-- Machine generated MIB file, do not edit!
--
-- MIB file for PDX5262-B-D, type code 10.C1, software label 203
-- Generated on Tuesday, 09-Aug-16 15:05:48 UTC
-- CVS $Id: PDX5262-B-D_10c1_sw203.mib,v 1.12 2016/08/09 15:05:50 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PDX5262-B-D-10c1-sw203-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pdx5262-b-d-10c1-sw203 MODULE-IDENTITY
    LAST-UPDATED "201608091505Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PDX5262-B-D, type code 10.C1, software label 203"
    REVISION "201608091505Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 4289203 }

pdx5262-b-d-10c1 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PDX5262-B-D"
    ::= { products 4289 }

sw203 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 203"
    ::= { pdx5262-b-d-10c1 203 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeInStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n1080i60(7),
        n1080i5994(8),
        n1080i50(9)
    }

TypeRefPLL2700Lock ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0(0),
        n1(1)
    }

TypeEmbedded11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        present(0),
        notEmbedded(1)
    }

TypeSourceAESOut11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        intAES11(0),
        intAES12(1),
        intAES13(2),
        intAES14(3),
        intAES21(4),
        intAES22(5),
        intAES23(6),
        intAES24(7),
        intAES31(8),
        intAES32(9),
        intAES33(10),
        intAES34(11),
        intAES41(12),
        intAES42(13),
        intAES43(14),
        intAES44(15)
    }

TypeAutoTestPattern ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        fullFieldBlack(1)
    }

TypeEventAESOutput1SignalincompleteSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventAESOutput1Signalincomplete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 1 Signal incomplete"
    ::= { paramEntry 14 }

eventAESOutput2Signalincomplete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 2 Signal incomplete"
    ::= { paramEntry 15 }

eventAESOutput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 1 No Input"
    ::= { paramEntry 16 }

eventAESOutput2NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 2 No Input"
    ::= { paramEntry 17 }

eventSDIInputinvaliddata OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input invalid data"
    ::= { paramEntry 18 }

eventSDIInputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: SDI Input No Input"
    ::= { paramEntry 19 }

eventHighTemperature OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: High Temperature"
    ::= { paramEntry 20 }

eventSDIOutputAutoTestsignal OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Output Auto-Testsignal"
    ::= { paramEntry 21 }

inStandard OBJECT-TYPE
    SYNTAX TypeInStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input status indication"
    ::= { paramEntry 22 }

outStandard OBJECT-TYPE
    SYNTAX TypeInStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI output"
    ::= { paramEntry 23 }

refPLL2700Lock OBJECT-TYPE
    SYNTAX TypeRefPLL2700Lock
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Lock-Status of Reference PLL 27 MHz (1 or 0)"
    ::= { paramEntry 25 }

refPLL74xLock OBJECT-TYPE
    SYNTAX TypeRefPLL2700Lock
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Lock-Status of Reference PLL 74,x MHz (1 or 0)"
    ::= { paramEntry 26 }

embedded11 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 1"
    ::= { paramEntry 28 }

embedded12 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 2"
    ::= { paramEntry 29 }

embedded13 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 3"
    ::= { paramEntry 30 }

embedded14 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 4"
    ::= { paramEntry 31 }

embedded21 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 1"
    ::= { paramEntry 32 }

embedded22 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 2"
    ::= { paramEntry 33 }

embedded23 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 3"
    ::= { paramEntry 34 }

embedded24 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 4"
    ::= { paramEntry 35 }

embedded31 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 1"
    ::= { paramEntry 36 }

embedded32 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 2"
    ::= { paramEntry 37 }

embedded33 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 3"
    ::= { paramEntry 38 }

embedded34 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 4"
    ::= { paramEntry 39 }

embedded41 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 1"
    ::= { paramEntry 40 }

embedded42 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 2"
    ::= { paramEntry 41 }

embedded43 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 3"
    ::= { paramEntry 42 }

embedded44 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 4"
    ::= { paramEntry 43 }

sourceAESOut11 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.1"
    ::= { paramEntry 44 }

sourceAESOut12 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.2"
    ::= { paramEntry 45 }

sourceAESOut21 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.1"
    ::= { paramEntry 47 }

sourceAESOut22 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.2"
    ::= { paramEntry 48 }

autoTestPattern OBJECT-TYPE
    SYNTAX TypeAutoTestPattern
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select if a testpattern(Black) shall be shown at the output when there is no current input"
    ::= { paramEntry 50 }

temperatureMAX1617Int OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PCB temperature (MAX1617) in C"
    ::= { paramEntry 54 }

temperatureMAX1617Ext OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "FPGA temperature in C"
    ::= { paramEntry 55 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 56 }

eventAESOutput1SignalincompleteSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 1 Signal incomplete"
    ::= { paramEntry 57 }

eventAESOutput2SignalincompleteSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 2 Signal incomplete"
    ::= { paramEntry 58 }

eventAESOutput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 1 No Input"
    ::= { paramEntry 59 }

eventAESOutput2NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 2 No Input"
    ::= { paramEntry 60 }

eventSDIInputinvaliddataSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input invalid data"
    ::= { paramEntry 61 }

eventSDIInputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input No Input"
    ::= { paramEntry 62 }

eventHighTemperatureSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: High Temperature"
    ::= { paramEntry 63 }

eventSDIOutputAutoTestsignalSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Output Auto-Testsignal"
    ::= { paramEntry 64 }

crossBarAudioOutAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Crossbar for External Audio Out AES"
    ::= { paramEntry 65 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 66 }

event525videoinput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 525 video input (525 video input)"
    ::= { paramEntry 67 }

event169videoinput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 169 video input (16:9 video input)"
    ::= { paramEntry 68 }

event525videoinputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 525 video input (525 video input)"
    ::= { paramEntry 69 }

event169videoinputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 169 video input (16:9 video input)"
    ::= { paramEntry 70 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PDX5262-B-D parameters"
    ::= { sw203 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PDX5262-B-D parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventAESOutput1Signalincomplete OnOffValue,
    eventAESOutput2Signalincomplete OnOffValue,
    eventAESOutput1NoInput OnOffValue,
    eventAESOutput2NoInput OnOffValue,
    eventSDIInputinvaliddata OnOffValue,
    eventSDIInputNoInput OnOffValue,
    eventHighTemperature OnOffValue,
    eventSDIOutputAutoTestsignal OnOffValue,
    inStandard TypeInStandard,
    outStandard TypeInStandard,
    refPLL2700Lock TypeRefPLL2700Lock,
    refPLL74xLock TypeRefPLL2700Lock,
    embedded11 TypeEmbedded11,
    embedded12 TypeEmbedded11,
    embedded13 TypeEmbedded11,
    embedded14 TypeEmbedded11,
    embedded21 TypeEmbedded11,
    embedded22 TypeEmbedded11,
    embedded23 TypeEmbedded11,
    embedded24 TypeEmbedded11,
    embedded31 TypeEmbedded11,
    embedded32 TypeEmbedded11,
    embedded33 TypeEmbedded11,
    embedded34 TypeEmbedded11,
    embedded41 TypeEmbedded11,
    embedded42 TypeEmbedded11,
    embedded43 TypeEmbedded11,
    embedded44 TypeEmbedded11,
    sourceAESOut11 TypeSourceAESOut11,
    sourceAESOut12 TypeSourceAESOut11,
    sourceAESOut21 TypeSourceAESOut11,
    sourceAESOut22 TypeSourceAESOut11,
    autoTestPattern TypeAutoTestPattern,
    temperatureMAX1617Int Integer32,
    temperatureMAX1617Ext Integer32,
    boardID Integer32,
    eventAESOutput1SignalincompleteSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput2SignalincompleteSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput1NoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput2NoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventSDIInputinvaliddataSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventSDIInputNoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventHighTemperatureSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventSDIOutputAutoTestsignalSNMP TypeEventAESOutput1SignalincompleteSNMP,
    crossBarAudioOutAES DisplayString,
    sNumber DisplayString,
    event525videoinput OnOffValue,
    event169videoinput OnOffValue,
    event525videoinputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    event169videoinputSNMP TypeEventAESOutput1SignalincompleteSNMP }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PDX5262-B-D"
    ::= { sw203 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventAESOutput1Signalincomplete,
        eventAESOutput2Signalincomplete,
        eventAESOutput1NoInput,
        eventAESOutput2NoInput,
        eventSDIInputinvaliddata,
        eventSDIInputNoInput,
        eventHighTemperature,
        eventSDIOutputAutoTestsignal,
        inStandard,
        outStandard,
        refPLL2700Lock,
        refPLL74xLock,
        embedded11,
        embedded12,
        embedded13,
        embedded14,
        embedded21,
        embedded22,
        embedded23,
        embedded24,
        embedded31,
        embedded32,
        embedded33,
        embedded34,
        embedded41,
        embedded42,
        embedded43,
        embedded44,
        sourceAESOut11,
        sourceAESOut12,
        sourceAESOut21,
        sourceAESOut22,
        autoTestPattern,
        temperatureMAX1617Int,
        temperatureMAX1617Ext,
        boardID,
        eventAESOutput1SignalincompleteSNMP,
        eventAESOutput2SignalincompleteSNMP,
        eventAESOutput1NoInputSNMP,
        eventAESOutput2NoInputSNMP,
        eventSDIInputinvaliddataSNMP,
        eventSDIInputNoInputSNMP,
        eventHighTemperatureSNMP,
        eventSDIOutputAutoTestsignalSNMP,
        crossBarAudioOutAES,
        sNumber,
        event525videoinput,
        event169videoinput,
        event525videoinputSNMP,
        event169videoinputSNMP }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END