-- Machine generated MIB file, do not edit!
--
-- MIB file for PVD5600, type code 07.C2, software label 197
-- Generated on Tuesday, 09-Aug-16 11:00:26 UTC
-- CVS $Id: PVD5600_07c2_sw197.mib,v 1.16 2016/08/09 11:00:28 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PVD5600-07c2-sw197-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pvd5600-07c2-sw197 MODULE-IDENTITY
    LAST-UPDATED "201608091100Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PVD5600, type code 07.C2, software label 197"
    REVISION "201608091100Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 1986197 }

pvd5600-07c2 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PVD5600"
    ::= { products 1986 }

sw197 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 197"
    ::= { pvd5600-07c2 197 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeReferenceLock ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lockToRefIn(0),
        lockToSDI1(1)
    }

TypeReferenceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n1080i60(7),
        n1080i5994(8),
        n1080i50(9)
    }

TypeReferenceSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        externBoard(0),
        internRack(1)
    }

TypeFreqPreselect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n60Hz(0),
        n5994Hz(1),
        n50Hz(2),
        followLastRefInput(3)
    }

TypeFreq ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n60Hz(0),
        n5994Hz(1),
        n50Hz(2)
    }

TypeInputFreezeSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeOnTRSError(0),
        transparentForTRSErrors(1),
        forceFreeze(2)
    }

TypeConv1AspectInSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n169(0),
        n43(1),
        n169X(2)
    }

TypeConv1AspectIn ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n43(0),
        n169(1)
    }

TypeConv1StatusOut ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        invalid(0),
        n525(1),
        n625(2),
        n720p60(3),
        n720p5994(4),
        n720p50(5),
        n1080i60(6),
        n1080i5994(7),
        n1080i50(8)
    }

TypeConv1Mode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        pillarbox43Letterbox169(0),
        centerCut(1),
        stretchToFill(2)
    }

TypeOut1Assign ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input1(0),
        converter1(1)
    }

TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        black(0),
        red(1),
        green(2),
        blue(3),
        cyan(4),
        magenta(5),
        yellow(6),
        white(7),
        n15Grey(8),
        eQPath(9),
        pLLPath(10),
        eQPLLPath(11),
        n75Colorbar(12),
        colorbarOverRed(13)
    }

TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        sdtv(0),
        n720p(1),
        n1080i(2),
        followLastInput(3)
    }

TypeOut1CSC ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        bypass(0),
        convert(1),
        convertOnlyChroma(2)
    }

TypeOut1CSCMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        iTURBT7095ITUCCIR60(1),
        iTUCCIR60ITURBT7095(2)
    }

TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeField1(0),
        freezeField2(1),
        freezeFrame(2),
        black(3),
        testPattern(4)
    }

TypePresetsGPIOn ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        current(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypePresetsSaveAs ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypeEventReferenceNoInputSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventReferenceNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Reference No Input"
    ::= { paramEntry 14 }

eventSDIInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 1 No Input"
    ::= { paramEntry 15 }

eventFanFailure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Fan Failure"
    ::= { paramEntry 16 }

eventHighTemperature OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: High Temperature"
    ::= { paramEntry 17 }

eventCouldnotlocktoSDIInput1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Could not lock to SDI Input 1"
    ::= { paramEntry 18 }

eventCouldnotlocktoReference OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Could not lock to Reference"
    ::= { paramEntry 19 }

referenceLock OBJECT-TYPE
    SYNTAX TypeReferenceLock
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock all outputs to one of *RefIn *SDI1In *SDI2In"
    ::= { paramEntry 22 }

referenceStatus OBJECT-TYPE
    SYNTAX TypeReferenceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of Reference Input"
    ::= { paramEntry 23 }

referenceSource OBJECT-TYPE
    SYNTAX TypeReferenceSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
    ::= { paramEntry 24 }

freqPreselect OBJECT-TYPE
    SYNTAX TypeFreqPreselect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the frequency domain for the complete device (inputs, reference and outputs)"
    ::= { paramEntry 26 }

freq OBJECT-TYPE
    SYNTAX TypeFreq
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
    ::= { paramEntry 27 }

inputStatusSDI1 OBJECT-TYPE
    SYNTAX TypeReferenceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of SDI input channel 1"
    ::= { paramEntry 30 }

inputFreezeSDI1 OBJECT-TYPE
    SYNTAX TypeInputFreezeSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
    ::= { paramEntry 31 }

conv1AspectInSelect OBJECT-TYPE
    SYNTAX TypeConv1AspectInSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Aspect Ratio of Input signal - Converter 1
The auto setting will be interpreted as:
- 16:9 (HDTV)
- 4:3 (SDTV)"
    ::= { paramEntry 32 }

conv1AspectIn OBJECT-TYPE
    SYNTAX TypeConv1AspectIn
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Current Aspect Ratio of Input signal - Converter 1"
    ::= { paramEntry 33 }

conv1StatusOut OBJECT-TYPE
    SYNTAX TypeConv1StatusOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Display signal format of output - Converter 1"
    ::= { paramEntry 34 }

conv1Mode OBJECT-TYPE
    SYNTAX TypeConv1Mode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Conversion mode of Converter 1"
    ::= { paramEntry 35 }

out1Assign OBJECT-TYPE
    SYNTAX TypeOut1Assign
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assign SDI Out 1 to Input (direct) or to one of the Converters"
    ::= { paramEntry 36 }

out1Standard OBJECT-TYPE
    SYNTAX TypeConv1StatusOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI Out 1"
    ::= { paramEntry 37 }

out2Assign OBJECT-TYPE
    SYNTAX TypeOut1Assign
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assign SDI Out 2 to Input (direct) or to one of the Converters"
    ::= { paramEntry 38 }

out2Standard OBJECT-TYPE
    SYNTAX TypeConv1StatusOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI Out 2"
    ::= { paramEntry 39 }

out1DelayFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in frames. Combine with Out1/DelayLines and Out1/DelayPixel for total delay"
    ::= { paramEntry 40 }

out1DelayLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in lines. Combine with Out1/DelayFrames and Out1/DelayPixel for total delay"
    ::= { paramEntry 41 }

out1DelayPixel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in pixel. Combine with Out1/DelayFrames and Out1/DelayLines for total delay"
    ::= { paramEntry 42 }

out1DelayMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 user delay in milliseconds."
    ::= { paramEntry 43 }

out1Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust Video Gain"
    ::= { paramEntry 46 }

out1Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Saturation"
    ::= { paramEntry 47 }

out1BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
    ::= { paramEntry 48 }

out1Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Hue"
    ::= { paramEntry 49 }

out1TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 50 }

out1TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 51 }

out1TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable preselected test pattern"
    ::= { paramEntry 52 }

out1CSC OBJECT-TYPE
    SYNTAX TypeOut1CSC
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Color Space Conversion Operation, SDI Out 1
 - bypass completely
 - convert luma&chroma
 - convert only chroma"
    ::= { paramEntry 53 }

out1CSCMode OBJECT-TYPE
    SYNTAX TypeOut1CSCMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Color Space Conversion Mode of SDI Out 1"
    ::= { paramEntry 54 }

out1IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 55 }

out2DelayFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in frames. Combine with Out2/DelayLines and Out2/DelayPixel for total delay"
    ::= { paramEntry 56 }

out2DelayLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in lines. Combine with Out2/DelayFrames and Out2/DelayPixel for total delay"
    ::= { paramEntry 57 }

out2DelayPixel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in pixel. Combine with Out2/DelayFrames and Out2/DelayLines for total delay"
    ::= { paramEntry 58 }

out2DelayMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 user delay in milliseconds."
    ::= { paramEntry 59 }

out2Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust Video Gain"
    ::= { paramEntry 62 }

out2Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video Saturation"
    ::= { paramEntry 63 }

out2BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video black level (in IRE)"
    ::= { paramEntry 64 }

out2Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video Hue"
    ::= { paramEntry 65 }

out2TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 66 }

out2TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out2/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 67 }

out2TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable preselected test pattern"
    ::= { paramEntry 68 }

out2CSC OBJECT-TYPE
    SYNTAX TypeOut1CSC
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Color Space Conversion Operation, SDI Out 2
 - bypass completely
 - convert luma&chroma
 - convert only chroma"
    ::= { paramEntry 69 }

out2CSCMode OBJECT-TYPE
    SYNTAX TypeOut1CSCMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Color Space Conversion Mode of SDI Out 2"
    ::= { paramEntry 70 }

out2IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 71 }

out1EmbedGroup1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 1 into SDI Out 1"
    ::= { paramEntry 72 }

out1EmbedGroup2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 2 into SDI Out 1"
    ::= { paramEntry 73 }

out1EmbedGroup3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 3 into SDI Out 1"
    ::= { paramEntry 74 }

out1EmbedGroup4 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 4 into SDI Out 1"
    ::= { paramEntry 75 }

out2EmbedGroup1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 1 into SDI Out 2"
    ::= { paramEntry 76 }

out2EmbedGroup2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 2 into SDI Out 2"
    ::= { paramEntry 77 }

out2EmbedGroup3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 3 into SDI Out 2"
    ::= { paramEntry 78 }

out2EmbedGroup4 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 4 into SDI Out 2"
    ::= { paramEntry 79 }

temperatureMAX1617Int OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PCB temperature (MAX1617) in C"
    ::= { paramEntry 92 }

temperatureMAX1617Ext OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "FPGA temperature in C"
    ::= { paramEntry 93 }

presetsGPIOn OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 101 }

presetsGPIOff OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 102 }

presetsNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "maximum number of user presets"
    ::= { paramEntry 103 }

presetsActive OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Active Preset.<br>NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka <i>Current</i>) and make the required modifications there."
    ::= { paramEntry 104 }

presetsSaveAs OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
    ::= { paramEntry 105 }

presetsLoadToCurrent OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "loads selected user preset into the current user settings, all actual user changes will be lost"
    ::= { paramEntry 106 }

presetsName0 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 0"
    ::= { paramEntry 107 }

presetsName1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 1"
    ::= { paramEntry 108 }

presetsName2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 2"
    ::= { paramEntry 109 }

presetsName3 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 3"
    ::= { paramEntry 110 }

presetsName4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 4"
    ::= { paramEntry 111 }

presetsName5 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 5"
    ::= { paramEntry 112 }

presetsName6 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 6"
    ::= { paramEntry 113 }

presetsName7 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 7"
    ::= { paramEntry 114 }

out1ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable aperture correction"
    ::= { paramEntry 117 }

out1ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: aperture correction level"
    ::= { paramEntry 118 }

out2ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable aperture correction"
    ::= { paramEntry 119 }

out2ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: aperture correction level"
    ::= { paramEntry 120 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 124 }

eventReferenceNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Reference No Input"
    ::= { paramEntry 125 }

eventSDIInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 1 No Input"
    ::= { paramEntry 126 }

eventFanFailureSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Fan Failure"
    ::= { paramEntry 127 }

eventHighTemperatureSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: High Temperature"
    ::= { paramEntry 128 }

eventCouldnotlocktoSDIInput1SNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to SDI Input 1"
    ::= { paramEntry 129 }

eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to Reference"
    ::= { paramEntry 130 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 131 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PVD5600 parameters"
    ::= { sw197 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PVD5600 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventReferenceNoInput OnOffValue,
    eventSDIInput1NoInput OnOffValue,
    eventFanFailure OnOffValue,
    eventHighTemperature OnOffValue,
    eventCouldnotlocktoSDIInput1 OnOffValue,
    eventCouldnotlocktoReference OnOffValue,
    referenceLock TypeReferenceLock,
    referenceStatus TypeReferenceStatus,
    referenceSource TypeReferenceSource,
    freqPreselect TypeFreqPreselect,
    freq TypeFreq,
    inputStatusSDI1 TypeReferenceStatus,
    inputFreezeSDI1 TypeInputFreezeSDI1,
    conv1AspectInSelect TypeConv1AspectInSelect,
    conv1AspectIn TypeConv1AspectIn,
    conv1StatusOut TypeConv1StatusOut,
    conv1Mode TypeConv1Mode,
    out1Assign TypeOut1Assign,
    out1Standard TypeConv1StatusOut,
    out2Assign TypeOut1Assign,
    out2Standard TypeConv1StatusOut,
    out1DelayFrames Integer32,
    out1DelayLines Integer32,
    out1DelayPixel Integer32,
    out1DelayMs FixedPointValue3,
    out1Gain Integer32,
    out1Saturation Integer32,
    out1BlackLevel FixedPointValue1,
    out1Hue FixedPointValue1,
    out1TestPatternSelect TypeOut1TestPatternSelect,
    out1TestPatternStd TypeOut1TestPatternStd,
    out1TestPatternOn OnOffValue,
    out1CSC TypeOut1CSC,
    out1CSCMode TypeOut1CSCMode,
    out1IfNoInput TypeOut1IfNoInput,
    out2DelayFrames Integer32,
    out2DelayLines Integer32,
    out2DelayPixel Integer32,
    out2DelayMs FixedPointValue3,
    out2Gain Integer32,
    out2Saturation Integer32,
    out2BlackLevel FixedPointValue1,
    out2Hue FixedPointValue1,
    out2TestPatternSelect TypeOut1TestPatternSelect,
    out2TestPatternStd TypeOut1TestPatternStd,
    out2TestPatternOn OnOffValue,
    out2CSC TypeOut1CSC,
    out2CSCMode TypeOut1CSCMode,
    out2IfNoInput TypeOut1IfNoInput,
    out1EmbedGroup1 OnOffValue,
    out1EmbedGroup2 OnOffValue,
    out1EmbedGroup3 OnOffValue,
    out1EmbedGroup4 OnOffValue,
    out2EmbedGroup1 OnOffValue,
    out2EmbedGroup2 OnOffValue,
    out2EmbedGroup3 OnOffValue,
    out2EmbedGroup4 OnOffValue,
    temperatureMAX1617Int Integer32,
    temperatureMAX1617Ext Integer32,
    presetsGPIOn TypePresetsGPIOn,
    presetsGPIOff TypePresetsGPIOn,
    presetsNumber Integer32,
    presetsActive TypePresetsGPIOn,
    presetsSaveAs TypePresetsSaveAs,
    presetsLoadToCurrent TypePresetsSaveAs,
    presetsName0 DisplayString,
    presetsName1 DisplayString,
    presetsName2 DisplayString,
    presetsName3 DisplayString,
    presetsName4 DisplayString,
    presetsName5 DisplayString,
    presetsName6 DisplayString,
    presetsName7 DisplayString,
    out1ApertureEnable OnOffValue,
    out1ApertureLevel Integer32,
    out2ApertureEnable OnOffValue,
    out2ApertureLevel Integer32,
    boardID Integer32,
    eventReferenceNoInputSNMP TypeEventReferenceNoInputSNMP,
    eventSDIInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
    eventFanFailureSNMP TypeEventReferenceNoInputSNMP,
    eventHighTemperatureSNMP TypeEventReferenceNoInputSNMP,
    eventCouldnotlocktoSDIInput1SNMP TypeEventReferenceNoInputSNMP,
    eventCouldnotlocktoReferenceSNMP TypeEventReferenceNoInputSNMP,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PVD5600"
    ::= { sw197 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventReferenceNoInput,
        eventSDIInput1NoInput,
        eventFanFailure,
        eventHighTemperature,
        eventCouldnotlocktoSDIInput1,
        eventCouldnotlocktoReference,
        referenceLock,
        referenceStatus,
        referenceSource,
        freqPreselect,
        freq,
        inputStatusSDI1,
        inputFreezeSDI1,
        conv1AspectInSelect,
        conv1AspectIn,
        conv1StatusOut,
        conv1Mode,
        out1Assign,
        out1Standard,
        out2Assign,
        out2Standard,
        out1DelayFrames,
        out1DelayLines,
        out1DelayPixel,
        out1DelayMs,
        out1Gain,
        out1Saturation,
        out1BlackLevel,
        out1Hue,
        out1TestPatternSelect,
        out1TestPatternStd,
        out1TestPatternOn,
        out1CSC,
        out1CSCMode,
        out1IfNoInput,
        out2DelayFrames,
        out2DelayLines,
        out2DelayPixel,
        out2DelayMs,
        out2Gain,
        out2Saturation,
        out2BlackLevel,
        out2Hue,
        out2TestPatternSelect,
        out2TestPatternStd,
        out2TestPatternOn,
        out2CSC,
        out2CSCMode,
        out2IfNoInput,
        out1EmbedGroup1,
        out1EmbedGroup2,
        out1EmbedGroup3,
        out1EmbedGroup4,
        out2EmbedGroup1,
        out2EmbedGroup2,
        out2EmbedGroup3,
        out2EmbedGroup4,
        temperatureMAX1617Int,
        temperatureMAX1617Ext,
        presetsGPIOn,
        presetsGPIOff,
        presetsNumber,
        presetsActive,
        presetsSaveAs,
        presetsLoadToCurrent,
        presetsName0,
        presetsName1,
        presetsName2,
        presetsName3,
        presetsName4,
        presetsName5,
        presetsName6,
        presetsName7,
        out1ApertureEnable,
        out1ApertureLevel,
        out2ApertureEnable,
        out2ApertureLevel,
        boardID,
        eventReferenceNoInputSNMP,
        eventSDIInput1NoInputSNMP,
        eventFanFailureSNMP,
        eventHighTemperatureSNMP,
        eventCouldnotlocktoSDIInput1SNMP,
        eventCouldnotlocktoReferenceSNMP,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END