-- Machine generated MIB file, do not edit!
--
-- MIB file for PIE5610, type code 07.D2, software label 394
-- Generated on Tuesday, 09-Aug-16 11:36:48 UTC
-- CVS $Id: PIE5610_07d2_sw394.mib,v 1.17 2016/08/09 11:36:49 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs contain
-- unpublished proprietary information written by LYNX Technik AG and
-- are protected by Federal copyright law. They may not be disclosed
-- to third parties or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--
PIE5610-07d2-sw394-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
mib-modules, products,
FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;
pie5610-07d2-sw394 MODULE-IDENTITY
LAST-UPDATED "201608091136Z"
ORGANIZATION "LYNX Technik AG"
CONTACT-INFO "LYNX Technik AG
Brunnenweg 3
64331 Weiterstadt
http://www.lynx-technik.com
mailto:support@lynx-technik.com"
DESCRIPTION "MIB module definition for PIE5610, type code 07.D2, software label 394"
REVISION "201608091136Z"
DESCRIPTION "Generated by LYNX Asset Database"
::= { mib-modules 2002394 }
pie5610-07d2 OBJECT-IDENTITY
STATUS current
DESCRIPTION "LYNX device type PIE5610"
::= { products 2002 }
sw394 OBJECT-IDENTITY
STATUS current
DESCRIPTION "Software label 394"
::= { pie5610-07d2 394 }
-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unknown(0),
black(1),
green(2),
yellow(3),
red(4)
}
TypeFactoryReset ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
press(0)
}
TypeFreq ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
evenFreq(0),
oddFreq(1),
evenFreqX(2)
}
TypeGPIFunc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
freezeInput1(1),
freezeInput2(2),
freezeBothInputs(3),
switchUserPresets(4)
}
TypeInputStatusSDI1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
invalid(1),
n525(2),
n625(3),
n720p60(4),
n720p5994(5),
n720p50(6),
n720p30(7),
n720p2997(8),
n720p25(9),
n720p24(10),
n720p2398(11),
n1080i60(12),
n1080i5994(13),
n1080i50(14),
n1080p60(15),
n1080p5994(16),
n1080p50(17),
n1080p30(18),
n1080p2997(19),
n1080p25(20),
n1080p24(21),
n1080p2398(22),
n1080psF30(23),
n1080psF2997(24),
n1080psF25(25),
n1080psF24(26),
n1080psF2398(27)
}
TypeConv3ControlMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
manual(0),
aFDAutomated(1),
wSSAutomated(2),
vIAutomated(3)
}
TypeConv3AspectInSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n43(0),
n169(1)
}
TypeConv3FormatOut ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n52543(0),
n525169(1),
n62543(2),
n625169(3),
n525(4),
n625(5),
n720p60(6),
n720p5994(7),
n720p50(8),
n720p30(9),
n720p2997(10),
n720p25(11),
n720p24(12),
n720p2398(13),
n1080i60(14),
n1080i5994(15),
n1080i50(16),
n1080p30(17),
n1080p2997(18),
n1080p25(19),
n1080p24(20),
n1080p2398(21),
n1080psF24(22),
n1080psF2398(23)
}
TypeConv3StatusOut ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
invalid(0),
n525(1),
n625(2),
n720p60(3),
n720p5994(4),
n720p50(5),
n720p30(6),
n720p2997(7),
n720p25(8),
n720p24(9),
n720p2398(10),
n1080i60(11),
n1080i5994(12),
n1080i50(13),
n1080p60(14),
n1080p5994(15),
n1080p50(16),
n1080p30(17),
n1080p2997(18),
n1080p25(19),
n1080p24(20),
n1080p2398(21),
n1080psF30(22),
n1080psF2997(23),
n1080psF25(24),
n1080psF24(25),
n1080psF2398(26)
}
TypeConv3Mode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
pillarbox43Letterbox169(0),
centerCut(1),
n149Conversion(2),
stretchToFill(3),
custom(4)
}
TypeConv3MetaAFDInStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
present(1)
}
TypeConv3MetaCCCDPOutStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
present(1)
}
TypeConv3MetaCCCDPSourcePrio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
s334CDP(0),
s334RAW(1),
line21(2)
}
TypeConv3MetaCCCDPSourcePrio2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
s334CDP(1),
s334RAW(2),
line21(3)
}
TypeConv3MetaTCLTCSourcePrio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
aTCLTC(0),
aTCVITC(1),
dVITCA(2),
dVITCB(3)
}
TypeConv3MetaTCLTCSourcePrio2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
aTCLTC(1),
aTCVITC(2),
dVITCA(3),
dVITCB(4)
}
TypeConv3MetaTCDVITCInStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
present(1),
presentX(2),
presentXX(3)
}
TypeConv3MetaTCDVITCADestination625 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n6(0),
n7(1),
n8(2),
n9(3),
n10(4),
n11(5),
n12(6),
n13(7),
n14(8),
n15(9),
n16(10),
n17(11),
n18(12),
n19(13),
n20(14),
n21(15),
n22(16)
}
TypeConv3MetaTXTEncoderMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
wST625Only(1),
s2031WST(2),
oP47SDP(3)
}
TypeConv3MetaTXTLinesSelectionMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
automatic(0),
manual(1)
}
TypeConv3MetaField1Overflow ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
no(0),
yes(1)
}
TypeConv3MetaSMPTE2020Status ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
methodA(1),
methodB(2)
}
TypeConv3ModeAutoARto169 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
boxed(0),
cut(1),
stretch(2)
}
TypeConv3InsertAFDFullFrame169 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n1000(0),
n1010(1)
}
TypeConv3ModeAutoFallback ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
useLastValidFormatDescr(0),
useManualSettings(1)
}
TypeSDIIn1TXTDecoderMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
autoSelect(0),
wST625Only(1),
s2031WST(2),
oP47SDP(3)
}
TypeSDIIn1TCDVITCASource625 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
auto(0),
n6(1),
n7(2),
n8(3),
n9(4),
n10(5),
n11(6),
n12(7),
n13(8),
n14(9),
n15(10),
n16(11),
n17(12),
n18(13),
n19(14),
n20(15),
n21(16),
n22(17)
}
TypeOut1Assign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
input1(0),
hiQConverter(1)
}
TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
black(0),
red(1),
green(2),
blue(3),
cyan(4),
magenta(5),
yellow(6),
white(7),
n15Grey(8),
eQPath(9),
pLLPath(10),
eQPLLPath(11),
n75Colorbar(12),
colorbarOverRed(13)
}
TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n525(0),
n625(1),
n720p60(2),
n720p5994(3),
n720p50(4),
n720p30(5),
n720p2997(6),
n720p25(7),
n720p24(8),
n720p2398(9),
n1080i60(10),
n1080i5994(11),
n1080i50(12),
n1080p30(13),
n1080p2997(14),
n1080p25(15),
n1080p24(16),
n1080p2398(17),
n1080psF24(18),
n1080psF2398(19),
followLastInput(20)
}
TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freeze(0),
black(1),
testPattern(2)
}
TypeDelayPulseAssign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDIOut1(0),
sDIOut2(1)
}
TypePresetsGPIOn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
current(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeGenLockStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unlocked(0),
locked(1)
}
TypeAudioContentSDI11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
automatic(0),
pCMAudio(1),
dolbyE(2),
nonPCMData(3)
}
TypeAudioContentStatusSDI11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
pCMAudio(1),
dolbyE(2),
nonPCMData(3)
}
TypeSDIIn1StatusAFD ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
n0010LetterboxTopImageInA43Frame(1),
n0011Letterbox149ImageInA43Frame(2),
n0100169LetterboxCenterImageInA43Frame(3),
n1000FullFrameImageInA43Frame(4),
n1001FullFrameImageInA43Frame(5),
n1010169LetterboxImageVerticallyCenteredInA43Frame(6),
n1011149LetterboxImageVerticallyCenteredInA43Frame(7),
n110143ImageShootProtect149InA43Frame(8),
n1110169LetterboxImageShootProtect149InA43Frame(9),
n1111169LetterboxImageShootProtect43InA43Frame(10),
n0010169FullFrameImageInA169Frame(11),
n0011149PillarboxImageInA169Frame(12),
n0100169LetterboxCenterImageInA169Frame(13),
n1000FullFrameImageInA169Frame(14),
n1001PillarboxImageInA169Frame(15),
n1010Protected169FullFrameImageInA169Frame(16),
n1011149PillarboxImageInA169Frame(17),
n110143PillarboxImageShootProtect149InA169Frame(18),
n1110169ImageShootProtect149InA169Frame(19),
n1111169ImageShootProtect43InA169Frame(20)
}
TypeSDIIn1StatusWSS ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
fullFormat43(1),
box149Center(2),
box149Top(3),
box169Center(4),
box169Top(5),
box169CenterX(6),
fullFormat169CenterAndProtected149(7),
fullFormat169Anamorphic(8)
}
TypeSDIIn1StatusVI ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
n52543(1),
n62543(2),
n525169(3),
n625169(4)
}
TypeSDIIn1StatusFormatReactOnChange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
delayed(0),
quick(1)
}
TypeOut1DelayMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
framesLinesPixels(0),
milliSeconds(1)
}
TypeOut1FreezeMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freezeField1(0),
freezeField2(1),
freezeFrame(2),
testPattern(3)
}
TypeOut1EmbedBits ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
auto(0),
n20Bit(1)
}
TypeConv3COCOMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
gainOffset(0),
peakBlack(1)
}
TypePresetsSaveAs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
nA(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeEventSDIInput1NoInputSNMP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
onOnly(1),
offOnly(2),
onOff(3)
}
-- Parameter definitions
typeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LYNX product type name"
::= { paramEntry 1 }
displayName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
::= { paramEntry 2 }
position OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
::= { paramEntry 3 }
uptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Connection time of the device to this UI (in seconds)"
::= { paramEntry 4 }
type OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device type code"
::= { paramEntry 5 }
version OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device version information"
::= { paramEntry 6 }
statusColor OBJECT-TYPE
SYNTAX TypeStatusColor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
::= { paramEntry 7 }
statusColorRGB OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
::= { paramEntry 8 }
statusText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current status text (OK or error-details)"
::= { paramEntry 9 }
factoryReset OBJECT-TYPE
SYNTAX TypeFactoryReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
::= { paramEntry 10 }
lock OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock Device"
::= { paramEntry 11 }
locate OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
::= { paramEntry 12 }
eventSDIInput1NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: SDI Input 1 No Input"
::= { paramEntry 14 }
eventFanFailure OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: Fan Failure"
::= { paramEntry 15 }
eventHighTemperature OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: High Temperature"
::= { paramEntry 16 }
channel2CoupleTo1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI-Output Channel 2: couple all selections to channel 1"
::= { paramEntry 22 }
freq OBJECT-TYPE
SYNTAX TypeFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
::= { paramEntry 23 }
gPIFunc OBJECT-TYPE
SYNTAX TypeGPIFunc
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify influence of GPI input"
::= { paramEntry 24 }
inputStatusSDI1 OBJECT-TYPE
SYNTAX TypeInputStatusSDI1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of SDI input channel 1"
::= { paramEntry 25 }
conv3ControlMode OBJECT-TYPE
SYNTAX TypeConv3ControlMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select control mode of converter 3"
::= { paramEntry 26 }
conv3AspectInSelect OBJECT-TYPE
SYNTAX TypeConv3AspectInSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Aspect Ratio of Input signal - Converter 3
The auto setting will be interpreted as:
- 16:9 (HDTV)
- 4:3 (SDTV)"
::= { paramEntry 27 }
conv3AspectIn OBJECT-TYPE
SYNTAX TypeConv3AspectInSelect
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Aspect Ratio of Input signal - Converter 3"
::= { paramEntry 28 }
conv3FormatOut OBJECT-TYPE
SYNTAX TypeConv3FormatOut
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Signal format of scaler output"
::= { paramEntry 29 }
conv3StatusOut OBJECT-TYPE
SYNTAX TypeConv3StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of output - Converter 3"
::= { paramEntry 30 }
conv3Mode OBJECT-TYPE
SYNTAX TypeConv3Mode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Conversion mode of Converter 3"
::= { paramEntry 31 }
conv3AdvancedSettings OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Activate advanced settings from HiQ Scaler"
::= { paramEntry 32 }
conv3OutInsertAFD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Active format description into the video data from HiQ Scaler"
::= { paramEntry 33 }
conv3OutInsertVI OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Video Index into the video data from HiQ Scaler"
::= { paramEntry 34 }
conv3OutInsertWSS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Wide Screen Signaling into the video data from HiQ Scaler"
::= { paramEntry 35 }
conv3StatusIn OBJECT-TYPE
SYNTAX TypeConv3StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 3"
::= { paramEntry 36 }
conv3CropHpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start cutout (crop) from input image at this H position (pixel)"
::= { paramEntry 37 }
conv3CropVpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start cutout (crop) from input image at this V position (lines)"
::= { paramEntry 38 }
conv3CropHsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: cutout (crop) from input image this many pixels"
::= { paramEntry 39 }
conv3CropVsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: cutout (crop) from input image this many lines"
::= { paramEntry 40 }
conv3InsertHpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start insertion of source-cutout into output at this H position (pixel)"
::= { paramEntry 41 }
conv3InsertVpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start insertion of source-cutout into output at this V position (lines)"
::= { paramEntry 42 }
conv3InsertHsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: insert source-cutout into output in this many pixels"
::= { paramEntry 43 }
conv3InsertVsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: insert source-cutout into output in this many lines"
::= { paramEntry 44 }
conv3MotionAdaptive OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Motion adaptive filtering / de-interlacing"
::= { paramEntry 45 }
conv3NRGeneral OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "general level of noise reduction "
::= { paramEntry 46 }
conv3NRBlockArtifact OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "level of block artifact reduction"
::= { paramEntry 47 }
conv3NRMosquito OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "level of mosquito noise reduction"
::= { paramEntry 48 }
conv3DetailLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "level for detail enhancement"
::= { paramEntry 49 }
conv3DetailThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "threshold for detail enhancement"
::= { paramEntry 50 }
conv3MetaAdvancedSettings OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Activate advanced Meta Data settings of converter 3"
::= { paramEntry 51 }
conv3MetaCCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Close Caption to default for converter 3"
::= { paramEntry 52 }
conv3MetaTCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Time Code to default for converter 3"
::= { paramEntry 53 }
conv3MetaAFDInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AFD detection on input of converter 3"
::= { paramEntry 54 }
conv3MetaVIInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VI detection on input of converter 3"
::= { paramEntry 55 }
conv3MetaWSSInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "WSS detection on input of converter 3"
::= { paramEntry 56 }
conv3MetaCCCDPOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at output of converter 3"
::= { paramEntry 57 }
conv3MetaCCCDPInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at input of converter 3"
::= { paramEntry 58 }
conv3MetaCCCDPInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3"
::= { paramEntry 59 }
conv3MetaCCCDPSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 60 }
conv3MetaCCCDPSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 61 }
conv3MetaCCCDPSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 62 }
conv3MetaCCRAWOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at output of converter 3"
::= { paramEntry 63 }
conv3MetaCCRAWInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at input of converter 3"
::= { paramEntry 64 }
conv3MetaCCRAWInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 RAW transport packet (containing CEA-608 data) into output of converter 3"
::= { paramEntry 65 }
conv3MetaCCRAWSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 66 }
conv3MetaCCRAWSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 67 }
conv3MetaCCRAWSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 68 }
conv3MetaCCL21OutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as Line 21 (containing CEA-608 data) at output of converter 3"
::= { paramEntry 69 }
conv3MetaCCL21InStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as Line 21 (containing CEA-608 data) at input of converter 3"
::= { paramEntry 70 }
conv3MetaCCL21Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in Line 21 (containing CEA-608 data) into output of converter 3"
::= { paramEntry 71 }
conv3MetaCCL21SourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 72 }
conv3MetaCCL21SourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 73 }
conv3MetaCCL21SourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 74 }
conv3MetaTCLTCInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-LTC at input of converter 3"
::= { paramEntry 75 }
conv3MetaTCLTCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-LTC into output of converter 3"
::= { paramEntry 76 }
conv3MetaTCLTCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 77 }
conv3MetaTCLTCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 78 }
conv3MetaTCLTCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-LTC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 79 }
conv3MetaTCVITCInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-VITC at input of converter 3"
::= { paramEntry 80 }
conv3MetaTCVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-VITC into output of converter 3"
::= { paramEntry 81 }
conv3MetaTCVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 82 }
conv3MetaTCVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 83 }
conv3MetaTCVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-VITC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 84 }
conv3MetaTCDVITCInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as DVITC at input of converter 3"
::= { paramEntry 85 }
conv3MetaTCDVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as DVITC into output of converter 3"
::= { paramEntry 86 }
conv3MetaTCDVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as DVITC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 87 }
conv3MetaTCDVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as DVITC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 88 }
conv3MetaTCDVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as DVITC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 89 }
conv3MetaTCLTCOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-LTC on output of converter 3"
::= { paramEntry 90 }
conv3MetaTCVITCOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-VITC on output of converter 3"
::= { paramEntry 91 }
conv3MetaTCDVITCAOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-A on output of converter 3"
::= { paramEntry 92 }
conv3MetaTCDVITCBOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-B on output of converter 3"
::= { paramEntry 93 }
conv3MetaTCDVITCADestination625 OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 3 (for even frequency standards)"
::= { paramEntry 94 }
conv3MetaTCDVITCBDestination625 OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 3 (for even frequency standards)"
::= { paramEntry 95 }
conv3MetaTCDVITCADestination525 OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 3 (for odd frequency standards)"
::= { paramEntry 96 }
conv3MetaTCDVITCBDestination525 OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 3 (for odd frequency standards)"
::= { paramEntry 97 }
conv3MetaTCDVITCADetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-A TimeCode has been detected in the input of converter 3"
::= { paramEntry 98 }
conv3MetaTCDVITCBDetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-B TimeCode has been detected in the input of converter 3"
::= { paramEntry 99 }
conv3MetaTCVITCDetectedDVITCLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the incoming VITC shall be inserted into the output of converter 3, when it is encoded as DVITC."
::= { paramEntry 100 }
conv3MetaTCDVITCAutomatic OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable automatic selection of DVITC line for insertion on output of converter 3"
::= { paramEntry 101 }
conv3MetaTXTWSTInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as WST at input of converter 3"
::= { paramEntry 102 }
conv3MetaTXTS2031InStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as S2031 transport packet at input of converter 3"
::= { paramEntry 103 }
conv3MetaTXTOP47InStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as OP47 Subtitling Distribution Packet at input of converter 3"
::= { paramEntry 104 }
conv3MetaTXTEncoderMode OBJECT-TYPE
SYNTAX TypeConv3MetaTXTEncoderMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext Encoder Settings of converter 3"
::= { paramEntry 105 }
conv3MetaTXTLinesSelectionMode OBJECT-TYPE
SYNTAX TypeConv3MetaTXTLinesSelectionMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext lines selection mode of converter 3"
::= { paramEntry 106 }
conv3MetaField1Overflow OBJECT-TYPE
SYNTAX TypeConv3MetaField1Overflow
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 1 at output of converter 3"
::= { paramEntry 113 }
conv3MetaField2Overflow OBJECT-TYPE
SYNTAX TypeConv3MetaField1Overflow
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 2 at output of converter 3"
::= { paramEntry 114 }
conv3MetaSMPTE2020Status OBJECT-TYPE
SYNTAX TypeConv3MetaSMPTE2020Status
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Meta Data SMPTE 2020 transport packet at input of converter 3"
::= { paramEntry 115 }
conv3MetaSMPTE2020Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of Meta Data SMPTE 2020 transport packet at output of converter 3"
::= { paramEntry 116 }
conv3ModeAutoARto169 OBJECT-TYPE
SYNTAX TypeConv3ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 16:9 mode for Converter 3"
::= { paramEntry 117 }
conv3ModeAutoARto43 OBJECT-TYPE
SYNTAX TypeConv3ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 4:3 mode for Converter 3"
::= { paramEntry 118 }
conv3InsertAFDFullFrame169 OBJECT-TYPE
SYNTAX TypeConv3InsertAFDFullFrame169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AFD Full Frame 16:9 mode for Converter 3"
::= { paramEntry 119 }
conv3ModeAutoFallback OBJECT-TYPE
SYNTAX TypeConv3ModeAutoFallback
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Auto Fallback mode for Converter 3"
::= { paramEntry 120 }
sDIIn1TXTWSTInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as WST at SDI Input 1"
::= { paramEntry 121 }
sDIIn1TXTS2031InStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as S2031 transport packet at SDI Input 1"
::= { paramEntry 122 }
sDIIn1TXTOP47InStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as OP47 transport packet at SDI Input 1"
::= { paramEntry 123 }
sDIIn1TXTDecoderMode OBJECT-TYPE
SYNTAX TypeSDIIn1TXTDecoderMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext Decoder Settings at SDI Input 1"
::= { paramEntry 124 }
sDIIn1TCDVITCASource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 1 (for even-frequency standards)"
::= { paramEntry 125 }
sDIIn1TCDVITCBSource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 1 (for even-frequency standards)"
::= { paramEntry 126 }
sDIIn1TCDVITCASource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 1 (for odd-frequency standards)"
::= { paramEntry 127 }
sDIIn1TCDVITCBSource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 1 (for odd-frequency standards)"
::= { paramEntry 128 }
sDIIn1CCCDPStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at SDI Input 1"
::= { paramEntry 129 }
sDIIn1CCRAWStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at SDI Input 1"
::= { paramEntry 130 }
sDIIn1CCL21Status OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as Line 21 (containing CEA-608 data) at SDI Input 1"
::= { paramEntry 131 }
sDIIn1TCLTCStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-LTC at SDI Input 1"
::= { paramEntry 132 }
sDIIn1TCVITCStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-VITC at SDI Input 1"
::= { paramEntry 133 }
sDIIn1TCDVITCStatus OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as DVITC at SDI Input 1"
::= { paramEntry 134 }
out1Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 1 to Input (direct) or to one of the Converters"
::= { paramEntry 135 }
out1Standard OBJECT-TYPE
SYNTAX TypeConv3StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 1"
::= { paramEntry 136 }
out2Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 2 to Input (direct) or to one of the Converters"
::= { paramEntry 137 }
out2Standard OBJECT-TYPE
SYNTAX TypeConv3StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 2"
::= { paramEntry 138 }
out1DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in frames. Combine with Out1/DelayLines and Out1/DelayPixel for total delay"
::= { paramEntry 139 }
out1DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in lines. Combine with Out1/DelayFrames and Out1/DelayPixel for total delay"
::= { paramEntry 140 }
out1DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in pixel. Combine with Out1/DelayFrames and Out1/DelayLines for total delay"
::= { paramEntry 141 }
out1DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 user delay in milliseconds."
::= { paramEntry 142 }
out1ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable aperture correction"
::= { paramEntry 143 }
out1ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: aperture correction level"
::= { paramEntry 144 }
out1HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable H-Blanking"
::= { paramEntry 145 }
out1VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable V-Blanking"
::= { paramEntry 146 }
out1Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust Video Gain"
::= { paramEntry 147 }
out1Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Saturation"
::= { paramEntry 148 }
out1BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
::= { paramEntry 149 }
out1Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Hue"
::= { paramEntry 150 }
out1TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 151 }
out1TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 152 }
out1TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable preselected test pattern"
::= { paramEntry 153 }
out1IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 154 }
out2DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in frames. Combine with Out2/DelayLines and Out2/DelayPixel for total delay"
::= { paramEntry 156 }
out2DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in lines. Combine with Out2/DelayFrames and Out2/DelayPixel for total delay"
::= { paramEntry 157 }
out2DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in pixel. Combine with Out2/DelayFrames and Out2/DelayLines for total delay"
::= { paramEntry 158 }
out2DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 user delay in milliseconds."
::= { paramEntry 159 }
out2ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable aperture correction"
::= { paramEntry 160 }
out2ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: aperture correction level"
::= { paramEntry 161 }
out2HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable H-Blanking"
::= { paramEntry 162 }
out2VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable V-Blanking"
::= { paramEntry 163 }
out2Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust Video Gain"
::= { paramEntry 164 }
out2Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Saturation"
::= { paramEntry 165 }
out2BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video black level (in IRE)"
::= { paramEntry 166 }
out2Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Hue"
::= { paramEntry 167 }
out2TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 168 }
out2TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out2/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 169 }
out2TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable preselected test pattern"
::= { paramEntry 170 }
out2IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 171 }
temperatureMAX1617Int OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PCB temperature (MAX1617) in C"
::= { paramEntry 175 }
temperatureMAX1617Ext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FPGA temperature in C"
::= { paramEntry 176 }
delayPulseAssign OBJECT-TYPE
SYNTAX TypeDelayPulseAssign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign the Delay Pulse Output to one of the SDI Outputs.
The generated Delay Pulse will represent the exact amount of time that the video signal on this output has been delayed from SDI-Input to SDI-Output."
::= { paramEntry 177 }
presetsGPIOn OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 178 }
presetsGPIOff OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 179 }
genLockStatus OBJECT-TYPE
SYNTAX TypeGenLockStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lock-Status of LMH1982"
::= { paramEntry 180 }
inputToRefDelay1H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Horizontal delay between Input 1 and Reference"
::= { paramEntry 181 }
inputToRefDelay1V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Vertical delay between Input 1 and Reference"
::= { paramEntry 182 }
inputToRefDelay2H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "InputToRefDelay2H"
::= { paramEntry 183 }
inputToRefDelay2V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "InputToRefDelay2V"
::= { paramEntry 184 }
audioContentSDI11 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.1"
::= { paramEntry 185 }
audioContentSDI12 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.2"
::= { paramEntry 186 }
audioContentSDI13 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.3"
::= { paramEntry 187 }
audioContentSDI14 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.4"
::= { paramEntry 188 }
audioContentSDI15 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.5"
::= { paramEntry 189 }
audioContentSDI16 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.6"
::= { paramEntry 190 }
audioContentSDI17 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.7"
::= { paramEntry 191 }
audioContentSDI18 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.8"
::= { paramEntry 192 }
audioContentStatusSDI11 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.1"
::= { paramEntry 193 }
audioContentStatusSDI12 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.2"
::= { paramEntry 194 }
audioContentStatusSDI13 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.3"
::= { paramEntry 195 }
audioContentStatusSDI14 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.4"
::= { paramEntry 196 }
audioContentStatusSDI15 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.5"
::= { paramEntry 197 }
audioContentStatusSDI16 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.6"
::= { paramEntry 198 }
audioContentStatusSDI17 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.7"
::= { paramEntry 199 }
audioContentStatusSDI18 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.8"
::= { paramEntry 200 }
sDIIn1StatusAFD OBJECT-TYPE
SYNTAX TypeSDIIn1StatusAFD
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected AFD code on SDI input 1"
::= { paramEntry 229 }
sDIIn1StatusWSS OBJECT-TYPE
SYNTAX TypeSDIIn1StatusWSS
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected WSS code on SDI input 1"
::= { paramEntry 230 }
sDIIn1StatusVI OBJECT-TYPE
SYNTAX TypeSDIIn1StatusVI
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected VI code on SDI input 1"
::= { paramEntry 231 }
sDIIn1StatusFormatReactOnChange OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to CHANGE of format description (AFD, WSS, VI) in SDI Input 1 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable."
::= { paramEntry 245 }
sDIIn1StatusFormatReactOnLoss OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to LOSS of format description (AFD, WSS, VI) in SDI Input 1 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable"
::= { paramEntry 246 }
snapToReferenceFrameLength OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to ON, the minimum total video processing time is set to be equal to the length of one video-frame of the reference standard. E.g. synchronizing a 720p50 SDI to a 625 REF will delay the SDI by minimum 40ms (instead of 20ms).This mode can only be used with synchronous SDI inputs.The default value is OFF."
::= { paramEntry 247 }
out1ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 248 }
out2ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 249 }
out1FixedProcTime OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: Set the video processing time to a fixed value, independent of the current mode of operation"
::= { paramEntry 250 }
out2FixedProcTime OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: Set the video processing time to a fixed value, independent of the current mode of operation"
::= { paramEntry 251 }
out1DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 1"
::= { paramEntry 252 }
out2DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 2"
::= { paramEntry 253 }
out1FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: specify freeze mode if input is missing."
::= { paramEntry 254 }
out2FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: specify freeze mode if input is missing."
::= { paramEntry 255 }
out1EmbedBits OBJECT-TYPE
SYNTAX TypeOut1EmbedBits
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When the signal of output 1 is coming from the converter and the output format is SDTV, this switch allows to force the re-embedded audio data to 20 Bit. By default (setting = auto), the audio is re-embedded with the same bit-size as the audio that is available on the input. Note: this switch has no effect if this SDI-output is not coming from the converter, or if the output format is not SDTV."
::= { paramEntry 256 }
out2EmbedBits OBJECT-TYPE
SYNTAX TypeOut1EmbedBits
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When the signal of output 2 is coming from the converter and the output format is SDTV, this switch allows to force the re-embedded audio data to 20 Bit. By default (setting = auto), the audio is re-embedded with the same bit-size as the audio that is available on the input. Note: this switch has no effect if this SDI-output is not coming from the converter, or if the output format is not SDTV."
::= { paramEntry 257 }
conv3COCOGainG OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gain adjustment for GREEN channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 258 }
conv3COCOGainB OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gain adjustment for BLUE channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 259 }
conv3COCOGainR OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gain adjustment for RED channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 260 }
conv3COCOOffsetG OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Offset adjustment for GREEN channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 261 }
conv3COCOOffsetB OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Offset adjustment for BLUE channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 262 }
conv3COCOOffsetR OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Offset adjustment for RED channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 263 }
conv3COCOGangGains OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all color correction gain values (modify all gain controls synchronously)"
::= { paramEntry 264 }
conv3COCOGangOffsets OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all color correction offset values
(modify all offset controls synchronously)"
::= { paramEntry 265 }
conv3COCOMode OBJECT-TYPE
SYNTAX TypeConv3COCOMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify operation mode for the ColorCorrection stage in the LYNX HiQ Scaler.
- Gain & Offset (default) : Offset is applied as linear addition to the signal
- Peak & Black: Black Adjustment is applied to signal non-linearily. This avoids overlevels resp. clipping."
::= { paramEntry 266 }
out1TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 1"
::= { paramEntry 267 }
out2TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 2"
::= { paramEntry 268 }
presetsNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "maximum number of user presets"
::= { paramEntry 270 }
presetsActive OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select the Active Preset.
NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka Current) and make the required modifications there."
::= { paramEntry 271 }
presetsSaveAs OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
::= { paramEntry 272 }
presetsLoadToCurrent OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "loads selected user preset into the current user settings, all actual user changes will be lost"
::= { paramEntry 273 }
presetsName0 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 0"
::= { paramEntry 274 }
presetsName1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 1"
::= { paramEntry 275 }
presetsName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 2"
::= { paramEntry 276 }
presetsName3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 3"
::= { paramEntry 277 }
presetsName4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 4"
::= { paramEntry 278 }
presetsName5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 5"
::= { paramEntry 279 }
presetsName6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 6"
::= { paramEntry 280 }
presetsName7 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 7"
::= { paramEntry 281 }
out1FrameSyncCompensation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Frame Sync Compensation"
::= { paramEntry 284 }
boardID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "BoardID"
::= { paramEntry 286 }
eventSDIInput1NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventSDIInput1NoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: SDI Input 1 No Input"
::= { paramEntry 287 }
eventFanFailureSNMP OBJECT-TYPE
SYNTAX TypeEventSDIInput1NoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Fan Failure"
::= { paramEntry 288 }
eventHighTemperatureSNMP OBJECT-TYPE
SYNTAX TypeEventSDIInput1NoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: High Temperature"
::= { paramEntry 289 }
conv3InputStatus OBJECT-TYPE
SYNTAX TypeInputStatusSDI1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 3"
::= { paramEntry 290 }
conv3InSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Conv 3 Input Image Size (pixels)"
::= { paramEntry 291 }
conv3OutSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Conv 3 Output Image Size (pixels)"
::= { paramEntry 292 }
sNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial Number"
::= { paramEntry 293 }
-- Parameter table
paramTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PIE5610 parameters"
::= { sw394 1 }
paramEntry OBJECT-TYPE
SYNTAX ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row in the table of PIE5610 parameters"
INDEX { IMPLIED position }
::= { paramTable 1 }
ParamEntry ::= SEQUENCE {
typeName DisplayString,
displayName DisplayString,
position OCTET STRING,
uptime TimeTicks,
type DisplayString,
version DisplayString,
statusColor TypeStatusColor,
statusColorRGB DisplayString,
statusText DisplayString,
factoryReset TypeFactoryReset,
lock OnOffValue,
locate OnOffValue,
eventSDIInput1NoInput OnOffValue,
eventFanFailure OnOffValue,
eventHighTemperature OnOffValue,
channel2CoupleTo1 OnOffValue,
freq TypeFreq,
gPIFunc TypeGPIFunc,
inputStatusSDI1 TypeInputStatusSDI1,
conv3ControlMode TypeConv3ControlMode,
conv3AspectInSelect TypeConv3AspectInSelect,
conv3AspectIn TypeConv3AspectInSelect,
conv3FormatOut TypeConv3FormatOut,
conv3StatusOut TypeConv3StatusOut,
conv3Mode TypeConv3Mode,
conv3AdvancedSettings OnOffValue,
conv3OutInsertAFD OnOffValue,
conv3OutInsertVI OnOffValue,
conv3OutInsertWSS OnOffValue,
conv3StatusIn TypeConv3StatusOut,
conv3CropHpos Integer32,
conv3CropVpos Integer32,
conv3CropHsize Integer32,
conv3CropVsize Integer32,
conv3InsertHpos Integer32,
conv3InsertVpos Integer32,
conv3InsertHsize Integer32,
conv3InsertVsize Integer32,
conv3MotionAdaptive OnOffValue,
conv3NRGeneral Integer32,
conv3NRBlockArtifact Integer32,
conv3NRMosquito Integer32,
conv3DetailLevel Integer32,
conv3DetailThreshold Integer32,
conv3MetaAdvancedSettings OnOffValue,
conv3MetaCCSourceDefaultPriorities OnOffValue,
conv3MetaTCSourceDefaultPriorities OnOffValue,
conv3MetaAFDInStatus TypeConv3MetaAFDInStatus,
conv3MetaVIInStatus TypeConv3MetaAFDInStatus,
conv3MetaWSSInStatus TypeConv3MetaAFDInStatus,
conv3MetaCCCDPOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaCCCDPInStatus TypeConv3MetaAFDInStatus,
conv3MetaCCCDPInsertion OnOffValue,
conv3MetaCCCDPSourcePrio1 TypeConv3MetaCCCDPSourcePrio1,
conv3MetaCCCDPSourcePrio2 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaCCCDPSourcePrio3 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaCCRAWOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaCCRAWInStatus TypeConv3MetaAFDInStatus,
conv3MetaCCRAWInsertion OnOffValue,
conv3MetaCCRAWSourcePrio1 TypeConv3MetaCCCDPSourcePrio1,
conv3MetaCCRAWSourcePrio2 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaCCRAWSourcePrio3 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaCCL21OutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaCCL21InStatus TypeConv3MetaAFDInStatus,
conv3MetaCCL21Insertion OnOffValue,
conv3MetaCCL21SourcePrio1 TypeConv3MetaCCCDPSourcePrio1,
conv3MetaCCL21SourcePrio2 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaCCL21SourcePrio3 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaTCLTCInStatus TypeConv3MetaAFDInStatus,
conv3MetaTCLTCInsertion OnOffValue,
conv3MetaTCLTCSourcePrio1 TypeConv3MetaTCLTCSourcePrio1,
conv3MetaTCLTCSourcePrio2 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCLTCSourcePrio3 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCVITCInStatus TypeConv3MetaAFDInStatus,
conv3MetaTCVITCInsertion OnOffValue,
conv3MetaTCVITCSourcePrio1 TypeConv3MetaTCLTCSourcePrio1,
conv3MetaTCVITCSourcePrio2 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCVITCSourcePrio3 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCDVITCInStatus TypeConv3MetaTCDVITCInStatus,
conv3MetaTCDVITCInsertion OnOffValue,
conv3MetaTCDVITCSourcePrio1 TypeConv3MetaTCLTCSourcePrio1,
conv3MetaTCDVITCSourcePrio2 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCDVITCSourcePrio3 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCLTCOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaTCVITCOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaTCDVITCAOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaTCDVITCBOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaTCDVITCADestination625 TypeConv3MetaTCDVITCADestination625,
conv3MetaTCDVITCBDestination625 TypeConv3MetaTCDVITCADestination625,
conv3MetaTCDVITCADestination525 TypeConv3MetaTCDVITCADestination625,
conv3MetaTCDVITCBDestination525 TypeConv3MetaTCDVITCADestination625,
conv3MetaTCDVITCADetectedSrcLine Integer32,
conv3MetaTCDVITCBDetectedSrcLine Integer32,
conv3MetaTCVITCDetectedDVITCLine Integer32,
conv3MetaTCDVITCAutomatic OnOffValue,
conv3MetaTXTWSTInStatus TypeConv3MetaAFDInStatus,
conv3MetaTXTS2031InStatus TypeConv3MetaAFDInStatus,
conv3MetaTXTOP47InStatus TypeConv3MetaAFDInStatus,
conv3MetaTXTEncoderMode TypeConv3MetaTXTEncoderMode,
conv3MetaTXTLinesSelectionMode TypeConv3MetaTXTLinesSelectionMode,
conv3MetaField1Overflow TypeConv3MetaField1Overflow,
conv3MetaField2Overflow TypeConv3MetaField1Overflow,
conv3MetaSMPTE2020Status TypeConv3MetaSMPTE2020Status,
conv3MetaSMPTE2020Insertion OnOffValue,
conv3ModeAutoARto169 TypeConv3ModeAutoARto169,
conv3ModeAutoARto43 TypeConv3ModeAutoARto169,
conv3InsertAFDFullFrame169 TypeConv3InsertAFDFullFrame169,
conv3ModeAutoFallback TypeConv3ModeAutoFallback,
sDIIn1TXTWSTInStatus TypeConv3MetaAFDInStatus,
sDIIn1TXTS2031InStatus TypeConv3MetaAFDInStatus,
sDIIn1TXTOP47InStatus TypeConv3MetaAFDInStatus,
sDIIn1TXTDecoderMode TypeSDIIn1TXTDecoderMode,
sDIIn1TCDVITCASource625 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource625 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCASource525 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource525 TypeSDIIn1TCDVITCASource625,
sDIIn1CCCDPStatus TypeConv3MetaAFDInStatus,
sDIIn1CCRAWStatus TypeConv3MetaAFDInStatus,
sDIIn1CCL21Status TypeConv3MetaAFDInStatus,
sDIIn1TCLTCStatus TypeConv3MetaAFDInStatus,
sDIIn1TCVITCStatus TypeConv3MetaAFDInStatus,
sDIIn1TCDVITCStatus TypeConv3MetaTCDVITCInStatus,
out1Assign TypeOut1Assign,
out1Standard TypeConv3StatusOut,
out2Assign TypeOut1Assign,
out2Standard TypeConv3StatusOut,
out1DelayFrames Integer32,
out1DelayLines Integer32,
out1DelayPixel Integer32,
out1DelayMs FixedPointValue3,
out1ApertureEnable OnOffValue,
out1ApertureLevel Integer32,
out1HBlank OnOffValue,
out1VBlank OnOffValue,
out1Gain Integer32,
out1Saturation Integer32,
out1BlackLevel FixedPointValue1,
out1Hue FixedPointValue1,
out1TestPatternSelect TypeOut1TestPatternSelect,
out1TestPatternStd TypeOut1TestPatternStd,
out1TestPatternOn OnOffValue,
out1IfNoInput TypeOut1IfNoInput,
out2DelayFrames Integer32,
out2DelayLines Integer32,
out2DelayPixel Integer32,
out2DelayMs FixedPointValue3,
out2ApertureEnable OnOffValue,
out2ApertureLevel Integer32,
out2HBlank OnOffValue,
out2VBlank OnOffValue,
out2Gain Integer32,
out2Saturation Integer32,
out2BlackLevel FixedPointValue1,
out2Hue FixedPointValue1,
out2TestPatternSelect TypeOut1TestPatternSelect,
out2TestPatternStd TypeOut1TestPatternStd,
out2TestPatternOn OnOffValue,
out2IfNoInput TypeOut1IfNoInput,
temperatureMAX1617Int Integer32,
temperatureMAX1617Ext Integer32,
delayPulseAssign TypeDelayPulseAssign,
presetsGPIOn TypePresetsGPIOn,
presetsGPIOff TypePresetsGPIOn,
genLockStatus TypeGenLockStatus,
inputToRefDelay1H Integer32,
inputToRefDelay1V Integer32,
inputToRefDelay2H Integer32,
inputToRefDelay2V Integer32,
audioContentSDI11 TypeAudioContentSDI11,
audioContentSDI12 TypeAudioContentSDI11,
audioContentSDI13 TypeAudioContentSDI11,
audioContentSDI14 TypeAudioContentSDI11,
audioContentSDI15 TypeAudioContentSDI11,
audioContentSDI16 TypeAudioContentSDI11,
audioContentSDI17 TypeAudioContentSDI11,
audioContentSDI18 TypeAudioContentSDI11,
audioContentStatusSDI11 TypeAudioContentStatusSDI11,
audioContentStatusSDI12 TypeAudioContentStatusSDI11,
audioContentStatusSDI13 TypeAudioContentStatusSDI11,
audioContentStatusSDI14 TypeAudioContentStatusSDI11,
audioContentStatusSDI15 TypeAudioContentStatusSDI11,
audioContentStatusSDI16 TypeAudioContentStatusSDI11,
audioContentStatusSDI17 TypeAudioContentStatusSDI11,
audioContentStatusSDI18 TypeAudioContentStatusSDI11,
sDIIn1StatusAFD TypeSDIIn1StatusAFD,
sDIIn1StatusWSS TypeSDIIn1StatusWSS,
sDIIn1StatusVI TypeSDIIn1StatusVI,
sDIIn1StatusFormatReactOnChange TypeSDIIn1StatusFormatReactOnChange,
sDIIn1StatusFormatReactOnLoss TypeSDIIn1StatusFormatReactOnChange,
snapToReferenceFrameLength OnOffValue,
out1ClipHeadroom OnOffValue,
out2ClipHeadroom OnOffValue,
out1FixedProcTime OnOffValue,
out2FixedProcTime OnOffValue,
out1DelayMode TypeOut1DelayMode,
out2DelayMode TypeOut1DelayMode,
out1FreezeMode TypeOut1FreezeMode,
out2FreezeMode TypeOut1FreezeMode,
out1EmbedBits TypeOut1EmbedBits,
out2EmbedBits TypeOut1EmbedBits,
conv3COCOGainG FixedPointValue1,
conv3COCOGainB FixedPointValue1,
conv3COCOGainR FixedPointValue1,
conv3COCOOffsetG FixedPointValue1,
conv3COCOOffsetB FixedPointValue1,
conv3COCOOffsetR FixedPointValue1,
conv3COCOGangGains OnOffValue,
conv3COCOGangOffsets OnOffValue,
conv3COCOMode TypeConv3COCOMode,
out1TotalProcTime FixedPointValue3,
out2TotalProcTime FixedPointValue3,
presetsNumber Integer32,
presetsActive TypePresetsGPIOn,
presetsSaveAs TypePresetsSaveAs,
presetsLoadToCurrent TypePresetsSaveAs,
presetsName0 DisplayString,
presetsName1 DisplayString,
presetsName2 DisplayString,
presetsName3 DisplayString,
presetsName4 DisplayString,
presetsName5 DisplayString,
presetsName6 DisplayString,
presetsName7 DisplayString,
out1FrameSyncCompensation Integer32,
boardID Integer32,
eventSDIInput1NoInputSNMP TypeEventSDIInput1NoInputSNMP,
eventFanFailureSNMP TypeEventSDIInput1NoInputSNMP,
eventHighTemperatureSNMP TypeEventSDIInput1NoInputSNMP,
conv3InputStatus TypeInputStatusSDI1,
conv3InSize DisplayString,
conv3OutSize DisplayString,
sNumber DisplayString }
-- Conformance statements
conformance OBJECT-IDENTITY
STATUS current
DESCRIPTION "Conformance declaration of PIE5610"
::= { sw394 2 }
paramGroup OBJECT-GROUP
OBJECTS {
typeName,
displayName,
position,
uptime,
type,
version,
statusColor,
statusColorRGB,
statusText,
factoryReset,
lock,
locate,
eventSDIInput1NoInput,
eventFanFailure,
eventHighTemperature,
channel2CoupleTo1,
freq,
gPIFunc,
inputStatusSDI1,
conv3ControlMode,
conv3AspectInSelect,
conv3AspectIn,
conv3FormatOut,
conv3StatusOut,
conv3Mode,
conv3AdvancedSettings,
conv3OutInsertAFD,
conv3OutInsertVI,
conv3OutInsertWSS,
conv3StatusIn,
conv3CropHpos,
conv3CropVpos,
conv3CropHsize,
conv3CropVsize,
conv3InsertHpos,
conv3InsertVpos,
conv3InsertHsize,
conv3InsertVsize,
conv3MotionAdaptive,
conv3NRGeneral,
conv3NRBlockArtifact,
conv3NRMosquito,
conv3DetailLevel,
conv3DetailThreshold,
conv3MetaAdvancedSettings,
conv3MetaCCSourceDefaultPriorities,
conv3MetaTCSourceDefaultPriorities,
conv3MetaAFDInStatus,
conv3MetaVIInStatus,
conv3MetaWSSInStatus,
conv3MetaCCCDPOutStatus,
conv3MetaCCCDPInStatus,
conv3MetaCCCDPInsertion,
conv3MetaCCCDPSourcePrio1,
conv3MetaCCCDPSourcePrio2,
conv3MetaCCCDPSourcePrio3,
conv3MetaCCRAWOutStatus,
conv3MetaCCRAWInStatus,
conv3MetaCCRAWInsertion,
conv3MetaCCRAWSourcePrio1,
conv3MetaCCRAWSourcePrio2,
conv3MetaCCRAWSourcePrio3,
conv3MetaCCL21OutStatus,
conv3MetaCCL21InStatus,
conv3MetaCCL21Insertion,
conv3MetaCCL21SourcePrio1,
conv3MetaCCL21SourcePrio2,
conv3MetaCCL21SourcePrio3,
conv3MetaTCLTCInStatus,
conv3MetaTCLTCInsertion,
conv3MetaTCLTCSourcePrio1,
conv3MetaTCLTCSourcePrio2,
conv3MetaTCLTCSourcePrio3,
conv3MetaTCVITCInStatus,
conv3MetaTCVITCInsertion,
conv3MetaTCVITCSourcePrio1,
conv3MetaTCVITCSourcePrio2,
conv3MetaTCVITCSourcePrio3,
conv3MetaTCDVITCInStatus,
conv3MetaTCDVITCInsertion,
conv3MetaTCDVITCSourcePrio1,
conv3MetaTCDVITCSourcePrio2,
conv3MetaTCDVITCSourcePrio3,
conv3MetaTCLTCOutStatus,
conv3MetaTCVITCOutStatus,
conv3MetaTCDVITCAOutStatus,
conv3MetaTCDVITCBOutStatus,
conv3MetaTCDVITCADestination625,
conv3MetaTCDVITCBDestination625,
conv3MetaTCDVITCADestination525,
conv3MetaTCDVITCBDestination525,
conv3MetaTCDVITCADetectedSrcLine,
conv3MetaTCDVITCBDetectedSrcLine,
conv3MetaTCVITCDetectedDVITCLine,
conv3MetaTCDVITCAutomatic,
conv3MetaTXTWSTInStatus,
conv3MetaTXTS2031InStatus,
conv3MetaTXTOP47InStatus,
conv3MetaTXTEncoderMode,
conv3MetaTXTLinesSelectionMode,
conv3MetaField1Overflow,
conv3MetaField2Overflow,
conv3MetaSMPTE2020Status,
conv3MetaSMPTE2020Insertion,
conv3ModeAutoARto169,
conv3ModeAutoARto43,
conv3InsertAFDFullFrame169,
conv3ModeAutoFallback,
sDIIn1TXTWSTInStatus,
sDIIn1TXTS2031InStatus,
sDIIn1TXTOP47InStatus,
sDIIn1TXTDecoderMode,
sDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource625,
sDIIn1TCDVITCASource525,
sDIIn1TCDVITCBSource525,
sDIIn1CCCDPStatus,
sDIIn1CCRAWStatus,
sDIIn1CCL21Status,
sDIIn1TCLTCStatus,
sDIIn1TCVITCStatus,
sDIIn1TCDVITCStatus,
out1Assign,
out1Standard,
out2Assign,
out2Standard,
out1DelayFrames,
out1DelayLines,
out1DelayPixel,
out1DelayMs,
out1ApertureEnable,
out1ApertureLevel,
out1HBlank,
out1VBlank,
out1Gain,
out1Saturation,
out1BlackLevel,
out1Hue,
out1TestPatternSelect,
out1TestPatternStd,
out1TestPatternOn,
out1IfNoInput,
out2DelayFrames,
out2DelayLines,
out2DelayPixel,
out2DelayMs,
out2ApertureEnable,
out2ApertureLevel,
out2HBlank,
out2VBlank,
out2Gain,
out2Saturation,
out2BlackLevel,
out2Hue,
out2TestPatternSelect,
out2TestPatternStd,
out2TestPatternOn,
out2IfNoInput,
temperatureMAX1617Int,
temperatureMAX1617Ext,
delayPulseAssign,
presetsGPIOn,
presetsGPIOff,
genLockStatus,
inputToRefDelay1H,
inputToRefDelay1V,
inputToRefDelay2H,
inputToRefDelay2V,
audioContentSDI11,
audioContentSDI12,
audioContentSDI13,
audioContentSDI14,
audioContentSDI15,
audioContentSDI16,
audioContentSDI17,
audioContentSDI18,
audioContentStatusSDI11,
audioContentStatusSDI12,
audioContentStatusSDI13,
audioContentStatusSDI14,
audioContentStatusSDI15,
audioContentStatusSDI16,
audioContentStatusSDI17,
audioContentStatusSDI18,
sDIIn1StatusAFD,
sDIIn1StatusWSS,
sDIIn1StatusVI,
sDIIn1StatusFormatReactOnChange,
sDIIn1StatusFormatReactOnLoss,
snapToReferenceFrameLength,
out1ClipHeadroom,
out2ClipHeadroom,
out1FixedProcTime,
out2FixedProcTime,
out1DelayMode,
out2DelayMode,
out1FreezeMode,
out2FreezeMode,
out1EmbedBits,
out2EmbedBits,
conv3COCOGainG,
conv3COCOGainB,
conv3COCOGainR,
conv3COCOOffsetG,
conv3COCOOffsetB,
conv3COCOOffsetR,
conv3COCOGangGains,
conv3COCOGangOffsets,
conv3COCOMode,
out1TotalProcTime,
out2TotalProcTime,
presetsNumber,
presetsActive,
presetsSaveAs,
presetsLoadToCurrent,
presetsName0,
presetsName1,
presetsName2,
presetsName3,
presetsName4,
presetsName5,
presetsName6,
presetsName7,
out1FrameSyncCompensation,
boardID,
eventSDIInput1NoInputSNMP,
eventFanFailureSNMP,
eventHighTemperatureSNMP,
conv3InputStatus,
conv3InSize,
conv3OutSize,
sNumber }
STATUS current
DESCRIPTION "Conformance group containing all device parameters"
::= { conformance 1 }
paramCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance specification"
MODULE -- This module
MANDATORY-GROUPS { paramGroup }
::= { conformance 2 }
END