-- Machine generated MIB file, do not edit! -- -- MIB file for PVD5010-B-BG, type code 07.8B, software label 138 -- Generated on Tuesday, 09-Aug-16 10:39:17 UTC -- CVS $Id: PVD5010-B-BG_078b_sw138.mib,v 1.12 2016/08/09 10:39:21 jvo Exp $ -- -- Copyright 2003-2016 by LYNX Technik AG -- -- These coded instructions, statements, and computer programs contain -- unpublished proprietary information written by LYNX Technik AG and -- are protected by Federal copyright law. They may not be disclosed -- to third parties or copied or duplicated in any form, in whole or -- in part, without the prior written consent of LYNX Technik AG. -- PVD5010-B-BG-078b-sw138-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578 TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579 MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580 mib-modules, products, FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI; pvd5010-b-bg-078b-sw138 MODULE-IDENTITY LAST-UPDATED "201608091039Z" ORGANIZATION "LYNX Technik AG" CONTACT-INFO "LYNX Technik AG Brunnenweg 3 64331 Weiterstadt http://www.lynx-technik.com mailto:support@lynx-technik.com" DESCRIPTION "MIB module definition for PVD5010-B-BG, type code 07.8B, software label 138" REVISION "201608091039Z" DESCRIPTION "Generated by LYNX Asset Database" ::= { mib-modules 1931138 } pvd5010-b-bg-078b OBJECT-IDENTITY STATUS current DESCRIPTION "LYNX device type PVD5010-B-BG" ::= { products 1931 } sw138 OBJECT-IDENTITY STATUS current DESCRIPTION "Software label 138" ::= { pvd5010-b-bg-078b 138 } -- Type definitions TypeStatusColor ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { unknown(0), black(1), green(2), yellow(3), red(4) } TypeFactoryReset ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { press(0) } TypeReference ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), n525(1), n625(2) } TypeVideoStandard ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { auto(0), n525(1), n625(2) } TypeChannel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { sDI1(0), sDI2(1) } TypeBlanking ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { transparent(0), blanked(1), blankAudioOnly(2) } TypeFreeze ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { field1(0), field2(1), frame(2) } TypeMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { framesync(0), linesync(1) } TypeReferenceSelect ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { externBack(0), internRack(1) } TypeGPI ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), switchInput(1), freezeInput(2), freezeVideoOnly(3), switchDelay(4) } TypeA1IN ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), sDI1(1), sDI2(2), aES1(3), aES2(4) } TypeA1GRP ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), gRP1a(1), gRP2a(2), gRP3a(3), gRP4a(4), gRP1b(5), gRP2b(6), gRP3b(7), gRP4b(8) } TypeDemux1 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), group1(1), group2(2), group3(3), group4(4) } TypeDemuxPresence11 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { notPresent(0), present(1) } TypeSourceStream1 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { aES1(0), aES2(1), dMX11(2), dMX12(3), dMX21(4), dMX22(5) } TypeSourceAESOut1 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { stream1(0), stream2(1), stream3(2), stream4(3), mute(4) } TypeMux1Bit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { n20(0), n24(1) } TypeA1OUT ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), gRP1(1), gRP2(2), gRP3(3), gRP4(4) } TypeA1AUX ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), aUX1(1), aUX2(2), aUX12(3) } TypeSplit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { off(0), on(1), blackLine(2) } TypeOnTRSError ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { freeze(0), black(1), transparent(2) } TypeEventnoinputSDI1SNMP ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration" SYNTAX INTEGER { none(0), onOnly(1), offOnly(2), onOff(3) } -- Parameter definitions typeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "LYNX product type name" ::= { paramEntry 1 } displayName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller" ::= { paramEntry 2 } position OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)" ::= { paramEntry 3 } uptime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Connection time of the device to this UI (in seconds)" ::= { paramEntry 4 } type OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device type code" ::= { paramEntry 5 } version OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device version information" ::= { paramEntry 6 } statusColor OBJECT-TYPE SYNTAX TypeStatusColor MAX-ACCESS read-only STATUS current DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)" ::= { paramEntry 7 } statusColorRGB OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current color of the Devices Master LED as #RRGGBB" ::= { paramEntry 8 } statusText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current status text (OK or error-details)" ::= { paramEntry 9 } factoryReset OBJECT-TYPE SYNTAX TypeFactoryReset MAX-ACCESS read-write STATUS current DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)" ::= { paramEntry 10 } lock OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Lock Device" ::= { paramEntry 11 } locate OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF" ::= { paramEntry 12 } eventnoinputSDI1 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: no input SDI 1 (SDI 1 input signal can not be detected)" ::= { paramEntry 14 } eventnoinputSDI2 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: no input SDI 2 (SDI 2 input signal can not be detected)" ::= { paramEntry 15 } eventnoreference OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: no reference (reference input signal can not be detected)" ::= { paramEntry 16 } eventstandardmismatch OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: standard mismatch (standard mismatch between reference and SDI input)" ::= { paramEntry 17 } eventAESgainoverflow OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Error Event: AES gain overflow (overflow in AES gain processing)" ::= { paramEntry 18 } event525videoreference OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Debug Event: 525 video reference (525 video reference)" ::= { paramEntry 19 } event525videoinput1 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Debug Event: 525 video input 1 (525 video input 1)" ::= { paramEntry 20 } event525videoinput2 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-only STATUS current DESCRIPTION "Debug Event: 525 video input 2 (525 video input 2)" ::= { paramEntry 21 } reference OBJECT-TYPE SYNTAX TypeReference MAX-ACCESS read-only STATUS current DESCRIPTION "Reference input standard" ::= { paramEntry 23 } channel1 OBJECT-TYPE SYNTAX TypeReference MAX-ACCESS read-only STATUS current DESCRIPTION "SDI Input 1 signal standard" ::= { paramEntry 24 } channel2 OBJECT-TYPE SYNTAX TypeReference MAX-ACCESS read-only STATUS current DESCRIPTION "SDI Input 2 signal standard" ::= { paramEntry 25 } videoStandard OBJECT-TYPE SYNTAX TypeVideoStandard MAX-ACCESS read-write STATUS current DESCRIPTION "output signal standard" ::= { paramEntry 26 } channel OBJECT-TYPE SYNTAX TypeChannel MAX-ACCESS read-write STATUS current DESCRIPTION "select current input channel" ::= { paramEntry 27 } delayFrame OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in Frames. Combined with DelayLine and DelayPixel for total delay" ::= { paramEntry 28 } delayLine OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in Lines. Combined with DelayFrame and DelayPixel for total delay" ::= { paramEntry 29 } delayPixel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in Pixel. Combined with DelayFrame and DelayLine for total delay" ::= { paramEntry 30 } delayUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "total delay in us" ::= { paramEntry 32 } delayNormalize OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "delay normalize display" ::= { paramEntry 33 } delayFrameGPI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in Frames (second delay, enabled by GPI). Combined with DelayLine and DelayPixel for total delay (second delay, enabled by GPI)" ::= { paramEntry 34 } delayLineGPI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in Lines (second delay, enabled by GPI). Combined with DelayFrame and DelayPixel for total delay (second delay, enabled by GPI)" ::= { paramEntry 35 } delayPixelGPI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in Pixel (second delay, enabled by GPI). Combined with DelayFrame and DelayLine for total delay (second delay, enabled by GPI)" ::= { paramEntry 36 } delayUsGPI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "total delay in us (second delay, enabled by GPI)" ::= { paramEntry 38 } delayNormalizeGPI OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "delay normalize display (second delay, enabled by GPI)" ::= { paramEntry 39 } blanking OBJECT-TYPE SYNTAX TypeBlanking MAX-ACCESS read-write STATUS current DESCRIPTION "Select vertical blanking mode" ::= { paramEntry 40 } freeze OBJECT-TYPE SYNTAX TypeFreeze MAX-ACCESS read-write STATUS current DESCRIPTION "Specify output freeze mode" ::= { paramEntry 41 } mode OBJECT-TYPE SYNTAX TypeMode MAX-ACCESS read-write STATUS current DESCRIPTION "General mode of operation (Frame- vs. Line-Synchronizer)" ::= { paramEntry 42 } referenceSelect OBJECT-TYPE SYNTAX TypeReferenceSelect MAX-ACCESS read-write STATUS current DESCRIPTION "select Reference Source (local device Backpanel or Rack-internal distribution)" ::= { paramEntry 43 } gPI OBJECT-TYPE SYNTAX TypeGPI MAX-ACCESS read-write STATUS current DESCRIPTION "Specify function of GPI input" ::= { paramEntry 44 } wSS OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Wide Screen Signalling according to EN 300 294" ::= { paramEntry 45 } brightness OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "modify video Brightness" ::= { paramEntry 46 } saturation OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "modify video Saturation" ::= { paramEntry 47 } pedestal OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "modify video Pedestal" ::= { paramEntry 48 } hue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "modify video Hue" ::= { paramEntry 49 } a1IN OBJECT-TYPE SYNTAX TypeA1IN MAX-ACCESS read-write STATUS current DESCRIPTION "Select signal source for internal AES stream 1" ::= { paramEntry 50 } a1GRP OBJECT-TYPE SYNTAX TypeA1GRP MAX-ACCESS read-write STATUS current DESCRIPTION "Select group to deembed AES from for internal AES stream 1" ::= { paramEntry 51 } a2IN OBJECT-TYPE SYNTAX TypeA1IN MAX-ACCESS read-write STATUS current DESCRIPTION "Select signal source for internal AES stream 2" ::= { paramEntry 52 } a2GRP OBJECT-TYPE SYNTAX TypeA1GRP MAX-ACCESS read-write STATUS current DESCRIPTION "Select group to deembed AES from for internal AES stream 2" ::= { paramEntry 53 } a3IN OBJECT-TYPE SYNTAX TypeA1IN MAX-ACCESS read-write STATUS current DESCRIPTION "Select signal source for internal AES stream 3" ::= { paramEntry 54 } a3GRP OBJECT-TYPE SYNTAX TypeA1GRP MAX-ACCESS read-write STATUS current DESCRIPTION "Select group to deembed AES from for internal AES stream 3" ::= { paramEntry 55 } a4IN OBJECT-TYPE SYNTAX TypeA1IN MAX-ACCESS read-write STATUS current DESCRIPTION "Select signal source for internal AES stream 4" ::= { paramEntry 56 } a4GRP OBJECT-TYPE SYNTAX TypeA1GRP MAX-ACCESS read-write STATUS current DESCRIPTION "Select group to deembed AES from for internal AES stream 4" ::= { paramEntry 57 } sourceDemux1 OBJECT-TYPE SYNTAX TypeChannel MAX-ACCESS read-write STATUS current DESCRIPTION "SDI source for Demux unit no. 1 (SDI1 or SDI2)" ::= { paramEntry 58 } sourceDemux2 OBJECT-TYPE SYNTAX TypeChannel MAX-ACCESS read-write STATUS current DESCRIPTION "SDI source for Demux unit no. 2 (SDI1 or SDI2)" ::= { paramEntry 59 } demux1 OBJECT-TYPE SYNTAX TypeDemux1 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify which group to deembed in Deembedder (Demux) 1" ::= { paramEntry 60 } demux2 OBJECT-TYPE SYNTAX TypeDemux1 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify which group to deembed in Deembedder (Demux) 2" ::= { paramEntry 61 } demuxPresence11 OBJECT-TYPE SYNTAX TypeDemuxPresence11 MAX-ACCESS read-only STATUS current DESCRIPTION "presence information deembedder 1, group 1" ::= { paramEntry 62 } demuxPresence21 OBJECT-TYPE SYNTAX TypeDemuxPresence11 MAX-ACCESS read-only STATUS current DESCRIPTION "presence information deembedder 2, group 1" ::= { paramEntry 63 } demuxPresence12 OBJECT-TYPE SYNTAX TypeDemuxPresence11 MAX-ACCESS read-only STATUS current DESCRIPTION "presence information deembedder 1, group 2" ::= { paramEntry 64 } demuxPresence22 OBJECT-TYPE SYNTAX TypeDemuxPresence11 MAX-ACCESS read-only STATUS current DESCRIPTION "presence information deembedder 2, group 2" ::= { paramEntry 65 } demuxPresence13 OBJECT-TYPE SYNTAX TypeDemuxPresence11 MAX-ACCESS read-only STATUS current DESCRIPTION "presence information deembedder 1, group 3" ::= { paramEntry 66 } demuxPresence23 OBJECT-TYPE SYNTAX TypeDemuxPresence11 MAX-ACCESS read-only STATUS current DESCRIPTION "presence information deembedder 2, group 3" ::= { paramEntry 67 } demuxPresence14 OBJECT-TYPE SYNTAX TypeDemuxPresence11 MAX-ACCESS read-only STATUS current DESCRIPTION "presence information deembedder 1, group 4" ::= { paramEntry 68 } demuxPresence24 OBJECT-TYPE SYNTAX TypeDemuxPresence11 MAX-ACCESS read-only STATUS current DESCRIPTION "presence information deembedder 2, group 4" ::= { paramEntry 69 } sourceStream1 OBJECT-TYPE SYNTAX TypeSourceStream1 MAX-ACCESS read-write STATUS current DESCRIPTION "source for internal audio stream 1" ::= { paramEntry 70 } sourceStream2 OBJECT-TYPE SYNTAX TypeSourceStream1 MAX-ACCESS read-write STATUS current DESCRIPTION "source for internal audio stream 2" ::= { paramEntry 71 } sourceStream3 OBJECT-TYPE SYNTAX TypeSourceStream1 MAX-ACCESS read-write STATUS current DESCRIPTION "source for internal audio stream 3" ::= { paramEntry 72 } sourceStream4 OBJECT-TYPE SYNTAX TypeSourceStream1 MAX-ACCESS read-write STATUS current DESCRIPTION "source for internal audio stream 4" ::= { paramEntry 73 } sourceAESOut1 OBJECT-TYPE SYNTAX TypeSourceAESOut1 MAX-ACCESS read-write STATUS current DESCRIPTION "source for AES out 1" ::= { paramEntry 74 } sourceAESOut2 OBJECT-TYPE SYNTAX TypeSourceAESOut1 MAX-ACCESS read-write STATUS current DESCRIPTION "source for AES out 2" ::= { paramEntry 75 } mux1Group OBJECT-TYPE SYNTAX TypeDemux1 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify which group to use in Embedder (Mux) 1" ::= { paramEntry 76 } mux1Bit OBJECT-TYPE SYNTAX TypeMux1Bit MAX-ACCESS read-write STATUS current DESCRIPTION "Specify if Embedder (Mux) 1 uses 20 or 24 Bit" ::= { paramEntry 77 } mux2Group OBJECT-TYPE SYNTAX TypeDemux1 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify which group to use in Embedder (Mux) 2" ::= { paramEntry 78 } mux2Bit OBJECT-TYPE SYNTAX TypeMux1Bit MAX-ACCESS read-write STATUS current DESCRIPTION "Specify if Embedder (Mux) 2 uses 20 or 24 Bit" ::= { paramEntry 79 } gain11 OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "audio gain, internal channel 1.1" ::= { paramEntry 80 } gain12 OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "audio gain, internal channel 1.2" ::= { paramEntry 81 } gain21 OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "audio gain, internal channel 2.1" ::= { paramEntry 82 } gain22 OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "audio gain, internal channel 2.2" ::= { paramEntry 83 } gain31 OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "audio gain, internal channel 3.1" ::= { paramEntry 84 } gain32 OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "audio gain, internal channel 3.2" ::= { paramEntry 85 } gain41 OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "audio gain, internal channel 4.1" ::= { paramEntry 86 } gain42 OBJECT-TYPE SYNTAX FixedPointValue1 MAX-ACCESS read-write STATUS current DESCRIPTION "audio gain, internal channel 4.2" ::= { paramEntry 87 } gangGains1 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Gang-Mode: Couple the two gain values (L+R) of internal channel 1 (modify them synchronously, as a stereo-pair)" ::= { paramEntry 88 } gangGains2 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Gang-Mode: Couple the two gain values (L+R) of internal channel 2 (modify them synchronously, as a stereo-pair)" ::= { paramEntry 89 } gangGains3 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Gang-Mode: Couple the two gain values (L+R) of internal channel 3 (modify them synchronously, as a stereo-pair)" ::= { paramEntry 90 } gangGains4 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Gang-Mode: Couple the two gain values (L+R) of internal channel 4 (modify them synchronously, as a stereo-pair)" ::= { paramEntry 91 } mute11 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio mute, internal channel 1.1" ::= { paramEntry 92 } mute12 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio mute, internal channel 1.2" ::= { paramEntry 93 } mute21 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio mute, internal channel 2.1" ::= { paramEntry 94 } mute22 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio mute, internal channel 2.2" ::= { paramEntry 95 } mute31 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio mute, internal channel 3.1" ::= { paramEntry 96 } mute32 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio mute, internal channel 3.2" ::= { paramEntry 97 } mute41 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio mute, internal channel 4.1" ::= { paramEntry 98 } mute42 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio mute, internal channel 4.2" ::= { paramEntry 99 } invert11 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio invert, internal channel 1.1" ::= { paramEntry 100 } invert12 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio invert, internal channel 1.2" ::= { paramEntry 101 } invert21 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio invert, internal channel 2.1" ::= { paramEntry 102 } invert22 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio invert, internal channel 2.2" ::= { paramEntry 103 } invert31 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio invert, internal channel 3.1" ::= { paramEntry 104 } invert32 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio invert, internal channel 3.2" ::= { paramEntry 105 } invert41 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio invert, internal channel 4.1" ::= { paramEntry 106 } invert42 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio invert, internal channel 4.2" ::= { paramEntry 107 } swap1 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio swap, internal channel 1" ::= { paramEntry 108 } swap2 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio swap, internal channel 2" ::= { paramEntry 109 } swap3 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio swap, internal channel 3" ::= { paramEntry 110 } swap4 OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "audio swap, internal channel 4" ::= { paramEntry 111 } a1OUT OBJECT-TYPE SYNTAX TypeA1OUT MAX-ACCESS read-write STATUS current DESCRIPTION "Select group to embed internal AES stream 1 into" ::= { paramEntry 112 } a1AUX OBJECT-TYPE SYNTAX TypeA1AUX MAX-ACCESS read-write STATUS current DESCRIPTION "Select external AES output to feed internal AES stream 1 into" ::= { paramEntry 113 } a2OUT OBJECT-TYPE SYNTAX TypeA1OUT MAX-ACCESS read-write STATUS current DESCRIPTION "Select group to embed internal AES stream 2 into" ::= { paramEntry 114 } a2AUX OBJECT-TYPE SYNTAX TypeA1AUX MAX-ACCESS read-write STATUS current DESCRIPTION "Select external AES output to feed internal AES stream 2 into" ::= { paramEntry 115 } a3OUT OBJECT-TYPE SYNTAX TypeA1OUT MAX-ACCESS read-write STATUS current DESCRIPTION "Select group to embed internal AES stream 3 into" ::= { paramEntry 116 } a3AUX OBJECT-TYPE SYNTAX TypeA1AUX MAX-ACCESS read-write STATUS current DESCRIPTION "Select external AES output to feed internal AES stream 3 into" ::= { paramEntry 117 } a4OUT OBJECT-TYPE SYNTAX TypeA1OUT MAX-ACCESS read-write STATUS current DESCRIPTION "Select group to embed internal AES stream 4 into" ::= { paramEntry 118 } a4AUX OBJECT-TYPE SYNTAX TypeA1AUX MAX-ACCESS read-write STATUS current DESCRIPTION "Select external AES output to feed internal AES stream 4 into" ::= { paramEntry 119 } split OBJECT-TYPE SYNTAX TypeSplit MAX-ACCESS read-write STATUS current DESCRIPTION "Options for Vertical Split on/off/on with separating black line (this selection is available only if option P_VD_VSPLIT is enabled)" ::= { paramEntry 120 } splitPos OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "line number at which to split image" ::= { paramEntry 121 } onTRSError OBJECT-TYPE SYNTAX TypeOnTRSError MAX-ACCESS read-write STATUS current DESCRIPTION "Select behaviour of output in case of TRS errors on current input" ::= { paramEntry 122 } syncSDIIn OBJECT-TYPE SYNTAX OnOffValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed). This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched. NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path." ::= { paramEntry 123 } boardID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "BoardID" ::= { paramEntry 124 } eventnoinputSDI1SNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: no input SDI 1 (SDI 1 input signal can not be detected)" ::= { paramEntry 125 } eventnoinputSDI2SNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: no input SDI 2 (SDI 2 input signal can not be detected)" ::= { paramEntry 126 } eventnoreferenceSNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: no reference (reference input signal can not be detected)" ::= { paramEntry 127 } eventstandardmismatchSNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: standard mismatch (standard mismatch between reference and SDI input)" ::= { paramEntry 128 } eventAESgainoverflowSNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: AES gain overflow (overflow in AES gain processing)" ::= { paramEntry 129 } event525videoreferenceSNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: 525 video reference (525 video reference)" ::= { paramEntry 130 } event525videoinput1SNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: 525 video input 1 (525 video input 1)" ::= { paramEntry 131 } event525videoinput2SNMP OBJECT-TYPE SYNTAX TypeEventnoinputSDI1SNMP MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap for Event: 525 video input 2 (525 video input 2)" ::= { paramEntry 132 } sNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Number" ::= { paramEntry 133 } -- Parameter table paramTable OBJECT-TYPE SYNTAX SEQUENCE OF ParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of PVD5010-B-BG parameters" ::= { sw138 1 } paramEntry OBJECT-TYPE SYNTAX ParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the table of PVD5010-B-BG parameters" INDEX { IMPLIED position } ::= { paramTable 1 } ParamEntry ::= SEQUENCE { typeName DisplayString, displayName DisplayString, position OCTET STRING, uptime TimeTicks, type DisplayString, version DisplayString, statusColor TypeStatusColor, statusColorRGB DisplayString, statusText DisplayString, factoryReset TypeFactoryReset, lock OnOffValue, locate OnOffValue, eventnoinputSDI1 OnOffValue, eventnoinputSDI2 OnOffValue, eventnoreference OnOffValue, eventstandardmismatch OnOffValue, eventAESgainoverflow OnOffValue, event525videoreference OnOffValue, event525videoinput1 OnOffValue, event525videoinput2 OnOffValue, reference TypeReference, channel1 TypeReference, channel2 TypeReference, videoStandard TypeVideoStandard, channel TypeChannel, delayFrame Integer32, delayLine Integer32, delayPixel Integer32, delayUs Integer32, delayNormalize OnOffValue, delayFrameGPI Integer32, delayLineGPI Integer32, delayPixelGPI Integer32, delayUsGPI Integer32, delayNormalizeGPI OnOffValue, blanking TypeBlanking, freeze TypeFreeze, mode TypeMode, referenceSelect TypeReferenceSelect, gPI TypeGPI, wSS OnOffValue, brightness FixedPointValue1, saturation FixedPointValue1, pedestal FixedPointValue1, hue Integer32, a1IN TypeA1IN, a1GRP TypeA1GRP, a2IN TypeA1IN, a2GRP TypeA1GRP, a3IN TypeA1IN, a3GRP TypeA1GRP, a4IN TypeA1IN, a4GRP TypeA1GRP, sourceDemux1 TypeChannel, sourceDemux2 TypeChannel, demux1 TypeDemux1, demux2 TypeDemux1, demuxPresence11 TypeDemuxPresence11, demuxPresence21 TypeDemuxPresence11, demuxPresence12 TypeDemuxPresence11, demuxPresence22 TypeDemuxPresence11, demuxPresence13 TypeDemuxPresence11, demuxPresence23 TypeDemuxPresence11, demuxPresence14 TypeDemuxPresence11, demuxPresence24 TypeDemuxPresence11, sourceStream1 TypeSourceStream1, sourceStream2 TypeSourceStream1, sourceStream3 TypeSourceStream1, sourceStream4 TypeSourceStream1, sourceAESOut1 TypeSourceAESOut1, sourceAESOut2 TypeSourceAESOut1, mux1Group TypeDemux1, mux1Bit TypeMux1Bit, mux2Group TypeDemux1, mux2Bit TypeMux1Bit, gain11 FixedPointValue1, gain12 FixedPointValue1, gain21 FixedPointValue1, gain22 FixedPointValue1, gain31 FixedPointValue1, gain32 FixedPointValue1, gain41 FixedPointValue1, gain42 FixedPointValue1, gangGains1 OnOffValue, gangGains2 OnOffValue, gangGains3 OnOffValue, gangGains4 OnOffValue, mute11 OnOffValue, mute12 OnOffValue, mute21 OnOffValue, mute22 OnOffValue, mute31 OnOffValue, mute32 OnOffValue, mute41 OnOffValue, mute42 OnOffValue, invert11 OnOffValue, invert12 OnOffValue, invert21 OnOffValue, invert22 OnOffValue, invert31 OnOffValue, invert32 OnOffValue, invert41 OnOffValue, invert42 OnOffValue, swap1 OnOffValue, swap2 OnOffValue, swap3 OnOffValue, swap4 OnOffValue, a1OUT TypeA1OUT, a1AUX TypeA1AUX, a2OUT TypeA1OUT, a2AUX TypeA1AUX, a3OUT TypeA1OUT, a3AUX TypeA1AUX, a4OUT TypeA1OUT, a4AUX TypeA1AUX, split TypeSplit, splitPos Integer32, onTRSError TypeOnTRSError, syncSDIIn OnOffValue, boardID Integer32, eventnoinputSDI1SNMP TypeEventnoinputSDI1SNMP, eventnoinputSDI2SNMP TypeEventnoinputSDI1SNMP, eventnoreferenceSNMP TypeEventnoinputSDI1SNMP, eventstandardmismatchSNMP TypeEventnoinputSDI1SNMP, eventAESgainoverflowSNMP TypeEventnoinputSDI1SNMP, event525videoreferenceSNMP TypeEventnoinputSDI1SNMP, event525videoinput1SNMP TypeEventnoinputSDI1SNMP, event525videoinput2SNMP TypeEventnoinputSDI1SNMP, sNumber DisplayString } -- Conformance statements conformance OBJECT-IDENTITY STATUS current DESCRIPTION "Conformance declaration of PVD5010-B-BG" ::= { sw138 2 } paramGroup OBJECT-GROUP OBJECTS { typeName, displayName, position, uptime, type, version, statusColor, statusColorRGB, statusText, factoryReset, lock, locate, eventnoinputSDI1, eventnoinputSDI2, eventnoreference, eventstandardmismatch, eventAESgainoverflow, event525videoreference, event525videoinput1, event525videoinput2, reference, channel1, channel2, videoStandard, channel, delayFrame, delayLine, delayPixel, delayUs, delayNormalize, delayFrameGPI, delayLineGPI, delayPixelGPI, delayUsGPI, delayNormalizeGPI, blanking, freeze, mode, referenceSelect, gPI, wSS, brightness, saturation, pedestal, hue, a1IN, a1GRP, a2IN, a2GRP, a3IN, a3GRP, a4IN, a4GRP, sourceDemux1, sourceDemux2, demux1, demux2, demuxPresence11, demuxPresence21, demuxPresence12, demuxPresence22, demuxPresence13, demuxPresence23, demuxPresence14, demuxPresence24, sourceStream1, sourceStream2, sourceStream3, sourceStream4, sourceAESOut1, sourceAESOut2, mux1Group, mux1Bit, mux2Group, mux2Bit, gain11, gain12, gain21, gain22, gain31, gain32, gain41, gain42, gangGains1, gangGains2, gangGains3, gangGains4, mute11, mute12, mute21, mute22, mute31, mute32, mute41, mute42, invert11, invert12, invert21, invert22, invert31, invert32, invert41, invert42, swap1, swap2, swap3, swap4, a1OUT, a1AUX, a2OUT, a2AUX, a3OUT, a3AUX, a4OUT, a4AUX, split, splitPos, onTRSError, syncSDIIn, boardID, eventnoinputSDI1SNMP, eventnoinputSDI2SNMP, eventnoreferenceSNMP, eventstandardmismatchSNMP, eventAESgainoverflowSNMP, event525videoreferenceSNMP, event525videoinput1SNMP, event525videoinput2SNMP, sNumber } STATUS current DESCRIPTION "Conformance group containing all device parameters" ::= { conformance 1 } paramCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance specification" MODULE -- This module MANDATORY-GROUPS { paramGroup } ::= { conformance 2 } END