, 09-Aug-16 15:21:52 UTC
-- CVS $Id: PDM5340_12c9_sw742.mib,v 1.1 2016/08/09 15:21:53 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PDM5340-12c9-sw742-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pdm5340-12c9-sw742 MODULE-IDENTITY
    LAST-UPDATED "201608091521Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PDM5340, type code 12.C9, software label 742"
    REVISION "201608091521Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 4809742 }

pdm5340-12c9 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PDM5340"
    ::= { products 4809 }

sw742 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 742"
    ::= { pdm5340-12c9 742 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeBackpanelStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        missing(1),
        present(2)
    }

TypeOutStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27)
    }

TypeInAudioStatus11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        missing(1),
        async(2),
        present(3)
    }

TypeInGrp1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nASDIMissing(0),
        nASDIInvalid(1),
        none(2),
        inserted(3),
        present(4),
        removed(5),
        overwritten(6)
    }

TypeSourceEmbAESStereo112 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aESInt1(0),
        aESInt2(1),
        aESInt3(2),
        aESInt4(3),
        aESInt5(4),
        aESInt6(5),
        aESInt7(6),
        aESInt8(7),
        audExt1(8),
        audExt2(9),
        mute(10)
    }

TypeSourceEmbAES11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aESInt11(0),
        aESInt12(1),
        aESInt13(2),
        aESInt14(3),
        aESInt21(4),
        aESInt22(5),
        aESInt23(6),
        aESInt24(7),
        aESInt31(8),
        aESInt32(9),
        aESInt33(10),
        aESInt34(11),
        aESInt41(12),
        aESInt42(13),
        aESInt43(14),
        aESInt44(15),
        audExt11(16),
        audExt12(17),
        audExt21(18),
        audExt22(19),
        muteL(20),
        muteR(21)
    }

TypeTestToneFrequency ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n1000Hz(0),
        n1010Hz(1)
    }

TypeDeleteGroup1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        keep(0),
        del(1)
    }

TypeEmbedBits1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n20Bit(0),
        n24Bit(1)
    }

TypeFSLevelInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n12dB(0),
        n15dB(1),
        n18dB(2),
        n22dB(3),
        n24dB(4)
    }

TypeEmbedded11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        present(0),
        notEmbedded(1)
    }

TypeSourceAESOut11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        intAES11(0),
        intAES12(1),
        intAES13(2),
        intAES14(3),
        intAES21(4),
        intAES22(5),
        intAES23(6),
        intAES24(7),
        intAES31(8),
        intAES32(9),
        intAES33(10),
        intAES34(11),
        intAES41(12),
        intAES42(13),
        intAES43(14),
        intAES44(15),
        extAES11(16),
        extAES12(17),
        extAES21(18),
        extAES22(19),
        muteL(20),
        muteR(21)
    }

TypeDeembPhaseSyncVerify ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeAudioContentSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeAudioContentStatusSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeAudioMute1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        norm(0),
        mute(1)
    }

TypeAudioInvert1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        norm(0),
        inv(1)
    }

TypeAudioSilence1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        silence(0),
        noSilence(1)
    }

TypeAudioOverload1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        ok(0),
        overload(1)
    }

TypeAudioPortAssignment1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input(0),
        output(1)
    }

TypeEventPrimaryPowermissingSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

backpanelStatus OBJECT-TYPE
    SYNTAX TypeBackpanelStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication of the device backpanel"
    ::= { paramEntry 13 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 14 }

eventPrimaryPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Primary Power missing"
    ::= { paramEntry 16 }

eventRedundantPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Redundant Power missing"
    ::= { paramEntry 17 }

eventFanFailure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Fan Failure"
    ::= { paramEntry 18 }

eventSDIInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: SDI Input 1 No Input"
    ::= { paramEntry 19 }

eventAudioInput1LNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 1L No Input"
    ::= { paramEntry 20 }

eventAudioInput1RNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 1R No Input"
    ::= { paramEntry 21 }

eventAudioInput2LNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 2L No Input"
    ::= { paramEntry 22 }

eventAudioInput2RNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Audio Input 2R No Input"
    ::= { paramEntry 23 }

eventAudioInput3LNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio Input 3L: No Input"
    ::= { paramEntry 24 }

eventAudioInput3RNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio Input 3R: No Input"
    ::= { paramEntry 25 }

eventAudioInput4LNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio Input 4L: No Input"
    ::= { paramEntry 26 }

eventAudioInput4RNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio Input 4R: No Input"
    ::= { paramEntry 27 }

eventEmbedderMissingInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Embedder Missing Input"
    ::= { paramEntry 28 }

eventAudioOutputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Audio Output No Input"
    ::= { paramEntry 29 }

outStandard OBJECT-TYPE
    SYNTAX TypeOutStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI output"
    ::= { paramEntry 30 }

inStandard OBJECT-TYPE
    SYNTAX TypeOutStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input status indication"
    ::= { paramEntry 31 }

inAudioStatus11 OBJECT-TYPE
    SYNTAX TypeInAudioStatus11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status Analog Input 1, Left"
    ::= { paramEntry 32 }

inAudioStatus12 OBJECT-TYPE
    SYNTAX TypeInAudioStatus11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status Analog Input 1, Right"
    ::= { paramEntry 33 }

inAudioStatus21 OBJECT-TYPE
    SYNTAX TypeInAudioStatus11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status Analog Input 2, Left"
    ::= { paramEntry 34 }

inAudioStatus22 OBJECT-TYPE
    SYNTAX TypeInAudioStatus11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status Analog Input 2, Right"
    ::= { paramEntry 35 }

inGrp1 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 36 }

inGrp2 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 37 }

inGrp3 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 38 }

inGrp4 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 39 }

embedGroup1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 1 into the video output"
    ::= { paramEntry 40 }

embedGroup2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 2 into the video output"
    ::= { paramEntry 41 }

embedGroup3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 3 into the video output"
    ::= { paramEntry 42 }

embedGroup4 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 4 into the video output"
    ::= { paramEntry 43 }

sourceEmbAESStereo112 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 1.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES1.1-2.1 and SourceEmbAES1.1-2.2"
    ::= { paramEntry 65 }

sourceEmbAES11 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.1"
    ::= { paramEntry 66 }

sourceEmbAES12 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.2"
    ::= { paramEntry 68 }

sourceEmbAESStereo134 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 1.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES1.3-4.1 and SourceEmbAES1.3-4.2"
    ::= { paramEntry 70 }

sourceEmbAES13 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.3"
    ::= { paramEntry 71 }

sourceEmbAES14 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.4"
    ::= { paramEntry 73 }

sourceEmbAESStereo212 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 2.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES2.1-2.1 and SourceEmbAES2.1-2.2"
    ::= { paramEntry 75 }

sourceEmbAES21 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.1"
    ::= { paramEntry 76 }

sourceEmbAES22 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.2"
    ::= { paramEntry 78 }

sourceEmbAESStereo234 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 2.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES2.3-4.1 and SourceEmbAES2.3-4.2"
    ::= { paramEntry 80 }

sourceEmbAES23 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.3"
    ::= { paramEntry 81 }

sourceEmbAES24 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.4"
    ::= { paramEntry 83 }

sourceEmbAESStereo312 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 3.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES3.1-2.1 and SourceEmbAES3.1-2.2"
    ::= { paramEntry 85 }

sourceEmbAES31 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.1"
    ::= { paramEntry 86 }

sourceEmbAES32 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.2"
    ::= { paramEntry 88 }

sourceEmbAESStereo334 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 3.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES3.3-4.1 and SourceEmbAES3.3-4.2"
    ::= { paramEntry 90 }

sourceEmbAES33 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.3"
    ::= { paramEntry 91 }

sourceEmbAES34 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.4"
    ::= { paramEntry 93 }

sourceEmbAESStereo412 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 4.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES4.1-2.1 and SourceEmbAES4.1-2.2"
    ::= { paramEntry 95 }

sourceEmbAES41 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.1"
    ::= { paramEntry 96 }

sourceEmbAES42 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.2"
    ::= { paramEntry 98 }

sourceEmbAESStereo434 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 4.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES4.3-4.1 and SourceEmbAES4.3-4.2"
    ::= { paramEntry 100 }

sourceEmbAES43 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.3"
    ::= { paramEntry 101 }

sourceEmbAES44 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.4"
    ::= { paramEntry 103 }

testToneFrequency OBJECT-TYPE
    SYNTAX TypeTestToneFrequency
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Frequency for the Test Tone"
    ::= { paramEntry 104 }

hBlanking OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable horizontal blanking"
    ::= { paramEntry 105 }

vBlanking OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable vertical blanking"
    ::= { paramEntry 106 }

deleteGroup1 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 107 }

deleteGroup2 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 108 }

deleteGroup3 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 109 }

deleteGroup4 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 110 }

embedBits1 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 1 (20/24 bit)"
    ::= { paramEntry 111 }

embedBits2 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 2 (20/24 bit)"
    ::= { paramEntry 112 }

embedBits3 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 3 (20/24 bit)"
    ::= { paramEntry 113 }

embedBits4 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 4 (20/24 bit)"
    ::= { paramEntry 114 }

fSLevelInput OBJECT-TYPE
    SYNTAX TypeFSLevelInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Full-Scale level for all analog Audio Inputs"
    ::= { paramEntry 115 }

fSLevelOutput OBJECT-TYPE
    SYNTAX TypeFSLevelInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Full-Scale level for all analog Audio Outputs"
    ::= { paramEntry 116 }

cSBTransSDTV OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Channel Status Block Transparency in SDTV.
OFF: CSB is re-generated to guarantee compatibility with deembedders 
ON:  CSB is embedded, unchanged. Beware of possible imcompatibilities with certain deembedders"
    ::= { paramEntry 117 }

embedded11 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 1"
    ::= { paramEntry 118 }

embedded12 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 2"
    ::= { paramEntry 119 }

embedded13 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 3"
    ::= { paramEntry 120 }

embedded14 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 4"
    ::= { paramEntry 121 }

embedded21 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 1"
    ::= { paramEntry 122 }

embedded22 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 2"
    ::= { paramEntry 123 }

embedded23 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 3"
    ::= { paramEntry 124 }

embedded24 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 4"
    ::= { paramEntry 125 }

embedded31 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 1"
    ::= { paramEntry 126 }

embedded32 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 2"
    ::= { paramEntry 127 }

embedded33 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 3"
    ::= { paramEntry 128 }

embedded34 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 4"
    ::= { paramEntry 129 }

embedded41 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 1"
    ::= { paramEntry 130 }

embedded42 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 2"
    ::= { paramEntry 131 }

embedded43 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 3"
    ::= { paramEntry 132 }

embedded44 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 4"
    ::= { paramEntry 133 }

sourceAESOut11 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.1"
    ::= { paramEntry 136 }

sourceAESOut12 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.2"
    ::= { paramEntry 137 }

sourceAESOut21 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.1"
    ::= { paramEntry 141 }

sourceAESOut22 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.2"
    ::= { paramEntry 142 }

vFlag OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Activate Valid Audio Flag when missing audio on AES Inputs"
    ::= { paramEntry 144 }

deembPhaseSync OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
 All running channels are reset if one channel is added/removed.(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)

If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
    ::= { paramEntry 145 }

deembPhaseSyncVerify OBJECT-TYPE
    SYNTAX TypeDeembPhaseSyncVerify
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
    ::= { paramEntry 146 }

audioContentSDI1 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 147 }

audioContentSDI2 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 148 }

audioContentSDI3 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 149 }

audioContentSDI4 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 150 }

audioContentSDI5 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 151 }

audioContentSDI6 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 152 }

audioContentSDI7 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 153 }

audioContentSDI8 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 154 }

audioContentStatusSDI1 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.%2"
    ::= { paramEntry 155 }

audioContentStatusSDI2 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 2.%2"
    ::= { paramEntry 156 }

audioContentStatusSDI3 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 3.%2"
    ::= { paramEntry 157 }

audioContentStatusSDI4 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 4.%2"
    ::= { paramEntry 158 }

audioContentStatusSDI5 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 5.%2"
    ::= { paramEntry 159 }

audioContentStatusSDI6 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 6.%2"
    ::= { paramEntry 160 }

audioContentStatusSDI7 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 7.%2"
    ::= { paramEntry 161 }

audioContentStatusSDI8 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 8.%2"
    ::= { paramEntry 162 }

audioContentAES1 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 1"
    ::= { paramEntry 163 }

audioContentAES2 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 2"
    ::= { paramEntry 164 }

audioContentStatusAES1 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 1"
    ::= { paramEntry 165 }

audioContentStatusAES2 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 2"
    ::= { paramEntry 166 }

audioGain1L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 1L"
    ::= { paramEntry 167 }

audioMute1L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 1L"
    ::= { paramEntry 168 }

audioInvert1L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 1L"
    ::= { paramEntry 169 }

audioMixDown1L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 1L"
    ::= { paramEntry 170 }

audioSilence1L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 1L"
    ::= { paramEntry 171 }

audioOverload1L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 1L"
    ::= { paramEntry 172 }

audioTestTone1L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 1L"
    ::= { paramEntry 173 }

audioGain1R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 1R"
    ::= { paramEntry 174 }

audioMute1R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 1R"
    ::= { paramEntry 175 }

audioInvert1R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 1R"
    ::= { paramEntry 176 }

audioMixDown1R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 1R"
    ::= { paramEntry 177 }

audioSilence1R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 1R"
    ::= { paramEntry 178 }

audioOverload1R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 1R"
    ::= { paramEntry 179 }

audioTestTone1R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 1R"
    ::= { paramEntry 180 }

audioGain2L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 2L"
    ::= { paramEntry 181 }

audioMute2L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 2L"
    ::= { paramEntry 182 }

audioInvert2L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 2L"
    ::= { paramEntry 183 }

audioMixDown2L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 2L"
    ::= { paramEntry 184 }

audioSilence2L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 2L"
    ::= { paramEntry 185 }

audioOverload2L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 2L"
    ::= { paramEntry 186 }

audioTestTone2L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 2L"
    ::= { paramEntry 187 }

audioGain2R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 2R"
    ::= { paramEntry 188 }

audioMute2R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 2R"
    ::= { paramEntry 189 }

audioInvert2R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 2R"
    ::= { paramEntry 190 }

audioMixDown2R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 2R"
    ::= { paramEntry 191 }

audioSilence2R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 2R"
    ::= { paramEntry 192 }

audioOverload2R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 2R"
    ::= { paramEntry 193 }

audioTestTone2R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 2R"
    ::= { paramEntry 194 }

audioGain3L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 3L"
    ::= { paramEntry 195 }

audioMute3L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 3L"
    ::= { paramEntry 196 }

audioInvert3L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 3L"
    ::= { paramEntry 197 }

audioMixDown3L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 3L"
    ::= { paramEntry 198 }

audioSilence3L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 3L"
    ::= { paramEntry 199 }

audioOverload3L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 3L"
    ::= { paramEntry 200 }

audioTestTone3L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 3L"
    ::= { paramEntry 201 }

audioGain3R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 3R"
    ::= { paramEntry 202 }

audioMute3R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 3R"
    ::= { paramEntry 203 }

audioInvert3R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 3R"
    ::= { paramEntry 204 }

audioMixDown3R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 3R"
    ::= { paramEntry 205 }

audioSilence3R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 3R"
    ::= { paramEntry 206 }

audioOverload3R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 3R"
    ::= { paramEntry 207 }

audioTestTone3R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 3R"
    ::= { paramEntry 208 }

audioGain4L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 4L"
    ::= { paramEntry 209 }

audioMute4L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 4L"
    ::= { paramEntry 210 }

audioInvert4L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 4L"
    ::= { paramEntry 211 }

audioMixDown4L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 4L"
    ::= { paramEntry 212 }

audioSilence4L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 4L"
    ::= { paramEntry 213 }

audioOverload4L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 4L"
    ::= { paramEntry 214 }

audioTestTone4L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 4L"
    ::= { paramEntry 215 }

audioGain4R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 4R"
    ::= { paramEntry 216 }

audioMute4R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 4R"
    ::= { paramEntry 217 }

audioInvert4R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 4R"
    ::= { paramEntry 218 }

audioMixDown4R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 4R"
    ::= { paramEntry 219 }

audioSilence4R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 4R"
    ::= { paramEntry 220 }

audioOverload4R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 4R"
    ::= { paramEntry 221 }

audioTestTone4R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 4R"
    ::= { paramEntry 222 }

audioGain5L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 5L"
    ::= { paramEntry 223 }

audioMute5L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 5L"
    ::= { paramEntry 224 }

audioInvert5L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 5L"
    ::= { paramEntry 225 }

audioMixDown5L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 5L"
    ::= { paramEntry 226 }

audioSilence5L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 5L"
    ::= { paramEntry 227 }

audioOverload5L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 5L"
    ::= { paramEntry 228 }

audioTestTone5L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 5L"
    ::= { paramEntry 229 }

audioGain5R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 5R"
    ::= { paramEntry 230 }

audioMute5R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 5R"
    ::= { paramEntry 231 }

audioInvert5R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 5R"
    ::= { paramEntry 232 }

audioMixDown5R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 5R"
    ::= { paramEntry 233 }

audioSilence5R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 5R"
    ::= { paramEntry 234 }

audioOverload5R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 5R"
    ::= { paramEntry 235 }

audioTestTone5R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 5R"
    ::= { paramEntry 236 }

audioGain6L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 6L"
    ::= { paramEntry 237 }

audioMute6L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 6L"
    ::= { paramEntry 238 }

audioInvert6L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 6L"
    ::= { paramEntry 239 }

audioMixDown6L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 6L"
    ::= { paramEntry 240 }

audioSilence6L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 6L"
    ::= { paramEntry 241 }

audioOverload6L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 6L"
    ::= { paramEntry 242 }

audioTestTone6L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 6L"
    ::= { paramEntry 243 }

audioGain6R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 6R"
    ::= { paramEntry 244 }

audioMute6R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 6R"
    ::= { paramEntry 245 }

audioInvert6R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 6R"
    ::= { paramEntry 246 }

audioMixDown6R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 6R"
    ::= { paramEntry 247 }

audioSilence6R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 6R"
    ::= { paramEntry 248 }

audioOverload6R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 6R"
    ::= { paramEntry 249 }

audioTestTone6R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 6R"
    ::= { paramEntry 250 }

audioGain7L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 7L"
    ::= { paramEntry 251 }

audioMute7L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 7L"
    ::= { paramEntry 252 }

audioInvert7L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 7L"
    ::= { paramEntry 253 }

audioMixDown7L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 7L"
    ::= { paramEntry 254 }

audioSilence7L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 7L"
    ::= { paramEntry 255 }

audioOverload7L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 7L"
    ::= { paramEntry 256 }

audioTestTone7L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 7L"
    ::= { paramEntry 257 }

audioGain7R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 7R"
    ::= { paramEntry 258 }

audioMute7R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 7R"
    ::= { paramEntry 259 }

audioInvert7R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 7R"
    ::= { paramEntry 260 }

audioMixDown7R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 7R"
    ::= { paramEntry 261 }

audioSilence7R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 7R"
    ::= { paramEntry 262 }

audioOverload7R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 7R"
    ::= { paramEntry 263 }

audioTestTone7R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 7R"
    ::= { paramEntry 264 }

audioGain8L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 8L"
    ::= { paramEntry 265 }

audioMute8L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 8L"
    ::= { paramEntry 266 }

audioInvert8L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 8L"
    ::= { paramEntry 267 }

audioMixDown8L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 8L"
    ::= { paramEntry 268 }

audioSilence8L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 8L"
    ::= { paramEntry 269 }

audioOverload8L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 8L"
    ::= { paramEntry 270 }

audioTestTone8L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 8L"
    ::= { paramEntry 271 }

audioGain8R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 8R"
    ::= { paramEntry 272 }

audioMute8R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 8R"
    ::= { paramEntry 273 }

audioInvert8R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 8R"
    ::= { paramEntry 274 }

audioMixDown8R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 8R"
    ::= { paramEntry 275 }

audioSilence8R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 8R"
    ::= { paramEntry 276 }

audioOverload8R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 8R"
    ::= { paramEntry 277 }

audioTestTone8R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 8R"
    ::= { paramEntry 278 }

audioGain9L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 9L"
    ::= { paramEntry 279 }

audioMute9L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 9L"
    ::= { paramEntry 280 }

audioInvert9L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 9L"
    ::= { paramEntry 281 }

audioMixDown9L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 9L"
    ::= { paramEntry 282 }

audioSilence9L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 9L"
    ::= { paramEntry 283 }

audioOverload9L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 9L"
    ::= { paramEntry 284 }

audioTestTone9L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 9L"
    ::= { paramEntry 285 }

audioGain9R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 9R"
    ::= { paramEntry 286 }

audioMute9R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 9R"
    ::= { paramEntry 287 }

audioInvert9R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 9R"
    ::= { paramEntry 288 }

audioMixDown9R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 9R"
    ::= { paramEntry 289 }

audioSilence9R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 9R"
    ::= { paramEntry 290 }

audioOverload9R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 9R"
    ::= { paramEntry 291 }

audioTestTone9R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 9R"
    ::= { paramEntry 292 }

audioGain10L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 10L"
    ::= { paramEntry 293 }

audioMute10L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 10L"
    ::= { paramEntry 294 }

audioInvert10L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 10L"
    ::= { paramEntry 295 }

audioMixDown10L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 10L"
    ::= { paramEntry 296 }

audioSilence10L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 10L"
    ::= { paramEntry 297 }

audioOverload10L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 10L"
    ::= { paramEntry 298 }

audioTestTone10L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 10L"
    ::= { paramEntry 299 }

audioGain10R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 10R"
    ::= { paramEntry 300 }

audioMute10R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 10R"
    ::= { paramEntry 301 }

audioInvert10R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 10R"
    ::= { paramEntry 302 }

audioMixDown10R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 10R"
    ::= { paramEntry 303 }

audioSilence10R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 10R"
    ::= { paramEntry 304 }

audioOverload10R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 10R"
    ::= { paramEntry 305 }

audioTestTone10R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 10R"
    ::= { paramEntry 306 }

audioPortAssignment1 OBJECT-TYPE
    SYNTAX TypeAudioPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment Audio Port 1 as input or output"
    ::= { paramEntry 307 }

audioPortAssignment2 OBJECT-TYPE
    SYNTAX TypeAudioPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment Audio Port 2 as input or output"
    ::= { paramEntry 308 }

eventPrimaryPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Primary Power missing"
    ::= { paramEntry 322 }

eventRedundantPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Redundant Power missing"
    ::= { paramEntry 323 }

eventFanFailureSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Fan Failure"
    ::= { paramEntry 324 }

eventSDIInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 1 No Input"
    ::= { paramEntry 325 }

eventAudioInput1LNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 1L No Input"
    ::= { paramEntry 326 }

eventAudioInput1RNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 1R No Input"
    ::= { paramEntry 327 }

eventAudioInput2LNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 2L No Input"
    ::= { paramEntry 328 }

eventAudioInput2RNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Input 2R No Input"
    ::= { paramEntry 329 }

eventEmbedderMissingInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Embedder Missing Input"
    ::= { paramEntry 330 }

eventAudioOutputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Audio Output No Input"
    ::= { paramEntry 331 }

crossBarAudioOutEmbAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Crossbar for Embedded Audio Out AES"
    ::= { paramEntry 332 }

crossBarAudioOutAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Crossbar for External Audio Out AES"
    ::= { paramEntry 333 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 334 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PDM5340 parameters"
    ::= { sw742 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PDM5340 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    backpanelStatus TypeBackpanelStatus,
    boardID Integer32,
    eventPrimaryPowermissing OnOffValue,
    eventRedundantPowermissing OnOffValue,
    eventFanFailure OnOffValue,
    eventSDIInput1NoInput OnOffValue,
    eventAudioInput1LNoInput OnOffValue,
    eventAudioInput1RNoInput OnOffValue,
    eventAudioInput2LNoInput OnOffValue,
    eventAudioInput2RNoInput OnOffValue,
    eventAudioInput3LNoInput OnOffValue,
    eventAudioInput3RNoInput OnOffValue,
    eventAudioInput4LNoInput OnOffValue,
    eventAudioInput4RNoInput OnOffValue,
    eventEmbedderMissingInput OnOffValue,
    eventAudioOutputNoInput OnOffValue,
    outStandard TypeOutStandard,
    inStandard TypeOutStandard,
    inAudioStatus11 TypeInAudioStatus11,
    inAudioStatus12 TypeInAudioStatus11,
    inAudioStatus21 TypeInAudioStatus11,
    inAudioStatus22 TypeInAudioStatus11,
    inGrp1 TypeInGrp1,
    inGrp2 TypeInGrp1,
    inGrp3 TypeInGrp1,
    inGrp4 TypeInGrp1,
    embedGroup1 OnOffValue,
    embedGroup2 OnOffValue,
    embedGroup3 OnOffValue,
    embedGroup4 OnOffValue,
    sourceEmbAESStereo112 TypeSourceEmbAESStereo112,
    sourceEmbAES11 TypeSourceEmbAES11,
    sourceEmbAES12 TypeSourceEmbAES11,
    sourceEmbAESStereo134 TypeSourceEmbAESStereo112,
    sourceEmbAES13 TypeSourceEmbAES11,
    sourceEmbAES14 TypeSourceEmbAES11,
    sourceEmbAESStereo212 TypeSourceEmbAESStereo112,
    sourceEmbAES21 TypeSourceEmbAES11,
    sourceEmbAES22 TypeSourceEmbAES11,
    sourceEmbAESStereo234 TypeSourceEmbAESStereo112,
    sourceEmbAES23 TypeSourceEmbAES11,
    sourceEmbAES24 TypeSourceEmbAES11,
    sourceEmbAESStereo312 TypeSourceEmbAESStereo112,
    sourceEmbAES31 TypeSourceEmbAES11,
    sourceEmbAES32 TypeSourceEmbAES11,
    sourceEmbAESStereo334 TypeSourceEmbAESStereo112,
    sourceEmbAES33 TypeSourceEmbAES11,
    sourceEmbAES34 TypeSourceEmbAES11,
    sourceEmbAESStereo412 TypeSourceEmbAESStereo112,
    sourceEmbAES41 TypeSourceEmbAES11,
    sourceEmbAES42 TypeSourceEmbAES11,
    sourceEmbAESStereo434 TypeSourceEmbAESStereo112,
    sourceEmbAES43 TypeSourceEmbAES11,
    sourceEmbAES44 TypeSourceEmbAES11,
    testToneFrequency TypeTestToneFrequency,
    hBlanking OnOffValue,
    vBlanking OnOffValue,
    deleteGroup1 TypeDeleteGroup1,
    deleteGroup2 TypeDeleteGroup1,
    deleteGroup3 TypeDeleteGroup1,
    deleteGroup4 TypeDeleteGroup1,
    embedBits1 TypeEmbedBits1,
    embedBits2 TypeEmbedBits1,
    embedBits3 TypeEmbedBits1,
    embedBits4 TypeEmbedBits1,
    fSLevelInput TypeFSLevelInput,
    fSLevelOutput TypeFSLevelInput,
    cSBTransSDTV OnOffValue,
    embedded11 TypeEmbedded11,
    embedded12 TypeEmbedded11,
    embedded13 TypeEmbedded11,
    embedded14 TypeEmbedded11,
    embedded21 TypeEmbedded11,
    embedded22 TypeEmbedded11,
    embedded23 TypeEmbedded11,
    embedded24 TypeEmbedded11,
    embedded31 TypeEmbedded11,
    embedded32 TypeEmbedded11,
    embedded33 TypeEmbedded11,
    embedded34 TypeEmbedded11,
    embedded41 TypeEmbedded11,
    embedded42 TypeEmbedded11,
    embedded43 TypeEmbedded11,
    embedded44 TypeEmbedded11,
    sourceAESOut11 TypeSourceAESOut11,
    sourceAESOut12 TypeSourceAESOut11,
    sourceAESOut21 TypeSourceAESOut11,
    sourceAESOut22 TypeSourceAESOut11,
    vFlag OnOffValue,
    deembPhaseSync OnOffValue,
    deembPhaseSyncVerify TypeDeembPhaseSyncVerify,
    audioContentSDI1 TypeAudioContentSDI1,
    audioContentSDI2 TypeAudioContentSDI1,
    audioContentSDI3 TypeAudioContentSDI1,
    audioContentSDI4 TypeAudioContentSDI1,
    audioContentSDI5 TypeAudioContentSDI1,
    audioContentSDI6 TypeAudioContentSDI1,
    audioContentSDI7 TypeAudioContentSDI1,
    audioContentSDI8 TypeAudioContentSDI1,
    audioContentStatusSDI1 TypeAudioContentStatusSDI1,
    audioContentStatusSDI2 TypeAudioContentStatusSDI1,
    audioContentStatusSDI3 TypeAudioContentStatusSDI1,
    audioContentStatusSDI4 TypeAudioContentStatusSDI1,
    audioContentStatusSDI5 TypeAudioContentStatusSDI1,
    audioContentStatusSDI6 TypeAudioContentStatusSDI1,
    audioContentStatusSDI7 TypeAudioContentStatusSDI1,
    audioContentStatusSDI8 TypeAudioContentStatusSDI1,
    audioContentAES1 TypeAudioContentSDI1,
    audioContentAES2 TypeAudioContentSDI1,
    audioContentStatusAES1 TypeAudioContentStatusSDI1,
    audioContentStatusAES2 TypeAudioContentStatusSDI1,
    audioGain1L FixedPointValue1,
    audioMute1L TypeAudioMute1L,
    audioInvert1L TypeAudioInvert1L,
    audioMixDown1L OnOffValue,
    audioSilence1L TypeAudioSilence1L,
    audioOverload1L TypeAudioOverload1L,
    audioTestTone1L OnOffValue,
    audioGain1R FixedPointValue1,
    audioMute1R TypeAudioMute1L,
    audioInvert1R TypeAudioInvert1L,
    audioMixDown1R OnOffValue,
    audioSilence1R TypeAudioSilence1L,
    audioOverload1R TypeAudioOverload1L,
    audioTestTone1R OnOffValue,
    audioGain2L FixedPointValue1,
    audioMute2L TypeAudioMute1L,
    audioInvert2L TypeAudioInvert1L,
    audioMixDown2L OnOffValue,
    audioSilence2L TypeAudioSilence1L,
    audioOverload2L TypeAudioOverload1L,
    audioTestTone2L OnOffValue,
    audioGain2R FixedPointValue1,
    audioMute2R TypeAudioMute1L,
    audioInvert2R TypeAudioInvert1L,
    audioMixDown2R OnOffValue,
    audioSilence2R TypeAudioSilence1L,
    audioOverload2R TypeAudioOverload1L,
    audioTestTone2R OnOffValue,
    audioGain3L FixedPointValue1,
    audioMute3L TypeAudioMute1L,
    audioInvert3L TypeAudioInvert1L,
    audioMixDown3L OnOffValue,
    audioSilence3L TypeAudioSilence1L,
    audioOverload3L TypeAudioOverload1L,
    audioTestTone3L OnOffValue,
    audioGain3R FixedPointValue1,
    audioMute3R TypeAudioMute1L,
    audioInvert3R TypeAudioInvert1L,
    audioMixDown3R OnOffValue,
    audioSilence3R TypeAudioSilence1L,
    audioOverload3R TypeAudioOverload1L,
    audioTestTone3R OnOffValue,
    audioGain4L FixedPointValue1,
    audioMute4L TypeAudioMute1L,
    audioInvert4L TypeAudioInvert1L,
    audioMixDown4L OnOffValue,
    audioSilence4L TypeAudioSilence1L,
    audioOverload4L TypeAudioOverload1L,
    audioTestTone4L OnOffValue,
    audioGain4R FixedPointValue1,
    audioMute4R TypeAudioMute1L,
    audioInvert4R TypeAudioInvert1L,
    audioMixDown4R OnOffValue,
    audioSilence4R TypeAudioSilence1L,
    audioOverload4R TypeAudioOverload1L,
    audioTestTone4R OnOffValue,
    audioGain5L FixedPointValue1,
    audioMute5L TypeAudioMute1L,
    audioInvert5L TypeAudioInvert1L,
    audioMixDown5L OnOffValue,
    audioSilence5L TypeAudioSilence1L,
    audioOverload5L TypeAudioOverload1L,
    audioTestTone5L OnOffValue,
    audioGain5R FixedPointValue1,
    audioMute5R TypeAudioMute1L,
    audioInvert5R TypeAudioInvert1L,
    audioMixDown5R OnOffValue,
    audioSilence5R TypeAudioSilence1L,
    audioOverload5R TypeAudioOverload1L,
    audioTestTone5R OnOffValue,
    audioGain6L FixedPointValue1,
    audioMute6L TypeAudioMute1L,
    audioInvert6L TypeAudioInvert1L,
    audioMixDown6L OnOffValue,
    audioSilence6L TypeAudioSilence1L,
    audioOverload6L TypeAudioOverload1L,
    audioTestTone6L OnOffValue,
    audioGain6R FixedPointValue1,
    audioMute6R TypeAudioMute1L,
    audioInvert6R TypeAudioInvert1L,
    audioMixDown6R OnOffValue,
    audioSilence6R TypeAudioSilence1L,
    audioOverload6R TypeAudioOverload1L,
    audioTestTone6R OnOffValue,
    audioGain7L FixedPointValue1,
    audioMute7L TypeAudioMute1L,
    audioInvert7L TypeAudioInvert1L,
    audioMixDown7L OnOffValue,
    audioSilence7L TypeAudioSilence1L,
    audioOverload7L TypeAudioOverload1L,
    audioTestTone7L OnOffValue,
    audioGain7R FixedPointValue1,
    audioMute7R TypeAudioMute1L,
    audioInvert7R TypeAudioInvert1L,
    audioMixDown7R OnOffValue,
    audioSilence7R TypeAudioSilence1L,
    audioOverload7R TypeAudioOverload1L,
    audioTestTone7R OnOffValue,
    audioGain8L FixedPointValue1,
    audioMute8L TypeAudioMute1L,
    audioInvert8L TypeAudioInvert1L,
    audioMixDown8L OnOffValue,
    audioSilence8L TypeAudioSilence1L,
    audioOverload8L TypeAudioOverload1L,
    audioTestTone8L OnOffValue,
    audioGain8R FixedPointValue1,
    audioMute8R TypeAudioMute1L,
    audioInvert8R TypeAudioInvert1L,
    audioMixDown8R OnOffValue,
    audioSilence8R TypeAudioSilence1L,
    audioOverload8R TypeAudioOverload1L,
    audioTestTone8R OnOffValue,
    audioGain9L FixedPointValue1,
    audioMute9L TypeAudioMute1L,
    audioInvert9L TypeAudioInvert1L,
    audioMixDown9L OnOffValue,
    audioSilence9L TypeAudioSilence1L,
    audioOverload9L TypeAudioOverload1L,
    audioTestTone9L OnOffValue,
    audioGain9R FixedPointValue1,
    audioMute9R TypeAudioMute1L,
    audioInvert9R TypeAudioInvert1L,
    audioMixDown9R OnOffValue,
    audioSilence9R TypeAudioSilence1L,
    audioOverload9R TypeAudioOverload1L,
    audioTestTone9R OnOffValue,
    audioGain10L FixedPointValue1,
    audioMute10L TypeAudioMute1L,
    audioInvert10L TypeAudioInvert1L,
    audioMixDown10L OnOffValue,
    audioSilence10L TypeAudioSilence1L,
    audioOverload10L TypeAudioOverload1L,
    audioTestTone10L OnOffValue,
    audioGain10R FixedPointValue1,
    audioMute10R TypeAudioMute1L,
    audioInvert10R TypeAudioInvert1L,
    audioMixDown10R OnOffValue,
    audioSilence10R TypeAudioSilence1L,
    audioOverload10R TypeAudioOverload1L,
    audioTestTone10R OnOffValue,
    audioPortAssignment1 TypeAudioPortAssignment1,
    audioPortAssignment2 TypeAudioPortAssignment1,
    eventPrimaryPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventRedundantPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventFanFailureSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput1NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAudioInput1LNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAudioInput1RNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAudioInput2LNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAudioInput2RNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventEmbedderMissingInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAudioOutputNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    crossBarAudioOutEmbAES DisplayString,
    crossBarAudioOutAES DisplayString,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PDM5340"
    ::= { sw742 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        backpanelStatus,
        boardID,
        eventPrimaryPowermissing,
        eventRedundantPowermissing,
        eventFanFailure,
        eventSDIInput1NoInput,
        eventAudioInput1LNoInput,
        eventAudioInput1RNoInput,
        eventAudioInput2LNoInput,
        eventAudioInput2RNoInput,
        eventAudioInput3LNoInput,
        eventAudioInput3RNoInput,
        eventAudioInput4LNoInput,
        eventAudioInput4RNoInput,
        eventEmbedderMissingInput,
        eventAudioOutputNoInput,
        outStandard,
        inStandard,
        inAudioStatus11,
        inAudioStatus12,
        inAudioStatus21,
        inAudioStatus22,
        inGrp1,
        inGrp2,
        inGrp3,
        inGrp4,
        embedGroup1,
        embedGroup2,
        embedGroup3,
        embedGroup4,
        sourceEmbAESStereo112,
        sourceEmbAES11,
        sourceEmbAES12,
        sourceEmbAESStereo134,
        sourceEmbAES13,
        sourceEmbAES14,
        sourceEmbAESStereo212,
        sourceEmbAES21,
        sourceEmbAES22,
        sourceEmbAESStereo234,
        sourceEmbAES23,
        sourceEmbAES24,
        sourceEmbAESStereo312,
        sourceEmbAES31,
        sourceEmbAES32,
        sourceEmbAESStereo334,
        sourceEmbAES33,
        sourceEmbAES34,
        sourceEmbAESStereo412,
        sourceEmbAES41,
        sourceEmbAES42,
        sourceEmbAESStereo434,
        sourceEmbAES43,
        sourceEmbAES44,
        testToneFrequency,
        hBlanking,
        vBlanking,
        deleteGroup1,
        deleteGroup2,
        deleteGroup3,
        deleteGroup4,
        embedBits1,
        embedBits2,
        embedBits3,
        embedBits4,
        fSLevelInput,
        fSLevelOutput,
        cSBTransSDTV,
        embedded11,
        embedded12,
        embedded13,
        embedded14,
        embedded21,
        embedded22,
        embedded23,
        embedded24,
        embedded31,
        embedded32,
        embedded33,
        embedded34,
        embedded41,
        embedded42,
        embedded43,
        embedded44,
        sourceAESOut11,
        sourceAESOut12,
        sourceAESOut21,
        sourceAESOut22,
        vFlag,
        deembPhaseSync,
        deembPhaseSyncVerify,
        audioContentSDI1,
        audioContentSDI2,
        audioContentSDI3,
        audioContentSDI4,
        audioContentSDI5,
        audioContentSDI6,
        audioContentSDI7,
        audioContentSDI8,
        audioContentStatusSDI1,
        audioContentStatusSDI2,
        audioContentStatusSDI3,
        audioContentStatusSDI4,
        audioContentStatusSDI5,
        audioContentStatusSDI6,
        audioContentStatusSDI7,
        audioContentStatusSDI8,
        audioContentAES1,
        audioContentAES2,
        audioContentStatusAES1,
        audioContentStatusAES2,
        audioGain1L,
        audioMute1L,
        audioInvert1L,
        audioMixDown1L,
        audioSilence1L,
        audioOverload1L,
        audioTestTone1L,
        audioGain1R,
        audioMute1R,
        audioInvert1R,
        audioMixDown1R,
        audioSilence1R,
        audioOverload1R,
        audioTestTone1R,
        audioGain2L,
        audioMute2L,
        audioInvert2L,
        audioMixDown2L,
        audioSilence2L,
        audioOverload2L,
        audioTestTone2L,
        audioGain2R,
        audioMute2R,
        audioInvert2R,
        audioMixDown2R,
        audioSilence2R,
        audioOverload2R,
        audioTestTone2R,
        audioGain3L,
        audioMute3L,
        audioInvert3L,
        audioMixDown3L,
        audioSilence3L,
        audioOverload3L,
        audioTestTone3L,
        audioGain3R,
        audioMute3R,
        audioInvert3R,
        audioMixDown3R,
        audioSilence3R,
        audioOverload3R,
        audioTestTone3R,
        audioGain4L,
        audioMute4L,
        audioInvert4L,
        audioMixDown4L,
        audioSilence4L,
        audioOverload4L,
        audioTestTone4L,
        audioGain4R,
        audioMute4R,
        audioInvert4R,
        audioMixDown4R,
        audioSilence4R,
        audioOverload4R,
        audioTestTone4R,
        audioGain5L,
        audioMute5L,
        audioInvert5L,
        audioMixDown5L,
        audioSilence5L,
        audioOverload5L,
        audioTestTone5L,
        audioGain5R,
        audioMute5R,
        audioInvert5R,
        audioMixDown5R,
        audioSilence5R,
        audioOverload5R,
        audioTestTone5R,
        audioGain6L,
        audioMute6L,
        audioInvert6L,
        audioMixDown6L,
        audioSilence6L,
        audioOverload6L,
        audioTestTone6L,
        audioGain6R,
        audioMute6R,
        audioInvert6R,
        audioMixDown6R,
        audioSilence6R,
        audioOverload6R,
        audioTestTone6R,
        audioGain7L,
        audioMute7L,
        audioInvert7L,
        audioMixDown7L,
        audioSilence7L,
        audioOverload7L,
        audioTestTone7L,
        audioGain7R,
        audioMute7R,
        audioInvert7R,
        audioMixDown7R,
        audioSilence7R,
        audioOverload7R,
        audioTestTone7R,
        audioGain8L,
        audioMute8L,
        audioInvert8L,
        audioMixDown8L,
        audioSilence8L,
        audioOverload8L,
        audioTestTone8L,
        audioGain8R,
        audioMute8R,
        audioInvert8R,
        audioMixDown8R,
        audioSilence8R,
        audioOverload8R,
        audioTestTone8R,
        audioGain9L,
        audioMute9L,
        audioInvert9L,
        audioMixDown9L,
        audioSilence9L,
        audioOverload9L,
        audioTestTone9L,
        audioGain9R,
        audioMute9R,
        audioInvert9R,
        audioMixDown9R,
        audioSilence9R,
        audioOverload9R,
        audioTestTone9R,
        audioGain10L,
        audioMute10L,
        audioInvert10L,
        audioMixDown10L,
        audioSilence10L,
        audioOverload10L,
        audioTestTone10L,
        audioGain10R,
        audioMute10R,
        audioInvert10R,
        audioMixDown10R,
        audioSilence10R,
        audioOverload10R,
        audioTestTone10R,
        audioPortAssignment1,
        audioPortAssignment2,
        eventPrimaryPowermissingSNMP,
        eventRedundantPowermissingSNMP,
        eventFanFailureSNMP,
        eventSDIInput1NoInputSNMP,
        eventAudioInput1LNoInputSNMP,
        eventAudioInput1RNoInputSNMP,
        eventAudioInput2LNoInputSNMP,
        eventAudioInput2RNoInputSNMP,
        eventEmbedderMissingInputSNMP,
        eventAudioOutputNoInputSNMP,
        crossBarAudioOutEmbAES,
        crossBarAudioOutAES,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END