-- Machine generated MIB file, do not edit!
--
-- MIB file for PMX5212-B-D, type code 06.81, software label 77
-- Generated on Tuesday, 09-Aug-16 10:11:22 UTC
-- CVS $Id: PMX5212-B-D_0681_sw77.mib,v 1.13 2016/08/09 10:11:23 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PMX5212-B-D-0681-sw77-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pmx5212-b-d-0681-sw77 MODULE-IDENTITY
    LAST-UPDATED "201608091011Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PMX5212-B-D, type code 06.81, software label 77"
    REVISION "201608091011Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 1665077 }

pmx5212-b-d-0681 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PMX5212-B-D"
    ::= { products 1665 }

sw77 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 77"
    ::= { pmx5212-b-d-0681 77 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeEmbedder1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        group1(1),
        group2(2),
        group3(3),
        group4(4)
    }

TypeBits ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n20Bit(0),
        n24Bit(1)
    }

TypeSampleRateConversion ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        bypass(0),
        on(1)
    }

TypeInStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        n525(1),
        n625(2),
        invalid(3),
        invalidX(4)
    }

TypeInFormat ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n43(0),
        n169(1),
        nA(2)
    }

TypeInGrp1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        present(0),
        notEmbedded(1),
        nA(2)
    }

TypeInAes1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        invalidX(2),
        async(3),
        present(4),
        unknown(5)
    }

TypeDeleteGroupAll ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        keep(0),
        del(1)
    }

TypeEventnoinputSDISNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventnoinputSDI OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: no input SDI (SDI input signal can not be detected)"
    ::= { paramEntry 14 }

eventinputSDIinvalid OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: input SDI invalid (SDI input signal is no valid SDI)"
    ::= { paramEntry 15 }

eventnoinputAES1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: no input AES 1 (AES 1 input signal can not be detected)"
    ::= { paramEntry 16 }

eventnoinputAES2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: no input AES 2 (AES 2 input signal can not be detected)"
    ::= { paramEntry 17 }

eventinputAES12async OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: input AES 1/2 async (input signal AES 1 or 2 is asynchronous)"
    ::= { paramEntry 18 }

event525videoinput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 525 video input"
    ::= { paramEntry 19 }

event169videoinput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 169 video input"
    ::= { paramEntry 20 }

embedder1 OBJECT-TYPE
    SYNTAX TypeEmbedder1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embedder 1 embedds the AES into the selected group"
    ::= { paramEntry 21 }

bits OBJECT-TYPE
    SYNTAX TypeBits
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "AES Bit Count"
    ::= { paramEntry 22 }

sampleRateConversion OBJECT-TYPE
    SYNTAX TypeSampleRateConversion
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Bypass/Enable SRC (sample rate conversion)"
    ::= { paramEntry 23 }

inStandard OBJECT-TYPE
    SYNTAX TypeInStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input status indication"
    ::= { paramEntry 24 }

inFormat OBJECT-TYPE
    SYNTAX TypeInFormat
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input format indication"
    ::= { paramEntry 25 }

inGrp1 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "indication of group 1 presence in incoming SDI"
    ::= { paramEntry 26 }

inGrp2 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "indication of group 2 presence in incoming SDI"
    ::= { paramEntry 27 }

inGrp3 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "indication of group 3 presence in incoming SDI"
    ::= { paramEntry 28 }

inGrp4 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "indication of group 4 presence in incoming SDI"
    ::= { paramEntry 29 }

inAes1 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 1 presence indication"
    ::= { paramEntry 30 }

inAes2 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 2 presence indication"
    ::= { paramEntry 31 }

deleteGroupAll OBJECT-TYPE
    SYNTAX TypeDeleteGroupAll
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete all embedded audio from incoming SDI before embedding"
    ::= { paramEntry 32 }

alarmEnable1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "missing AES 1 influences alarm status"
    ::= { paramEntry 34 }

alarmEnable2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "missing AES 2 influences alarm status"
    ::= { paramEntry 35 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 36 }

eventnoinputSDISNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputSDISNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: no input SDI (SDI input signal can not be detected)"
    ::= { paramEntry 37 }

eventinputSDIinvalidSNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputSDISNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: input SDI invalid (SDI input signal is no valid SDI)"
    ::= { paramEntry 38 }

eventnoinputAES1SNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputSDISNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: no input AES 1 (AES 1 input signal can not be detected)"
    ::= { paramEntry 39 }

eventnoinputAES2SNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputSDISNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: no input AES 2 (AES 2 input signal can not be detected)"
    ::= { paramEntry 40 }

eventinputAES12asyncSNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputSDISNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: input AES 1/2 async (input signal AES 1 or 2 is asynchronous)"
    ::= { paramEntry 41 }

event525videoinputSNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputSDISNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 525 video input"
    ::= { paramEntry 42 }

event169videoinputSNMP OBJECT-TYPE
    SYNTAX TypeEventnoinputSDISNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 169 video input"
    ::= { paramEntry 43 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 44 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PMX5212-B-D parameters"
    ::= { sw77 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PMX5212-B-D parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventnoinputSDI OnOffValue,
    eventinputSDIinvalid OnOffValue,
    eventnoinputAES1 OnOffValue,
    eventnoinputAES2 OnOffValue,
    eventinputAES12async OnOffValue,
    event525videoinput OnOffValue,
    event169videoinput OnOffValue,
    embedder1 TypeEmbedder1,
    bits TypeBits,
    sampleRateConversion TypeSampleRateConversion,
    inStandard TypeInStandard,
    inFormat TypeInFormat,
    inGrp1 TypeInGrp1,
    inGrp2 TypeInGrp1,
    inGrp3 TypeInGrp1,
    inGrp4 TypeInGrp1,
    inAes1 TypeInAes1,
    inAes2 TypeInAes1,
    deleteGroupAll TypeDeleteGroupAll,
    alarmEnable1 OnOffValue,
    alarmEnable2 OnOffValue,
    boardID Integer32,
    eventnoinputSDISNMP TypeEventnoinputSDISNMP,
    eventinputSDIinvalidSNMP TypeEventnoinputSDISNMP,
    eventnoinputAES1SNMP TypeEventnoinputSDISNMP,
    eventnoinputAES2SNMP TypeEventnoinputSDISNMP,
    eventinputAES12asyncSNMP TypeEventnoinputSDISNMP,
    event525videoinputSNMP TypeEventnoinputSDISNMP,
    event169videoinputSNMP TypeEventnoinputSDISNMP,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PMX5212-B-D"
    ::= { sw77 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventnoinputSDI,
        eventinputSDIinvalid,
        eventnoinputAES1,
        eventnoinputAES2,
        eventinputAES12async,
        event525videoinput,
        event169videoinput,
        embedder1,
        bits,
        sampleRateConversion,
        inStandard,
        inFormat,
        inGrp1,
        inGrp2,
        inGrp3,
        inGrp4,
        inAes1,
        inAes2,
        deleteGroupAll,
        alarmEnable1,
        alarmEnable2,
        boardID,
        eventnoinputSDISNMP,
        eventinputSDIinvalidSNMP,
        eventnoinputAES1SNMP,
        eventnoinputAES2SNMP,
        eventinputAES12asyncSNMP,
        event525videoinputSNMP,
        event169videoinputSNMP,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END