-- Machine generated MIB file, do not edit!
--
-- MIB file for PVD5660-B-D, type code 07.CA, software label 275
-- Generated on Tuesday, 09-Aug-16 11:21:56 UTC
-- CVS $Id: PVD5660-B-D_07ca_sw275.mib,v 1.17 2016/08/09 11:21:58 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs contain
-- unpublished proprietary information written by LYNX Technik AG and
-- are protected by Federal copyright law. They may not be disclosed
-- to third parties or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--
PVD5660-B-D-07ca-sw275-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
mib-modules, products,
FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;
pvd5660-b-d-07ca-sw275 MODULE-IDENTITY
LAST-UPDATED "201608091121Z"
ORGANIZATION "LYNX Technik AG"
CONTACT-INFO "LYNX Technik AG
Brunnenweg 3
64331 Weiterstadt
http://www.lynx-technik.com
mailto:support@lynx-technik.com"
DESCRIPTION "MIB module definition for PVD5660-B-D, type code 07.CA, software label 275"
REVISION "201608091121Z"
DESCRIPTION "Generated by LYNX Asset Database"
::= { mib-modules 1994275 }
pvd5660-b-d-07ca OBJECT-IDENTITY
STATUS current
DESCRIPTION "LYNX device type PVD5660-B-D"
::= { products 1994 }
sw275 OBJECT-IDENTITY
STATUS current
DESCRIPTION "Software label 275"
::= { pvd5660-b-d-07ca 275 }
-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unknown(0),
black(1),
green(2),
yellow(3),
red(4)
}
TypeFactoryReset ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
press(0)
}
TypeReferenceLock ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
lockToRefIn(0),
lockToSDI1(1)
}
TypeReferenceStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
invalid(1),
n525(2),
n625(3),
n720p60(4),
n720p5994(5),
n720p50(6),
n720p30(7),
n720p2997(8),
n720p25(9),
n720p24(10),
n720p2398(11),
n1080i60(12),
n1080i5994(13),
n1080i50(14),
n1080p60(15),
n1080p5994(16),
n1080p50(17),
n1080p30(18),
n1080p2997(19),
n1080p25(20),
n1080p24(21),
n1080p2398(22),
n1080psF30(23),
n1080psF2997(24),
n1080psF25(25),
n1080psF24(26),
n1080psF2398(27)
}
TypeReferenceSource ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
externBoard(0),
internRack(1)
}
TypeFreqPreselect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n60Hz(0),
n5994Hz(1),
n50Hz(2),
followLastRefInput(3)
}
TypeFreq ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n60Hz(0),
n5994Hz(1),
n50Hz(2)
}
TypeGPIFunc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
freezeInput1(1),
freezeInput2(2),
freezeBothInputs(3),
switchUserPresets(4)
}
TypeInputFreezeSDI1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freezeOnTRSError(0),
transparentForTRSErrors(1),
forceFreeze(2)
}
TypeConv1AspectInSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n169(0),
n43(1),
n169X(2)
}
TypeConv1AspectIn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n43(0),
n169(1)
}
TypeConv1StatusOut ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
invalid(0),
n525(1),
n625(2),
n720p60(3),
n720p5994(4),
n720p50(5),
n720p30(6),
n720p2997(7),
n720p25(8),
n720p24(9),
n720p2398(10),
n1080i60(11),
n1080i5994(12),
n1080i50(13),
n1080p60(14),
n1080p5994(15),
n1080p50(16),
n1080p30(17),
n1080p2997(18),
n1080p25(19),
n1080p24(20),
n1080p2398(21),
n1080psF30(22),
n1080psF2997(23),
n1080psF25(24),
n1080psF24(25),
n1080psF2398(26)
}
TypeConv1Mode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
pillarbox43Letterbox169(0),
centerCut(1),
stretchToFill(2)
}
TypeConv1StatusIn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sdtv(0),
n720p(1),
n1080i(2)
}
TypeOut1Assign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
input1(0),
converter1(1),
hiQConverter(2)
}
TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
black(0),
red(1),
green(2),
blue(3),
cyan(4),
magenta(5),
yellow(6),
white(7),
n15Grey(8),
eQPath(9),
pLLPath(10),
eQPLLPath(11),
n75Colorbar(12),
colorbarOverRed(13)
}
TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sdtv(0),
n720p(1),
n1080i(2),
followLastInput(3)
}
TypeOut1CSC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
bypass(0),
convert(1),
convertOnlyChroma(2)
}
TypeOut1CSCMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
iTURBT7095ITUCCIR60(1),
iTUCCIR60ITURBT7095(2)
}
TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freezeField1(0),
freezeField2(1),
freezeFrame(2),
black(3),
testPattern(4)
}
TypeInputStatusAES1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
async(1),
ok(2)
}
TypeSourceInternAudio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
aES1(0),
aES2(1),
aES3(2),
aES4(3),
sDI11(4),
sDI12(5),
sDI13(6),
sDI14(7),
sDI15(8),
sDI16(9),
sDI17(10),
sDI18(11)
}
TypeSourceInternAudioDirect11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDI11(0),
sDI12(1),
sDI13(2),
sDI14(3),
sDI15(4),
sDI16(5),
sDI17(6),
sDI18(7)
}
TypeAudioMute1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
norm(0),
mute(1)
}
TypeAudioInvert1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
norm(0),
inv(1)
}
TypeAudioSilence1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
silence(0),
ok(1)
}
TypeAudioOverload1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
ok(0),
overload(1)
}
TypeBits11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n20Bit(0),
n24Bit(1)
}
TypeSourceAudioOutAES1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
stream1L(0),
stream1R(1),
stream2L(2),
stream2R(3),
stream3L(4),
stream3R(5),
stream4L(6),
stream4R(7),
stream5L(8),
stream5R(9),
stream6L(10),
stream6R(11),
stream7L(12),
stream7R(13),
stream8L(14),
stream8R(15),
stream9L(16),
stream9R(17),
stream10L(18),
stream10R(19),
stream11L(20),
stream11R(21),
stream12L(22),
stream12R(23),
stream13L(24),
stream13R(25),
stream14L(26),
stream14R(27),
stream15L(28),
stream15R(29),
stream16L(30),
stream16R(31),
stream17L(32),
stream17R(33),
stream18L(34),
stream18R(35),
stream19L(36),
stream19R(37),
stream20L(38),
stream20R(39),
muteTimedByRefL(40),
muteTimedByRefR(41),
stream21L(42),
stream21R(43),
stream22L(44),
stream22R(45),
stream23L(46),
stream23R(47),
stream24L(48),
stream24R(49),
muteTimedBySDI1L(50),
muteTimedBySDI1R(51)
}
TypeSourceAudioOutMUX11L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
stream1L(0),
stream1R(1),
stream2L(2),
stream2R(3),
stream3L(4),
stream3R(5),
stream4L(6),
stream4R(7),
stream5L(8),
stream5R(9),
stream6L(10),
stream6R(11),
stream7L(12),
stream7R(13),
stream8L(14),
stream8R(15),
stream9L(16),
stream9R(17),
stream10L(18),
stream10R(19),
stream11L(20),
stream11R(21),
stream12L(22),
stream12R(23),
stream13L(24),
stream13R(25),
stream14L(26),
stream14R(27),
stream15L(28),
stream15R(29),
stream16L(30),
stream16R(31),
stream17L(32),
stream17R(33),
stream18L(34),
stream18R(35),
stream19L(36),
stream19R(37),
stream20L(38),
stream20R(39),
muteTimedByRefL(40),
muteTimedByRefR(41)
}
TypeOut1StatusGroup1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
present(0),
none(1)
}
TypeOut1DeleteGroup1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
keep(0),
del(1)
}
TypeVideoDelayTracking ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
sDIOut1(1),
sDIOut2(2),
sDIOut3(3)
}
TypePresetsGPIOn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
current(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeGenLockStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unlocked(0),
locked(1)
}
TypePresetsSaveAs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
nA(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeEventReferenceNoInputSNMP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
onOnly(1),
offOnly(2),
onOff(3)
}
-- Parameter definitions
typeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LYNX product type name"
::= { paramEntry 1 }
displayName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
::= { paramEntry 2 }
position OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
::= { paramEntry 3 }
uptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Connection time of the device to this UI (in seconds)"
::= { paramEntry 4 }
type OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device type code"
::= { paramEntry 5 }
version OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device version information"
::= { paramEntry 6 }
statusColor OBJECT-TYPE
SYNTAX TypeStatusColor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
::= { paramEntry 7 }
statusColorRGB OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
::= { paramEntry 8 }
statusText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current status text (OK or error-details)"
::= { paramEntry 9 }
factoryReset OBJECT-TYPE
SYNTAX TypeFactoryReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
::= { paramEntry 10 }
lock OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock Device"
::= { paramEntry 11 }
locate OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
::= { paramEntry 12 }
eventReferenceNoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: Reference No Input"
::= { paramEntry 14 }
eventSDIInput1NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: SDI Input 1 No Input"
::= { paramEntry 15 }
eventFanFailure OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: Fan Failure"
::= { paramEntry 16 }
eventHighTemperature OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: High Temperature"
::= { paramEntry 17 }
eventCouldnotlocktoSDIInput1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: Could not lock to SDI Input 1"
::= { paramEntry 18 }
eventCouldnotlocktoReference OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: Could not lock to Reference"
::= { paramEntry 19 }
eventAESInput1NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 1 No Input"
::= { paramEntry 20 }
eventAESInput2NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 2 No Input"
::= { paramEntry 21 }
eventAESInput3NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 3 No Input"
::= { paramEntry 22 }
eventAESInput4NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 4 No Input"
::= { paramEntry 23 }
eventAESInput1asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 1 asynchronous"
::= { paramEntry 24 }
eventAESInput2asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 2 asynchronous"
::= { paramEntry 25 }
eventAESInput3asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 3 asynchronous"
::= { paramEntry 26 }
eventAESInput4asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 4 asynchronous"
::= { paramEntry 27 }
channel2CoupleTo1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI-Output Channel 2: couple all selections to channel 1"
::= { paramEntry 29 }
channel3CoupleTo1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI-Output Channel 3: couple all selections to channel 1"
::= { paramEntry 30 }
referenceLock OBJECT-TYPE
SYNTAX TypeReferenceLock
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock all outputs to one of *RefIn *SDI1In *SDI2In"
::= { paramEntry 31 }
referenceStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of Reference Input"
::= { paramEntry 32 }
referenceSource OBJECT-TYPE
SYNTAX TypeReferenceSource
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
::= { paramEntry 33 }
freqPreselect OBJECT-TYPE
SYNTAX TypeFreqPreselect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the frequency domain for the complete device (inputs, reference and outputs)"
::= { paramEntry 34 }
freq OBJECT-TYPE
SYNTAX TypeFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
::= { paramEntry 35 }
gPIFunc OBJECT-TYPE
SYNTAX TypeGPIFunc
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify influence of GPI input"
::= { paramEntry 36 }
inputStatusSDI1 OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of SDI input channel 1"
::= { paramEntry 38 }
inputFreezeSDI1 OBJECT-TYPE
SYNTAX TypeInputFreezeSDI1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
::= { paramEntry 39 }
syncSDIIn1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed).
This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.
NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path."
::= { paramEntry 40 }
conv1AspectInSelect OBJECT-TYPE
SYNTAX TypeConv1AspectInSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Aspect Ratio of Input signal - Converter 1
The auto setting will be interpreted as:
- 16:9 (HDTV)
- 4:3 (SDTV)"
::= { paramEntry 41 }
conv1AspectIn OBJECT-TYPE
SYNTAX TypeConv1AspectIn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Aspect Ratio of Input signal - Converter 1"
::= { paramEntry 42 }
conv1StatusOut OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of output - Converter 1"
::= { paramEntry 43 }
conv1Mode OBJECT-TYPE
SYNTAX TypeConv1Mode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Conversion mode of Converter 1"
::= { paramEntry 44 }
conv1StatusIn OBJECT-TYPE
SYNTAX TypeConv1StatusIn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 1"
::= { paramEntry 45 }
conv3AspectInSelect OBJECT-TYPE
SYNTAX TypeConv1AspectInSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Aspect Ratio of Input signal - Converter 3
The auto setting will be interpreted as:
- 16:9 (HDTV)
- 4:3 (SDTV)"
::= { paramEntry 46 }
conv3AspectIn OBJECT-TYPE
SYNTAX TypeConv1AspectIn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Aspect Ratio of Input signal - Converter 3"
::= { paramEntry 47 }
conv3FormatOut OBJECT-TYPE
SYNTAX TypeConv1StatusIn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Signal format of scaler output"
::= { paramEntry 48 }
conv3StatusOut OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of output - Converter 3"
::= { paramEntry 49 }
conv3Mode OBJECT-TYPE
SYNTAX TypeConv1Mode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Conversion mode of Converter 3"
::= { paramEntry 50 }
conv3StatusIn OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 3"
::= { paramEntry 51 }
conv3CropHpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start cutout (crop) from input image at this H position (pixel)"
::= { paramEntry 52 }
conv3CropVpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start cutout (crop) from input image at this V position (lines)"
::= { paramEntry 53 }
conv3CropHsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: cutout (crop) from input image this many pixels"
::= { paramEntry 54 }
conv3CropVsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: cutout (crop) from input image this many lines"
::= { paramEntry 55 }
conv3InsertHpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start insertion of source-cutout into output at this H position (pixel)"
::= { paramEntry 56 }
conv3InsertVpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start insertion of source-cutout into output at this V position (lines)"
::= { paramEntry 57 }
conv3InsertHsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: insert source-cutout into output in this many pixels"
::= { paramEntry 58 }
conv3InsertVsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: insert source-cutout into output in this many lines"
::= { paramEntry 59 }
conv3MotionAdaptive OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Motion adaptive filtering / de-interlacing"
::= { paramEntry 60 }
out1Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 1 to Input (direct) or to one of the Converters"
::= { paramEntry 61 }
out1Standard OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 1"
::= { paramEntry 62 }
out2Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 2 to Input (direct) or to one of the Converters"
::= { paramEntry 63 }
out2Standard OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 2"
::= { paramEntry 64 }
out3Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 3 to Input (direct) or to one of the Converters"
::= { paramEntry 65 }
out3Standard OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 3"
::= { paramEntry 66 }
out1DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in frames. Combine with Out1/DelayLines and Out1/DelayPixel for total delay"
::= { paramEntry 67 }
out1DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in lines. Combine with Out1/DelayFrames and Out1/DelayPixel for total delay"
::= { paramEntry 68 }
out1DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in pixel. Combine with Out1/DelayFrames and Out1/DelayLines for total delay"
::= { paramEntry 69 }
out1DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 user delay in milliseconds."
::= { paramEntry 70 }
out1ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable aperture correction"
::= { paramEntry 71 }
out1ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: aperture correction level"
::= { paramEntry 72 }
out1HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable H-Blanking"
::= { paramEntry 73 }
out1VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable V-Blanking"
::= { paramEntry 74 }
out1Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust Video Gain"
::= { paramEntry 75 }
out1Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Saturation"
::= { paramEntry 76 }
out1BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
::= { paramEntry 77 }
out1Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Hue"
::= { paramEntry 78 }
out1TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 79 }
out1TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 80 }
out1TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable preselected test pattern"
::= { paramEntry 81 }
out1CSC OBJECT-TYPE
SYNTAX TypeOut1CSC
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Color Space Conversion Operation, SDI Out 1
- bypass completely
- convert luma&chroma
- convert only chroma"
::= { paramEntry 82 }
out1CSCMode OBJECT-TYPE
SYNTAX TypeOut1CSCMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Color Space Conversion Mode of SDI Out 1"
::= { paramEntry 83 }
out1IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 84 }
out2DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in frames. Combine with Out2/DelayLines and Out2/DelayPixel for total delay"
::= { paramEntry 85 }
out2DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in lines. Combine with Out2/DelayFrames and Out2/DelayPixel for total delay"
::= { paramEntry 86 }
out2DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in pixel. Combine with Out2/DelayFrames and Out2/DelayLines for total delay"
::= { paramEntry 87 }
out2DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 user delay in milliseconds."
::= { paramEntry 88 }
out2ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable aperture correction"
::= { paramEntry 89 }
out2ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: aperture correction level"
::= { paramEntry 90 }
out2HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable H-Blanking"
::= { paramEntry 91 }
out2VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable V-Blanking"
::= { paramEntry 92 }
out2Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust Video Gain"
::= { paramEntry 93 }
out2Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Saturation"
::= { paramEntry 94 }
out2BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video black level (in IRE)"
::= { paramEntry 95 }
out2Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Hue"
::= { paramEntry 96 }
out2TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 97 }
out2TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out2/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 98 }
out2TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable preselected test pattern"
::= { paramEntry 99 }
out2CSC OBJECT-TYPE
SYNTAX TypeOut1CSC
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Color Space Conversion Operation, SDI Out 2
- bypass completely
- convert luma&chroma
- convert only chroma"
::= { paramEntry 100 }
out2CSCMode OBJECT-TYPE
SYNTAX TypeOut1CSCMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Color Space Conversion Mode of SDI Out 2"
::= { paramEntry 101 }
out2IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 102 }
out3DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 delay in frames. Combine with Out3/DelayLines and Out3/DelayPixel for total delay"
::= { paramEntry 103 }
out3DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 delay in lines. Combine with Out3/DelayFrames and Out3/DelayPixel for total delay"
::= { paramEntry 104 }
out3DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 delay in pixel. Combine with Out3/DelayFrames and Out3/DelayLines for total delay"
::= { paramEntry 105 }
out3DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 user delay in milliseconds."
::= { paramEntry 106 }
out3ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable aperture correction"
::= { paramEntry 107 }
out3ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: aperture correction level"
::= { paramEntry 108 }
out3HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable H-Blanking"
::= { paramEntry 109 }
out3VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable V-Blanking"
::= { paramEntry 110 }
out3Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust Video Gain"
::= { paramEntry 111 }
out3Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust video Saturation"
::= { paramEntry 112 }
out3BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust video black level (in IRE)"
::= { paramEntry 113 }
out3Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust video Hue"
::= { paramEntry 114 }
out3TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 115 }
out3TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out3/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 116 }
out3TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable preselected test pattern"
::= { paramEntry 117 }
out3CSC OBJECT-TYPE
SYNTAX TypeOut1CSC
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Color Space Conversion Operation, SDI Out 3
- bypass completely
- convert luma&chroma
- convert only chroma"
::= { paramEntry 118 }
out3CSCMode OBJECT-TYPE
SYNTAX TypeOut1CSCMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Color Space Conversion Mode of SDI Out 3"
::= { paramEntry 119 }
out3IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 120 }
inputStatusAES1 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 1"
::= { paramEntry 121 }
inputStatusAES2 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 2"
::= { paramEntry 122 }
inputStatusAES3 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 3"
::= { paramEntry 123 }
inputStatusAES4 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 4"
::= { paramEntry 124 }
sourceInternAudio1 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 1"
::= { paramEntry 125 }
sourceInternAudio2 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 2"
::= { paramEntry 126 }
sourceInternAudio3 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 3"
::= { paramEntry 127 }
sourceInternAudio4 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 4"
::= { paramEntry 128 }
sourceInternAudio5 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 5"
::= { paramEntry 129 }
sourceInternAudio6 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 6"
::= { paramEntry 130 }
sourceInternAudio7 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 7"
::= { paramEntry 131 }
sourceInternAudio8 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 8"
::= { paramEntry 132 }
sourceInternAudio9 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 9"
::= { paramEntry 133 }
sourceInternAudio10 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 10"
::= { paramEntry 134 }
sourceInternAudio11 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 11"
::= { paramEntry 135 }
sourceInternAudio12 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 12"
::= { paramEntry 136 }
sourceInternAudio13 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 13"
::= { paramEntry 137 }
sourceInternAudio14 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 14"
::= { paramEntry 138 }
sourceInternAudio15 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 15"
::= { paramEntry 139 }
sourceInternAudio16 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 16"
::= { paramEntry 140 }
sourceInternAudio17 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 17"
::= { paramEntry 141 }
sourceInternAudio18 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 18"
::= { paramEntry 142 }
sourceInternAudio19 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 19"
::= { paramEntry 143 }
sourceInternAudio20 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 20"
::= { paramEntry 144 }
sourceInternAudioDirect11 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 21"
::= { paramEntry 145 }
sourceInternAudioDirect12 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 22"
::= { paramEntry 146 }
sourceInternAudioDirect13 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 23"
::= { paramEntry 147 }
sourceInternAudioDirect14 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 24"
::= { paramEntry 148 }
sRC1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 1 ON/OFF"
::= { paramEntry 149 }
sRC2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 2 ON/OFF"
::= { paramEntry 150 }
sRC3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 3 ON/OFF"
::= { paramEntry 151 }
sRC4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 4 ON/OFF"
::= { paramEntry 152 }
sRC5 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 5 ON/OFF"
::= { paramEntry 153 }
sRC6 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 6 ON/OFF"
::= { paramEntry 154 }
sRC7 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 7 ON/OFF"
::= { paramEntry 155 }
sRC8 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 8 ON/OFF"
::= { paramEntry 156 }
audioGain1L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 1 L"
::= { paramEntry 157 }
audioMute1L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 1L"
::= { paramEntry 158 }
audioInvert1L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 1L"
::= { paramEntry 159 }
audioSilence1L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 1L"
::= { paramEntry 160 }
audioOverload1L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 1 L"
::= { paramEntry 161 }
audioGain1R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 1 R"
::= { paramEntry 162 }
audioMute1R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 1R"
::= { paramEntry 163 }
audioInvert1R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 1R"
::= { paramEntry 164 }
audioSilence1R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 1R"
::= { paramEntry 165 }
audioOverload1R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 1 R"
::= { paramEntry 166 }
audioGain2L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 2 L"
::= { paramEntry 167 }
audioMute2L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 2L"
::= { paramEntry 168 }
audioInvert2L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 2L"
::= { paramEntry 169 }
audioSilence2L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 2L"
::= { paramEntry 170 }
audioOverload2L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 2 L"
::= { paramEntry 171 }
audioGain2R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 2 R"
::= { paramEntry 172 }
audioMute2R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 2R"
::= { paramEntry 173 }
audioInvert2R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 2R"
::= { paramEntry 174 }
audioSilence2R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 2R"
::= { paramEntry 175 }
audioOverload2R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 2 R"
::= { paramEntry 176 }
audioGain3L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 3 L"
::= { paramEntry 177 }
audioMute3L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 3L"
::= { paramEntry 178 }
audioInvert3L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 3L"
::= { paramEntry 179 }
audioSilence3L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 3L"
::= { paramEntry 180 }
audioOverload3L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 3 L"
::= { paramEntry 181 }
audioGain3R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 3 R"
::= { paramEntry 182 }
audioMute3R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 3R"
::= { paramEntry 183 }
audioInvert3R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 3R"
::= { paramEntry 184 }
audioSilence3R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 3R"
::= { paramEntry 185 }
audioOverload3R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 3 R"
::= { paramEntry 186 }
audioGain4L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 4 L"
::= { paramEntry 187 }
audioMute4L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 4L"
::= { paramEntry 188 }
audioInvert4L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 4L"
::= { paramEntry 189 }
audioSilence4L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 4L"
::= { paramEntry 190 }
audioOverload4L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 4 L"
::= { paramEntry 191 }
audioGain4R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 4 R"
::= { paramEntry 192 }
audioMute4R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 4R"
::= { paramEntry 193 }
audioInvert4R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 4R"
::= { paramEntry 194 }
audioSilence4R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 4R"
::= { paramEntry 195 }
audioOverload4R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 4 R"
::= { paramEntry 196 }
audioGain5L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 5 L"
::= { paramEntry 197 }
audioMute5L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 5L"
::= { paramEntry 198 }
audioInvert5L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 5L"
::= { paramEntry 199 }
audioSilence5L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 5L"
::= { paramEntry 200 }
audioOverload5L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 5 L"
::= { paramEntry 201 }
audioGain5R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 5 R"
::= { paramEntry 202 }
audioMute5R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 5R"
::= { paramEntry 203 }
audioInvert5R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 5R"
::= { paramEntry 204 }
audioSilence5R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 5R"
::= { paramEntry 205 }
audioOverload5R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 5 R"
::= { paramEntry 206 }
audioGain6L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 6 L"
::= { paramEntry 207 }
audioMute6L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 6L"
::= { paramEntry 208 }
audioInvert6L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 6L"
::= { paramEntry 209 }
audioSilence6L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 6L"
::= { paramEntry 210 }
audioOverload6L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 6 L"
::= { paramEntry 211 }
audioGain6R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 6 R"
::= { paramEntry 212 }
audioMute6R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 6R"
::= { paramEntry 213 }
audioInvert6R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 6R"
::= { paramEntry 214 }
audioSilence6R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 6R"
::= { paramEntry 215 }
audioOverload6R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 6 R"
::= { paramEntry 216 }
audioGain7L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 7 L"
::= { paramEntry 217 }
audioMute7L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 7L"
::= { paramEntry 218 }
audioInvert7L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 7L"
::= { paramEntry 219 }
audioSilence7L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 7L"
::= { paramEntry 220 }
audioOverload7L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 7 L"
::= { paramEntry 221 }
audioGain7R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 7 R"
::= { paramEntry 222 }
audioMute7R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 7R"
::= { paramEntry 223 }
audioInvert7R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 7R"
::= { paramEntry 224 }
audioSilence7R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 7R"
::= { paramEntry 225 }
audioOverload7R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 7 R"
::= { paramEntry 226 }
audioGain8L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 8 L"
::= { paramEntry 227 }
audioMute8L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 8L"
::= { paramEntry 228 }
audioInvert8L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 8L"
::= { paramEntry 229 }
audioSilence8L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 8L"
::= { paramEntry 230 }
audioOverload8L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 8 L"
::= { paramEntry 231 }
audioGain8R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 8 R"
::= { paramEntry 232 }
audioMute8R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 8R"
::= { paramEntry 233 }
audioInvert8R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 8R"
::= { paramEntry 234 }
audioSilence8R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 8R"
::= { paramEntry 235 }
audioOverload8R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 8 R"
::= { paramEntry 236 }
audioGain9L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 9 L"
::= { paramEntry 237 }
audioMute9L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 9L"
::= { paramEntry 238 }
audioInvert9L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 9L"
::= { paramEntry 239 }
audioSilence9L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 9L"
::= { paramEntry 240 }
audioOverload9L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 9 L"
::= { paramEntry 241 }
audioGain9R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 9 R"
::= { paramEntry 242 }
audioMute9R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 9R"
::= { paramEntry 243 }
audioInvert9R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 9R"
::= { paramEntry 244 }
audioSilence9R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 9R"
::= { paramEntry 245 }
audioOverload9R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 9 R"
::= { paramEntry 246 }
audioGain10L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 10 L"
::= { paramEntry 247 }
audioMute10L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 10L"
::= { paramEntry 248 }
audioInvert10L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 10L"
::= { paramEntry 249 }
audioSilence10L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 10L"
::= { paramEntry 250 }
audioOverload10L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 10 L"
::= { paramEntry 251 }
audioGain10R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 10 R"
::= { paramEntry 252 }
audioMute10R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 10R"
::= { paramEntry 253 }
audioInvert10R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 10R"
::= { paramEntry 254 }
audioSilence10R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 10R"
::= { paramEntry 255 }
audioOverload10R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 10 R"
::= { paramEntry 256 }
audioGain11L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 11 L"
::= { paramEntry 257 }
audioMute11L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 11L"
::= { paramEntry 258 }
audioInvert11L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 11L"
::= { paramEntry 259 }
audioSilence11L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 11L"
::= { paramEntry 260 }
audioOverload11L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 11 L"
::= { paramEntry 261 }
audioGain11R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 11 R"
::= { paramEntry 262 }
audioMute11R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 11R"
::= { paramEntry 263 }
audioInvert11R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 11R"
::= { paramEntry 264 }
audioSilence11R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 11R"
::= { paramEntry 265 }
audioOverload11R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 11 R"
::= { paramEntry 266 }
audioGain12L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 12 L"
::= { paramEntry 267 }
audioMute12L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 12L"
::= { paramEntry 268 }
audioInvert12L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 12L"
::= { paramEntry 269 }
audioSilence12L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 12L"
::= { paramEntry 270 }
audioOverload12L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 12 L"
::= { paramEntry 271 }
audioGain12R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 12 R"
::= { paramEntry 272 }
audioMute12R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 12R"
::= { paramEntry 273 }
audioInvert12R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 12R"
::= { paramEntry 274 }
audioSilence12R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 12R"
::= { paramEntry 275 }
audioOverload12R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 12 R"
::= { paramEntry 276 }
audioGain13L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 13 L"
::= { paramEntry 277 }
audioMute13L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 13L"
::= { paramEntry 278 }
audioInvert13L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 13L"
::= { paramEntry 279 }
audioSilence13L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 13L"
::= { paramEntry 280 }
audioOverload13L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 13 L"
::= { paramEntry 281 }
audioGain13R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 13 R"
::= { paramEntry 282 }
audioMute13R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 13R"
::= { paramEntry 283 }
audioInvert13R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 13R"
::= { paramEntry 284 }
audioSilence13R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 13R"
::= { paramEntry 285 }
audioOverload13R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 13 R"
::= { paramEntry 286 }
audioGain14L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 14 L"
::= { paramEntry 287 }
audioMute14L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 14L"
::= { paramEntry 288 }
audioInvert14L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 14L"
::= { paramEntry 289 }
audioSilence14L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 14L"
::= { paramEntry 290 }
audioOverload14L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 14 L"
::= { paramEntry 291 }
audioGain14R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 14 R"
::= { paramEntry 292 }
audioMute14R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 14R"
::= { paramEntry 293 }
audioInvert14R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 14R"
::= { paramEntry 294 }
audioSilence14R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 14R"
::= { paramEntry 295 }
audioOverload14R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 14 R"
::= { paramEntry 296 }
audioGain15L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 15 L"
::= { paramEntry 297 }
audioMute15L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 15L"
::= { paramEntry 298 }
audioInvert15L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 15L"
::= { paramEntry 299 }
audioSilence15L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 15L"
::= { paramEntry 300 }
audioOverload15L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 15 L"
::= { paramEntry 301 }
audioGain15R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 15 R"
::= { paramEntry 302 }
audioMute15R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 15R"
::= { paramEntry 303 }
audioInvert15R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 15R"
::= { paramEntry 304 }
audioSilence15R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 15R"
::= { paramEntry 305 }
audioOverload15R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 15 R"
::= { paramEntry 306 }
audioGain16L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 16 L"
::= { paramEntry 307 }
audioMute16L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 16L"
::= { paramEntry 308 }
audioInvert16L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 16L"
::= { paramEntry 309 }
audioSilence16L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 16L"
::= { paramEntry 310 }
audioOverload16L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 16 L"
::= { paramEntry 311 }
audioGain16R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 16 R"
::= { paramEntry 312 }
audioMute16R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 16R"
::= { paramEntry 313 }
audioInvert16R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 16R"
::= { paramEntry 314 }
audioSilence16R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 16R"
::= { paramEntry 315 }
audioOverload16R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 16 R"
::= { paramEntry 316 }
audioGain17L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 17 L"
::= { paramEntry 317 }
audioMute17L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 17L"
::= { paramEntry 318 }
audioInvert17L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 17L"
::= { paramEntry 319 }
audioSilence17L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 17L"
::= { paramEntry 320 }
audioOverload17L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 17 L"
::= { paramEntry 321 }
audioGain17R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 17 R"
::= { paramEntry 322 }
audioMute17R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 17R"
::= { paramEntry 323 }
audioInvert17R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 17R"
::= { paramEntry 324 }
audioSilence17R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 17R"
::= { paramEntry 325 }
audioOverload17R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 17 R"
::= { paramEntry 326 }
audioGain18L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 18 L"
::= { paramEntry 327 }
audioMute18L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 18L"
::= { paramEntry 328 }
audioInvert18L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 18L"
::= { paramEntry 329 }
audioSilence18L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 18L"
::= { paramEntry 330 }
audioOverload18L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 18 L"
::= { paramEntry 331 }
audioGain18R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 18 R"
::= { paramEntry 332 }
audioMute18R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 18R"
::= { paramEntry 333 }
audioInvert18R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 18R"
::= { paramEntry 334 }
audioSilence18R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 18R"
::= { paramEntry 335 }
audioOverload18R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 18 R"
::= { paramEntry 336 }
audioGain19L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 19 L"
::= { paramEntry 337 }
audioMute19L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 19L"
::= { paramEntry 338 }
audioInvert19L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 19L"
::= { paramEntry 339 }
audioSilence19L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 19L"
::= { paramEntry 340 }
audioOverload19L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 19 L"
::= { paramEntry 341 }
audioGain19R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 19 R"
::= { paramEntry 342 }
audioMute19R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 19R"
::= { paramEntry 343 }
audioInvert19R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 19R"
::= { paramEntry 344 }
audioSilence19R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 19R"
::= { paramEntry 345 }
audioOverload19R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 19 R"
::= { paramEntry 346 }
audioGain20L OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 20 L"
::= { paramEntry 347 }
audioMute20L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 20L"
::= { paramEntry 348 }
audioInvert20L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 20L"
::= { paramEntry 349 }
audioSilence20L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 20L"
::= { paramEntry 350 }
audioOverload20L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 20 L"
::= { paramEntry 351 }
audioGain20R OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 20 R"
::= { paramEntry 352 }
audioMute20R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 20R"
::= { paramEntry 353 }
audioInvert20R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 20R"
::= { paramEntry 354 }
audioSilence20R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 20R"
::= { paramEntry 355 }
audioOverload20R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 20 R"
::= { paramEntry 356 }
bits11 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 1"
::= { paramEntry 357 }
bits12 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 2"
::= { paramEntry 358 }
bits13 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 3"
::= { paramEntry 359 }
bits14 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 4"
::= { paramEntry 360 }
bits21 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 1"
::= { paramEntry 361 }
bits22 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 2"
::= { paramEntry 362 }
bits23 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 3"
::= { paramEntry 363 }
bits24 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 4"
::= { paramEntry 364 }
bits31 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 1"
::= { paramEntry 365 }
bits32 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 2"
::= { paramEntry 366 }
bits33 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 3"
::= { paramEntry 367 }
bits34 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 4"
::= { paramEntry 368 }
sourceAudioOutAES1L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 1L"
::= { paramEntry 369 }
sourceAudioOutAES1R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 1R"
::= { paramEntry 370 }
sourceAudioOutAES2L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 2L"
::= { paramEntry 371 }
sourceAudioOutAES2R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 2R"
::= { paramEntry 372 }
sourceAudioOutAES3L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 3L"
::= { paramEntry 373 }
sourceAudioOutAES3R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 3R"
::= { paramEntry 374 }
sourceAudioOutAES4L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 4L"
::= { paramEntry 375 }
sourceAudioOutAES4R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 4R"
::= { paramEntry 376 }
sourceAudioOutMUX11L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 1 (group 1.1), L"
::= { paramEntry 377 }
sourceAudioOutMUX11R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 1 (group 1.1), R"
::= { paramEntry 378 }
sourceAudioOutMUX12L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 2 (group 1.2), L"
::= { paramEntry 379 }
sourceAudioOutMUX12R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 2 (group 1.2), R"
::= { paramEntry 380 }
sourceAudioOutMUX13L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 3 (group 2.1), L"
::= { paramEntry 381 }
sourceAudioOutMUX13R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 3 (group 2.1), R"
::= { paramEntry 382 }
sourceAudioOutMUX14L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 4 (group 2.2), L"
::= { paramEntry 383 }
sourceAudioOutMUX14R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 4 (group 2.2), R"
::= { paramEntry 384 }
sourceAudioOutMUX15L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 5 (group 3.1), L"
::= { paramEntry 385 }
sourceAudioOutMUX15R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 5 (group 3.1), R"
::= { paramEntry 386 }
sourceAudioOutMUX16L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 6 (group 3.2), L"
::= { paramEntry 387 }
sourceAudioOutMUX16R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 6 (group 3.2), R"
::= { paramEntry 388 }
sourceAudioOutMUX17L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 7 (group 4.1), L"
::= { paramEntry 389 }
sourceAudioOutMUX17R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 7 (group 4.1), R"
::= { paramEntry 390 }
sourceAudioOutMUX18L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 8 (group 4.2), L"
::= { paramEntry 391 }
sourceAudioOutMUX18R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 8 (group 4.2), R"
::= { paramEntry 392 }
sourceAudioOutMUX21L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 1 (group 1.1), L"
::= { paramEntry 393 }
sourceAudioOutMUX21R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 1 (group 1.1), R"
::= { paramEntry 394 }
sourceAudioOutMUX22L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 2 (group 1.2), L"
::= { paramEntry 395 }
sourceAudioOutMUX22R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 2 (group 1.2), R"
::= { paramEntry 396 }
sourceAudioOutMUX23L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 3 (group 2.1), L"
::= { paramEntry 397 }
sourceAudioOutMUX23R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 3 (group 2.1), R"
::= { paramEntry 398 }
sourceAudioOutMUX24L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 4 (group 2.2), L"
::= { paramEntry 399 }
sourceAudioOutMUX24R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 4 (group 2.2), R"
::= { paramEntry 400 }
sourceAudioOutMUX25L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 5 (group 3.1), L"
::= { paramEntry 401 }
sourceAudioOutMUX25R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 5 (group 3.1), R"
::= { paramEntry 402 }
sourceAudioOutMUX26L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 6 (group 3.2), L"
::= { paramEntry 403 }
sourceAudioOutMUX26R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 6 (group 3.2), R"
::= { paramEntry 404 }
sourceAudioOutMUX27L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 7 (group 4.1), L"
::= { paramEntry 405 }
sourceAudioOutMUX27R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 7 (group 4.1), R"
::= { paramEntry 406 }
sourceAudioOutMUX28L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 8 (group 4.2), L"
::= { paramEntry 407 }
sourceAudioOutMUX28R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 8 (group 4.2), R"
::= { paramEntry 408 }
sourceAudioOutMUX31L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 1 (group 1.1), L"
::= { paramEntry 409 }
sourceAudioOutMUX31R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 1 (group 1.1), R"
::= { paramEntry 410 }
sourceAudioOutMUX32L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 2 (group 1.2), L"
::= { paramEntry 411 }
sourceAudioOutMUX32R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 2 (group 1.2), R"
::= { paramEntry 412 }
sourceAudioOutMUX33L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 3 (group 2.1), L"
::= { paramEntry 413 }
sourceAudioOutMUX33R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 3 (group 2.1), R"
::= { paramEntry 414 }
sourceAudioOutMUX34L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 4 (group 2.2), L"
::= { paramEntry 415 }
sourceAudioOutMUX34R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 4 (group 2.2), R"
::= { paramEntry 416 }
sourceAudioOutMUX35L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 5 (group 3.1), L"
::= { paramEntry 417 }
sourceAudioOutMUX35R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 5 (group 3.1), R"
::= { paramEntry 418 }
sourceAudioOutMUX36L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 6 (group 3.2), L"
::= { paramEntry 419 }
sourceAudioOutMUX36R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 6 (group 3.2), R"
::= { paramEntry 420 }
sourceAudioOutMUX37L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 7 (group 4.1), L"
::= { paramEntry 421 }
sourceAudioOutMUX37R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 7 (group 4.1), R"
::= { paramEntry 422 }
sourceAudioOutMUX38L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 8 (group 4.2), L"
::= { paramEntry 423 }
sourceAudioOutMUX38R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 8 (group 4.2), R"
::= { paramEntry 424 }
out1EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 1"
::= { paramEntry 425 }
out1EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 1"
::= { paramEntry 426 }
out1EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 1"
::= { paramEntry 427 }
out1EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 1"
::= { paramEntry 428 }
out2EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 2"
::= { paramEntry 429 }
out2EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 2"
::= { paramEntry 430 }
out2EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 2"
::= { paramEntry 431 }
out2EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 2"
::= { paramEntry 432 }
out3EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 3"
::= { paramEntry 433 }
out3EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 3"
::= { paramEntry 434 }
out3EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 3"
::= { paramEntry 435 }
out3EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 3"
::= { paramEntry 436 }
out1StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 1"
::= { paramEntry 437 }
out1StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 1"
::= { paramEntry 438 }
out1StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 1"
::= { paramEntry 439 }
out1StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 1"
::= { paramEntry 440 }
out2StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 2"
::= { paramEntry 441 }
out2StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 2"
::= { paramEntry 442 }
out2StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 2"
::= { paramEntry 443 }
out2StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 2"
::= { paramEntry 444 }
out3StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 3"
::= { paramEntry 445 }
out3StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 3"
::= { paramEntry 446 }
out3StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 3"
::= { paramEntry 447 }
out3StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 3"
::= { paramEntry 448 }
out1DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 449 }
out1DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 450 }
out1DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 451 }
out1DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 452 }
out2DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 453 }
out2DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 454 }
out2DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 455 }
out2DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 456 }
out3DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 457 }
out3DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 458 }
out3DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 459 }
out3DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 460 }
temperatureMAX1617Int OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PCB temperature (MAX1617) in C"
::= { paramEntry 463 }
temperatureMAX1617Ext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FPGA temperature in C"
::= { paramEntry 464 }
audioDelayAESIn1 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 1"
::= { paramEntry 465 }
audioDelayAESIn2 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 2"
::= { paramEntry 466 }
audioDelayAESIn3 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 3"
::= { paramEntry 467 }
audioDelayAESIn4 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 4"
::= { paramEntry 468 }
audioDelayAESOut1 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 1"
::= { paramEntry 469 }
audioDelayAESOut2 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 2"
::= { paramEntry 470 }
audioDelayAESOut3 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 3"
::= { paramEntry 471 }
audioDelayAESOut4 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 4"
::= { paramEntry 472 }
audioDelaySDI11 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 11"
::= { paramEntry 473 }
audioDelaySDI12 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 12"
::= { paramEntry 474 }
audioDelaySDI13 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 13"
::= { paramEntry 475 }
audioDelaySDI14 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 14"
::= { paramEntry 476 }
audioDelaySDI15 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 15"
::= { paramEntry 477 }
audioDelaySDI16 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 16"
::= { paramEntry 478 }
audioDelaySDI17 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 17"
::= { paramEntry 479 }
audioDelaySDI18 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 18"
::= { paramEntry 480 }
audioDelaySDIOut11 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 11"
::= { paramEntry 481 }
audioDelaySDIOut12 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 12"
::= { paramEntry 482 }
audioDelaySDIOut13 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 13"
::= { paramEntry 483 }
audioDelaySDIOut14 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 14"
::= { paramEntry 484 }
audioDelaySDIOut15 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 15"
::= { paramEntry 485 }
audioDelaySDIOut16 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 16"
::= { paramEntry 486 }
audioDelaySDIOut17 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 17"
::= { paramEntry 487 }
audioDelaySDIOut18 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 18"
::= { paramEntry 488 }
audioDelaySDIOut21 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 21"
::= { paramEntry 489 }
audioDelaySDIOut22 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 22"
::= { paramEntry 490 }
audioDelaySDIOut23 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 23"
::= { paramEntry 491 }
audioDelaySDIOut24 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 24"
::= { paramEntry 492 }
audioDelaySDIOut25 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 25"
::= { paramEntry 493 }
audioDelaySDIOut26 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 26"
::= { paramEntry 494 }
audioDelaySDIOut27 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 27"
::= { paramEntry 495 }
audioDelaySDIOut28 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 28"
::= { paramEntry 496 }
audioDelaySDIOut31 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 31"
::= { paramEntry 497 }
audioDelaySDIOut32 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 32"
::= { paramEntry 498 }
audioDelaySDIOut33 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 33"
::= { paramEntry 499 }
audioDelaySDIOut34 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 34"
::= { paramEntry 500 }
audioDelaySDIOut35 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 35"
::= { paramEntry 501 }
audioDelaySDIOut36 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 36"
::= { paramEntry 502 }
audioDelaySDIOut37 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 37"
::= { paramEntry 503 }
audioDelaySDIOut38 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 38"
::= { paramEntry 504 }
videoDelayTracking OBJECT-TYPE
SYNTAX TypeVideoDelayTracking
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alignment of the audiodelay to the SDI-Out(1-3) Videosignal"
::= { paramEntry 505 }
deembPhaseSync1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
All running channels are reset if one channel is added/removed.
(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)
If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
::= { paramEntry 506 }
presetsGPIOn OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 507 }
presetsGPIOff OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 508 }
genLockStatus OBJECT-TYPE
SYNTAX TypeGenLockStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lock-Status of LMH1982"
::= { paramEntry 509 }
inputToRefDelay1H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Horizontal delay between Input 1 and Reference"
::= { paramEntry 510 }
inputToRefDelay1V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Vertical delay between Input 1 and Reference"
::= { paramEntry 511 }
inputToRefDelay2H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "InputToRefDelay2H"
::= { paramEntry 512 }
inputToRefDelay2V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "InputToRefDelay2V"
::= { paramEntry 513 }
presetsNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "maximum number of user presets"
::= { paramEntry 514 }
presetsActive OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select the Active Preset.
NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka Current) and make the required modifications there."
::= { paramEntry 515 }
presetsSaveAs OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
::= { paramEntry 516 }
presetsLoadToCurrent OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "loads selected user preset into the current user settings, all actual user changes will be lost"
::= { paramEntry 517 }
presetsName0 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 0"
::= { paramEntry 518 }
presetsName1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 1"
::= { paramEntry 519 }
presetsName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 2"
::= { paramEntry 520 }
presetsName3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 3"
::= { paramEntry 521 }
presetsName4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 4"
::= { paramEntry 522 }
presetsName5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 5"
::= { paramEntry 523 }
presetsName6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 6"
::= { paramEntry 524 }
presetsName7 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 7"
::= { paramEntry 525 }
out1FrameSyncCompensation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Frame Sync Compensation"
::= { paramEntry 527 }
boardID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "BoardID"
::= { paramEntry 528 }
audioDelayAESOutGang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all AES Out Delay values (modify all delay controls synchronously)"
::= { paramEntry 529 }
audioDelaySDIOut1Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 1 Delay values (modify all delay controls synchronously)"
::= { paramEntry 530 }
audioDelaySDIOut2Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 2 Delay values (modify all delay controls synchronously)"
::= { paramEntry 531 }
audioDelaySDIOut3Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 3 Delay values (modify all delay controls synchronously)"
::= { paramEntry 532 }
eventReferenceNoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Reference No Input"
::= { paramEntry 533 }
eventSDIInput1NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: SDI Input 1 No Input"
::= { paramEntry 534 }
eventFanFailureSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Fan Failure"
::= { paramEntry 535 }
eventHighTemperatureSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: High Temperature"
::= { paramEntry 536 }
eventCouldnotlocktoSDIInput1SNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to SDI Input 1"
::= { paramEntry 537 }
eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to Reference"
::= { paramEntry 538 }
eventAESInput1NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 1 No Input"
::= { paramEntry 539 }
eventAESInput2NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 2 No Input"
::= { paramEntry 540 }
eventAESInput3NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 3 No Input"
::= { paramEntry 541 }
eventAESInput4NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 4 No Input"
::= { paramEntry 542 }
eventAESInput1asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 1 asynchronous"
::= { paramEntry 543 }
eventAESInput2asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 2 asynchronous"
::= { paramEntry 544 }
eventAESInput3asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 3 asynchronous"
::= { paramEntry 545 }
eventAESInput4asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 4 asynchronous"
::= { paramEntry 546 }
conv1InputStatus OBJECT-TYPE
SYNTAX TypeConv1StatusIn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 1"
::= { paramEntry 547 }
conv3InputStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 3"
::= { paramEntry 548 }
crossBarAudioIntern OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Mono Crossbar for Internal Audio AES Streams"
::= { paramEntry 549 }
crossBarAudioOutMUX1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 1"
::= { paramEntry 550 }
crossBarAudioOutMUX2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 2"
::= { paramEntry 551 }
crossBarAudioOutMUX3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 3"
::= { paramEntry 552 }
crossBarAudioOutExtAES OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for External Audio Out AES"
::= { paramEntry 553 }
conv3InSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Conv 3 Input Image Size (pixels)"
::= { paramEntry 554 }
conv3OutSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Conv 3 Output Image Size (pixels)"
::= { paramEntry 555 }
sNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial Number"
::= { paramEntry 556 }
-- Parameter table
paramTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PVD5660-B-D parameters"
::= { sw275 1 }
paramEntry OBJECT-TYPE
SYNTAX ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row in the table of PVD5660-B-D parameters"
INDEX { IMPLIED position }
::= { paramTable 1 }
ParamEntry ::= SEQUENCE {
typeName DisplayString,
displayName DisplayString,
position OCTET STRING,
uptime TimeTicks,
type DisplayString,
version DisplayString,
statusColor TypeStatusColor,
statusColorRGB DisplayString,
statusText DisplayString,
factoryReset TypeFactoryReset,
lock OnOffValue,
locate OnOffValue,
eventReferenceNoInput OnOffValue,
eventSDIInput1NoInput OnOffValue,
eventFanFailure OnOffValue,
eventHighTemperature OnOffValue,
eventCouldnotlocktoSDIInput1 OnOffValue,
eventCouldnotlocktoReference OnOffValue,
eventAESInput1NoInput OnOffValue,
eventAESInput2NoInput OnOffValue,
eventAESInput3NoInput OnOffValue,
eventAESInput4NoInput OnOffValue,
eventAESInput1asynchronous OnOffValue,
eventAESInput2asynchronous OnOffValue,
eventAESInput3asynchronous OnOffValue,
eventAESInput4asynchronous OnOffValue,
channel2CoupleTo1 OnOffValue,
channel3CoupleTo1 OnOffValue,
referenceLock TypeReferenceLock,
referenceStatus TypeReferenceStatus,
referenceSource TypeReferenceSource,
freqPreselect TypeFreqPreselect,
freq TypeFreq,
gPIFunc TypeGPIFunc,
inputStatusSDI1 TypeReferenceStatus,
inputFreezeSDI1 TypeInputFreezeSDI1,
syncSDIIn1 OnOffValue,
conv1AspectInSelect TypeConv1AspectInSelect,
conv1AspectIn TypeConv1AspectIn,
conv1StatusOut TypeConv1StatusOut,
conv1Mode TypeConv1Mode,
conv1StatusIn TypeConv1StatusIn,
conv3AspectInSelect TypeConv1AspectInSelect,
conv3AspectIn TypeConv1AspectIn,
conv3FormatOut TypeConv1StatusIn,
conv3StatusOut TypeConv1StatusOut,
conv3Mode TypeConv1Mode,
conv3StatusIn TypeConv1StatusOut,
conv3CropHpos Integer32,
conv3CropVpos Integer32,
conv3CropHsize Integer32,
conv3CropVsize Integer32,
conv3InsertHpos Integer32,
conv3InsertVpos Integer32,
conv3InsertHsize Integer32,
conv3InsertVsize Integer32,
conv3MotionAdaptive OnOffValue,
out1Assign TypeOut1Assign,
out1Standard TypeConv1StatusOut,
out2Assign TypeOut1Assign,
out2Standard TypeConv1StatusOut,
out3Assign TypeOut1Assign,
out3Standard TypeConv1StatusOut,
out1DelayFrames Integer32,
out1DelayLines Integer32,
out1DelayPixel Integer32,
out1DelayMs FixedPointValue3,
out1ApertureEnable OnOffValue,
out1ApertureLevel Integer32,
out1HBlank OnOffValue,
out1VBlank OnOffValue,
out1Gain Integer32,
out1Saturation Integer32,
out1BlackLevel FixedPointValue1,
out1Hue FixedPointValue1,
out1TestPatternSelect TypeOut1TestPatternSelect,
out1TestPatternStd TypeOut1TestPatternStd,
out1TestPatternOn OnOffValue,
out1CSC TypeOut1CSC,
out1CSCMode TypeOut1CSCMode,
out1IfNoInput TypeOut1IfNoInput,
out2DelayFrames Integer32,
out2DelayLines Integer32,
out2DelayPixel Integer32,
out2DelayMs FixedPointValue3,
out2ApertureEnable OnOffValue,
out2ApertureLevel Integer32,
out2HBlank OnOffValue,
out2VBlank OnOffValue,
out2Gain Integer32,
out2Saturation Integer32,
out2BlackLevel FixedPointValue1,
out2Hue FixedPointValue1,
out2TestPatternSelect TypeOut1TestPatternSelect,
out2TestPatternStd TypeOut1TestPatternStd,
out2TestPatternOn OnOffValue,
out2CSC TypeOut1CSC,
out2CSCMode TypeOut1CSCMode,
out2IfNoInput TypeOut1IfNoInput,
out3DelayFrames Integer32,
out3DelayLines Integer32,
out3DelayPixel Integer32,
out3DelayMs FixedPointValue3,
out3ApertureEnable OnOffValue,
out3ApertureLevel Integer32,
out3HBlank OnOffValue,
out3VBlank OnOffValue,
out3Gain Integer32,
out3Saturation Integer32,
out3BlackLevel FixedPointValue1,
out3Hue FixedPointValue1,
out3TestPatternSelect TypeOut1TestPatternSelect,
out3TestPatternStd TypeOut1TestPatternStd,
out3TestPatternOn OnOffValue,
out3CSC TypeOut1CSC,
out3CSCMode TypeOut1CSCMode,
out3IfNoInput TypeOut1IfNoInput,
inputStatusAES1 TypeInputStatusAES1,
inputStatusAES2 TypeInputStatusAES1,
inputStatusAES3 TypeInputStatusAES1,
inputStatusAES4 TypeInputStatusAES1,
sourceInternAudio1 TypeSourceInternAudio1,
sourceInternAudio2 TypeSourceInternAudio1,
sourceInternAudio3 TypeSourceInternAudio1,
sourceInternAudio4 TypeSourceInternAudio1,
sourceInternAudio5 TypeSourceInternAudio1,
sourceInternAudio6 TypeSourceInternAudio1,
sourceInternAudio7 TypeSourceInternAudio1,
sourceInternAudio8 TypeSourceInternAudio1,
sourceInternAudio9 TypeSourceInternAudio1,
sourceInternAudio10 TypeSourceInternAudio1,
sourceInternAudio11 TypeSourceInternAudio1,
sourceInternAudio12 TypeSourceInternAudio1,
sourceInternAudio13 TypeSourceInternAudio1,
sourceInternAudio14 TypeSourceInternAudio1,
sourceInternAudio15 TypeSourceInternAudio1,
sourceInternAudio16 TypeSourceInternAudio1,
sourceInternAudio17 TypeSourceInternAudio1,
sourceInternAudio18 TypeSourceInternAudio1,
sourceInternAudio19 TypeSourceInternAudio1,
sourceInternAudio20 TypeSourceInternAudio1,
sourceInternAudioDirect11 TypeSourceInternAudioDirect11,
sourceInternAudioDirect12 TypeSourceInternAudioDirect11,
sourceInternAudioDirect13 TypeSourceInternAudioDirect11,
sourceInternAudioDirect14 TypeSourceInternAudioDirect11,
sRC1 OnOffValue,
sRC2 OnOffValue,
sRC3 OnOffValue,
sRC4 OnOffValue,
sRC5 OnOffValue,
sRC6 OnOffValue,
sRC7 OnOffValue,
sRC8 OnOffValue,
audioGain1L Integer32,
audioMute1L TypeAudioMute1L,
audioInvert1L TypeAudioInvert1L,
audioSilence1L TypeAudioSilence1L,
audioOverload1L TypeAudioOverload1L,
audioGain1R Integer32,
audioMute1R TypeAudioMute1L,
audioInvert1R TypeAudioInvert1L,
audioSilence1R TypeAudioSilence1L,
audioOverload1R TypeAudioOverload1L,
audioGain2L Integer32,
audioMute2L TypeAudioMute1L,
audioInvert2L TypeAudioInvert1L,
audioSilence2L TypeAudioSilence1L,
audioOverload2L TypeAudioOverload1L,
audioGain2R Integer32,
audioMute2R TypeAudioMute1L,
audioInvert2R TypeAudioInvert1L,
audioSilence2R TypeAudioSilence1L,
audioOverload2R TypeAudioOverload1L,
audioGain3L Integer32,
audioMute3L TypeAudioMute1L,
audioInvert3L TypeAudioInvert1L,
audioSilence3L TypeAudioSilence1L,
audioOverload3L TypeAudioOverload1L,
audioGain3R Integer32,
audioMute3R TypeAudioMute1L,
audioInvert3R TypeAudioInvert1L,
audioSilence3R TypeAudioSilence1L,
audioOverload3R TypeAudioOverload1L,
audioGain4L Integer32,
audioMute4L TypeAudioMute1L,
audioInvert4L TypeAudioInvert1L,
audioSilence4L TypeAudioSilence1L,
audioOverload4L TypeAudioOverload1L,
audioGain4R Integer32,
audioMute4R TypeAudioMute1L,
audioInvert4R TypeAudioInvert1L,
audioSilence4R TypeAudioSilence1L,
audioOverload4R TypeAudioOverload1L,
audioGain5L Integer32,
audioMute5L TypeAudioMute1L,
audioInvert5L TypeAudioInvert1L,
audioSilence5L TypeAudioSilence1L,
audioOverload5L TypeAudioOverload1L,
audioGain5R Integer32,
audioMute5R TypeAudioMute1L,
audioInvert5R TypeAudioInvert1L,
audioSilence5R TypeAudioSilence1L,
audioOverload5R TypeAudioOverload1L,
audioGain6L Integer32,
audioMute6L TypeAudioMute1L,
audioInvert6L TypeAudioInvert1L,
audioSilence6L TypeAudioSilence1L,
audioOverload6L TypeAudioOverload1L,
audioGain6R Integer32,
audioMute6R TypeAudioMute1L,
audioInvert6R TypeAudioInvert1L,
audioSilence6R TypeAudioSilence1L,
audioOverload6R TypeAudioOverload1L,
audioGain7L Integer32,
audioMute7L TypeAudioMute1L,
audioInvert7L TypeAudioInvert1L,
audioSilence7L TypeAudioSilence1L,
audioOverload7L TypeAudioOverload1L,
audioGain7R Integer32,
audioMute7R TypeAudioMute1L,
audioInvert7R TypeAudioInvert1L,
audioSilence7R TypeAudioSilence1L,
audioOverload7R TypeAudioOverload1L,
audioGain8L Integer32,
audioMute8L TypeAudioMute1L,
audioInvert8L TypeAudioInvert1L,
audioSilence8L TypeAudioSilence1L,
audioOverload8L TypeAudioOverload1L,
audioGain8R Integer32,
audioMute8R TypeAudioMute1L,
audioInvert8R TypeAudioInvert1L,
audioSilence8R TypeAudioSilence1L,
audioOverload8R TypeAudioOverload1L,
audioGain9L Integer32,
audioMute9L TypeAudioMute1L,
audioInvert9L TypeAudioInvert1L,
audioSilence9L TypeAudioSilence1L,
audioOverload9L TypeAudioOverload1L,
audioGain9R Integer32,
audioMute9R TypeAudioMute1L,
audioInvert9R TypeAudioInvert1L,
audioSilence9R TypeAudioSilence1L,
audioOverload9R TypeAudioOverload1L,
audioGain10L Integer32,
audioMute10L TypeAudioMute1L,
audioInvert10L TypeAudioInvert1L,
audioSilence10L TypeAudioSilence1L,
audioOverload10L TypeAudioOverload1L,
audioGain10R Integer32,
audioMute10R TypeAudioMute1L,
audioInvert10R TypeAudioInvert1L,
audioSilence10R TypeAudioSilence1L,
audioOverload10R TypeAudioOverload1L,
audioGain11L Integer32,
audioMute11L TypeAudioMute1L,
audioInvert11L TypeAudioInvert1L,
audioSilence11L TypeAudioSilence1L,
audioOverload11L TypeAudioOverload1L,
audioGain11R Integer32,
audioMute11R TypeAudioMute1L,
audioInvert11R TypeAudioInvert1L,
audioSilence11R TypeAudioSilence1L,
audioOverload11R TypeAudioOverload1L,
audioGain12L Integer32,
audioMute12L TypeAudioMute1L,
audioInvert12L TypeAudioInvert1L,
audioSilence12L TypeAudioSilence1L,
audioOverload12L TypeAudioOverload1L,
audioGain12R Integer32,
audioMute12R TypeAudioMute1L,
audioInvert12R TypeAudioInvert1L,
audioSilence12R TypeAudioSilence1L,
audioOverload12R TypeAudioOverload1L,
audioGain13L Integer32,
audioMute13L TypeAudioMute1L,
audioInvert13L TypeAudioInvert1L,
audioSilence13L TypeAudioSilence1L,
audioOverload13L TypeAudioOverload1L,
audioGain13R Integer32,
audioMute13R TypeAudioMute1L,
audioInvert13R TypeAudioInvert1L,
audioSilence13R TypeAudioSilence1L,
audioOverload13R TypeAudioOverload1L,
audioGain14L Integer32,
audioMute14L TypeAudioMute1L,
audioInvert14L TypeAudioInvert1L,
audioSilence14L TypeAudioSilence1L,
audioOverload14L TypeAudioOverload1L,
audioGain14R Integer32,
audioMute14R TypeAudioMute1L,
audioInvert14R TypeAudioInvert1L,
audioSilence14R TypeAudioSilence1L,
audioOverload14R TypeAudioOverload1L,
audioGain15L Integer32,
audioMute15L TypeAudioMute1L,
audioInvert15L TypeAudioInvert1L,
audioSilence15L TypeAudioSilence1L,
audioOverload15L TypeAudioOverload1L,
audioGain15R Integer32,
audioMute15R TypeAudioMute1L,
audioInvert15R TypeAudioInvert1L,
audioSilence15R TypeAudioSilence1L,
audioOverload15R TypeAudioOverload1L,
audioGain16L Integer32,
audioMute16L TypeAudioMute1L,
audioInvert16L TypeAudioInvert1L,
audioSilence16L TypeAudioSilence1L,
audioOverload16L TypeAudioOverload1L,
audioGain16R Integer32,
audioMute16R TypeAudioMute1L,
audioInvert16R TypeAudioInvert1L,
audioSilence16R TypeAudioSilence1L,
audioOverload16R TypeAudioOverload1L,
audioGain17L Integer32,
audioMute17L TypeAudioMute1L,
audioInvert17L TypeAudioInvert1L,
audioSilence17L TypeAudioSilence1L,
audioOverload17L TypeAudioOverload1L,
audioGain17R Integer32,
audioMute17R TypeAudioMute1L,
audioInvert17R TypeAudioInvert1L,
audioSilence17R TypeAudioSilence1L,
audioOverload17R TypeAudioOverload1L,
audioGain18L Integer32,
audioMute18L TypeAudioMute1L,
audioInvert18L TypeAudioInvert1L,
audioSilence18L TypeAudioSilence1L,
audioOverload18L TypeAudioOverload1L,
audioGain18R Integer32,
audioMute18R TypeAudioMute1L,
audioInvert18R TypeAudioInvert1L,
audioSilence18R TypeAudioSilence1L,
audioOverload18R TypeAudioOverload1L,
audioGain19L Integer32,
audioMute19L TypeAudioMute1L,
audioInvert19L TypeAudioInvert1L,
audioSilence19L TypeAudioSilence1L,
audioOverload19L TypeAudioOverload1L,
audioGain19R Integer32,
audioMute19R TypeAudioMute1L,
audioInvert19R TypeAudioInvert1L,
audioSilence19R TypeAudioSilence1L,
audioOverload19R TypeAudioOverload1L,
audioGain20L Integer32,
audioMute20L TypeAudioMute1L,
audioInvert20L TypeAudioInvert1L,
audioSilence20L TypeAudioSilence1L,
audioOverload20L TypeAudioOverload1L,
audioGain20R Integer32,
audioMute20R TypeAudioMute1L,
audioInvert20R TypeAudioInvert1L,
audioSilence20R TypeAudioSilence1L,
audioOverload20R TypeAudioOverload1L,
bits11 TypeBits11,
bits12 TypeBits11,
bits13 TypeBits11,
bits14 TypeBits11,
bits21 TypeBits11,
bits22 TypeBits11,
bits23 TypeBits11,
bits24 TypeBits11,
bits31 TypeBits11,
bits32 TypeBits11,
bits33 TypeBits11,
bits34 TypeBits11,
sourceAudioOutAES1L TypeSourceAudioOutAES1L,
sourceAudioOutAES1R TypeSourceAudioOutAES1L,
sourceAudioOutAES2L TypeSourceAudioOutAES1L,
sourceAudioOutAES2R TypeSourceAudioOutAES1L,
sourceAudioOutAES3L TypeSourceAudioOutAES1L,
sourceAudioOutAES3R TypeSourceAudioOutAES1L,
sourceAudioOutAES4L TypeSourceAudioOutAES1L,
sourceAudioOutAES4R TypeSourceAudioOutAES1L,
sourceAudioOutMUX11L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX11R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX12L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX12R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX13L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX13R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX14L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX14R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX15L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX15R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX16L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX16R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX17L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX17R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX18L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX18R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX21L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX21R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX22L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX22R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX23L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX23R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX24L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX24R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX25L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX25R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX26L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX26R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX27L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX27R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX28L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX28R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX31L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX31R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX32L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX32R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX33L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX33R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX34L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX34R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX35L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX35R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX36L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX36R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX37L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX37R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX38L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX38R TypeSourceAudioOutMUX11L,
out1EmbedGroup1 OnOffValue,
out1EmbedGroup2 OnOffValue,
out1EmbedGroup3 OnOffValue,
out1EmbedGroup4 OnOffValue,
out2EmbedGroup1 OnOffValue,
out2EmbedGroup2 OnOffValue,
out2EmbedGroup3 OnOffValue,
out2EmbedGroup4 OnOffValue,
out3EmbedGroup1 OnOffValue,
out3EmbedGroup2 OnOffValue,
out3EmbedGroup3 OnOffValue,
out3EmbedGroup4 OnOffValue,
out1StatusGroup1 TypeOut1StatusGroup1,
out1StatusGroup2 TypeOut1StatusGroup1,
out1StatusGroup3 TypeOut1StatusGroup1,
out1StatusGroup4 TypeOut1StatusGroup1,
out2StatusGroup1 TypeOut1StatusGroup1,
out2StatusGroup2 TypeOut1StatusGroup1,
out2StatusGroup3 TypeOut1StatusGroup1,
out2StatusGroup4 TypeOut1StatusGroup1,
out3StatusGroup1 TypeOut1StatusGroup1,
out3StatusGroup2 TypeOut1StatusGroup1,
out3StatusGroup3 TypeOut1StatusGroup1,
out3StatusGroup4 TypeOut1StatusGroup1,
out1DeleteGroup1 TypeOut1DeleteGroup1,
out1DeleteGroup2 TypeOut1DeleteGroup1,
out1DeleteGroup3 TypeOut1DeleteGroup1,
out1DeleteGroup4 TypeOut1DeleteGroup1,
out2DeleteGroup1 TypeOut1DeleteGroup1,
out2DeleteGroup2 TypeOut1DeleteGroup1,
out2DeleteGroup3 TypeOut1DeleteGroup1,
out2DeleteGroup4 TypeOut1DeleteGroup1,
out3DeleteGroup1 TypeOut1DeleteGroup1,
out3DeleteGroup2 TypeOut1DeleteGroup1,
out3DeleteGroup3 TypeOut1DeleteGroup1,
out3DeleteGroup4 TypeOut1DeleteGroup1,
temperatureMAX1617Int Integer32,
temperatureMAX1617Ext Integer32,
audioDelayAESIn1 FixedPointValue2,
audioDelayAESIn2 FixedPointValue2,
audioDelayAESIn3 FixedPointValue2,
audioDelayAESIn4 FixedPointValue2,
audioDelayAESOut1 FixedPointValue2,
audioDelayAESOut2 FixedPointValue2,
audioDelayAESOut3 FixedPointValue2,
audioDelayAESOut4 FixedPointValue2,
audioDelaySDI11 FixedPointValue2,
audioDelaySDI12 FixedPointValue2,
audioDelaySDI13 FixedPointValue2,
audioDelaySDI14 FixedPointValue2,
audioDelaySDI15 FixedPointValue2,
audioDelaySDI16 FixedPointValue2,
audioDelaySDI17 FixedPointValue2,
audioDelaySDI18 FixedPointValue2,
audioDelaySDIOut11 FixedPointValue2,
audioDelaySDIOut12 FixedPointValue2,
audioDelaySDIOut13 FixedPointValue2,
audioDelaySDIOut14 FixedPointValue2,
audioDelaySDIOut15 FixedPointValue2,
audioDelaySDIOut16 FixedPointValue2,
audioDelaySDIOut17 FixedPointValue2,
audioDelaySDIOut18 FixedPointValue2,
audioDelaySDIOut21 FixedPointValue2,
audioDelaySDIOut22 FixedPointValue2,
audioDelaySDIOut23 FixedPointValue2,
audioDelaySDIOut24 FixedPointValue2,
audioDelaySDIOut25 FixedPointValue2,
audioDelaySDIOut26 FixedPointValue2,
audioDelaySDIOut27 FixedPointValue2,
audioDelaySDIOut28 FixedPointValue2,
audioDelaySDIOut31 FixedPointValue2,
audioDelaySDIOut32 FixedPointValue2,
audioDelaySDIOut33 FixedPointValue2,
audioDelaySDIOut34 FixedPointValue2,
audioDelaySDIOut35 FixedPointValue2,
audioDelaySDIOut36 FixedPointValue2,
audioDelaySDIOut37 FixedPointValue2,
audioDelaySDIOut38 FixedPointValue2,
videoDelayTracking TypeVideoDelayTracking,
deembPhaseSync1 OnOffValue,
presetsGPIOn TypePresetsGPIOn,
presetsGPIOff TypePresetsGPIOn,
genLockStatus TypeGenLockStatus,
inputToRefDelay1H Integer32,
inputToRefDelay1V Integer32,
inputToRefDelay2H Integer32,
inputToRefDelay2V Integer32,
presetsNumber Integer32,
presetsActive TypePresetsGPIOn,
presetsSaveAs TypePresetsSaveAs,
presetsLoadToCurrent TypePresetsSaveAs,
presetsName0 DisplayString,
presetsName1 DisplayString,
presetsName2 DisplayString,
presetsName3 DisplayString,
presetsName4 DisplayString,
presetsName5 DisplayString,
presetsName6 DisplayString,
presetsName7 DisplayString,
out1FrameSyncCompensation Integer32,
boardID Integer32,
audioDelayAESOutGang OnOffValue,
audioDelaySDIOut1Gang OnOffValue,
audioDelaySDIOut2Gang OnOffValue,
audioDelaySDIOut3Gang OnOffValue,
eventReferenceNoInputSNMP TypeEventReferenceNoInputSNMP,
eventSDIInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
eventFanFailureSNMP TypeEventReferenceNoInputSNMP,
eventHighTemperatureSNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoSDIInput1SNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoReferenceSNMP TypeEventReferenceNoInputSNMP,
eventAESInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput2NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput3NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput4NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput1asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput2asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput3asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput4asynchronousSNMP TypeEventReferenceNoInputSNMP,
conv1InputStatus TypeConv1StatusIn,
conv3InputStatus TypeReferenceStatus,
crossBarAudioIntern DisplayString,
crossBarAudioOutMUX1 DisplayString,
crossBarAudioOutMUX2 DisplayString,
crossBarAudioOutMUX3 DisplayString,
crossBarAudioOutExtAES DisplayString,
conv3InSize DisplayString,
conv3OutSize DisplayString,
sNumber DisplayString }
-- Conformance statements
conformance OBJECT-IDENTITY
STATUS current
DESCRIPTION "Conformance declaration of PVD5660-B-D"
::= { sw275 2 }
paramGroup OBJECT-GROUP
OBJECTS {
typeName,
displayName,
position,
uptime,
type,
version,
statusColor,
statusColorRGB,
statusText,
factoryReset,
lock,
locate,
eventReferenceNoInput,
eventSDIInput1NoInput,
eventFanFailure,
eventHighTemperature,
eventCouldnotlocktoSDIInput1,
eventCouldnotlocktoReference,
eventAESInput1NoInput,
eventAESInput2NoInput,
eventAESInput3NoInput,
eventAESInput4NoInput,
eventAESInput1asynchronous,
eventAESInput2asynchronous,
eventAESInput3asynchronous,
eventAESInput4asynchronous,
channel2CoupleTo1,
channel3CoupleTo1,
referenceLock,
referenceStatus,
referenceSource,
freqPreselect,
freq,
gPIFunc,
inputStatusSDI1,
inputFreezeSDI1,
syncSDIIn1,
conv1AspectInSelect,
conv1AspectIn,
conv1StatusOut,
conv1Mode,
conv1StatusIn,
conv3AspectInSelect,
conv3AspectIn,
conv3FormatOut,
conv3StatusOut,
conv3Mode,
conv3StatusIn,
conv3CropHpos,
conv3CropVpos,
conv3CropHsize,
conv3CropVsize,
conv3InsertHpos,
conv3InsertVpos,
conv3InsertHsize,
conv3InsertVsize,
conv3MotionAdaptive,
out1Assign,
out1Standard,
out2Assign,
out2Standard,
out3Assign,
out3Standard,
out1DelayFrames,
out1DelayLines,
out1DelayPixel,
out1DelayMs,
out1ApertureEnable,
out1ApertureLevel,
out1HBlank,
out1VBlank,
out1Gain,
out1Saturation,
out1BlackLevel,
out1Hue,
out1TestPatternSelect,
out1TestPatternStd,
out1TestPatternOn,
out1CSC,
out1CSCMode,
out1IfNoInput,
out2DelayFrames,
out2DelayLines,
out2DelayPixel,
out2DelayMs,
out2ApertureEnable,
out2ApertureLevel,
out2HBlank,
out2VBlank,
out2Gain,
out2Saturation,
out2BlackLevel,
out2Hue,
out2TestPatternSelect,
out2TestPatternStd,
out2TestPatternOn,
out2CSC,
out2CSCMode,
out2IfNoInput,
out3DelayFrames,
out3DelayLines,
out3DelayPixel,
out3DelayMs,
out3ApertureEnable,
out3ApertureLevel,
out3HBlank,
out3VBlank,
out3Gain,
out3Saturation,
out3BlackLevel,
out3Hue,
out3TestPatternSelect,
out3TestPatternStd,
out3TestPatternOn,
out3CSC,
out3CSCMode,
out3IfNoInput,
inputStatusAES1,
inputStatusAES2,
inputStatusAES3,
inputStatusAES4,
sourceInternAudio1,
sourceInternAudio2,
sourceInternAudio3,
sourceInternAudio4,
sourceInternAudio5,
sourceInternAudio6,
sourceInternAudio7,
sourceInternAudio8,
sourceInternAudio9,
sourceInternAudio10,
sourceInternAudio11,
sourceInternAudio12,
sourceInternAudio13,
sourceInternAudio14,
sourceInternAudio15,
sourceInternAudio16,
sourceInternAudio17,
sourceInternAudio18,
sourceInternAudio19,
sourceInternAudio20,
sourceInternAudioDirect11,
sourceInternAudioDirect12,
sourceInternAudioDirect13,
sourceInternAudioDirect14,
sRC1,
sRC2,
sRC3,
sRC4,
sRC5,
sRC6,
sRC7,
sRC8,
audioGain1L,
audioMute1L,
audioInvert1L,
audioSilence1L,
audioOverload1L,
audioGain1R,
audioMute1R,
audioInvert1R,
audioSilence1R,
audioOverload1R,
audioGain2L,
audioMute2L,
audioInvert2L,
audioSilence2L,
audioOverload2L,
audioGain2R,
audioMute2R,
audioInvert2R,
audioSilence2R,
audioOverload2R,
audioGain3L,
audioMute3L,
audioInvert3L,
audioSilence3L,
audioOverload3L,
audioGain3R,
audioMute3R,
audioInvert3R,
audioSilence3R,
audioOverload3R,
audioGain4L,
audioMute4L,
audioInvert4L,
audioSilence4L,
audioOverload4L,
audioGain4R,
audioMute4R,
audioInvert4R,
audioSilence4R,
audioOverload4R,
audioGain5L,
audioMute5L,
audioInvert5L,
audioSilence5L,
audioOverload5L,
audioGain5R,
audioMute5R,
audioInvert5R,
audioSilence5R,
audioOverload5R,
audioGain6L,
audioMute6L,
audioInvert6L,
audioSilence6L,
audioOverload6L,
audioGain6R,
audioMute6R,
audioInvert6R,
audioSilence6R,
audioOverload6R,
audioGain7L,
audioMute7L,
audioInvert7L,
audioSilence7L,
audioOverload7L,
audioGain7R,
audioMute7R,
audioInvert7R,
audioSilence7R,
audioOverload7R,
audioGain8L,
audioMute8L,
audioInvert8L,
audioSilence8L,
audioOverload8L,
audioGain8R,
audioMute8R,
audioInvert8R,
audioSilence8R,
audioOverload8R,
audioGain9L,
audioMute9L,
audioInvert9L,
audioSilence9L,
audioOverload9L,
audioGain9R,
audioMute9R,
audioInvert9R,
audioSilence9R,
audioOverload9R,
audioGain10L,
audioMute10L,
audioInvert10L,
audioSilence10L,
audioOverload10L,
audioGain10R,
audioMute10R,
audioInvert10R,
audioSilence10R,
audioOverload10R,
audioGain11L,
audioMute11L,
audioInvert11L,
audioSilence11L,
audioOverload11L,
audioGain11R,
audioMute11R,
audioInvert11R,
audioSilence11R,
audioOverload11R,
audioGain12L,
audioMute12L,
audioInvert12L,
audioSilence12L,
audioOverload12L,
audioGain12R,
audioMute12R,
audioInvert12R,
audioSilence12R,
audioOverload12R,
audioGain13L,
audioMute13L,
audioInvert13L,
audioSilence13L,
audioOverload13L,
audioGain13R,
audioMute13R,
audioInvert13R,
audioSilence13R,
audioOverload13R,
audioGain14L,
audioMute14L,
audioInvert14L,
audioSilence14L,
audioOverload14L,
audioGain14R,
audioMute14R,
audioInvert14R,
audioSilence14R,
audioOverload14R,
audioGain15L,
audioMute15L,
audioInvert15L,
audioSilence15L,
audioOverload15L,
audioGain15R,
audioMute15R,
audioInvert15R,
audioSilence15R,
audioOverload15R,
audioGain16L,
audioMute16L,
audioInvert16L,
audioSilence16L,
audioOverload16L,
audioGain16R,
audioMute16R,
audioInvert16R,
audioSilence16R,
audioOverload16R,
audioGain17L,
audioMute17L,
audioInvert17L,
audioSilence17L,
audioOverload17L,
audioGain17R,
audioMute17R,
audioInvert17R,
audioSilence17R,
audioOverload17R,
audioGain18L,
audioMute18L,
audioInvert18L,
audioSilence18L,
audioOverload18L,
audioGain18R,
audioMute18R,
audioInvert18R,
audioSilence18R,
audioOverload18R,
audioGain19L,
audioMute19L,
audioInvert19L,
audioSilence19L,
audioOverload19L,
audioGain19R,
audioMute19R,
audioInvert19R,
audioSilence19R,
audioOverload19R,
audioGain20L,
audioMute20L,
audioInvert20L,
audioSilence20L,
audioOverload20L,
audioGain20R,
audioMute20R,
audioInvert20R,
audioSilence20R,
audioOverload20R,
bits11,
bits12,
bits13,
bits14,
bits21,
bits22,
bits23,
bits24,
bits31,
bits32,
bits33,
bits34,
sourceAudioOutAES1L,
sourceAudioOutAES1R,
sourceAudioOutAES2L,
sourceAudioOutAES2R,
sourceAudioOutAES3L,
sourceAudioOutAES3R,
sourceAudioOutAES4L,
sourceAudioOutAES4R,
sourceAudioOutMUX11L,
sourceAudioOutMUX11R,
sourceAudioOutMUX12L,
sourceAudioOutMUX12R,
sourceAudioOutMUX13L,
sourceAudioOutMUX13R,
sourceAudioOutMUX14L,
sourceAudioOutMUX14R,
sourceAudioOutMUX15L,
sourceAudioOutMUX15R,
sourceAudioOutMUX16L,
sourceAudioOutMUX16R,
sourceAudioOutMUX17L,
sourceAudioOutMUX17R,
sourceAudioOutMUX18L,
sourceAudioOutMUX18R,
sourceAudioOutMUX21L,
sourceAudioOutMUX21R,
sourceAudioOutMUX22L,
sourceAudioOutMUX22R,
sourceAudioOutMUX23L,
sourceAudioOutMUX23R,
sourceAudioOutMUX24L,
sourceAudioOutMUX24R,
sourceAudioOutMUX25L,
sourceAudioOutMUX25R,
sourceAudioOutMUX26L,
sourceAudioOutMUX26R,
sourceAudioOutMUX27L,
sourceAudioOutMUX27R,
sourceAudioOutMUX28L,
sourceAudioOutMUX28R,
sourceAudioOutMUX31L,
sourceAudioOutMUX31R,
sourceAudioOutMUX32L,
sourceAudioOutMUX32R,
sourceAudioOutMUX33L,
sourceAudioOutMUX33R,
sourceAudioOutMUX34L,
sourceAudioOutMUX34R,
sourceAudioOutMUX35L,
sourceAudioOutMUX35R,
sourceAudioOutMUX36L,
sourceAudioOutMUX36R,
sourceAudioOutMUX37L,
sourceAudioOutMUX37R,
sourceAudioOutMUX38L,
sourceAudioOutMUX38R,
out1EmbedGroup1,
out1EmbedGroup2,
out1EmbedGroup3,
out1EmbedGroup4,
out2EmbedGroup1,
out2EmbedGroup2,
out2EmbedGroup3,
out2EmbedGroup4,
out3EmbedGroup1,
out3EmbedGroup2,
out3EmbedGroup3,
out3EmbedGroup4,
out1StatusGroup1,
out1StatusGroup2,
out1StatusGroup3,
out1StatusGroup4,
out2StatusGroup1,
out2StatusGroup2,
out2StatusGroup3,
out2StatusGroup4,
out3StatusGroup1,
out3StatusGroup2,
out3StatusGroup3,
out3StatusGroup4,
out1DeleteGroup1,
out1DeleteGroup2,
out1DeleteGroup3,
out1DeleteGroup4,
out2DeleteGroup1,
out2DeleteGroup2,
out2DeleteGroup3,
out2DeleteGroup4,
out3DeleteGroup1,
out3DeleteGroup2,
out3DeleteGroup3,
out3DeleteGroup4,
temperatureMAX1617Int,
temperatureMAX1617Ext,
audioDelayAESIn1,
audioDelayAESIn2,
audioDelayAESIn3,
audioDelayAESIn4,
audioDelayAESOut1,
audioDelayAESOut2,
audioDelayAESOut3,
audioDelayAESOut4,
audioDelaySDI11,
audioDelaySDI12,
audioDelaySDI13,
audioDelaySDI14,
audioDelaySDI15,
audioDelaySDI16,
audioDelaySDI17,
audioDelaySDI18,
audioDelaySDIOut11,
audioDelaySDIOut12,
audioDelaySDIOut13,
audioDelaySDIOut14,
audioDelaySDIOut15,
audioDelaySDIOut16,
audioDelaySDIOut17,
audioDelaySDIOut18,
audioDelaySDIOut21,
audioDelaySDIOut22,
audioDelaySDIOut23,
audioDelaySDIOut24,
audioDelaySDIOut25,
audioDelaySDIOut26,
audioDelaySDIOut27,
audioDelaySDIOut28,
audioDelaySDIOut31,
audioDelaySDIOut32,
audioDelaySDIOut33,
audioDelaySDIOut34,
audioDelaySDIOut35,
audioDelaySDIOut36,
audioDelaySDIOut37,
audioDelaySDIOut38,
videoDelayTracking,
deembPhaseSync1,
presetsGPIOn,
presetsGPIOff,
genLockStatus,
inputToRefDelay1H,
inputToRefDelay1V,
inputToRefDelay2H,
inputToRefDelay2V,
presetsNumber,
presetsActive,
presetsSaveAs,
presetsLoadToCurrent,
presetsName0,
presetsName1,
presetsName2,
presetsName3,
presetsName4,
presetsName5,
presetsName6,
presetsName7,
out1FrameSyncCompensation,
boardID,
audioDelayAESOutGang,
audioDelaySDIOut1Gang,
audioDelaySDIOut2Gang,
audioDelaySDIOut3Gang,
eventReferenceNoInputSNMP,
eventSDIInput1NoInputSNMP,
eventFanFailureSNMP,
eventHighTemperatureSNMP,
eventCouldnotlocktoSDIInput1SNMP,
eventCouldnotlocktoReferenceSNMP,
eventAESInput1NoInputSNMP,
eventAESInput2NoInputSNMP,
eventAESInput3NoInputSNMP,
eventAESInput4NoInputSNMP,
eventAESInput1asynchronousSNMP,
eventAESInput2asynchronousSNMP,
eventAESInput3asynchronousSNMP,
eventAESInput4asynchronousSNMP,
conv1InputStatus,
conv3InputStatus,
crossBarAudioIntern,
crossBarAudioOutMUX1,
crossBarAudioOutMUX2,
crossBarAudioOutMUX3,
crossBarAudioOutExtAES,
conv3InSize,
conv3OutSize,
sNumber }
STATUS current
DESCRIPTION "Conformance group containing all device parameters"
::= { conformance 1 }
paramCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance specification"
MODULE -- This module
MANDATORY-GROUPS { paramGroup }
::= { conformance 2 }
END