-- Machine generated MIB file, do not edit!
--
-- MIB file for PDX5268-B-D-OG, type code 10.C3, software label 411
-- Generated on Tuesday, 09-Aug-16 15:08:22 UTC
-- CVS $Id: PDX5268-B-D-OG_10c3_sw411.mib,v 1.12 2016/08/09 15:08:24 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PDX5268-B-D-OG-10c3-sw411-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pdx5268-b-d-og-10c3-sw411 MODULE-IDENTITY
    LAST-UPDATED "201608091508Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PDX5268-B-D-OG, type code 10.C3, software label 411"
    REVISION "201608091508Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 4291411 }

pdx5268-b-d-og-10c3 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PDX5268-B-D-OG"
    ::= { products 4291 }

sw411 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 411"
    ::= { pdx5268-b-d-og-10c3 411 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeInStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27)
    }

TypeRefPLL2700Lock ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0(0),
        n1(1)
    }

TypeEmbedded11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        present(0),
        notEmbedded(1)
    }

TypeSourceAESOut11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        intAES11(0),
        intAES12(1),
        intAES13(2),
        intAES14(3),
        intAES21(4),
        intAES22(5),
        intAES23(6),
        intAES24(7),
        intAES31(8),
        intAES32(9),
        intAES33(10),
        intAES34(11),
        intAES41(12),
        intAES42(13),
        intAES43(14),
        intAES44(15)
    }

TypeAutoTestPattern ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        fullFieldBlack(1)
    }

TypeDeembPhaseSyncVerify ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeEventAESOutput1SignalincompleteSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventAESOutput1Signalincomplete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 1 Signal incomplete"
    ::= { paramEntry 14 }

eventAESOutput2Signalincomplete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 2 Signal incomplete"
    ::= { paramEntry 15 }

eventAESOutput3Signalincomplete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 3 Signal incomplete"
    ::= { paramEntry 16 }

eventAESOutput4Signalincomplete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 4 Signal incomplete"
    ::= { paramEntry 17 }

eventAESOutput5Signalincomplete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 5 Signal incomplete"
    ::= { paramEntry 18 }

eventAESOutput6Signalincomplete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 6 Signal incomplete"
    ::= { paramEntry 19 }

eventAESOutput7Signalincomplete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 7 Signal incomplete"
    ::= { paramEntry 20 }

eventAESOutput8Signalincomplete OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 8 Signal incomplete"
    ::= { paramEntry 21 }

eventAESOutput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 1 No Input"
    ::= { paramEntry 22 }

eventAESOutput2NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 2 No Input"
    ::= { paramEntry 23 }

eventAESOutput3NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 3 No Input"
    ::= { paramEntry 24 }

eventAESOutput4NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 4 No Input"
    ::= { paramEntry 25 }

eventAESOutput5NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 5 No Input"
    ::= { paramEntry 26 }

eventAESOutput6NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 6 No Input"
    ::= { paramEntry 27 }

eventAESOutput7NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 7 No Input"
    ::= { paramEntry 28 }

eventAESOutput8NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Output 8 No Input"
    ::= { paramEntry 29 }

eventSDIInputinvaliddata OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input invalid data"
    ::= { paramEntry 30 }

eventSDIInputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: SDI Input No Input"
    ::= { paramEntry 31 }

eventHighTemperature OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: High Temperature"
    ::= { paramEntry 32 }

eventSDIOutputAutoTestsignal OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Output Auto-Testsignal"
    ::= { paramEntry 33 }

inStandard OBJECT-TYPE
    SYNTAX TypeInStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input status indication"
    ::= { paramEntry 34 }

outStandard OBJECT-TYPE
    SYNTAX TypeInStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI output"
    ::= { paramEntry 35 }

refPLL2700Lock OBJECT-TYPE
    SYNTAX TypeRefPLL2700Lock
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Lock-Status of Reference PLL 27 MHz (1 or 0)"
    ::= { paramEntry 37 }

refPLL74xLock OBJECT-TYPE
    SYNTAX TypeRefPLL2700Lock
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Lock-Status of Reference PLL 74,x MHz (1 or 0)"
    ::= { paramEntry 38 }

fastGenlock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable fast genlock operation mode. If enabled, the SDI and audio outputs will be active much faster after a disturbance / reconnection of the SDI input.
However, in this mode the SDI processing time (SDI In -> SDI Out) is not 100% fixed. It can take on a value between ~1/2 and max. 1 line, depending on video standard."
    ::= { paramEntry 39 }

embedded11 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 1"
    ::= { paramEntry 40 }

embedded12 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 2"
    ::= { paramEntry 41 }

embedded13 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 3"
    ::= { paramEntry 42 }

embedded14 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 4"
    ::= { paramEntry 43 }

embedded21 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 1"
    ::= { paramEntry 44 }

embedded22 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 2"
    ::= { paramEntry 45 }

embedded23 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 3"
    ::= { paramEntry 46 }

embedded24 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 4"
    ::= { paramEntry 47 }

embedded31 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 1"
    ::= { paramEntry 48 }

embedded32 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 2"
    ::= { paramEntry 49 }

embedded33 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 3"
    ::= { paramEntry 50 }

embedded34 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 4"
    ::= { paramEntry 51 }

embedded41 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 1"
    ::= { paramEntry 52 }

embedded42 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 2"
    ::= { paramEntry 53 }

embedded43 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 3"
    ::= { paramEntry 54 }

embedded44 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 4"
    ::= { paramEntry 55 }

sourceAESOut11 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.1"
    ::= { paramEntry 56 }

sourceAESOut12 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.2"
    ::= { paramEntry 57 }

sourceAESOut21 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.1"
    ::= { paramEntry 59 }

sourceAESOut22 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.2"
    ::= { paramEntry 60 }

sourceAESOut31 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 3.1"
    ::= { paramEntry 62 }

sourceAESOut32 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 3.2"
    ::= { paramEntry 63 }

sourceAESOut41 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 4.1"
    ::= { paramEntry 65 }

sourceAESOut42 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 4.2"
    ::= { paramEntry 66 }

sourceAESOut51 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 5.1"
    ::= { paramEntry 68 }

sourceAESOut52 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 5.2"
    ::= { paramEntry 69 }

sourceAESOut61 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 6.1"
    ::= { paramEntry 71 }

sourceAESOut62 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 6.2"
    ::= { paramEntry 72 }

sourceAESOut71 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 7.1"
    ::= { paramEntry 74 }

sourceAESOut72 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 7.2"
    ::= { paramEntry 75 }

sourceAESOut81 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 8.1"
    ::= { paramEntry 77 }

sourceAESOut82 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 8.2"
    ::= { paramEntry 78 }

autoTestPattern OBJECT-TYPE
    SYNTAX TypeAutoTestPattern
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select if a testpattern(Black) shall be shown at the output when there is no current input"
    ::= { paramEntry 80 }

vFlag OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Activate Valid Audio Flag when missing audio on AES Inputs"
    ::= { paramEntry 81 }

deembPhaseSync OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
 All running channels are reset if one channel is added/removed.(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)

If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
    ::= { paramEntry 82 }

deembPhaseSyncVerify OBJECT-TYPE
    SYNTAX TypeDeembPhaseSyncVerify
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
    ::= { paramEntry 83 }

temperatureMAX1617Int OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PCB temperature (MAX1617) in C"
    ::= { paramEntry 84 }

temperatureMAX1617Ext OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "FPGA temperature in C"
    ::= { paramEntry 85 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 86 }

eventAESOutput1SignalincompleteSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 1 Signal incomplete"
    ::= { paramEntry 87 }

eventAESOutput2SignalincompleteSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 2 Signal incomplete"
    ::= { paramEntry 88 }

eventAESOutput3SignalincompleteSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 3 Signal incomplete"
    ::= { paramEntry 89 }

eventAESOutput4SignalincompleteSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 4 Signal incomplete"
    ::= { paramEntry 90 }

eventAESOutput5SignalincompleteSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 5 Signal incomplete"
    ::= { paramEntry 91 }

eventAESOutput6SignalincompleteSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 6 Signal incomplete"
    ::= { paramEntry 92 }

eventAESOutput7SignalincompleteSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 7 Signal incomplete"
    ::= { paramEntry 93 }

eventAESOutput8SignalincompleteSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 8 Signal incomplete"
    ::= { paramEntry 94 }

eventAESOutput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 1 No Input"
    ::= { paramEntry 95 }

eventAESOutput2NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 2 No Input"
    ::= { paramEntry 96 }

eventAESOutput3NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 3 No Input"
    ::= { paramEntry 97 }

eventAESOutput4NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 4 No Input"
    ::= { paramEntry 98 }

eventAESOutput5NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 5 No Input"
    ::= { paramEntry 99 }

eventAESOutput6NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 6 No Input"
    ::= { paramEntry 100 }

eventAESOutput7NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 7 No Input"
    ::= { paramEntry 101 }

eventAESOutput8NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output 8 No Input"
    ::= { paramEntry 102 }

eventSDIInputinvaliddataSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input invalid data"
    ::= { paramEntry 103 }

eventSDIInputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input No Input"
    ::= { paramEntry 104 }

eventHighTemperatureSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: High Temperature"
    ::= { paramEntry 105 }

eventSDIOutputAutoTestsignalSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Output Auto-Testsignal"
    ::= { paramEntry 106 }

crossBarAudioOutAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Crossbar for External Audio Out AES"
    ::= { paramEntry 107 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 108 }

event525videoinput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 525 video input (525 video input)"
    ::= { paramEntry 109 }

event169videoinput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 169 video input (16:9 video input)"
    ::= { paramEntry 110 }

event525videoinputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 525 video input (525 video input)"
    ::= { paramEntry 111 }

event169videoinputSNMP OBJECT-TYPE
    SYNTAX TypeEventAESOutput1SignalincompleteSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 169 video input (16:9 video input)"
    ::= { paramEntry 112 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PDX5268-B-D-OG parameters"
    ::= { sw411 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PDX5268-B-D-OG parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventAESOutput1Signalincomplete OnOffValue,
    eventAESOutput2Signalincomplete OnOffValue,
    eventAESOutput3Signalincomplete OnOffValue,
    eventAESOutput4Signalincomplete OnOffValue,
    eventAESOutput5Signalincomplete OnOffValue,
    eventAESOutput6Signalincomplete OnOffValue,
    eventAESOutput7Signalincomplete OnOffValue,
    eventAESOutput8Signalincomplete OnOffValue,
    eventAESOutput1NoInput OnOffValue,
    eventAESOutput2NoInput OnOffValue,
    eventAESOutput3NoInput OnOffValue,
    eventAESOutput4NoInput OnOffValue,
    eventAESOutput5NoInput OnOffValue,
    eventAESOutput6NoInput OnOffValue,
    eventAESOutput7NoInput OnOffValue,
    eventAESOutput8NoInput OnOffValue,
    eventSDIInputinvaliddata OnOffValue,
    eventSDIInputNoInput OnOffValue,
    eventHighTemperature OnOffValue,
    eventSDIOutputAutoTestsignal OnOffValue,
    inStandard TypeInStandard,
    outStandard TypeInStandard,
    refPLL2700Lock TypeRefPLL2700Lock,
    refPLL74xLock TypeRefPLL2700Lock,
    fastGenlock OnOffValue,
    embedded11 TypeEmbedded11,
    embedded12 TypeEmbedded11,
    embedded13 TypeEmbedded11,
    embedded14 TypeEmbedded11,
    embedded21 TypeEmbedded11,
    embedded22 TypeEmbedded11,
    embedded23 TypeEmbedded11,
    embedded24 TypeEmbedded11,
    embedded31 TypeEmbedded11,
    embedded32 TypeEmbedded11,
    embedded33 TypeEmbedded11,
    embedded34 TypeEmbedded11,
    embedded41 TypeEmbedded11,
    embedded42 TypeEmbedded11,
    embedded43 TypeEmbedded11,
    embedded44 TypeEmbedded11,
    sourceAESOut11 TypeSourceAESOut11,
    sourceAESOut12 TypeSourceAESOut11,
    sourceAESOut21 TypeSourceAESOut11,
    sourceAESOut22 TypeSourceAESOut11,
    sourceAESOut31 TypeSourceAESOut11,
    sourceAESOut32 TypeSourceAESOut11,
    sourceAESOut41 TypeSourceAESOut11,
    sourceAESOut42 TypeSourceAESOut11,
    sourceAESOut51 TypeSourceAESOut11,
    sourceAESOut52 TypeSourceAESOut11,
    sourceAESOut61 TypeSourceAESOut11,
    sourceAESOut62 TypeSourceAESOut11,
    sourceAESOut71 TypeSourceAESOut11,
    sourceAESOut72 TypeSourceAESOut11,
    sourceAESOut81 TypeSourceAESOut11,
    sourceAESOut82 TypeSourceAESOut11,
    autoTestPattern TypeAutoTestPattern,
    vFlag OnOffValue,
    deembPhaseSync OnOffValue,
    deembPhaseSyncVerify TypeDeembPhaseSyncVerify,
    temperatureMAX1617Int Integer32,
    temperatureMAX1617Ext Integer32,
    boardID Integer32,
    eventAESOutput1SignalincompleteSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput2SignalincompleteSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput3SignalincompleteSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput4SignalincompleteSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput5SignalincompleteSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput6SignalincompleteSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput7SignalincompleteSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput8SignalincompleteSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput1NoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput2NoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput3NoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput4NoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput5NoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput6NoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput7NoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventAESOutput8NoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventSDIInputinvaliddataSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventSDIInputNoInputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventHighTemperatureSNMP TypeEventAESOutput1SignalincompleteSNMP,
    eventSDIOutputAutoTestsignalSNMP TypeEventAESOutput1SignalincompleteSNMP,
    crossBarAudioOutAES DisplayString,
    sNumber DisplayString,
    event525videoinput OnOffValue,
    event169videoinput OnOffValue,
    event525videoinputSNMP TypeEventAESOutput1SignalincompleteSNMP,
    event169videoinputSNMP TypeEventAESOutput1SignalincompleteSNMP }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PDX5268-B-D-OG"
    ::= { sw411 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventAESOutput1Signalincomplete,
        eventAESOutput2Signalincomplete,
        eventAESOutput3Signalincomplete,
        eventAESOutput4Signalincomplete,
        eventAESOutput5Signalincomplete,
        eventAESOutput6Signalincomplete,
        eventAESOutput7Signalincomplete,
        eventAESOutput8Signalincomplete,
        eventAESOutput1NoInput,
        eventAESOutput2NoInput,
        eventAESOutput3NoInput,
        eventAESOutput4NoInput,
        eventAESOutput5NoInput,
        eventAESOutput6NoInput,
        eventAESOutput7NoInput,
        eventAESOutput8NoInput,
        eventSDIInputinvaliddata,
        eventSDIInputNoInput,
        eventHighTemperature,
        eventSDIOutputAutoTestsignal,
        inStandard,
        outStandard,
        refPLL2700Lock,
        refPLL74xLock,
        fastGenlock,
        embedded11,
        embedded12,
        embedded13,
        embedded14,
        embedded21,
        embedded22,
        embedded23,
        embedded24,
        embedded31,
        embedded32,
        embedded33,
        embedded34,
        embedded41,
        embedded42,
        embedded43,
        embedded44,
        sourceAESOut11,
        sourceAESOut12,
        sourceAESOut21,
        sourceAESOut22,
        sourceAESOut31,
        sourceAESOut32,
        sourceAESOut41,
        sourceAESOut42,
        sourceAESOut51,
        sourceAESOut52,
        sourceAESOut61,
        sourceAESOut62,
        sourceAESOut71,
        sourceAESOut72,
        sourceAESOut81,
        sourceAESOut82,
        autoTestPattern,
        vFlag,
        deembPhaseSync,
        deembPhaseSyncVerify,
        temperatureMAX1617Int,
        temperatureMAX1617Ext,
        boardID,
        eventAESOutput1SignalincompleteSNMP,
        eventAESOutput2SignalincompleteSNMP,
        eventAESOutput3SignalincompleteSNMP,
        eventAESOutput4SignalincompleteSNMP,
        eventAESOutput5SignalincompleteSNMP,
        eventAESOutput6SignalincompleteSNMP,
        eventAESOutput7SignalincompleteSNMP,
        eventAESOutput8SignalincompleteSNMP,
        eventAESOutput1NoInputSNMP,
        eventAESOutput2NoInputSNMP,
        eventAESOutput3NoInputSNMP,
        eventAESOutput4NoInputSNMP,
        eventAESOutput5NoInputSNMP,
        eventAESOutput6NoInputSNMP,
        eventAESOutput7NoInputSNMP,
        eventAESOutput8NoInputSNMP,
        eventSDIInputinvaliddataSNMP,
        eventSDIInputNoInputSNMP,
        eventHighTemperatureSNMP,
        eventSDIOutputAutoTestsignalSNMP,
        crossBarAudioOutAES,
        sNumber,
        event525videoinput,
        event169videoinput,
        event525videoinputSNMP,
        event169videoinputSNMP }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END