-- Machine generated MIB file, do not edit!
--
-- MIB file for PVD5802, type code 07.F4, software label 679
-- Generated on Tuesday, 09-Aug-16 14:16:15 UTC
-- CVS $Id: PVD5802_07f4_sw679.mib,v 1.4 2016/08/09 14:16:17 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PVD5802-07f4-sw679-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pvd5802-07f4-sw679 MODULE-IDENTITY
    LAST-UPDATED "201608091416Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PVD5802, type code 07.F4, software label 679"
    REVISION "201608091416Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 2036679 }

pvd5802-07f4 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PVD5802"
    ::= { products 2036 }

sw679 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 679"
    ::= { pvd5802-07f4 679 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeBackpanelStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        missing(1),
        present(2)
    }

TypeInStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27)
    }

TypeDelayVideoUserMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        framesLinesPixels(0),
        milliseconds(1)
    }

TypeReferenceLock ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lockToRefIn(0),
        lockToSDI1(1)
    }

TypeReferenceSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        externBoard(0),
        internRack(1)
    }

TypeFreqPreselect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        evenFrequencies(0),
        oddFrequencies(1),
        followLastRefInput(2)
    }

TypeFreq ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        evenFreq(0),
        oddFreq(1),
        evenFreqX(2),
        oddFreqX(3),
        evenFreqXX(4)
    }

TypeSyncMode1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        frameSync(0),
        lineSyncH(1),
        lineSyncV(2)
    }

TypeInputFreezeSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeOnTRSError(0),
        transparentForTRSErrors(1),
        forceFreeze(2)
    }

TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        black(0),
        red(1),
        green(2),
        blue(3),
        cyan(4),
        magenta(5),
        yellow(6),
        white(7),
        n15Grey(8),
        eQPath(9),
        pLLPath(10),
        eQPLLPath(11),
        n75Colorbar(12),
        colorbarOverRed(13)
    }

TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n525(0),
        n625(1),
        n720p60(2),
        n720p5994(3),
        n720p50(4),
        n720p30(5),
        n720p2997(6),
        n720p25(7),
        n720p24(8),
        n720p2398(9),
        n1080i60(10),
        n1080i5994(11),
        n1080i50(12),
        n1080p30(13),
        n1080p2997(14),
        n1080p25(15),
        n1080p24(16),
        n1080p2398(17),
        n1080psF24(18),
        n1080psF2398(19),
        n1080p60(20),
        n1080p5994(21),
        n1080p50(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        followLastInput(26)
    }

TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        testPattern(1),
        black(2),
        freeze(3)
    }

TypeOut1FreezeMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeField1(0),
        freezeField2(1),
        freezeFrame(2),
        testPattern(3)
    }

TypeGPIFunc ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        freezeInput(1),
        switchUserPresets(2),
        switchVideoInputs1112(3)
    }

TypeGPI2Func ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        freezeInput(1),
        switchUserPresets(2)
    }

TypeSDIInSourceSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        sDIIn11(0),
        sDIIn12(1)
    }

TypePresetsGPIOn ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        current(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypePresetsSaveAs ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypePresetsCurrentSettingsBasedOn ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        default(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypeEventPrimaryPowermissingSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 8 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 9 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 10 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 11 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 12 }

backpanelStatus OBJECT-TYPE
    SYNTAX TypeBackpanelStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication of the device backpanel"
    ::= { paramEntry 13 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 14 }

eventPrimaryPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Primary Power missing"
    ::= { paramEntry 16 }

eventRedundantPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Redundant Power missing"
    ::= { paramEntry 17 }

eventFanFailure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Fan Failure"
    ::= { paramEntry 18 }

eventReferenceNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Reference No Input"
    ::= { paramEntry 19 }

eventSDIInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: SDI Input 1 No Input"
    ::= { paramEntry 20 }

eventCouldnotlocktoReference OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Could not lock to Reference"
    ::= { paramEntry 21 }

eventCouldnotlocktoSDIInput1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Could not lock to SDI Input 1"
    ::= { paramEntry 22 }

inStandard OBJECT-TYPE
    SYNTAX TypeInStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input status indication"
    ::= { paramEntry 24 }

outStandard OBJECT-TYPE
    SYNTAX TypeInStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI output"
    ::= { paramEntry 25 }

delayVideoUserMode OBJECT-TYPE
    SYNTAX TypeDelayVideoUserMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "User-defined video delay control mode (frames / lines / pixels or milliseconds)"
    ::= { paramEntry 26 }

delayVideoFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in frames. Combine with Delay/Video/Lines and Delay/Video/Pixels for total delay"
    ::= { paramEntry 27 }

delayVideoLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in lines. Combine with Delay/Video/Frames and Delay/Video/Pixels for total delay"
    ::= { paramEntry 28 }

delayVideoPixels OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in pixels. Combine with Delay/Video/Frames and Delay/Video/Lines for total delay"
    ::= { paramEntry 29 }

delayVideoTotalMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Total SDI output delay in milliseconds"
    ::= { paramEntry 30 }

referenceLock OBJECT-TYPE
    SYNTAX TypeReferenceLock
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock all outputs to one of *RefIn *SDI1In *SDI2In"
    ::= { paramEntry 31 }

referenceStatus OBJECT-TYPE
    SYNTAX TypeInStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of Reference Input"
    ::= { paramEntry 32 }

referenceSource OBJECT-TYPE
    SYNTAX TypeReferenceSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
    ::= { paramEntry 33 }

freqPreselect OBJECT-TYPE
    SYNTAX TypeFreqPreselect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the frequency domain for the complete device (inputs, reference and outputs)"
    ::= { paramEntry 34 }

freq OBJECT-TYPE
    SYNTAX TypeFreq
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
    ::= { paramEntry 35 }

inputToRefTolerance OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Open a tolerance window in the relative timing between SDI In and REF In.<br>To be applied for modifying the timing behavior in Framesync mode.When modified to ON, the SDI Input is accepted as aligned to REF even if it arrives up to 12usec later than REF.<br>See User Manual for details."
    ::= { paramEntry 36 }

syncMode1 OBJECT-TYPE
    SYNTAX TypeSyncMode1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Synchronization Mode for SDI Channel 1"
    ::= { paramEntry 37 }

inputFreezeSDI1 OBJECT-TYPE
    SYNTAX TypeInputFreezeSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
    ::= { paramEntry 38 }

syncSDIIn1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed).<br>This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.<br>NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path."
    ::= { paramEntry 39 }

out1TotalProcTime OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show the total delay comprising the processing time and the user delay <br>on the used path from SDI Input to SDI Output 1"
    ::= { paramEntry 40 }

out1ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable aperture correction"
    ::= { paramEntry 41 }

out1ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: aperture correction level"
    ::= { paramEntry 42 }

out1HBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable H-Blanking"
    ::= { paramEntry 43 }

out1VBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable V-Blanking"
    ::= { paramEntry 44 }

out1HFlip OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: Mirror the output image on the vertical center axis (flip in H direction)."
    ::= { paramEntry 45 }

out1Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust Video Gain"
    ::= { paramEntry 46 }

out1Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Saturation"
    ::= { paramEntry 47 }

out1BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
    ::= { paramEntry 48 }

out1Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Hue"
    ::= { paramEntry 49 }

out1TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 50 }

out1TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 51 }

out1TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable preselected test pattern"
    ::= { paramEntry 52 }

out1IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 53 }

out1ClipHeadroom OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: Clips Y code values outside the range of 40h to 3ACh
 and Cr, Cb code values outside the range of 40h to 3C0h."
    ::= { paramEntry 54 }

out1FreezeMode OBJECT-TYPE
    SYNTAX TypeOut1FreezeMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify freeze mode if input is missing."
    ::= { paramEntry 55 }

gPIFunc OBJECT-TYPE
    SYNTAX TypeGPIFunc
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify influence of GPI input"
    ::= { paramEntry 56 }

gPI2Func OBJECT-TYPE
    SYNTAX TypeGPI2Func
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify influence of GPI input 2"
    ::= { paramEntry 57 }

sDIInSourceSelect OBJECT-TYPE
    SYNTAX TypeSDIInSourceSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source for SDI input from input A or input B"
    ::= { paramEntry 58 }

presetsGPIOn OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 59 }

presetsGPIOff OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 60 }

presetsGPIOffOn OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI 1 is Off and GPI 2 is On.
That applies only if both GPI Influence parameters are set to switch User presets."
    ::= { paramEntry 61 }

presetsGPIOnOn OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when both GPIs are On. 
That applies only if both GPI Influence parameters are set to switch User presets."
    ::= { paramEntry 62 }

inputToRefDelay1H OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Horizontal delay between Input 1 and Reference"
    ::= { paramEntry 63 }

inputToRefDelay1V OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Vertical delay between Input 1 and Reference"
    ::= { paramEntry 64 }

presetsNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "maximum number of user presets"
    ::= { paramEntry 70 }

presetsActive OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Active Preset.<br>NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka <i>Current</i>) and make the required modifications there."
    ::= { paramEntry 71 }

presetsSaveAs OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
    ::= { paramEntry 72 }

presetsCurrentSettingsBasedOn OBJECT-TYPE
    SYNTAX TypePresetsCurrentSettingsBasedOn
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Current Settings based on"
    ::= { paramEntry 73 }

presetsLoadToCurrent OBJECT-TYPE
    SYNTAX TypePresetsCurrentSettingsBasedOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Load a copy of the specified UserPreset as the current settings.<br>The current settings of the complete product will be overwritten. Reading the current value of this parameter tells you which of the available presets has been loaded last.<br>NOTE that the current settings can potentially differ from the loaded preset because individual changes may have been applied at any time."
    ::= { paramEntry 74 }

presetsName0 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 0"
    ::= { paramEntry 75 }

presetsName1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 1"
    ::= { paramEntry 76 }

presetsName2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 2"
    ::= { paramEntry 77 }

presetsName3 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 3"
    ::= { paramEntry 78 }

presetsName4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 4"
    ::= { paramEntry 79 }

presetsName5 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 5"
    ::= { paramEntry 80 }

presetsName6 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 6"
    ::= { paramEntry 81 }

presetsName7 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 7"
    ::= { paramEntry 82 }

delayAudioSDIOutGang OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gang-Mode: Couple all SDI Out Delay values (modify all delay controls synchronously)"
    ::= { paramEntry 83 }

delayAudioAESOutGang OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gang-Mode: Couple all AES Out Delay values (modify all delay controls synchronously)"
    ::= { paramEntry 84 }

eventPrimaryPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Primary Power missing"
    ::= { paramEntry 86 }

eventRedundantPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Redundant Power missing"
    ::= { paramEntry 87 }

eventFanFailureSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Fan Failure"
    ::= { paramEntry 88 }

eventReferenceNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Reference No Input"
    ::= { paramEntry 89 }

eventSDIInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 1 No Input"
    ::= { paramEntry 90 }

eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to Reference"
    ::= { paramEntry 91 }

eventCouldnotlocktoSDIInput1SNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to SDI Input 1"
    ::= { paramEntry 92 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 100 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PVD5802 parameters"
    ::= { sw679 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PVD5802 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    backpanelStatus TypeBackpanelStatus,
    boardID Integer32,
    eventPrimaryPowermissing OnOffValue,
    eventRedundantPowermissing OnOffValue,
    eventFanFailure OnOffValue,
    eventReferenceNoInput OnOffValue,
    eventSDIInput1NoInput OnOffValue,
    eventCouldnotlocktoReference OnOffValue,
    eventCouldnotlocktoSDIInput1 OnOffValue,
    inStandard TypeInStandard,
    outStandard TypeInStandard,
    delayVideoUserMode TypeDelayVideoUserMode,
    delayVideoFrames Integer32,
    delayVideoLines Integer32,
    delayVideoPixels Integer32,
    delayVideoTotalMs FixedPointValue3,
    referenceLock TypeReferenceLock,
    referenceStatus TypeInStandard,
    referenceSource TypeReferenceSource,
    freqPreselect TypeFreqPreselect,
    freq TypeFreq,
    inputToRefTolerance OnOffValue,
    syncMode1 TypeSyncMode1,
    inputFreezeSDI1 TypeInputFreezeSDI1,
    syncSDIIn1 OnOffValue,
    out1TotalProcTime FixedPointValue3,
    out1ApertureEnable OnOffValue,
    out1ApertureLevel Integer32,
    out1HBlank OnOffValue,
    out1VBlank OnOffValue,
    out1HFlip OnOffValue,
    out1Gain Integer32,
    out1Saturation Integer32,
    out1BlackLevel FixedPointValue1,
    out1Hue FixedPointValue1,
    out1TestPatternSelect TypeOut1TestPatternSelect,
    out1TestPatternStd TypeOut1TestPatternStd,
    out1TestPatternOn OnOffValue,
    out1IfNoInput TypeOut1IfNoInput,
    out1ClipHeadroom OnOffValue,
    out1FreezeMode TypeOut1FreezeMode,
    gPIFunc TypeGPIFunc,
    gPI2Func TypeGPI2Func,
    sDIInSourceSelect TypeSDIInSourceSelect,
    presetsGPIOn TypePresetsGPIOn,
    presetsGPIOff TypePresetsGPIOn,
    presetsGPIOffOn TypePresetsGPIOn,
    presetsGPIOnOn TypePresetsGPIOn,
    inputToRefDelay1H Integer32,
    inputToRefDelay1V Integer32,
    presetsNumber Integer32,
    presetsActive TypePresetsGPIOn,
    presetsSaveAs TypePresetsSaveAs,
    presetsCurrentSettingsBasedOn TypePresetsCurrentSettingsBasedOn,
    presetsLoadToCurrent TypePresetsCurrentSettingsBasedOn,
    presetsName0 DisplayString,
    presetsName1 DisplayString,
    presetsName2 DisplayString,
    presetsName3 DisplayString,
    presetsName4 DisplayString,
    presetsName5 DisplayString,
    presetsName6 DisplayString,
    presetsName7 DisplayString,
    delayAudioSDIOutGang OnOffValue,
    delayAudioAESOutGang OnOffValue,
    eventPrimaryPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventRedundantPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventFanFailureSNMP TypeEventPrimaryPowermissingSNMP,
    eventReferenceNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput1NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventCouldnotlocktoReferenceSNMP TypeEventPrimaryPowermissingSNMP,
    eventCouldnotlocktoSDIInput1SNMP TypeEventPrimaryPowermissingSNMP,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PVD5802"
    ::= { sw679 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        lock,
        locate,
        statusColor,
        statusColorRGB,
        statusText,
        backpanelStatus,
        boardID,
        eventPrimaryPowermissing,
        eventRedundantPowermissing,
        eventFanFailure,
        eventReferenceNoInput,
        eventSDIInput1NoInput,
        eventCouldnotlocktoReference,
        eventCouldnotlocktoSDIInput1,
        inStandard,
        outStandard,
        delayVideoUserMode,
        delayVideoFrames,
        delayVideoLines,
        delayVideoPixels,
        delayVideoTotalMs,
        referenceLock,
        referenceStatus,
        referenceSource,
        freqPreselect,
        freq,
        inputToRefTolerance,
        syncMode1,
        inputFreezeSDI1,
        syncSDIIn1,
        out1TotalProcTime,
        out1ApertureEnable,
        out1ApertureLevel,
        out1HBlank,
        out1VBlank,
        out1HFlip,
        out1Gain,
        out1Saturation,
        out1BlackLevel,
        out1Hue,
        out1TestPatternSelect,
        out1TestPatternStd,
        out1TestPatternOn,
        out1IfNoInput,
        out1ClipHeadroom,
        out1FreezeMode,
        gPIFunc,
        gPI2Func,
        sDIInSourceSelect,
        presetsGPIOn,
        presetsGPIOff,
        presetsGPIOffOn,
        presetsGPIOnOn,
        inputToRefDelay1H,
        inputToRefDelay1V,
        presetsNumber,
        presetsActive,
        presetsSaveAs,
        presetsCurrentSettingsBasedOn,
        presetsLoadToCurrent,
        presetsName0,
        presetsName1,
        presetsName2,
        presetsName3,
        presetsName4,
        presetsName5,
        presetsName6,
        presetsName7,
        delayAudioSDIOutGang,
        delayAudioAESOutGang,
        eventPrimaryPowermissingSNMP,
        eventRedundantPowermissingSNMP,
        eventFanFailureSNMP,
        eventReferenceNoInputSNMP,
        eventSDIInput1NoInputSNMP,
        eventCouldnotlocktoReferenceSNMP,
        eventCouldnotlocktoSDIInput1SNMP,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END