-- Machine generated MIB file, do not edit!
--
-- MIB file for PVD5630-B-D, type code 07.D1, software label 383
-- Generated on Tuesday, 09-Aug-16 11:31:46 UTC
-- CVS $Id: PVD5630-B-D_07d1_sw383.mib,v 1.18 2016/08/09 11:31:48 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs contain
-- unpublished proprietary information written by LYNX Technik AG and
-- are protected by Federal copyright law. They may not be disclosed
-- to third parties or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--
PVD5630-B-D-07d1-sw383-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
mib-modules, products,
FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;
pvd5630-b-d-07d1-sw383 MODULE-IDENTITY
LAST-UPDATED "201608091131Z"
ORGANIZATION "LYNX Technik AG"
CONTACT-INFO "LYNX Technik AG
Brunnenweg 3
64331 Weiterstadt
http://www.lynx-technik.com
mailto:support@lynx-technik.com"
DESCRIPTION "MIB module definition for PVD5630-B-D, type code 07.D1, software label 383"
REVISION "201608091131Z"
DESCRIPTION "Generated by LYNX Asset Database"
::= { mib-modules 2001383 }
pvd5630-b-d-07d1 OBJECT-IDENTITY
STATUS current
DESCRIPTION "LYNX device type PVD5630-B-D"
::= { products 2001 }
sw383 OBJECT-IDENTITY
STATUS current
DESCRIPTION "Software label 383"
::= { pvd5630-b-d-07d1 383 }
-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unknown(0),
black(1),
green(2),
yellow(3),
red(4)
}
TypeFactoryReset ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
press(0)
}
TypeReferenceLock ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
lockToRefIn(0),
lockToSDI1(1),
lockToSDI2(2)
}
TypeReferenceStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
invalid(1),
n525(2),
n625(3),
n720p60(4),
n720p5994(5),
n720p50(6),
n720p30(7),
n720p2997(8),
n720p25(9),
n720p24(10),
n720p2398(11),
n1080i60(12),
n1080i5994(13),
n1080i50(14),
n1080p60(15),
n1080p5994(16),
n1080p50(17),
n1080p30(18),
n1080p2997(19),
n1080p25(20),
n1080p24(21),
n1080p2398(22),
n1080psF30(23),
n1080psF2997(24),
n1080psF25(25),
n1080psF24(26),
n1080psF2398(27)
}
TypeReferenceSource ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
externBoard(0),
internRack(1)
}
TypeFreqPreselect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
evenFrequencies(0),
oddFrequencies(1),
followLastRefInput(2)
}
TypeFreq ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
evenFreq(0),
oddFreq(1),
evenFreqX(2)
}
TypeGPIFunc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
switchVideoInputs(1),
freezeInput1(2),
freezeInput2(3),
freezeBothInputs(4),
switchUserPresets(5)
}
TypeSyncMode1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
frameSync(0),
lineSyncH(1),
lineSyncV(2)
}
TypeInputFreezeSDI1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freezeOnTRSError(0),
transparentForTRSErrors(1),
forceFreeze(2)
}
TypeConv1Source ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
input1(0),
input2(1)
}
TypeConv1ControlMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
manual(0),
aFDAutomated(1),
wSSAutomated(2),
vIAutomated(3)
}
TypeConv1AspectInSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n169(0),
n43(1),
n169X(2)
}
TypeConv1AspectIn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n43(0),
n169(1)
}
TypeConv1FormatOut ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n52543(0),
n525169(1),
n62543(2),
n625169(3)
}
TypeConv1StatusOut ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
invalid(0),
n525(1),
n625(2),
n720p60(3),
n720p5994(4),
n720p50(5),
n720p30(6),
n720p2997(7),
n720p25(8),
n720p24(9),
n720p2398(10),
n1080i60(11),
n1080i5994(12),
n1080i50(13),
n1080p60(14),
n1080p5994(15),
n1080p50(16),
n1080p30(17),
n1080p2997(18),
n1080p25(19),
n1080p24(20),
n1080p2398(21),
n1080psF30(22),
n1080psF2997(23),
n1080psF25(24),
n1080psF24(25),
n1080psF2398(26)
}
TypeConv1Mode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
pillarbox43Letterbox169(0),
centerCut(1),
stretchToFill(2)
}
TypeConv1MetaAFDInStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
present(1)
}
TypeConv1MetaCCCDPOutStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
present(1)
}
TypeConv1MetaCCCDPSourcePrio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
s334CDP(0),
s334RAW(1),
line21(2)
}
TypeConv1MetaCCCDPSourcePrio2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
s334CDP(1),
s334RAW(2),
line21(3)
}
TypeConv1MetaTCLTCSourcePrio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
aTCLTC(0),
aTCVITC(1),
dVITCA(2),
dVITCB(3)
}
TypeConv1MetaTCLTCSourcePrio2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
aTCLTC(1),
aTCVITC(2),
dVITCA(3),
dVITCB(4)
}
TypeConv1MetaTCDVITCInStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
present(1),
presentX(2),
presentXX(3)
}
TypeConv1MetaTCDVITCADestination625 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n6(0),
n7(1),
n8(2),
n9(3),
n10(4),
n11(5),
n12(6),
n13(7),
n14(8),
n15(9),
n16(10),
n17(11),
n18(12),
n19(13),
n20(14),
n21(15),
n22(16)
}
TypeConv1ModeAutoARto169 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
boxed(0),
cut(1),
stretch(2)
}
TypeConv1InsertAFDFullFrame169 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n1000(0),
n1010(1)
}
TypeConv1ModeAutoFallback ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
useLastValidFormatDescr(0),
useManualSettings(1)
}
TypeSDIIn1TCDVITCASource625 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
auto(0),
n6(1),
n7(2),
n8(3),
n9(4),
n10(5),
n11(6),
n12(7),
n13(8),
n14(9),
n15(10),
n16(11),
n17(12),
n18(13),
n19(14),
n20(15),
n21(16),
n22(17)
}
TypeOut1Assign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
input1(0),
input2(1),
converter1(2),
converter2(3)
}
TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
black(0),
red(1),
green(2),
blue(3),
cyan(4),
magenta(5),
yellow(6),
white(7),
n15Grey(8),
eQPath(9),
pLLPath(10),
eQPLLPath(11),
n75Colorbar(12),
colorbarOverRed(13)
}
TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n525(0),
n625(1),
n720p60(2),
n720p5994(3),
n720p50(4),
n720p30(5),
n720p2997(6),
n720p25(7),
n720p24(8),
n720p2398(9),
n1080i60(10),
n1080i5994(11),
n1080i50(12),
n1080p30(13),
n1080p2997(14),
n1080p25(15),
n1080p24(16),
n1080p2398(17),
n1080psF24(18),
n1080psF2398(19),
followLastInput(20)
}
TypeOut1CSC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
bypass(0),
convert(1),
convertOnlyChroma(2)
}
TypeOut1CSCMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
iTURBT7095ITUCCIR60(1),
iTUCCIR60ITURBT7095(2)
}
TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freeze(0),
black(1),
testPattern(2)
}
TypeInputStatusAES1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
async(1),
ok(2)
}
TypeSourceInternAudio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
aES1(0),
aES2(1),
aES3(2),
aES4(3),
sDI11(4),
sDI12(5),
sDI13(6),
sDI14(7),
sDI15(8),
sDI16(9),
sDI17(10),
sDI18(11),
sDI21(12),
sDI22(13),
sDI23(14),
sDI24(15),
sDI25(16),
sDI26(17),
sDI27(18),
sDI28(19)
}
TypeSourceInternAudioDirect11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDI11(0),
sDI12(1),
sDI13(2),
sDI14(3),
sDI15(4),
sDI16(5),
sDI17(6),
sDI18(7)
}
TypeSourceInternAudioDirect21 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDI21(0),
sDI22(1),
sDI23(2),
sDI24(3),
sDI25(4),
sDI26(5),
sDI27(6),
sDI28(7)
}
TypeAudioMute1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
norm(0),
mute(1)
}
TypeAudioInvert1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
norm(0),
inv(1)
}
TypeAudioSilence1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
silence(0),
ok(1)
}
TypeAudioOverload1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
ok(0),
overload(1)
}
TypeBits11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n20Bit(0),
n24Bit(1)
}
TypeSourceAudioOutAES1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
stream1L(0),
stream1R(1),
stream2L(2),
stream2R(3),
stream3L(4),
stream3R(5),
stream4L(6),
stream4R(7),
stream5L(8),
stream5R(9),
stream6L(10),
stream6R(11),
stream7L(12),
stream7R(13),
stream8L(14),
stream8R(15),
stream9L(16),
stream9R(17),
stream10L(18),
stream10R(19),
stream11L(20),
stream11R(21),
stream12L(22),
stream12R(23),
stream13L(24),
stream13R(25),
stream14L(26),
stream14R(27),
stream15L(28),
stream15R(29),
stream16L(30),
stream16R(31),
stream17L(32),
stream17R(33),
stream18L(34),
stream18R(35),
stream19L(36),
stream19R(37),
stream20L(38),
stream20R(39),
muteTimedByRefL(40),
muteTimedByRefR(41),
stream21L(42),
stream21R(43),
stream22L(44),
stream22R(45),
stream23L(46),
stream23R(47),
stream24L(48),
stream24R(49),
muteTimedBySDI1L(50),
muteTimedBySDI1R(51),
stream25L(52),
stream25R(53),
stream26L(54),
stream26R(55),
stream27L(56),
stream27R(57),
stream28L(58),
stream28R(59),
muteTimedBySDI2L(60),
muteTimedBySDI2R(61)
}
TypeSourceAudioOutMUX11L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
stream1L(0),
stream1R(1),
stream2L(2),
stream2R(3),
stream3L(4),
stream3R(5),
stream4L(6),
stream4R(7),
stream5L(8),
stream5R(9),
stream6L(10),
stream6R(11),
stream7L(12),
stream7R(13),
stream8L(14),
stream8R(15),
stream9L(16),
stream9R(17),
stream10L(18),
stream10R(19),
stream11L(20),
stream11R(21),
stream12L(22),
stream12R(23),
stream13L(24),
stream13R(25),
stream14L(26),
stream14R(27),
stream15L(28),
stream15R(29),
stream16L(30),
stream16R(31),
stream17L(32),
stream17R(33),
stream18L(34),
stream18R(35),
stream19L(36),
stream19R(37),
stream20L(38),
stream20R(39),
muteTimedByRefL(40),
muteTimedByRefR(41)
}
TypeOut1StatusGroup1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
present(0),
none(1)
}
TypeOut1DeleteGroup1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
keep(0),
del(1)
}
TypeVideoDelayTracking ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
sDIOut1(1),
sDIOut2(2),
sDIOut3(3)
}
TypeDelayPulseAssign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDIOut1(0),
sDIOut2(1),
sDIOut3(2)
}
TypeDeembPhaseSyncVerify1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
on(0),
off(1)
}
TypePresetsGPIOn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
current(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeGenLockStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unlocked(0),
locked(1)
}
TypeAudioContentSDI11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
automatic(0),
pCMAudio(1),
dolbyE(2),
nonPCMData(3)
}
TypeAudioContentStatusSDI11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
pCMAudio(1),
dolbyE(2),
nonPCMData(3)
}
TypeSDIIn1StatusAFD ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
n0010LetterboxTopImageInA43Frame(1),
n0011Letterbox149ImageInA43Frame(2),
n0100169LetterboxCenterImageInA43Frame(3),
n1000FullFrameImageInA43Frame(4),
n1001FullFrameImageInA43Frame(5),
n1010169LetterboxImageVerticallyCenteredInA43Frame(6),
n1011149LetterboxImageVerticallyCenteredInA43Frame(7),
n110143ImageShootProtect149InA43Frame(8),
n1110169LetterboxImageShootProtect149InA43Frame(9),
n1111169LetterboxImageShootProtect43InA43Frame(10),
n0010169FullFrameImageInA169Frame(11),
n0011149PillarboxImageInA169Frame(12),
n0100169LetterboxCenterImageInA169Frame(13),
n1000FullFrameImageInA169Frame(14),
n1001PillarboxImageInA169Frame(15),
n1010Protected169FullFrameImageInA169Frame(16),
n1011149PillarboxImageInA169Frame(17),
n110143PillarboxImageShootProtect149InA169Frame(18),
n1110169ImageShootProtect149InA169Frame(19),
n1111169ImageShootProtect43InA169Frame(20)
}
TypeSDIIn1StatusWSS ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
fullFormat43(1),
box149Center(2),
box149Top(3),
box169Center(4),
box169Top(5),
box169CenterX(6),
fullFormat169CenterAndProtected149(7),
fullFormat169Anamorphic(8)
}
TypeSDIIn1StatusVI ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
n52543(1),
n62543(2),
n525169(3),
n625169(4)
}
TypeSDIIn1StatusFormatReactOnChange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
delayed(0),
quick(1)
}
TypeOut1DelayMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
framesLinesPixels(0),
milliSeconds(1)
}
TypeOut1FreezeMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freezeField1(0),
freezeField2(1),
freezeFrame(2),
testPattern(3)
}
TypeAudioDolbyETiming1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDIOut1(0),
sDIOut2(1),
sDIOut3(2),
aESOut(3),
none(4)
}
TypePresetsSaveAs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
nA(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeEventReferenceNoInputSNMP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
onOnly(1),
offOnly(2),
onOff(3)
}
-- Parameter definitions
typeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LYNX product type name"
::= { paramEntry 1 }
displayName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
::= { paramEntry 2 }
position OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
::= { paramEntry 3 }
uptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Connection time of the device to this UI (in seconds)"
::= { paramEntry 4 }
type OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device type code"
::= { paramEntry 5 }
version OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device version information"
::= { paramEntry 6 }
statusColor OBJECT-TYPE
SYNTAX TypeStatusColor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
::= { paramEntry 7 }
statusColorRGB OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
::= { paramEntry 8 }
statusText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current status text (OK or error-details)"
::= { paramEntry 9 }
factoryReset OBJECT-TYPE
SYNTAX TypeFactoryReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
::= { paramEntry 10 }
lock OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock Device"
::= { paramEntry 11 }
locate OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
::= { paramEntry 12 }
eventReferenceNoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: Reference No Input"
::= { paramEntry 14 }
eventSDIInput1NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: SDI Input 1 No Input"
::= { paramEntry 15 }
eventSDIInput2NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: SDI Input 2 No Input"
::= { paramEntry 16 }
eventFanFailure OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: Fan Failure"
::= { paramEntry 17 }
eventHighTemperature OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: High Temperature"
::= { paramEntry 18 }
eventCouldnotlocktoSDIInput1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: Could not lock to SDI Input 1"
::= { paramEntry 19 }
eventCouldnotlocktoSDIInput2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: Could not lock to SDI Input 2"
::= { paramEntry 20 }
eventCouldnotlocktoReference OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: Could not lock to Reference"
::= { paramEntry 21 }
eventAESInput1NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 1 No Input"
::= { paramEntry 22 }
eventAESInput2NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 2 No Input"
::= { paramEntry 23 }
eventAESInput3NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 3 No Input"
::= { paramEntry 24 }
eventAESInput4NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 4 No Input"
::= { paramEntry 25 }
eventAESInput1asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 1 asynchronous"
::= { paramEntry 26 }
eventAESInput2asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 2 asynchronous"
::= { paramEntry 27 }
eventAESInput3asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 3 asynchronous"
::= { paramEntry 28 }
eventAESInput4asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 4 asynchronous"
::= { paramEntry 29 }
channel2CoupleTo1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI-Output Channel 2: couple all selections to channel 1"
::= { paramEntry 33 }
channel3CoupleTo1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI-Output Channel 3: couple all selections to channel 1"
::= { paramEntry 34 }
referenceLock OBJECT-TYPE
SYNTAX TypeReferenceLock
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock all outputs to one of *RefIn *SDI1In *SDI2In"
::= { paramEntry 35 }
referenceStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of Reference Input"
::= { paramEntry 36 }
referenceSource OBJECT-TYPE
SYNTAX TypeReferenceSource
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
::= { paramEntry 37 }
freqPreselect OBJECT-TYPE
SYNTAX TypeFreqPreselect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the frequency domain for the complete device (inputs, reference and outputs)"
::= { paramEntry 38 }
freq OBJECT-TYPE
SYNTAX TypeFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
::= { paramEntry 39 }
gPIFunc OBJECT-TYPE
SYNTAX TypeGPIFunc
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify influence of GPI input"
::= { paramEntry 40 }
syncMode1 OBJECT-TYPE
SYNTAX TypeSyncMode1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Synchronization Mode for SDI Channel 1"
::= { paramEntry 41 }
inputStatusSDI1 OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of SDI input channel 1"
::= { paramEntry 42 }
inputFreezeSDI1 OBJECT-TYPE
SYNTAX TypeInputFreezeSDI1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
::= { paramEntry 43 }
syncSDIIn1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed).
This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.
NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path."
::= { paramEntry 44 }
syncMode2 OBJECT-TYPE
SYNTAX TypeSyncMode1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Synchronization Mode for SDI Channel 2"
::= { paramEntry 45 }
inputStatusSDI2 OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of SDI input channel 2"
::= { paramEntry 46 }
inputFreezeSDI2 OBJECT-TYPE
SYNTAX TypeInputFreezeSDI1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
::= { paramEntry 47 }
syncSDIIn2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed).
This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.
NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path."
::= { paramEntry 48 }
conv1Source OBJECT-TYPE
SYNTAX TypeConv1Source
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Input source signal for Converter 1"
::= { paramEntry 49 }
conv1ControlMode OBJECT-TYPE
SYNTAX TypeConv1ControlMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select control mode of converter 1"
::= { paramEntry 50 }
conv1AspectInSelect OBJECT-TYPE
SYNTAX TypeConv1AspectInSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Aspect Ratio of Input signal - Converter 1
The auto setting will be interpreted as:
- 16:9 (HDTV)
- 4:3 (SDTV)"
::= { paramEntry 51 }
conv1AspectIn OBJECT-TYPE
SYNTAX TypeConv1AspectIn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Aspect Ratio of Input signal - Converter 1"
::= { paramEntry 52 }
conv1FormatOut OBJECT-TYPE
SYNTAX TypeConv1FormatOut
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Signal format of scaler output"
::= { paramEntry 53 }
conv1StatusOut OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of output - Converter 1"
::= { paramEntry 54 }
conv1Mode OBJECT-TYPE
SYNTAX TypeConv1Mode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Conversion mode of Converter 1"
::= { paramEntry 55 }
conv1OutInsertAFD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Active format description into the video data from Scaler"
::= { paramEntry 57 }
conv1OutInsertVI OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Video Index into the video data from Scaler"
::= { paramEntry 58 }
conv1OutInsertWSS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Wide Screen Signaling into the video data from Scaler"
::= { paramEntry 59 }
conv1StatusIn OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 1"
::= { paramEntry 60 }
conv2Source OBJECT-TYPE
SYNTAX TypeConv1Source
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Input source signal for Converter 2"
::= { paramEntry 61 }
conv2ControlMode OBJECT-TYPE
SYNTAX TypeConv1ControlMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select control mode of converter 2"
::= { paramEntry 62 }
conv2AspectInSelect OBJECT-TYPE
SYNTAX TypeConv1AspectInSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Aspect Ratio of Input signal - Converter 2
The auto setting will be interpreted as:
- 16:9 (HDTV)
- 4:3 (SDTV)"
::= { paramEntry 63 }
conv2AspectIn OBJECT-TYPE
SYNTAX TypeConv1AspectIn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Aspect Ratio of Input signal - Converter 2"
::= { paramEntry 64 }
conv2FormatOut OBJECT-TYPE
SYNTAX TypeConv1FormatOut
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Signal format of scaler output"
::= { paramEntry 65 }
conv2StatusOut OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of output - Converter 2"
::= { paramEntry 66 }
conv2Mode OBJECT-TYPE
SYNTAX TypeConv1Mode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Conversion mode of Converter 2"
::= { paramEntry 67 }
conv2OutInsertAFD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Active format description into the video data from HiQ Scaler"
::= { paramEntry 69 }
conv2OutInsertVI OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Video Index into the video data from HiQ Scaler"
::= { paramEntry 70 }
conv2OutInsertWSS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Wide Screen Signaling into the video data from HiQ Scaler"
::= { paramEntry 71 }
conv2StatusIn OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 2"
::= { paramEntry 72 }
conv1MetaAdvancedSettings OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Activate advanced Meta Data settings of converter 1"
::= { paramEntry 73 }
conv1MetaCCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Close Caption to default for converter 1"
::= { paramEntry 74 }
conv1MetaTCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Time Code to default for converter 1"
::= { paramEntry 75 }
conv1MetaAFDInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AFD detection on input of converter 1"
::= { paramEntry 76 }
conv1MetaVIInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VI detection on input of converter 1"
::= { paramEntry 77 }
conv1MetaWSSInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "WSS detection on input of converter 1"
::= { paramEntry 78 }
conv1MetaCCCDPOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at output of converter 1"
::= { paramEntry 79 }
conv1MetaCCCDPInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at input of converter 1"
::= { paramEntry 80 }
conv1MetaCCCDPInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 1"
::= { paramEntry 81 }
conv1MetaCCCDPSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 82 }
conv1MetaCCCDPSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 83 }
conv1MetaCCCDPSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 84 }
conv1MetaCCRAWOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at output of converter 1"
::= { paramEntry 85 }
conv1MetaCCRAWInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at input of converter 1"
::= { paramEntry 86 }
conv1MetaCCRAWInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 RAW transport packet (containing CEA-608 data) into output of converter 1"
::= { paramEntry 87 }
conv1MetaCCRAWSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 88 }
conv1MetaCCRAWSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 89 }
conv1MetaCCRAWSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 90 }
conv1MetaCCL21OutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as Line 21 (containing CEA-608 data) at output of converter 1"
::= { paramEntry 91 }
conv1MetaCCL21InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as Line 21 (containing CEA-608 data) at input of converter 1"
::= { paramEntry 92 }
conv1MetaCCL21Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in Line 21 (containing CEA-608 data) into output of converter 1"
::= { paramEntry 93 }
conv1MetaCCL21SourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 94 }
conv1MetaCCL21SourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 95 }
conv1MetaCCL21SourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 96 }
conv1MetaTCLTCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-LTC at input of converter 1"
::= { paramEntry 97 }
conv1MetaTCLTCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-LTC into output of converter 1"
::= { paramEntry 98 }
conv1MetaTCLTCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 99 }
conv1MetaTCLTCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 100 }
conv1MetaTCLTCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-LTC into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 101 }
conv1MetaTCVITCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-VITC at input of converter 1"
::= { paramEntry 102 }
conv1MetaTCVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-VITC into output of converter 1"
::= { paramEntry 103 }
conv1MetaTCVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 104 }
conv1MetaTCVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 105 }
conv1MetaTCVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-VITC into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 106 }
conv1MetaTCDVITCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as DVITC at input of converter 1"
::= { paramEntry 107 }
conv1MetaTCDVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as DVITC into output of converter 1"
::= { paramEntry 108 }
conv1MetaTCDVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as DVITC into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 109 }
conv1MetaTCDVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as DVITC into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 110 }
conv1MetaTCDVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as DVITC into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 111 }
conv1MetaTCLTCOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-LTC on output of converter 1"
::= { paramEntry 112 }
conv1MetaTCVITCOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-VITC on output of converter 1"
::= { paramEntry 113 }
conv1MetaTCDVITCAOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-A on output of converter 1"
::= { paramEntry 114 }
conv1MetaTCDVITCBOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-B on output of converter 1"
::= { paramEntry 115 }
conv1MetaTCDVITCADestination625 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 1 (for even frequency standards)"
::= { paramEntry 116 }
conv1MetaTCDVITCBDestination625 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 1 (for even frequency standards)"
::= { paramEntry 117 }
conv1MetaTCDVITCADestination525 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 1 (for odd frequency standards)"
::= { paramEntry 118 }
conv1MetaTCDVITCBDestination525 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 1 (for odd frequency standards)"
::= { paramEntry 119 }
conv1MetaTCDVITCADetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-A TimeCode has been detected in the input of converter 1"
::= { paramEntry 120 }
conv1MetaTCDVITCBDetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-B TimeCode has been detected in the input of converter 1"
::= { paramEntry 121 }
conv1MetaTCVITCDetectedDVITCLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the incoming VITC shall be inserted into the output of converter 1, when it is encoded as DVITC."
::= { paramEntry 122 }
conv1MetaTCDVITCAutomatic OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable automatic selection of DVITC line for insertion on output of converter 1"
::= { paramEntry 123 }
conv1ModeAutoARto169 OBJECT-TYPE
SYNTAX TypeConv1ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 16:9 mode for Converter 1"
::= { paramEntry 139 }
conv1ModeAutoARto43 OBJECT-TYPE
SYNTAX TypeConv1ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 4:3 mode for Converter 1"
::= { paramEntry 140 }
conv1InsertAFDFullFrame169 OBJECT-TYPE
SYNTAX TypeConv1InsertAFDFullFrame169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AFD Full Frame 16:9 mode for Converter 1"
::= { paramEntry 141 }
conv1ModeAutoFallback OBJECT-TYPE
SYNTAX TypeConv1ModeAutoFallback
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Auto Fallback mode for Converter 1"
::= { paramEntry 142 }
conv2MetaAdvancedSettings OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Activate advanced Meta Data settings of converter 2"
::= { paramEntry 143 }
conv2MetaCCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Close Caption to default for converter 2"
::= { paramEntry 144 }
conv2MetaTCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Time Code to default for converter 2"
::= { paramEntry 145 }
conv2MetaAFDInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AFD detection on input of converter 2"
::= { paramEntry 146 }
conv2MetaVIInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VI detection on input of converter 2"
::= { paramEntry 147 }
conv2MetaWSSInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "WSS detection on input of converter 2"
::= { paramEntry 148 }
conv2MetaCCCDPOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at output of converter 2"
::= { paramEntry 149 }
conv2MetaCCCDPInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at input of converter 2"
::= { paramEntry 150 }
conv2MetaCCCDPInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 2"
::= { paramEntry 151 }
conv2MetaCCCDPSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 152 }
conv2MetaCCCDPSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 153 }
conv2MetaCCCDPSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 154 }
conv2MetaCCRAWOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at output of converter 2"
::= { paramEntry 155 }
conv2MetaCCRAWInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at input of converter 2"
::= { paramEntry 156 }
conv2MetaCCRAWInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 RAW transport packet (containing CEA-608 data) into output of converter 2"
::= { paramEntry 157 }
conv2MetaCCRAWSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 158 }
conv2MetaCCRAWSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 159 }
conv2MetaCCRAWSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 160 }
conv2MetaCCL21OutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as Line 21 (containing CEA-608 data) at output of converter 2"
::= { paramEntry 161 }
conv2MetaCCL21InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as Line 21 (containing CEA-608 data) at input of converter 2"
::= { paramEntry 162 }
conv2MetaCCL21Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in Line 21 (containing CEA-608 data) into output of converter 2"
::= { paramEntry 163 }
conv2MetaCCL21SourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 164 }
conv2MetaCCL21SourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 165 }
conv2MetaCCL21SourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 166 }
conv2MetaTCLTCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-LTC at input of converter 2"
::= { paramEntry 167 }
conv2MetaTCLTCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-LTC into output of converter 2"
::= { paramEntry 168 }
conv2MetaTCLTCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 169 }
conv2MetaTCLTCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 170 }
conv2MetaTCLTCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-LTC into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 171 }
conv2MetaTCVITCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-VITC at input of converter 2"
::= { paramEntry 172 }
conv2MetaTCVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-VITC into output of converter 2"
::= { paramEntry 173 }
conv2MetaTCVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 174 }
conv2MetaTCVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 175 }
conv2MetaTCVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-VITC into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 176 }
conv2MetaTCDVITCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as DVITC at input of converter 2"
::= { paramEntry 177 }
conv2MetaTCDVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as DVITC into output of converter 2"
::= { paramEntry 178 }
conv2MetaTCDVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as DVITC into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 179 }
conv2MetaTCDVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as DVITC into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 180 }
conv2MetaTCDVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as DVITC into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 181 }
conv2MetaTCLTCOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-LTC on output of converter 2"
::= { paramEntry 182 }
conv2MetaTCVITCOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-VITC on output of converter 2"
::= { paramEntry 183 }
conv2MetaTCDVITCAOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-A on output of converter 2"
::= { paramEntry 184 }
conv2MetaTCDVITCBOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-B on output of converter 2"
::= { paramEntry 185 }
conv2MetaTCDVITCADestination625 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 2 (for even frequency standards)"
::= { paramEntry 186 }
conv2MetaTCDVITCBDestination625 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 2 (for even frequency standards)"
::= { paramEntry 187 }
conv2MetaTCDVITCADestination525 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 2 (for odd frequency standards)"
::= { paramEntry 188 }
conv2MetaTCDVITCBDestination525 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 2 (for odd frequency standards)"
::= { paramEntry 189 }
conv2MetaTCDVITCADetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-A TimeCode has been detected in the input of converter 2"
::= { paramEntry 190 }
conv2MetaTCDVITCBDetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-B TimeCode has been detected in the input of converter 2"
::= { paramEntry 191 }
conv2MetaTCVITCDetectedDVITCLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the incoming VITC shall be inserted into the output of converter 2, when it is encoded as DVITC."
::= { paramEntry 192 }
conv2MetaTCDVITCAutomatic OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable automatic selection of DVITC line for insertion on output of converter 2"
::= { paramEntry 193 }
conv2ModeAutoARto169 OBJECT-TYPE
SYNTAX TypeConv1ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 16:9 mode for Converter 2"
::= { paramEntry 209 }
conv2ModeAutoARto43 OBJECT-TYPE
SYNTAX TypeConv1ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 4:3 mode for Converter 2"
::= { paramEntry 210 }
conv2InsertAFDFullFrame169 OBJECT-TYPE
SYNTAX TypeConv1InsertAFDFullFrame169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AFD Full Frame 16:9 mode for Converter 2"
::= { paramEntry 211 }
conv2ModeAutoFallback OBJECT-TYPE
SYNTAX TypeConv1ModeAutoFallback
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Auto Fallback mode for Converter 2"
::= { paramEntry 212 }
sDIIn1TCDVITCASource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 1 (for even-frequency standards)"
::= { paramEntry 221 }
sDIIn1TCDVITCBSource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 1 (for even-frequency standards)"
::= { paramEntry 222 }
sDIIn1TCDVITCASource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 1 (for odd-frequency standards)"
::= { paramEntry 223 }
sDIIn1TCDVITCBSource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 1 (for odd-frequency standards)"
::= { paramEntry 224 }
sDIIn2TCDVITCASource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 2 (for even-frequency standards)"
::= { paramEntry 225 }
sDIIn2TCDVITCBSource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 2 (for even-frequency standards)"
::= { paramEntry 226 }
sDIIn2TCDVITCASource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 2 (for odd-frequency standards)"
::= { paramEntry 227 }
sDIIn2TCDVITCBSource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 2 (for odd-frequency standards)"
::= { paramEntry 228 }
sDIIn1CCCDPStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at SDI Input 1"
::= { paramEntry 229 }
sDIIn1CCRAWStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at SDI Input 1"
::= { paramEntry 230 }
sDIIn1CCL21Status OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as Line 21 (containing CEA-608 data) at SDI Input 1"
::= { paramEntry 231 }
sDIIn1TCLTCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-LTC at SDI Input 1"
::= { paramEntry 232 }
sDIIn1TCVITCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-VITC at SDI Input 1"
::= { paramEntry 233 }
sDIIn1TCDVITCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as DVITC at SDI Input 1"
::= { paramEntry 234 }
sDIIn2CCCDPStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at SDI Input 2"
::= { paramEntry 235 }
sDIIn2CCRAWStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at SDI Input 2"
::= { paramEntry 236 }
sDIIn2CCL21Status OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as Line 21 (containing CEA-608 data) at SDI Input 2"
::= { paramEntry 237 }
sDIIn2TCLTCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-LTC at SDI Input 2"
::= { paramEntry 238 }
sDIIn2TCVITCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-VITC at SDI Input 2"
::= { paramEntry 239 }
sDIIn2TCDVITCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as DVITC at SDI Input 2"
::= { paramEntry 240 }
out1Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 1 to Input (direct) or to one of the Converters"
::= { paramEntry 241 }
out1Standard OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 1"
::= { paramEntry 242 }
out2Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 2 to Input (direct) or to one of the Converters"
::= { paramEntry 243 }
out2Standard OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 2"
::= { paramEntry 244 }
out3Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 3 to Input (direct) or to one of the Converters"
::= { paramEntry 245 }
out3Standard OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 3"
::= { paramEntry 246 }
out4Assign OBJECT-TYPE
SYNTAX TypeConv1Source
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 4 to Input (direct) or to one of the Converters"
::= { paramEntry 247 }
out4Standard OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 4"
::= { paramEntry 248 }
out1DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in frames. Combine with Out1/DelayLines and Out1/DelayPixel for total delay"
::= { paramEntry 249 }
out1DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in lines. Combine with Out1/DelayFrames and Out1/DelayPixel for total delay"
::= { paramEntry 250 }
out1DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in pixel. Combine with Out1/DelayFrames and Out1/DelayLines for total delay"
::= { paramEntry 251 }
out1DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 user delay in milliseconds."
::= { paramEntry 252 }
out1ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable aperture correction"
::= { paramEntry 253 }
out1ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: aperture correction level"
::= { paramEntry 254 }
out1HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable H-Blanking"
::= { paramEntry 255 }
out1VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable V-Blanking"
::= { paramEntry 256 }
out1Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust Video Gain"
::= { paramEntry 257 }
out1Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Saturation"
::= { paramEntry 258 }
out1BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
::= { paramEntry 259 }
out1Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Hue"
::= { paramEntry 260 }
out1TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 261 }
out1TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 262 }
out1TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable preselected test pattern"
::= { paramEntry 263 }
out1CSC OBJECT-TYPE
SYNTAX TypeOut1CSC
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Color Space Conversion Operation, SDI Out 1
- bypass completely
- convert luma&chroma
- convert only chroma"
::= { paramEntry 264 }
out1CSCMode OBJECT-TYPE
SYNTAX TypeOut1CSCMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Color Space Conversion Mode of SDI Out 1"
::= { paramEntry 265 }
out1IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 266 }
out2DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in frames. Combine with Out2/DelayLines and Out2/DelayPixel for total delay"
::= { paramEntry 268 }
out2DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in lines. Combine with Out2/DelayFrames and Out2/DelayPixel for total delay"
::= { paramEntry 269 }
out2DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in pixel. Combine with Out2/DelayFrames and Out2/DelayLines for total delay"
::= { paramEntry 270 }
out2DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 user delay in milliseconds."
::= { paramEntry 271 }
out2ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable aperture correction"
::= { paramEntry 272 }
out2ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: aperture correction level"
::= { paramEntry 273 }
out2HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable H-Blanking"
::= { paramEntry 274 }
out2VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable V-Blanking"
::= { paramEntry 275 }
out2Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust Video Gain"
::= { paramEntry 276 }
out2Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Saturation"
::= { paramEntry 277 }
out2BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video black level (in IRE)"
::= { paramEntry 278 }
out2Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Hue"
::= { paramEntry 279 }
out2TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 280 }
out2TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out2/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 281 }
out2TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable preselected test pattern"
::= { paramEntry 282 }
out2CSC OBJECT-TYPE
SYNTAX TypeOut1CSC
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Color Space Conversion Operation, SDI Out 2
- bypass completely
- convert luma&chroma
- convert only chroma"
::= { paramEntry 283 }
out2CSCMode OBJECT-TYPE
SYNTAX TypeOut1CSCMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Color Space Conversion Mode of SDI Out 2"
::= { paramEntry 284 }
out2IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 285 }
out3DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 delay in frames. Combine with Out3/DelayLines and Out3/DelayPixel for total delay"
::= { paramEntry 287 }
out3DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 delay in lines. Combine with Out3/DelayFrames and Out3/DelayPixel for total delay"
::= { paramEntry 288 }
out3DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 delay in pixel. Combine with Out3/DelayFrames and Out3/DelayLines for total delay"
::= { paramEntry 289 }
out3DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 user delay in milliseconds."
::= { paramEntry 290 }
out3ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable aperture correction"
::= { paramEntry 291 }
out3ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: aperture correction level"
::= { paramEntry 292 }
out3HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable H-Blanking"
::= { paramEntry 293 }
out3VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable V-Blanking"
::= { paramEntry 294 }
out3Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust Video Gain"
::= { paramEntry 295 }
out3Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust video Saturation"
::= { paramEntry 296 }
out3BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust video black level (in IRE)"
::= { paramEntry 297 }
out3Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust video Hue"
::= { paramEntry 298 }
out3TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 299 }
out3TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out3/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 300 }
out3TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable preselected test pattern"
::= { paramEntry 301 }
out3CSC OBJECT-TYPE
SYNTAX TypeOut1CSC
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Color Space Conversion Operation, SDI Out 3
- bypass completely
- convert luma&chroma
- convert only chroma"
::= { paramEntry 302 }
out3CSCMode OBJECT-TYPE
SYNTAX TypeOut1CSCMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Color Space Conversion Mode of SDI Out 3"
::= { paramEntry 303 }
out3IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 304 }
inputStatusAES1 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 1"
::= { paramEntry 306 }
inputStatusAES2 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 2"
::= { paramEntry 307 }
inputStatusAES3 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 3"
::= { paramEntry 308 }
inputStatusAES4 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 4"
::= { paramEntry 309 }
sourceInternAudio1 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 1"
::= { paramEntry 310 }
sourceInternAudio2 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 2"
::= { paramEntry 311 }
sourceInternAudio3 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 3"
::= { paramEntry 312 }
sourceInternAudio4 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 4"
::= { paramEntry 313 }
sourceInternAudio5 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 5"
::= { paramEntry 314 }
sourceInternAudio6 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 6"
::= { paramEntry 315 }
sourceInternAudio7 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 7"
::= { paramEntry 316 }
sourceInternAudio8 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 8"
::= { paramEntry 317 }
sourceInternAudio9 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 9"
::= { paramEntry 318 }
sourceInternAudio10 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 10"
::= { paramEntry 319 }
sourceInternAudio11 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 11"
::= { paramEntry 320 }
sourceInternAudio12 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 12"
::= { paramEntry 321 }
sourceInternAudio13 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 13"
::= { paramEntry 322 }
sourceInternAudio14 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 14"
::= { paramEntry 323 }
sourceInternAudio15 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 15"
::= { paramEntry 324 }
sourceInternAudio16 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 16"
::= { paramEntry 325 }
sourceInternAudio17 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 17"
::= { paramEntry 326 }
sourceInternAudio18 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 18"
::= { paramEntry 327 }
sourceInternAudio19 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 19"
::= { paramEntry 328 }
sourceInternAudio20 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 20"
::= { paramEntry 329 }
sourceInternAudioDirect11 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 21"
::= { paramEntry 330 }
sourceInternAudioDirect12 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 22"
::= { paramEntry 331 }
sourceInternAudioDirect13 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 23"
::= { paramEntry 332 }
sourceInternAudioDirect14 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 24"
::= { paramEntry 333 }
sourceInternAudioDirect21 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 25"
::= { paramEntry 334 }
sourceInternAudioDirect22 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 26"
::= { paramEntry 335 }
sourceInternAudioDirect23 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 27"
::= { paramEntry 336 }
sourceInternAudioDirect24 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 28"
::= { paramEntry 337 }
sRC1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 1 ON/OFF"
::= { paramEntry 338 }
sRC2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 2 ON/OFF"
::= { paramEntry 339 }
sRC3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 3 ON/OFF"
::= { paramEntry 340 }
sRC4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 4 ON/OFF"
::= { paramEntry 341 }
sRC5 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 5 ON/OFF"
::= { paramEntry 342 }
sRC6 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 6 ON/OFF"
::= { paramEntry 343 }
sRC7 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 7 ON/OFF"
::= { paramEntry 344 }
sRC8 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 8 ON/OFF"
::= { paramEntry 345 }
audioGain1L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 1 L"
::= { paramEntry 346 }
audioMute1L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 1L"
::= { paramEntry 347 }
audioInvert1L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 1L"
::= { paramEntry 348 }
audioSilence1L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 1L"
::= { paramEntry 349 }
audioOverload1L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 1 L"
::= { paramEntry 350 }
audioGain1R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 1 R"
::= { paramEntry 351 }
audioMute1R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 1R"
::= { paramEntry 352 }
audioInvert1R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 1R"
::= { paramEntry 353 }
audioSilence1R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 1R"
::= { paramEntry 354 }
audioOverload1R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 1 R"
::= { paramEntry 355 }
audioMixDown1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 356 }
audioGain2L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 2 L"
::= { paramEntry 357 }
audioMute2L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 2L"
::= { paramEntry 358 }
audioInvert2L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 2L"
::= { paramEntry 359 }
audioSilence2L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 2L"
::= { paramEntry 360 }
audioOverload2L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 2 L"
::= { paramEntry 361 }
audioGain2R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 2 R"
::= { paramEntry 362 }
audioMute2R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 2R"
::= { paramEntry 363 }
audioInvert2R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 2R"
::= { paramEntry 364 }
audioSilence2R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 2R"
::= { paramEntry 365 }
audioOverload2R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 2 R"
::= { paramEntry 366 }
audioMixDown2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 367 }
audioGain3L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 3 L"
::= { paramEntry 368 }
audioMute3L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 3L"
::= { paramEntry 369 }
audioInvert3L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 3L"
::= { paramEntry 370 }
audioSilence3L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 3L"
::= { paramEntry 371 }
audioOverload3L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 3 L"
::= { paramEntry 372 }
audioGain3R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 3 R"
::= { paramEntry 373 }
audioMute3R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 3R"
::= { paramEntry 374 }
audioInvert3R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 3R"
::= { paramEntry 375 }
audioSilence3R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 3R"
::= { paramEntry 376 }
audioOverload3R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 3 R"
::= { paramEntry 377 }
audioMixDown3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 378 }
audioGain4L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 4 L"
::= { paramEntry 379 }
audioMute4L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 4L"
::= { paramEntry 380 }
audioInvert4L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 4L"
::= { paramEntry 381 }
audioSilence4L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 4L"
::= { paramEntry 382 }
audioOverload4L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 4 L"
::= { paramEntry 383 }
audioGain4R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 4 R"
::= { paramEntry 384 }
audioMute4R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 4R"
::= { paramEntry 385 }
audioInvert4R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 4R"
::= { paramEntry 386 }
audioSilence4R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 4R"
::= { paramEntry 387 }
audioOverload4R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 4 R"
::= { paramEntry 388 }
audioMixDown4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 389 }
audioGain5L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 5 L"
::= { paramEntry 390 }
audioMute5L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 5L"
::= { paramEntry 391 }
audioInvert5L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 5L"
::= { paramEntry 392 }
audioSilence5L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 5L"
::= { paramEntry 393 }
audioOverload5L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 5 L"
::= { paramEntry 394 }
audioGain5R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 5 R"
::= { paramEntry 395 }
audioMute5R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 5R"
::= { paramEntry 396 }
audioInvert5R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 5R"
::= { paramEntry 397 }
audioSilence5R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 5R"
::= { paramEntry 398 }
audioOverload5R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 5 R"
::= { paramEntry 399 }
audioMixDown5 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 400 }
audioGain6L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 6 L"
::= { paramEntry 401 }
audioMute6L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 6L"
::= { paramEntry 402 }
audioInvert6L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 6L"
::= { paramEntry 403 }
audioSilence6L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 6L"
::= { paramEntry 404 }
audioOverload6L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 6 L"
::= { paramEntry 405 }
audioGain6R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 6 R"
::= { paramEntry 406 }
audioMute6R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 6R"
::= { paramEntry 407 }
audioInvert6R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 6R"
::= { paramEntry 408 }
audioSilence6R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 6R"
::= { paramEntry 409 }
audioOverload6R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 6 R"
::= { paramEntry 410 }
audioMixDown6 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 411 }
audioGain7L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 7 L"
::= { paramEntry 412 }
audioMute7L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 7L"
::= { paramEntry 413 }
audioInvert7L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 7L"
::= { paramEntry 414 }
audioSilence7L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 7L"
::= { paramEntry 415 }
audioOverload7L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 7 L"
::= { paramEntry 416 }
audioGain7R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 7 R"
::= { paramEntry 417 }
audioMute7R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 7R"
::= { paramEntry 418 }
audioInvert7R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 7R"
::= { paramEntry 419 }
audioSilence7R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 7R"
::= { paramEntry 420 }
audioOverload7R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 7 R"
::= { paramEntry 421 }
audioMixDown7 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 422 }
audioGain8L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 8 L"
::= { paramEntry 423 }
audioMute8L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 8L"
::= { paramEntry 424 }
audioInvert8L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 8L"
::= { paramEntry 425 }
audioSilence8L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 8L"
::= { paramEntry 426 }
audioOverload8L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 8 L"
::= { paramEntry 427 }
audioGain8R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 8 R"
::= { paramEntry 428 }
audioMute8R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 8R"
::= { paramEntry 429 }
audioInvert8R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 8R"
::= { paramEntry 430 }
audioSilence8R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 8R"
::= { paramEntry 431 }
audioOverload8R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 8 R"
::= { paramEntry 432 }
audioMixDown8 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 433 }
audioGain9L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 9 L"
::= { paramEntry 434 }
audioMute9L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 9L"
::= { paramEntry 435 }
audioInvert9L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 9L"
::= { paramEntry 436 }
audioSilence9L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 9L"
::= { paramEntry 437 }
audioOverload9L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 9 L"
::= { paramEntry 438 }
audioGain9R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 9 R"
::= { paramEntry 439 }
audioMute9R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 9R"
::= { paramEntry 440 }
audioInvert9R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 9R"
::= { paramEntry 441 }
audioSilence9R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 9R"
::= { paramEntry 442 }
audioOverload9R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 9 R"
::= { paramEntry 443 }
audioMixDown9 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 444 }
audioGain10L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 10 L"
::= { paramEntry 445 }
audioMute10L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 10L"
::= { paramEntry 446 }
audioInvert10L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 10L"
::= { paramEntry 447 }
audioSilence10L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 10L"
::= { paramEntry 448 }
audioOverload10L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 10 L"
::= { paramEntry 449 }
audioGain10R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 10 R"
::= { paramEntry 450 }
audioMute10R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 10R"
::= { paramEntry 451 }
audioInvert10R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 10R"
::= { paramEntry 452 }
audioSilence10R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 10R"
::= { paramEntry 453 }
audioOverload10R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 10 R"
::= { paramEntry 454 }
audioMixDown10 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 455 }
audioGain11L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 11 L"
::= { paramEntry 456 }
audioMute11L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 11L"
::= { paramEntry 457 }
audioInvert11L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 11L"
::= { paramEntry 458 }
audioSilence11L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 11L"
::= { paramEntry 459 }
audioOverload11L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 11 L"
::= { paramEntry 460 }
audioGain11R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 11 R"
::= { paramEntry 461 }
audioMute11R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 11R"
::= { paramEntry 462 }
audioInvert11R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 11R"
::= { paramEntry 463 }
audioSilence11R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 11R"
::= { paramEntry 464 }
audioOverload11R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 11 R"
::= { paramEntry 465 }
audioMixDown11 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 466 }
audioGain12L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 12 L"
::= { paramEntry 467 }
audioMute12L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 12L"
::= { paramEntry 468 }
audioInvert12L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 12L"
::= { paramEntry 469 }
audioSilence12L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 12L"
::= { paramEntry 470 }
audioOverload12L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 12 L"
::= { paramEntry 471 }
audioGain12R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 12 R"
::= { paramEntry 472 }
audioMute12R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 12R"
::= { paramEntry 473 }
audioInvert12R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 12R"
::= { paramEntry 474 }
audioSilence12R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 12R"
::= { paramEntry 475 }
audioOverload12R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 12 R"
::= { paramEntry 476 }
audioMixDown12 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 477 }
audioGain13L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 13 L"
::= { paramEntry 478 }
audioMute13L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 13L"
::= { paramEntry 479 }
audioInvert13L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 13L"
::= { paramEntry 480 }
audioSilence13L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 13L"
::= { paramEntry 481 }
audioOverload13L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 13 L"
::= { paramEntry 482 }
audioGain13R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 13 R"
::= { paramEntry 483 }
audioMute13R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 13R"
::= { paramEntry 484 }
audioInvert13R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 13R"
::= { paramEntry 485 }
audioSilence13R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 13R"
::= { paramEntry 486 }
audioOverload13R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 13 R"
::= { paramEntry 487 }
audioMixDown13 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 488 }
audioGain14L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 14 L"
::= { paramEntry 489 }
audioMute14L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 14L"
::= { paramEntry 490 }
audioInvert14L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 14L"
::= { paramEntry 491 }
audioSilence14L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 14L"
::= { paramEntry 492 }
audioOverload14L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 14 L"
::= { paramEntry 493 }
audioGain14R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 14 R"
::= { paramEntry 494 }
audioMute14R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 14R"
::= { paramEntry 495 }
audioInvert14R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 14R"
::= { paramEntry 496 }
audioSilence14R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 14R"
::= { paramEntry 497 }
audioOverload14R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 14 R"
::= { paramEntry 498 }
audioMixDown14 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 499 }
audioGain15L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 15 L"
::= { paramEntry 500 }
audioMute15L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 15L"
::= { paramEntry 501 }
audioInvert15L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 15L"
::= { paramEntry 502 }
audioSilence15L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 15L"
::= { paramEntry 503 }
audioOverload15L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 15 L"
::= { paramEntry 504 }
audioGain15R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 15 R"
::= { paramEntry 505 }
audioMute15R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 15R"
::= { paramEntry 506 }
audioInvert15R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 15R"
::= { paramEntry 507 }
audioSilence15R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 15R"
::= { paramEntry 508 }
audioOverload15R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 15 R"
::= { paramEntry 509 }
audioMixDown15 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 510 }
audioGain16L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 16 L"
::= { paramEntry 511 }
audioMute16L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 16L"
::= { paramEntry 512 }
audioInvert16L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 16L"
::= { paramEntry 513 }
audioSilence16L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 16L"
::= { paramEntry 514 }
audioOverload16L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 16 L"
::= { paramEntry 515 }
audioGain16R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 16 R"
::= { paramEntry 516 }
audioMute16R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 16R"
::= { paramEntry 517 }
audioInvert16R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 16R"
::= { paramEntry 518 }
audioSilence16R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 16R"
::= { paramEntry 519 }
audioOverload16R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 16 R"
::= { paramEntry 520 }
audioMixDown16 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 521 }
audioGain17L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 17 L"
::= { paramEntry 522 }
audioMute17L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 17L"
::= { paramEntry 523 }
audioInvert17L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 17L"
::= { paramEntry 524 }
audioSilence17L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 17L"
::= { paramEntry 525 }
audioOverload17L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 17 L"
::= { paramEntry 526 }
audioGain17R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 17 R"
::= { paramEntry 527 }
audioMute17R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 17R"
::= { paramEntry 528 }
audioInvert17R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 17R"
::= { paramEntry 529 }
audioSilence17R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 17R"
::= { paramEntry 530 }
audioOverload17R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 17 R"
::= { paramEntry 531 }
audioMixDown17 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 532 }
audioGain18L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 18 L"
::= { paramEntry 533 }
audioMute18L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 18L"
::= { paramEntry 534 }
audioInvert18L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 18L"
::= { paramEntry 535 }
audioSilence18L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 18L"
::= { paramEntry 536 }
audioOverload18L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 18 L"
::= { paramEntry 537 }
audioGain18R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 18 R"
::= { paramEntry 538 }
audioMute18R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 18R"
::= { paramEntry 539 }
audioInvert18R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 18R"
::= { paramEntry 540 }
audioSilence18R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 18R"
::= { paramEntry 541 }
audioOverload18R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 18 R"
::= { paramEntry 542 }
audioMixDown18 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 543 }
audioGain19L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 19 L"
::= { paramEntry 544 }
audioMute19L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 19L"
::= { paramEntry 545 }
audioInvert19L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 19L"
::= { paramEntry 546 }
audioSilence19L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 19L"
::= { paramEntry 547 }
audioOverload19L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 19 L"
::= { paramEntry 548 }
audioGain19R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 19 R"
::= { paramEntry 549 }
audioMute19R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 19R"
::= { paramEntry 550 }
audioInvert19R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 19R"
::= { paramEntry 551 }
audioSilence19R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 19R"
::= { paramEntry 552 }
audioOverload19R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 19 R"
::= { paramEntry 553 }
audioMixDown19 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 554 }
audioGain20L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 20 L"
::= { paramEntry 555 }
audioMute20L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 20L"
::= { paramEntry 556 }
audioInvert20L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 20L"
::= { paramEntry 557 }
audioSilence20L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 20L"
::= { paramEntry 558 }
audioOverload20L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 20 L"
::= { paramEntry 559 }
audioGain20R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 20 R"
::= { paramEntry 560 }
audioMute20R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 20R"
::= { paramEntry 561 }
audioInvert20R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 20R"
::= { paramEntry 562 }
audioSilence20R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 20R"
::= { paramEntry 563 }
audioOverload20R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 20 R"
::= { paramEntry 564 }
audioMixDown20 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 565 }
bits11 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 1"
::= { paramEntry 566 }
bits12 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 2"
::= { paramEntry 567 }
bits13 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 3"
::= { paramEntry 568 }
bits14 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 4"
::= { paramEntry 569 }
bits21 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 1"
::= { paramEntry 570 }
bits22 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 2"
::= { paramEntry 571 }
bits23 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 3"
::= { paramEntry 572 }
bits24 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 4"
::= { paramEntry 573 }
bits31 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 1"
::= { paramEntry 574 }
bits32 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 2"
::= { paramEntry 575 }
bits33 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 3"
::= { paramEntry 576 }
bits34 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 4"
::= { paramEntry 577 }
sourceAudioOutAES1L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 1L"
::= { paramEntry 578 }
sourceAudioOutAES1R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 1R"
::= { paramEntry 579 }
sourceAudioOutAES2L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 2L"
::= { paramEntry 580 }
sourceAudioOutAES2R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 2R"
::= { paramEntry 581 }
sourceAudioOutAES3L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 3L"
::= { paramEntry 582 }
sourceAudioOutAES3R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 3R"
::= { paramEntry 583 }
sourceAudioOutAES4L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 4L"
::= { paramEntry 584 }
sourceAudioOutAES4R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 4R"
::= { paramEntry 585 }
sourceAudioOutMUX11L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 1 (group 1.1), L"
::= { paramEntry 586 }
sourceAudioOutMUX11R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 1 (group 1.1), R"
::= { paramEntry 587 }
sourceAudioOutMUX12L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 2 (group 1.2), L"
::= { paramEntry 588 }
sourceAudioOutMUX12R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 2 (group 1.2), R"
::= { paramEntry 589 }
sourceAudioOutMUX13L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 3 (group 2.1), L"
::= { paramEntry 590 }
sourceAudioOutMUX13R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 3 (group 2.1), R"
::= { paramEntry 591 }
sourceAudioOutMUX14L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 4 (group 2.2), L"
::= { paramEntry 592 }
sourceAudioOutMUX14R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 4 (group 2.2), R"
::= { paramEntry 593 }
sourceAudioOutMUX15L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 5 (group 3.1), L"
::= { paramEntry 594 }
sourceAudioOutMUX15R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 5 (group 3.1), R"
::= { paramEntry 595 }
sourceAudioOutMUX16L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 6 (group 3.2), L"
::= { paramEntry 596 }
sourceAudioOutMUX16R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 6 (group 3.2), R"
::= { paramEntry 597 }
sourceAudioOutMUX17L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 7 (group 4.1), L"
::= { paramEntry 598 }
sourceAudioOutMUX17R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 7 (group 4.1), R"
::= { paramEntry 599 }
sourceAudioOutMUX18L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 8 (group 4.2), L"
::= { paramEntry 600 }
sourceAudioOutMUX18R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 8 (group 4.2), R"
::= { paramEntry 601 }
sourceAudioOutMUX21L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 1 (group 1.1), L"
::= { paramEntry 602 }
sourceAudioOutMUX21R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 1 (group 1.1), R"
::= { paramEntry 603 }
sourceAudioOutMUX22L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 2 (group 1.2), L"
::= { paramEntry 604 }
sourceAudioOutMUX22R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 2 (group 1.2), R"
::= { paramEntry 605 }
sourceAudioOutMUX23L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 3 (group 2.1), L"
::= { paramEntry 606 }
sourceAudioOutMUX23R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 3 (group 2.1), R"
::= { paramEntry 607 }
sourceAudioOutMUX24L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 4 (group 2.2), L"
::= { paramEntry 608 }
sourceAudioOutMUX24R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 4 (group 2.2), R"
::= { paramEntry 609 }
sourceAudioOutMUX25L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 5 (group 3.1), L"
::= { paramEntry 610 }
sourceAudioOutMUX25R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 5 (group 3.1), R"
::= { paramEntry 611 }
sourceAudioOutMUX26L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 6 (group 3.2), L"
::= { paramEntry 612 }
sourceAudioOutMUX26R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 6 (group 3.2), R"
::= { paramEntry 613 }
sourceAudioOutMUX27L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 7 (group 4.1), L"
::= { paramEntry 614 }
sourceAudioOutMUX27R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 7 (group 4.1), R"
::= { paramEntry 615 }
sourceAudioOutMUX28L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 8 (group 4.2), L"
::= { paramEntry 616 }
sourceAudioOutMUX28R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 8 (group 4.2), R"
::= { paramEntry 617 }
sourceAudioOutMUX31L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 1 (group 1.1), L"
::= { paramEntry 618 }
sourceAudioOutMUX31R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 1 (group 1.1), R"
::= { paramEntry 619 }
sourceAudioOutMUX32L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 2 (group 1.2), L"
::= { paramEntry 620 }
sourceAudioOutMUX32R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 2 (group 1.2), R"
::= { paramEntry 621 }
sourceAudioOutMUX33L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 3 (group 2.1), L"
::= { paramEntry 622 }
sourceAudioOutMUX33R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 3 (group 2.1), R"
::= { paramEntry 623 }
sourceAudioOutMUX34L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 4 (group 2.2), L"
::= { paramEntry 624 }
sourceAudioOutMUX34R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 4 (group 2.2), R"
::= { paramEntry 625 }
sourceAudioOutMUX35L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 5 (group 3.1), L"
::= { paramEntry 626 }
sourceAudioOutMUX35R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 5 (group 3.1), R"
::= { paramEntry 627 }
sourceAudioOutMUX36L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 6 (group 3.2), L"
::= { paramEntry 628 }
sourceAudioOutMUX36R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 6 (group 3.2), R"
::= { paramEntry 629 }
sourceAudioOutMUX37L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 7 (group 4.1), L"
::= { paramEntry 630 }
sourceAudioOutMUX37R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 7 (group 4.1), R"
::= { paramEntry 631 }
sourceAudioOutMUX38L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 8 (group 4.2), L"
::= { paramEntry 632 }
sourceAudioOutMUX38R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 8 (group 4.2), R"
::= { paramEntry 633 }
out1EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 1"
::= { paramEntry 634 }
out1EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 1"
::= { paramEntry 635 }
out1EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 1"
::= { paramEntry 636 }
out1EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 1"
::= { paramEntry 637 }
out2EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 2"
::= { paramEntry 638 }
out2EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 2"
::= { paramEntry 639 }
out2EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 2"
::= { paramEntry 640 }
out2EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 2"
::= { paramEntry 641 }
out3EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 3"
::= { paramEntry 642 }
out3EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 3"
::= { paramEntry 643 }
out3EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 3"
::= { paramEntry 644 }
out3EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 3"
::= { paramEntry 645 }
out1StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 1"
::= { paramEntry 646 }
out1StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 1"
::= { paramEntry 647 }
out1StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 1"
::= { paramEntry 648 }
out1StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 1"
::= { paramEntry 649 }
out2StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 2"
::= { paramEntry 650 }
out2StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 2"
::= { paramEntry 651 }
out2StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 2"
::= { paramEntry 652 }
out2StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 2"
::= { paramEntry 653 }
out3StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 3"
::= { paramEntry 654 }
out3StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 3"
::= { paramEntry 655 }
out3StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 3"
::= { paramEntry 656 }
out3StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 3"
::= { paramEntry 657 }
out1DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 658 }
out1DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 659 }
out1DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 660 }
out1DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 661 }
out2DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 662 }
out2DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 663 }
out2DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 664 }
out2DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 665 }
out3DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 666 }
out3DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 667 }
out3DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 668 }
out3DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 669 }
temperatureMAX1617Int OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PCB temperature (MAX1617) in C"
::= { paramEntry 672 }
temperatureMAX1617Ext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FPGA temperature in C"
::= { paramEntry 673 }
audioDelayAESIn1 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 1"
::= { paramEntry 674 }
audioDelayAESIn2 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 2"
::= { paramEntry 675 }
audioDelayAESIn3 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 3"
::= { paramEntry 676 }
audioDelayAESIn4 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 4"
::= { paramEntry 677 }
audioDelayAESOut1 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 1"
::= { paramEntry 678 }
audioDelayAESOut2 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 2"
::= { paramEntry 679 }
audioDelayAESOut3 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 3"
::= { paramEntry 680 }
audioDelayAESOut4 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 4"
::= { paramEntry 681 }
audioDelaySDI11 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 11"
::= { paramEntry 682 }
audioDelaySDI12 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 12"
::= { paramEntry 683 }
audioDelaySDI13 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 13"
::= { paramEntry 684 }
audioDelaySDI14 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 14"
::= { paramEntry 685 }
audioDelaySDI15 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 15"
::= { paramEntry 686 }
audioDelaySDI16 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 16"
::= { paramEntry 687 }
audioDelaySDI17 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 17"
::= { paramEntry 688 }
audioDelaySDI18 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 18"
::= { paramEntry 689 }
audioDelaySDI21 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 21"
::= { paramEntry 690 }
audioDelaySDI22 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 22"
::= { paramEntry 691 }
audioDelaySDI23 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 23"
::= { paramEntry 692 }
audioDelaySDI24 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 24"
::= { paramEntry 693 }
audioDelaySDI25 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 25"
::= { paramEntry 694 }
audioDelaySDI26 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 26"
::= { paramEntry 695 }
audioDelaySDI27 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 27"
::= { paramEntry 696 }
audioDelaySDI28 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 28"
::= { paramEntry 697 }
audioDelaySDIOut11 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 11"
::= { paramEntry 698 }
audioDelaySDIOut12 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 12"
::= { paramEntry 699 }
audioDelaySDIOut13 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 13"
::= { paramEntry 700 }
audioDelaySDIOut14 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 14"
::= { paramEntry 701 }
audioDelaySDIOut15 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 15"
::= { paramEntry 702 }
audioDelaySDIOut16 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 16"
::= { paramEntry 703 }
audioDelaySDIOut17 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 17"
::= { paramEntry 704 }
audioDelaySDIOut18 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 18"
::= { paramEntry 705 }
audioDelaySDIOut21 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 21"
::= { paramEntry 706 }
audioDelaySDIOut22 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 22"
::= { paramEntry 707 }
audioDelaySDIOut23 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 23"
::= { paramEntry 708 }
audioDelaySDIOut24 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 24"
::= { paramEntry 709 }
audioDelaySDIOut25 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 25"
::= { paramEntry 710 }
audioDelaySDIOut26 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 26"
::= { paramEntry 711 }
audioDelaySDIOut27 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 27"
::= { paramEntry 712 }
audioDelaySDIOut28 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 28"
::= { paramEntry 713 }
audioDelaySDIOut31 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 31"
::= { paramEntry 714 }
audioDelaySDIOut32 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 32"
::= { paramEntry 715 }
audioDelaySDIOut33 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 33"
::= { paramEntry 716 }
audioDelaySDIOut34 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 34"
::= { paramEntry 717 }
audioDelaySDIOut35 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 35"
::= { paramEntry 718 }
audioDelaySDIOut36 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 36"
::= { paramEntry 719 }
audioDelaySDIOut37 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 37"
::= { paramEntry 720 }
audioDelaySDIOut38 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 38"
::= { paramEntry 721 }
videoDelayTracking OBJECT-TYPE
SYNTAX TypeVideoDelayTracking
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alignment of the audiodelay to the SDI-Out(1-3) Videosignal"
::= { paramEntry 722 }
delayPulseAssign OBJECT-TYPE
SYNTAX TypeDelayPulseAssign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign the Delay Pulse Output to one of the SDI Outputs.
The generated Delay Pulse will represent the exact amount of time that the video signal on this output has been delayed from SDI-Input to SDI-Output."
::= { paramEntry 723 }
deembPhaseSync1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
All running channels are reset if one channel is added/removed.
(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)
If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
::= { paramEntry 724 }
deembPhaseSyncVerify1 OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
::= { paramEntry 725 }
deembPhaseSync2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
All running channels are reset if one channel is added/removed.
(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)
If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
::= { paramEntry 726 }
deembPhaseSyncVerify2 OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
::= { paramEntry 727 }
presetsGPIOn OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 728 }
presetsGPIOff OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 729 }
genLockStatus OBJECT-TYPE
SYNTAX TypeGenLockStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lock-Status of LMH1982"
::= { paramEntry 730 }
inputToRefDelay1H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Horizontal delay between Input 1 and Reference"
::= { paramEntry 731 }
inputToRefDelay1V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Vertical delay between Input 1 and Reference"
::= { paramEntry 732 }
inputToRefDelay2H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Horizontal delay between Input 2 and Reference"
::= { paramEntry 733 }
inputToRefDelay2V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Vertical delay between Input 2 and Reference"
::= { paramEntry 734 }
audioContentSDI11 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.1"
::= { paramEntry 735 }
audioContentSDI12 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.2"
::= { paramEntry 736 }
audioContentSDI13 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.3"
::= { paramEntry 737 }
audioContentSDI14 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.4"
::= { paramEntry 738 }
audioContentSDI15 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.5"
::= { paramEntry 739 }
audioContentSDI16 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.6"
::= { paramEntry 740 }
audioContentSDI17 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.7"
::= { paramEntry 741 }
audioContentSDI18 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.8"
::= { paramEntry 742 }
audioContentSDI21 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.1"
::= { paramEntry 743 }
audioContentSDI22 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.2"
::= { paramEntry 744 }
audioContentSDI23 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.3"
::= { paramEntry 745 }
audioContentSDI24 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.4"
::= { paramEntry 746 }
audioContentSDI25 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.5"
::= { paramEntry 747 }
audioContentSDI26 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.6"
::= { paramEntry 748 }
audioContentSDI27 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.7"
::= { paramEntry 749 }
audioContentSDI28 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.8"
::= { paramEntry 750 }
audioContentStatusSDI11 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.1"
::= { paramEntry 751 }
audioContentStatusSDI12 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.2"
::= { paramEntry 752 }
audioContentStatusSDI13 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.3"
::= { paramEntry 753 }
audioContentStatusSDI14 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.4"
::= { paramEntry 754 }
audioContentStatusSDI15 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.5"
::= { paramEntry 755 }
audioContentStatusSDI16 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.6"
::= { paramEntry 756 }
audioContentStatusSDI17 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.7"
::= { paramEntry 757 }
audioContentStatusSDI18 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.8"
::= { paramEntry 758 }
audioContentStatusSDI21 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.1"
::= { paramEntry 759 }
audioContentStatusSDI22 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.2"
::= { paramEntry 760 }
audioContentStatusSDI23 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.3"
::= { paramEntry 761 }
audioContentStatusSDI24 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.4"
::= { paramEntry 762 }
audioContentStatusSDI25 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.5"
::= { paramEntry 763 }
audioContentStatusSDI26 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.6"
::= { paramEntry 764 }
audioContentStatusSDI27 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.7"
::= { paramEntry 765 }
audioContentStatusSDI28 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.8"
::= { paramEntry 766 }
audioContentAES1 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 1"
::= { paramEntry 767 }
audioContentAES2 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 2"
::= { paramEntry 768 }
audioContentAES3 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 3"
::= { paramEntry 769 }
audioContentAES4 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 4"
::= { paramEntry 770 }
audioContentStatusAES1 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 1"
::= { paramEntry 771 }
audioContentStatusAES2 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 2"
::= { paramEntry 772 }
audioContentStatusAES3 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 3"
::= { paramEntry 773 }
audioContentStatusAES4 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 4"
::= { paramEntry 774 }
sDIIn1StatusAFD OBJECT-TYPE
SYNTAX TypeSDIIn1StatusAFD
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected AFD code on SDI input 1"
::= { paramEntry 811 }
sDIIn1StatusWSS OBJECT-TYPE
SYNTAX TypeSDIIn1StatusWSS
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected WSS code on SDI input 1"
::= { paramEntry 812 }
sDIIn1StatusVI OBJECT-TYPE
SYNTAX TypeSDIIn1StatusVI
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected VI code on SDI input 1"
::= { paramEntry 813 }
sDIIn1StatusFormatReactOnChange OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to CHANGE of format description (AFD, WSS, VI) in SDI Input 1 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable."
::= { paramEntry 826 }
sDIIn1StatusFormatReactOnLoss OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to LOSS of format description (AFD, WSS, VI) in SDI Input 1 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable"
::= { paramEntry 827 }
sDIIn2StatusAFD OBJECT-TYPE
SYNTAX TypeSDIIn1StatusAFD
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected AFD code on SDI input 2"
::= { paramEntry 828 }
sDIIn2StatusWSS OBJECT-TYPE
SYNTAX TypeSDIIn1StatusWSS
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected WSS code on SDI input 2"
::= { paramEntry 829 }
sDIIn2StatusVI OBJECT-TYPE
SYNTAX TypeSDIIn1StatusVI
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected VI code on SDI input 2"
::= { paramEntry 830 }
sDIIn2StatusFormatReactOnChange OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to CHANGE of format description (AFD, WSS, VI) in SDI Input 2 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable."
::= { paramEntry 843 }
sDIIn2StatusFormatReactOnLoss OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to LOSS of format description (AFD, WSS, VI) in SDI Input 2 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable"
::= { paramEntry 844 }
snapToReferenceFrameLength OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to ON, the minimum total video processing time is set to be equal to the length of one video-frame of the reference standard. E.g. synchronizing a 720p50 SDI to a 625 REF will delay the SDI by minimum 40ms (instead of 20ms).This mode can only be used with synchronous SDI inputs.The default value is OFF."
::= { paramEntry 845 }
out1ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 846 }
out2ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 847 }
out3ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 848 }
out1FixedProcTime OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: Set the video processing time to a fixed value, independent of the current mode of operation"
::= { paramEntry 849 }
out2FixedProcTime OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: Set the video processing time to a fixed value, independent of the current mode of operation"
::= { paramEntry 850 }
out3FixedProcTime OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: Set the video processing time to a fixed value, independent of the current mode of operation"
::= { paramEntry 851 }
out1DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 1"
::= { paramEntry 852 }
out2DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 2"
::= { paramEntry 853 }
out3DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 3"
::= { paramEntry 854 }
out1FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: specify freeze mode if input is missing."
::= { paramEntry 855 }
out2FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: specify freeze mode if input is missing."
::= { paramEntry 856 }
out3FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: specify freeze mode if input is missing."
::= { paramEntry 857 }
audioDolbyETiming1 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 858 }
audioDolbyETiming2 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 859 }
audioDolbyETiming3 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 860 }
audioDolbyETiming4 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 861 }
out1TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 1"
::= { paramEntry 862 }
out2TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 2"
::= { paramEntry 863 }
out3TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 3"
::= { paramEntry 864 }
presetsNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "maximum number of user presets"
::= { paramEntry 867 }
presetsActive OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select the Active Preset.
NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka Current) and make the required modifications there."
::= { paramEntry 868 }
presetsSaveAs OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
::= { paramEntry 869 }
presetsLoadToCurrent OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "loads selected user preset into the current user settings, all actual user changes will be lost"
::= { paramEntry 870 }
presetsName0 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 0"
::= { paramEntry 871 }
presetsName1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 1"
::= { paramEntry 872 }
presetsName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 2"
::= { paramEntry 873 }
presetsName3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 3"
::= { paramEntry 874 }
presetsName4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 4"
::= { paramEntry 875 }
presetsName5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 5"
::= { paramEntry 876 }
presetsName6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 6"
::= { paramEntry 877 }
presetsName7 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 7"
::= { paramEntry 878 }
out1FrameSyncCompensation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Frame Sync Compensation"
::= { paramEntry 982 }
boardID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "BoardID"
::= { paramEntry 983 }
audioDelayAESOutGang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all AES Out Delay values (modify all delay controls synchronously)"
::= { paramEntry 984 }
audioDelaySDIOut1Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 1 Delay values (modify all delay controls synchronously)"
::= { paramEntry 985 }
audioDelaySDIOut2Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 2 Delay values (modify all delay controls synchronously)"
::= { paramEntry 986 }
audioDelaySDIOut3Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 3 Delay values (modify all delay controls synchronously)"
::= { paramEntry 987 }
eventReferenceNoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Reference No Input"
::= { paramEntry 988 }
eventSDIInput1NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: SDI Input 1 No Input"
::= { paramEntry 989 }
eventSDIInput2NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: SDI Input 2 No Input"
::= { paramEntry 990 }
eventFanFailureSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Fan Failure"
::= { paramEntry 991 }
eventHighTemperatureSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: High Temperature"
::= { paramEntry 992 }
eventCouldnotlocktoSDIInput1SNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to SDI Input 1"
::= { paramEntry 993 }
eventCouldnotlocktoSDIInput2SNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to SDI Input 2"
::= { paramEntry 994 }
eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to Reference"
::= { paramEntry 995 }
eventAESInput1NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 1 No Input"
::= { paramEntry 996 }
eventAESInput2NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 2 No Input"
::= { paramEntry 997 }
eventAESInput3NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 3 No Input"
::= { paramEntry 998 }
eventAESInput4NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 4 No Input"
::= { paramEntry 999 }
eventAESInput1asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 1 asynchronous"
::= { paramEntry 1000 }
eventAESInput2asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 2 asynchronous"
::= { paramEntry 1001 }
eventAESInput3asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 3 asynchronous"
::= { paramEntry 1002 }
eventAESInput4asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 4 asynchronous"
::= { paramEntry 1003 }
conv1InputStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 1"
::= { paramEntry 1004 }
conv2InputStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 2"
::= { paramEntry 1005 }
crossBarAudioIntern OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Mono Crossbar for Internal Audio AES Streams"
::= { paramEntry 1006 }
crossBarAudioOutMUX1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 1"
::= { paramEntry 1007 }
crossBarAudioOutMUX2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 2"
::= { paramEntry 1008 }
crossBarAudioOutMUX3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 3"
::= { paramEntry 1009 }
crossBarAudioOutExtAES OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for External Audio Out AES"
::= { paramEntry 1010 }
sNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial Number"
::= { paramEntry 1011 }
-- Parameter table
paramTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PVD5630-B-D parameters"
::= { sw383 1 }
paramEntry OBJECT-TYPE
SYNTAX ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row in the table of PVD5630-B-D parameters"
INDEX { IMPLIED position }
::= { paramTable 1 }
ParamEntry ::= SEQUENCE {
typeName DisplayString,
displayName DisplayString,
position OCTET STRING,
uptime TimeTicks,
type DisplayString,
version DisplayString,
statusColor TypeStatusColor,
statusColorRGB DisplayString,
statusText DisplayString,
factoryReset TypeFactoryReset,
lock OnOffValue,
locate OnOffValue,
eventReferenceNoInput OnOffValue,
eventSDIInput1NoInput OnOffValue,
eventSDIInput2NoInput OnOffValue,
eventFanFailure OnOffValue,
eventHighTemperature OnOffValue,
eventCouldnotlocktoSDIInput1 OnOffValue,
eventCouldnotlocktoSDIInput2 OnOffValue,
eventCouldnotlocktoReference OnOffValue,
eventAESInput1NoInput OnOffValue,
eventAESInput2NoInput OnOffValue,
eventAESInput3NoInput OnOffValue,
eventAESInput4NoInput OnOffValue,
eventAESInput1asynchronous OnOffValue,
eventAESInput2asynchronous OnOffValue,
eventAESInput3asynchronous OnOffValue,
eventAESInput4asynchronous OnOffValue,
channel2CoupleTo1 OnOffValue,
channel3CoupleTo1 OnOffValue,
referenceLock TypeReferenceLock,
referenceStatus TypeReferenceStatus,
referenceSource TypeReferenceSource,
freqPreselect TypeFreqPreselect,
freq TypeFreq,
gPIFunc TypeGPIFunc,
syncMode1 TypeSyncMode1,
inputStatusSDI1 TypeReferenceStatus,
inputFreezeSDI1 TypeInputFreezeSDI1,
syncSDIIn1 OnOffValue,
syncMode2 TypeSyncMode1,
inputStatusSDI2 TypeReferenceStatus,
inputFreezeSDI2 TypeInputFreezeSDI1,
syncSDIIn2 OnOffValue,
conv1Source TypeConv1Source,
conv1ControlMode TypeConv1ControlMode,
conv1AspectInSelect TypeConv1AspectInSelect,
conv1AspectIn TypeConv1AspectIn,
conv1FormatOut TypeConv1FormatOut,
conv1StatusOut TypeConv1StatusOut,
conv1Mode TypeConv1Mode,
conv1OutInsertAFD OnOffValue,
conv1OutInsertVI OnOffValue,
conv1OutInsertWSS OnOffValue,
conv1StatusIn TypeConv1StatusOut,
conv2Source TypeConv1Source,
conv2ControlMode TypeConv1ControlMode,
conv2AspectInSelect TypeConv1AspectInSelect,
conv2AspectIn TypeConv1AspectIn,
conv2FormatOut TypeConv1FormatOut,
conv2StatusOut TypeConv1StatusOut,
conv2Mode TypeConv1Mode,
conv2OutInsertAFD OnOffValue,
conv2OutInsertVI OnOffValue,
conv2OutInsertWSS OnOffValue,
conv2StatusIn TypeConv1StatusOut,
conv1MetaAdvancedSettings OnOffValue,
conv1MetaCCSourceDefaultPriorities OnOffValue,
conv1MetaTCSourceDefaultPriorities OnOffValue,
conv1MetaAFDInStatus TypeConv1MetaAFDInStatus,
conv1MetaVIInStatus TypeConv1MetaAFDInStatus,
conv1MetaWSSInStatus TypeConv1MetaAFDInStatus,
conv1MetaCCCDPOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaCCCDPInStatus TypeConv1MetaAFDInStatus,
conv1MetaCCCDPInsertion OnOffValue,
conv1MetaCCCDPSourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv1MetaCCCDPSourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaCCCDPSourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaCCRAWOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaCCRAWInStatus TypeConv1MetaAFDInStatus,
conv1MetaCCRAWInsertion OnOffValue,
conv1MetaCCRAWSourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv1MetaCCRAWSourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaCCRAWSourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaCCL21OutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaCCL21InStatus TypeConv1MetaAFDInStatus,
conv1MetaCCL21Insertion OnOffValue,
conv1MetaCCL21SourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv1MetaCCL21SourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaCCL21SourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaTCLTCInStatus TypeConv1MetaAFDInStatus,
conv1MetaTCLTCInsertion OnOffValue,
conv1MetaTCLTCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv1MetaTCLTCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCLTCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCVITCInStatus TypeConv1MetaAFDInStatus,
conv1MetaTCVITCInsertion OnOffValue,
conv1MetaTCVITCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv1MetaTCVITCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCVITCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCDVITCInStatus TypeConv1MetaTCDVITCInStatus,
conv1MetaTCDVITCInsertion OnOffValue,
conv1MetaTCDVITCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv1MetaTCDVITCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCDVITCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCLTCOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaTCVITCOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaTCDVITCAOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaTCDVITCBOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaTCDVITCADestination625 TypeConv1MetaTCDVITCADestination625,
conv1MetaTCDVITCBDestination625 TypeConv1MetaTCDVITCADestination625,
conv1MetaTCDVITCADestination525 TypeConv1MetaTCDVITCADestination625,
conv1MetaTCDVITCBDestination525 TypeConv1MetaTCDVITCADestination625,
conv1MetaTCDVITCADetectedSrcLine Integer32,
conv1MetaTCDVITCBDetectedSrcLine Integer32,
conv1MetaTCVITCDetectedDVITCLine Integer32,
conv1MetaTCDVITCAutomatic OnOffValue,
conv1ModeAutoARto169 TypeConv1ModeAutoARto169,
conv1ModeAutoARto43 TypeConv1ModeAutoARto169,
conv1InsertAFDFullFrame169 TypeConv1InsertAFDFullFrame169,
conv1ModeAutoFallback TypeConv1ModeAutoFallback,
conv2MetaAdvancedSettings OnOffValue,
conv2MetaCCSourceDefaultPriorities OnOffValue,
conv2MetaTCSourceDefaultPriorities OnOffValue,
conv2MetaAFDInStatus TypeConv1MetaAFDInStatus,
conv2MetaVIInStatus TypeConv1MetaAFDInStatus,
conv2MetaWSSInStatus TypeConv1MetaAFDInStatus,
conv2MetaCCCDPOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaCCCDPInStatus TypeConv1MetaAFDInStatus,
conv2MetaCCCDPInsertion OnOffValue,
conv2MetaCCCDPSourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv2MetaCCCDPSourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaCCCDPSourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaCCRAWOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaCCRAWInStatus TypeConv1MetaAFDInStatus,
conv2MetaCCRAWInsertion OnOffValue,
conv2MetaCCRAWSourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv2MetaCCRAWSourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaCCRAWSourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaCCL21OutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaCCL21InStatus TypeConv1MetaAFDInStatus,
conv2MetaCCL21Insertion OnOffValue,
conv2MetaCCL21SourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv2MetaCCL21SourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaCCL21SourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaTCLTCInStatus TypeConv1MetaAFDInStatus,
conv2MetaTCLTCInsertion OnOffValue,
conv2MetaTCLTCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv2MetaTCLTCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCLTCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCVITCInStatus TypeConv1MetaAFDInStatus,
conv2MetaTCVITCInsertion OnOffValue,
conv2MetaTCVITCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv2MetaTCVITCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCVITCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCDVITCInStatus TypeConv1MetaTCDVITCInStatus,
conv2MetaTCDVITCInsertion OnOffValue,
conv2MetaTCDVITCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv2MetaTCDVITCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCDVITCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCLTCOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaTCVITCOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaTCDVITCAOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaTCDVITCBOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaTCDVITCADestination625 TypeConv1MetaTCDVITCADestination625,
conv2MetaTCDVITCBDestination625 TypeConv1MetaTCDVITCADestination625,
conv2MetaTCDVITCADestination525 TypeConv1MetaTCDVITCADestination625,
conv2MetaTCDVITCBDestination525 TypeConv1MetaTCDVITCADestination625,
conv2MetaTCDVITCADetectedSrcLine Integer32,
conv2MetaTCDVITCBDetectedSrcLine Integer32,
conv2MetaTCVITCDetectedDVITCLine Integer32,
conv2MetaTCDVITCAutomatic OnOffValue,
conv2ModeAutoARto169 TypeConv1ModeAutoARto169,
conv2ModeAutoARto43 TypeConv1ModeAutoARto169,
conv2InsertAFDFullFrame169 TypeConv1InsertAFDFullFrame169,
conv2ModeAutoFallback TypeConv1ModeAutoFallback,
sDIIn1TCDVITCASource625 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource625 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCASource525 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource525 TypeSDIIn1TCDVITCASource625,
sDIIn2TCDVITCASource625 TypeSDIIn1TCDVITCASource625,
sDIIn2TCDVITCBSource625 TypeSDIIn1TCDVITCASource625,
sDIIn2TCDVITCASource525 TypeSDIIn1TCDVITCASource625,
sDIIn2TCDVITCBSource525 TypeSDIIn1TCDVITCASource625,
sDIIn1CCCDPStatus TypeConv1MetaAFDInStatus,
sDIIn1CCRAWStatus TypeConv1MetaAFDInStatus,
sDIIn1CCL21Status TypeConv1MetaAFDInStatus,
sDIIn1TCLTCStatus TypeConv1MetaAFDInStatus,
sDIIn1TCVITCStatus TypeConv1MetaAFDInStatus,
sDIIn1TCDVITCStatus TypeConv1MetaTCDVITCInStatus,
sDIIn2CCCDPStatus TypeConv1MetaAFDInStatus,
sDIIn2CCRAWStatus TypeConv1MetaAFDInStatus,
sDIIn2CCL21Status TypeConv1MetaAFDInStatus,
sDIIn2TCLTCStatus TypeConv1MetaAFDInStatus,
sDIIn2TCVITCStatus TypeConv1MetaAFDInStatus,
sDIIn2TCDVITCStatus TypeConv1MetaTCDVITCInStatus,
out1Assign TypeOut1Assign,
out1Standard TypeConv1StatusOut,
out2Assign TypeOut1Assign,
out2Standard TypeConv1StatusOut,
out3Assign TypeOut1Assign,
out3Standard TypeConv1StatusOut,
out4Assign TypeConv1Source,
out4Standard TypeConv1StatusOut,
out1DelayFrames Integer32,
out1DelayLines Integer32,
out1DelayPixel Integer32,
out1DelayMs FixedPointValue3,
out1ApertureEnable OnOffValue,
out1ApertureLevel Integer32,
out1HBlank OnOffValue,
out1VBlank OnOffValue,
out1Gain Integer32,
out1Saturation Integer32,
out1BlackLevel FixedPointValue1,
out1Hue FixedPointValue1,
out1TestPatternSelect TypeOut1TestPatternSelect,
out1TestPatternStd TypeOut1TestPatternStd,
out1TestPatternOn OnOffValue,
out1CSC TypeOut1CSC,
out1CSCMode TypeOut1CSCMode,
out1IfNoInput TypeOut1IfNoInput,
out2DelayFrames Integer32,
out2DelayLines Integer32,
out2DelayPixel Integer32,
out2DelayMs FixedPointValue3,
out2ApertureEnable OnOffValue,
out2ApertureLevel Integer32,
out2HBlank OnOffValue,
out2VBlank OnOffValue,
out2Gain Integer32,
out2Saturation Integer32,
out2BlackLevel FixedPointValue1,
out2Hue FixedPointValue1,
out2TestPatternSelect TypeOut1TestPatternSelect,
out2TestPatternStd TypeOut1TestPatternStd,
out2TestPatternOn OnOffValue,
out2CSC TypeOut1CSC,
out2CSCMode TypeOut1CSCMode,
out2IfNoInput TypeOut1IfNoInput,
out3DelayFrames Integer32,
out3DelayLines Integer32,
out3DelayPixel Integer32,
out3DelayMs FixedPointValue3,
out3ApertureEnable OnOffValue,
out3ApertureLevel Integer32,
out3HBlank OnOffValue,
out3VBlank OnOffValue,
out3Gain Integer32,
out3Saturation Integer32,
out3BlackLevel FixedPointValue1,
out3Hue FixedPointValue1,
out3TestPatternSelect TypeOut1TestPatternSelect,
out3TestPatternStd TypeOut1TestPatternStd,
out3TestPatternOn OnOffValue,
out3CSC TypeOut1CSC,
out3CSCMode TypeOut1CSCMode,
out3IfNoInput TypeOut1IfNoInput,
inputStatusAES1 TypeInputStatusAES1,
inputStatusAES2 TypeInputStatusAES1,
inputStatusAES3 TypeInputStatusAES1,
inputStatusAES4 TypeInputStatusAES1,
sourceInternAudio1 TypeSourceInternAudio1,
sourceInternAudio2 TypeSourceInternAudio1,
sourceInternAudio3 TypeSourceInternAudio1,
sourceInternAudio4 TypeSourceInternAudio1,
sourceInternAudio5 TypeSourceInternAudio1,
sourceInternAudio6 TypeSourceInternAudio1,
sourceInternAudio7 TypeSourceInternAudio1,
sourceInternAudio8 TypeSourceInternAudio1,
sourceInternAudio9 TypeSourceInternAudio1,
sourceInternAudio10 TypeSourceInternAudio1,
sourceInternAudio11 TypeSourceInternAudio1,
sourceInternAudio12 TypeSourceInternAudio1,
sourceInternAudio13 TypeSourceInternAudio1,
sourceInternAudio14 TypeSourceInternAudio1,
sourceInternAudio15 TypeSourceInternAudio1,
sourceInternAudio16 TypeSourceInternAudio1,
sourceInternAudio17 TypeSourceInternAudio1,
sourceInternAudio18 TypeSourceInternAudio1,
sourceInternAudio19 TypeSourceInternAudio1,
sourceInternAudio20 TypeSourceInternAudio1,
sourceInternAudioDirect11 TypeSourceInternAudioDirect11,
sourceInternAudioDirect12 TypeSourceInternAudioDirect11,
sourceInternAudioDirect13 TypeSourceInternAudioDirect11,
sourceInternAudioDirect14 TypeSourceInternAudioDirect11,
sourceInternAudioDirect21 TypeSourceInternAudioDirect21,
sourceInternAudioDirect22 TypeSourceInternAudioDirect21,
sourceInternAudioDirect23 TypeSourceInternAudioDirect21,
sourceInternAudioDirect24 TypeSourceInternAudioDirect21,
sRC1 OnOffValue,
sRC2 OnOffValue,
sRC3 OnOffValue,
sRC4 OnOffValue,
sRC5 OnOffValue,
sRC6 OnOffValue,
sRC7 OnOffValue,
sRC8 OnOffValue,
audioGain1L FixedPointValue1,
audioMute1L TypeAudioMute1L,
audioInvert1L TypeAudioInvert1L,
audioSilence1L TypeAudioSilence1L,
audioOverload1L TypeAudioOverload1L,
audioGain1R FixedPointValue1,
audioMute1R TypeAudioMute1L,
audioInvert1R TypeAudioInvert1L,
audioSilence1R TypeAudioSilence1L,
audioOverload1R TypeAudioOverload1L,
audioMixDown1 OnOffValue,
audioGain2L FixedPointValue1,
audioMute2L TypeAudioMute1L,
audioInvert2L TypeAudioInvert1L,
audioSilence2L TypeAudioSilence1L,
audioOverload2L TypeAudioOverload1L,
audioGain2R FixedPointValue1,
audioMute2R TypeAudioMute1L,
audioInvert2R TypeAudioInvert1L,
audioSilence2R TypeAudioSilence1L,
audioOverload2R TypeAudioOverload1L,
audioMixDown2 OnOffValue,
audioGain3L FixedPointValue1,
audioMute3L TypeAudioMute1L,
audioInvert3L TypeAudioInvert1L,
audioSilence3L TypeAudioSilence1L,
audioOverload3L TypeAudioOverload1L,
audioGain3R FixedPointValue1,
audioMute3R TypeAudioMute1L,
audioInvert3R TypeAudioInvert1L,
audioSilence3R TypeAudioSilence1L,
audioOverload3R TypeAudioOverload1L,
audioMixDown3 OnOffValue,
audioGain4L FixedPointValue1,
audioMute4L TypeAudioMute1L,
audioInvert4L TypeAudioInvert1L,
audioSilence4L TypeAudioSilence1L,
audioOverload4L TypeAudioOverload1L,
audioGain4R FixedPointValue1,
audioMute4R TypeAudioMute1L,
audioInvert4R TypeAudioInvert1L,
audioSilence4R TypeAudioSilence1L,
audioOverload4R TypeAudioOverload1L,
audioMixDown4 OnOffValue,
audioGain5L FixedPointValue1,
audioMute5L TypeAudioMute1L,
audioInvert5L TypeAudioInvert1L,
audioSilence5L TypeAudioSilence1L,
audioOverload5L TypeAudioOverload1L,
audioGain5R FixedPointValue1,
audioMute5R TypeAudioMute1L,
audioInvert5R TypeAudioInvert1L,
audioSilence5R TypeAudioSilence1L,
audioOverload5R TypeAudioOverload1L,
audioMixDown5 OnOffValue,
audioGain6L FixedPointValue1,
audioMute6L TypeAudioMute1L,
audioInvert6L TypeAudioInvert1L,
audioSilence6L TypeAudioSilence1L,
audioOverload6L TypeAudioOverload1L,
audioGain6R FixedPointValue1,
audioMute6R TypeAudioMute1L,
audioInvert6R TypeAudioInvert1L,
audioSilence6R TypeAudioSilence1L,
audioOverload6R TypeAudioOverload1L,
audioMixDown6 OnOffValue,
audioGain7L FixedPointValue1,
audioMute7L TypeAudioMute1L,
audioInvert7L TypeAudioInvert1L,
audioSilence7L TypeAudioSilence1L,
audioOverload7L TypeAudioOverload1L,
audioGain7R FixedPointValue1,
audioMute7R TypeAudioMute1L,
audioInvert7R TypeAudioInvert1L,
audioSilence7R TypeAudioSilence1L,
audioOverload7R TypeAudioOverload1L,
audioMixDown7 OnOffValue,
audioGain8L FixedPointValue1,
audioMute8L TypeAudioMute1L,
audioInvert8L TypeAudioInvert1L,
audioSilence8L TypeAudioSilence1L,
audioOverload8L TypeAudioOverload1L,
audioGain8R FixedPointValue1,
audioMute8R TypeAudioMute1L,
audioInvert8R TypeAudioInvert1L,
audioSilence8R TypeAudioSilence1L,
audioOverload8R TypeAudioOverload1L,
audioMixDown8 OnOffValue,
audioGain9L FixedPointValue1,
audioMute9L TypeAudioMute1L,
audioInvert9L TypeAudioInvert1L,
audioSilence9L TypeAudioSilence1L,
audioOverload9L TypeAudioOverload1L,
audioGain9R FixedPointValue1,
audioMute9R TypeAudioMute1L,
audioInvert9R TypeAudioInvert1L,
audioSilence9R TypeAudioSilence1L,
audioOverload9R TypeAudioOverload1L,
audioMixDown9 OnOffValue,
audioGain10L FixedPointValue1,
audioMute10L TypeAudioMute1L,
audioInvert10L TypeAudioInvert1L,
audioSilence10L TypeAudioSilence1L,
audioOverload10L TypeAudioOverload1L,
audioGain10R FixedPointValue1,
audioMute10R TypeAudioMute1L,
audioInvert10R TypeAudioInvert1L,
audioSilence10R TypeAudioSilence1L,
audioOverload10R TypeAudioOverload1L,
audioMixDown10 OnOffValue,
audioGain11L FixedPointValue1,
audioMute11L TypeAudioMute1L,
audioInvert11L TypeAudioInvert1L,
audioSilence11L TypeAudioSilence1L,
audioOverload11L TypeAudioOverload1L,
audioGain11R FixedPointValue1,
audioMute11R TypeAudioMute1L,
audioInvert11R TypeAudioInvert1L,
audioSilence11R TypeAudioSilence1L,
audioOverload11R TypeAudioOverload1L,
audioMixDown11 OnOffValue,
audioGain12L FixedPointValue1,
audioMute12L TypeAudioMute1L,
audioInvert12L TypeAudioInvert1L,
audioSilence12L TypeAudioSilence1L,
audioOverload12L TypeAudioOverload1L,
audioGain12R FixedPointValue1,
audioMute12R TypeAudioMute1L,
audioInvert12R TypeAudioInvert1L,
audioSilence12R TypeAudioSilence1L,
audioOverload12R TypeAudioOverload1L,
audioMixDown12 OnOffValue,
audioGain13L FixedPointValue1,
audioMute13L TypeAudioMute1L,
audioInvert13L TypeAudioInvert1L,
audioSilence13L TypeAudioSilence1L,
audioOverload13L TypeAudioOverload1L,
audioGain13R FixedPointValue1,
audioMute13R TypeAudioMute1L,
audioInvert13R TypeAudioInvert1L,
audioSilence13R TypeAudioSilence1L,
audioOverload13R TypeAudioOverload1L,
audioMixDown13 OnOffValue,
audioGain14L FixedPointValue1,
audioMute14L TypeAudioMute1L,
audioInvert14L TypeAudioInvert1L,
audioSilence14L TypeAudioSilence1L,
audioOverload14L TypeAudioOverload1L,
audioGain14R FixedPointValue1,
audioMute14R TypeAudioMute1L,
audioInvert14R TypeAudioInvert1L,
audioSilence14R TypeAudioSilence1L,
audioOverload14R TypeAudioOverload1L,
audioMixDown14 OnOffValue,
audioGain15L FixedPointValue1,
audioMute15L TypeAudioMute1L,
audioInvert15L TypeAudioInvert1L,
audioSilence15L TypeAudioSilence1L,
audioOverload15L TypeAudioOverload1L,
audioGain15R FixedPointValue1,
audioMute15R TypeAudioMute1L,
audioInvert15R TypeAudioInvert1L,
audioSilence15R TypeAudioSilence1L,
audioOverload15R TypeAudioOverload1L,
audioMixDown15 OnOffValue,
audioGain16L FixedPointValue1,
audioMute16L TypeAudioMute1L,
audioInvert16L TypeAudioInvert1L,
audioSilence16L TypeAudioSilence1L,
audioOverload16L TypeAudioOverload1L,
audioGain16R FixedPointValue1,
audioMute16R TypeAudioMute1L,
audioInvert16R TypeAudioInvert1L,
audioSilence16R TypeAudioSilence1L,
audioOverload16R TypeAudioOverload1L,
audioMixDown16 OnOffValue,
audioGain17L FixedPointValue1,
audioMute17L TypeAudioMute1L,
audioInvert17L TypeAudioInvert1L,
audioSilence17L TypeAudioSilence1L,
audioOverload17L TypeAudioOverload1L,
audioGain17R FixedPointValue1,
audioMute17R TypeAudioMute1L,
audioInvert17R TypeAudioInvert1L,
audioSilence17R TypeAudioSilence1L,
audioOverload17R TypeAudioOverload1L,
audioMixDown17 OnOffValue,
audioGain18L FixedPointValue1,
audioMute18L TypeAudioMute1L,
audioInvert18L TypeAudioInvert1L,
audioSilence18L TypeAudioSilence1L,
audioOverload18L TypeAudioOverload1L,
audioGain18R FixedPointValue1,
audioMute18R TypeAudioMute1L,
audioInvert18R TypeAudioInvert1L,
audioSilence18R TypeAudioSilence1L,
audioOverload18R TypeAudioOverload1L,
audioMixDown18 OnOffValue,
audioGain19L FixedPointValue1,
audioMute19L TypeAudioMute1L,
audioInvert19L TypeAudioInvert1L,
audioSilence19L TypeAudioSilence1L,
audioOverload19L TypeAudioOverload1L,
audioGain19R FixedPointValue1,
audioMute19R TypeAudioMute1L,
audioInvert19R TypeAudioInvert1L,
audioSilence19R TypeAudioSilence1L,
audioOverload19R TypeAudioOverload1L,
audioMixDown19 OnOffValue,
audioGain20L FixedPointValue1,
audioMute20L TypeAudioMute1L,
audioInvert20L TypeAudioInvert1L,
audioSilence20L TypeAudioSilence1L,
audioOverload20L TypeAudioOverload1L,
audioGain20R FixedPointValue1,
audioMute20R TypeAudioMute1L,
audioInvert20R TypeAudioInvert1L,
audioSilence20R TypeAudioSilence1L,
audioOverload20R TypeAudioOverload1L,
audioMixDown20 OnOffValue,
bits11 TypeBits11,
bits12 TypeBits11,
bits13 TypeBits11,
bits14 TypeBits11,
bits21 TypeBits11,
bits22 TypeBits11,
bits23 TypeBits11,
bits24 TypeBits11,
bits31 TypeBits11,
bits32 TypeBits11,
bits33 TypeBits11,
bits34 TypeBits11,
sourceAudioOutAES1L TypeSourceAudioOutAES1L,
sourceAudioOutAES1R TypeSourceAudioOutAES1L,
sourceAudioOutAES2L TypeSourceAudioOutAES1L,
sourceAudioOutAES2R TypeSourceAudioOutAES1L,
sourceAudioOutAES3L TypeSourceAudioOutAES1L,
sourceAudioOutAES3R TypeSourceAudioOutAES1L,
sourceAudioOutAES4L TypeSourceAudioOutAES1L,
sourceAudioOutAES4R TypeSourceAudioOutAES1L,
sourceAudioOutMUX11L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX11R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX12L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX12R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX13L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX13R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX14L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX14R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX15L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX15R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX16L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX16R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX17L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX17R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX18L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX18R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX21L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX21R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX22L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX22R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX23L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX23R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX24L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX24R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX25L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX25R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX26L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX26R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX27L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX27R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX28L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX28R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX31L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX31R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX32L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX32R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX33L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX33R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX34L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX34R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX35L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX35R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX36L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX36R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX37L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX37R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX38L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX38R TypeSourceAudioOutMUX11L,
out1EmbedGroup1 OnOffValue,
out1EmbedGroup2 OnOffValue,
out1EmbedGroup3 OnOffValue,
out1EmbedGroup4 OnOffValue,
out2EmbedGroup1 OnOffValue,
out2EmbedGroup2 OnOffValue,
out2EmbedGroup3 OnOffValue,
out2EmbedGroup4 OnOffValue,
out3EmbedGroup1 OnOffValue,
out3EmbedGroup2 OnOffValue,
out3EmbedGroup3 OnOffValue,
out3EmbedGroup4 OnOffValue,
out1StatusGroup1 TypeOut1StatusGroup1,
out1StatusGroup2 TypeOut1StatusGroup1,
out1StatusGroup3 TypeOut1StatusGroup1,
out1StatusGroup4 TypeOut1StatusGroup1,
out2StatusGroup1 TypeOut1StatusGroup1,
out2StatusGroup2 TypeOut1StatusGroup1,
out2StatusGroup3 TypeOut1StatusGroup1,
out2StatusGroup4 TypeOut1StatusGroup1,
out3StatusGroup1 TypeOut1StatusGroup1,
out3StatusGroup2 TypeOut1StatusGroup1,
out3StatusGroup3 TypeOut1StatusGroup1,
out3StatusGroup4 TypeOut1StatusGroup1,
out1DeleteGroup1 TypeOut1DeleteGroup1,
out1DeleteGroup2 TypeOut1DeleteGroup1,
out1DeleteGroup3 TypeOut1DeleteGroup1,
out1DeleteGroup4 TypeOut1DeleteGroup1,
out2DeleteGroup1 TypeOut1DeleteGroup1,
out2DeleteGroup2 TypeOut1DeleteGroup1,
out2DeleteGroup3 TypeOut1DeleteGroup1,
out2DeleteGroup4 TypeOut1DeleteGroup1,
out3DeleteGroup1 TypeOut1DeleteGroup1,
out3DeleteGroup2 TypeOut1DeleteGroup1,
out3DeleteGroup3 TypeOut1DeleteGroup1,
out3DeleteGroup4 TypeOut1DeleteGroup1,
temperatureMAX1617Int Integer32,
temperatureMAX1617Ext Integer32,
audioDelayAESIn1 FixedPointValue2,
audioDelayAESIn2 FixedPointValue2,
audioDelayAESIn3 FixedPointValue2,
audioDelayAESIn4 FixedPointValue2,
audioDelayAESOut1 FixedPointValue2,
audioDelayAESOut2 FixedPointValue2,
audioDelayAESOut3 FixedPointValue2,
audioDelayAESOut4 FixedPointValue2,
audioDelaySDI11 FixedPointValue2,
audioDelaySDI12 FixedPointValue2,
audioDelaySDI13 FixedPointValue2,
audioDelaySDI14 FixedPointValue2,
audioDelaySDI15 FixedPointValue2,
audioDelaySDI16 FixedPointValue2,
audioDelaySDI17 FixedPointValue2,
audioDelaySDI18 FixedPointValue2,
audioDelaySDI21 FixedPointValue2,
audioDelaySDI22 FixedPointValue2,
audioDelaySDI23 FixedPointValue2,
audioDelaySDI24 FixedPointValue2,
audioDelaySDI25 FixedPointValue2,
audioDelaySDI26 FixedPointValue2,
audioDelaySDI27 FixedPointValue2,
audioDelaySDI28 FixedPointValue2,
audioDelaySDIOut11 FixedPointValue2,
audioDelaySDIOut12 FixedPointValue2,
audioDelaySDIOut13 FixedPointValue2,
audioDelaySDIOut14 FixedPointValue2,
audioDelaySDIOut15 FixedPointValue2,
audioDelaySDIOut16 FixedPointValue2,
audioDelaySDIOut17 FixedPointValue2,
audioDelaySDIOut18 FixedPointValue2,
audioDelaySDIOut21 FixedPointValue2,
audioDelaySDIOut22 FixedPointValue2,
audioDelaySDIOut23 FixedPointValue2,
audioDelaySDIOut24 FixedPointValue2,
audioDelaySDIOut25 FixedPointValue2,
audioDelaySDIOut26 FixedPointValue2,
audioDelaySDIOut27 FixedPointValue2,
audioDelaySDIOut28 FixedPointValue2,
audioDelaySDIOut31 FixedPointValue2,
audioDelaySDIOut32 FixedPointValue2,
audioDelaySDIOut33 FixedPointValue2,
audioDelaySDIOut34 FixedPointValue2,
audioDelaySDIOut35 FixedPointValue2,
audioDelaySDIOut36 FixedPointValue2,
audioDelaySDIOut37 FixedPointValue2,
audioDelaySDIOut38 FixedPointValue2,
videoDelayTracking TypeVideoDelayTracking,
delayPulseAssign TypeDelayPulseAssign,
deembPhaseSync1 OnOffValue,
deembPhaseSyncVerify1 TypeDeembPhaseSyncVerify1,
deembPhaseSync2 OnOffValue,
deembPhaseSyncVerify2 TypeDeembPhaseSyncVerify1,
presetsGPIOn TypePresetsGPIOn,
presetsGPIOff TypePresetsGPIOn,
genLockStatus TypeGenLockStatus,
inputToRefDelay1H Integer32,
inputToRefDelay1V Integer32,
inputToRefDelay2H Integer32,
inputToRefDelay2V Integer32,
audioContentSDI11 TypeAudioContentSDI11,
audioContentSDI12 TypeAudioContentSDI11,
audioContentSDI13 TypeAudioContentSDI11,
audioContentSDI14 TypeAudioContentSDI11,
audioContentSDI15 TypeAudioContentSDI11,
audioContentSDI16 TypeAudioContentSDI11,
audioContentSDI17 TypeAudioContentSDI11,
audioContentSDI18 TypeAudioContentSDI11,
audioContentSDI21 TypeAudioContentSDI11,
audioContentSDI22 TypeAudioContentSDI11,
audioContentSDI23 TypeAudioContentSDI11,
audioContentSDI24 TypeAudioContentSDI11,
audioContentSDI25 TypeAudioContentSDI11,
audioContentSDI26 TypeAudioContentSDI11,
audioContentSDI27 TypeAudioContentSDI11,
audioContentSDI28 TypeAudioContentSDI11,
audioContentStatusSDI11 TypeAudioContentStatusSDI11,
audioContentStatusSDI12 TypeAudioContentStatusSDI11,
audioContentStatusSDI13 TypeAudioContentStatusSDI11,
audioContentStatusSDI14 TypeAudioContentStatusSDI11,
audioContentStatusSDI15 TypeAudioContentStatusSDI11,
audioContentStatusSDI16 TypeAudioContentStatusSDI11,
audioContentStatusSDI17 TypeAudioContentStatusSDI11,
audioContentStatusSDI18 TypeAudioContentStatusSDI11,
audioContentStatusSDI21 TypeAudioContentStatusSDI11,
audioContentStatusSDI22 TypeAudioContentStatusSDI11,
audioContentStatusSDI23 TypeAudioContentStatusSDI11,
audioContentStatusSDI24 TypeAudioContentStatusSDI11,
audioContentStatusSDI25 TypeAudioContentStatusSDI11,
audioContentStatusSDI26 TypeAudioContentStatusSDI11,
audioContentStatusSDI27 TypeAudioContentStatusSDI11,
audioContentStatusSDI28 TypeAudioContentStatusSDI11,
audioContentAES1 TypeAudioContentSDI11,
audioContentAES2 TypeAudioContentSDI11,
audioContentAES3 TypeAudioContentSDI11,
audioContentAES4 TypeAudioContentSDI11,
audioContentStatusAES1 TypeAudioContentStatusSDI11,
audioContentStatusAES2 TypeAudioContentStatusSDI11,
audioContentStatusAES3 TypeAudioContentStatusSDI11,
audioContentStatusAES4 TypeAudioContentStatusSDI11,
sDIIn1StatusAFD TypeSDIIn1StatusAFD,
sDIIn1StatusWSS TypeSDIIn1StatusWSS,
sDIIn1StatusVI TypeSDIIn1StatusVI,
sDIIn1StatusFormatReactOnChange TypeSDIIn1StatusFormatReactOnChange,
sDIIn1StatusFormatReactOnLoss TypeSDIIn1StatusFormatReactOnChange,
sDIIn2StatusAFD TypeSDIIn1StatusAFD,
sDIIn2StatusWSS TypeSDIIn1StatusWSS,
sDIIn2StatusVI TypeSDIIn1StatusVI,
sDIIn2StatusFormatReactOnChange TypeSDIIn1StatusFormatReactOnChange,
sDIIn2StatusFormatReactOnLoss TypeSDIIn1StatusFormatReactOnChange,
snapToReferenceFrameLength OnOffValue,
out1ClipHeadroom OnOffValue,
out2ClipHeadroom OnOffValue,
out3ClipHeadroom OnOffValue,
out1FixedProcTime OnOffValue,
out2FixedProcTime OnOffValue,
out3FixedProcTime OnOffValue,
out1DelayMode TypeOut1DelayMode,
out2DelayMode TypeOut1DelayMode,
out3DelayMode TypeOut1DelayMode,
out1FreezeMode TypeOut1FreezeMode,
out2FreezeMode TypeOut1FreezeMode,
out3FreezeMode TypeOut1FreezeMode,
audioDolbyETiming1 TypeAudioDolbyETiming1,
audioDolbyETiming2 TypeAudioDolbyETiming1,
audioDolbyETiming3 TypeAudioDolbyETiming1,
audioDolbyETiming4 TypeAudioDolbyETiming1,
out1TotalProcTime FixedPointValue3,
out2TotalProcTime FixedPointValue3,
out3TotalProcTime FixedPointValue3,
presetsNumber Integer32,
presetsActive TypePresetsGPIOn,
presetsSaveAs TypePresetsSaveAs,
presetsLoadToCurrent TypePresetsSaveAs,
presetsName0 DisplayString,
presetsName1 DisplayString,
presetsName2 DisplayString,
presetsName3 DisplayString,
presetsName4 DisplayString,
presetsName5 DisplayString,
presetsName6 DisplayString,
presetsName7 DisplayString,
out1FrameSyncCompensation Integer32,
boardID Integer32,
audioDelayAESOutGang OnOffValue,
audioDelaySDIOut1Gang OnOffValue,
audioDelaySDIOut2Gang OnOffValue,
audioDelaySDIOut3Gang OnOffValue,
eventReferenceNoInputSNMP TypeEventReferenceNoInputSNMP,
eventSDIInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
eventSDIInput2NoInputSNMP TypeEventReferenceNoInputSNMP,
eventFanFailureSNMP TypeEventReferenceNoInputSNMP,
eventHighTemperatureSNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoSDIInput1SNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoSDIInput2SNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoReferenceSNMP TypeEventReferenceNoInputSNMP,
eventAESInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput2NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput3NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput4NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput1asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput2asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput3asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput4asynchronousSNMP TypeEventReferenceNoInputSNMP,
conv1InputStatus TypeReferenceStatus,
conv2InputStatus TypeReferenceStatus,
crossBarAudioIntern DisplayString,
crossBarAudioOutMUX1 DisplayString,
crossBarAudioOutMUX2 DisplayString,
crossBarAudioOutMUX3 DisplayString,
crossBarAudioOutExtAES DisplayString,
sNumber DisplayString }
-- Conformance statements
conformance OBJECT-IDENTITY
STATUS current
DESCRIPTION "Conformance declaration of PVD5630-B-D"
::= { sw383 2 }
paramGroup OBJECT-GROUP
OBJECTS {
typeName,
displayName,
position,
uptime,
type,
version,
statusColor,
statusColorRGB,
statusText,
factoryReset,
lock,
locate,
eventReferenceNoInput,
eventSDIInput1NoInput,
eventSDIInput2NoInput,
eventFanFailure,
eventHighTemperature,
eventCouldnotlocktoSDIInput1,
eventCouldnotlocktoSDIInput2,
eventCouldnotlocktoReference,
eventAESInput1NoInput,
eventAESInput2NoInput,
eventAESInput3NoInput,
eventAESInput4NoInput,
eventAESInput1asynchronous,
eventAESInput2asynchronous,
eventAESInput3asynchronous,
eventAESInput4asynchronous,
channel2CoupleTo1,
channel3CoupleTo1,
referenceLock,
referenceStatus,
referenceSource,
freqPreselect,
freq,
gPIFunc,
syncMode1,
inputStatusSDI1,
inputFreezeSDI1,
syncSDIIn1,
syncMode2,
inputStatusSDI2,
inputFreezeSDI2,
syncSDIIn2,
conv1Source,
conv1ControlMode,
conv1AspectInSelect,
conv1AspectIn,
conv1FormatOut,
conv1StatusOut,
conv1Mode,
conv1OutInsertAFD,
conv1OutInsertVI,
conv1OutInsertWSS,
conv1StatusIn,
conv2Source,
conv2ControlMode,
conv2AspectInSelect,
conv2AspectIn,
conv2FormatOut,
conv2StatusOut,
conv2Mode,
conv2OutInsertAFD,
conv2OutInsertVI,
conv2OutInsertWSS,
conv2StatusIn,
conv1MetaAdvancedSettings,
conv1MetaCCSourceDefaultPriorities,
conv1MetaTCSourceDefaultPriorities,
conv1MetaAFDInStatus,
conv1MetaVIInStatus,
conv1MetaWSSInStatus,
conv1MetaCCCDPOutStatus,
conv1MetaCCCDPInStatus,
conv1MetaCCCDPInsertion,
conv1MetaCCCDPSourcePrio1,
conv1MetaCCCDPSourcePrio2,
conv1MetaCCCDPSourcePrio3,
conv1MetaCCRAWOutStatus,
conv1MetaCCRAWInStatus,
conv1MetaCCRAWInsertion,
conv1MetaCCRAWSourcePrio1,
conv1MetaCCRAWSourcePrio2,
conv1MetaCCRAWSourcePrio3,
conv1MetaCCL21OutStatus,
conv1MetaCCL21InStatus,
conv1MetaCCL21Insertion,
conv1MetaCCL21SourcePrio1,
conv1MetaCCL21SourcePrio2,
conv1MetaCCL21SourcePrio3,
conv1MetaTCLTCInStatus,
conv1MetaTCLTCInsertion,
conv1MetaTCLTCSourcePrio1,
conv1MetaTCLTCSourcePrio2,
conv1MetaTCLTCSourcePrio3,
conv1MetaTCVITCInStatus,
conv1MetaTCVITCInsertion,
conv1MetaTCVITCSourcePrio1,
conv1MetaTCVITCSourcePrio2,
conv1MetaTCVITCSourcePrio3,
conv1MetaTCDVITCInStatus,
conv1MetaTCDVITCInsertion,
conv1MetaTCDVITCSourcePrio1,
conv1MetaTCDVITCSourcePrio2,
conv1MetaTCDVITCSourcePrio3,
conv1MetaTCLTCOutStatus,
conv1MetaTCVITCOutStatus,
conv1MetaTCDVITCAOutStatus,
conv1MetaTCDVITCBOutStatus,
conv1MetaTCDVITCADestination625,
conv1MetaTCDVITCBDestination625,
conv1MetaTCDVITCADestination525,
conv1MetaTCDVITCBDestination525,
conv1MetaTCDVITCADetectedSrcLine,
conv1MetaTCDVITCBDetectedSrcLine,
conv1MetaTCVITCDetectedDVITCLine,
conv1MetaTCDVITCAutomatic,
conv1ModeAutoARto169,
conv1ModeAutoARto43,
conv1InsertAFDFullFrame169,
conv1ModeAutoFallback,
conv2MetaAdvancedSettings,
conv2MetaCCSourceDefaultPriorities,
conv2MetaTCSourceDefaultPriorities,
conv2MetaAFDInStatus,
conv2MetaVIInStatus,
conv2MetaWSSInStatus,
conv2MetaCCCDPOutStatus,
conv2MetaCCCDPInStatus,
conv2MetaCCCDPInsertion,
conv2MetaCCCDPSourcePrio1,
conv2MetaCCCDPSourcePrio2,
conv2MetaCCCDPSourcePrio3,
conv2MetaCCRAWOutStatus,
conv2MetaCCRAWInStatus,
conv2MetaCCRAWInsertion,
conv2MetaCCRAWSourcePrio1,
conv2MetaCCRAWSourcePrio2,
conv2MetaCCRAWSourcePrio3,
conv2MetaCCL21OutStatus,
conv2MetaCCL21InStatus,
conv2MetaCCL21Insertion,
conv2MetaCCL21SourcePrio1,
conv2MetaCCL21SourcePrio2,
conv2MetaCCL21SourcePrio3,
conv2MetaTCLTCInStatus,
conv2MetaTCLTCInsertion,
conv2MetaTCLTCSourcePrio1,
conv2MetaTCLTCSourcePrio2,
conv2MetaTCLTCSourcePrio3,
conv2MetaTCVITCInStatus,
conv2MetaTCVITCInsertion,
conv2MetaTCVITCSourcePrio1,
conv2MetaTCVITCSourcePrio2,
conv2MetaTCVITCSourcePrio3,
conv2MetaTCDVITCInStatus,
conv2MetaTCDVITCInsertion,
conv2MetaTCDVITCSourcePrio1,
conv2MetaTCDVITCSourcePrio2,
conv2MetaTCDVITCSourcePrio3,
conv2MetaTCLTCOutStatus,
conv2MetaTCVITCOutStatus,
conv2MetaTCDVITCAOutStatus,
conv2MetaTCDVITCBOutStatus,
conv2MetaTCDVITCADestination625,
conv2MetaTCDVITCBDestination625,
conv2MetaTCDVITCADestination525,
conv2MetaTCDVITCBDestination525,
conv2MetaTCDVITCADetectedSrcLine,
conv2MetaTCDVITCBDetectedSrcLine,
conv2MetaTCVITCDetectedDVITCLine,
conv2MetaTCDVITCAutomatic,
conv2ModeAutoARto169,
conv2ModeAutoARto43,
conv2InsertAFDFullFrame169,
conv2ModeAutoFallback,
sDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource625,
sDIIn1TCDVITCASource525,
sDIIn1TCDVITCBSource525,
sDIIn2TCDVITCASource625,
sDIIn2TCDVITCBSource625,
sDIIn2TCDVITCASource525,
sDIIn2TCDVITCBSource525,
sDIIn1CCCDPStatus,
sDIIn1CCRAWStatus,
sDIIn1CCL21Status,
sDIIn1TCLTCStatus,
sDIIn1TCVITCStatus,
sDIIn1TCDVITCStatus,
sDIIn2CCCDPStatus,
sDIIn2CCRAWStatus,
sDIIn2CCL21Status,
sDIIn2TCLTCStatus,
sDIIn2TCVITCStatus,
sDIIn2TCDVITCStatus,
out1Assign,
out1Standard,
out2Assign,
out2Standard,
out3Assign,
out3Standard,
out4Assign,
out4Standard,
out1DelayFrames,
out1DelayLines,
out1DelayPixel,
out1DelayMs,
out1ApertureEnable,
out1ApertureLevel,
out1HBlank,
out1VBlank,
out1Gain,
out1Saturation,
out1BlackLevel,
out1Hue,
out1TestPatternSelect,
out1TestPatternStd,
out1TestPatternOn,
out1CSC,
out1CSCMode,
out1IfNoInput,
out2DelayFrames,
out2DelayLines,
out2DelayPixel,
out2DelayMs,
out2ApertureEnable,
out2ApertureLevel,
out2HBlank,
out2VBlank,
out2Gain,
out2Saturation,
out2BlackLevel,
out2Hue,
out2TestPatternSelect,
out2TestPatternStd,
out2TestPatternOn,
out2CSC,
out2CSCMode,
out2IfNoInput,
out3DelayFrames,
out3DelayLines,
out3DelayPixel,
out3DelayMs,
out3ApertureEnable,
out3ApertureLevel,
out3HBlank,
out3VBlank,
out3Gain,
out3Saturation,
out3BlackLevel,
out3Hue,
out3TestPatternSelect,
out3TestPatternStd,
out3TestPatternOn,
out3CSC,
out3CSCMode,
out3IfNoInput,
inputStatusAES1,
inputStatusAES2,
inputStatusAES3,
inputStatusAES4,
sourceInternAudio1,
sourceInternAudio2,
sourceInternAudio3,
sourceInternAudio4,
sourceInternAudio5,
sourceInternAudio6,
sourceInternAudio7,
sourceInternAudio8,
sourceInternAudio9,
sourceInternAudio10,
sourceInternAudio11,
sourceInternAudio12,
sourceInternAudio13,
sourceInternAudio14,
sourceInternAudio15,
sourceInternAudio16,
sourceInternAudio17,
sourceInternAudio18,
sourceInternAudio19,
sourceInternAudio20,
sourceInternAudioDirect11,
sourceInternAudioDirect12,
sourceInternAudioDirect13,
sourceInternAudioDirect14,
sourceInternAudioDirect21,
sourceInternAudioDirect22,
sourceInternAudioDirect23,
sourceInternAudioDirect24,
sRC1,
sRC2,
sRC3,
sRC4,
sRC5,
sRC6,
sRC7,
sRC8,
audioGain1L,
audioMute1L,
audioInvert1L,
audioSilence1L,
audioOverload1L,
audioGain1R,
audioMute1R,
audioInvert1R,
audioSilence1R,
audioOverload1R,
audioMixDown1,
audioGain2L,
audioMute2L,
audioInvert2L,
audioSilence2L,
audioOverload2L,
audioGain2R,
audioMute2R,
audioInvert2R,
audioSilence2R,
audioOverload2R,
audioMixDown2,
audioGain3L,
audioMute3L,
audioInvert3L,
audioSilence3L,
audioOverload3L,
audioGain3R,
audioMute3R,
audioInvert3R,
audioSilence3R,
audioOverload3R,
audioMixDown3,
audioGain4L,
audioMute4L,
audioInvert4L,
audioSilence4L,
audioOverload4L,
audioGain4R,
audioMute4R,
audioInvert4R,
audioSilence4R,
audioOverload4R,
audioMixDown4,
audioGain5L,
audioMute5L,
audioInvert5L,
audioSilence5L,
audioOverload5L,
audioGain5R,
audioMute5R,
audioInvert5R,
audioSilence5R,
audioOverload5R,
audioMixDown5,
audioGain6L,
audioMute6L,
audioInvert6L,
audioSilence6L,
audioOverload6L,
audioGain6R,
audioMute6R,
audioInvert6R,
audioSilence6R,
audioOverload6R,
audioMixDown6,
audioGain7L,
audioMute7L,
audioInvert7L,
audioSilence7L,
audioOverload7L,
audioGain7R,
audioMute7R,
audioInvert7R,
audioSilence7R,
audioOverload7R,
audioMixDown7,
audioGain8L,
audioMute8L,
audioInvert8L,
audioSilence8L,
audioOverload8L,
audioGain8R,
audioMute8R,
audioInvert8R,
audioSilence8R,
audioOverload8R,
audioMixDown8,
audioGain9L,
audioMute9L,
audioInvert9L,
audioSilence9L,
audioOverload9L,
audioGain9R,
audioMute9R,
audioInvert9R,
audioSilence9R,
audioOverload9R,
audioMixDown9,
audioGain10L,
audioMute10L,
audioInvert10L,
audioSilence10L,
audioOverload10L,
audioGain10R,
audioMute10R,
audioInvert10R,
audioSilence10R,
audioOverload10R,
audioMixDown10,
audioGain11L,
audioMute11L,
audioInvert11L,
audioSilence11L,
audioOverload11L,
audioGain11R,
audioMute11R,
audioInvert11R,
audioSilence11R,
audioOverload11R,
audioMixDown11,
audioGain12L,
audioMute12L,
audioInvert12L,
audioSilence12L,
audioOverload12L,
audioGain12R,
audioMute12R,
audioInvert12R,
audioSilence12R,
audioOverload12R,
audioMixDown12,
audioGain13L,
audioMute13L,
audioInvert13L,
audioSilence13L,
audioOverload13L,
audioGain13R,
audioMute13R,
audioInvert13R,
audioSilence13R,
audioOverload13R,
audioMixDown13,
audioGain14L,
audioMute14L,
audioInvert14L,
audioSilence14L,
audioOverload14L,
audioGain14R,
audioMute14R,
audioInvert14R,
audioSilence14R,
audioOverload14R,
audioMixDown14,
audioGain15L,
audioMute15L,
audioInvert15L,
audioSilence15L,
audioOverload15L,
audioGain15R,
audioMute15R,
audioInvert15R,
audioSilence15R,
audioOverload15R,
audioMixDown15,
audioGain16L,
audioMute16L,
audioInvert16L,
audioSilence16L,
audioOverload16L,
audioGain16R,
audioMute16R,
audioInvert16R,
audioSilence16R,
audioOverload16R,
audioMixDown16,
audioGain17L,
audioMute17L,
audioInvert17L,
audioSilence17L,
audioOverload17L,
audioGain17R,
audioMute17R,
audioInvert17R,
audioSilence17R,
audioOverload17R,
audioMixDown17,
audioGain18L,
audioMute18L,
audioInvert18L,
audioSilence18L,
audioOverload18L,
audioGain18R,
audioMute18R,
audioInvert18R,
audioSilence18R,
audioOverload18R,
audioMixDown18,
audioGain19L,
audioMute19L,
audioInvert19L,
audioSilence19L,
audioOverload19L,
audioGain19R,
audioMute19R,
audioInvert19R,
audioSilence19R,
audioOverload19R,
audioMixDown19,
audioGain20L,
audioMute20L,
audioInvert20L,
audioSilence20L,
audioOverload20L,
audioGain20R,
audioMute20R,
audioInvert20R,
audioSilence20R,
audioOverload20R,
audioMixDown20,
bits11,
bits12,
bits13,
bits14,
bits21,
bits22,
bits23,
bits24,
bits31,
bits32,
bits33,
bits34,
sourceAudioOutAES1L,
sourceAudioOutAES1R,
sourceAudioOutAES2L,
sourceAudioOutAES2R,
sourceAudioOutAES3L,
sourceAudioOutAES3R,
sourceAudioOutAES4L,
sourceAudioOutAES4R,
sourceAudioOutMUX11L,
sourceAudioOutMUX11R,
sourceAudioOutMUX12L,
sourceAudioOutMUX12R,
sourceAudioOutMUX13L,
sourceAudioOutMUX13R,
sourceAudioOutMUX14L,
sourceAudioOutMUX14R,
sourceAudioOutMUX15L,
sourceAudioOutMUX15R,
sourceAudioOutMUX16L,
sourceAudioOutMUX16R,
sourceAudioOutMUX17L,
sourceAudioOutMUX17R,
sourceAudioOutMUX18L,
sourceAudioOutMUX18R,
sourceAudioOutMUX21L,
sourceAudioOutMUX21R,
sourceAudioOutMUX22L,
sourceAudioOutMUX22R,
sourceAudioOutMUX23L,
sourceAudioOutMUX23R,
sourceAudioOutMUX24L,
sourceAudioOutMUX24R,
sourceAudioOutMUX25L,
sourceAudioOutMUX25R,
sourceAudioOutMUX26L,
sourceAudioOutMUX26R,
sourceAudioOutMUX27L,
sourceAudioOutMUX27R,
sourceAudioOutMUX28L,
sourceAudioOutMUX28R,
sourceAudioOutMUX31L,
sourceAudioOutMUX31R,
sourceAudioOutMUX32L,
sourceAudioOutMUX32R,
sourceAudioOutMUX33L,
sourceAudioOutMUX33R,
sourceAudioOutMUX34L,
sourceAudioOutMUX34R,
sourceAudioOutMUX35L,
sourceAudioOutMUX35R,
sourceAudioOutMUX36L,
sourceAudioOutMUX36R,
sourceAudioOutMUX37L,
sourceAudioOutMUX37R,
sourceAudioOutMUX38L,
sourceAudioOutMUX38R,
out1EmbedGroup1,
out1EmbedGroup2,
out1EmbedGroup3,
out1EmbedGroup4,
out2EmbedGroup1,
out2EmbedGroup2,
out2EmbedGroup3,
out2EmbedGroup4,
out3EmbedGroup1,
out3EmbedGroup2,
out3EmbedGroup3,
out3EmbedGroup4,
out1StatusGroup1,
out1StatusGroup2,
out1StatusGroup3,
out1StatusGroup4,
out2StatusGroup1,
out2StatusGroup2,
out2StatusGroup3,
out2StatusGroup4,
out3StatusGroup1,
out3StatusGroup2,
out3StatusGroup3,
out3StatusGroup4,
out1DeleteGroup1,
out1DeleteGroup2,
out1DeleteGroup3,
out1DeleteGroup4,
out2DeleteGroup1,
out2DeleteGroup2,
out2DeleteGroup3,
out2DeleteGroup4,
out3DeleteGroup1,
out3DeleteGroup2,
out3DeleteGroup3,
out3DeleteGroup4,
temperatureMAX1617Int,
temperatureMAX1617Ext,
audioDelayAESIn1,
audioDelayAESIn2,
audioDelayAESIn3,
audioDelayAESIn4,
audioDelayAESOut1,
audioDelayAESOut2,
audioDelayAESOut3,
audioDelayAESOut4,
audioDelaySDI11,
audioDelaySDI12,
audioDelaySDI13,
audioDelaySDI14,
audioDelaySDI15,
audioDelaySDI16,
audioDelaySDI17,
audioDelaySDI18,
audioDelaySDI21,
audioDelaySDI22,
audioDelaySDI23,
audioDelaySDI24,
audioDelaySDI25,
audioDelaySDI26,
audioDelaySDI27,
audioDelaySDI28,
audioDelaySDIOut11,
audioDelaySDIOut12,
audioDelaySDIOut13,
audioDelaySDIOut14,
audioDelaySDIOut15,
audioDelaySDIOut16,
audioDelaySDIOut17,
audioDelaySDIOut18,
audioDelaySDIOut21,
audioDelaySDIOut22,
audioDelaySDIOut23,
audioDelaySDIOut24,
audioDelaySDIOut25,
audioDelaySDIOut26,
audioDelaySDIOut27,
audioDelaySDIOut28,
audioDelaySDIOut31,
audioDelaySDIOut32,
audioDelaySDIOut33,
audioDelaySDIOut34,
audioDelaySDIOut35,
audioDelaySDIOut36,
audioDelaySDIOut37,
audioDelaySDIOut38,
videoDelayTracking,
delayPulseAssign,
deembPhaseSync1,
deembPhaseSyncVerify1,
deembPhaseSync2,
deembPhaseSyncVerify2,
presetsGPIOn,
presetsGPIOff,
genLockStatus,
inputToRefDelay1H,
inputToRefDelay1V,
inputToRefDelay2H,
inputToRefDelay2V,
audioContentSDI11,
audioContentSDI12,
audioContentSDI13,
audioContentSDI14,
audioContentSDI15,
audioContentSDI16,
audioContentSDI17,
audioContentSDI18,
audioContentSDI21,
audioContentSDI22,
audioContentSDI23,
audioContentSDI24,
audioContentSDI25,
audioContentSDI26,
audioContentSDI27,
audioContentSDI28,
audioContentStatusSDI11,
audioContentStatusSDI12,
audioContentStatusSDI13,
audioContentStatusSDI14,
audioContentStatusSDI15,
audioContentStatusSDI16,
audioContentStatusSDI17,
audioContentStatusSDI18,
audioContentStatusSDI21,
audioContentStatusSDI22,
audioContentStatusSDI23,
audioContentStatusSDI24,
audioContentStatusSDI25,
audioContentStatusSDI26,
audioContentStatusSDI27,
audioContentStatusSDI28,
audioContentAES1,
audioContentAES2,
audioContentAES3,
audioContentAES4,
audioContentStatusAES1,
audioContentStatusAES2,
audioContentStatusAES3,
audioContentStatusAES4,
sDIIn1StatusAFD,
sDIIn1StatusWSS,
sDIIn1StatusVI,
sDIIn1StatusFormatReactOnChange,
sDIIn1StatusFormatReactOnLoss,
sDIIn2StatusAFD,
sDIIn2StatusWSS,
sDIIn2StatusVI,
sDIIn2StatusFormatReactOnChange,
sDIIn2StatusFormatReactOnLoss,
snapToReferenceFrameLength,
out1ClipHeadroom,
out2ClipHeadroom,
out3ClipHeadroom,
out1FixedProcTime,
out2FixedProcTime,
out3FixedProcTime,
out1DelayMode,
out2DelayMode,
out3DelayMode,
out1FreezeMode,
out2FreezeMode,
out3FreezeMode,
audioDolbyETiming1,
audioDolbyETiming2,
audioDolbyETiming3,
audioDolbyETiming4,
out1TotalProcTime,
out2TotalProcTime,
out3TotalProcTime,
presetsNumber,
presetsActive,
presetsSaveAs,
presetsLoadToCurrent,
presetsName0,
presetsName1,
presetsName2,
presetsName3,
presetsName4,
presetsName5,
presetsName6,
presetsName7,
out1FrameSyncCompensation,
boardID,
audioDelayAESOutGang,
audioDelaySDIOut1Gang,
audioDelaySDIOut2Gang,
audioDelaySDIOut3Gang,
eventReferenceNoInputSNMP,
eventSDIInput1NoInputSNMP,
eventSDIInput2NoInputSNMP,
eventFanFailureSNMP,
eventHighTemperatureSNMP,
eventCouldnotlocktoSDIInput1SNMP,
eventCouldnotlocktoSDIInput2SNMP,
eventCouldnotlocktoReferenceSNMP,
eventAESInput1NoInputSNMP,
eventAESInput2NoInputSNMP,
eventAESInput3NoInputSNMP,
eventAESInput4NoInputSNMP,
eventAESInput1asynchronousSNMP,
eventAESInput2asynchronousSNMP,
eventAESInput3asynchronousSNMP,
eventAESInput4asynchronousSNMP,
conv1InputStatus,
conv2InputStatus,
crossBarAudioIntern,
crossBarAudioOutMUX1,
crossBarAudioOutMUX2,
crossBarAudioOutMUX3,
crossBarAudioOutExtAES,
sNumber }
STATUS current
DESCRIPTION "Conformance group containing all device parameters"
::= { conformance 1 }
paramCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance specification"
MODULE -- This module
MANDATORY-GROUPS { paramGroup }
::= { conformance 2 }
END