-- Machine generated MIB file, do not edit! -- -- MIB file for PVD5000-G, type code 07.82, software label 104 -- Generated on Tuesday, 09-Aug-16 10:25:51 UTC -- CVS $Id: PVD5000-G_0782_sw104.mib,v 1.11 2016/08/09 10:25:53 jvo Exp $ -- -- Copyright 2003-2016 by LYNX Technik AG -- -- These coded instructions, statements, and computer programs contain -- unpublished proprietary information written by LYNX Technik AG and -- are protected by Federal copyright law. They may not be disclosed -- to third parties or copied or duplicated in any form, in whole or -- in part, without the prior written consent of LYNX Technik AG. -- PVD5000-G-0782-sw104-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578 TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579 MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580 mib-modules, products, FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI; pvd5000-g-0782-sw104 MODULE-IDENTITY LAST-UPDATED "201608091025Z" ORGANIZATION "LYNX Technik AG" CONTACT-INFO "LYNX Technik AG Brunnenweg 3 64331 Weiterstadt http://www.lynx-technik.com mailto:support@lynx-technik.com" DESCRIPTION "MIB module definition for PVD5000-G, type code 07.82, software label 104" REVISION "201608091025Z" DESCRIPTION "Generated by LYNX Asset Database" ::= { mib-modules 1922104 } pvd5000-g-0782 OBJECT-IDENTITY STATUS current DESCRIPTION "LYNX device type PVD5000-G" ::= { products 1922 } sw104 OBJECT-IDENTITY STATUS current DESCRIPTION "Software label 104" ::= { pvd5000-g-0782 104 } -- Type definitions TypeStatusColor ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { unknown(0), black(1), green(2), yellow(3), red(4) } TypeFactoryReset ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { press(0) } TypeReference ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), n525(1), n625(2) } TypeVideoStandard ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { auto(0), n525(1), n625(2) } TypeChannel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { sDI1(0), sDI2(1) } TypeBlanking ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { transparent(0), blanked(1), blankOnFreeze(2) } TypeFreeze ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { field1(0), field2(1), frame(2) } TypeMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { framesync(0), linesync(1) } TypeReferenceSelect ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { externBack(0), internRack(1) } TypeGPI ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), switchInput(1), freezeInput(2) } TypeOnTRSError ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { freeze(0), black(1), transparent(2) } TypeEventnoinputSDI1SNMP ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), onOnly(1), offOnly(2), onOff(3) } -- Parameter definitions typeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "LYNX product type name" ::= { paramEntry 1 } displayName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller" ::= { paramEntry 2 } position OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)" ::= { paramEntry 3 } uptime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Connection time of the device to this UI (in seconds)" ::= { paramEntry 4 } type OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device type code" ::= { paramEntry 5 } version OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device version information" ::= { paramEntry 6 } statusColor OBJECT-TYPE SYNTAX TypeStatusColor MAX-ACCESS read-only STATUS current DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)" ::= { paramEntry 7 } statusColorRGB OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current color of the Devices Master LED as #RRGGBB" ::= { paramEntry 8 } statusText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current status text (OK or error-details)" ::= { paramEntry 9 } factoryReset OBJECT-TYPE SYNTAX TypeFactoryReset MAX-ACCESS read-write STATUS current DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)" ::= { paramEntry 10 } lock OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Lock Device" ::= { paramEntry 11 } locate OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF" ::= { paramEntry 12 } eventnoinputSDI1 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: no input SDI 1 (SDI 1 input signal can not be detected)" ::= { paramEntry 14 } eventnoinputSDI2 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: no input SDI 2 (SDI 2 input signal can not be detected)" ::= { paramEntry 15 } eventnoreference OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: no reference (reference input signal can not be detected)" ::= { paramEntry 16 } eventstandardmismatch OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: standard mismatch (standard mismatch between reference and SDI input)" ::= { paramEntry 17 } event525videoreference OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Debug Event: 525 video reference (525 video reference)" ::= { paramEntry 18 } event525videoinput1 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Debug Event: 525 video input 1 (525 video input 1)" ::= { paramEntry 19 } event525videoinput2 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Debug Event: 525 video input 2 (525 video input 2)" ::= { paramEntry 20 } reference OBJECT-TYPE SYNTAX TypeReference MAX-ACCESS read-only STATUS current DESCRIPTION "Reference input standard" ::= { paramEntry 22 } channel1 OBJECT-TYPE SYNTAX TypeReference MAX-ACCESS read-only STATUS current DESCRIPTION "SDI Input 1 signal standard" ::= { paramEntry 23 } channel2 OBJECT-TYPE SYNTAX TypeReference MAX-ACCESS read-only STATUS current DESCRIPTION "SDI Input 2 signal standard" ::= { paramEntry 24 } videoStandard OBJECT-TYPE SYNTAX TypeVideoStandard MAX-ACCESS read-write STATUS current DESCRIPTION "output signal standard" ::= { paramEntry 25 } channel OBJECT-TYPE SYNTAX TypeChannel MAX-ACCESS read-write STATUS current DESCRIPTION "select current input channel" ::= { paramEntry 26 } delayFrame OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in Frames. Combined with DelayLine and DelayPixel for total delay" ::= { paramEntry 27 } delayLine OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in Lines. Combined with DelayFrame and DelayPixel for total delay" ::= { paramEntry 28 } delayPixel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in Pixel. Combined with DelayFrame and DelayLine for total delay" ::= { paramEntry 29 } delayUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "total delay in us" ::= { paramEntry 31 } delayNormalize OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "delay normalize display" ::= { paramEntry 32 } blanking OBJECT-TYPE SYNTAX TypeBlanking MAX-ACCESS read-write STATUS current DESCRIPTION "Select vertical blanking mode" ::= { paramEntry 39 } freeze OBJECT-TYPE SYNTAX TypeFreeze MAX-ACCESS read-write STATUS current DESCRIPTION "Specify output freeze mode" ::= { paramEntry 40 } mode OBJECT-TYPE SYNTAX TypeMode MAX-ACCESS read-write STATUS current DESCRIPTION "General mode of operation (Frame- vs. Line-Synchronizer)" ::= { paramEntry 41 } referenceSelect OBJECT-TYPE SYNTAX TypeReferenceSelect MAX-ACCESS read-write STATUS current DESCRIPTION "select Reference Source (local device Backpanel or Rack-internal distribution)" ::= { paramEntry 42 } gPI OBJECT-TYPE SYNTAX TypeGPI MAX-ACCESS read-write STATUS current DESCRIPTION "Specify function of GPI input" ::= { paramEntry 43 } wSS OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Wide Screen Signalling according to EN 300 294" ::= { paramEntry 44 } brightness OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "modify video Brightness" ::= { paramEntry 45 } saturation OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "modify video Saturation" ::= { paramEntry 46 } pedestal OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "modify video Pedestal" ::= { paramEntry 47 } hue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "modify video Hue" ::= { paramEntry 48 } onTRSError OBJECT-TYPE SYNTAX TypeOnTRSError MAX-ACCESS read-write STATUS current DESCRIPTION "Select behaviour of output in case of TRS errors on current input" ::= { paramEntry 51 } boardID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "BoardID" ::= { paramEntry 52 } eventnoinputSDI1SNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: no input SDI 1 (SDI 1 input signal can not be detected)" ::= { paramEntry 53 } eventnoinputSDI2SNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: no input SDI 2 (SDI 2 input signal can not be detected)" ::= { paramEntry 54 } eventnoreferenceSNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: no reference (reference input signal can not be detected)" ::= { paramEntry 55 } eventstandardmismatchSNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: standard mismatch (standard mismatch between reference and SDI input)" ::= { paramEntry 56 } event525videoreferenceSNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: 525 video reference (525 video reference)" ::= { paramEntry 57 } event525videoinput1SNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: 525 video input 1 (525 video input 1)" ::= { paramEntry 58 } event525videoinput2SNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: 525 video input 2 (525 video input 2)" ::= { paramEntry 59 } sNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Number" ::= { paramEntry 60 } -- Parameter table paramTable OBJECT-TYPE SYNTAX SEQUENCE OF ParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of PVD5000-G parameters" ::= { sw104 1 } paramEntry OBJECT-TYPE SYNTAX ParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the table of PVD5000-G parameters" INDEX { IMPLIED position } ::= { paramTable 1 } ParamEntry ::= SEQUENCE { typeName DisplayString, displayName DisplayString, position OCTET STRING, uptime TimeTicks, type DisplayString, version DisplayString, statusColor TypeStatusColor, statusColorRGB DisplayString, statusText DisplayString, factoryReset TypeFactoryReset, lock OnOffValue, locate OnOffValue, eventnoinputSDI1 OnOffValue, eventnoinputSDI2 OnOffValue, eventnoreference OnOffValue, eventstandardmismatch OnOffValue, event525videoreference OnOffValue, event525videoinput1 OnOffValue, event525videoinput2 OnOffValue, reference TypeReference, channel1 TypeReference, channel2 TypeReference, videoStandard TypeVideoStandard, channel TypeChannel, delayFrame Integer32, delayLine Integer32, delayPixel Integer32, delayUs Integer32, delayNormalize OnOffValue, blanking TypeBlanking, freeze TypeFreeze, mode TypeMode, referenceSelect TypeReferenceSelect, gPI TypeGPI, wSS OnOffValue, brightness FixedPointValue1, saturation FixedPointValue1, pedestal FixedPointValue1, hue Integer32, onTRSError TypeOnTRSError, boardID Integer32, eventnoinputSDI1SNMP TypeEventnoinputSDI1SNMP, eventnoinputSDI2SNMP TypeEventnoinputSDI1SNMP, eventnoreferenceSNMP TypeEventnoinputSDI1SNMP, eventstandardmismatchSNMP TypeEventnoinputSDI1SNMP, event525videoreferenceSNMP TypeEventnoinputSDI1SNMP, event525videoinput1SNMP TypeEventnoinputSDI1SNMP, event525videoinput2SNMP TypeEventnoinputSDI1SNMP, sNumber DisplayString } -- Conformance statements conformance OBJECT-IDENTITY STATUS current DESCRIPTION "Conformance declaration of PVD5000-G" ::= { sw104 2 } paramGroup OBJECT-GROUP OBJECTS { typeName, displayName, position, uptime, type, version, statusColor, statusColorRGB, statusText, factoryReset, lock, locate, eventnoinputSDI1, eventnoinputSDI2, eventnoreference, eventstandardmismatch, event525videoreference, event525videoinput1, event525videoinput2, reference, channel1, channel2, videoStandard, channel, delayFrame, delayLine, delayPixel, delayUs, delayNormalize, blanking, freeze, mode, referenceSelect, gPI, wSS, brightness, saturation, pedestal, hue, onTRSError, boardID, eventnoinputSDI1SNMP, eventnoinputSDI2SNMP, eventnoreferenceSNMP, eventstandardmismatchSNMP, event525videoreferenceSNMP, event525videoinput1SNMP, event525videoinput2SNMP, sNumber } STATUS current DESCRIPTION "Conformance group containing all device parameters" ::= { conformance 1 } paramCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance specification" MODULE -- This module MANDATORY-GROUPS { paramGroup } ::= { conformance 2 } END