-- Machine generated MIB file, do not edit!
--
-- MIB file for PVD5660-BO-DO-DOW, type code 07.DB, software label 402
-- Generated on Tuesday, 09-Aug-16 12:02:13 UTC
-- CVS $Id: PVD5660-BO-DO-DOW_07db_sw402.mib,v 1.18 2016/08/09 12:02:14 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs contain
-- unpublished proprietary information written by LYNX Technik AG and
-- are protected by Federal copyright law. They may not be disclosed
-- to third parties or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--
PVD5660-BO-DO-DOW-07db-sw402-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
mib-modules, products,
FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;
pvd5660-bo-do-dow-07db-sw402 MODULE-IDENTITY
LAST-UPDATED "201608091202Z"
ORGANIZATION "LYNX Technik AG"
CONTACT-INFO "LYNX Technik AG
Brunnenweg 3
64331 Weiterstadt
http://www.lynx-technik.com
mailto:support@lynx-technik.com"
DESCRIPTION "MIB module definition for PVD5660-BO-DO-DOW, type code 07.DB, software label 402"
REVISION "201608091202Z"
DESCRIPTION "Generated by LYNX Asset Database"
::= { mib-modules 2011402 }
pvd5660-bo-do-dow-07db OBJECT-IDENTITY
STATUS current
DESCRIPTION "LYNX device type PVD5660-BO-DO-DOW"
::= { products 2011 }
sw402 OBJECT-IDENTITY
STATUS current
DESCRIPTION "Software label 402"
::= { pvd5660-bo-do-dow-07db 402 }
-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unknown(0),
black(1),
green(2),
yellow(3),
red(4)
}
TypeFactoryReset ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
press(0)
}
TypeReferenceLock ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
lockToRefIn(0),
lockToSDI1(1),
lockToSDI2(2)
}
TypeReferenceStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
invalid(1),
n525(2),
n625(3),
n720p60(4),
n720p5994(5),
n720p50(6),
n720p30(7),
n720p2997(8),
n720p25(9),
n720p24(10),
n720p2398(11),
n1080i60(12),
n1080i5994(13),
n1080i50(14),
n1080p60(15),
n1080p5994(16),
n1080p50(17),
n1080p30(18),
n1080p2997(19),
n1080p25(20),
n1080p24(21),
n1080p2398(22),
n1080psF30(23),
n1080psF2997(24),
n1080psF25(25),
n1080psF24(26),
n1080psF2398(27)
}
TypeReferenceSource ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
externBoard(0),
internRack(1)
}
TypeFreqPreselect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
evenFrequencies(0),
oddFrequencies(1),
followLastRefInput(2)
}
TypeFreq ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
evenFreq(0),
oddFreq(1),
evenFreqX(2)
}
TypeGPIFunc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
switchVideoInputs(1),
freezeInput1(2),
freezeInput2(3),
freezeBothInputs(4),
switchUserPresets(5)
}
TypeSyncMode1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
frameSync(0),
lineSyncH(1),
lineSyncV(2)
}
TypeInputFreezeSDI1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freezeOnTRSError(0),
transparentForTRSErrors(1),
forceFreeze(2)
}
TypeConv1Source ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
input1(0),
input2(1)
}
TypeConv1ControlMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
manual(0),
aFDAutomated(1),
wSSAutomated(2),
vIAutomated(3)
}
TypeConv1AspectInSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n169(0),
n43(1),
n169X(2)
}
TypeConv1AspectIn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n43(0),
n169(1)
}
TypeConv1FormatOut ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n52543(0),
n525169(1),
n62543(2),
n625169(3)
}
TypeConv1StatusOut ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
invalid(0),
n525(1),
n625(2),
n720p60(3),
n720p5994(4),
n720p50(5),
n720p30(6),
n720p2997(7),
n720p25(8),
n720p24(9),
n720p2398(10),
n1080i60(11),
n1080i5994(12),
n1080i50(13),
n1080p60(14),
n1080p5994(15),
n1080p50(16),
n1080p30(17),
n1080p2997(18),
n1080p25(19),
n1080p24(20),
n1080p2398(21),
n1080psF30(22),
n1080psF2997(23),
n1080psF25(24),
n1080psF24(25),
n1080psF2398(26)
}
TypeConv1Mode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
pillarbox43Letterbox169(0),
centerCut(1),
stretchToFill(2)
}
TypeConv3FormatOut ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n52543(0),
n525169(1),
n62543(2),
n625169(3),
n525(4),
n625(5),
n720p60(6),
n720p5994(7),
n720p50(8),
n720p30(9),
n720p2997(10),
n720p25(11),
n720p24(12),
n720p2398(13),
n1080i60(14),
n1080i5994(15),
n1080i50(16),
n1080p30(17),
n1080p2997(18),
n1080p25(19),
n1080p24(20),
n1080p2398(21),
n1080psF24(22),
n1080psF2398(23)
}
TypeConv3Mode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
pillarbox43Letterbox169(0),
centerCut(1),
n149Conversion(2),
stretchToFill(3),
custom(4)
}
TypeConv1MetaAFDInStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
present(1)
}
TypeConv1MetaCCCDPOutStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
present(1)
}
TypeConv1MetaCCCDPSourcePrio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
s334CDP(0),
s334RAW(1),
line21(2)
}
TypeConv1MetaCCCDPSourcePrio2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
s334CDP(1),
s334RAW(2),
line21(3)
}
TypeConv1MetaTCLTCSourcePrio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
aTCLTC(0),
aTCVITC(1),
dVITCA(2),
dVITCB(3)
}
TypeConv1MetaTCLTCSourcePrio2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
aTCLTC(1),
aTCVITC(2),
dVITCA(3),
dVITCB(4)
}
TypeConv1MetaTCDVITCInStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
present(1),
presentX(2),
presentXX(3)
}
TypeConv1MetaTCDVITCADestination625 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n6(0),
n7(1),
n8(2),
n9(3),
n10(4),
n11(5),
n12(6),
n13(7),
n14(8),
n15(9),
n16(10),
n17(11),
n18(12),
n19(13),
n20(14),
n21(15),
n22(16)
}
TypeConv1MetaTXTEncoderMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
wST625Only(1),
s2031WST(2),
oP47SDP(3)
}
TypeConv1MetaTXTLinesSelectionMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
automatic(0),
manual(1)
}
TypeConv1MetaField1Overflow ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
no(0),
yes(1)
}
TypeConv1MetaSMPTE2020Status ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
methodA(1),
methodB(2)
}
TypeConv1ModeAutoARto169 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
boxed(0),
cut(1),
stretch(2)
}
TypeConv1InsertAFDFullFrame169 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n1000(0),
n1010(1)
}
TypeConv1ModeAutoFallback ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
useLastValidFormatDescr(0),
useManualSettings(1)
}
TypeSDIIn1TXTDecoderMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
autoSelect(0),
wST625Only(1),
s2031WST(2),
oP47SDP(3)
}
TypeSDIIn1TCDVITCASource625 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
auto(0),
n6(1),
n7(2),
n8(3),
n9(4),
n10(5),
n11(6),
n12(7),
n13(8),
n14(9),
n15(10),
n16(11),
n17(12),
n18(13),
n19(14),
n20(15),
n21(16),
n22(17)
}
TypeOut1Assign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
input1(0),
input2(1),
converter1(2),
converter2(3),
hiQConverter(4)
}
TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
black(0),
red(1),
green(2),
blue(3),
cyan(4),
magenta(5),
yellow(6),
white(7),
n15Grey(8),
eQPath(9),
pLLPath(10),
eQPLLPath(11),
n75Colorbar(12),
colorbarOverRed(13)
}
TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n525(0),
n625(1),
n720p60(2),
n720p5994(3),
n720p50(4),
n720p30(5),
n720p2997(6),
n720p25(7),
n720p24(8),
n720p2398(9),
n1080i60(10),
n1080i5994(11),
n1080i50(12),
n1080p30(13),
n1080p2997(14),
n1080p25(15),
n1080p24(16),
n1080p2398(17),
n1080psF24(18),
n1080psF2398(19),
followLastInput(20)
}
TypeOut1CSC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
bypass(0),
convert(1),
convertOnlyChroma(2)
}
TypeOut1CSCMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
iTURBT7095ITUCCIR60(1),
iTUCCIR60ITURBT7095(2)
}
TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freeze(0),
black(1),
testPattern(2)
}
TypeOut1ModifyPsF ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
pToPsf(1),
psfToP(2)
}
TypeInputStatusAES1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
async(1),
ok(2)
}
TypeSourceInternAudio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
aES1(0),
aES2(1),
aES3(2),
aES4(3),
sDI11(4),
sDI12(5),
sDI13(6),
sDI14(7),
sDI15(8),
sDI16(9),
sDI17(10),
sDI18(11),
sDI21(12),
sDI22(13),
sDI23(14),
sDI24(15),
sDI25(16),
sDI26(17),
sDI27(18),
sDI28(19)
}
TypeSourceInternAudioDirect11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDI11(0),
sDI12(1),
sDI13(2),
sDI14(3),
sDI15(4),
sDI16(5),
sDI17(6),
sDI18(7)
}
TypeSourceInternAudioDirect21 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDI21(0),
sDI22(1),
sDI23(2),
sDI24(3),
sDI25(4),
sDI26(5),
sDI27(6),
sDI28(7)
}
TypeAudioMute1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
norm(0),
mute(1)
}
TypeAudioInvert1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
norm(0),
inv(1)
}
TypeAudioSilence1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
silence(0),
ok(1)
}
TypeAudioOverload1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
ok(0),
overload(1)
}
TypeBits11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n20Bit(0),
n24Bit(1)
}
TypeSourceAudioOutAES1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
stream1L(0),
stream1R(1),
stream2L(2),
stream2R(3),
stream3L(4),
stream3R(5),
stream4L(6),
stream4R(7),
stream5L(8),
stream5R(9),
stream6L(10),
stream6R(11),
stream7L(12),
stream7R(13),
stream8L(14),
stream8R(15),
stream9L(16),
stream9R(17),
stream10L(18),
stream10R(19),
stream11L(20),
stream11R(21),
stream12L(22),
stream12R(23),
stream13L(24),
stream13R(25),
stream14L(26),
stream14R(27),
stream15L(28),
stream15R(29),
stream16L(30),
stream16R(31),
stream17L(32),
stream17R(33),
stream18L(34),
stream18R(35),
stream19L(36),
stream19R(37),
stream20L(38),
stream20R(39),
muteTimedByRefL(40),
muteTimedByRefR(41),
stream21L(42),
stream21R(43),
stream22L(44),
stream22R(45),
stream23L(46),
stream23R(47),
stream24L(48),
stream24R(49),
muteTimedBySDI1L(50),
muteTimedBySDI1R(51),
stream25L(52),
stream25R(53),
stream26L(54),
stream26R(55),
stream27L(56),
stream27R(57),
stream28L(58),
stream28R(59),
muteTimedBySDI2L(60),
muteTimedBySDI2R(61)
}
TypeSourceAudioOutMUX11L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
stream1L(0),
stream1R(1),
stream2L(2),
stream2R(3),
stream3L(4),
stream3R(5),
stream4L(6),
stream4R(7),
stream5L(8),
stream5R(9),
stream6L(10),
stream6R(11),
stream7L(12),
stream7R(13),
stream8L(14),
stream8R(15),
stream9L(16),
stream9R(17),
stream10L(18),
stream10R(19),
stream11L(20),
stream11R(21),
stream12L(22),
stream12R(23),
stream13L(24),
stream13R(25),
stream14L(26),
stream14R(27),
stream15L(28),
stream15R(29),
stream16L(30),
stream16R(31),
stream17L(32),
stream17R(33),
stream18L(34),
stream18R(35),
stream19L(36),
stream19R(37),
stream20L(38),
stream20R(39),
muteTimedByRefL(40),
muteTimedByRefR(41)
}
TypeOut1StatusGroup1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
present(0),
none(1)
}
TypeOut1DeleteGroup1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
keep(0),
del(1)
}
TypeVideoDelayTracking ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
sDIOut1(1),
sDIOut2(2),
sDIOut3(3),
sDIOut4(4)
}
TypeDelayPulseAssign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDIOut1(0),
sDIOut2(1),
sDIOut3(2),
sDIOut4(3)
}
TypeDeembPhaseSyncVerify1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
on(0),
off(1)
}
TypePresetsGPIOn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
current(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeGenLockStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unlocked(0),
locked(1)
}
TypeAudioContentSDI11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
automatic(0),
pCMAudio(1),
dolbyE(2),
nonPCMData(3)
}
TypeAudioContentStatusSDI11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
pCMAudio(1),
dolbyE(2),
nonPCMData(3)
}
TypeOut1MetaAFDLine ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
n8(1),
n9(2),
n10(3),
n11(4),
n12(5),
n13(6),
n14(7),
n15(8),
n16(9),
n17(10),
n18(11),
n19(12),
n20(13),
n21(14),
n22(15),
n23(16),
n24(17),
n25(18),
n26(19),
n27(20),
n28(21),
n29(22),
n30(23),
n31(24),
n32(25),
n33(26),
n34(27),
n35(28),
n36(29),
n37(30),
n38(31),
n39(32),
n40(33),
n41(34)
}
TypeOut1MetaATCLTCLocation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
vanc(0),
hanc(1)
}
TypeSDIIn1StatusAFD ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
n0010LetterboxTopImageInA43Frame(1),
n0011Letterbox149ImageInA43Frame(2),
n0100169LetterboxCenterImageInA43Frame(3),
n1000FullFrameImageInA43Frame(4),
n1001FullFrameImageInA43Frame(5),
n1010169LetterboxImageVerticallyCenteredInA43Frame(6),
n1011149LetterboxImageVerticallyCenteredInA43Frame(7),
n110143ImageShootProtect149InA43Frame(8),
n1110169LetterboxImageShootProtect149InA43Frame(9),
n1111169LetterboxImageShootProtect43InA43Frame(10),
n0010169FullFrameImageInA169Frame(11),
n0011149PillarboxImageInA169Frame(12),
n0100169LetterboxCenterImageInA169Frame(13),
n1000FullFrameImageInA169Frame(14),
n1001PillarboxImageInA169Frame(15),
n1010Protected169FullFrameImageInA169Frame(16),
n1011149PillarboxImageInA169Frame(17),
n110143PillarboxImageShootProtect149InA169Frame(18),
n1110169ImageShootProtect149InA169Frame(19),
n1111169ImageShootProtect43InA169Frame(20)
}
TypeSDIIn1StatusWSS ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
fullFormat43(1),
box149Center(2),
box149Top(3),
box169Center(4),
box169Top(5),
box169CenterX(6),
fullFormat169CenterAndProtected149(7),
fullFormat169Anamorphic(8)
}
TypeSDIIn1StatusVI ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
n52543(1),
n62543(2),
n525169(3),
n625169(4)
}
TypeSDIIn1AFDLine ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
n8(1),
n9(2),
n10(3),
n11(4),
n12(5),
n13(6),
n14(7),
n15(8),
n16(9),
n17(10),
n18(11),
n19(12),
n20(13),
n21(14),
n22(15),
n23(16),
n24(17),
n25(18),
n26(19),
n27(20),
n28(21),
n29(22),
n30(23),
n31(24),
n32(25),
n33(26),
n34(27),
n35(28),
n36(29),
n37(30),
n38(31),
n39(32),
n40(33),
n41(34)
}
TypeSDIIn1StatusFormatReactOnChange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
delayed(0),
quick(1)
}
TypeOut1DelayMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
framesLinesPixels(0),
milliSeconds(1)
}
TypeOut1FreezeMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freezeField1(0),
freezeField2(1),
freezeFrame(2),
testPattern(3)
}
TypeAudioDolbyETiming1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDIOut1(0),
sDIOut2(1),
sDIOut3(2),
sDIOut4(3),
aESOut(4),
none(5)
}
TypeConv3COCOMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
gainOffset(0),
peakBlack(1)
}
TypeSDIIn1SourceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
optical(0),
electrical(1)
}
TypeASCAResourceAssign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDI1SDI2(0),
sDI1Only(1),
sDI2Only(2)
}
TypePresetsSaveAs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
nA(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeEventReferenceNoInputSNMP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
onOnly(1),
offOnly(2),
onOff(3)
}
-- Parameter definitions
typeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LYNX product type name"
::= { paramEntry 1 }
displayName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
::= { paramEntry 2 }
position OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
::= { paramEntry 3 }
uptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Connection time of the device to this UI (in seconds)"
::= { paramEntry 4 }
type OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device type code"
::= { paramEntry 5 }
version OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device version information"
::= { paramEntry 6 }
statusColor OBJECT-TYPE
SYNTAX TypeStatusColor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
::= { paramEntry 7 }
statusColorRGB OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
::= { paramEntry 8 }
statusText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current status text (OK or error-details)"
::= { paramEntry 9 }
factoryReset OBJECT-TYPE
SYNTAX TypeFactoryReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
::= { paramEntry 10 }
lock OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock Device"
::= { paramEntry 11 }
locate OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
::= { paramEntry 12 }
eventReferenceNoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: Reference No Input"
::= { paramEntry 14 }
eventSDIInput1NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: SDI Input 1 No Input"
::= { paramEntry 15 }
eventSDIInput2NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: SDI Input 2 No Input"
::= { paramEntry 16 }
eventFanFailure OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: Fan Failure"
::= { paramEntry 17 }
eventHighTemperature OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: High Temperature"
::= { paramEntry 18 }
eventCouldnotlocktoSDIInput1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: Could not lock to SDI Input 1"
::= { paramEntry 19 }
eventCouldnotlocktoSDIInput2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: Could not lock to SDI Input 2"
::= { paramEntry 20 }
eventCouldnotlocktoReference OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: Could not lock to Reference"
::= { paramEntry 21 }
eventAESInput1NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 1 No Input"
::= { paramEntry 22 }
eventAESInput2NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 2 No Input"
::= { paramEntry 23 }
eventAESInput3NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 3 No Input"
::= { paramEntry 24 }
eventAESInput4NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 4 No Input"
::= { paramEntry 25 }
eventAESInput1asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 1 asynchronous"
::= { paramEntry 26 }
eventAESInput2asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 2 asynchronous"
::= { paramEntry 27 }
eventAESInput3asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 3 asynchronous"
::= { paramEntry 28 }
eventAESInput4asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 4 asynchronous"
::= { paramEntry 29 }
channel2CoupleTo1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI-Output Channel 2: couple all selections to channel 1"
::= { paramEntry 36 }
channel3CoupleTo1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI-Output Channel 3: couple all selections to channel 1"
::= { paramEntry 37 }
channel4CoupleTo1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI-Output Channel 4: couple all selections to channel 1"
::= { paramEntry 38 }
referenceLock OBJECT-TYPE
SYNTAX TypeReferenceLock
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock all outputs to one of *RefIn *SDI1In *SDI2In"
::= { paramEntry 39 }
referenceStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of Reference Input"
::= { paramEntry 40 }
referenceSource OBJECT-TYPE
SYNTAX TypeReferenceSource
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
::= { paramEntry 41 }
freqPreselect OBJECT-TYPE
SYNTAX TypeFreqPreselect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the frequency domain for the complete device (inputs, reference and outputs)"
::= { paramEntry 42 }
freq OBJECT-TYPE
SYNTAX TypeFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
::= { paramEntry 43 }
gPIFunc OBJECT-TYPE
SYNTAX TypeGPIFunc
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify influence of GPI input"
::= { paramEntry 44 }
syncMode1 OBJECT-TYPE
SYNTAX TypeSyncMode1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Synchronization Mode for SDI Channel 1"
::= { paramEntry 45 }
inputStatusSDI1 OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of SDI input channel 1"
::= { paramEntry 46 }
inputFreezeSDI1 OBJECT-TYPE
SYNTAX TypeInputFreezeSDI1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
::= { paramEntry 47 }
syncSDIIn1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed).
This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.
NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path."
::= { paramEntry 48 }
syncMode2 OBJECT-TYPE
SYNTAX TypeSyncMode1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Synchronization Mode for SDI Channel 2"
::= { paramEntry 49 }
inputStatusSDI2 OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of SDI input channel 2"
::= { paramEntry 50 }
inputFreezeSDI2 OBJECT-TYPE
SYNTAX TypeInputFreezeSDI1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
::= { paramEntry 51 }
syncSDIIn2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed).
This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.
NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path."
::= { paramEntry 52 }
conv1Source OBJECT-TYPE
SYNTAX TypeConv1Source
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Input source signal for Converter 1"
::= { paramEntry 53 }
conv1ControlMode OBJECT-TYPE
SYNTAX TypeConv1ControlMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select control mode of converter 1"
::= { paramEntry 54 }
conv1AspectInSelect OBJECT-TYPE
SYNTAX TypeConv1AspectInSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Aspect Ratio of Input signal - Converter 1
The auto setting will be interpreted as:
- 16:9 (HDTV)
- 4:3 (SDTV)"
::= { paramEntry 55 }
conv1AspectIn OBJECT-TYPE
SYNTAX TypeConv1AspectIn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Aspect Ratio of Input signal - Converter 1"
::= { paramEntry 56 }
conv1FormatOut OBJECT-TYPE
SYNTAX TypeConv1FormatOut
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Signal format of scaler output"
::= { paramEntry 57 }
conv1StatusOut OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of output - Converter 1"
::= { paramEntry 58 }
conv1Mode OBJECT-TYPE
SYNTAX TypeConv1Mode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Conversion mode of Converter 1"
::= { paramEntry 59 }
conv1OutInsertAFD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Active format description into the video data from Scaler"
::= { paramEntry 61 }
conv1OutInsertVI OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Video Index into the video data from Scaler"
::= { paramEntry 62 }
conv1OutInsertWSS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Wide Screen Signaling into the video data from Scaler"
::= { paramEntry 63 }
conv1StatusIn OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 1"
::= { paramEntry 64 }
conv2Source OBJECT-TYPE
SYNTAX TypeConv1Source
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Input source signal for Converter 2"
::= { paramEntry 65 }
conv2ControlMode OBJECT-TYPE
SYNTAX TypeConv1ControlMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select control mode of converter 2"
::= { paramEntry 66 }
conv2AspectInSelect OBJECT-TYPE
SYNTAX TypeConv1AspectInSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Aspect Ratio of Input signal - Converter 2
The auto setting will be interpreted as:
- 16:9 (HDTV)
- 4:3 (SDTV)"
::= { paramEntry 67 }
conv2AspectIn OBJECT-TYPE
SYNTAX TypeConv1AspectIn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Aspect Ratio of Input signal - Converter 2"
::= { paramEntry 68 }
conv2FormatOut OBJECT-TYPE
SYNTAX TypeConv1FormatOut
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Signal format of scaler output"
::= { paramEntry 69 }
conv2StatusOut OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of output - Converter 2"
::= { paramEntry 70 }
conv2Mode OBJECT-TYPE
SYNTAX TypeConv1Mode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Conversion mode of Converter 2"
::= { paramEntry 71 }
conv2OutInsertAFD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Active format description into the video data from HiQ Scaler"
::= { paramEntry 73 }
conv2OutInsertVI OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Video Index into the video data from HiQ Scaler"
::= { paramEntry 74 }
conv2OutInsertWSS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Wide Screen Signaling into the video data from HiQ Scaler"
::= { paramEntry 75 }
conv2StatusIn OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 2"
::= { paramEntry 76 }
conv3Source OBJECT-TYPE
SYNTAX TypeConv1Source
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Input source signal for Converter 3"
::= { paramEntry 77 }
conv3ControlMode OBJECT-TYPE
SYNTAX TypeConv1ControlMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select control mode of converter 3"
::= { paramEntry 78 }
conv3AspectInSelect OBJECT-TYPE
SYNTAX TypeConv1AspectIn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Aspect Ratio of Input signal - Converter 3
The auto setting will be interpreted as:
- 16:9 (HDTV)
- 4:3 (SDTV)"
::= { paramEntry 79 }
conv3AspectIn OBJECT-TYPE
SYNTAX TypeConv1AspectIn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Aspect Ratio of Input signal - Converter 3"
::= { paramEntry 80 }
conv3FormatOut OBJECT-TYPE
SYNTAX TypeConv3FormatOut
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Signal format of scaler output"
::= { paramEntry 81 }
conv3StatusOut OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of output - Converter 3"
::= { paramEntry 82 }
conv3Mode OBJECT-TYPE
SYNTAX TypeConv3Mode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Conversion mode of Converter 3"
::= { paramEntry 83 }
conv3AdvancedSettings OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Activate advanced settings from HiQ Scaler"
::= { paramEntry 84 }
conv3OutInsertAFD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Active format description into the video data from HiQ Scaler"
::= { paramEntry 85 }
conv3OutInsertVI OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Video Index into the video data from HiQ Scaler"
::= { paramEntry 86 }
conv3OutInsertWSS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Wide Screen Signaling into the video data from HiQ Scaler"
::= { paramEntry 87 }
conv3StatusIn OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 3"
::= { paramEntry 88 }
conv3CropHpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start cutout (crop) from input image at this H position (pixel)"
::= { paramEntry 89 }
conv3CropVpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start cutout (crop) from input image at this V position (lines)"
::= { paramEntry 90 }
conv3CropHsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: cutout (crop) from input image this many pixels"
::= { paramEntry 91 }
conv3CropVsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: cutout (crop) from input image this many lines"
::= { paramEntry 92 }
conv3InsertHpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start insertion of source-cutout into output at this H position (pixel)"
::= { paramEntry 93 }
conv3InsertVpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start insertion of source-cutout into output at this V position (lines)"
::= { paramEntry 94 }
conv3InsertHsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: insert source-cutout into output in this many pixels"
::= { paramEntry 95 }
conv3InsertVsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: insert source-cutout into output in this many lines"
::= { paramEntry 96 }
conv3MotionAdaptive OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Motion adaptive filtering / de-interlacing"
::= { paramEntry 97 }
conv3NRGeneral OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "general level of noise reduction "
::= { paramEntry 98 }
conv3NRBlockArtifact OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "level of block artifact reduction"
::= { paramEntry 99 }
conv3NRMosquito OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "level of mosquito noise reduction"
::= { paramEntry 100 }
conv3DetailLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "level for detail enhancement"
::= { paramEntry 101 }
conv3DetailThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "threshold for detail enhancement"
::= { paramEntry 102 }
conv1MetaAdvancedSettings OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Activate advanced Meta Data settings of converter 1"
::= { paramEntry 103 }
conv1MetaCCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Close Caption to default for converter 1"
::= { paramEntry 104 }
conv1MetaTCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Time Code to default for converter 1"
::= { paramEntry 105 }
conv1MetaAFDInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AFD detection on input of converter 1"
::= { paramEntry 106 }
conv1MetaVIInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VI detection on input of converter 1"
::= { paramEntry 107 }
conv1MetaWSSInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "WSS detection on input of converter 1"
::= { paramEntry 108 }
conv1MetaCCCDPOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at output of converter 1"
::= { paramEntry 109 }
conv1MetaCCCDPInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at input of converter 1"
::= { paramEntry 110 }
conv1MetaCCCDPInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 1"
::= { paramEntry 111 }
conv1MetaCCCDPSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 112 }
conv1MetaCCCDPSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 113 }
conv1MetaCCCDPSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 114 }
conv1MetaCCRAWOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at output of converter 1"
::= { paramEntry 115 }
conv1MetaCCRAWInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at input of converter 1"
::= { paramEntry 116 }
conv1MetaCCRAWInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 RAW transport packet (containing CEA-608 data) into output of converter 1"
::= { paramEntry 117 }
conv1MetaCCRAWSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 118 }
conv1MetaCCRAWSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 119 }
conv1MetaCCRAWSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 120 }
conv1MetaCCL21OutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as Line 21 (containing CEA-608 data) at output of converter 1"
::= { paramEntry 121 }
conv1MetaCCL21InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as Line 21 (containing CEA-608 data) at input of converter 1"
::= { paramEntry 122 }
conv1MetaCCL21Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in Line 21 (containing CEA-608 data) into output of converter 1"
::= { paramEntry 123 }
conv1MetaCCL21SourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 124 }
conv1MetaCCL21SourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 125 }
conv1MetaCCL21SourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 126 }
conv1MetaTCLTCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-LTC at input of converter 1"
::= { paramEntry 127 }
conv1MetaTCLTCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-LTC into output of converter 1"
::= { paramEntry 128 }
conv1MetaTCLTCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 129 }
conv1MetaTCLTCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 130 }
conv1MetaTCLTCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-LTC into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 131 }
conv1MetaTCVITCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-VITC at input of converter 1"
::= { paramEntry 132 }
conv1MetaTCVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-VITC into output of converter 1"
::= { paramEntry 133 }
conv1MetaTCVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 134 }
conv1MetaTCVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 135 }
conv1MetaTCVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-VITC into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 136 }
conv1MetaTCDVITCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as DVITC at input of converter 1"
::= { paramEntry 137 }
conv1MetaTCDVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as DVITC into output of converter 1"
::= { paramEntry 138 }
conv1MetaTCDVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as DVITC into output of converter 1. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 139 }
conv1MetaTCDVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as DVITC into output of converter 1. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 140 }
conv1MetaTCDVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as DVITC into output of converter 1. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 141 }
conv1MetaTCLTCOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-LTC on output of converter 1"
::= { paramEntry 142 }
conv1MetaTCVITCOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-VITC on output of converter 1"
::= { paramEntry 143 }
conv1MetaTCDVITCAOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-A on output of converter 1"
::= { paramEntry 144 }
conv1MetaTCDVITCBOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-B on output of converter 1"
::= { paramEntry 145 }
conv1MetaTCDVITCADestination625 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 1 (for even frequency standards)"
::= { paramEntry 146 }
conv1MetaTCDVITCBDestination625 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 1 (for even frequency standards)"
::= { paramEntry 147 }
conv1MetaTCDVITCADestination525 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 1 (for odd frequency standards)"
::= { paramEntry 148 }
conv1MetaTCDVITCBDestination525 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 1 (for odd frequency standards)"
::= { paramEntry 149 }
conv1MetaTCDVITCADetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-A TimeCode has been detected in the input of converter 1"
::= { paramEntry 150 }
conv1MetaTCDVITCBDetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-B TimeCode has been detected in the input of converter 1"
::= { paramEntry 151 }
conv1MetaTCVITCDetectedDVITCLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the incoming VITC shall be inserted into the output of converter 1, when it is encoded as DVITC."
::= { paramEntry 152 }
conv1MetaTCDVITCAutomatic OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable automatic selection of DVITC line for insertion on output of converter 1"
::= { paramEntry 153 }
conv1MetaTXTWSTInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as WST at input of converter 1"
::= { paramEntry 154 }
conv1MetaTXTS2031InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as S2031 transport packet at input of converter 1"
::= { paramEntry 155 }
conv1MetaTXTOP47InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as OP47 Subtitling Distribution Packet at input of converter 1"
::= { paramEntry 156 }
conv1MetaTXTEncoderMode OBJECT-TYPE
SYNTAX TypeConv1MetaTXTEncoderMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext Encoder Settings of converter 1"
::= { paramEntry 157 }
conv1MetaTXTLinesSelectionMode OBJECT-TYPE
SYNTAX TypeConv1MetaTXTLinesSelectionMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext lines selection mode of converter 1"
::= { paramEntry 158 }
conv1MetaField1Overflow OBJECT-TYPE
SYNTAX TypeConv1MetaField1Overflow
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 1 at output of converter 1"
::= { paramEntry 165 }
conv1MetaField2Overflow OBJECT-TYPE
SYNTAX TypeConv1MetaField1Overflow
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 2 at output of converter 1"
::= { paramEntry 166 }
conv1MetaSMPTE2020Status OBJECT-TYPE
SYNTAX TypeConv1MetaSMPTE2020Status
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Meta Data SMPTE 2020 transport packet at input of converter 1"
::= { paramEntry 167 }
conv1MetaSMPTE2020Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of Meta Data SMPTE 2020 transport packet at output of converter 1"
::= { paramEntry 168 }
conv1ModeAutoARto169 OBJECT-TYPE
SYNTAX TypeConv1ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 16:9 mode for Converter 1"
::= { paramEntry 169 }
conv1ModeAutoARto43 OBJECT-TYPE
SYNTAX TypeConv1ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 4:3 mode for Converter 1"
::= { paramEntry 170 }
conv1InsertAFDFullFrame169 OBJECT-TYPE
SYNTAX TypeConv1InsertAFDFullFrame169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AFD Full Frame 16:9 mode for Converter 1"
::= { paramEntry 171 }
conv1ModeAutoFallback OBJECT-TYPE
SYNTAX TypeConv1ModeAutoFallback
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Auto Fallback mode for Converter 1"
::= { paramEntry 172 }
conv2MetaAdvancedSettings OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Activate advanced Meta Data settings of converter 2"
::= { paramEntry 173 }
conv2MetaCCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Close Caption to default for converter 2"
::= { paramEntry 174 }
conv2MetaTCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Time Code to default for converter 2"
::= { paramEntry 175 }
conv2MetaAFDInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AFD detection on input of converter 2"
::= { paramEntry 176 }
conv2MetaVIInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VI detection on input of converter 2"
::= { paramEntry 177 }
conv2MetaWSSInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "WSS detection on input of converter 2"
::= { paramEntry 178 }
conv2MetaCCCDPOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at output of converter 2"
::= { paramEntry 179 }
conv2MetaCCCDPInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at input of converter 2"
::= { paramEntry 180 }
conv2MetaCCCDPInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 2"
::= { paramEntry 181 }
conv2MetaCCCDPSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 182 }
conv2MetaCCCDPSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 183 }
conv2MetaCCCDPSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 184 }
conv2MetaCCRAWOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at output of converter 2"
::= { paramEntry 185 }
conv2MetaCCRAWInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at input of converter 2"
::= { paramEntry 186 }
conv2MetaCCRAWInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 RAW transport packet (containing CEA-608 data) into output of converter 2"
::= { paramEntry 187 }
conv2MetaCCRAWSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 188 }
conv2MetaCCRAWSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 189 }
conv2MetaCCRAWSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 190 }
conv2MetaCCL21OutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as Line 21 (containing CEA-608 data) at output of converter 2"
::= { paramEntry 191 }
conv2MetaCCL21InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as Line 21 (containing CEA-608 data) at input of converter 2"
::= { paramEntry 192 }
conv2MetaCCL21Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in Line 21 (containing CEA-608 data) into output of converter 2"
::= { paramEntry 193 }
conv2MetaCCL21SourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 194 }
conv2MetaCCL21SourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 195 }
conv2MetaCCL21SourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 196 }
conv2MetaTCLTCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-LTC at input of converter 2"
::= { paramEntry 197 }
conv2MetaTCLTCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-LTC into output of converter 2"
::= { paramEntry 198 }
conv2MetaTCLTCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 199 }
conv2MetaTCLTCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 200 }
conv2MetaTCLTCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-LTC into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 201 }
conv2MetaTCVITCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-VITC at input of converter 2"
::= { paramEntry 202 }
conv2MetaTCVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-VITC into output of converter 2"
::= { paramEntry 203 }
conv2MetaTCVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 204 }
conv2MetaTCVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 205 }
conv2MetaTCVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-VITC into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 206 }
conv2MetaTCDVITCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as DVITC at input of converter 2"
::= { paramEntry 207 }
conv2MetaTCDVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as DVITC into output of converter 2"
::= { paramEntry 208 }
conv2MetaTCDVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as DVITC into output of converter 2. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 209 }
conv2MetaTCDVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as DVITC into output of converter 2. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 210 }
conv2MetaTCDVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as DVITC into output of converter 2. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 211 }
conv2MetaTCLTCOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-LTC on output of converter 2"
::= { paramEntry 212 }
conv2MetaTCVITCOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-VITC on output of converter 2"
::= { paramEntry 213 }
conv2MetaTCDVITCAOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-A on output of converter 2"
::= { paramEntry 214 }
conv2MetaTCDVITCBOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-B on output of converter 2"
::= { paramEntry 215 }
conv2MetaTCDVITCADestination625 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 2 (for even frequency standards)"
::= { paramEntry 216 }
conv2MetaTCDVITCBDestination625 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 2 (for even frequency standards)"
::= { paramEntry 217 }
conv2MetaTCDVITCADestination525 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 2 (for odd frequency standards)"
::= { paramEntry 218 }
conv2MetaTCDVITCBDestination525 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 2 (for odd frequency standards)"
::= { paramEntry 219 }
conv2MetaTCDVITCADetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-A TimeCode has been detected in the input of converter 2"
::= { paramEntry 220 }
conv2MetaTCDVITCBDetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-B TimeCode has been detected in the input of converter 2"
::= { paramEntry 221 }
conv2MetaTCVITCDetectedDVITCLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the incoming VITC shall be inserted into the output of converter 2, when it is encoded as DVITC."
::= { paramEntry 222 }
conv2MetaTCDVITCAutomatic OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable automatic selection of DVITC line for insertion on output of converter 2"
::= { paramEntry 223 }
conv2MetaTXTWSTInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as WST at input of converter 2"
::= { paramEntry 224 }
conv2MetaTXTS2031InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as S2031 transport packet at input of converter 2"
::= { paramEntry 225 }
conv2MetaTXTOP47InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as OP47 Subtitling Distribution Packet at input of converter 2"
::= { paramEntry 226 }
conv2MetaTXTEncoderMode OBJECT-TYPE
SYNTAX TypeConv1MetaTXTEncoderMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext Encoder Settings of converter 2"
::= { paramEntry 227 }
conv2MetaTXTLinesSelectionMode OBJECT-TYPE
SYNTAX TypeConv1MetaTXTLinesSelectionMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext lines selection mode of converter 2"
::= { paramEntry 228 }
conv2MetaField1Overflow OBJECT-TYPE
SYNTAX TypeConv1MetaField1Overflow
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 1 at output of converter 2"
::= { paramEntry 235 }
conv2MetaField2Overflow OBJECT-TYPE
SYNTAX TypeConv1MetaField1Overflow
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 2 at output of converter 2"
::= { paramEntry 236 }
conv2MetaSMPTE2020Status OBJECT-TYPE
SYNTAX TypeConv1MetaSMPTE2020Status
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Meta Data SMPTE 2020 transport packet at input of converter 2"
::= { paramEntry 237 }
conv2MetaSMPTE2020Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of Meta Data SMPTE 2020 transport packet at output of converter 2"
::= { paramEntry 238 }
conv2ModeAutoARto169 OBJECT-TYPE
SYNTAX TypeConv1ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 16:9 mode for Converter 2"
::= { paramEntry 239 }
conv2ModeAutoARto43 OBJECT-TYPE
SYNTAX TypeConv1ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 4:3 mode for Converter 2"
::= { paramEntry 240 }
conv2InsertAFDFullFrame169 OBJECT-TYPE
SYNTAX TypeConv1InsertAFDFullFrame169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AFD Full Frame 16:9 mode for Converter 2"
::= { paramEntry 241 }
conv2ModeAutoFallback OBJECT-TYPE
SYNTAX TypeConv1ModeAutoFallback
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Auto Fallback mode for Converter 2"
::= { paramEntry 242 }
conv3MetaAdvancedSettings OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Activate advanced Meta Data settings of converter 3"
::= { paramEntry 243 }
conv3MetaCCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Close Caption to default for converter 3"
::= { paramEntry 244 }
conv3MetaTCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Time Code to default for converter 3"
::= { paramEntry 245 }
conv3MetaAFDInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AFD detection on input of converter 3"
::= { paramEntry 246 }
conv3MetaVIInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VI detection on input of converter 3"
::= { paramEntry 247 }
conv3MetaWSSInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "WSS detection on input of converter 3"
::= { paramEntry 248 }
conv3MetaCCCDPOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at output of converter 3"
::= { paramEntry 249 }
conv3MetaCCCDPInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at input of converter 3"
::= { paramEntry 250 }
conv3MetaCCCDPInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3"
::= { paramEntry 251 }
conv3MetaCCCDPSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 252 }
conv3MetaCCCDPSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 253 }
conv3MetaCCCDPSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 254 }
conv3MetaCCRAWOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at output of converter 3"
::= { paramEntry 255 }
conv3MetaCCRAWInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at input of converter 3"
::= { paramEntry 256 }
conv3MetaCCRAWInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 RAW transport packet (containing CEA-608 data) into output of converter 3"
::= { paramEntry 257 }
conv3MetaCCRAWSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 258 }
conv3MetaCCRAWSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 259 }
conv3MetaCCRAWSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 260 }
conv3MetaCCL21OutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as Line 21 (containing CEA-608 data) at output of converter 3"
::= { paramEntry 261 }
conv3MetaCCL21InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as Line 21 (containing CEA-608 data) at input of converter 3"
::= { paramEntry 262 }
conv3MetaCCL21Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in Line 21 (containing CEA-608 data) into output of converter 3"
::= { paramEntry 263 }
conv3MetaCCL21SourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 264 }
conv3MetaCCL21SourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 265 }
conv3MetaCCL21SourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 266 }
conv3MetaTCLTCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-LTC at input of converter 3"
::= { paramEntry 267 }
conv3MetaTCLTCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-LTC into output of converter 3"
::= { paramEntry 268 }
conv3MetaTCLTCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 269 }
conv3MetaTCLTCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 270 }
conv3MetaTCLTCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-LTC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 271 }
conv3MetaTCVITCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-VITC at input of converter 3"
::= { paramEntry 272 }
conv3MetaTCVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-VITC into output of converter 3"
::= { paramEntry 273 }
conv3MetaTCVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 274 }
conv3MetaTCVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 275 }
conv3MetaTCVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-VITC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 276 }
conv3MetaTCDVITCInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as DVITC at input of converter 3"
::= { paramEntry 277 }
conv3MetaTCDVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as DVITC into output of converter 3"
::= { paramEntry 278 }
conv3MetaTCDVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as DVITC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 279 }
conv3MetaTCDVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as DVITC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 280 }
conv3MetaTCDVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv1MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as DVITC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 281 }
conv3MetaTCLTCOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-LTC on output of converter 3"
::= { paramEntry 282 }
conv3MetaTCVITCOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-VITC on output of converter 3"
::= { paramEntry 283 }
conv3MetaTCDVITCAOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-A on output of converter 3"
::= { paramEntry 284 }
conv3MetaTCDVITCBOutStatus OBJECT-TYPE
SYNTAX TypeConv1MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-B on output of converter 3"
::= { paramEntry 285 }
conv3MetaTCDVITCADestination625 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 3 (for even frequency standards)"
::= { paramEntry 286 }
conv3MetaTCDVITCBDestination625 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 3 (for even frequency standards)"
::= { paramEntry 287 }
conv3MetaTCDVITCADestination525 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 3 (for odd frequency standards)"
::= { paramEntry 288 }
conv3MetaTCDVITCBDestination525 OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 3 (for odd frequency standards)"
::= { paramEntry 289 }
conv3MetaTCDVITCADetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-A TimeCode has been detected in the input of converter 3"
::= { paramEntry 290 }
conv3MetaTCDVITCBDetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-B TimeCode has been detected in the input of converter 3"
::= { paramEntry 291 }
conv3MetaTCVITCDetectedDVITCLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the incoming VITC shall be inserted into the output of converter 3, when it is encoded as DVITC."
::= { paramEntry 292 }
conv3MetaTCDVITCAutomatic OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable automatic selection of DVITC line for insertion on output of converter 3"
::= { paramEntry 293 }
conv3MetaTXTWSTInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as WST at input of converter 3"
::= { paramEntry 294 }
conv3MetaTXTS2031InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as S2031 transport packet at input of converter 3"
::= { paramEntry 295 }
conv3MetaTXTOP47InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as OP47 Subtitling Distribution Packet at input of converter 3"
::= { paramEntry 296 }
conv3MetaTXTEncoderMode OBJECT-TYPE
SYNTAX TypeConv1MetaTXTEncoderMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext Encoder Settings of converter 3"
::= { paramEntry 297 }
conv3MetaTXTLinesSelectionMode OBJECT-TYPE
SYNTAX TypeConv1MetaTXTLinesSelectionMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext lines selection mode of converter 3"
::= { paramEntry 298 }
conv3MetaField1Overflow OBJECT-TYPE
SYNTAX TypeConv1MetaField1Overflow
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 1 at output of converter 3"
::= { paramEntry 305 }
conv3MetaField2Overflow OBJECT-TYPE
SYNTAX TypeConv1MetaField1Overflow
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 2 at output of converter 3"
::= { paramEntry 306 }
conv3MetaSMPTE2020Status OBJECT-TYPE
SYNTAX TypeConv1MetaSMPTE2020Status
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Meta Data SMPTE 2020 transport packet at input of converter 3"
::= { paramEntry 307 }
conv3MetaSMPTE2020Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of Meta Data SMPTE 2020 transport packet at output of converter 3"
::= { paramEntry 308 }
conv3ModeAutoARto169 OBJECT-TYPE
SYNTAX TypeConv1ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 16:9 mode for Converter 3"
::= { paramEntry 309 }
conv3ModeAutoARto43 OBJECT-TYPE
SYNTAX TypeConv1ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 4:3 mode for Converter 3"
::= { paramEntry 310 }
conv3InsertAFDFullFrame169 OBJECT-TYPE
SYNTAX TypeConv1InsertAFDFullFrame169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AFD Full Frame 16:9 mode for Converter 3"
::= { paramEntry 311 }
conv3ModeAutoFallback OBJECT-TYPE
SYNTAX TypeConv1ModeAutoFallback
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Auto Fallback mode for Converter 3"
::= { paramEntry 312 }
sDIIn1TXTWSTInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as WST at SDI Input 1"
::= { paramEntry 313 }
sDIIn1TXTS2031InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as S2031 transport packet at SDI Input 1"
::= { paramEntry 314 }
sDIIn1TXTOP47InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as OP47 transport packet at SDI Input 1"
::= { paramEntry 315 }
sDIIn1TXTDecoderMode OBJECT-TYPE
SYNTAX TypeSDIIn1TXTDecoderMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext Decoder Settings at SDI Input 1"
::= { paramEntry 316 }
sDIIn2TXTWSTInStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as WST at SDI Input 2"
::= { paramEntry 317 }
sDIIn2TXTS2031InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as S2031 transport packet at SDI Input 2"
::= { paramEntry 318 }
sDIIn2TXTOP47InStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as OP47 transport packet at SDI Input 2"
::= { paramEntry 319 }
sDIIn2TXTDecoderMode OBJECT-TYPE
SYNTAX TypeSDIIn1TXTDecoderMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext Decoder Settings at SDI Input 2"
::= { paramEntry 320 }
sDIIn1TCDVITCASource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 1 (for even-frequency standards)"
::= { paramEntry 321 }
sDIIn1TCDVITCBSource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 1 (for even-frequency standards)"
::= { paramEntry 322 }
sDIIn1TCDVITCASource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 1 (for odd-frequency standards)"
::= { paramEntry 323 }
sDIIn1TCDVITCBSource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 1 (for odd-frequency standards)"
::= { paramEntry 324 }
sDIIn2TCDVITCASource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 2 (for even-frequency standards)"
::= { paramEntry 325 }
sDIIn2TCDVITCBSource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 2 (for even-frequency standards)"
::= { paramEntry 326 }
sDIIn2TCDVITCASource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 2 (for odd-frequency standards)"
::= { paramEntry 327 }
sDIIn2TCDVITCBSource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 2 (for odd-frequency standards)"
::= { paramEntry 328 }
sDIIn1CCCDPStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at SDI Input 1"
::= { paramEntry 329 }
sDIIn1CCRAWStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at SDI Input 1"
::= { paramEntry 330 }
sDIIn1CCL21Status OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as Line 21 (containing CEA-608 data) at SDI Input 1"
::= { paramEntry 331 }
sDIIn1TCLTCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-LTC at SDI Input 1"
::= { paramEntry 332 }
sDIIn1TCVITCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-VITC at SDI Input 1"
::= { paramEntry 333 }
sDIIn1TCDVITCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as DVITC at SDI Input 1"
::= { paramEntry 334 }
sDIIn2CCCDPStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at SDI Input 2"
::= { paramEntry 335 }
sDIIn2CCRAWStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at SDI Input 2"
::= { paramEntry 336 }
sDIIn2CCL21Status OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as Line 21 (containing CEA-608 data) at SDI Input 2"
::= { paramEntry 337 }
sDIIn2TCLTCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-LTC at SDI Input 2"
::= { paramEntry 338 }
sDIIn2TCVITCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-VITC at SDI Input 2"
::= { paramEntry 339 }
sDIIn2TCDVITCStatus OBJECT-TYPE
SYNTAX TypeConv1MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as DVITC at SDI Input 2"
::= { paramEntry 340 }
out1Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 1 to Input (direct) or to one of the Converters"
::= { paramEntry 341 }
out1Standard OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 1"
::= { paramEntry 342 }
out2Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 2 to Input (direct) or to one of the Converters"
::= { paramEntry 343 }
out2Standard OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 2"
::= { paramEntry 344 }
out3Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 3 to Input (direct) or to one of the Converters"
::= { paramEntry 345 }
out3Standard OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 3"
::= { paramEntry 346 }
out4Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 4 to Input (direct) or to one of the Converters"
::= { paramEntry 347 }
out4Standard OBJECT-TYPE
SYNTAX TypeConv1StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 4"
::= { paramEntry 348 }
out1DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in frames. Combine with Out1/DelayLines and Out1/DelayPixel for total delay"
::= { paramEntry 349 }
out1DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in lines. Combine with Out1/DelayFrames and Out1/DelayPixel for total delay"
::= { paramEntry 350 }
out1DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in pixel. Combine with Out1/DelayFrames and Out1/DelayLines for total delay"
::= { paramEntry 351 }
out1DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 user delay in milliseconds."
::= { paramEntry 352 }
out1ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable aperture correction"
::= { paramEntry 353 }
out1ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: aperture correction level"
::= { paramEntry 354 }
out1HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable H-Blanking"
::= { paramEntry 355 }
out1VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable V-Blanking"
::= { paramEntry 356 }
out1Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust Video Gain"
::= { paramEntry 357 }
out1Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Saturation"
::= { paramEntry 358 }
out1BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
::= { paramEntry 359 }
out1Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Hue"
::= { paramEntry 360 }
out1TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 361 }
out1TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 362 }
out1TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable preselected test pattern"
::= { paramEntry 363 }
out1CSC OBJECT-TYPE
SYNTAX TypeOut1CSC
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Color Space Conversion Operation, SDI Out 1
- bypass completely
- convert luma&chroma
- convert only chroma"
::= { paramEntry 364 }
out1CSCMode OBJECT-TYPE
SYNTAX TypeOut1CSCMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Color Space Conversion Mode of SDI Out 1"
::= { paramEntry 365 }
out1IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 366 }
out1ModifyPsF OBJECT-TYPE
SYNTAX TypeOut1ModifyPsF
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.
This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
::= { paramEntry 367 }
out2DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in frames. Combine with Out2/DelayLines and Out2/DelayPixel for total delay"
::= { paramEntry 368 }
out2DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in lines. Combine with Out2/DelayFrames and Out2/DelayPixel for total delay"
::= { paramEntry 369 }
out2DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in pixel. Combine with Out2/DelayFrames and Out2/DelayLines for total delay"
::= { paramEntry 370 }
out2DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 user delay in milliseconds."
::= { paramEntry 371 }
out2ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable aperture correction"
::= { paramEntry 372 }
out2ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: aperture correction level"
::= { paramEntry 373 }
out2HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable H-Blanking"
::= { paramEntry 374 }
out2VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable V-Blanking"
::= { paramEntry 375 }
out2Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust Video Gain"
::= { paramEntry 376 }
out2Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Saturation"
::= { paramEntry 377 }
out2BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video black level (in IRE)"
::= { paramEntry 378 }
out2Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Hue"
::= { paramEntry 379 }
out2TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 380 }
out2TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out2/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 381 }
out2TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable preselected test pattern"
::= { paramEntry 382 }
out2CSC OBJECT-TYPE
SYNTAX TypeOut1CSC
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Color Space Conversion Operation, SDI Out 2
- bypass completely
- convert luma&chroma
- convert only chroma"
::= { paramEntry 383 }
out2CSCMode OBJECT-TYPE
SYNTAX TypeOut1CSCMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Color Space Conversion Mode of SDI Out 2"
::= { paramEntry 384 }
out2IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 385 }
out2ModifyPsF OBJECT-TYPE
SYNTAX TypeOut1ModifyPsF
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.
This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
::= { paramEntry 386 }
out3DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 delay in frames. Combine with Out3/DelayLines and Out3/DelayPixel for total delay"
::= { paramEntry 387 }
out3DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 delay in lines. Combine with Out3/DelayFrames and Out3/DelayPixel for total delay"
::= { paramEntry 388 }
out3DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 delay in pixel. Combine with Out3/DelayFrames and Out3/DelayLines for total delay"
::= { paramEntry 389 }
out3DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3 user delay in milliseconds."
::= { paramEntry 390 }
out3ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable aperture correction"
::= { paramEntry 391 }
out3ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: aperture correction level"
::= { paramEntry 392 }
out3HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable H-Blanking"
::= { paramEntry 393 }
out3VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable V-Blanking"
::= { paramEntry 394 }
out3Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust Video Gain"
::= { paramEntry 395 }
out3Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust video Saturation"
::= { paramEntry 396 }
out3BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust video black level (in IRE)"
::= { paramEntry 397 }
out3Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: adjust video Hue"
::= { paramEntry 398 }
out3TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 399 }
out3TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out3/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 400 }
out3TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: enable preselected test pattern"
::= { paramEntry 401 }
out3CSC OBJECT-TYPE
SYNTAX TypeOut1CSC
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Color Space Conversion Operation, SDI Out 3
- bypass completely
- convert luma&chroma
- convert only chroma"
::= { paramEntry 402 }
out3CSCMode OBJECT-TYPE
SYNTAX TypeOut1CSCMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Color Space Conversion Mode of SDI Out 3"
::= { paramEntry 403 }
out3IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 404 }
out3ModifyPsF OBJECT-TYPE
SYNTAX TypeOut1ModifyPsF
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.
This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
::= { paramEntry 405 }
out4DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4 delay in frames. Combine with Out4/DelayLines and Out4/DelayPixel for total delay"
::= { paramEntry 406 }
out4DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4 delay in lines. Combine with Out4/DelayFrames and Out4/DelayPixel for total delay"
::= { paramEntry 407 }
out4DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4 delay in pixel. Combine with Out4/DelayFrames and Out4/DelayLines for total delay"
::= { paramEntry 408 }
out4DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4 user delay in milliseconds."
::= { paramEntry 409 }
out4ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: enable aperture correction"
::= { paramEntry 410 }
out4ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: aperture correction level"
::= { paramEntry 411 }
out4HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: enable H-Blanking"
::= { paramEntry 412 }
out4VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: enable V-Blanking"
::= { paramEntry 413 }
out4Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: adjust Video Gain"
::= { paramEntry 414 }
out4Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: adjust video Saturation"
::= { paramEntry 415 }
out4BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: adjust video black level (in IRE)"
::= { paramEntry 416 }
out4Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: adjust video Hue"
::= { paramEntry 417 }
out4TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 418 }
out4TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out4/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 419 }
out4TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: enable preselected test pattern"
::= { paramEntry 420 }
out4CSC OBJECT-TYPE
SYNTAX TypeOut1CSC
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Color Space Conversion Operation, SDI Out 4
- bypass completely
- convert luma&chroma
- convert only chroma"
::= { paramEntry 421 }
out4CSCMode OBJECT-TYPE
SYNTAX TypeOut1CSCMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Color Space Conversion Mode of SDI Out 4"
::= { paramEntry 422 }
out4IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 423 }
out4ModifyPsF OBJECT-TYPE
SYNTAX TypeOut1ModifyPsF
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.
This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
::= { paramEntry 424 }
inputStatusAES1 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 1"
::= { paramEntry 425 }
inputStatusAES2 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 2"
::= { paramEntry 426 }
inputStatusAES3 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 3"
::= { paramEntry 427 }
inputStatusAES4 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 4"
::= { paramEntry 428 }
sourceInternAudio1 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 1"
::= { paramEntry 429 }
sourceInternAudio2 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 2"
::= { paramEntry 430 }
sourceInternAudio3 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 3"
::= { paramEntry 431 }
sourceInternAudio4 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 4"
::= { paramEntry 432 }
sourceInternAudio5 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 5"
::= { paramEntry 433 }
sourceInternAudio6 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 6"
::= { paramEntry 434 }
sourceInternAudio7 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 7"
::= { paramEntry 435 }
sourceInternAudio8 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 8"
::= { paramEntry 436 }
sourceInternAudio9 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 9"
::= { paramEntry 437 }
sourceInternAudio10 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 10"
::= { paramEntry 438 }
sourceInternAudio11 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 11"
::= { paramEntry 439 }
sourceInternAudio12 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 12"
::= { paramEntry 440 }
sourceInternAudio13 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 13"
::= { paramEntry 441 }
sourceInternAudio14 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 14"
::= { paramEntry 442 }
sourceInternAudio15 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 15"
::= { paramEntry 443 }
sourceInternAudio16 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 16"
::= { paramEntry 444 }
sourceInternAudio17 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 17"
::= { paramEntry 445 }
sourceInternAudio18 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 18"
::= { paramEntry 446 }
sourceInternAudio19 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 19"
::= { paramEntry 447 }
sourceInternAudio20 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 20"
::= { paramEntry 448 }
sourceInternAudioDirect11 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 21"
::= { paramEntry 449 }
sourceInternAudioDirect12 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 22"
::= { paramEntry 450 }
sourceInternAudioDirect13 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 23"
::= { paramEntry 451 }
sourceInternAudioDirect14 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 24"
::= { paramEntry 452 }
sourceInternAudioDirect21 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 25"
::= { paramEntry 453 }
sourceInternAudioDirect22 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 26"
::= { paramEntry 454 }
sourceInternAudioDirect23 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 27"
::= { paramEntry 455 }
sourceInternAudioDirect24 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 28"
::= { paramEntry 456 }
sRC1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 1 ON/OFF"
::= { paramEntry 457 }
sRC2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 2 ON/OFF"
::= { paramEntry 458 }
sRC3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 3 ON/OFF"
::= { paramEntry 459 }
sRC4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 4 ON/OFF"
::= { paramEntry 460 }
sRC5 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 5 ON/OFF"
::= { paramEntry 461 }
sRC6 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 6 ON/OFF"
::= { paramEntry 462 }
sRC7 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 7 ON/OFF"
::= { paramEntry 463 }
sRC8 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 8 ON/OFF"
::= { paramEntry 464 }
audioGain1L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 1 L"
::= { paramEntry 465 }
audioMute1L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 1L"
::= { paramEntry 466 }
audioInvert1L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 1L"
::= { paramEntry 467 }
audioSilence1L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 1L"
::= { paramEntry 468 }
audioOverload1L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 1 L"
::= { paramEntry 469 }
audioGain1R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 1 R"
::= { paramEntry 470 }
audioMute1R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 1R"
::= { paramEntry 471 }
audioInvert1R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 1R"
::= { paramEntry 472 }
audioSilence1R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 1R"
::= { paramEntry 473 }
audioOverload1R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 1 R"
::= { paramEntry 474 }
audioMixDown1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 475 }
audioGain2L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 2 L"
::= { paramEntry 476 }
audioMute2L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 2L"
::= { paramEntry 477 }
audioInvert2L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 2L"
::= { paramEntry 478 }
audioSilence2L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 2L"
::= { paramEntry 479 }
audioOverload2L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 2 L"
::= { paramEntry 480 }
audioGain2R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 2 R"
::= { paramEntry 481 }
audioMute2R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 2R"
::= { paramEntry 482 }
audioInvert2R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 2R"
::= { paramEntry 483 }
audioSilence2R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 2R"
::= { paramEntry 484 }
audioOverload2R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 2 R"
::= { paramEntry 485 }
audioMixDown2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 486 }
audioGain3L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 3 L"
::= { paramEntry 487 }
audioMute3L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 3L"
::= { paramEntry 488 }
audioInvert3L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 3L"
::= { paramEntry 489 }
audioSilence3L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 3L"
::= { paramEntry 490 }
audioOverload3L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 3 L"
::= { paramEntry 491 }
audioGain3R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 3 R"
::= { paramEntry 492 }
audioMute3R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 3R"
::= { paramEntry 493 }
audioInvert3R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 3R"
::= { paramEntry 494 }
audioSilence3R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 3R"
::= { paramEntry 495 }
audioOverload3R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 3 R"
::= { paramEntry 496 }
audioMixDown3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 497 }
audioGain4L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 4 L"
::= { paramEntry 498 }
audioMute4L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 4L"
::= { paramEntry 499 }
audioInvert4L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 4L"
::= { paramEntry 500 }
audioSilence4L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 4L"
::= { paramEntry 501 }
audioOverload4L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 4 L"
::= { paramEntry 502 }
audioGain4R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 4 R"
::= { paramEntry 503 }
audioMute4R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 4R"
::= { paramEntry 504 }
audioInvert4R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 4R"
::= { paramEntry 505 }
audioSilence4R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 4R"
::= { paramEntry 506 }
audioOverload4R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 4 R"
::= { paramEntry 507 }
audioMixDown4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 508 }
audioGain5L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 5 L"
::= { paramEntry 509 }
audioMute5L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 5L"
::= { paramEntry 510 }
audioInvert5L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 5L"
::= { paramEntry 511 }
audioSilence5L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 5L"
::= { paramEntry 512 }
audioOverload5L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 5 L"
::= { paramEntry 513 }
audioGain5R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 5 R"
::= { paramEntry 514 }
audioMute5R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 5R"
::= { paramEntry 515 }
audioInvert5R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 5R"
::= { paramEntry 516 }
audioSilence5R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 5R"
::= { paramEntry 517 }
audioOverload5R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 5 R"
::= { paramEntry 518 }
audioMixDown5 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 519 }
audioGain6L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 6 L"
::= { paramEntry 520 }
audioMute6L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 6L"
::= { paramEntry 521 }
audioInvert6L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 6L"
::= { paramEntry 522 }
audioSilence6L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 6L"
::= { paramEntry 523 }
audioOverload6L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 6 L"
::= { paramEntry 524 }
audioGain6R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 6 R"
::= { paramEntry 525 }
audioMute6R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 6R"
::= { paramEntry 526 }
audioInvert6R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 6R"
::= { paramEntry 527 }
audioSilence6R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 6R"
::= { paramEntry 528 }
audioOverload6R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 6 R"
::= { paramEntry 529 }
audioMixDown6 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 530 }
audioGain7L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 7 L"
::= { paramEntry 531 }
audioMute7L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 7L"
::= { paramEntry 532 }
audioInvert7L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 7L"
::= { paramEntry 533 }
audioSilence7L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 7L"
::= { paramEntry 534 }
audioOverload7L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 7 L"
::= { paramEntry 535 }
audioGain7R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 7 R"
::= { paramEntry 536 }
audioMute7R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 7R"
::= { paramEntry 537 }
audioInvert7R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 7R"
::= { paramEntry 538 }
audioSilence7R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 7R"
::= { paramEntry 539 }
audioOverload7R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 7 R"
::= { paramEntry 540 }
audioMixDown7 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 541 }
audioGain8L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 8 L"
::= { paramEntry 542 }
audioMute8L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 8L"
::= { paramEntry 543 }
audioInvert8L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 8L"
::= { paramEntry 544 }
audioSilence8L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 8L"
::= { paramEntry 545 }
audioOverload8L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 8 L"
::= { paramEntry 546 }
audioGain8R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 8 R"
::= { paramEntry 547 }
audioMute8R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 8R"
::= { paramEntry 548 }
audioInvert8R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 8R"
::= { paramEntry 549 }
audioSilence8R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 8R"
::= { paramEntry 550 }
audioOverload8R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 8 R"
::= { paramEntry 551 }
audioMixDown8 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 552 }
audioGain9L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 9 L"
::= { paramEntry 553 }
audioMute9L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 9L"
::= { paramEntry 554 }
audioInvert9L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 9L"
::= { paramEntry 555 }
audioSilence9L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 9L"
::= { paramEntry 556 }
audioOverload9L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 9 L"
::= { paramEntry 557 }
audioGain9R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 9 R"
::= { paramEntry 558 }
audioMute9R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 9R"
::= { paramEntry 559 }
audioInvert9R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 9R"
::= { paramEntry 560 }
audioSilence9R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 9R"
::= { paramEntry 561 }
audioOverload9R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 9 R"
::= { paramEntry 562 }
audioMixDown9 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 563 }
audioGain10L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 10 L"
::= { paramEntry 564 }
audioMute10L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 10L"
::= { paramEntry 565 }
audioInvert10L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 10L"
::= { paramEntry 566 }
audioSilence10L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 10L"
::= { paramEntry 567 }
audioOverload10L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 10 L"
::= { paramEntry 568 }
audioGain10R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 10 R"
::= { paramEntry 569 }
audioMute10R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 10R"
::= { paramEntry 570 }
audioInvert10R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 10R"
::= { paramEntry 571 }
audioSilence10R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 10R"
::= { paramEntry 572 }
audioOverload10R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 10 R"
::= { paramEntry 573 }
audioMixDown10 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 574 }
audioGain11L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 11 L"
::= { paramEntry 575 }
audioMute11L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 11L"
::= { paramEntry 576 }
audioInvert11L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 11L"
::= { paramEntry 577 }
audioSilence11L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 11L"
::= { paramEntry 578 }
audioOverload11L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 11 L"
::= { paramEntry 579 }
audioGain11R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 11 R"
::= { paramEntry 580 }
audioMute11R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 11R"
::= { paramEntry 581 }
audioInvert11R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 11R"
::= { paramEntry 582 }
audioSilence11R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 11R"
::= { paramEntry 583 }
audioOverload11R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 11 R"
::= { paramEntry 584 }
audioMixDown11 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 585 }
audioGain12L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 12 L"
::= { paramEntry 586 }
audioMute12L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 12L"
::= { paramEntry 587 }
audioInvert12L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 12L"
::= { paramEntry 588 }
audioSilence12L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 12L"
::= { paramEntry 589 }
audioOverload12L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 12 L"
::= { paramEntry 590 }
audioGain12R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 12 R"
::= { paramEntry 591 }
audioMute12R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 12R"
::= { paramEntry 592 }
audioInvert12R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 12R"
::= { paramEntry 593 }
audioSilence12R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 12R"
::= { paramEntry 594 }
audioOverload12R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 12 R"
::= { paramEntry 595 }
audioMixDown12 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 596 }
audioGain13L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 13 L"
::= { paramEntry 597 }
audioMute13L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 13L"
::= { paramEntry 598 }
audioInvert13L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 13L"
::= { paramEntry 599 }
audioSilence13L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 13L"
::= { paramEntry 600 }
audioOverload13L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 13 L"
::= { paramEntry 601 }
audioGain13R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 13 R"
::= { paramEntry 602 }
audioMute13R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 13R"
::= { paramEntry 603 }
audioInvert13R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 13R"
::= { paramEntry 604 }
audioSilence13R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 13R"
::= { paramEntry 605 }
audioOverload13R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 13 R"
::= { paramEntry 606 }
audioMixDown13 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 607 }
audioGain14L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 14 L"
::= { paramEntry 608 }
audioMute14L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 14L"
::= { paramEntry 609 }
audioInvert14L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 14L"
::= { paramEntry 610 }
audioSilence14L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 14L"
::= { paramEntry 611 }
audioOverload14L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 14 L"
::= { paramEntry 612 }
audioGain14R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 14 R"
::= { paramEntry 613 }
audioMute14R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 14R"
::= { paramEntry 614 }
audioInvert14R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 14R"
::= { paramEntry 615 }
audioSilence14R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 14R"
::= { paramEntry 616 }
audioOverload14R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 14 R"
::= { paramEntry 617 }
audioMixDown14 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 618 }
audioGain15L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 15 L"
::= { paramEntry 619 }
audioMute15L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 15L"
::= { paramEntry 620 }
audioInvert15L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 15L"
::= { paramEntry 621 }
audioSilence15L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 15L"
::= { paramEntry 622 }
audioOverload15L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 15 L"
::= { paramEntry 623 }
audioGain15R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 15 R"
::= { paramEntry 624 }
audioMute15R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 15R"
::= { paramEntry 625 }
audioInvert15R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 15R"
::= { paramEntry 626 }
audioSilence15R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 15R"
::= { paramEntry 627 }
audioOverload15R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 15 R"
::= { paramEntry 628 }
audioMixDown15 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 629 }
audioGain16L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 16 L"
::= { paramEntry 630 }
audioMute16L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 16L"
::= { paramEntry 631 }
audioInvert16L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 16L"
::= { paramEntry 632 }
audioSilence16L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 16L"
::= { paramEntry 633 }
audioOverload16L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 16 L"
::= { paramEntry 634 }
audioGain16R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 16 R"
::= { paramEntry 635 }
audioMute16R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 16R"
::= { paramEntry 636 }
audioInvert16R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 16R"
::= { paramEntry 637 }
audioSilence16R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 16R"
::= { paramEntry 638 }
audioOverload16R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 16 R"
::= { paramEntry 639 }
audioMixDown16 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 640 }
audioGain17L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 17 L"
::= { paramEntry 641 }
audioMute17L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 17L"
::= { paramEntry 642 }
audioInvert17L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 17L"
::= { paramEntry 643 }
audioSilence17L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 17L"
::= { paramEntry 644 }
audioOverload17L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 17 L"
::= { paramEntry 645 }
audioGain17R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 17 R"
::= { paramEntry 646 }
audioMute17R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 17R"
::= { paramEntry 647 }
audioInvert17R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 17R"
::= { paramEntry 648 }
audioSilence17R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 17R"
::= { paramEntry 649 }
audioOverload17R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 17 R"
::= { paramEntry 650 }
audioMixDown17 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 651 }
audioGain18L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 18 L"
::= { paramEntry 652 }
audioMute18L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 18L"
::= { paramEntry 653 }
audioInvert18L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 18L"
::= { paramEntry 654 }
audioSilence18L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 18L"
::= { paramEntry 655 }
audioOverload18L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 18 L"
::= { paramEntry 656 }
audioGain18R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 18 R"
::= { paramEntry 657 }
audioMute18R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 18R"
::= { paramEntry 658 }
audioInvert18R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 18R"
::= { paramEntry 659 }
audioSilence18R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 18R"
::= { paramEntry 660 }
audioOverload18R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 18 R"
::= { paramEntry 661 }
audioMixDown18 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 662 }
audioGain19L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 19 L"
::= { paramEntry 663 }
audioMute19L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 19L"
::= { paramEntry 664 }
audioInvert19L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 19L"
::= { paramEntry 665 }
audioSilence19L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 19L"
::= { paramEntry 666 }
audioOverload19L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 19 L"
::= { paramEntry 667 }
audioGain19R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 19 R"
::= { paramEntry 668 }
audioMute19R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 19R"
::= { paramEntry 669 }
audioInvert19R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 19R"
::= { paramEntry 670 }
audioSilence19R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 19R"
::= { paramEntry 671 }
audioOverload19R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 19 R"
::= { paramEntry 672 }
audioMixDown19 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 673 }
audioGain20L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 20 L"
::= { paramEntry 674 }
audioMute20L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 20L"
::= { paramEntry 675 }
audioInvert20L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 20L"
::= { paramEntry 676 }
audioSilence20L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 20L"
::= { paramEntry 677 }
audioOverload20L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 20 L"
::= { paramEntry 678 }
audioGain20R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 20 R"
::= { paramEntry 679 }
audioMute20R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 20R"
::= { paramEntry 680 }
audioInvert20R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 20R"
::= { paramEntry 681 }
audioSilence20R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 20R"
::= { paramEntry 682 }
audioOverload20R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 20 R"
::= { paramEntry 683 }
audioMixDown20 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 684 }
bits11 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 1"
::= { paramEntry 685 }
bits12 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 2"
::= { paramEntry 686 }
bits13 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 3"
::= { paramEntry 687 }
bits14 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 4"
::= { paramEntry 688 }
bits21 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 1"
::= { paramEntry 689 }
bits22 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 2"
::= { paramEntry 690 }
bits23 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 3"
::= { paramEntry 691 }
bits24 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 4"
::= { paramEntry 692 }
bits31 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 1"
::= { paramEntry 693 }
bits32 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 2"
::= { paramEntry 694 }
bits33 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 3"
::= { paramEntry 695 }
bits34 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 3, Group 4"
::= { paramEntry 696 }
bits41 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 4, Group 1"
::= { paramEntry 697 }
bits42 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 4, Group 2"
::= { paramEntry 698 }
bits43 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 4, Group 3"
::= { paramEntry 699 }
bits44 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 4, Group 4"
::= { paramEntry 700 }
sourceAudioOutAES1L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 1L"
::= { paramEntry 701 }
sourceAudioOutAES1R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 1R"
::= { paramEntry 702 }
sourceAudioOutAES2L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 2L"
::= { paramEntry 703 }
sourceAudioOutAES2R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 2R"
::= { paramEntry 704 }
sourceAudioOutAES3L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 3L"
::= { paramEntry 705 }
sourceAudioOutAES3R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 3R"
::= { paramEntry 706 }
sourceAudioOutAES4L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 4L"
::= { paramEntry 707 }
sourceAudioOutAES4R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 4R"
::= { paramEntry 708 }
sourceAudioOutMUX11L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 1 (group 1.1), L"
::= { paramEntry 709 }
sourceAudioOutMUX11R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 1 (group 1.1), R"
::= { paramEntry 710 }
sourceAudioOutMUX12L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 2 (group 1.2), L"
::= { paramEntry 711 }
sourceAudioOutMUX12R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 2 (group 1.2), R"
::= { paramEntry 712 }
sourceAudioOutMUX13L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 3 (group 2.1), L"
::= { paramEntry 713 }
sourceAudioOutMUX13R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 3 (group 2.1), R"
::= { paramEntry 714 }
sourceAudioOutMUX14L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 4 (group 2.2), L"
::= { paramEntry 715 }
sourceAudioOutMUX14R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 4 (group 2.2), R"
::= { paramEntry 716 }
sourceAudioOutMUX15L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 5 (group 3.1), L"
::= { paramEntry 717 }
sourceAudioOutMUX15R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 5 (group 3.1), R"
::= { paramEntry 718 }
sourceAudioOutMUX16L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 6 (group 3.2), L"
::= { paramEntry 719 }
sourceAudioOutMUX16R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 6 (group 3.2), R"
::= { paramEntry 720 }
sourceAudioOutMUX17L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 7 (group 4.1), L"
::= { paramEntry 721 }
sourceAudioOutMUX17R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 7 (group 4.1), R"
::= { paramEntry 722 }
sourceAudioOutMUX18L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 8 (group 4.2), L"
::= { paramEntry 723 }
sourceAudioOutMUX18R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 8 (group 4.2), R"
::= { paramEntry 724 }
sourceAudioOutMUX21L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 1 (group 1.1), L"
::= { paramEntry 725 }
sourceAudioOutMUX21R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 1 (group 1.1), R"
::= { paramEntry 726 }
sourceAudioOutMUX22L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 2 (group 1.2), L"
::= { paramEntry 727 }
sourceAudioOutMUX22R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 2 (group 1.2), R"
::= { paramEntry 728 }
sourceAudioOutMUX23L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 3 (group 2.1), L"
::= { paramEntry 729 }
sourceAudioOutMUX23R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 3 (group 2.1), R"
::= { paramEntry 730 }
sourceAudioOutMUX24L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 4 (group 2.2), L"
::= { paramEntry 731 }
sourceAudioOutMUX24R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 4 (group 2.2), R"
::= { paramEntry 732 }
sourceAudioOutMUX25L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 5 (group 3.1), L"
::= { paramEntry 733 }
sourceAudioOutMUX25R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 5 (group 3.1), R"
::= { paramEntry 734 }
sourceAudioOutMUX26L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 6 (group 3.2), L"
::= { paramEntry 735 }
sourceAudioOutMUX26R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 6 (group 3.2), R"
::= { paramEntry 736 }
sourceAudioOutMUX27L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 7 (group 4.1), L"
::= { paramEntry 737 }
sourceAudioOutMUX27R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 7 (group 4.1), R"
::= { paramEntry 738 }
sourceAudioOutMUX28L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 8 (group 4.2), L"
::= { paramEntry 739 }
sourceAudioOutMUX28R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 8 (group 4.2), R"
::= { paramEntry 740 }
sourceAudioOutMUX31L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 1 (group 1.1), L"
::= { paramEntry 741 }
sourceAudioOutMUX31R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 1 (group 1.1), R"
::= { paramEntry 742 }
sourceAudioOutMUX32L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 2 (group 1.2), L"
::= { paramEntry 743 }
sourceAudioOutMUX32R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 2 (group 1.2), R"
::= { paramEntry 744 }
sourceAudioOutMUX33L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 3 (group 2.1), L"
::= { paramEntry 745 }
sourceAudioOutMUX33R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 3 (group 2.1), R"
::= { paramEntry 746 }
sourceAudioOutMUX34L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 4 (group 2.2), L"
::= { paramEntry 747 }
sourceAudioOutMUX34R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 4 (group 2.2), R"
::= { paramEntry 748 }
sourceAudioOutMUX35L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 5 (group 3.1), L"
::= { paramEntry 749 }
sourceAudioOutMUX35R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 5 (group 3.1), R"
::= { paramEntry 750 }
sourceAudioOutMUX36L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 6 (group 3.2), L"
::= { paramEntry 751 }
sourceAudioOutMUX36R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 6 (group 3.2), R"
::= { paramEntry 752 }
sourceAudioOutMUX37L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 7 (group 4.1), L"
::= { paramEntry 753 }
sourceAudioOutMUX37R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 7 (group 4.1), R"
::= { paramEntry 754 }
sourceAudioOutMUX38L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 8 (group 4.2), L"
::= { paramEntry 755 }
sourceAudioOutMUX38R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 3, AES 8 (group 4.2), R"
::= { paramEntry 756 }
sourceAudioOutMUX41L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 1 (group 1.1), L"
::= { paramEntry 757 }
sourceAudioOutMUX41R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 1 (group 1.1), R"
::= { paramEntry 758 }
sourceAudioOutMUX42L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 2 (group 1.2), L"
::= { paramEntry 759 }
sourceAudioOutMUX42R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 2 (group 1.2), R"
::= { paramEntry 760 }
sourceAudioOutMUX43L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 3 (group 2.1), L"
::= { paramEntry 761 }
sourceAudioOutMUX43R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 3 (group 2.1), R"
::= { paramEntry 762 }
sourceAudioOutMUX44L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 4 (group 2.2), L"
::= { paramEntry 763 }
sourceAudioOutMUX44R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 4 (group 2.2), R"
::= { paramEntry 764 }
sourceAudioOutMUX45L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 5 (group 3.1), L"
::= { paramEntry 765 }
sourceAudioOutMUX45R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 5 (group 3.1), R"
::= { paramEntry 766 }
sourceAudioOutMUX46L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 6 (group 3.2), L"
::= { paramEntry 767 }
sourceAudioOutMUX46R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 6 (group 3.2), R"
::= { paramEntry 768 }
sourceAudioOutMUX47L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 7 (group 4.1), L"
::= { paramEntry 769 }
sourceAudioOutMUX47R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 7 (group 4.1), R"
::= { paramEntry 770 }
sourceAudioOutMUX48L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 8 (group 4.2), L"
::= { paramEntry 771 }
sourceAudioOutMUX48R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 4, AES 8 (group 4.2), R"
::= { paramEntry 772 }
out1EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 1"
::= { paramEntry 773 }
out1EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 1"
::= { paramEntry 774 }
out1EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 1"
::= { paramEntry 775 }
out1EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 1"
::= { paramEntry 776 }
out2EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 2"
::= { paramEntry 777 }
out2EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 2"
::= { paramEntry 778 }
out2EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 2"
::= { paramEntry 779 }
out2EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 2"
::= { paramEntry 780 }
out3EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 3"
::= { paramEntry 781 }
out3EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 3"
::= { paramEntry 782 }
out3EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 3"
::= { paramEntry 783 }
out3EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 3"
::= { paramEntry 784 }
out4EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 4"
::= { paramEntry 785 }
out4EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 4"
::= { paramEntry 786 }
out4EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 4"
::= { paramEntry 787 }
out4EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 4"
::= { paramEntry 788 }
out1StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 1"
::= { paramEntry 789 }
out1StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 1"
::= { paramEntry 790 }
out1StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 1"
::= { paramEntry 791 }
out1StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 1"
::= { paramEntry 792 }
out2StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 2"
::= { paramEntry 793 }
out2StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 2"
::= { paramEntry 794 }
out2StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 2"
::= { paramEntry 795 }
out2StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 2"
::= { paramEntry 796 }
out3StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 3"
::= { paramEntry 797 }
out3StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 3"
::= { paramEntry 798 }
out3StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 3"
::= { paramEntry 799 }
out3StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 3"
::= { paramEntry 800 }
out4StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 4"
::= { paramEntry 801 }
out4StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 4"
::= { paramEntry 802 }
out4StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 4"
::= { paramEntry 803 }
out4StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 4"
::= { paramEntry 804 }
out1DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 805 }
out1DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 806 }
out1DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 807 }
out1DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 808 }
out2DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 809 }
out2DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 810 }
out2DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 811 }
out2DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 812 }
out3DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 813 }
out3DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 814 }
out3DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 815 }
out3DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 3"
::= { paramEntry 816 }
out4DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 4"
::= { paramEntry 817 }
out4DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 4"
::= { paramEntry 818 }
out4DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 4"
::= { paramEntry 819 }
out4DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 4"
::= { paramEntry 820 }
temperatureMAX1617Int OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PCB temperature (MAX1617) in C"
::= { paramEntry 823 }
temperatureMAX1617Ext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FPGA temperature in C"
::= { paramEntry 824 }
audioDelayAESIn1 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 1"
::= { paramEntry 825 }
audioDelayAESIn2 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 2"
::= { paramEntry 826 }
audioDelayAESIn3 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 3"
::= { paramEntry 827 }
audioDelayAESIn4 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 4"
::= { paramEntry 828 }
audioDelayAESOut1 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 1"
::= { paramEntry 829 }
audioDelayAESOut2 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 2"
::= { paramEntry 830 }
audioDelayAESOut3 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 3"
::= { paramEntry 831 }
audioDelayAESOut4 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 4"
::= { paramEntry 832 }
audioDelaySDI11 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 11"
::= { paramEntry 833 }
audioDelaySDI12 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 12"
::= { paramEntry 834 }
audioDelaySDI13 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 13"
::= { paramEntry 835 }
audioDelaySDI14 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 14"
::= { paramEntry 836 }
audioDelaySDI15 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 15"
::= { paramEntry 837 }
audioDelaySDI16 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 16"
::= { paramEntry 838 }
audioDelaySDI17 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 17"
::= { paramEntry 839 }
audioDelaySDI18 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 18"
::= { paramEntry 840 }
audioDelaySDI21 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 21"
::= { paramEntry 841 }
audioDelaySDI22 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 22"
::= { paramEntry 842 }
audioDelaySDI23 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 23"
::= { paramEntry 843 }
audioDelaySDI24 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 24"
::= { paramEntry 844 }
audioDelaySDI25 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 25"
::= { paramEntry 845 }
audioDelaySDI26 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 26"
::= { paramEntry 846 }
audioDelaySDI27 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 27"
::= { paramEntry 847 }
audioDelaySDI28 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 28"
::= { paramEntry 848 }
audioDelaySDIOut11 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 11"
::= { paramEntry 849 }
audioDelaySDIOut12 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 12"
::= { paramEntry 850 }
audioDelaySDIOut13 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 13"
::= { paramEntry 851 }
audioDelaySDIOut14 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 14"
::= { paramEntry 852 }
audioDelaySDIOut15 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 15"
::= { paramEntry 853 }
audioDelaySDIOut16 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 16"
::= { paramEntry 854 }
audioDelaySDIOut17 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 17"
::= { paramEntry 855 }
audioDelaySDIOut18 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 18"
::= { paramEntry 856 }
audioDelaySDIOut21 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 21"
::= { paramEntry 857 }
audioDelaySDIOut22 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 22"
::= { paramEntry 858 }
audioDelaySDIOut23 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 23"
::= { paramEntry 859 }
audioDelaySDIOut24 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 24"
::= { paramEntry 860 }
audioDelaySDIOut25 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 25"
::= { paramEntry 861 }
audioDelaySDIOut26 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 26"
::= { paramEntry 862 }
audioDelaySDIOut27 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 27"
::= { paramEntry 863 }
audioDelaySDIOut28 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 28"
::= { paramEntry 864 }
audioDelaySDIOut31 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 31"
::= { paramEntry 865 }
audioDelaySDIOut32 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 32"
::= { paramEntry 866 }
audioDelaySDIOut33 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 33"
::= { paramEntry 867 }
audioDelaySDIOut34 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 34"
::= { paramEntry 868 }
audioDelaySDIOut35 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 35"
::= { paramEntry 869 }
audioDelaySDIOut36 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 36"
::= { paramEntry 870 }
audioDelaySDIOut37 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 37"
::= { paramEntry 871 }
audioDelaySDIOut38 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 38"
::= { paramEntry 872 }
audioDelaySDIOut41 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 41"
::= { paramEntry 873 }
audioDelaySDIOut42 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 42"
::= { paramEntry 874 }
audioDelaySDIOut43 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 43"
::= { paramEntry 875 }
audioDelaySDIOut44 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 44"
::= { paramEntry 876 }
audioDelaySDIOut45 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 45"
::= { paramEntry 877 }
audioDelaySDIOut46 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 46"
::= { paramEntry 878 }
audioDelaySDIOut47 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 47"
::= { paramEntry 879 }
audioDelaySDIOut48 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 48"
::= { paramEntry 880 }
videoDelayTracking OBJECT-TYPE
SYNTAX TypeVideoDelayTracking
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alignment of the audiodelay to the SDI-Out(1-4) Videosignal"
::= { paramEntry 881 }
delayPulseAssign OBJECT-TYPE
SYNTAX TypeDelayPulseAssign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign the Delay Pulse Output to one of the SDI Outputs.
The generated Delay Pulse will represent the exact amount of time that the video signal on this output has been delayed from SDI-Input to SDI-Output."
::= { paramEntry 882 }
deembPhaseSync1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
All running channels are reset if one channel is added/removed.
(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)
If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
::= { paramEntry 883 }
deembPhaseSyncVerify1 OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
::= { paramEntry 884 }
deembPhaseSync2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
All running channels are reset if one channel is added/removed.
(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)
If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
::= { paramEntry 885 }
deembPhaseSyncVerify2 OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
::= { paramEntry 886 }
presetsGPIOn OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 887 }
presetsGPIOff OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 888 }
genLockStatus OBJECT-TYPE
SYNTAX TypeGenLockStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lock-Status of LMH1982"
::= { paramEntry 889 }
inputToRefDelay1H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Horizontal delay between Input 1 and Reference"
::= { paramEntry 890 }
inputToRefDelay1V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Vertical delay between Input 1 and Reference"
::= { paramEntry 891 }
inputToRefDelay2H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Horizontal delay between Input 2 and Reference"
::= { paramEntry 892 }
inputToRefDelay2V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Vertical delay between Input 2 and Reference"
::= { paramEntry 893 }
audioContentSDI11 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.1"
::= { paramEntry 894 }
audioContentSDI12 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.2"
::= { paramEntry 895 }
audioContentSDI13 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.3"
::= { paramEntry 896 }
audioContentSDI14 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.4"
::= { paramEntry 897 }
audioContentSDI15 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.5"
::= { paramEntry 898 }
audioContentSDI16 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.6"
::= { paramEntry 899 }
audioContentSDI17 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.7"
::= { paramEntry 900 }
audioContentSDI18 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.8"
::= { paramEntry 901 }
audioContentSDI21 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.1"
::= { paramEntry 902 }
audioContentSDI22 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.2"
::= { paramEntry 903 }
audioContentSDI23 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.3"
::= { paramEntry 904 }
audioContentSDI24 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.4"
::= { paramEntry 905 }
audioContentSDI25 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.5"
::= { paramEntry 906 }
audioContentSDI26 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.6"
::= { paramEntry 907 }
audioContentSDI27 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.7"
::= { paramEntry 908 }
audioContentSDI28 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.8"
::= { paramEntry 909 }
audioContentStatusSDI11 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.1"
::= { paramEntry 910 }
audioContentStatusSDI12 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.2"
::= { paramEntry 911 }
audioContentStatusSDI13 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.3"
::= { paramEntry 912 }
audioContentStatusSDI14 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.4"
::= { paramEntry 913 }
audioContentStatusSDI15 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.5"
::= { paramEntry 914 }
audioContentStatusSDI16 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.6"
::= { paramEntry 915 }
audioContentStatusSDI17 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.7"
::= { paramEntry 916 }
audioContentStatusSDI18 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.8"
::= { paramEntry 917 }
audioContentStatusSDI21 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.1"
::= { paramEntry 918 }
audioContentStatusSDI22 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.2"
::= { paramEntry 919 }
audioContentStatusSDI23 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.3"
::= { paramEntry 920 }
audioContentStatusSDI24 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.4"
::= { paramEntry 921 }
audioContentStatusSDI25 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.5"
::= { paramEntry 922 }
audioContentStatusSDI26 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.6"
::= { paramEntry 923 }
audioContentStatusSDI27 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.7"
::= { paramEntry 924 }
audioContentStatusSDI28 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.8"
::= { paramEntry 925 }
audioContentAES1 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 1"
::= { paramEntry 926 }
audioContentAES2 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 2"
::= { paramEntry 927 }
audioContentAES3 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 3"
::= { paramEntry 928 }
audioContentAES4 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 4"
::= { paramEntry 929 }
audioContentStatusAES1 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 1"
::= { paramEntry 930 }
audioContentStatusAES2 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 2"
::= { paramEntry 931 }
audioContentStatusAES3 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 3"
::= { paramEntry 932 }
audioContentStatusAES4 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 4"
::= { paramEntry 933 }
out1MetaLineSelectionMode OBJECT-TYPE
SYNTAX TypeConv1MetaTXTLinesSelectionMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify mode of operation for selecting ANC-lines for insertion of MetaData into Output 1. By default (automatic) the selections will be chosen according to appropriate standard recommendations. In manual mode, you are fully responsible for compliance with the current video standard."
::= { paramEntry 934 }
out1MetaS352Insertion OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of SMPTE 352 (VPID) at Output 1"
::= { paramEntry 935 }
out1MetaAFDLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of AFD data packet into Output 1"
::= { paramEntry 936 }
out1MetaCCCDPLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into Output 1"
::= { paramEntry 937 }
out1MetaCCRAWLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) into Output 1"
::= { paramEntry 938 }
out1MetaS2020Line OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of SMPTE2020 data packets into Output 1"
::= { paramEntry 939 }
out1MetaS2031WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of SMPTE2031 WST (teletext) data packets into Output 1. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 940 }
out1MetaOP47WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of OP47 WST (teletext) data packets into Output 1. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 941 }
out1MetaATCLTCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-LTC data packets into Output 1"
::= { paramEntry 942 }
out1MetaATCVITCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-VITC data packets into Output 1"
::= { paramEntry 943 }
out1MetaATCLTCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-LTC data packets are inserted as HANC or VANC packets at Output 1"
::= { paramEntry 944 }
out1MetaATCVITCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-VITC data packets are inserted as HANC or VANC packets at Output 1"
::= { paramEntry 945 }
out2MetaLineSelectionMode OBJECT-TYPE
SYNTAX TypeConv1MetaTXTLinesSelectionMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify mode of operation for selecting ANC-lines for insertion of MetaData into Output 2. By default (automatic) the selections will be chosen according to appropriate standard recommendations. In manual mode, you are fully responsible for compliance with the current video standard."
::= { paramEntry 947 }
out2MetaS352Insertion OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of SMPTE 352 (VPID) at Output 2"
::= { paramEntry 948 }
out2MetaAFDLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of AFD data packet into Output 2"
::= { paramEntry 949 }
out2MetaCCCDPLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into Output 2"
::= { paramEntry 950 }
out2MetaCCRAWLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) into Output 2"
::= { paramEntry 951 }
out2MetaS2020Line OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of SMPTE2020 data packets into Output 2"
::= { paramEntry 952 }
out2MetaS2031WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of SMPTE2031 WST (teletext) data packets into Output 2. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 953 }
out2MetaOP47WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of OP47 WST (teletext) data packets into Output 2. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 954 }
out2MetaATCLTCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-LTC data packets into Output 2"
::= { paramEntry 955 }
out2MetaATCVITCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-VITC data packets into Output 2"
::= { paramEntry 956 }
out2MetaATCLTCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-LTC data packets are inserted as HANC or VANC packets at Output 2"
::= { paramEntry 957 }
out2MetaATCVITCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-VITC data packets are inserted as HANC or VANC packets at Output 2"
::= { paramEntry 958 }
out3MetaLineSelectionMode OBJECT-TYPE
SYNTAX TypeConv1MetaTXTLinesSelectionMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify mode of operation for selecting ANC-lines for insertion of MetaData into Output 3. By default (automatic) the selections will be chosen according to appropriate standard recommendations. In manual mode, you are fully responsible for compliance with the current video standard."
::= { paramEntry 960 }
out3MetaS352Insertion OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of SMPTE 352 (VPID) at Output 3"
::= { paramEntry 961 }
out3MetaAFDLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of AFD data packet into Output 3"
::= { paramEntry 962 }
out3MetaCCCDPLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into Output 3"
::= { paramEntry 963 }
out3MetaCCRAWLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) into Output 3"
::= { paramEntry 964 }
out3MetaS2020Line OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of SMPTE2020 data packets into Output 3"
::= { paramEntry 965 }
out3MetaS2031WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of SMPTE2031 WST (teletext) data packets into Output 3. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 966 }
out3MetaOP47WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of OP47 WST (teletext) data packets into Output 3. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 967 }
out3MetaATCLTCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-LTC data packets into Output 3"
::= { paramEntry 968 }
out3MetaATCVITCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-VITC data packets into Output 3"
::= { paramEntry 969 }
out3MetaATCLTCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-LTC data packets are inserted as HANC or VANC packets at Output 3"
::= { paramEntry 970 }
out3MetaATCVITCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-VITC data packets are inserted as HANC or VANC packets at Output 3"
::= { paramEntry 971 }
out4MetaLineSelectionMode OBJECT-TYPE
SYNTAX TypeConv1MetaTXTLinesSelectionMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify mode of operation for selecting ANC-lines for insertion of MetaData into Output 4. By default (automatic) the selections will be chosen according to appropriate standard recommendations. In manual mode, you are fully responsible for compliance with the current video standard."
::= { paramEntry 973 }
out4MetaS352Insertion OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of SMPTE 352 (VPID) at Output 4"
::= { paramEntry 974 }
out4MetaAFDLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of AFD data packet into Output 4"
::= { paramEntry 975 }
out4MetaCCCDPLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into Output 4"
::= { paramEntry 976 }
out4MetaCCRAWLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) into Output 4"
::= { paramEntry 977 }
out4MetaS2020Line OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of SMPTE2020 data packets into Output 4"
::= { paramEntry 978 }
out4MetaS2031WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of SMPTE2031 WST (teletext) data packets into Output 4. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 979 }
out4MetaOP47WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of OP47 WST (teletext) data packets into Output 4. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 980 }
out4MetaATCLTCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-LTC data packets into Output 4"
::= { paramEntry 981 }
out4MetaATCVITCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-VITC data packets into Output 4"
::= { paramEntry 982 }
out4MetaATCLTCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-LTC data packets are inserted as HANC or VANC packets at Output 4"
::= { paramEntry 983 }
out4MetaATCVITCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-VITC data packets are inserted as HANC or VANC packets at Output 4"
::= { paramEntry 984 }
sDIIn1StatusAFD OBJECT-TYPE
SYNTAX TypeSDIIn1StatusAFD
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected AFD code on SDI input 1"
::= { paramEntry 986 }
sDIIn1StatusWSS OBJECT-TYPE
SYNTAX TypeSDIIn1StatusWSS
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected WSS code on SDI input 1"
::= { paramEntry 987 }
sDIIn1StatusVI OBJECT-TYPE
SYNTAX TypeSDIIn1StatusVI
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected VI code on SDI input 1"
::= { paramEntry 988 }
sDIIn1AFDLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of AFD data packet on SDI input 1"
::= { paramEntry 989 }
sDIIn1CCCDPLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) on SDI input 1"
::= { paramEntry 990 }
sDIIn1CCRAWLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) on SDI input 1"
::= { paramEntry 991 }
sDIIn1S2020Line OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of SMPTE2020 data packets on SDI input 1"
::= { paramEntry 992 }
sDIIn1S2031WSTFirstLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection first video line of SMPTE2031 WST (teletext) data packets on SDI input 1."
::= { paramEntry 993 }
sDIIn1S2031WSTLastLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection last video line of SMPTE2031 WST (teletext) data packets on SDI input 1."
::= { paramEntry 994 }
sDIIn1OP47WSTFirstLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection first video line of OP47 WST (teletext) data packets on SDI input 1"
::= { paramEntry 995 }
sDIIn1OP47WSTLastLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection last video line of OP47 WST (teletext) data packets on SDI input 1"
::= { paramEntry 996 }
sDIIn1ATCLTCLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of ATC-LTC data packets on SDI input 1"
::= { paramEntry 997 }
sDIIn1ATCVITCLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of ATC-VITC data packets on SDI input 1"
::= { paramEntry 998 }
sDIIn1ATCLTCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection if ATC-LTC data packets are present as HANC or VANC packets on SDI input 1"
::= { paramEntry 999 }
sDIIn1ATCVITCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection if ATC-VITC data packets are present as HANC or VANC packets on SDI input 1"
::= { paramEntry 1000 }
sDIIn1StatusFormatReactOnChange OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to CHANGE of format description (AFD, WSS, VI) in SDI Input 1 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable."
::= { paramEntry 1002 }
sDIIn1StatusFormatReactOnLoss OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to LOSS of format description (AFD, WSS, VI) in SDI Input 1 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable"
::= { paramEntry 1003 }
sDIIn2StatusAFD OBJECT-TYPE
SYNTAX TypeSDIIn1StatusAFD
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected AFD code on SDI input 2"
::= { paramEntry 1004 }
sDIIn2StatusWSS OBJECT-TYPE
SYNTAX TypeSDIIn1StatusWSS
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected WSS code on SDI input 2"
::= { paramEntry 1005 }
sDIIn2StatusVI OBJECT-TYPE
SYNTAX TypeSDIIn1StatusVI
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected VI code on SDI input 2"
::= { paramEntry 1006 }
sDIIn2AFDLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of AFD data packet on SDI input 2"
::= { paramEntry 1007 }
sDIIn2CCCDPLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) on SDI input 2"
::= { paramEntry 1008 }
sDIIn2CCRAWLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) on SDI input 2"
::= { paramEntry 1009 }
sDIIn2S2020Line OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of SMPTE2020 data packets on SDI input 2"
::= { paramEntry 1010 }
sDIIn2S2031WSTFirstLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection first video line of SMPTE2031 WST (teletext) data packets on SDI input 2."
::= { paramEntry 1011 }
sDIIn2S2031WSTLastLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection last video line of SMPTE2031 WST (teletext) data packets on SDI input 2."
::= { paramEntry 1012 }
sDIIn2OP47WSTFirstLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection first video line of OP47 WST (teletext) data packets on SDI input 2"
::= { paramEntry 1013 }
sDIIn2OP47WSTLastLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection last video line of OP47 WST (teletext) data packets on SDI input 2"
::= { paramEntry 1014 }
sDIIn2ATCLTCLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of ATC-LTC data packets on SDI input 2"
::= { paramEntry 1015 }
sDIIn2ATCVITCLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of ATC-VITC data packets on SDI input 2"
::= { paramEntry 1016 }
sDIIn2ATCLTCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection if ATC-LTC data packets are present as HANC or VANC packets on SDI input 2"
::= { paramEntry 1017 }
sDIIn2ATCVITCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection if ATC-VITC data packets are present as HANC or VANC packets on SDI input 2"
::= { paramEntry 1018 }
sDIIn2StatusFormatReactOnChange OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to CHANGE of format description (AFD, WSS, VI) in SDI Input 2 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable."
::= { paramEntry 1020 }
sDIIn2StatusFormatReactOnLoss OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to LOSS of format description (AFD, WSS, VI) in SDI Input 2 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable"
::= { paramEntry 1021 }
snapToReferenceFrameLength OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to ON, the minimum total video processing time is set to be equal to the length of one video-frame of the reference standard. E.g. synchronizing a 720p50 SDI to a 625 REF will delay the SDI by minimum 40ms (instead of 20ms).This mode can only be used with synchronous SDI inputs.The default value is OFF."
::= { paramEntry 1022 }
out1ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 1023 }
out2ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 1024 }
out3ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 1025 }
out4ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 1026 }
out1FixedProcTime OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: Set the video processing time to a fixed value, independent of the current mode of operation"
::= { paramEntry 1027 }
out2FixedProcTime OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: Set the video processing time to a fixed value, independent of the current mode of operation"
::= { paramEntry 1028 }
out3FixedProcTime OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: Set the video processing time to a fixed value, independent of the current mode of operation"
::= { paramEntry 1029 }
out4FixedProcTime OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: Set the video processing time to a fixed value, independent of the current mode of operation"
::= { paramEntry 1030 }
out1DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 1"
::= { paramEntry 1031 }
out2DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 2"
::= { paramEntry 1032 }
out3DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 3"
::= { paramEntry 1033 }
out4DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 4"
::= { paramEntry 1034 }
out1FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: specify freeze mode if input is missing."
::= { paramEntry 1035 }
out2FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: specify freeze mode if input is missing."
::= { paramEntry 1036 }
out3FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 3: specify freeze mode if input is missing."
::= { paramEntry 1037 }
out4FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 4: specify freeze mode if input is missing."
::= { paramEntry 1038 }
audioDolbyETiming1 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 1039 }
audioDolbyETiming2 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 1040 }
audioDolbyETiming3 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 1041 }
audioDolbyETiming4 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 1042 }
conv3COCOGainG OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gain adjustment for GREEN channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 1043 }
conv3COCOGainB OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gain adjustment for BLUE channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 1044 }
conv3COCOGainR OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gain adjustment for RED channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 1045 }
conv3COCOOffsetG OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Offset adjustment for GREEN channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 1046 }
conv3COCOOffsetB OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Offset adjustment for BLUE channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 1047 }
conv3COCOOffsetR OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Offset adjustment for RED channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 1048 }
conv3COCOGangGains OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all color correction gain values (modify all gain controls synchronously)"
::= { paramEntry 1049 }
conv3COCOGangOffsets OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all color correction offset values
(modify all offset controls synchronously)"
::= { paramEntry 1050 }
conv3COCOMode OBJECT-TYPE
SYNTAX TypeConv3COCOMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify operation mode for the ColorCorrection stage in the LYNX HiQ Scaler.
- Gain & Offset (default) : Offset is applied as linear addition to the signal
- Peak & Black: Black Adjustment is applied to signal non-linearily. This avoids overlevels resp. clipping."
::= { paramEntry 1051 }
out1TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 1"
::= { paramEntry 1052 }
out2TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 2"
::= { paramEntry 1053 }
out3TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 3"
::= { paramEntry 1054 }
out4TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 4"
::= { paramEntry 1055 }
sDIIn1SourceType OBJECT-TYPE
SYNTAX TypeSDIIn1SourceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for SDI input 1 from electrical or optical connector"
::= { paramEntry 1056 }
aSCA OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This function will take control over all internal audio crossbars and embedders.
For all incoming audio streams, it will automatically select the appropriate synchronization method according to their content (PCM-audio, DolbyE, other non-PCM data). Audio-Outputs will be routed so they contain the same audio content as the input.
See user-manual for further details."
::= { paramEntry 1057 }
aSCAResourceAssign OBJECT-TYPE
SYNTAX TypeASCAResourceAssign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign audio synchronization resources (SRC and DE-FS) to audio streams by SDI input.
In shared mode, the available sync-resources are shared equally, both sources have access to half of them. Otherwise, all available sync-resources are available to the audio content from one SDI, while the audio content from the other SDI has to remain un-synchronized.
The sync-resources (Sample rate converters and DolbyE frame synchronizers) cannot be shared dynamically. This prevents from possible cross-channel disturbances."
::= { paramEntry 1058 }
presetsNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "maximum number of user presets"
::= { paramEntry 1060 }
presetsActive OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select the Active Preset.
NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka Current) and make the required modifications there."
::= { paramEntry 1061 }
presetsSaveAs OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
::= { paramEntry 1062 }
presetsLoadToCurrent OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "loads selected user preset into the current user settings, all actual user changes will be lost"
::= { paramEntry 1063 }
presetsName0 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 0"
::= { paramEntry 1064 }
presetsName1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 1"
::= { paramEntry 1065 }
presetsName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 2"
::= { paramEntry 1066 }
presetsName3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 3"
::= { paramEntry 1067 }
presetsName4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 4"
::= { paramEntry 1068 }
presetsName5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 5"
::= { paramEntry 1069 }
presetsName6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 6"
::= { paramEntry 1070 }
presetsName7 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 7"
::= { paramEntry 1071 }
out1FrameSyncCompensation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Frame Sync Compensation"
::= { paramEntry 1072 }
boardID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "BoardID"
::= { paramEntry 1084 }
audioDelayAESOutGang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all AES Out Delay values (modify all delay controls synchronously)"
::= { paramEntry 1090 }
audioDelaySDIOut1Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 1 Delay values (modify all delay controls synchronously)"
::= { paramEntry 1091 }
audioDelaySDIOut2Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 2 Delay values (modify all delay controls synchronously)"
::= { paramEntry 1092 }
audioDelaySDIOut3Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 3 Delay values (modify all delay controls synchronously)"
::= { paramEntry 1093 }
audioDelaySDIOut4Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 4 Delay values (modify all delay controls synchronously)"
::= { paramEntry 1094 }
eventReferenceNoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Reference No Input"
::= { paramEntry 1095 }
eventSDIInput1NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: SDI Input 1 No Input"
::= { paramEntry 1096 }
eventSDIInput2NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: SDI Input 2 No Input"
::= { paramEntry 1097 }
eventFanFailureSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Fan Failure"
::= { paramEntry 1098 }
eventHighTemperatureSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: High Temperature"
::= { paramEntry 1099 }
eventCouldnotlocktoSDIInput1SNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to SDI Input 1"
::= { paramEntry 1100 }
eventCouldnotlocktoSDIInput2SNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to SDI Input 2"
::= { paramEntry 1101 }
eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to Reference"
::= { paramEntry 1102 }
eventAESInput1NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 1 No Input"
::= { paramEntry 1103 }
eventAESInput2NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 2 No Input"
::= { paramEntry 1104 }
eventAESInput3NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 3 No Input"
::= { paramEntry 1105 }
eventAESInput4NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 4 No Input"
::= { paramEntry 1106 }
eventAESInput1asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 1 asynchronous"
::= { paramEntry 1107 }
eventAESInput2asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 2 asynchronous"
::= { paramEntry 1108 }
eventAESInput3asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 3 asynchronous"
::= { paramEntry 1109 }
eventAESInput4asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 4 asynchronous"
::= { paramEntry 1110 }
conv1InputStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 1"
::= { paramEntry 1111 }
conv2InputStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 2"
::= { paramEntry 1112 }
conv3InputStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 3"
::= { paramEntry 1113 }
crossBarAudioIntern OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Mono Crossbar for Internal Audio AES Streams"
::= { paramEntry 1116 }
crossBarAudioOutMUX1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 1"
::= { paramEntry 1117 }
crossBarAudioOutMUX2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 2"
::= { paramEntry 1118 }
crossBarAudioOutMUX3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 3"
::= { paramEntry 1119 }
crossBarAudioOutMUX4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 4"
::= { paramEntry 1120 }
crossBarAudioOutExtAES OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for External Audio Out AES"
::= { paramEntry 1121 }
conv3InSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Conv 3 Input Image Size (pixels)"
::= { paramEntry 1122 }
conv3OutSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Conv 3 Output Image Size (pixels)"
::= { paramEntry 1123 }
sNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial Number"
::= { paramEntry 1124 }
-- Parameter table
paramTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PVD5660-BO-DO-DOW parameters"
::= { sw402 1 }
paramEntry OBJECT-TYPE
SYNTAX ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row in the table of PVD5660-BO-DO-DOW parameters"
INDEX { IMPLIED position }
::= { paramTable 1 }
ParamEntry ::= SEQUENCE {
typeName DisplayString,
displayName DisplayString,
position OCTET STRING,
uptime TimeTicks,
type DisplayString,
version DisplayString,
statusColor TypeStatusColor,
statusColorRGB DisplayString,
statusText DisplayString,
factoryReset TypeFactoryReset,
lock OnOffValue,
locate OnOffValue,
eventReferenceNoInput OnOffValue,
eventSDIInput1NoInput OnOffValue,
eventSDIInput2NoInput OnOffValue,
eventFanFailure OnOffValue,
eventHighTemperature OnOffValue,
eventCouldnotlocktoSDIInput1 OnOffValue,
eventCouldnotlocktoSDIInput2 OnOffValue,
eventCouldnotlocktoReference OnOffValue,
eventAESInput1NoInput OnOffValue,
eventAESInput2NoInput OnOffValue,
eventAESInput3NoInput OnOffValue,
eventAESInput4NoInput OnOffValue,
eventAESInput1asynchronous OnOffValue,
eventAESInput2asynchronous OnOffValue,
eventAESInput3asynchronous OnOffValue,
eventAESInput4asynchronous OnOffValue,
channel2CoupleTo1 OnOffValue,
channel3CoupleTo1 OnOffValue,
channel4CoupleTo1 OnOffValue,
referenceLock TypeReferenceLock,
referenceStatus TypeReferenceStatus,
referenceSource TypeReferenceSource,
freqPreselect TypeFreqPreselect,
freq TypeFreq,
gPIFunc TypeGPIFunc,
syncMode1 TypeSyncMode1,
inputStatusSDI1 TypeReferenceStatus,
inputFreezeSDI1 TypeInputFreezeSDI1,
syncSDIIn1 OnOffValue,
syncMode2 TypeSyncMode1,
inputStatusSDI2 TypeReferenceStatus,
inputFreezeSDI2 TypeInputFreezeSDI1,
syncSDIIn2 OnOffValue,
conv1Source TypeConv1Source,
conv1ControlMode TypeConv1ControlMode,
conv1AspectInSelect TypeConv1AspectInSelect,
conv1AspectIn TypeConv1AspectIn,
conv1FormatOut TypeConv1FormatOut,
conv1StatusOut TypeConv1StatusOut,
conv1Mode TypeConv1Mode,
conv1OutInsertAFD OnOffValue,
conv1OutInsertVI OnOffValue,
conv1OutInsertWSS OnOffValue,
conv1StatusIn TypeConv1StatusOut,
conv2Source TypeConv1Source,
conv2ControlMode TypeConv1ControlMode,
conv2AspectInSelect TypeConv1AspectInSelect,
conv2AspectIn TypeConv1AspectIn,
conv2FormatOut TypeConv1FormatOut,
conv2StatusOut TypeConv1StatusOut,
conv2Mode TypeConv1Mode,
conv2OutInsertAFD OnOffValue,
conv2OutInsertVI OnOffValue,
conv2OutInsertWSS OnOffValue,
conv2StatusIn TypeConv1StatusOut,
conv3Source TypeConv1Source,
conv3ControlMode TypeConv1ControlMode,
conv3AspectInSelect TypeConv1AspectIn,
conv3AspectIn TypeConv1AspectIn,
conv3FormatOut TypeConv3FormatOut,
conv3StatusOut TypeConv1StatusOut,
conv3Mode TypeConv3Mode,
conv3AdvancedSettings OnOffValue,
conv3OutInsertAFD OnOffValue,
conv3OutInsertVI OnOffValue,
conv3OutInsertWSS OnOffValue,
conv3StatusIn TypeConv1StatusOut,
conv3CropHpos Integer32,
conv3CropVpos Integer32,
conv3CropHsize Integer32,
conv3CropVsize Integer32,
conv3InsertHpos Integer32,
conv3InsertVpos Integer32,
conv3InsertHsize Integer32,
conv3InsertVsize Integer32,
conv3MotionAdaptive OnOffValue,
conv3NRGeneral Integer32,
conv3NRBlockArtifact Integer32,
conv3NRMosquito Integer32,
conv3DetailLevel Integer32,
conv3DetailThreshold Integer32,
conv1MetaAdvancedSettings OnOffValue,
conv1MetaCCSourceDefaultPriorities OnOffValue,
conv1MetaTCSourceDefaultPriorities OnOffValue,
conv1MetaAFDInStatus TypeConv1MetaAFDInStatus,
conv1MetaVIInStatus TypeConv1MetaAFDInStatus,
conv1MetaWSSInStatus TypeConv1MetaAFDInStatus,
conv1MetaCCCDPOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaCCCDPInStatus TypeConv1MetaAFDInStatus,
conv1MetaCCCDPInsertion OnOffValue,
conv1MetaCCCDPSourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv1MetaCCCDPSourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaCCCDPSourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaCCRAWOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaCCRAWInStatus TypeConv1MetaAFDInStatus,
conv1MetaCCRAWInsertion OnOffValue,
conv1MetaCCRAWSourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv1MetaCCRAWSourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaCCRAWSourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaCCL21OutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaCCL21InStatus TypeConv1MetaAFDInStatus,
conv1MetaCCL21Insertion OnOffValue,
conv1MetaCCL21SourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv1MetaCCL21SourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaCCL21SourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv1MetaTCLTCInStatus TypeConv1MetaAFDInStatus,
conv1MetaTCLTCInsertion OnOffValue,
conv1MetaTCLTCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv1MetaTCLTCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCLTCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCVITCInStatus TypeConv1MetaAFDInStatus,
conv1MetaTCVITCInsertion OnOffValue,
conv1MetaTCVITCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv1MetaTCVITCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCVITCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCDVITCInStatus TypeConv1MetaTCDVITCInStatus,
conv1MetaTCDVITCInsertion OnOffValue,
conv1MetaTCDVITCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv1MetaTCDVITCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCDVITCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv1MetaTCLTCOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaTCVITCOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaTCDVITCAOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaTCDVITCBOutStatus TypeConv1MetaCCCDPOutStatus,
conv1MetaTCDVITCADestination625 TypeConv1MetaTCDVITCADestination625,
conv1MetaTCDVITCBDestination625 TypeConv1MetaTCDVITCADestination625,
conv1MetaTCDVITCADestination525 TypeConv1MetaTCDVITCADestination625,
conv1MetaTCDVITCBDestination525 TypeConv1MetaTCDVITCADestination625,
conv1MetaTCDVITCADetectedSrcLine Integer32,
conv1MetaTCDVITCBDetectedSrcLine Integer32,
conv1MetaTCVITCDetectedDVITCLine Integer32,
conv1MetaTCDVITCAutomatic OnOffValue,
conv1MetaTXTWSTInStatus TypeConv1MetaAFDInStatus,
conv1MetaTXTS2031InStatus TypeConv1MetaAFDInStatus,
conv1MetaTXTOP47InStatus TypeConv1MetaAFDInStatus,
conv1MetaTXTEncoderMode TypeConv1MetaTXTEncoderMode,
conv1MetaTXTLinesSelectionMode TypeConv1MetaTXTLinesSelectionMode,
conv1MetaField1Overflow TypeConv1MetaField1Overflow,
conv1MetaField2Overflow TypeConv1MetaField1Overflow,
conv1MetaSMPTE2020Status TypeConv1MetaSMPTE2020Status,
conv1MetaSMPTE2020Insertion OnOffValue,
conv1ModeAutoARto169 TypeConv1ModeAutoARto169,
conv1ModeAutoARto43 TypeConv1ModeAutoARto169,
conv1InsertAFDFullFrame169 TypeConv1InsertAFDFullFrame169,
conv1ModeAutoFallback TypeConv1ModeAutoFallback,
conv2MetaAdvancedSettings OnOffValue,
conv2MetaCCSourceDefaultPriorities OnOffValue,
conv2MetaTCSourceDefaultPriorities OnOffValue,
conv2MetaAFDInStatus TypeConv1MetaAFDInStatus,
conv2MetaVIInStatus TypeConv1MetaAFDInStatus,
conv2MetaWSSInStatus TypeConv1MetaAFDInStatus,
conv2MetaCCCDPOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaCCCDPInStatus TypeConv1MetaAFDInStatus,
conv2MetaCCCDPInsertion OnOffValue,
conv2MetaCCCDPSourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv2MetaCCCDPSourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaCCCDPSourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaCCRAWOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaCCRAWInStatus TypeConv1MetaAFDInStatus,
conv2MetaCCRAWInsertion OnOffValue,
conv2MetaCCRAWSourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv2MetaCCRAWSourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaCCRAWSourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaCCL21OutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaCCL21InStatus TypeConv1MetaAFDInStatus,
conv2MetaCCL21Insertion OnOffValue,
conv2MetaCCL21SourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv2MetaCCL21SourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaCCL21SourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv2MetaTCLTCInStatus TypeConv1MetaAFDInStatus,
conv2MetaTCLTCInsertion OnOffValue,
conv2MetaTCLTCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv2MetaTCLTCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCLTCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCVITCInStatus TypeConv1MetaAFDInStatus,
conv2MetaTCVITCInsertion OnOffValue,
conv2MetaTCVITCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv2MetaTCVITCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCVITCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCDVITCInStatus TypeConv1MetaTCDVITCInStatus,
conv2MetaTCDVITCInsertion OnOffValue,
conv2MetaTCDVITCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv2MetaTCDVITCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCDVITCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv2MetaTCLTCOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaTCVITCOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaTCDVITCAOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaTCDVITCBOutStatus TypeConv1MetaCCCDPOutStatus,
conv2MetaTCDVITCADestination625 TypeConv1MetaTCDVITCADestination625,
conv2MetaTCDVITCBDestination625 TypeConv1MetaTCDVITCADestination625,
conv2MetaTCDVITCADestination525 TypeConv1MetaTCDVITCADestination625,
conv2MetaTCDVITCBDestination525 TypeConv1MetaTCDVITCADestination625,
conv2MetaTCDVITCADetectedSrcLine Integer32,
conv2MetaTCDVITCBDetectedSrcLine Integer32,
conv2MetaTCVITCDetectedDVITCLine Integer32,
conv2MetaTCDVITCAutomatic OnOffValue,
conv2MetaTXTWSTInStatus TypeConv1MetaAFDInStatus,
conv2MetaTXTS2031InStatus TypeConv1MetaAFDInStatus,
conv2MetaTXTOP47InStatus TypeConv1MetaAFDInStatus,
conv2MetaTXTEncoderMode TypeConv1MetaTXTEncoderMode,
conv2MetaTXTLinesSelectionMode TypeConv1MetaTXTLinesSelectionMode,
conv2MetaField1Overflow TypeConv1MetaField1Overflow,
conv2MetaField2Overflow TypeConv1MetaField1Overflow,
conv2MetaSMPTE2020Status TypeConv1MetaSMPTE2020Status,
conv2MetaSMPTE2020Insertion OnOffValue,
conv2ModeAutoARto169 TypeConv1ModeAutoARto169,
conv2ModeAutoARto43 TypeConv1ModeAutoARto169,
conv2InsertAFDFullFrame169 TypeConv1InsertAFDFullFrame169,
conv2ModeAutoFallback TypeConv1ModeAutoFallback,
conv3MetaAdvancedSettings OnOffValue,
conv3MetaCCSourceDefaultPriorities OnOffValue,
conv3MetaTCSourceDefaultPriorities OnOffValue,
conv3MetaAFDInStatus TypeConv1MetaAFDInStatus,
conv3MetaVIInStatus TypeConv1MetaAFDInStatus,
conv3MetaWSSInStatus TypeConv1MetaAFDInStatus,
conv3MetaCCCDPOutStatus TypeConv1MetaCCCDPOutStatus,
conv3MetaCCCDPInStatus TypeConv1MetaAFDInStatus,
conv3MetaCCCDPInsertion OnOffValue,
conv3MetaCCCDPSourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv3MetaCCCDPSourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv3MetaCCCDPSourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv3MetaCCRAWOutStatus TypeConv1MetaCCCDPOutStatus,
conv3MetaCCRAWInStatus TypeConv1MetaAFDInStatus,
conv3MetaCCRAWInsertion OnOffValue,
conv3MetaCCRAWSourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv3MetaCCRAWSourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv3MetaCCRAWSourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv3MetaCCL21OutStatus TypeConv1MetaCCCDPOutStatus,
conv3MetaCCL21InStatus TypeConv1MetaAFDInStatus,
conv3MetaCCL21Insertion OnOffValue,
conv3MetaCCL21SourcePrio1 TypeConv1MetaCCCDPSourcePrio1,
conv3MetaCCL21SourcePrio2 TypeConv1MetaCCCDPSourcePrio2,
conv3MetaCCL21SourcePrio3 TypeConv1MetaCCCDPSourcePrio2,
conv3MetaTCLTCInStatus TypeConv1MetaAFDInStatus,
conv3MetaTCLTCInsertion OnOffValue,
conv3MetaTCLTCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv3MetaTCLTCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv3MetaTCLTCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv3MetaTCVITCInStatus TypeConv1MetaAFDInStatus,
conv3MetaTCVITCInsertion OnOffValue,
conv3MetaTCVITCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv3MetaTCVITCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv3MetaTCVITCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv3MetaTCDVITCInStatus TypeConv1MetaTCDVITCInStatus,
conv3MetaTCDVITCInsertion OnOffValue,
conv3MetaTCDVITCSourcePrio1 TypeConv1MetaTCLTCSourcePrio1,
conv3MetaTCDVITCSourcePrio2 TypeConv1MetaTCLTCSourcePrio2,
conv3MetaTCDVITCSourcePrio3 TypeConv1MetaTCLTCSourcePrio2,
conv3MetaTCLTCOutStatus TypeConv1MetaCCCDPOutStatus,
conv3MetaTCVITCOutStatus TypeConv1MetaCCCDPOutStatus,
conv3MetaTCDVITCAOutStatus TypeConv1MetaCCCDPOutStatus,
conv3MetaTCDVITCBOutStatus TypeConv1MetaCCCDPOutStatus,
conv3MetaTCDVITCADestination625 TypeConv1MetaTCDVITCADestination625,
conv3MetaTCDVITCBDestination625 TypeConv1MetaTCDVITCADestination625,
conv3MetaTCDVITCADestination525 TypeConv1MetaTCDVITCADestination625,
conv3MetaTCDVITCBDestination525 TypeConv1MetaTCDVITCADestination625,
conv3MetaTCDVITCADetectedSrcLine Integer32,
conv3MetaTCDVITCBDetectedSrcLine Integer32,
conv3MetaTCVITCDetectedDVITCLine Integer32,
conv3MetaTCDVITCAutomatic OnOffValue,
conv3MetaTXTWSTInStatus TypeConv1MetaAFDInStatus,
conv3MetaTXTS2031InStatus TypeConv1MetaAFDInStatus,
conv3MetaTXTOP47InStatus TypeConv1MetaAFDInStatus,
conv3MetaTXTEncoderMode TypeConv1MetaTXTEncoderMode,
conv3MetaTXTLinesSelectionMode TypeConv1MetaTXTLinesSelectionMode,
conv3MetaField1Overflow TypeConv1MetaField1Overflow,
conv3MetaField2Overflow TypeConv1MetaField1Overflow,
conv3MetaSMPTE2020Status TypeConv1MetaSMPTE2020Status,
conv3MetaSMPTE2020Insertion OnOffValue,
conv3ModeAutoARto169 TypeConv1ModeAutoARto169,
conv3ModeAutoARto43 TypeConv1ModeAutoARto169,
conv3InsertAFDFullFrame169 TypeConv1InsertAFDFullFrame169,
conv3ModeAutoFallback TypeConv1ModeAutoFallback,
sDIIn1TXTWSTInStatus TypeConv1MetaAFDInStatus,
sDIIn1TXTS2031InStatus TypeConv1MetaAFDInStatus,
sDIIn1TXTOP47InStatus TypeConv1MetaAFDInStatus,
sDIIn1TXTDecoderMode TypeSDIIn1TXTDecoderMode,
sDIIn2TXTWSTInStatus TypeConv1MetaAFDInStatus,
sDIIn2TXTS2031InStatus TypeConv1MetaAFDInStatus,
sDIIn2TXTOP47InStatus TypeConv1MetaAFDInStatus,
sDIIn2TXTDecoderMode TypeSDIIn1TXTDecoderMode,
sDIIn1TCDVITCASource625 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource625 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCASource525 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource525 TypeSDIIn1TCDVITCASource625,
sDIIn2TCDVITCASource625 TypeSDIIn1TCDVITCASource625,
sDIIn2TCDVITCBSource625 TypeSDIIn1TCDVITCASource625,
sDIIn2TCDVITCASource525 TypeSDIIn1TCDVITCASource625,
sDIIn2TCDVITCBSource525 TypeSDIIn1TCDVITCASource625,
sDIIn1CCCDPStatus TypeConv1MetaAFDInStatus,
sDIIn1CCRAWStatus TypeConv1MetaAFDInStatus,
sDIIn1CCL21Status TypeConv1MetaAFDInStatus,
sDIIn1TCLTCStatus TypeConv1MetaAFDInStatus,
sDIIn1TCVITCStatus TypeConv1MetaAFDInStatus,
sDIIn1TCDVITCStatus TypeConv1MetaTCDVITCInStatus,
sDIIn2CCCDPStatus TypeConv1MetaAFDInStatus,
sDIIn2CCRAWStatus TypeConv1MetaAFDInStatus,
sDIIn2CCL21Status TypeConv1MetaAFDInStatus,
sDIIn2TCLTCStatus TypeConv1MetaAFDInStatus,
sDIIn2TCVITCStatus TypeConv1MetaAFDInStatus,
sDIIn2TCDVITCStatus TypeConv1MetaTCDVITCInStatus,
out1Assign TypeOut1Assign,
out1Standard TypeConv1StatusOut,
out2Assign TypeOut1Assign,
out2Standard TypeConv1StatusOut,
out3Assign TypeOut1Assign,
out3Standard TypeConv1StatusOut,
out4Assign TypeOut1Assign,
out4Standard TypeConv1StatusOut,
out1DelayFrames Integer32,
out1DelayLines Integer32,
out1DelayPixel Integer32,
out1DelayMs FixedPointValue3,
out1ApertureEnable OnOffValue,
out1ApertureLevel Integer32,
out1HBlank OnOffValue,
out1VBlank OnOffValue,
out1Gain Integer32,
out1Saturation Integer32,
out1BlackLevel FixedPointValue1,
out1Hue FixedPointValue1,
out1TestPatternSelect TypeOut1TestPatternSelect,
out1TestPatternStd TypeOut1TestPatternStd,
out1TestPatternOn OnOffValue,
out1CSC TypeOut1CSC,
out1CSCMode TypeOut1CSCMode,
out1IfNoInput TypeOut1IfNoInput,
out1ModifyPsF TypeOut1ModifyPsF,
out2DelayFrames Integer32,
out2DelayLines Integer32,
out2DelayPixel Integer32,
out2DelayMs FixedPointValue3,
out2ApertureEnable OnOffValue,
out2ApertureLevel Integer32,
out2HBlank OnOffValue,
out2VBlank OnOffValue,
out2Gain Integer32,
out2Saturation Integer32,
out2BlackLevel FixedPointValue1,
out2Hue FixedPointValue1,
out2TestPatternSelect TypeOut1TestPatternSelect,
out2TestPatternStd TypeOut1TestPatternStd,
out2TestPatternOn OnOffValue,
out2CSC TypeOut1CSC,
out2CSCMode TypeOut1CSCMode,
out2IfNoInput TypeOut1IfNoInput,
out2ModifyPsF TypeOut1ModifyPsF,
out3DelayFrames Integer32,
out3DelayLines Integer32,
out3DelayPixel Integer32,
out3DelayMs FixedPointValue3,
out3ApertureEnable OnOffValue,
out3ApertureLevel Integer32,
out3HBlank OnOffValue,
out3VBlank OnOffValue,
out3Gain Integer32,
out3Saturation Integer32,
out3BlackLevel FixedPointValue1,
out3Hue FixedPointValue1,
out3TestPatternSelect TypeOut1TestPatternSelect,
out3TestPatternStd TypeOut1TestPatternStd,
out3TestPatternOn OnOffValue,
out3CSC TypeOut1CSC,
out3CSCMode TypeOut1CSCMode,
out3IfNoInput TypeOut1IfNoInput,
out3ModifyPsF TypeOut1ModifyPsF,
out4DelayFrames Integer32,
out4DelayLines Integer32,
out4DelayPixel Integer32,
out4DelayMs FixedPointValue3,
out4ApertureEnable OnOffValue,
out4ApertureLevel Integer32,
out4HBlank OnOffValue,
out4VBlank OnOffValue,
out4Gain Integer32,
out4Saturation Integer32,
out4BlackLevel FixedPointValue1,
out4Hue FixedPointValue1,
out4TestPatternSelect TypeOut1TestPatternSelect,
out4TestPatternStd TypeOut1TestPatternStd,
out4TestPatternOn OnOffValue,
out4CSC TypeOut1CSC,
out4CSCMode TypeOut1CSCMode,
out4IfNoInput TypeOut1IfNoInput,
out4ModifyPsF TypeOut1ModifyPsF,
inputStatusAES1 TypeInputStatusAES1,
inputStatusAES2 TypeInputStatusAES1,
inputStatusAES3 TypeInputStatusAES1,
inputStatusAES4 TypeInputStatusAES1,
sourceInternAudio1 TypeSourceInternAudio1,
sourceInternAudio2 TypeSourceInternAudio1,
sourceInternAudio3 TypeSourceInternAudio1,
sourceInternAudio4 TypeSourceInternAudio1,
sourceInternAudio5 TypeSourceInternAudio1,
sourceInternAudio6 TypeSourceInternAudio1,
sourceInternAudio7 TypeSourceInternAudio1,
sourceInternAudio8 TypeSourceInternAudio1,
sourceInternAudio9 TypeSourceInternAudio1,
sourceInternAudio10 TypeSourceInternAudio1,
sourceInternAudio11 TypeSourceInternAudio1,
sourceInternAudio12 TypeSourceInternAudio1,
sourceInternAudio13 TypeSourceInternAudio1,
sourceInternAudio14 TypeSourceInternAudio1,
sourceInternAudio15 TypeSourceInternAudio1,
sourceInternAudio16 TypeSourceInternAudio1,
sourceInternAudio17 TypeSourceInternAudio1,
sourceInternAudio18 TypeSourceInternAudio1,
sourceInternAudio19 TypeSourceInternAudio1,
sourceInternAudio20 TypeSourceInternAudio1,
sourceInternAudioDirect11 TypeSourceInternAudioDirect11,
sourceInternAudioDirect12 TypeSourceInternAudioDirect11,
sourceInternAudioDirect13 TypeSourceInternAudioDirect11,
sourceInternAudioDirect14 TypeSourceInternAudioDirect11,
sourceInternAudioDirect21 TypeSourceInternAudioDirect21,
sourceInternAudioDirect22 TypeSourceInternAudioDirect21,
sourceInternAudioDirect23 TypeSourceInternAudioDirect21,
sourceInternAudioDirect24 TypeSourceInternAudioDirect21,
sRC1 OnOffValue,
sRC2 OnOffValue,
sRC3 OnOffValue,
sRC4 OnOffValue,
sRC5 OnOffValue,
sRC6 OnOffValue,
sRC7 OnOffValue,
sRC8 OnOffValue,
audioGain1L FixedPointValue1,
audioMute1L TypeAudioMute1L,
audioInvert1L TypeAudioInvert1L,
audioSilence1L TypeAudioSilence1L,
audioOverload1L TypeAudioOverload1L,
audioGain1R FixedPointValue1,
audioMute1R TypeAudioMute1L,
audioInvert1R TypeAudioInvert1L,
audioSilence1R TypeAudioSilence1L,
audioOverload1R TypeAudioOverload1L,
audioMixDown1 OnOffValue,
audioGain2L FixedPointValue1,
audioMute2L TypeAudioMute1L,
audioInvert2L TypeAudioInvert1L,
audioSilence2L TypeAudioSilence1L,
audioOverload2L TypeAudioOverload1L,
audioGain2R FixedPointValue1,
audioMute2R TypeAudioMute1L,
audioInvert2R TypeAudioInvert1L,
audioSilence2R TypeAudioSilence1L,
audioOverload2R TypeAudioOverload1L,
audioMixDown2 OnOffValue,
audioGain3L FixedPointValue1,
audioMute3L TypeAudioMute1L,
audioInvert3L TypeAudioInvert1L,
audioSilence3L TypeAudioSilence1L,
audioOverload3L TypeAudioOverload1L,
audioGain3R FixedPointValue1,
audioMute3R TypeAudioMute1L,
audioInvert3R TypeAudioInvert1L,
audioSilence3R TypeAudioSilence1L,
audioOverload3R TypeAudioOverload1L,
audioMixDown3 OnOffValue,
audioGain4L FixedPointValue1,
audioMute4L TypeAudioMute1L,
audioInvert4L TypeAudioInvert1L,
audioSilence4L TypeAudioSilence1L,
audioOverload4L TypeAudioOverload1L,
audioGain4R FixedPointValue1,
audioMute4R TypeAudioMute1L,
audioInvert4R TypeAudioInvert1L,
audioSilence4R TypeAudioSilence1L,
audioOverload4R TypeAudioOverload1L,
audioMixDown4 OnOffValue,
audioGain5L FixedPointValue1,
audioMute5L TypeAudioMute1L,
audioInvert5L TypeAudioInvert1L,
audioSilence5L TypeAudioSilence1L,
audioOverload5L TypeAudioOverload1L,
audioGain5R FixedPointValue1,
audioMute5R TypeAudioMute1L,
audioInvert5R TypeAudioInvert1L,
audioSilence5R TypeAudioSilence1L,
audioOverload5R TypeAudioOverload1L,
audioMixDown5 OnOffValue,
audioGain6L FixedPointValue1,
audioMute6L TypeAudioMute1L,
audioInvert6L TypeAudioInvert1L,
audioSilence6L TypeAudioSilence1L,
audioOverload6L TypeAudioOverload1L,
audioGain6R FixedPointValue1,
audioMute6R TypeAudioMute1L,
audioInvert6R TypeAudioInvert1L,
audioSilence6R TypeAudioSilence1L,
audioOverload6R TypeAudioOverload1L,
audioMixDown6 OnOffValue,
audioGain7L FixedPointValue1,
audioMute7L TypeAudioMute1L,
audioInvert7L TypeAudioInvert1L,
audioSilence7L TypeAudioSilence1L,
audioOverload7L TypeAudioOverload1L,
audioGain7R FixedPointValue1,
audioMute7R TypeAudioMute1L,
audioInvert7R TypeAudioInvert1L,
audioSilence7R TypeAudioSilence1L,
audioOverload7R TypeAudioOverload1L,
audioMixDown7 OnOffValue,
audioGain8L FixedPointValue1,
audioMute8L TypeAudioMute1L,
audioInvert8L TypeAudioInvert1L,
audioSilence8L TypeAudioSilence1L,
audioOverload8L TypeAudioOverload1L,
audioGain8R FixedPointValue1,
audioMute8R TypeAudioMute1L,
audioInvert8R TypeAudioInvert1L,
audioSilence8R TypeAudioSilence1L,
audioOverload8R TypeAudioOverload1L,
audioMixDown8 OnOffValue,
audioGain9L FixedPointValue1,
audioMute9L TypeAudioMute1L,
audioInvert9L TypeAudioInvert1L,
audioSilence9L TypeAudioSilence1L,
audioOverload9L TypeAudioOverload1L,
audioGain9R FixedPointValue1,
audioMute9R TypeAudioMute1L,
audioInvert9R TypeAudioInvert1L,
audioSilence9R TypeAudioSilence1L,
audioOverload9R TypeAudioOverload1L,
audioMixDown9 OnOffValue,
audioGain10L FixedPointValue1,
audioMute10L TypeAudioMute1L,
audioInvert10L TypeAudioInvert1L,
audioSilence10L TypeAudioSilence1L,
audioOverload10L TypeAudioOverload1L,
audioGain10R FixedPointValue1,
audioMute10R TypeAudioMute1L,
audioInvert10R TypeAudioInvert1L,
audioSilence10R TypeAudioSilence1L,
audioOverload10R TypeAudioOverload1L,
audioMixDown10 OnOffValue,
audioGain11L FixedPointValue1,
audioMute11L TypeAudioMute1L,
audioInvert11L TypeAudioInvert1L,
audioSilence11L TypeAudioSilence1L,
audioOverload11L TypeAudioOverload1L,
audioGain11R FixedPointValue1,
audioMute11R TypeAudioMute1L,
audioInvert11R TypeAudioInvert1L,
audioSilence11R TypeAudioSilence1L,
audioOverload11R TypeAudioOverload1L,
audioMixDown11 OnOffValue,
audioGain12L FixedPointValue1,
audioMute12L TypeAudioMute1L,
audioInvert12L TypeAudioInvert1L,
audioSilence12L TypeAudioSilence1L,
audioOverload12L TypeAudioOverload1L,
audioGain12R FixedPointValue1,
audioMute12R TypeAudioMute1L,
audioInvert12R TypeAudioInvert1L,
audioSilence12R TypeAudioSilence1L,
audioOverload12R TypeAudioOverload1L,
audioMixDown12 OnOffValue,
audioGain13L FixedPointValue1,
audioMute13L TypeAudioMute1L,
audioInvert13L TypeAudioInvert1L,
audioSilence13L TypeAudioSilence1L,
audioOverload13L TypeAudioOverload1L,
audioGain13R FixedPointValue1,
audioMute13R TypeAudioMute1L,
audioInvert13R TypeAudioInvert1L,
audioSilence13R TypeAudioSilence1L,
audioOverload13R TypeAudioOverload1L,
audioMixDown13 OnOffValue,
audioGain14L FixedPointValue1,
audioMute14L TypeAudioMute1L,
audioInvert14L TypeAudioInvert1L,
audioSilence14L TypeAudioSilence1L,
audioOverload14L TypeAudioOverload1L,
audioGain14R FixedPointValue1,
audioMute14R TypeAudioMute1L,
audioInvert14R TypeAudioInvert1L,
audioSilence14R TypeAudioSilence1L,
audioOverload14R TypeAudioOverload1L,
audioMixDown14 OnOffValue,
audioGain15L FixedPointValue1,
audioMute15L TypeAudioMute1L,
audioInvert15L TypeAudioInvert1L,
audioSilence15L TypeAudioSilence1L,
audioOverload15L TypeAudioOverload1L,
audioGain15R FixedPointValue1,
audioMute15R TypeAudioMute1L,
audioInvert15R TypeAudioInvert1L,
audioSilence15R TypeAudioSilence1L,
audioOverload15R TypeAudioOverload1L,
audioMixDown15 OnOffValue,
audioGain16L FixedPointValue1,
audioMute16L TypeAudioMute1L,
audioInvert16L TypeAudioInvert1L,
audioSilence16L TypeAudioSilence1L,
audioOverload16L TypeAudioOverload1L,
audioGain16R FixedPointValue1,
audioMute16R TypeAudioMute1L,
audioInvert16R TypeAudioInvert1L,
audioSilence16R TypeAudioSilence1L,
audioOverload16R TypeAudioOverload1L,
audioMixDown16 OnOffValue,
audioGain17L FixedPointValue1,
audioMute17L TypeAudioMute1L,
audioInvert17L TypeAudioInvert1L,
audioSilence17L TypeAudioSilence1L,
audioOverload17L TypeAudioOverload1L,
audioGain17R FixedPointValue1,
audioMute17R TypeAudioMute1L,
audioInvert17R TypeAudioInvert1L,
audioSilence17R TypeAudioSilence1L,
audioOverload17R TypeAudioOverload1L,
audioMixDown17 OnOffValue,
audioGain18L FixedPointValue1,
audioMute18L TypeAudioMute1L,
audioInvert18L TypeAudioInvert1L,
audioSilence18L TypeAudioSilence1L,
audioOverload18L TypeAudioOverload1L,
audioGain18R FixedPointValue1,
audioMute18R TypeAudioMute1L,
audioInvert18R TypeAudioInvert1L,
audioSilence18R TypeAudioSilence1L,
audioOverload18R TypeAudioOverload1L,
audioMixDown18 OnOffValue,
audioGain19L FixedPointValue1,
audioMute19L TypeAudioMute1L,
audioInvert19L TypeAudioInvert1L,
audioSilence19L TypeAudioSilence1L,
audioOverload19L TypeAudioOverload1L,
audioGain19R FixedPointValue1,
audioMute19R TypeAudioMute1L,
audioInvert19R TypeAudioInvert1L,
audioSilence19R TypeAudioSilence1L,
audioOverload19R TypeAudioOverload1L,
audioMixDown19 OnOffValue,
audioGain20L FixedPointValue1,
audioMute20L TypeAudioMute1L,
audioInvert20L TypeAudioInvert1L,
audioSilence20L TypeAudioSilence1L,
audioOverload20L TypeAudioOverload1L,
audioGain20R FixedPointValue1,
audioMute20R TypeAudioMute1L,
audioInvert20R TypeAudioInvert1L,
audioSilence20R TypeAudioSilence1L,
audioOverload20R TypeAudioOverload1L,
audioMixDown20 OnOffValue,
bits11 TypeBits11,
bits12 TypeBits11,
bits13 TypeBits11,
bits14 TypeBits11,
bits21 TypeBits11,
bits22 TypeBits11,
bits23 TypeBits11,
bits24 TypeBits11,
bits31 TypeBits11,
bits32 TypeBits11,
bits33 TypeBits11,
bits34 TypeBits11,
bits41 TypeBits11,
bits42 TypeBits11,
bits43 TypeBits11,
bits44 TypeBits11,
sourceAudioOutAES1L TypeSourceAudioOutAES1L,
sourceAudioOutAES1R TypeSourceAudioOutAES1L,
sourceAudioOutAES2L TypeSourceAudioOutAES1L,
sourceAudioOutAES2R TypeSourceAudioOutAES1L,
sourceAudioOutAES3L TypeSourceAudioOutAES1L,
sourceAudioOutAES3R TypeSourceAudioOutAES1L,
sourceAudioOutAES4L TypeSourceAudioOutAES1L,
sourceAudioOutAES4R TypeSourceAudioOutAES1L,
sourceAudioOutMUX11L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX11R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX12L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX12R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX13L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX13R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX14L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX14R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX15L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX15R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX16L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX16R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX17L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX17R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX18L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX18R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX21L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX21R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX22L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX22R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX23L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX23R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX24L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX24R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX25L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX25R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX26L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX26R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX27L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX27R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX28L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX28R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX31L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX31R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX32L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX32R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX33L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX33R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX34L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX34R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX35L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX35R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX36L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX36R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX37L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX37R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX38L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX38R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX41L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX41R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX42L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX42R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX43L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX43R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX44L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX44R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX45L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX45R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX46L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX46R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX47L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX47R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX48L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX48R TypeSourceAudioOutMUX11L,
out1EmbedGroup1 OnOffValue,
out1EmbedGroup2 OnOffValue,
out1EmbedGroup3 OnOffValue,
out1EmbedGroup4 OnOffValue,
out2EmbedGroup1 OnOffValue,
out2EmbedGroup2 OnOffValue,
out2EmbedGroup3 OnOffValue,
out2EmbedGroup4 OnOffValue,
out3EmbedGroup1 OnOffValue,
out3EmbedGroup2 OnOffValue,
out3EmbedGroup3 OnOffValue,
out3EmbedGroup4 OnOffValue,
out4EmbedGroup1 OnOffValue,
out4EmbedGroup2 OnOffValue,
out4EmbedGroup3 OnOffValue,
out4EmbedGroup4 OnOffValue,
out1StatusGroup1 TypeOut1StatusGroup1,
out1StatusGroup2 TypeOut1StatusGroup1,
out1StatusGroup3 TypeOut1StatusGroup1,
out1StatusGroup4 TypeOut1StatusGroup1,
out2StatusGroup1 TypeOut1StatusGroup1,
out2StatusGroup2 TypeOut1StatusGroup1,
out2StatusGroup3 TypeOut1StatusGroup1,
out2StatusGroup4 TypeOut1StatusGroup1,
out3StatusGroup1 TypeOut1StatusGroup1,
out3StatusGroup2 TypeOut1StatusGroup1,
out3StatusGroup3 TypeOut1StatusGroup1,
out3StatusGroup4 TypeOut1StatusGroup1,
out4StatusGroup1 TypeOut1StatusGroup1,
out4StatusGroup2 TypeOut1StatusGroup1,
out4StatusGroup3 TypeOut1StatusGroup1,
out4StatusGroup4 TypeOut1StatusGroup1,
out1DeleteGroup1 TypeOut1DeleteGroup1,
out1DeleteGroup2 TypeOut1DeleteGroup1,
out1DeleteGroup3 TypeOut1DeleteGroup1,
out1DeleteGroup4 TypeOut1DeleteGroup1,
out2DeleteGroup1 TypeOut1DeleteGroup1,
out2DeleteGroup2 TypeOut1DeleteGroup1,
out2DeleteGroup3 TypeOut1DeleteGroup1,
out2DeleteGroup4 TypeOut1DeleteGroup1,
out3DeleteGroup1 TypeOut1DeleteGroup1,
out3DeleteGroup2 TypeOut1DeleteGroup1,
out3DeleteGroup3 TypeOut1DeleteGroup1,
out3DeleteGroup4 TypeOut1DeleteGroup1,
out4DeleteGroup1 TypeOut1DeleteGroup1,
out4DeleteGroup2 TypeOut1DeleteGroup1,
out4DeleteGroup3 TypeOut1DeleteGroup1,
out4DeleteGroup4 TypeOut1DeleteGroup1,
temperatureMAX1617Int Integer32,
temperatureMAX1617Ext Integer32,
audioDelayAESIn1 FixedPointValue2,
audioDelayAESIn2 FixedPointValue2,
audioDelayAESIn3 FixedPointValue2,
audioDelayAESIn4 FixedPointValue2,
audioDelayAESOut1 FixedPointValue2,
audioDelayAESOut2 FixedPointValue2,
audioDelayAESOut3 FixedPointValue2,
audioDelayAESOut4 FixedPointValue2,
audioDelaySDI11 FixedPointValue2,
audioDelaySDI12 FixedPointValue2,
audioDelaySDI13 FixedPointValue2,
audioDelaySDI14 FixedPointValue2,
audioDelaySDI15 FixedPointValue2,
audioDelaySDI16 FixedPointValue2,
audioDelaySDI17 FixedPointValue2,
audioDelaySDI18 FixedPointValue2,
audioDelaySDI21 FixedPointValue2,
audioDelaySDI22 FixedPointValue2,
audioDelaySDI23 FixedPointValue2,
audioDelaySDI24 FixedPointValue2,
audioDelaySDI25 FixedPointValue2,
audioDelaySDI26 FixedPointValue2,
audioDelaySDI27 FixedPointValue2,
audioDelaySDI28 FixedPointValue2,
audioDelaySDIOut11 FixedPointValue2,
audioDelaySDIOut12 FixedPointValue2,
audioDelaySDIOut13 FixedPointValue2,
audioDelaySDIOut14 FixedPointValue2,
audioDelaySDIOut15 FixedPointValue2,
audioDelaySDIOut16 FixedPointValue2,
audioDelaySDIOut17 FixedPointValue2,
audioDelaySDIOut18 FixedPointValue2,
audioDelaySDIOut21 FixedPointValue2,
audioDelaySDIOut22 FixedPointValue2,
audioDelaySDIOut23 FixedPointValue2,
audioDelaySDIOut24 FixedPointValue2,
audioDelaySDIOut25 FixedPointValue2,
audioDelaySDIOut26 FixedPointValue2,
audioDelaySDIOut27 FixedPointValue2,
audioDelaySDIOut28 FixedPointValue2,
audioDelaySDIOut31 FixedPointValue2,
audioDelaySDIOut32 FixedPointValue2,
audioDelaySDIOut33 FixedPointValue2,
audioDelaySDIOut34 FixedPointValue2,
audioDelaySDIOut35 FixedPointValue2,
audioDelaySDIOut36 FixedPointValue2,
audioDelaySDIOut37 FixedPointValue2,
audioDelaySDIOut38 FixedPointValue2,
audioDelaySDIOut41 FixedPointValue2,
audioDelaySDIOut42 FixedPointValue2,
audioDelaySDIOut43 FixedPointValue2,
audioDelaySDIOut44 FixedPointValue2,
audioDelaySDIOut45 FixedPointValue2,
audioDelaySDIOut46 FixedPointValue2,
audioDelaySDIOut47 FixedPointValue2,
audioDelaySDIOut48 FixedPointValue2,
videoDelayTracking TypeVideoDelayTracking,
delayPulseAssign TypeDelayPulseAssign,
deembPhaseSync1 OnOffValue,
deembPhaseSyncVerify1 TypeDeembPhaseSyncVerify1,
deembPhaseSync2 OnOffValue,
deembPhaseSyncVerify2 TypeDeembPhaseSyncVerify1,
presetsGPIOn TypePresetsGPIOn,
presetsGPIOff TypePresetsGPIOn,
genLockStatus TypeGenLockStatus,
inputToRefDelay1H Integer32,
inputToRefDelay1V Integer32,
inputToRefDelay2H Integer32,
inputToRefDelay2V Integer32,
audioContentSDI11 TypeAudioContentSDI11,
audioContentSDI12 TypeAudioContentSDI11,
audioContentSDI13 TypeAudioContentSDI11,
audioContentSDI14 TypeAudioContentSDI11,
audioContentSDI15 TypeAudioContentSDI11,
audioContentSDI16 TypeAudioContentSDI11,
audioContentSDI17 TypeAudioContentSDI11,
audioContentSDI18 TypeAudioContentSDI11,
audioContentSDI21 TypeAudioContentSDI11,
audioContentSDI22 TypeAudioContentSDI11,
audioContentSDI23 TypeAudioContentSDI11,
audioContentSDI24 TypeAudioContentSDI11,
audioContentSDI25 TypeAudioContentSDI11,
audioContentSDI26 TypeAudioContentSDI11,
audioContentSDI27 TypeAudioContentSDI11,
audioContentSDI28 TypeAudioContentSDI11,
audioContentStatusSDI11 TypeAudioContentStatusSDI11,
audioContentStatusSDI12 TypeAudioContentStatusSDI11,
audioContentStatusSDI13 TypeAudioContentStatusSDI11,
audioContentStatusSDI14 TypeAudioContentStatusSDI11,
audioContentStatusSDI15 TypeAudioContentStatusSDI11,
audioContentStatusSDI16 TypeAudioContentStatusSDI11,
audioContentStatusSDI17 TypeAudioContentStatusSDI11,
audioContentStatusSDI18 TypeAudioContentStatusSDI11,
audioContentStatusSDI21 TypeAudioContentStatusSDI11,
audioContentStatusSDI22 TypeAudioContentStatusSDI11,
audioContentStatusSDI23 TypeAudioContentStatusSDI11,
audioContentStatusSDI24 TypeAudioContentStatusSDI11,
audioContentStatusSDI25 TypeAudioContentStatusSDI11,
audioContentStatusSDI26 TypeAudioContentStatusSDI11,
audioContentStatusSDI27 TypeAudioContentStatusSDI11,
audioContentStatusSDI28 TypeAudioContentStatusSDI11,
audioContentAES1 TypeAudioContentSDI11,
audioContentAES2 TypeAudioContentSDI11,
audioContentAES3 TypeAudioContentSDI11,
audioContentAES4 TypeAudioContentSDI11,
audioContentStatusAES1 TypeAudioContentStatusSDI11,
audioContentStatusAES2 TypeAudioContentStatusSDI11,
audioContentStatusAES3 TypeAudioContentStatusSDI11,
audioContentStatusAES4 TypeAudioContentStatusSDI11,
out1MetaLineSelectionMode TypeConv1MetaTXTLinesSelectionMode,
out1MetaS352Insertion TypeDeembPhaseSyncVerify1,
out1MetaAFDLine TypeOut1MetaAFDLine,
out1MetaCCCDPLine TypeOut1MetaAFDLine,
out1MetaCCRAWLine TypeOut1MetaAFDLine,
out1MetaS2020Line TypeOut1MetaAFDLine,
out1MetaS2031WSTLine TypeOut1MetaAFDLine,
out1MetaOP47WSTLine TypeOut1MetaAFDLine,
out1MetaATCLTCLine TypeOut1MetaAFDLine,
out1MetaATCVITCLine TypeOut1MetaAFDLine,
out1MetaATCLTCLocation TypeOut1MetaATCLTCLocation,
out1MetaATCVITCLocation TypeOut1MetaATCLTCLocation,
out2MetaLineSelectionMode TypeConv1MetaTXTLinesSelectionMode,
out2MetaS352Insertion TypeDeembPhaseSyncVerify1,
out2MetaAFDLine TypeOut1MetaAFDLine,
out2MetaCCCDPLine TypeOut1MetaAFDLine,
out2MetaCCRAWLine TypeOut1MetaAFDLine,
out2MetaS2020Line TypeOut1MetaAFDLine,
out2MetaS2031WSTLine TypeOut1MetaAFDLine,
out2MetaOP47WSTLine TypeOut1MetaAFDLine,
out2MetaATCLTCLine TypeOut1MetaAFDLine,
out2MetaATCVITCLine TypeOut1MetaAFDLine,
out2MetaATCLTCLocation TypeOut1MetaATCLTCLocation,
out2MetaATCVITCLocation TypeOut1MetaATCLTCLocation,
out3MetaLineSelectionMode TypeConv1MetaTXTLinesSelectionMode,
out3MetaS352Insertion TypeDeembPhaseSyncVerify1,
out3MetaAFDLine TypeOut1MetaAFDLine,
out3MetaCCCDPLine TypeOut1MetaAFDLine,
out3MetaCCRAWLine TypeOut1MetaAFDLine,
out3MetaS2020Line TypeOut1MetaAFDLine,
out3MetaS2031WSTLine TypeOut1MetaAFDLine,
out3MetaOP47WSTLine TypeOut1MetaAFDLine,
out3MetaATCLTCLine TypeOut1MetaAFDLine,
out3MetaATCVITCLine TypeOut1MetaAFDLine,
out3MetaATCLTCLocation TypeOut1MetaATCLTCLocation,
out3MetaATCVITCLocation TypeOut1MetaATCLTCLocation,
out4MetaLineSelectionMode TypeConv1MetaTXTLinesSelectionMode,
out4MetaS352Insertion TypeDeembPhaseSyncVerify1,
out4MetaAFDLine TypeOut1MetaAFDLine,
out4MetaCCCDPLine TypeOut1MetaAFDLine,
out4MetaCCRAWLine TypeOut1MetaAFDLine,
out4MetaS2020Line TypeOut1MetaAFDLine,
out4MetaS2031WSTLine TypeOut1MetaAFDLine,
out4MetaOP47WSTLine TypeOut1MetaAFDLine,
out4MetaATCLTCLine TypeOut1MetaAFDLine,
out4MetaATCVITCLine TypeOut1MetaAFDLine,
out4MetaATCLTCLocation TypeOut1MetaATCLTCLocation,
out4MetaATCVITCLocation TypeOut1MetaATCLTCLocation,
sDIIn1StatusAFD TypeSDIIn1StatusAFD,
sDIIn1StatusWSS TypeSDIIn1StatusWSS,
sDIIn1StatusVI TypeSDIIn1StatusVI,
sDIIn1AFDLine TypeSDIIn1AFDLine,
sDIIn1CCCDPLine TypeSDIIn1AFDLine,
sDIIn1CCRAWLine TypeSDIIn1AFDLine,
sDIIn1S2020Line TypeSDIIn1AFDLine,
sDIIn1S2031WSTFirstLine TypeSDIIn1AFDLine,
sDIIn1S2031WSTLastLine TypeSDIIn1AFDLine,
sDIIn1OP47WSTFirstLine TypeSDIIn1AFDLine,
sDIIn1OP47WSTLastLine TypeSDIIn1AFDLine,
sDIIn1ATCLTCLine TypeSDIIn1AFDLine,
sDIIn1ATCVITCLine TypeSDIIn1AFDLine,
sDIIn1ATCLTCLocation TypeOut1MetaATCLTCLocation,
sDIIn1ATCVITCLocation TypeOut1MetaATCLTCLocation,
sDIIn1StatusFormatReactOnChange TypeSDIIn1StatusFormatReactOnChange,
sDIIn1StatusFormatReactOnLoss TypeSDIIn1StatusFormatReactOnChange,
sDIIn2StatusAFD TypeSDIIn1StatusAFD,
sDIIn2StatusWSS TypeSDIIn1StatusWSS,
sDIIn2StatusVI TypeSDIIn1StatusVI,
sDIIn2AFDLine TypeSDIIn1AFDLine,
sDIIn2CCCDPLine TypeSDIIn1AFDLine,
sDIIn2CCRAWLine TypeSDIIn1AFDLine,
sDIIn2S2020Line TypeSDIIn1AFDLine,
sDIIn2S2031WSTFirstLine TypeSDIIn1AFDLine,
sDIIn2S2031WSTLastLine TypeSDIIn1AFDLine,
sDIIn2OP47WSTFirstLine TypeSDIIn1AFDLine,
sDIIn2OP47WSTLastLine TypeSDIIn1AFDLine,
sDIIn2ATCLTCLine TypeSDIIn1AFDLine,
sDIIn2ATCVITCLine TypeSDIIn1AFDLine,
sDIIn2ATCLTCLocation TypeOut1MetaATCLTCLocation,
sDIIn2ATCVITCLocation TypeOut1MetaATCLTCLocation,
sDIIn2StatusFormatReactOnChange TypeSDIIn1StatusFormatReactOnChange,
sDIIn2StatusFormatReactOnLoss TypeSDIIn1StatusFormatReactOnChange,
snapToReferenceFrameLength OnOffValue,
out1ClipHeadroom OnOffValue,
out2ClipHeadroom OnOffValue,
out3ClipHeadroom OnOffValue,
out4ClipHeadroom OnOffValue,
out1FixedProcTime OnOffValue,
out2FixedProcTime OnOffValue,
out3FixedProcTime OnOffValue,
out4FixedProcTime OnOffValue,
out1DelayMode TypeOut1DelayMode,
out2DelayMode TypeOut1DelayMode,
out3DelayMode TypeOut1DelayMode,
out4DelayMode TypeOut1DelayMode,
out1FreezeMode TypeOut1FreezeMode,
out2FreezeMode TypeOut1FreezeMode,
out3FreezeMode TypeOut1FreezeMode,
out4FreezeMode TypeOut1FreezeMode,
audioDolbyETiming1 TypeAudioDolbyETiming1,
audioDolbyETiming2 TypeAudioDolbyETiming1,
audioDolbyETiming3 TypeAudioDolbyETiming1,
audioDolbyETiming4 TypeAudioDolbyETiming1,
conv3COCOGainG FixedPointValue1,
conv3COCOGainB FixedPointValue1,
conv3COCOGainR FixedPointValue1,
conv3COCOOffsetG FixedPointValue1,
conv3COCOOffsetB FixedPointValue1,
conv3COCOOffsetR FixedPointValue1,
conv3COCOGangGains OnOffValue,
conv3COCOGangOffsets OnOffValue,
conv3COCOMode TypeConv3COCOMode,
out1TotalProcTime FixedPointValue3,
out2TotalProcTime FixedPointValue3,
out3TotalProcTime FixedPointValue3,
out4TotalProcTime FixedPointValue3,
sDIIn1SourceType TypeSDIIn1SourceType,
aSCA OnOffValue,
aSCAResourceAssign TypeASCAResourceAssign,
presetsNumber Integer32,
presetsActive TypePresetsGPIOn,
presetsSaveAs TypePresetsSaveAs,
presetsLoadToCurrent TypePresetsSaveAs,
presetsName0 DisplayString,
presetsName1 DisplayString,
presetsName2 DisplayString,
presetsName3 DisplayString,
presetsName4 DisplayString,
presetsName5 DisplayString,
presetsName6 DisplayString,
presetsName7 DisplayString,
out1FrameSyncCompensation Integer32,
boardID Integer32,
audioDelayAESOutGang OnOffValue,
audioDelaySDIOut1Gang OnOffValue,
audioDelaySDIOut2Gang OnOffValue,
audioDelaySDIOut3Gang OnOffValue,
audioDelaySDIOut4Gang OnOffValue,
eventReferenceNoInputSNMP TypeEventReferenceNoInputSNMP,
eventSDIInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
eventSDIInput2NoInputSNMP TypeEventReferenceNoInputSNMP,
eventFanFailureSNMP TypeEventReferenceNoInputSNMP,
eventHighTemperatureSNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoSDIInput1SNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoSDIInput2SNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoReferenceSNMP TypeEventReferenceNoInputSNMP,
eventAESInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput2NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput3NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput4NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput1asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput2asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput3asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput4asynchronousSNMP TypeEventReferenceNoInputSNMP,
conv1InputStatus TypeReferenceStatus,
conv2InputStatus TypeReferenceStatus,
conv3InputStatus TypeReferenceStatus,
crossBarAudioIntern DisplayString,
crossBarAudioOutMUX1 DisplayString,
crossBarAudioOutMUX2 DisplayString,
crossBarAudioOutMUX3 DisplayString,
crossBarAudioOutMUX4 DisplayString,
crossBarAudioOutExtAES DisplayString,
conv3InSize DisplayString,
conv3OutSize DisplayString,
sNumber DisplayString }
-- Conformance statements
conformance OBJECT-IDENTITY
STATUS current
DESCRIPTION "Conformance declaration of PVD5660-BO-DO-DOW"
::= { sw402 2 }
paramGroup OBJECT-GROUP
OBJECTS {
typeName,
displayName,
position,
uptime,
type,
version,
statusColor,
statusColorRGB,
statusText,
factoryReset,
lock,
locate,
eventReferenceNoInput,
eventSDIInput1NoInput,
eventSDIInput2NoInput,
eventFanFailure,
eventHighTemperature,
eventCouldnotlocktoSDIInput1,
eventCouldnotlocktoSDIInput2,
eventCouldnotlocktoReference,
eventAESInput1NoInput,
eventAESInput2NoInput,
eventAESInput3NoInput,
eventAESInput4NoInput,
eventAESInput1asynchronous,
eventAESInput2asynchronous,
eventAESInput3asynchronous,
eventAESInput4asynchronous,
channel2CoupleTo1,
channel3CoupleTo1,
channel4CoupleTo1,
referenceLock,
referenceStatus,
referenceSource,
freqPreselect,
freq,
gPIFunc,
syncMode1,
inputStatusSDI1,
inputFreezeSDI1,
syncSDIIn1,
syncMode2,
inputStatusSDI2,
inputFreezeSDI2,
syncSDIIn2,
conv1Source,
conv1ControlMode,
conv1AspectInSelect,
conv1AspectIn,
conv1FormatOut,
conv1StatusOut,
conv1Mode,
conv1OutInsertAFD,
conv1OutInsertVI,
conv1OutInsertWSS,
conv1StatusIn,
conv2Source,
conv2ControlMode,
conv2AspectInSelect,
conv2AspectIn,
conv2FormatOut,
conv2StatusOut,
conv2Mode,
conv2OutInsertAFD,
conv2OutInsertVI,
conv2OutInsertWSS,
conv2StatusIn,
conv3Source,
conv3ControlMode,
conv3AspectInSelect,
conv3AspectIn,
conv3FormatOut,
conv3StatusOut,
conv3Mode,
conv3AdvancedSettings,
conv3OutInsertAFD,
conv3OutInsertVI,
conv3OutInsertWSS,
conv3StatusIn,
conv3CropHpos,
conv3CropVpos,
conv3CropHsize,
conv3CropVsize,
conv3InsertHpos,
conv3InsertVpos,
conv3InsertHsize,
conv3InsertVsize,
conv3MotionAdaptive,
conv3NRGeneral,
conv3NRBlockArtifact,
conv3NRMosquito,
conv3DetailLevel,
conv3DetailThreshold,
conv1MetaAdvancedSettings,
conv1MetaCCSourceDefaultPriorities,
conv1MetaTCSourceDefaultPriorities,
conv1MetaAFDInStatus,
conv1MetaVIInStatus,
conv1MetaWSSInStatus,
conv1MetaCCCDPOutStatus,
conv1MetaCCCDPInStatus,
conv1MetaCCCDPInsertion,
conv1MetaCCCDPSourcePrio1,
conv1MetaCCCDPSourcePrio2,
conv1MetaCCCDPSourcePrio3,
conv1MetaCCRAWOutStatus,
conv1MetaCCRAWInStatus,
conv1MetaCCRAWInsertion,
conv1MetaCCRAWSourcePrio1,
conv1MetaCCRAWSourcePrio2,
conv1MetaCCRAWSourcePrio3,
conv1MetaCCL21OutStatus,
conv1MetaCCL21InStatus,
conv1MetaCCL21Insertion,
conv1MetaCCL21SourcePrio1,
conv1MetaCCL21SourcePrio2,
conv1MetaCCL21SourcePrio3,
conv1MetaTCLTCInStatus,
conv1MetaTCLTCInsertion,
conv1MetaTCLTCSourcePrio1,
conv1MetaTCLTCSourcePrio2,
conv1MetaTCLTCSourcePrio3,
conv1MetaTCVITCInStatus,
conv1MetaTCVITCInsertion,
conv1MetaTCVITCSourcePrio1,
conv1MetaTCVITCSourcePrio2,
conv1MetaTCVITCSourcePrio3,
conv1MetaTCDVITCInStatus,
conv1MetaTCDVITCInsertion,
conv1MetaTCDVITCSourcePrio1,
conv1MetaTCDVITCSourcePrio2,
conv1MetaTCDVITCSourcePrio3,
conv1MetaTCLTCOutStatus,
conv1MetaTCVITCOutStatus,
conv1MetaTCDVITCAOutStatus,
conv1MetaTCDVITCBOutStatus,
conv1MetaTCDVITCADestination625,
conv1MetaTCDVITCBDestination625,
conv1MetaTCDVITCADestination525,
conv1MetaTCDVITCBDestination525,
conv1MetaTCDVITCADetectedSrcLine,
conv1MetaTCDVITCBDetectedSrcLine,
conv1MetaTCVITCDetectedDVITCLine,
conv1MetaTCDVITCAutomatic,
conv1MetaTXTWSTInStatus,
conv1MetaTXTS2031InStatus,
conv1MetaTXTOP47InStatus,
conv1MetaTXTEncoderMode,
conv1MetaTXTLinesSelectionMode,
conv1MetaField1Overflow,
conv1MetaField2Overflow,
conv1MetaSMPTE2020Status,
conv1MetaSMPTE2020Insertion,
conv1ModeAutoARto169,
conv1ModeAutoARto43,
conv1InsertAFDFullFrame169,
conv1ModeAutoFallback,
conv2MetaAdvancedSettings,
conv2MetaCCSourceDefaultPriorities,
conv2MetaTCSourceDefaultPriorities,
conv2MetaAFDInStatus,
conv2MetaVIInStatus,
conv2MetaWSSInStatus,
conv2MetaCCCDPOutStatus,
conv2MetaCCCDPInStatus,
conv2MetaCCCDPInsertion,
conv2MetaCCCDPSourcePrio1,
conv2MetaCCCDPSourcePrio2,
conv2MetaCCCDPSourcePrio3,
conv2MetaCCRAWOutStatus,
conv2MetaCCRAWInStatus,
conv2MetaCCRAWInsertion,
conv2MetaCCRAWSourcePrio1,
conv2MetaCCRAWSourcePrio2,
conv2MetaCCRAWSourcePrio3,
conv2MetaCCL21OutStatus,
conv2MetaCCL21InStatus,
conv2MetaCCL21Insertion,
conv2MetaCCL21SourcePrio1,
conv2MetaCCL21SourcePrio2,
conv2MetaCCL21SourcePrio3,
conv2MetaTCLTCInStatus,
conv2MetaTCLTCInsertion,
conv2MetaTCLTCSourcePrio1,
conv2MetaTCLTCSourcePrio2,
conv2MetaTCLTCSourcePrio3,
conv2MetaTCVITCInStatus,
conv2MetaTCVITCInsertion,
conv2MetaTCVITCSourcePrio1,
conv2MetaTCVITCSourcePrio2,
conv2MetaTCVITCSourcePrio3,
conv2MetaTCDVITCInStatus,
conv2MetaTCDVITCInsertion,
conv2MetaTCDVITCSourcePrio1,
conv2MetaTCDVITCSourcePrio2,
conv2MetaTCDVITCSourcePrio3,
conv2MetaTCLTCOutStatus,
conv2MetaTCVITCOutStatus,
conv2MetaTCDVITCAOutStatus,
conv2MetaTCDVITCBOutStatus,
conv2MetaTCDVITCADestination625,
conv2MetaTCDVITCBDestination625,
conv2MetaTCDVITCADestination525,
conv2MetaTCDVITCBDestination525,
conv2MetaTCDVITCADetectedSrcLine,
conv2MetaTCDVITCBDetectedSrcLine,
conv2MetaTCVITCDetectedDVITCLine,
conv2MetaTCDVITCAutomatic,
conv2MetaTXTWSTInStatus,
conv2MetaTXTS2031InStatus,
conv2MetaTXTOP47InStatus,
conv2MetaTXTEncoderMode,
conv2MetaTXTLinesSelectionMode,
conv2MetaField1Overflow,
conv2MetaField2Overflow,
conv2MetaSMPTE2020Status,
conv2MetaSMPTE2020Insertion,
conv2ModeAutoARto169,
conv2ModeAutoARto43,
conv2InsertAFDFullFrame169,
conv2ModeAutoFallback,
conv3MetaAdvancedSettings,
conv3MetaCCSourceDefaultPriorities,
conv3MetaTCSourceDefaultPriorities,
conv3MetaAFDInStatus,
conv3MetaVIInStatus,
conv3MetaWSSInStatus,
conv3MetaCCCDPOutStatus,
conv3MetaCCCDPInStatus,
conv3MetaCCCDPInsertion,
conv3MetaCCCDPSourcePrio1,
conv3MetaCCCDPSourcePrio2,
conv3MetaCCCDPSourcePrio3,
conv3MetaCCRAWOutStatus,
conv3MetaCCRAWInStatus,
conv3MetaCCRAWInsertion,
conv3MetaCCRAWSourcePrio1,
conv3MetaCCRAWSourcePrio2,
conv3MetaCCRAWSourcePrio3,
conv3MetaCCL21OutStatus,
conv3MetaCCL21InStatus,
conv3MetaCCL21Insertion,
conv3MetaCCL21SourcePrio1,
conv3MetaCCL21SourcePrio2,
conv3MetaCCL21SourcePrio3,
conv3MetaTCLTCInStatus,
conv3MetaTCLTCInsertion,
conv3MetaTCLTCSourcePrio1,
conv3MetaTCLTCSourcePrio2,
conv3MetaTCLTCSourcePrio3,
conv3MetaTCVITCInStatus,
conv3MetaTCVITCInsertion,
conv3MetaTCVITCSourcePrio1,
conv3MetaTCVITCSourcePrio2,
conv3MetaTCVITCSourcePrio3,
conv3MetaTCDVITCInStatus,
conv3MetaTCDVITCInsertion,
conv3MetaTCDVITCSourcePrio1,
conv3MetaTCDVITCSourcePrio2,
conv3MetaTCDVITCSourcePrio3,
conv3MetaTCLTCOutStatus,
conv3MetaTCVITCOutStatus,
conv3MetaTCDVITCAOutStatus,
conv3MetaTCDVITCBOutStatus,
conv3MetaTCDVITCADestination625,
conv3MetaTCDVITCBDestination625,
conv3MetaTCDVITCADestination525,
conv3MetaTCDVITCBDestination525,
conv3MetaTCDVITCADetectedSrcLine,
conv3MetaTCDVITCBDetectedSrcLine,
conv3MetaTCVITCDetectedDVITCLine,
conv3MetaTCDVITCAutomatic,
conv3MetaTXTWSTInStatus,
conv3MetaTXTS2031InStatus,
conv3MetaTXTOP47InStatus,
conv3MetaTXTEncoderMode,
conv3MetaTXTLinesSelectionMode,
conv3MetaField1Overflow,
conv3MetaField2Overflow,
conv3MetaSMPTE2020Status,
conv3MetaSMPTE2020Insertion,
conv3ModeAutoARto169,
conv3ModeAutoARto43,
conv3InsertAFDFullFrame169,
conv3ModeAutoFallback,
sDIIn1TXTWSTInStatus,
sDIIn1TXTS2031InStatus,
sDIIn1TXTOP47InStatus,
sDIIn1TXTDecoderMode,
sDIIn2TXTWSTInStatus,
sDIIn2TXTS2031InStatus,
sDIIn2TXTOP47InStatus,
sDIIn2TXTDecoderMode,
sDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource625,
sDIIn1TCDVITCASource525,
sDIIn1TCDVITCBSource525,
sDIIn2TCDVITCASource625,
sDIIn2TCDVITCBSource625,
sDIIn2TCDVITCASource525,
sDIIn2TCDVITCBSource525,
sDIIn1CCCDPStatus,
sDIIn1CCRAWStatus,
sDIIn1CCL21Status,
sDIIn1TCLTCStatus,
sDIIn1TCVITCStatus,
sDIIn1TCDVITCStatus,
sDIIn2CCCDPStatus,
sDIIn2CCRAWStatus,
sDIIn2CCL21Status,
sDIIn2TCLTCStatus,
sDIIn2TCVITCStatus,
sDIIn2TCDVITCStatus,
out1Assign,
out1Standard,
out2Assign,
out2Standard,
out3Assign,
out3Standard,
out4Assign,
out4Standard,
out1DelayFrames,
out1DelayLines,
out1DelayPixel,
out1DelayMs,
out1ApertureEnable,
out1ApertureLevel,
out1HBlank,
out1VBlank,
out1Gain,
out1Saturation,
out1BlackLevel,
out1Hue,
out1TestPatternSelect,
out1TestPatternStd,
out1TestPatternOn,
out1CSC,
out1CSCMode,
out1IfNoInput,
out1ModifyPsF,
out2DelayFrames,
out2DelayLines,
out2DelayPixel,
out2DelayMs,
out2ApertureEnable,
out2ApertureLevel,
out2HBlank,
out2VBlank,
out2Gain,
out2Saturation,
out2BlackLevel,
out2Hue,
out2TestPatternSelect,
out2TestPatternStd,
out2TestPatternOn,
out2CSC,
out2CSCMode,
out2IfNoInput,
out2ModifyPsF,
out3DelayFrames,
out3DelayLines,
out3DelayPixel,
out3DelayMs,
out3ApertureEnable,
out3ApertureLevel,
out3HBlank,
out3VBlank,
out3Gain,
out3Saturation,
out3BlackLevel,
out3Hue,
out3TestPatternSelect,
out3TestPatternStd,
out3TestPatternOn,
out3CSC,
out3CSCMode,
out3IfNoInput,
out3ModifyPsF,
out4DelayFrames,
out4DelayLines,
out4DelayPixel,
out4DelayMs,
out4ApertureEnable,
out4ApertureLevel,
out4HBlank,
out4VBlank,
out4Gain,
out4Saturation,
out4BlackLevel,
out4Hue,
out4TestPatternSelect,
out4TestPatternStd,
out4TestPatternOn,
out4CSC,
out4CSCMode,
out4IfNoInput,
out4ModifyPsF,
inputStatusAES1,
inputStatusAES2,
inputStatusAES3,
inputStatusAES4,
sourceInternAudio1,
sourceInternAudio2,
sourceInternAudio3,
sourceInternAudio4,
sourceInternAudio5,
sourceInternAudio6,
sourceInternAudio7,
sourceInternAudio8,
sourceInternAudio9,
sourceInternAudio10,
sourceInternAudio11,
sourceInternAudio12,
sourceInternAudio13,
sourceInternAudio14,
sourceInternAudio15,
sourceInternAudio16,
sourceInternAudio17,
sourceInternAudio18,
sourceInternAudio19,
sourceInternAudio20,
sourceInternAudioDirect11,
sourceInternAudioDirect12,
sourceInternAudioDirect13,
sourceInternAudioDirect14,
sourceInternAudioDirect21,
sourceInternAudioDirect22,
sourceInternAudioDirect23,
sourceInternAudioDirect24,
sRC1,
sRC2,
sRC3,
sRC4,
sRC5,
sRC6,
sRC7,
sRC8,
audioGain1L,
audioMute1L,
audioInvert1L,
audioSilence1L,
audioOverload1L,
audioGain1R,
audioMute1R,
audioInvert1R,
audioSilence1R,
audioOverload1R,
audioMixDown1,
audioGain2L,
audioMute2L,
audioInvert2L,
audioSilence2L,
audioOverload2L,
audioGain2R,
audioMute2R,
audioInvert2R,
audioSilence2R,
audioOverload2R,
audioMixDown2,
audioGain3L,
audioMute3L,
audioInvert3L,
audioSilence3L,
audioOverload3L,
audioGain3R,
audioMute3R,
audioInvert3R,
audioSilence3R,
audioOverload3R,
audioMixDown3,
audioGain4L,
audioMute4L,
audioInvert4L,
audioSilence4L,
audioOverload4L,
audioGain4R,
audioMute4R,
audioInvert4R,
audioSilence4R,
audioOverload4R,
audioMixDown4,
audioGain5L,
audioMute5L,
audioInvert5L,
audioSilence5L,
audioOverload5L,
audioGain5R,
audioMute5R,
audioInvert5R,
audioSilence5R,
audioOverload5R,
audioMixDown5,
audioGain6L,
audioMute6L,
audioInvert6L,
audioSilence6L,
audioOverload6L,
audioGain6R,
audioMute6R,
audioInvert6R,
audioSilence6R,
audioOverload6R,
audioMixDown6,
audioGain7L,
audioMute7L,
audioInvert7L,
audioSilence7L,
audioOverload7L,
audioGain7R,
audioMute7R,
audioInvert7R,
audioSilence7R,
audioOverload7R,
audioMixDown7,
audioGain8L,
audioMute8L,
audioInvert8L,
audioSilence8L,
audioOverload8L,
audioGain8R,
audioMute8R,
audioInvert8R,
audioSilence8R,
audioOverload8R,
audioMixDown8,
audioGain9L,
audioMute9L,
audioInvert9L,
audioSilence9L,
audioOverload9L,
audioGain9R,
audioMute9R,
audioInvert9R,
audioSilence9R,
audioOverload9R,
audioMixDown9,
audioGain10L,
audioMute10L,
audioInvert10L,
audioSilence10L,
audioOverload10L,
audioGain10R,
audioMute10R,
audioInvert10R,
audioSilence10R,
audioOverload10R,
audioMixDown10,
audioGain11L,
audioMute11L,
audioInvert11L,
audioSilence11L,
audioOverload11L,
audioGain11R,
audioMute11R,
audioInvert11R,
audioSilence11R,
audioOverload11R,
audioMixDown11,
audioGain12L,
audioMute12L,
audioInvert12L,
audioSilence12L,
audioOverload12L,
audioGain12R,
audioMute12R,
audioInvert12R,
audioSilence12R,
audioOverload12R,
audioMixDown12,
audioGain13L,
audioMute13L,
audioInvert13L,
audioSilence13L,
audioOverload13L,
audioGain13R,
audioMute13R,
audioInvert13R,
audioSilence13R,
audioOverload13R,
audioMixDown13,
audioGain14L,
audioMute14L,
audioInvert14L,
audioSilence14L,
audioOverload14L,
audioGain14R,
audioMute14R,
audioInvert14R,
audioSilence14R,
audioOverload14R,
audioMixDown14,
audioGain15L,
audioMute15L,
audioInvert15L,
audioSilence15L,
audioOverload15L,
audioGain15R,
audioMute15R,
audioInvert15R,
audioSilence15R,
audioOverload15R,
audioMixDown15,
audioGain16L,
audioMute16L,
audioInvert16L,
audioSilence16L,
audioOverload16L,
audioGain16R,
audioMute16R,
audioInvert16R,
audioSilence16R,
audioOverload16R,
audioMixDown16,
audioGain17L,
audioMute17L,
audioInvert17L,
audioSilence17L,
audioOverload17L,
audioGain17R,
audioMute17R,
audioInvert17R,
audioSilence17R,
audioOverload17R,
audioMixDown17,
audioGain18L,
audioMute18L,
audioInvert18L,
audioSilence18L,
audioOverload18L,
audioGain18R,
audioMute18R,
audioInvert18R,
audioSilence18R,
audioOverload18R,
audioMixDown18,
audioGain19L,
audioMute19L,
audioInvert19L,
audioSilence19L,
audioOverload19L,
audioGain19R,
audioMute19R,
audioInvert19R,
audioSilence19R,
audioOverload19R,
audioMixDown19,
audioGain20L,
audioMute20L,
audioInvert20L,
audioSilence20L,
audioOverload20L,
audioGain20R,
audioMute20R,
audioInvert20R,
audioSilence20R,
audioOverload20R,
audioMixDown20,
bits11,
bits12,
bits13,
bits14,
bits21,
bits22,
bits23,
bits24,
bits31,
bits32,
bits33,
bits34,
bits41,
bits42,
bits43,
bits44,
sourceAudioOutAES1L,
sourceAudioOutAES1R,
sourceAudioOutAES2L,
sourceAudioOutAES2R,
sourceAudioOutAES3L,
sourceAudioOutAES3R,
sourceAudioOutAES4L,
sourceAudioOutAES4R,
sourceAudioOutMUX11L,
sourceAudioOutMUX11R,
sourceAudioOutMUX12L,
sourceAudioOutMUX12R,
sourceAudioOutMUX13L,
sourceAudioOutMUX13R,
sourceAudioOutMUX14L,
sourceAudioOutMUX14R,
sourceAudioOutMUX15L,
sourceAudioOutMUX15R,
sourceAudioOutMUX16L,
sourceAudioOutMUX16R,
sourceAudioOutMUX17L,
sourceAudioOutMUX17R,
sourceAudioOutMUX18L,
sourceAudioOutMUX18R,
sourceAudioOutMUX21L,
sourceAudioOutMUX21R,
sourceAudioOutMUX22L,
sourceAudioOutMUX22R,
sourceAudioOutMUX23L,
sourceAudioOutMUX23R,
sourceAudioOutMUX24L,
sourceAudioOutMUX24R,
sourceAudioOutMUX25L,
sourceAudioOutMUX25R,
sourceAudioOutMUX26L,
sourceAudioOutMUX26R,
sourceAudioOutMUX27L,
sourceAudioOutMUX27R,
sourceAudioOutMUX28L,
sourceAudioOutMUX28R,
sourceAudioOutMUX31L,
sourceAudioOutMUX31R,
sourceAudioOutMUX32L,
sourceAudioOutMUX32R,
sourceAudioOutMUX33L,
sourceAudioOutMUX33R,
sourceAudioOutMUX34L,
sourceAudioOutMUX34R,
sourceAudioOutMUX35L,
sourceAudioOutMUX35R,
sourceAudioOutMUX36L,
sourceAudioOutMUX36R,
sourceAudioOutMUX37L,
sourceAudioOutMUX37R,
sourceAudioOutMUX38L,
sourceAudioOutMUX38R,
sourceAudioOutMUX41L,
sourceAudioOutMUX41R,
sourceAudioOutMUX42L,
sourceAudioOutMUX42R,
sourceAudioOutMUX43L,
sourceAudioOutMUX43R,
sourceAudioOutMUX44L,
sourceAudioOutMUX44R,
sourceAudioOutMUX45L,
sourceAudioOutMUX45R,
sourceAudioOutMUX46L,
sourceAudioOutMUX46R,
sourceAudioOutMUX47L,
sourceAudioOutMUX47R,
sourceAudioOutMUX48L,
sourceAudioOutMUX48R,
out1EmbedGroup1,
out1EmbedGroup2,
out1EmbedGroup3,
out1EmbedGroup4,
out2EmbedGroup1,
out2EmbedGroup2,
out2EmbedGroup3,
out2EmbedGroup4,
out3EmbedGroup1,
out3EmbedGroup2,
out3EmbedGroup3,
out3EmbedGroup4,
out4EmbedGroup1,
out4EmbedGroup2,
out4EmbedGroup3,
out4EmbedGroup4,
out1StatusGroup1,
out1StatusGroup2,
out1StatusGroup3,
out1StatusGroup4,
out2StatusGroup1,
out2StatusGroup2,
out2StatusGroup3,
out2StatusGroup4,
out3StatusGroup1,
out3StatusGroup2,
out3StatusGroup3,
out3StatusGroup4,
out4StatusGroup1,
out4StatusGroup2,
out4StatusGroup3,
out4StatusGroup4,
out1DeleteGroup1,
out1DeleteGroup2,
out1DeleteGroup3,
out1DeleteGroup4,
out2DeleteGroup1,
out2DeleteGroup2,
out2DeleteGroup3,
out2DeleteGroup4,
out3DeleteGroup1,
out3DeleteGroup2,
out3DeleteGroup3,
out3DeleteGroup4,
out4DeleteGroup1,
out4DeleteGroup2,
out4DeleteGroup3,
out4DeleteGroup4,
temperatureMAX1617Int,
temperatureMAX1617Ext,
audioDelayAESIn1,
audioDelayAESIn2,
audioDelayAESIn3,
audioDelayAESIn4,
audioDelayAESOut1,
audioDelayAESOut2,
audioDelayAESOut3,
audioDelayAESOut4,
audioDelaySDI11,
audioDelaySDI12,
audioDelaySDI13,
audioDelaySDI14,
audioDelaySDI15,
audioDelaySDI16,
audioDelaySDI17,
audioDelaySDI18,
audioDelaySDI21,
audioDelaySDI22,
audioDelaySDI23,
audioDelaySDI24,
audioDelaySDI25,
audioDelaySDI26,
audioDelaySDI27,
audioDelaySDI28,
audioDelaySDIOut11,
audioDelaySDIOut12,
audioDelaySDIOut13,
audioDelaySDIOut14,
audioDelaySDIOut15,
audioDelaySDIOut16,
audioDelaySDIOut17,
audioDelaySDIOut18,
audioDelaySDIOut21,
audioDelaySDIOut22,
audioDelaySDIOut23,
audioDelaySDIOut24,
audioDelaySDIOut25,
audioDelaySDIOut26,
audioDelaySDIOut27,
audioDelaySDIOut28,
audioDelaySDIOut31,
audioDelaySDIOut32,
audioDelaySDIOut33,
audioDelaySDIOut34,
audioDelaySDIOut35,
audioDelaySDIOut36,
audioDelaySDIOut37,
audioDelaySDIOut38,
audioDelaySDIOut41,
audioDelaySDIOut42,
audioDelaySDIOut43,
audioDelaySDIOut44,
audioDelaySDIOut45,
audioDelaySDIOut46,
audioDelaySDIOut47,
audioDelaySDIOut48,
videoDelayTracking,
delayPulseAssign,
deembPhaseSync1,
deembPhaseSyncVerify1,
deembPhaseSync2,
deembPhaseSyncVerify2,
presetsGPIOn,
presetsGPIOff,
genLockStatus,
inputToRefDelay1H,
inputToRefDelay1V,
inputToRefDelay2H,
inputToRefDelay2V,
audioContentSDI11,
audioContentSDI12,
audioContentSDI13,
audioContentSDI14,
audioContentSDI15,
audioContentSDI16,
audioContentSDI17,
audioContentSDI18,
audioContentSDI21,
audioContentSDI22,
audioContentSDI23,
audioContentSDI24,
audioContentSDI25,
audioContentSDI26,
audioContentSDI27,
audioContentSDI28,
audioContentStatusSDI11,
audioContentStatusSDI12,
audioContentStatusSDI13,
audioContentStatusSDI14,
audioContentStatusSDI15,
audioContentStatusSDI16,
audioContentStatusSDI17,
audioContentStatusSDI18,
audioContentStatusSDI21,
audioContentStatusSDI22,
audioContentStatusSDI23,
audioContentStatusSDI24,
audioContentStatusSDI25,
audioContentStatusSDI26,
audioContentStatusSDI27,
audioContentStatusSDI28,
audioContentAES1,
audioContentAES2,
audioContentAES3,
audioContentAES4,
audioContentStatusAES1,
audioContentStatusAES2,
audioContentStatusAES3,
audioContentStatusAES4,
out1MetaLineSelectionMode,
out1MetaS352Insertion,
out1MetaAFDLine,
out1MetaCCCDPLine,
out1MetaCCRAWLine,
out1MetaS2020Line,
out1MetaS2031WSTLine,
out1MetaOP47WSTLine,
out1MetaATCLTCLine,
out1MetaATCVITCLine,
out1MetaATCLTCLocation,
out1MetaATCVITCLocation,
out2MetaLineSelectionMode,
out2MetaS352Insertion,
out2MetaAFDLine,
out2MetaCCCDPLine,
out2MetaCCRAWLine,
out2MetaS2020Line,
out2MetaS2031WSTLine,
out2MetaOP47WSTLine,
out2MetaATCLTCLine,
out2MetaATCVITCLine,
out2MetaATCLTCLocation,
out2MetaATCVITCLocation,
out3MetaLineSelectionMode,
out3MetaS352Insertion,
out3MetaAFDLine,
out3MetaCCCDPLine,
out3MetaCCRAWLine,
out3MetaS2020Line,
out3MetaS2031WSTLine,
out3MetaOP47WSTLine,
out3MetaATCLTCLine,
out3MetaATCVITCLine,
out3MetaATCLTCLocation,
out3MetaATCVITCLocation,
out4MetaLineSelectionMode,
out4MetaS352Insertion,
out4MetaAFDLine,
out4MetaCCCDPLine,
out4MetaCCRAWLine,
out4MetaS2020Line,
out4MetaS2031WSTLine,
out4MetaOP47WSTLine,
out4MetaATCLTCLine,
out4MetaATCVITCLine,
out4MetaATCLTCLocation,
out4MetaATCVITCLocation,
sDIIn1StatusAFD,
sDIIn1StatusWSS,
sDIIn1StatusVI,
sDIIn1AFDLine,
sDIIn1CCCDPLine,
sDIIn1CCRAWLine,
sDIIn1S2020Line,
sDIIn1S2031WSTFirstLine,
sDIIn1S2031WSTLastLine,
sDIIn1OP47WSTFirstLine,
sDIIn1OP47WSTLastLine,
sDIIn1ATCLTCLine,
sDIIn1ATCVITCLine,
sDIIn1ATCLTCLocation,
sDIIn1ATCVITCLocation,
sDIIn1StatusFormatReactOnChange,
sDIIn1StatusFormatReactOnLoss,
sDIIn2StatusAFD,
sDIIn2StatusWSS,
sDIIn2StatusVI,
sDIIn2AFDLine,
sDIIn2CCCDPLine,
sDIIn2CCRAWLine,
sDIIn2S2020Line,
sDIIn2S2031WSTFirstLine,
sDIIn2S2031WSTLastLine,
sDIIn2OP47WSTFirstLine,
sDIIn2OP47WSTLastLine,
sDIIn2ATCLTCLine,
sDIIn2ATCVITCLine,
sDIIn2ATCLTCLocation,
sDIIn2ATCVITCLocation,
sDIIn2StatusFormatReactOnChange,
sDIIn2StatusFormatReactOnLoss,
snapToReferenceFrameLength,
out1ClipHeadroom,
out2ClipHeadroom,
out3ClipHeadroom,
out4ClipHeadroom,
out1FixedProcTime,
out2FixedProcTime,
out3FixedProcTime,
out4FixedProcTime,
out1DelayMode,
out2DelayMode,
out3DelayMode,
out4DelayMode,
out1FreezeMode,
out2FreezeMode,
out3FreezeMode,
out4FreezeMode,
audioDolbyETiming1,
audioDolbyETiming2,
audioDolbyETiming3,
audioDolbyETiming4,
conv3COCOGainG,
conv3COCOGainB,
conv3COCOGainR,
conv3COCOOffsetG,
conv3COCOOffsetB,
conv3COCOOffsetR,
conv3COCOGangGains,
conv3COCOGangOffsets,
conv3COCOMode,
out1TotalProcTime,
out2TotalProcTime,
out3TotalProcTime,
out4TotalProcTime,
sDIIn1SourceType,
aSCA,
aSCAResourceAssign,
presetsNumber,
presetsActive,
presetsSaveAs,
presetsLoadToCurrent,
presetsName0,
presetsName1,
presetsName2,
presetsName3,
presetsName4,
presetsName5,
presetsName6,
presetsName7,
out1FrameSyncCompensation,
boardID,
audioDelayAESOutGang,
audioDelaySDIOut1Gang,
audioDelaySDIOut2Gang,
audioDelaySDIOut3Gang,
audioDelaySDIOut4Gang,
eventReferenceNoInputSNMP,
eventSDIInput1NoInputSNMP,
eventSDIInput2NoInputSNMP,
eventFanFailureSNMP,
eventHighTemperatureSNMP,
eventCouldnotlocktoSDIInput1SNMP,
eventCouldnotlocktoSDIInput2SNMP,
eventCouldnotlocktoReferenceSNMP,
eventAESInput1NoInputSNMP,
eventAESInput2NoInputSNMP,
eventAESInput3NoInputSNMP,
eventAESInput4NoInputSNMP,
eventAESInput1asynchronousSNMP,
eventAESInput2asynchronousSNMP,
eventAESInput3asynchronousSNMP,
eventAESInput4asynchronousSNMP,
conv1InputStatus,
conv2InputStatus,
conv3InputStatus,
crossBarAudioIntern,
crossBarAudioOutMUX1,
crossBarAudioOutMUX2,
crossBarAudioOutMUX3,
crossBarAudioOutMUX4,
crossBarAudioOutExtAES,
conv3InSize,
conv3OutSize,
sNumber }
STATUS current
DESCRIPTION "Conformance group containing all device parameters"
::= { conformance 1 }
paramCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance specification"
MODULE -- This module
MANDATORY-GROUPS { paramGroup }
::= { conformance 2 }
END