-- Machine generated MIB file, do not edit!
--
-- MIB file for PVD5610-BW-D-DW, type code 07.C4, software label 185
-- Generated on Tuesday, 09-Aug-16 11:02:02 UTC
-- CVS $Id: PVD5610-BW-D-DW_07c4_sw185.mib,v 1.17 2016/08/09 11:02:03 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PVD5610-BW-D-DW-07c4-sw185-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pvd5610-bw-d-dw-07c4-sw185 MODULE-IDENTITY
    LAST-UPDATED "201608091102Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PVD5610-BW-D-DW, type code 07.C4, software label 185"
    REVISION "201608091102Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 1988185 }

pvd5610-bw-d-dw-07c4 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PVD5610-BW-D-DW"
    ::= { products 1988 }

sw185 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 185"
    ::= { pvd5610-bw-d-dw-07c4 185 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeReferenceLock ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lockToRefIn(0),
        lockToSDI1(1)
    }

TypeReferenceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n1080i60(7),
        n1080i5994(8),
        n1080i50(9)
    }

TypeReferenceSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        externBoard(0),
        internRack(1)
    }

TypeFreqPreselect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n60Hz(0),
        n5994Hz(1),
        n50Hz(2),
        followLastRefInput(3)
    }

TypeFreq ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n60Hz(0),
        n5994Hz(1),
        n50Hz(2)
    }

TypeInputFreezeSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeOnTRSError(0),
        transparentForTRSErrors(1),
        forceFreeze(2)
    }

TypeConv1StatusOut ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        invalid(0),
        n525(1),
        n625(2),
        n720p60(3),
        n720p5994(4),
        n720p50(5),
        n1080i60(6),
        n1080i5994(7),
        n1080i50(8)
    }

TypeConv1Mode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        pillarbox43Letterbox169(0),
        centerCut(1),
        stretchToFill(2)
    }

TypeOut1Assign ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input1(0),
        converter1(1)
    }

TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        black(0),
        red(1),
        green(2),
        blue(3),
        cyan(4),
        magenta(5),
        yellow(6),
        white(7),
        n15Grey(8),
        eQPath(9),
        pLLPath(10),
        eQPLLPath(11),
        n75Colorbar(12),
        colorbarOverRed(13)
    }

TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        sdtv(0),
        n720p(1),
        n1080i(2),
        followLastInput(3)
    }

TypeOut1CSC ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        bypass(0),
        convert(1),
        convertOnlyChroma(2)
    }

TypeOut1CSCMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        iTURBT7095ITUCCIR60(1),
        iTUCCIR60ITURBT7095(2)
    }

TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeField1(0),
        freezeField2(1),
        freezeFrame(2),
        black(3),
        testPattern(4)
    }

TypeInputStatusAES1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        async(1),
        ok(2)
    }

TypeSourceInternAudio1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aES1(0),
        aES2(1),
        aES3(2),
        aES4(3),
        sDI11(4),
        sDI12(5),
        sDI13(6),
        sDI14(7),
        sDI15(8),
        sDI16(9),
        sDI17(10),
        sDI18(11)
    }

TypeSourceInternAudioDirect11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        sDI11(0),
        sDI12(1),
        sDI13(2),
        sDI14(3),
        sDI15(4),
        sDI16(5),
        sDI17(6),
        sDI18(7)
    }

TypeSourceAudioOutAES1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        stream1L(0),
        stream2L(1),
        stream3L(2),
        stream4L(3),
        stream5L(4),
        stream6L(5),
        stream7L(6),
        stream8L(7),
        stream9L(8),
        stream10L(9),
        stream11L(10),
        stream12L(11),
        stream13L(12),
        stream14L(13),
        stream15L(14),
        stream16L(15),
        stream17L(16),
        stream18L(17),
        stream19L(18),
        stream20L(19),
        stream21L(20),
        stream22L(21),
        stream23L(22),
        stream24L(23),
        mute(24)
    }

TypeSourceAudioOutMUX11L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        stream1L(0),
        stream2L(1),
        stream3L(2),
        stream4L(3),
        stream5L(4),
        stream6L(5),
        stream7L(6),
        stream8L(7),
        stream9L(8),
        stream10L(9),
        stream11L(10),
        stream12L(11),
        stream13L(12),
        stream14L(13),
        stream15L(14),
        stream16L(15),
        stream17L(16),
        stream18L(17),
        stream19L(18),
        stream20L(19),
        mute(20)
    }

TypePresetsGPIOn ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        current(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypePresetsSaveAs ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypeEventReferenceNoInputSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventReferenceNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Reference No Input"
    ::= { paramEntry 14 }

eventSDIInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Input 1 No Input"
    ::= { paramEntry 15 }

eventFanFailure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Fan Failure"
    ::= { paramEntry 16 }

eventHighTemperature OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: High Temperature"
    ::= { paramEntry 17 }

eventCouldnotlocktoSDIInput1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Could not lock to SDI Input 1"
    ::= { paramEntry 18 }

eventCouldnotlocktoReference OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Could not lock to Reference"
    ::= { paramEntry 19 }

eventAESInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 1 No Input"
    ::= { paramEntry 20 }

eventAESInput2NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 2 No Input"
    ::= { paramEntry 21 }

eventAESInput3NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 3 No Input"
    ::= { paramEntry 22 }

eventAESInput4NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 4 No Input"
    ::= { paramEntry 23 }

eventAESInput1asynchronous OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 1 asynchronous"
    ::= { paramEntry 24 }

eventAESInput2asynchronous OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 2 asynchronous"
    ::= { paramEntry 25 }

eventAESInput3asynchronous OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 3 asynchronous"
    ::= { paramEntry 26 }

eventAESInput4asynchronous OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 4 asynchronous"
    ::= { paramEntry 27 }

referenceLock OBJECT-TYPE
    SYNTAX TypeReferenceLock
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock all outputs to one of *RefIn *SDI1In *SDI2In"
    ::= { paramEntry 30 }

referenceStatus OBJECT-TYPE
    SYNTAX TypeReferenceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of Reference Input"
    ::= { paramEntry 31 }

referenceSource OBJECT-TYPE
    SYNTAX TypeReferenceSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
    ::= { paramEntry 32 }

freqPreselect OBJECT-TYPE
    SYNTAX TypeFreqPreselect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the frequency domain for the complete device (inputs, reference and outputs)"
    ::= { paramEntry 34 }

freq OBJECT-TYPE
    SYNTAX TypeFreq
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
    ::= { paramEntry 35 }

inputStatusSDI1 OBJECT-TYPE
    SYNTAX TypeReferenceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of SDI input channel 1"
    ::= { paramEntry 36 }

inputFreezeSDI1 OBJECT-TYPE
    SYNTAX TypeInputFreezeSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
    ::= { paramEntry 37 }

conv1StatusOut OBJECT-TYPE
    SYNTAX TypeConv1StatusOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Display signal format of output - Converter 1"
    ::= { paramEntry 41 }

conv1Mode OBJECT-TYPE
    SYNTAX TypeConv1Mode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Conversion mode of Converter 1"
    ::= { paramEntry 42 }

out1Assign OBJECT-TYPE
    SYNTAX TypeOut1Assign
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assign SDI Out 1 to Input (direct) or to one of the Converters"
    ::= { paramEntry 43 }

out1Standard OBJECT-TYPE
    SYNTAX TypeConv1StatusOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI Out 1"
    ::= { paramEntry 44 }

out2Assign OBJECT-TYPE
    SYNTAX TypeOut1Assign
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assign SDI Out 2 to Input (direct) or to one of the Converters"
    ::= { paramEntry 45 }

out2Standard OBJECT-TYPE
    SYNTAX TypeConv1StatusOut
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI Out 2"
    ::= { paramEntry 46 }

out1DelayFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in frames. Combine with Out1/DelayLines and Out1/DelayPixel for total delay"
    ::= { paramEntry 47 }

out1DelayLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in lines. Combine with Out1/DelayFrames and Out1/DelayPixel for total delay"
    ::= { paramEntry 48 }

out1DelayPixel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 delay in pixel. Combine with Out1/DelayFrames and Out1/DelayLines for total delay"
    ::= { paramEntry 49 }

out1DelayMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1 user delay in milliseconds."
    ::= { paramEntry 50 }

out1Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust Video Gain"
    ::= { paramEntry 53 }

out1Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Saturation"
    ::= { paramEntry 54 }

out1BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
    ::= { paramEntry 55 }

out1Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Hue"
    ::= { paramEntry 56 }

out1TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 57 }

out1TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 58 }

out1TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable preselected test pattern"
    ::= { paramEntry 59 }

out1CSC OBJECT-TYPE
    SYNTAX TypeOut1CSC
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Color Space Conversion Operation, SDI Out 1
 - bypass completely
 - convert luma&chroma
 - convert only chroma"
    ::= { paramEntry 60 }

out1CSCMode OBJECT-TYPE
    SYNTAX TypeOut1CSCMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Color Space Conversion Mode of SDI Out 1"
    ::= { paramEntry 61 }

out1IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 62 }

out2DelayFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in frames. Combine with Out2/DelayLines and Out2/DelayPixel for total delay"
    ::= { paramEntry 63 }

out2DelayLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in lines. Combine with Out2/DelayFrames and Out2/DelayPixel for total delay"
    ::= { paramEntry 64 }

out2DelayPixel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 delay in pixel. Combine with Out2/DelayFrames and Out2/DelayLines for total delay"
    ::= { paramEntry 65 }

out2DelayMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2 user delay in milliseconds."
    ::= { paramEntry 66 }

out2Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust Video Gain"
    ::= { paramEntry 69 }

out2Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video Saturation"
    ::= { paramEntry 70 }

out2BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video black level (in IRE)"
    ::= { paramEntry 71 }

out2Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: adjust video Hue"
    ::= { paramEntry 72 }

out2TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 73 }

out2TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out2/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 74 }

out2TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable preselected test pattern"
    ::= { paramEntry 75 }

out2CSC OBJECT-TYPE
    SYNTAX TypeOut1CSC
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Color Space Conversion Operation, SDI Out 2
 - bypass completely
 - convert luma&chroma
 - convert only chroma"
    ::= { paramEntry 76 }

out2CSCMode OBJECT-TYPE
    SYNTAX TypeOut1CSCMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Color Space Conversion Mode of SDI Out 2"
    ::= { paramEntry 77 }

out2IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 78 }

inputStatusAES1 OBJECT-TYPE
    SYNTAX TypeInputStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of AES input channel 1"
    ::= { paramEntry 79 }

inputStatusAES2 OBJECT-TYPE
    SYNTAX TypeInputStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of AES input channel 2"
    ::= { paramEntry 80 }

inputStatusAES3 OBJECT-TYPE
    SYNTAX TypeInputStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of AES input channel 3"
    ::= { paramEntry 81 }

inputStatusAES4 OBJECT-TYPE
    SYNTAX TypeInputStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Status of AES input channel 4"
    ::= { paramEntry 82 }

sourceInternAudio1 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 1"
    ::= { paramEntry 83 }

sourceInternAudio2 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 2"
    ::= { paramEntry 84 }

sourceInternAudio3 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 3"
    ::= { paramEntry 85 }

sourceInternAudio4 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 4"
    ::= { paramEntry 86 }

sourceInternAudio5 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 5"
    ::= { paramEntry 87 }

sourceInternAudio6 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 6"
    ::= { paramEntry 88 }

sourceInternAudio7 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 7"
    ::= { paramEntry 89 }

sourceInternAudio8 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 8"
    ::= { paramEntry 90 }

sourceInternAudio9 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 9"
    ::= { paramEntry 91 }

sourceInternAudio10 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 10"
    ::= { paramEntry 92 }

sourceInternAudio11 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 11"
    ::= { paramEntry 93 }

sourceInternAudio12 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 12"
    ::= { paramEntry 94 }

sourceInternAudio13 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 13"
    ::= { paramEntry 95 }

sourceInternAudio14 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 14"
    ::= { paramEntry 96 }

sourceInternAudio15 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 15"
    ::= { paramEntry 97 }

sourceInternAudio16 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 16"
    ::= { paramEntry 98 }

sourceInternAudio17 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 17"
    ::= { paramEntry 99 }

sourceInternAudio18 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 18"
    ::= { paramEntry 100 }

sourceInternAudio19 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 19"
    ::= { paramEntry 101 }

sourceInternAudio20 OBJECT-TYPE
    SYNTAX TypeSourceInternAudio1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 20"
    ::= { paramEntry 102 }

sourceInternAudioDirect11 OBJECT-TYPE
    SYNTAX TypeSourceInternAudioDirect11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 21"
    ::= { paramEntry 103 }

sourceInternAudioDirect12 OBJECT-TYPE
    SYNTAX TypeSourceInternAudioDirect11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 22"
    ::= { paramEntry 104 }

sourceInternAudioDirect13 OBJECT-TYPE
    SYNTAX TypeSourceInternAudioDirect11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 23"
    ::= { paramEntry 105 }

sourceInternAudioDirect14 OBJECT-TYPE
    SYNTAX TypeSourceInternAudioDirect11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for internal AES stream no. 24"
    ::= { paramEntry 106 }

sRC1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "switch sample rate converter (SRC) 1 ON/OFF"
    ::= { paramEntry 107 }

sRC2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "switch sample rate converter (SRC) 2 ON/OFF"
    ::= { paramEntry 108 }

sRC3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "switch sample rate converter (SRC) 3 ON/OFF"
    ::= { paramEntry 109 }

sRC4 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "switch sample rate converter (SRC) 4 ON/OFF"
    ::= { paramEntry 110 }

sRC5 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "switch sample rate converter (SRC) 5 ON/OFF"
    ::= { paramEntry 111 }

sRC6 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "switch sample rate converter (SRC) 6 ON/OFF"
    ::= { paramEntry 112 }

sRC7 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "switch sample rate converter (SRC) 7 ON/OFF"
    ::= { paramEntry 113 }

sRC8 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "switch sample rate converter (SRC) 8 ON/OFF"
    ::= { paramEntry 114 }

sourceAudioOutAES1L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutAES1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for AES output 1"
    ::= { paramEntry 323 }

sourceAudioOutAES2L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutAES1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for AES output 2"
    ::= { paramEntry 325 }

sourceAudioOutAES3L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutAES1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for AES output 3"
    ::= { paramEntry 327 }

sourceAudioOutAES4L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutAES1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for AES output 4"
    ::= { paramEntry 329 }

sourceAudioOutMUX11L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 1, AES 1 (group 1.1)"
    ::= { paramEntry 331 }

sourceAudioOutMUX12L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 1, AES 2 (group 1.2)"
    ::= { paramEntry 333 }

sourceAudioOutMUX13L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 1, AES 3 (group 2.1)"
    ::= { paramEntry 335 }

sourceAudioOutMUX14L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 1, AES 4 (group 2.2)"
    ::= { paramEntry 337 }

sourceAudioOutMUX15L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 1, AES 5 (group 3.1)"
    ::= { paramEntry 339 }

sourceAudioOutMUX16L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 1, AES 6 (group 3.2)"
    ::= { paramEntry 341 }

sourceAudioOutMUX17L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 1, AES 7 (group 4.1)"
    ::= { paramEntry 343 }

sourceAudioOutMUX18L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 1, AES 8 (group 4.2)"
    ::= { paramEntry 345 }

sourceAudioOutMUX21L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 2, AES 1 (group 1.1)"
    ::= { paramEntry 347 }

sourceAudioOutMUX22L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 2, AES 2 (group 1.2)"
    ::= { paramEntry 349 }

sourceAudioOutMUX23L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 2, AES 3 (group 2.1)"
    ::= { paramEntry 351 }

sourceAudioOutMUX24L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 2, AES 4 (group 2.2)"
    ::= { paramEntry 353 }

sourceAudioOutMUX25L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 2, AES 5 (group 3.1)"
    ::= { paramEntry 355 }

sourceAudioOutMUX26L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 2, AES 6 (group 3.2)"
    ::= { paramEntry 357 }

sourceAudioOutMUX27L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 2, AES 7 (group 4.1)"
    ::= { paramEntry 359 }

sourceAudioOutMUX28L OBJECT-TYPE
    SYNTAX TypeSourceAudioOutMUX11L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "select source for MUX 2, AES 8 (group 4.2)"
    ::= { paramEntry 361 }

out1EmbedGroup1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 1 into SDI Out 1"
    ::= { paramEntry 363 }

out1EmbedGroup2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 2 into SDI Out 1"
    ::= { paramEntry 364 }

out1EmbedGroup3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 3 into SDI Out 1"
    ::= { paramEntry 365 }

out1EmbedGroup4 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 4 into SDI Out 1"
    ::= { paramEntry 366 }

out2EmbedGroup1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 1 into SDI Out 2"
    ::= { paramEntry 367 }

out2EmbedGroup2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 2 into SDI Out 2"
    ::= { paramEntry 368 }

out2EmbedGroup3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 3 into SDI Out 2"
    ::= { paramEntry 369 }

out2EmbedGroup4 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "embed group 4 into SDI Out 2"
    ::= { paramEntry 370 }

temperatureMAX1617Int OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PCB temperature (MAX1617) in C"
    ::= { paramEntry 383 }

temperatureMAX1617Ext OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "FPGA temperature in C"
    ::= { paramEntry 384 }

presetsGPIOn OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 395 }

presetsGPIOff OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 396 }

presetsNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "maximum number of user presets"
    ::= { paramEntry 397 }

presetsActive OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Active Preset.<br>NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka <i>Current</i>) and make the required modifications there."
    ::= { paramEntry 398 }

presetsSaveAs OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
    ::= { paramEntry 399 }

presetsLoadToCurrent OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "loads selected user preset into the current user settings, all actual user changes will be lost"
    ::= { paramEntry 400 }

presetsName0 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 0"
    ::= { paramEntry 401 }

presetsName1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 1"
    ::= { paramEntry 402 }

presetsName2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 2"
    ::= { paramEntry 403 }

presetsName3 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 3"
    ::= { paramEntry 404 }

presetsName4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 4"
    ::= { paramEntry 405 }

presetsName5 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 5"
    ::= { paramEntry 406 }

presetsName6 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 6"
    ::= { paramEntry 407 }

presetsName7 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 7"
    ::= { paramEntry 408 }

out1ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable aperture correction"
    ::= { paramEntry 409 }

out1ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: aperture correction level"
    ::= { paramEntry 410 }

out2ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: enable aperture correction"
    ::= { paramEntry 411 }

out2ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 2: aperture correction level"
    ::= { paramEntry 412 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 413 }

eventReferenceNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Reference No Input"
    ::= { paramEntry 414 }

eventSDIInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 1 No Input"
    ::= { paramEntry 415 }

eventFanFailureSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Fan Failure"
    ::= { paramEntry 416 }

eventHighTemperatureSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: High Temperature"
    ::= { paramEntry 417 }

eventCouldnotlocktoSDIInput1SNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to SDI Input 1"
    ::= { paramEntry 418 }

eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to Reference"
    ::= { paramEntry 419 }

eventAESInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 1 No Input"
    ::= { paramEntry 420 }

eventAESInput2NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 2 No Input"
    ::= { paramEntry 421 }

eventAESInput3NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 3 No Input"
    ::= { paramEntry 422 }

eventAESInput4NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 4 No Input"
    ::= { paramEntry 423 }

eventAESInput1asynchronousSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 1 asynchronous"
    ::= { paramEntry 424 }

eventAESInput2asynchronousSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 2 asynchronous"
    ::= { paramEntry 425 }

eventAESInput3asynchronousSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 3 asynchronous"
    ::= { paramEntry 426 }

eventAESInput4asynchronousSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 4 asynchronous"
    ::= { paramEntry 427 }

crossBarAudioIntern OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Mono Crossbar for Internal Audio AES Streams"
    ::= { paramEntry 428 }

crossBarAudioOutMUX1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 1"
    ::= { paramEntry 429 }

crossBarAudioOutMUX2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 2"
    ::= { paramEntry 430 }

crossBarAudioOutExtAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Stereo Crossbar for External Audio Out AES"
    ::= { paramEntry 431 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 432 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PVD5610-BW-D-DW parameters"
    ::= { sw185 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PVD5610-BW-D-DW parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventReferenceNoInput OnOffValue,
    eventSDIInput1NoInput OnOffValue,
    eventFanFailure OnOffValue,
    eventHighTemperature OnOffValue,
    eventCouldnotlocktoSDIInput1 OnOffValue,
    eventCouldnotlocktoReference OnOffValue,
    eventAESInput1NoInput OnOffValue,
    eventAESInput2NoInput OnOffValue,
    eventAESInput3NoInput OnOffValue,
    eventAESInput4NoInput OnOffValue,
    eventAESInput1asynchronous OnOffValue,
    eventAESInput2asynchronous OnOffValue,
    eventAESInput3asynchronous OnOffValue,
    eventAESInput4asynchronous OnOffValue,
    referenceLock TypeReferenceLock,
    referenceStatus TypeReferenceStatus,
    referenceSource TypeReferenceSource,
    freqPreselect TypeFreqPreselect,
    freq TypeFreq,
    inputStatusSDI1 TypeReferenceStatus,
    inputFreezeSDI1 TypeInputFreezeSDI1,
    conv1StatusOut TypeConv1StatusOut,
    conv1Mode TypeConv1Mode,
    out1Assign TypeOut1Assign,
    out1Standard TypeConv1StatusOut,
    out2Assign TypeOut1Assign,
    out2Standard TypeConv1StatusOut,
    out1DelayFrames Integer32,
    out1DelayLines Integer32,
    out1DelayPixel Integer32,
    out1DelayMs FixedPointValue3,
    out1Gain Integer32,
    out1Saturation Integer32,
    out1BlackLevel FixedPointValue1,
    out1Hue FixedPointValue1,
    out1TestPatternSelect TypeOut1TestPatternSelect,
    out1TestPatternStd TypeOut1TestPatternStd,
    out1TestPatternOn OnOffValue,
    out1CSC TypeOut1CSC,
    out1CSCMode TypeOut1CSCMode,
    out1IfNoInput TypeOut1IfNoInput,
    out2DelayFrames Integer32,
    out2DelayLines Integer32,
    out2DelayPixel Integer32,
    out2DelayMs FixedPointValue3,
    out2Gain Integer32,
    out2Saturation Integer32,
    out2BlackLevel FixedPointValue1,
    out2Hue FixedPointValue1,
    out2TestPatternSelect TypeOut1TestPatternSelect,
    out2TestPatternStd TypeOut1TestPatternStd,
    out2TestPatternOn OnOffValue,
    out2CSC TypeOut1CSC,
    out2CSCMode TypeOut1CSCMode,
    out2IfNoInput TypeOut1IfNoInput,
    inputStatusAES1 TypeInputStatusAES1,
    inputStatusAES2 TypeInputStatusAES1,
    inputStatusAES3 TypeInputStatusAES1,
    inputStatusAES4 TypeInputStatusAES1,
    sourceInternAudio1 TypeSourceInternAudio1,
    sourceInternAudio2 TypeSourceInternAudio1,
    sourceInternAudio3 TypeSourceInternAudio1,
    sourceInternAudio4 TypeSourceInternAudio1,
    sourceInternAudio5 TypeSourceInternAudio1,
    sourceInternAudio6 TypeSourceInternAudio1,
    sourceInternAudio7 TypeSourceInternAudio1,
    sourceInternAudio8 TypeSourceInternAudio1,
    sourceInternAudio9 TypeSourceInternAudio1,
    sourceInternAudio10 TypeSourceInternAudio1,
    sourceInternAudio11 TypeSourceInternAudio1,
    sourceInternAudio12 TypeSourceInternAudio1,
    sourceInternAudio13 TypeSourceInternAudio1,
    sourceInternAudio14 TypeSourceInternAudio1,
    sourceInternAudio15 TypeSourceInternAudio1,
    sourceInternAudio16 TypeSourceInternAudio1,
    sourceInternAudio17 TypeSourceInternAudio1,
    sourceInternAudio18 TypeSourceInternAudio1,
    sourceInternAudio19 TypeSourceInternAudio1,
    sourceInternAudio20 TypeSourceInternAudio1,
    sourceInternAudioDirect11 TypeSourceInternAudioDirect11,
    sourceInternAudioDirect12 TypeSourceInternAudioDirect11,
    sourceInternAudioDirect13 TypeSourceInternAudioDirect11,
    sourceInternAudioDirect14 TypeSourceInternAudioDirect11,
    sRC1 OnOffValue,
    sRC2 OnOffValue,
    sRC3 OnOffValue,
    sRC4 OnOffValue,
    sRC5 OnOffValue,
    sRC6 OnOffValue,
    sRC7 OnOffValue,
    sRC8 OnOffValue,
    sourceAudioOutAES1L TypeSourceAudioOutAES1L,
    sourceAudioOutAES2L TypeSourceAudioOutAES1L,
    sourceAudioOutAES3L TypeSourceAudioOutAES1L,
    sourceAudioOutAES4L TypeSourceAudioOutAES1L,
    sourceAudioOutMUX11L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX12L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX13L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX14L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX15L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX16L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX17L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX18L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX21L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX22L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX23L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX24L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX25L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX26L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX27L TypeSourceAudioOutMUX11L,
    sourceAudioOutMUX28L TypeSourceAudioOutMUX11L,
    out1EmbedGroup1 OnOffValue,
    out1EmbedGroup2 OnOffValue,
    out1EmbedGroup3 OnOffValue,
    out1EmbedGroup4 OnOffValue,
    out2EmbedGroup1 OnOffValue,
    out2EmbedGroup2 OnOffValue,
    out2EmbedGroup3 OnOffValue,
    out2EmbedGroup4 OnOffValue,
    temperatureMAX1617Int Integer32,
    temperatureMAX1617Ext Integer32,
    presetsGPIOn TypePresetsGPIOn,
    presetsGPIOff TypePresetsGPIOn,
    presetsNumber Integer32,
    presetsActive TypePresetsGPIOn,
    presetsSaveAs TypePresetsSaveAs,
    presetsLoadToCurrent TypePresetsSaveAs,
    presetsName0 DisplayString,
    presetsName1 DisplayString,
    presetsName2 DisplayString,
    presetsName3 DisplayString,
    presetsName4 DisplayString,
    presetsName5 DisplayString,
    presetsName6 DisplayString,
    presetsName7 DisplayString,
    out1ApertureEnable OnOffValue,
    out1ApertureLevel Integer32,
    out2ApertureEnable OnOffValue,
    out2ApertureLevel Integer32,
    boardID Integer32,
    eventReferenceNoInputSNMP TypeEventReferenceNoInputSNMP,
    eventSDIInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
    eventFanFailureSNMP TypeEventReferenceNoInputSNMP,
    eventHighTemperatureSNMP TypeEventReferenceNoInputSNMP,
    eventCouldnotlocktoSDIInput1SNMP TypeEventReferenceNoInputSNMP,
    eventCouldnotlocktoReferenceSNMP TypeEventReferenceNoInputSNMP,
    eventAESInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
    eventAESInput2NoInputSNMP TypeEventReferenceNoInputSNMP,
    eventAESInput3NoInputSNMP TypeEventReferenceNoInputSNMP,
    eventAESInput4NoInputSNMP TypeEventReferenceNoInputSNMP,
    eventAESInput1asynchronousSNMP TypeEventReferenceNoInputSNMP,
    eventAESInput2asynchronousSNMP TypeEventReferenceNoInputSNMP,
    eventAESInput3asynchronousSNMP TypeEventReferenceNoInputSNMP,
    eventAESInput4asynchronousSNMP TypeEventReferenceNoInputSNMP,
    crossBarAudioIntern DisplayString,
    crossBarAudioOutMUX1 DisplayString,
    crossBarAudioOutMUX2 DisplayString,
    crossBarAudioOutExtAES DisplayString,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PVD5610-BW-D-DW"
    ::= { sw185 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventReferenceNoInput,
        eventSDIInput1NoInput,
        eventFanFailure,
        eventHighTemperature,
        eventCouldnotlocktoSDIInput1,
        eventCouldnotlocktoReference,
        eventAESInput1NoInput,
        eventAESInput2NoInput,
        eventAESInput3NoInput,
        eventAESInput4NoInput,
        eventAESInput1asynchronous,
        eventAESInput2asynchronous,
        eventAESInput3asynchronous,
        eventAESInput4asynchronous,
        referenceLock,
        referenceStatus,
        referenceSource,
        freqPreselect,
        freq,
        inputStatusSDI1,
        inputFreezeSDI1,
        conv1StatusOut,
        conv1Mode,
        out1Assign,
        out1Standard,
        out2Assign,
        out2Standard,
        out1DelayFrames,
        out1DelayLines,
        out1DelayPixel,
        out1DelayMs,
        out1Gain,
        out1Saturation,
        out1BlackLevel,
        out1Hue,
        out1TestPatternSelect,
        out1TestPatternStd,
        out1TestPatternOn,
        out1CSC,
        out1CSCMode,
        out1IfNoInput,
        out2DelayFrames,
        out2DelayLines,
        out2DelayPixel,
        out2DelayMs,
        out2Gain,
        out2Saturation,
        out2BlackLevel,
        out2Hue,
        out2TestPatternSelect,
        out2TestPatternStd,
        out2TestPatternOn,
        out2CSC,
        out2CSCMode,
        out2IfNoInput,
        inputStatusAES1,
        inputStatusAES2,
        inputStatusAES3,
        inputStatusAES4,
        sourceInternAudio1,
        sourceInternAudio2,
        sourceInternAudio3,
        sourceInternAudio4,
        sourceInternAudio5,
        sourceInternAudio6,
        sourceInternAudio7,
        sourceInternAudio8,
        sourceInternAudio9,
        sourceInternAudio10,
        sourceInternAudio11,
        sourceInternAudio12,
        sourceInternAudio13,
        sourceInternAudio14,
        sourceInternAudio15,
        sourceInternAudio16,
        sourceInternAudio17,
        sourceInternAudio18,
        sourceInternAudio19,
        sourceInternAudio20,
        sourceInternAudioDirect11,
        sourceInternAudioDirect12,
        sourceInternAudioDirect13,
        sourceInternAudioDirect14,
        sRC1,
        sRC2,
        sRC3,
        sRC4,
        sRC5,
        sRC6,
        sRC7,
        sRC8,
        sourceAudioOutAES1L,
        sourceAudioOutAES2L,
        sourceAudioOutAES3L,
        sourceAudioOutAES4L,
        sourceAudioOutMUX11L,
        sourceAudioOutMUX12L,
        sourceAudioOutMUX13L,
        sourceAudioOutMUX14L,
        sourceAudioOutMUX15L,
        sourceAudioOutMUX16L,
        sourceAudioOutMUX17L,
        sourceAudioOutMUX18L,
        sourceAudioOutMUX21L,
        sourceAudioOutMUX22L,
        sourceAudioOutMUX23L,
        sourceAudioOutMUX24L,
        sourceAudioOutMUX25L,
        sourceAudioOutMUX26L,
        sourceAudioOutMUX27L,
        sourceAudioOutMUX28L,
        out1EmbedGroup1,
        out1EmbedGroup2,
        out1EmbedGroup3,
        out1EmbedGroup4,
        out2EmbedGroup1,
        out2EmbedGroup2,
        out2EmbedGroup3,
        out2EmbedGroup4,
        temperatureMAX1617Int,
        temperatureMAX1617Ext,
        presetsGPIOn,
        presetsGPIOff,
        presetsNumber,
        presetsActive,
        presetsSaveAs,
        presetsLoadToCurrent,
        presetsName0,
        presetsName1,
        presetsName2,
        presetsName3,
        presetsName4,
        presetsName5,
        presetsName6,
        presetsName7,
        out1ApertureEnable,
        out1ApertureLevel,
        out2ApertureEnable,
        out2ApertureLevel,
        boardID,
        eventReferenceNoInputSNMP,
        eventSDIInput1NoInputSNMP,
        eventFanFailureSNMP,
        eventHighTemperatureSNMP,
        eventCouldnotlocktoSDIInput1SNMP,
        eventCouldnotlocktoReferenceSNMP,
        eventAESInput1NoInputSNMP,
        eventAESInput2NoInputSNMP,
        eventAESInput3NoInputSNMP,
        eventAESInput4NoInputSNMP,
        eventAESInput1asynchronousSNMP,
        eventAESInput2asynchronousSNMP,
        eventAESInput3asynchronousSNMP,
        eventAESInput4asynchronousSNMP,
        crossBarAudioIntern,
        crossBarAudioOutMUX1,
        crossBarAudioOutMUX2,
        crossBarAudioOutExtAES,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END