-- Machine generated MIB file, do not edit!
--
-- MIB file for PVD5806-B-D, type code 07.D6, software label 619
-- Generated on Tuesday, 09-Aug-16 11:41:28 UTC
-- CVS $Id: PVD5806-B-D_07d6_sw619.mib,v 1.6 2016/08/09 11:41:30 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs contain
-- unpublished proprietary information written by LYNX Technik AG and
-- are protected by Federal copyright law. They may not be disclosed
-- to third parties or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--
PVD5806-B-D-07d6-sw619-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
mib-modules, products,
FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;
pvd5806-b-d-07d6-sw619 MODULE-IDENTITY
LAST-UPDATED "201608091141Z"
ORGANIZATION "LYNX Technik AG"
CONTACT-INFO "LYNX Technik AG
Brunnenweg 3
64331 Weiterstadt
http://www.lynx-technik.com
mailto:support@lynx-technik.com"
DESCRIPTION "MIB module definition for PVD5806-B-D, type code 07.D6, software label 619"
REVISION "201608091141Z"
DESCRIPTION "Generated by LYNX Asset Database"
::= { mib-modules 2006619 }
pvd5806-b-d-07d6 OBJECT-IDENTITY
STATUS current
DESCRIPTION "LYNX device type PVD5806-B-D"
::= { products 2006 }
sw619 OBJECT-IDENTITY
STATUS current
DESCRIPTION "Software label 619"
::= { pvd5806-b-d-07d6 619 }
-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unknown(0),
black(1),
green(2),
yellow(3),
red(4)
}
TypeFactoryReset ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
press(0)
}
TypeReferenceLock ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
lockToRefIn(0),
lockToSDI1(1)
}
TypeReferenceStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
invalid(1),
n525(2),
n625(3),
n720p60(4),
n720p5994(5),
n720p50(6),
n720p30(7),
n720p2997(8),
n720p25(9),
n720p24(10),
n720p2398(11),
n1080i60(12),
n1080i5994(13),
n1080i50(14),
n1080p60(15),
n1080p5994(16),
n1080p50(17),
n1080p30(18),
n1080p2997(19),
n1080p25(20),
n1080p24(21),
n1080p2398(22),
n1080psF30(23),
n1080psF2997(24),
n1080psF25(25),
n1080psF24(26),
n1080psF2398(27)
}
TypeReferenceSource ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
externBoard(0),
internRack(1)
}
TypeFreqPreselect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
evenFrequencies(0),
oddFrequencies(1),
followLastRefInput(2)
}
TypeFreq ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
evenFreq(0),
oddFreq(1),
evenFreqX(2)
}
TypeGPIFunc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
freezeInput1(1),
freezeInput2(2),
freezeBothInputs(3),
switchUserPresets(4)
}
TypeSyncMode1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
frameSync(0),
lineSyncH(1),
lineSyncV(2)
}
TypeInputFreezeSDI1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freezeOnTRSError(0),
transparentForTRSErrors(1),
forceFreeze(2)
}
TypeConv3ControlMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
manual(0),
aFDAutomated(1),
wSSAutomated(2),
vIAutomated(3)
}
TypeConv3AspectInSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n43(0),
n169(1)
}
TypeConv3FormatOut ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n52543(0),
n525169(1),
n62543(2),
n625169(3),
n525(4),
n625(5),
n720p60(6),
n720p5994(7),
n720p50(8),
n720p30(9),
n720p2997(10),
n720p25(11),
n720p24(12),
n720p2398(13),
n1080i60(14),
n1080i5994(15),
n1080i50(16),
n1080p30(17),
n1080p2997(18),
n1080p25(19),
n1080p24(20),
n1080p2398(21),
n1080psF24(22),
n1080psF2398(23),
n1080p60(24),
n1080p5994(25),
n1080p50(26),
n1080psF30(27),
n1080psF2997(28),
n1080psF25(29)
}
TypeConv3StatusOut ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
invalid(0),
n525(1),
n625(2),
n720p60(3),
n720p5994(4),
n720p50(5),
n720p30(6),
n720p2997(7),
n720p25(8),
n720p24(9),
n720p2398(10),
n1080i60(11),
n1080i5994(12),
n1080i50(13),
n1080p60(14),
n1080p5994(15),
n1080p50(16),
n1080p30(17),
n1080p2997(18),
n1080p25(19),
n1080p24(20),
n1080p2398(21),
n1080psF30(22),
n1080psF2997(23),
n1080psF25(24),
n1080psF24(25),
n1080psF2398(26)
}
TypeConv3Mode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
pillarbox43Letterbox169(0),
centerCut(1),
n149Conversion(2),
stretchToFill(3),
custom(4)
}
TypeConv3MetaAFDInStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
present(1)
}
TypeConv3MetaCCCDPOutStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
present(1)
}
TypeConv3MetaCCCDPSourcePrio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
s334CDP(0),
s334RAW(1),
line21(2)
}
TypeConv3MetaCCCDPSourcePrio2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
s334CDP(1),
s334RAW(2),
line21(3)
}
TypeConv3MetaTCLTCSourcePrio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
aTCLTC(0),
aTCVITC(1),
dVITCA(2),
dVITCB(3)
}
TypeConv3MetaTCLTCSourcePrio2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
aTCLTC(1),
aTCVITC(2),
dVITCA(3),
dVITCB(4)
}
TypeConv3MetaTCDVITCInStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
present(1),
presentX(2),
presentXX(3)
}
TypeConv3MetaTCDVITCADestination625 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n6(0),
n7(1),
n8(2),
n9(3),
n10(4),
n11(5),
n12(6),
n13(7),
n14(8),
n15(9),
n16(10),
n17(11),
n18(12),
n19(13),
n20(14),
n21(15),
n22(16)
}
TypeConv3MetaTXTEncoderMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
wST625Only(1),
s2031WST(2),
oP47SDP(3)
}
TypeConv3MetaTXTLinesSelectionMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
automatic(0),
manual(1)
}
TypeConv3MetaField1Overflow ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
no(0),
yes(1)
}
TypeConv3MetaSMPTE2020Status ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
methodA(1),
methodB(2)
}
TypeConv3ModeAutoARto169 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
boxed(0),
cut(1),
stretch(2)
}
TypeConv3InsertAFDFullFrame169 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n1000(0),
n1010(1)
}
TypeConv3ModeAutoFallback ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
useLastValidFormatDescr(0),
useManualSettings(1)
}
TypeSDIIn1TXTDecoderMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
autoSelect(0),
wST625Only(1),
s2031WST(2),
oP47SDP(3)
}
TypeSDIIn1TCDVITCASource625 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
auto(0),
n6(1),
n7(2),
n8(3),
n9(4),
n10(5),
n11(6),
n12(7),
n13(8),
n14(9),
n15(10),
n16(11),
n17(12),
n18(13),
n19(14),
n20(15),
n21(16),
n22(17)
}
TypeOut1Assign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
input1(0),
hiQConverter(1)
}
TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
black(0),
red(1),
green(2),
blue(3),
cyan(4),
magenta(5),
yellow(6),
white(7),
n15Grey(8),
eQPath(9),
pLLPath(10),
eQPLLPath(11),
n75Colorbar(12),
colorbarOverRed(13)
}
TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n525(0),
n625(1),
n720p60(2),
n720p5994(3),
n720p50(4),
n720p30(5),
n720p2997(6),
n720p25(7),
n720p24(8),
n720p2398(9),
n1080i60(10),
n1080i5994(11),
n1080i50(12),
n1080p30(13),
n1080p2997(14),
n1080p25(15),
n1080p24(16),
n1080p2398(17),
n1080psF24(18),
n1080psF2398(19),
n1080p60(20),
n1080p5994(21),
n1080p50(22),
n1080psF30(23),
n1080psF2997(24),
n1080psF25(25),
followLastInput(26)
}
TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freeze(0),
black(1),
testPattern(2)
}
TypeOut1ModifyPsF ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
pToPsf(1),
psfToP(2)
}
TypeInputStatusAES1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
async(1),
ok(2)
}
TypeSourceInternAudio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
aES1(0),
aES2(1),
aES3(2),
aES4(3),
sDI11(4),
sDI12(5),
sDI13(6),
sDI14(7),
sDI15(8),
sDI16(9),
sDI17(10),
sDI18(11)
}
TypeSourceInternAudioDirect11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDI11(0),
sDI12(1),
sDI13(2),
sDI14(3),
sDI15(4),
sDI16(5),
sDI17(6),
sDI18(7)
}
TypeAudioMute1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
norm(0),
mute(1)
}
TypeAudioInvert1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
norm(0),
inv(1)
}
TypeAudioSilence1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
silence(0),
ok(1)
}
TypeAudioOverload1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
ok(0),
overload(1)
}
TypeBits11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n20Bit(0),
n24Bit(1)
}
TypeSourceAudioOutAES1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
stream1L(0),
stream1R(1),
stream2L(2),
stream2R(3),
stream3L(4),
stream3R(5),
stream4L(6),
stream4R(7),
stream5L(8),
stream5R(9),
stream6L(10),
stream6R(11),
stream7L(12),
stream7R(13),
stream8L(14),
stream8R(15),
stream9L(16),
stream9R(17),
stream10L(18),
stream10R(19),
stream11L(20),
stream11R(21),
stream12L(22),
stream12R(23),
stream13L(24),
stream13R(25),
stream14L(26),
stream14R(27),
stream15L(28),
stream15R(29),
stream16L(30),
stream16R(31),
stream17L(32),
stream17R(33),
stream18L(34),
stream18R(35),
stream19L(36),
stream19R(37),
stream20L(38),
stream20R(39),
muteTimedByRefL(40),
muteTimedByRefR(41),
stream21L(42),
stream21R(43),
stream22L(44),
stream22R(45),
stream23L(46),
stream23R(47),
stream24L(48),
stream24R(49),
muteTimedBySDI1L(50),
muteTimedBySDI1R(51)
}
TypeSourceAudioOutMUX11L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
stream1L(0),
stream1R(1),
stream2L(2),
stream2R(3),
stream3L(4),
stream3R(5),
stream4L(6),
stream4R(7),
stream5L(8),
stream5R(9),
stream6L(10),
stream6R(11),
stream7L(12),
stream7R(13),
stream8L(14),
stream8R(15),
stream9L(16),
stream9R(17),
stream10L(18),
stream10R(19),
stream11L(20),
stream11R(21),
stream12L(22),
stream12R(23),
stream13L(24),
stream13R(25),
stream14L(26),
stream14R(27),
stream15L(28),
stream15R(29),
stream16L(30),
stream16R(31),
stream17L(32),
stream17R(33),
stream18L(34),
stream18R(35),
stream19L(36),
stream19R(37),
stream20L(38),
stream20R(39),
muteTimedByRefL(40),
muteTimedByRefR(41)
}
TypeOut1StatusGroup1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
present(0),
none(1)
}
TypeOut1DeleteGroup1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
keep(0),
del(1)
}
TypeDelayPulseAssign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDIOut1(0),
sDIOut2(1)
}
TypeDeembPhaseSyncVerify1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
on(0),
off(1)
}
TypePresetsGPIOn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
current(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeGenLockStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unlocked(0),
locked(1)
}
TypeAudioContentSDI11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
automatic(0),
pCMAudio(1),
dolbyE(2),
nonPCMData(3)
}
TypeAudioContentStatusSDI11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
pCMAudio(1),
dolbyE(2),
nonPCMData(3)
}
TypeOut1MetaAFDLine ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
n8(1),
n9(2),
n10(3),
n11(4),
n12(5),
n13(6),
n14(7),
n15(8),
n16(9),
n17(10),
n18(11),
n19(12),
n20(13),
n21(14),
n22(15),
n23(16),
n24(17),
n25(18),
n26(19),
n27(20),
n28(21),
n29(22),
n30(23),
n31(24),
n32(25),
n33(26),
n34(27),
n35(28),
n36(29),
n37(30),
n38(31),
n39(32),
n40(33),
n41(34)
}
TypeOut1MetaATCLTCLocation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
vanc(0),
hanc(1)
}
TypeSDIIn1StatusAFD ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
n0010LetterboxTopImageInA43Frame(1),
n0011Letterbox149ImageInA43Frame(2),
n0100169LetterboxCenterImageInA43Frame(3),
n1000FullFrameImageInA43Frame(4),
n1001FullFrameImageInA43Frame(5),
n1010169LetterboxImageVerticallyCenteredInA43Frame(6),
n1011149LetterboxImageVerticallyCenteredInA43Frame(7),
n110143ImageShootProtect149InA43Frame(8),
n1110169LetterboxImageShootProtect149InA43Frame(9),
n1111169LetterboxImageShootProtect43InA43Frame(10),
n0010169FullFrameImageInA169Frame(11),
n0011149PillarboxImageInA169Frame(12),
n0100169LetterboxCenterImageInA169Frame(13),
n1000FullFrameImageInA169Frame(14),
n1001PillarboxImageInA169Frame(15),
n1010Protected169FullFrameImageInA169Frame(16),
n1011149PillarboxImageInA169Frame(17),
n110143PillarboxImageShootProtect149InA169Frame(18),
n1110169ImageShootProtect149InA169Frame(19),
n1111169ImageShootProtect43InA169Frame(20)
}
TypeSDIIn1StatusWSS ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
fullFormat43(1),
box149Center(2),
box149Top(3),
box169Center(4),
box169Top(5),
box169CenterX(6),
fullFormat169CenterAndProtected149(7),
fullFormat169Anamorphic(8)
}
TypeSDIIn1StatusVI ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
n52543(1),
n62543(2),
n525169(3),
n625169(4)
}
TypeSDIIn1AFDLine ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
n8(1),
n9(2),
n10(3),
n11(4),
n12(5),
n13(6),
n14(7),
n15(8),
n16(9),
n17(10),
n18(11),
n19(12),
n20(13),
n21(14),
n22(15),
n23(16),
n24(17),
n25(18),
n26(19),
n27(20),
n28(21),
n29(22),
n30(23),
n31(24),
n32(25),
n33(26),
n34(27),
n35(28),
n36(29),
n37(30),
n38(31),
n39(32),
n40(33),
n41(34)
}
TypeSDIIn1StatusFormatReactOnChange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
delayed(0),
quick(1)
}
TypeOut1DelayMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
framesLinesPixels(0),
milliSeconds(1)
}
TypeOut1FreezeMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freezeField1(0),
freezeField2(1),
freezeFrame(2),
testPattern(3)
}
TypeAudioDolbyETiming1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDIOut1(0),
sDIOut2(1),
aESOut(2),
none(3)
}
TypeConv3COCOMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
gainOffset(0),
peakBlack(1)
}
TypePresetsSaveAs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
nA(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeClipHeadroomLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n100(0),
n103(1),
n105(2),
n107(3)
}
TypeVideoDelayTrackingAESOut1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
sDIOut1(1),
sDIOut2(2)
}
TypeSDIIn1FormatPsF ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
auto(0),
forcePsFFormat(1),
forceInterlacedFormat(2)
}
TypeEventReferenceNoInputSNMP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
onOnly(1),
offOnly(2),
onOff(3)
}
-- Parameter definitions
typeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LYNX product type name"
::= { paramEntry 1 }
displayName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
::= { paramEntry 2 }
position OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
::= { paramEntry 3 }
uptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Connection time of the device to this UI (in seconds)"
::= { paramEntry 4 }
type OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device type code"
::= { paramEntry 5 }
version OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device version information"
::= { paramEntry 6 }
statusColor OBJECT-TYPE
SYNTAX TypeStatusColor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
::= { paramEntry 7 }
statusColorRGB OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
::= { paramEntry 8 }
statusText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current status text (OK or error-details)"
::= { paramEntry 9 }
factoryReset OBJECT-TYPE
SYNTAX TypeFactoryReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
::= { paramEntry 10 }
lock OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock Device"
::= { paramEntry 11 }
locate OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
::= { paramEntry 12 }
eventReferenceNoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: Reference No Input"
::= { paramEntry 14 }
eventSDIInput1NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: SDI Input 1 No Input"
::= { paramEntry 15 }
eventSDIInput2NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: SDI Input 2 No Input"
::= { paramEntry 16 }
eventFanFailure OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: Fan Failure"
::= { paramEntry 17 }
eventHighTemperature OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: High Temperature"
::= { paramEntry 18 }
eventCouldnotlocktoSDIInput1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: Could not lock to SDI Input 1"
::= { paramEntry 19 }
eventCouldnotlocktoSDIInput2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: Could not lock to SDI Input 2"
::= { paramEntry 20 }
eventCouldnotlocktoReference OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: Could not lock to Reference"
::= { paramEntry 21 }
eventAESInput1NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 1 No Input"
::= { paramEntry 22 }
eventAESInput2NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 2 No Input"
::= { paramEntry 23 }
eventAESInput3NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 3 No Input"
::= { paramEntry 24 }
eventAESInput4NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 4 No Input"
::= { paramEntry 25 }
eventAESInput1asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 1 asynchronous"
::= { paramEntry 26 }
eventAESInput2asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 2 asynchronous"
::= { paramEntry 27 }
eventAESInput3asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 3 asynchronous"
::= { paramEntry 28 }
eventAESInput4asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 4 asynchronous"
::= { paramEntry 29 }
channel2CoupleTo1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI-Output Channel 2: couple all selections to channel 1"
::= { paramEntry 34 }
referenceLock OBJECT-TYPE
SYNTAX TypeReferenceLock
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock all outputs to one of *RefIn *SDI1In *SDI2In"
::= { paramEntry 35 }
referenceStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of Reference Input"
::= { paramEntry 36 }
referenceSource OBJECT-TYPE
SYNTAX TypeReferenceSource
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
::= { paramEntry 37 }
freqPreselect OBJECT-TYPE
SYNTAX TypeFreqPreselect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the frequency domain for the complete device (inputs, reference and outputs)"
::= { paramEntry 38 }
freq OBJECT-TYPE
SYNTAX TypeFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
::= { paramEntry 39 }
gPIFunc OBJECT-TYPE
SYNTAX TypeGPIFunc
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify influence of GPI input"
::= { paramEntry 40 }
syncMode1 OBJECT-TYPE
SYNTAX TypeSyncMode1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Synchronization Mode for SDI Channel 1"
::= { paramEntry 41 }
inputStatusSDI1 OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of SDI input channel 1"
::= { paramEntry 42 }
inputFreezeSDI1 OBJECT-TYPE
SYNTAX TypeInputFreezeSDI1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
::= { paramEntry 43 }
syncSDIIn1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed).
This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.
NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path."
::= { paramEntry 44 }
conv3ControlMode OBJECT-TYPE
SYNTAX TypeConv3ControlMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select control mode of converter 3"
::= { paramEntry 45 }
conv3AspectInSelect OBJECT-TYPE
SYNTAX TypeConv3AspectInSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Aspect Ratio of Input signal - Converter 3
The auto setting will be interpreted as:
- 16:9 (HDTV)
- 4:3 (SDTV)"
::= { paramEntry 46 }
conv3AspectIn OBJECT-TYPE
SYNTAX TypeConv3AspectInSelect
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Aspect Ratio of Input signal - Converter 3"
::= { paramEntry 47 }
conv3FormatOut OBJECT-TYPE
SYNTAX TypeConv3FormatOut
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Signal format of scaler output"
::= { paramEntry 48 }
conv3StatusOut OBJECT-TYPE
SYNTAX TypeConv3StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of output - Converter 3"
::= { paramEntry 49 }
conv3Mode OBJECT-TYPE
SYNTAX TypeConv3Mode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Conversion mode of Converter 3"
::= { paramEntry 50 }
conv3AdvancedSettings OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Activate advanced settings from HiQ Scaler"
::= { paramEntry 51 }
conv3OutInsertAFD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Active format description into the video data from HiQ Scaler"
::= { paramEntry 52 }
conv3OutInsertVI OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Video Index into the video data from HiQ Scaler"
::= { paramEntry 53 }
conv3OutInsertWSS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insert Wide Screen Signaling into the video data from HiQ Scaler"
::= { paramEntry 54 }
conv3StatusIn OBJECT-TYPE
SYNTAX TypeConv3StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 3"
::= { paramEntry 55 }
conv3CropHpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start cutout (crop) from input image at this H position (pixel)"
::= { paramEntry 56 }
conv3CropVpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start cutout (crop) from input image at this V position (lines)"
::= { paramEntry 57 }
conv3CropHsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: cutout (crop) from input image this many pixels"
::= { paramEntry 58 }
conv3CropVsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: cutout (crop) from input image this many lines"
::= { paramEntry 59 }
conv3InsertHpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start insertion of source-cutout into output at this H position (pixel)"
::= { paramEntry 60 }
conv3InsertVpos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: start insertion of source-cutout into output at this V position (lines)"
::= { paramEntry 61 }
conv3InsertHsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: insert source-cutout into output in this many pixels"
::= { paramEntry 62 }
conv3InsertVsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HiQ Converter: insert source-cutout into output in this many lines"
::= { paramEntry 63 }
conv3MotionAdaptive OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Motion adaptive filtering / de-interlacing"
::= { paramEntry 64 }
conv3NRGeneral OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "general level of noise reduction "
::= { paramEntry 65 }
conv3NRBlockArtifact OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "level of block artifact reduction"
::= { paramEntry 66 }
conv3NRMosquito OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "level of mosquito noise reduction"
::= { paramEntry 67 }
conv3DetailLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "level for detail enhancement"
::= { paramEntry 68 }
conv3DetailThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "threshold for detail enhancement"
::= { paramEntry 69 }
conv3MetaAdvancedSettings OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Activate advanced Meta Data settings of converter 3"
::= { paramEntry 70 }
conv3MetaCCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Close Caption to default for converter 3"
::= { paramEntry 71 }
conv3MetaTCSourceDefaultPriorities OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set source priority for insertion of Time Code to default for converter 3"
::= { paramEntry 72 }
conv3MetaAFDInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AFD detection on input of converter 3"
::= { paramEntry 73 }
conv3MetaVIInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VI detection on input of converter 3"
::= { paramEntry 74 }
conv3MetaWSSInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "WSS detection on input of converter 3"
::= { paramEntry 75 }
conv3MetaCCCDPOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at output of converter 3"
::= { paramEntry 76 }
conv3MetaCCCDPInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at input of converter 3"
::= { paramEntry 77 }
conv3MetaCCCDPInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3"
::= { paramEntry 78 }
conv3MetaCCCDPSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 79 }
conv3MetaCCCDPSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 80 }
conv3MetaCCCDPSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 81 }
conv3MetaCCRAWOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at output of converter 3"
::= { paramEntry 82 }
conv3MetaCCRAWInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at input of converter 3"
::= { paramEntry 83 }
conv3MetaCCRAWInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in S334 RAW transport packet (containing CEA-608 data) into output of converter 3"
::= { paramEntry 84 }
conv3MetaCCRAWSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 85 }
conv3MetaCCRAWSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 86 }
conv3MetaCCRAWSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as S334 RAW transport packet (containing CEA-608 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 87 }
conv3MetaCCL21OutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Insertion Status of CloseCaptions as Line 21 (containing CEA-608 data) at output of converter 3"
::= { paramEntry 88 }
conv3MetaCCL21InStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of CloseCaptions as Line 21 (containing CEA-608 data) at input of converter 3"
::= { paramEntry 89 }
conv3MetaCCL21Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of CloseCaptions in Line 21 (containing CEA-608 data) into output of converter 3"
::= { paramEntry 90 }
conv3MetaCCL21SourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 91 }
conv3MetaCCL21SourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 92 }
conv3MetaCCL21SourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for CloseCaptions to be inserted as Line 21 transport packet (containing CEA-608 data) into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 93 }
conv3MetaTCLTCInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-LTC at input of converter 3"
::= { paramEntry 94 }
conv3MetaTCLTCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-LTC into output of converter 3"
::= { paramEntry 95 }
conv3MetaTCLTCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 96 }
conv3MetaTCLTCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-LTC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 97 }
conv3MetaTCLTCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-LTC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 98 }
conv3MetaTCVITCInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as ATC-VITC at input of converter 3"
::= { paramEntry 99 }
conv3MetaTCVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as ATC-VITC into output of converter 3"
::= { paramEntry 100 }
conv3MetaTCVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 101 }
conv3MetaTCVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as ATC-VITC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 102 }
conv3MetaTCVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as ATC-VITC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 103 }
conv3MetaTCDVITCInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of TimeCode as DVITC at input of converter 3"
::= { paramEntry 104 }
conv3MetaTCDVITCInsertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of TimeCode as DVITC into output of converter 3"
::= { paramEntry 105 }
conv3MetaTCDVITCSourcePrio1 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 1 Source-channel for TimeCode to be inserted as DVITC into output of converter 3. If the specified source channel is not available, priority 2 is relevant."
::= { paramEntry 106 }
conv3MetaTCDVITCSourcePrio2 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 2 Source-channel for TimeCode to be inserted as DVITC into output of converter 3. If Priority 1 Source-Channel is not available, this selection is relevant. If the specified source channel is not available, priority 3 is relevant."
::= { paramEntry 107 }
conv3MetaTCDVITCSourcePrio3 OBJECT-TYPE
SYNTAX TypeConv3MetaTCLTCSourcePrio2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority 3 Source-Channel for TimeCode to be inserted as DVITC into output of converter 3. If Priority 2 Source-Channel is not available, this selection is relevant."
::= { paramEntry 108 }
conv3MetaTCLTCOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-LTC on output of converter 3"
::= { paramEntry 109 }
conv3MetaTCVITCOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as ATC-VITC on output of converter 3"
::= { paramEntry 110 }
conv3MetaTCDVITCAOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-A on output of converter 3"
::= { paramEntry 111 }
conv3MetaTCDVITCBOutStatus OBJECT-TYPE
SYNTAX TypeConv3MetaCCCDPOutStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Insertion status of TimeCode as DVITC-B on output of converter 3"
::= { paramEntry 112 }
conv3MetaTCDVITCADestination625 OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 3 (for even frequency standards)"
::= { paramEntry 113 }
conv3MetaTCDVITCBDestination625 OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 3 (for even frequency standards)"
::= { paramEntry 114 }
conv3MetaTCDVITCADestination525 OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-A at output of converter 3 (for odd frequency standards)"
::= { paramEntry 115 }
conv3MetaTCDVITCBDestination525 OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCADestination625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Line for insertion of TimeCode as DVITC-B at output of converter 3 (for odd frequency standards)"
::= { paramEntry 116 }
conv3MetaTCDVITCADetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-A TimeCode has been detected in the input of converter 3"
::= { paramEntry 117 }
conv3MetaTCDVITCBDetectedSrcLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the DVITC-B TimeCode has been detected in the input of converter 3"
::= { paramEntry 118 }
conv3MetaTCVITCDetectedDVITCLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information on the video line in which the incoming VITC shall be inserted into the output of converter 3, when it is encoded as DVITC."
::= { paramEntry 119 }
conv3MetaTCDVITCAutomatic OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable automatic selection of DVITC line for insertion on output of converter 3"
::= { paramEntry 120 }
conv3MetaTXTWSTInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as WST at input of converter 3"
::= { paramEntry 121 }
conv3MetaTXTS2031InStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as S2031 transport packet at input of converter 3"
::= { paramEntry 122 }
conv3MetaTXTOP47InStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Teletext as OP47 Subtitling Distribution Packet at input of converter 3"
::= { paramEntry 123 }
conv3MetaTXTEncoderMode OBJECT-TYPE
SYNTAX TypeConv3MetaTXTEncoderMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext Encoder Settings of converter 3"
::= { paramEntry 124 }
conv3MetaTXTLinesSelectionMode OBJECT-TYPE
SYNTAX TypeConv3MetaTXTLinesSelectionMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext lines selection mode of converter 3"
::= { paramEntry 125 }
conv3MetaField1Overflow OBJECT-TYPE
SYNTAX TypeConv3MetaField1Overflow
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 1 at output of converter 3"
::= { paramEntry 132 }
conv3MetaField2Overflow OBJECT-TYPE
SYNTAX TypeConv3MetaField1Overflow
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays yes if some meta-data packages could not be inserted into field 2 at output of converter 3"
::= { paramEntry 133 }
conv3MetaSMPTE2020Status OBJECT-TYPE
SYNTAX TypeConv3MetaSMPTE2020Status
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence status of Meta Data SMPTE 2020 transport packet at input of converter 3"
::= { paramEntry 134 }
conv3MetaSMPTE2020Insertion OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of Meta Data SMPTE 2020 transport packet at output of converter 3"
::= { paramEntry 135 }
conv3ModeAutoARto169 OBJECT-TYPE
SYNTAX TypeConv3ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 16:9 mode for Converter 3"
::= { paramEntry 136 }
conv3ModeAutoARto43 OBJECT-TYPE
SYNTAX TypeConv3ModeAutoARto169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Aspect Ratio to 4:3 mode for Converter 3"
::= { paramEntry 137 }
conv3InsertAFDFullFrame169 OBJECT-TYPE
SYNTAX TypeConv3InsertAFDFullFrame169
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AFD Full Frame 16:9 mode for Converter 3"
::= { paramEntry 138 }
conv3ModeAutoFallback OBJECT-TYPE
SYNTAX TypeConv3ModeAutoFallback
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Auto Fallback mode for Converter 3"
::= { paramEntry 139 }
sDIIn1TXTWSTInStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as WST at SDI Input 1"
::= { paramEntry 140 }
sDIIn1TXTS2031InStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as S2031 transport packet at SDI Input 1"
::= { paramEntry 141 }
sDIIn1TXTOP47InStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of Teletext as OP47 transport packet at SDI Input 1"
::= { paramEntry 142 }
sDIIn1TXTDecoderMode OBJECT-TYPE
SYNTAX TypeSDIIn1TXTDecoderMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Teletext Decoder Settings at SDI Input 1"
::= { paramEntry 143 }
sDIIn1TCDVITCASource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 1 (for even-frequency standards)"
::= { paramEntry 144 }
sDIIn1TCDVITCBSource625 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 1 (for even-frequency standards)"
::= { paramEntry 145 }
sDIIn1TCDVITCASource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-A in SDI input 1 (for odd-frequency standards)"
::= { paramEntry 146 }
sDIIn1TCDVITCBSource525 OBJECT-TYPE
SYNTAX TypeSDIIn1TCDVITCASource625
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Video Line from which to read (decode) DVITC-B in SDI input 1 (for odd-frequency standards)"
::= { paramEntry 147 }
sDIIn1CCCDPStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) at SDI Input 1"
::= { paramEntry 148 }
sDIIn1CCRAWStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) at SDI Input 1"
::= { paramEntry 149 }
sDIIn1CCL21Status OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of CloseCaptions as Line 21 (containing CEA-608 data) at SDI Input 1"
::= { paramEntry 150 }
sDIIn1TCLTCStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-LTC at SDI Input 1"
::= { paramEntry 151 }
sDIIn1TCVITCStatus OBJECT-TYPE
SYNTAX TypeConv3MetaAFDInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as ATC-VITC at SDI Input 1"
::= { paramEntry 152 }
sDIIn1TCDVITCStatus OBJECT-TYPE
SYNTAX TypeConv3MetaTCDVITCInStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence Status of TimeCode as DVITC at SDI Input 1"
::= { paramEntry 153 }
out1Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 1 to Input (direct) or to one of the Converters"
::= { paramEntry 154 }
out1Standard OBJECT-TYPE
SYNTAX TypeConv3StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 1"
::= { paramEntry 155 }
out2Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 2 to Input (direct) or to one of the Converters"
::= { paramEntry 156 }
out2Standard OBJECT-TYPE
SYNTAX TypeConv3StatusOut
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 2"
::= { paramEntry 157 }
out1DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in frames. Combine with Out1/DelayLines and Out1/DelayPixel for total delay"
::= { paramEntry 158 }
out1DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in lines. Combine with Out1/DelayFrames and Out1/DelayPixel for total delay"
::= { paramEntry 159 }
out1DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in pixel. Combine with Out1/DelayFrames and Out1/DelayLines for total delay"
::= { paramEntry 160 }
out1DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 user delay in milliseconds."
::= { paramEntry 161 }
out1ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable aperture correction"
::= { paramEntry 162 }
out1ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: aperture correction level"
::= { paramEntry 163 }
out1HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable H-Blanking"
::= { paramEntry 164 }
out1VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable V-Blanking"
::= { paramEntry 165 }
out1Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust Video Gain"
::= { paramEntry 166 }
out1Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Saturation"
::= { paramEntry 167 }
out1BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
::= { paramEntry 168 }
out1Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Hue"
::= { paramEntry 169 }
out1TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 170 }
out1TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 171 }
out1TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable preselected test pattern"
::= { paramEntry 172 }
out1IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 173 }
out1ModifyPsF OBJECT-TYPE
SYNTAX TypeOut1ModifyPsF
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.
This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
::= { paramEntry 174 }
out2DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in frames. Combine with Out2/DelayLines and Out2/DelayPixel for total delay"
::= { paramEntry 175 }
out2DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in lines. Combine with Out2/DelayFrames and Out2/DelayPixel for total delay"
::= { paramEntry 176 }
out2DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in pixel. Combine with Out2/DelayFrames and Out2/DelayLines for total delay"
::= { paramEntry 177 }
out2DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 user delay in milliseconds."
::= { paramEntry 178 }
out2ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable aperture correction"
::= { paramEntry 179 }
out2ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: aperture correction level"
::= { paramEntry 180 }
out2HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable H-Blanking"
::= { paramEntry 181 }
out2VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable V-Blanking"
::= { paramEntry 182 }
out2Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust Video Gain"
::= { paramEntry 183 }
out2Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Saturation"
::= { paramEntry 184 }
out2BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video black level (in IRE)"
::= { paramEntry 185 }
out2Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Hue"
::= { paramEntry 186 }
out2TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 187 }
out2TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out2/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 188 }
out2TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable preselected test pattern"
::= { paramEntry 189 }
out2IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 190 }
out2ModifyPsF OBJECT-TYPE
SYNTAX TypeOut1ModifyPsF
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.
This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
::= { paramEntry 191 }
inputStatusAES1 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 1"
::= { paramEntry 192 }
inputStatusAES2 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 2"
::= { paramEntry 193 }
inputStatusAES3 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 3"
::= { paramEntry 194 }
inputStatusAES4 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 4"
::= { paramEntry 195 }
sourceInternAudio1 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 1"
::= { paramEntry 196 }
sourceInternAudio2 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 2"
::= { paramEntry 197 }
sourceInternAudio3 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 3"
::= { paramEntry 198 }
sourceInternAudio4 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 4"
::= { paramEntry 199 }
sourceInternAudio5 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 5"
::= { paramEntry 200 }
sourceInternAudio6 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 6"
::= { paramEntry 201 }
sourceInternAudio7 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 7"
::= { paramEntry 202 }
sourceInternAudio8 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 8"
::= { paramEntry 203 }
sourceInternAudio9 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 9"
::= { paramEntry 204 }
sourceInternAudio10 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 10"
::= { paramEntry 205 }
sourceInternAudio11 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 11"
::= { paramEntry 206 }
sourceInternAudio12 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 12"
::= { paramEntry 207 }
sourceInternAudio13 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 13"
::= { paramEntry 208 }
sourceInternAudio14 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 14"
::= { paramEntry 209 }
sourceInternAudio15 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 15"
::= { paramEntry 210 }
sourceInternAudio16 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 16"
::= { paramEntry 211 }
sourceInternAudio17 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 17"
::= { paramEntry 212 }
sourceInternAudio18 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 18"
::= { paramEntry 213 }
sourceInternAudio19 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 19"
::= { paramEntry 214 }
sourceInternAudio20 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 20"
::= { paramEntry 215 }
sourceInternAudioDirect11 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 21"
::= { paramEntry 216 }
sourceInternAudioDirect12 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 22"
::= { paramEntry 217 }
sourceInternAudioDirect13 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 23"
::= { paramEntry 218 }
sourceInternAudioDirect14 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 24"
::= { paramEntry 219 }
sRC1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 1 ON/OFF"
::= { paramEntry 220 }
sRC2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 2 ON/OFF"
::= { paramEntry 221 }
sRC3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 3 ON/OFF"
::= { paramEntry 222 }
sRC4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 4 ON/OFF"
::= { paramEntry 223 }
sRC5 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 5 ON/OFF"
::= { paramEntry 224 }
sRC6 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 6 ON/OFF"
::= { paramEntry 225 }
sRC7 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 7 ON/OFF"
::= { paramEntry 226 }
sRC8 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 8 ON/OFF"
::= { paramEntry 227 }
audioGain1L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 1 L"
::= { paramEntry 228 }
audioMute1L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 1L"
::= { paramEntry 229 }
audioInvert1L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 1L"
::= { paramEntry 230 }
audioSilence1L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 1L"
::= { paramEntry 231 }
audioOverload1L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 1 L"
::= { paramEntry 232 }
audioGain1R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 1 R"
::= { paramEntry 233 }
audioMute1R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 1R"
::= { paramEntry 234 }
audioInvert1R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 1R"
::= { paramEntry 235 }
audioSilence1R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 1R"
::= { paramEntry 236 }
audioOverload1R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 1 R"
::= { paramEntry 237 }
audioMixDown1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 238 }
audioGain2L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 2 L"
::= { paramEntry 239 }
audioMute2L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 2L"
::= { paramEntry 240 }
audioInvert2L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 2L"
::= { paramEntry 241 }
audioSilence2L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 2L"
::= { paramEntry 242 }
audioOverload2L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 2 L"
::= { paramEntry 243 }
audioGain2R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 2 R"
::= { paramEntry 244 }
audioMute2R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 2R"
::= { paramEntry 245 }
audioInvert2R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 2R"
::= { paramEntry 246 }
audioSilence2R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 2R"
::= { paramEntry 247 }
audioOverload2R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 2 R"
::= { paramEntry 248 }
audioMixDown2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 249 }
audioGain3L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 3 L"
::= { paramEntry 250 }
audioMute3L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 3L"
::= { paramEntry 251 }
audioInvert3L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 3L"
::= { paramEntry 252 }
audioSilence3L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 3L"
::= { paramEntry 253 }
audioOverload3L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 3 L"
::= { paramEntry 254 }
audioGain3R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 3 R"
::= { paramEntry 255 }
audioMute3R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 3R"
::= { paramEntry 256 }
audioInvert3R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 3R"
::= { paramEntry 257 }
audioSilence3R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 3R"
::= { paramEntry 258 }
audioOverload3R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 3 R"
::= { paramEntry 259 }
audioMixDown3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 260 }
audioGain4L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 4 L"
::= { paramEntry 261 }
audioMute4L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 4L"
::= { paramEntry 262 }
audioInvert4L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 4L"
::= { paramEntry 263 }
audioSilence4L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 4L"
::= { paramEntry 264 }
audioOverload4L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 4 L"
::= { paramEntry 265 }
audioGain4R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 4 R"
::= { paramEntry 266 }
audioMute4R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 4R"
::= { paramEntry 267 }
audioInvert4R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 4R"
::= { paramEntry 268 }
audioSilence4R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 4R"
::= { paramEntry 269 }
audioOverload4R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 4 R"
::= { paramEntry 270 }
audioMixDown4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 271 }
audioGain5L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 5 L"
::= { paramEntry 272 }
audioMute5L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 5L"
::= { paramEntry 273 }
audioInvert5L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 5L"
::= { paramEntry 274 }
audioSilence5L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 5L"
::= { paramEntry 275 }
audioOverload5L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 5 L"
::= { paramEntry 276 }
audioGain5R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 5 R"
::= { paramEntry 277 }
audioMute5R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 5R"
::= { paramEntry 278 }
audioInvert5R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 5R"
::= { paramEntry 279 }
audioSilence5R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 5R"
::= { paramEntry 280 }
audioOverload5R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 5 R"
::= { paramEntry 281 }
audioMixDown5 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 282 }
audioGain6L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 6 L"
::= { paramEntry 283 }
audioMute6L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 6L"
::= { paramEntry 284 }
audioInvert6L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 6L"
::= { paramEntry 285 }
audioSilence6L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 6L"
::= { paramEntry 286 }
audioOverload6L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 6 L"
::= { paramEntry 287 }
audioGain6R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 6 R"
::= { paramEntry 288 }
audioMute6R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 6R"
::= { paramEntry 289 }
audioInvert6R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 6R"
::= { paramEntry 290 }
audioSilence6R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 6R"
::= { paramEntry 291 }
audioOverload6R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 6 R"
::= { paramEntry 292 }
audioMixDown6 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 293 }
audioGain7L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 7 L"
::= { paramEntry 294 }
audioMute7L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 7L"
::= { paramEntry 295 }
audioInvert7L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 7L"
::= { paramEntry 296 }
audioSilence7L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 7L"
::= { paramEntry 297 }
audioOverload7L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 7 L"
::= { paramEntry 298 }
audioGain7R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 7 R"
::= { paramEntry 299 }
audioMute7R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 7R"
::= { paramEntry 300 }
audioInvert7R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 7R"
::= { paramEntry 301 }
audioSilence7R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 7R"
::= { paramEntry 302 }
audioOverload7R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 7 R"
::= { paramEntry 303 }
audioMixDown7 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 304 }
audioGain8L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 8 L"
::= { paramEntry 305 }
audioMute8L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 8L"
::= { paramEntry 306 }
audioInvert8L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 8L"
::= { paramEntry 307 }
audioSilence8L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 8L"
::= { paramEntry 308 }
audioOverload8L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 8 L"
::= { paramEntry 309 }
audioGain8R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 8 R"
::= { paramEntry 310 }
audioMute8R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 8R"
::= { paramEntry 311 }
audioInvert8R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 8R"
::= { paramEntry 312 }
audioSilence8R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 8R"
::= { paramEntry 313 }
audioOverload8R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 8 R"
::= { paramEntry 314 }
audioMixDown8 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 315 }
audioGain9L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 9 L"
::= { paramEntry 316 }
audioMute9L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 9L"
::= { paramEntry 317 }
audioInvert9L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 9L"
::= { paramEntry 318 }
audioSilence9L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 9L"
::= { paramEntry 319 }
audioOverload9L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 9 L"
::= { paramEntry 320 }
audioGain9R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 9 R"
::= { paramEntry 321 }
audioMute9R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 9R"
::= { paramEntry 322 }
audioInvert9R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 9R"
::= { paramEntry 323 }
audioSilence9R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 9R"
::= { paramEntry 324 }
audioOverload9R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 9 R"
::= { paramEntry 325 }
audioMixDown9 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 326 }
audioGain10L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 10 L"
::= { paramEntry 327 }
audioMute10L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 10L"
::= { paramEntry 328 }
audioInvert10L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 10L"
::= { paramEntry 329 }
audioSilence10L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 10L"
::= { paramEntry 330 }
audioOverload10L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 10 L"
::= { paramEntry 331 }
audioGain10R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 10 R"
::= { paramEntry 332 }
audioMute10R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 10R"
::= { paramEntry 333 }
audioInvert10R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 10R"
::= { paramEntry 334 }
audioSilence10R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 10R"
::= { paramEntry 335 }
audioOverload10R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 10 R"
::= { paramEntry 336 }
audioMixDown10 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 337 }
audioGain11L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 11 L"
::= { paramEntry 338 }
audioMute11L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 11L"
::= { paramEntry 339 }
audioInvert11L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 11L"
::= { paramEntry 340 }
audioSilence11L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 11L"
::= { paramEntry 341 }
audioOverload11L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 11 L"
::= { paramEntry 342 }
audioGain11R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 11 R"
::= { paramEntry 343 }
audioMute11R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 11R"
::= { paramEntry 344 }
audioInvert11R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 11R"
::= { paramEntry 345 }
audioSilence11R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 11R"
::= { paramEntry 346 }
audioOverload11R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 11 R"
::= { paramEntry 347 }
audioMixDown11 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 348 }
audioGain12L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 12 L"
::= { paramEntry 349 }
audioMute12L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 12L"
::= { paramEntry 350 }
audioInvert12L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 12L"
::= { paramEntry 351 }
audioSilence12L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 12L"
::= { paramEntry 352 }
audioOverload12L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 12 L"
::= { paramEntry 353 }
audioGain12R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 12 R"
::= { paramEntry 354 }
audioMute12R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 12R"
::= { paramEntry 355 }
audioInvert12R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 12R"
::= { paramEntry 356 }
audioSilence12R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 12R"
::= { paramEntry 357 }
audioOverload12R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 12 R"
::= { paramEntry 358 }
audioMixDown12 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 359 }
audioGain13L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 13 L"
::= { paramEntry 360 }
audioMute13L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 13L"
::= { paramEntry 361 }
audioInvert13L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 13L"
::= { paramEntry 362 }
audioSilence13L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 13L"
::= { paramEntry 363 }
audioOverload13L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 13 L"
::= { paramEntry 364 }
audioGain13R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 13 R"
::= { paramEntry 365 }
audioMute13R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 13R"
::= { paramEntry 366 }
audioInvert13R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 13R"
::= { paramEntry 367 }
audioSilence13R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 13R"
::= { paramEntry 368 }
audioOverload13R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 13 R"
::= { paramEntry 369 }
audioMixDown13 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 370 }
audioGain14L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 14 L"
::= { paramEntry 371 }
audioMute14L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 14L"
::= { paramEntry 372 }
audioInvert14L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 14L"
::= { paramEntry 373 }
audioSilence14L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 14L"
::= { paramEntry 374 }
audioOverload14L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 14 L"
::= { paramEntry 375 }
audioGain14R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 14 R"
::= { paramEntry 376 }
audioMute14R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 14R"
::= { paramEntry 377 }
audioInvert14R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 14R"
::= { paramEntry 378 }
audioSilence14R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 14R"
::= { paramEntry 379 }
audioOverload14R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 14 R"
::= { paramEntry 380 }
audioMixDown14 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 381 }
audioGain15L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 15 L"
::= { paramEntry 382 }
audioMute15L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 15L"
::= { paramEntry 383 }
audioInvert15L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 15L"
::= { paramEntry 384 }
audioSilence15L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 15L"
::= { paramEntry 385 }
audioOverload15L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 15 L"
::= { paramEntry 386 }
audioGain15R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 15 R"
::= { paramEntry 387 }
audioMute15R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 15R"
::= { paramEntry 388 }
audioInvert15R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 15R"
::= { paramEntry 389 }
audioSilence15R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 15R"
::= { paramEntry 390 }
audioOverload15R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 15 R"
::= { paramEntry 391 }
audioMixDown15 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 392 }
audioGain16L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 16 L"
::= { paramEntry 393 }
audioMute16L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 16L"
::= { paramEntry 394 }
audioInvert16L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 16L"
::= { paramEntry 395 }
audioSilence16L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 16L"
::= { paramEntry 396 }
audioOverload16L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 16 L"
::= { paramEntry 397 }
audioGain16R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 16 R"
::= { paramEntry 398 }
audioMute16R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 16R"
::= { paramEntry 399 }
audioInvert16R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 16R"
::= { paramEntry 400 }
audioSilence16R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 16R"
::= { paramEntry 401 }
audioOverload16R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 16 R"
::= { paramEntry 402 }
audioMixDown16 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 403 }
audioGain17L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 17 L"
::= { paramEntry 404 }
audioMute17L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 17L"
::= { paramEntry 405 }
audioInvert17L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 17L"
::= { paramEntry 406 }
audioSilence17L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 17L"
::= { paramEntry 407 }
audioOverload17L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 17 L"
::= { paramEntry 408 }
audioGain17R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 17 R"
::= { paramEntry 409 }
audioMute17R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 17R"
::= { paramEntry 410 }
audioInvert17R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 17R"
::= { paramEntry 411 }
audioSilence17R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 17R"
::= { paramEntry 412 }
audioOverload17R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 17 R"
::= { paramEntry 413 }
audioMixDown17 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 414 }
audioGain18L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 18 L"
::= { paramEntry 415 }
audioMute18L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 18L"
::= { paramEntry 416 }
audioInvert18L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 18L"
::= { paramEntry 417 }
audioSilence18L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 18L"
::= { paramEntry 418 }
audioOverload18L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 18 L"
::= { paramEntry 419 }
audioGain18R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 18 R"
::= { paramEntry 420 }
audioMute18R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 18R"
::= { paramEntry 421 }
audioInvert18R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 18R"
::= { paramEntry 422 }
audioSilence18R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 18R"
::= { paramEntry 423 }
audioOverload18R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 18 R"
::= { paramEntry 424 }
audioMixDown18 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 425 }
audioGain19L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 19 L"
::= { paramEntry 426 }
audioMute19L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 19L"
::= { paramEntry 427 }
audioInvert19L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 19L"
::= { paramEntry 428 }
audioSilence19L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 19L"
::= { paramEntry 429 }
audioOverload19L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 19 L"
::= { paramEntry 430 }
audioGain19R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 19 R"
::= { paramEntry 431 }
audioMute19R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 19R"
::= { paramEntry 432 }
audioInvert19R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 19R"
::= { paramEntry 433 }
audioSilence19R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 19R"
::= { paramEntry 434 }
audioOverload19R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 19 R"
::= { paramEntry 435 }
audioMixDown19 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 436 }
audioGain20L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 20 L"
::= { paramEntry 437 }
audioMute20L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 20L"
::= { paramEntry 438 }
audioInvert20L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 20L"
::= { paramEntry 439 }
audioSilence20L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 20L"
::= { paramEntry 440 }
audioOverload20L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 20 L"
::= { paramEntry 441 }
audioGain20R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 20 R"
::= { paramEntry 442 }
audioMute20R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 20R"
::= { paramEntry 443 }
audioInvert20R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 20R"
::= { paramEntry 444 }
audioSilence20R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 20R"
::= { paramEntry 445 }
audioOverload20R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 20 R"
::= { paramEntry 446 }
audioMixDown20 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 447 }
bits11 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 1"
::= { paramEntry 448 }
bits12 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 2"
::= { paramEntry 449 }
bits13 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 3"
::= { paramEntry 450 }
bits14 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 4"
::= { paramEntry 451 }
bits21 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 1"
::= { paramEntry 452 }
bits22 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 2"
::= { paramEntry 453 }
bits23 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 3"
::= { paramEntry 454 }
bits24 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 4"
::= { paramEntry 455 }
sourceAudioOutAES1L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 1L"
::= { paramEntry 456 }
sourceAudioOutAES1R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 1R"
::= { paramEntry 457 }
sourceAudioOutAES2L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 2L"
::= { paramEntry 458 }
sourceAudioOutAES2R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 2R"
::= { paramEntry 459 }
sourceAudioOutAES3L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 3L"
::= { paramEntry 460 }
sourceAudioOutAES3R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 3R"
::= { paramEntry 461 }
sourceAudioOutAES4L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 4L"
::= { paramEntry 462 }
sourceAudioOutAES4R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 4R"
::= { paramEntry 463 }
sourceAudioOutMUX11L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 1 (group 1.1), L"
::= { paramEntry 464 }
sourceAudioOutMUX11R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 1 (group 1.1), R"
::= { paramEntry 465 }
sourceAudioOutMUX12L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 2 (group 1.2), L"
::= { paramEntry 466 }
sourceAudioOutMUX12R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 2 (group 1.2), R"
::= { paramEntry 467 }
sourceAudioOutMUX13L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 3 (group 2.1), L"
::= { paramEntry 468 }
sourceAudioOutMUX13R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 3 (group 2.1), R"
::= { paramEntry 469 }
sourceAudioOutMUX14L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 4 (group 2.2), L"
::= { paramEntry 470 }
sourceAudioOutMUX14R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 4 (group 2.2), R"
::= { paramEntry 471 }
sourceAudioOutMUX15L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 5 (group 3.1), L"
::= { paramEntry 472 }
sourceAudioOutMUX15R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 5 (group 3.1), R"
::= { paramEntry 473 }
sourceAudioOutMUX16L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 6 (group 3.2), L"
::= { paramEntry 474 }
sourceAudioOutMUX16R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 6 (group 3.2), R"
::= { paramEntry 475 }
sourceAudioOutMUX17L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 7 (group 4.1), L"
::= { paramEntry 476 }
sourceAudioOutMUX17R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 7 (group 4.1), R"
::= { paramEntry 477 }
sourceAudioOutMUX18L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 8 (group 4.2), L"
::= { paramEntry 478 }
sourceAudioOutMUX18R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 8 (group 4.2), R"
::= { paramEntry 479 }
sourceAudioOutMUX21L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 1 (group 1.1), L"
::= { paramEntry 480 }
sourceAudioOutMUX21R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 1 (group 1.1), R"
::= { paramEntry 481 }
sourceAudioOutMUX22L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 2 (group 1.2), L"
::= { paramEntry 482 }
sourceAudioOutMUX22R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 2 (group 1.2), R"
::= { paramEntry 483 }
sourceAudioOutMUX23L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 3 (group 2.1), L"
::= { paramEntry 484 }
sourceAudioOutMUX23R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 3 (group 2.1), R"
::= { paramEntry 485 }
sourceAudioOutMUX24L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 4 (group 2.2), L"
::= { paramEntry 486 }
sourceAudioOutMUX24R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 4 (group 2.2), R"
::= { paramEntry 487 }
sourceAudioOutMUX25L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 5 (group 3.1), L"
::= { paramEntry 488 }
sourceAudioOutMUX25R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 5 (group 3.1), R"
::= { paramEntry 489 }
sourceAudioOutMUX26L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 6 (group 3.2), L"
::= { paramEntry 490 }
sourceAudioOutMUX26R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 6 (group 3.2), R"
::= { paramEntry 491 }
sourceAudioOutMUX27L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 7 (group 4.1), L"
::= { paramEntry 492 }
sourceAudioOutMUX27R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 7 (group 4.1), R"
::= { paramEntry 493 }
sourceAudioOutMUX28L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 8 (group 4.2), L"
::= { paramEntry 494 }
sourceAudioOutMUX28R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 8 (group 4.2), R"
::= { paramEntry 495 }
out1EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 1"
::= { paramEntry 496 }
out1EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 1"
::= { paramEntry 497 }
out1EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 1"
::= { paramEntry 498 }
out1EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 1"
::= { paramEntry 499 }
out2EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 2"
::= { paramEntry 500 }
out2EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 2"
::= { paramEntry 501 }
out2EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 2"
::= { paramEntry 502 }
out2EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 2"
::= { paramEntry 503 }
out1StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 1"
::= { paramEntry 504 }
out1StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 1"
::= { paramEntry 505 }
out1StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 1"
::= { paramEntry 506 }
out1StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 1"
::= { paramEntry 507 }
out2StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 2"
::= { paramEntry 508 }
out2StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 2"
::= { paramEntry 509 }
out2StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 2"
::= { paramEntry 510 }
out2StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 2"
::= { paramEntry 511 }
out1DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 512 }
out1DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 513 }
out1DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 514 }
out1DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 515 }
out2DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 516 }
out2DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 517 }
out2DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 518 }
out2DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 519 }
temperatureMAX1617Int OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PCB temperature (MAX1617) in C"
::= { paramEntry 522 }
temperatureMAX1617Ext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FPGA temperature in C"
::= { paramEntry 523 }
audioDelayAESIn1 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 1"
::= { paramEntry 524 }
audioDelayAESIn2 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 2"
::= { paramEntry 525 }
audioDelayAESIn3 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 3"
::= { paramEntry 526 }
audioDelayAESIn4 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 4"
::= { paramEntry 527 }
audioDelayAESOut1 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 1"
::= { paramEntry 528 }
audioDelayAESOut2 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 2"
::= { paramEntry 529 }
audioDelayAESOut3 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 3"
::= { paramEntry 530 }
audioDelayAESOut4 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 4"
::= { paramEntry 531 }
audioDelaySDI11 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 11"
::= { paramEntry 532 }
audioDelaySDI12 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 12"
::= { paramEntry 533 }
audioDelaySDI13 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 13"
::= { paramEntry 534 }
audioDelaySDI14 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 14"
::= { paramEntry 535 }
audioDelaySDI15 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 15"
::= { paramEntry 536 }
audioDelaySDI16 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 16"
::= { paramEntry 537 }
audioDelaySDI17 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 17"
::= { paramEntry 538 }
audioDelaySDI18 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 18"
::= { paramEntry 539 }
audioDelaySDIOut11 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 11"
::= { paramEntry 540 }
audioDelaySDIOut12 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 12"
::= { paramEntry 541 }
audioDelaySDIOut13 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 13"
::= { paramEntry 542 }
audioDelaySDIOut14 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 14"
::= { paramEntry 543 }
audioDelaySDIOut15 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 15"
::= { paramEntry 544 }
audioDelaySDIOut16 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 16"
::= { paramEntry 545 }
audioDelaySDIOut17 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 17"
::= { paramEntry 546 }
audioDelaySDIOut18 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 18"
::= { paramEntry 547 }
audioDelaySDIOut21 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 21"
::= { paramEntry 548 }
audioDelaySDIOut22 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 22"
::= { paramEntry 549 }
audioDelaySDIOut23 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 23"
::= { paramEntry 550 }
audioDelaySDIOut24 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 24"
::= { paramEntry 551 }
audioDelaySDIOut25 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 25"
::= { paramEntry 552 }
audioDelaySDIOut26 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 26"
::= { paramEntry 553 }
audioDelaySDIOut27 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 27"
::= { paramEntry 554 }
audioDelaySDIOut28 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 28"
::= { paramEntry 555 }
delayPulseAssign OBJECT-TYPE
SYNTAX TypeDelayPulseAssign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign the Delay Pulse Output to one of the SDI Outputs.
The generated Delay Pulse will represent the exact amount of time that the video signal on this output has been delayed from SDI-Input to SDI-Output."
::= { paramEntry 557 }
deembPhaseSync1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
All running channels are reset if one channel is added/removed.
(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)
If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
::= { paramEntry 558 }
deembPhaseSyncVerify1 OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
::= { paramEntry 559 }
presetsGPIOn OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 560 }
presetsGPIOff OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 561 }
genLockStatus OBJECT-TYPE
SYNTAX TypeGenLockStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lock-Status of LMH1982"
::= { paramEntry 562 }
inputToRefDelay1H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Horizontal delay between Input 1 and Reference"
::= { paramEntry 563 }
inputToRefDelay1V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Vertical delay between Input 1 and Reference"
::= { paramEntry 564 }
inputToRefDelay2H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "InputToRefDelay2H"
::= { paramEntry 565 }
inputToRefDelay2V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "InputToRefDelay2V"
::= { paramEntry 566 }
audioContentSDI11 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.1"
::= { paramEntry 567 }
audioContentSDI12 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.2"
::= { paramEntry 568 }
audioContentSDI13 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.3"
::= { paramEntry 569 }
audioContentSDI14 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.4"
::= { paramEntry 570 }
audioContentSDI15 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.5"
::= { paramEntry 571 }
audioContentSDI16 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.6"
::= { paramEntry 572 }
audioContentSDI17 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.7"
::= { paramEntry 573 }
audioContentSDI18 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.8"
::= { paramEntry 574 }
audioContentStatusSDI11 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.1"
::= { paramEntry 575 }
audioContentStatusSDI12 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.2"
::= { paramEntry 576 }
audioContentStatusSDI13 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.3"
::= { paramEntry 577 }
audioContentStatusSDI14 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.4"
::= { paramEntry 578 }
audioContentStatusSDI15 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.5"
::= { paramEntry 579 }
audioContentStatusSDI16 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.6"
::= { paramEntry 580 }
audioContentStatusSDI17 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.7"
::= { paramEntry 581 }
audioContentStatusSDI18 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.8"
::= { paramEntry 582 }
audioContentAES1 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 1"
::= { paramEntry 583 }
audioContentAES2 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 2"
::= { paramEntry 584 }
audioContentAES3 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 3"
::= { paramEntry 585 }
audioContentAES4 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 4"
::= { paramEntry 586 }
audioContentStatusAES1 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 1"
::= { paramEntry 587 }
audioContentStatusAES2 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 2"
::= { paramEntry 588 }
audioContentStatusAES3 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 3"
::= { paramEntry 589 }
audioContentStatusAES4 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 4"
::= { paramEntry 590 }
out1MetaLineSelectionMode OBJECT-TYPE
SYNTAX TypeConv3MetaTXTLinesSelectionMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify mode of operation for selecting ANC-lines for insertion of MetaData into Output 1. By default (automatic) the selections will be chosen according to appropriate standard recommendations. In manual mode, you are fully responsible for compliance with the current video standard."
::= { paramEntry 591 }
out1MetaS352Insertion OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of SMPTE 352 (VPID) at Output 1"
::= { paramEntry 592 }
out1MetaAFDLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of AFD data packet into Output 1"
::= { paramEntry 593 }
out1MetaCCCDPLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into Output 1"
::= { paramEntry 594 }
out1MetaCCRAWLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) into Output 1"
::= { paramEntry 595 }
out1MetaS2020Line OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of SMPTE2020 data packets into Output 1"
::= { paramEntry 596 }
out1MetaS2031WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of SMPTE2031 WST (teletext) data packets into Output 1. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 597 }
out1MetaOP47WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of OP47 WST (teletext) data packets into Output 1. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 598 }
out1MetaATCLTCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-LTC data packets into Output 1"
::= { paramEntry 599 }
out1MetaATCVITCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-VITC data packets into Output 1"
::= { paramEntry 600 }
out1MetaATCLTCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-LTC data packets are inserted as HANC or VANC packets at Output 1"
::= { paramEntry 601 }
out1MetaATCVITCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-VITC data packets are inserted as HANC or VANC packets at Output 1"
::= { paramEntry 602 }
out2MetaLineSelectionMode OBJECT-TYPE
SYNTAX TypeConv3MetaTXTLinesSelectionMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify mode of operation for selecting ANC-lines for insertion of MetaData into Output 2. By default (automatic) the selections will be chosen according to appropriate standard recommendations. In manual mode, you are fully responsible for compliance with the current video standard."
::= { paramEntry 604 }
out2MetaS352Insertion OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable insertion of SMPTE 352 (VPID) at Output 2"
::= { paramEntry 605 }
out2MetaAFDLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of AFD data packet into Output 2"
::= { paramEntry 606 }
out2MetaCCCDPLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) into Output 2"
::= { paramEntry 607 }
out2MetaCCRAWLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) into Output 2"
::= { paramEntry 608 }
out2MetaS2020Line OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of SMPTE2020 data packets into Output 2"
::= { paramEntry 609 }
out2MetaS2031WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of SMPTE2031 WST (teletext) data packets into Output 2. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 610 }
out2MetaOP47WSTLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify first video line for insertion of OP47 WST (teletext) data packets into Output 2. There are multiple such packets per video field/frame. Usually, the amount of data requires more than one video line for insertion of all data packets. This parameter specifies the first line for insertion of such data packets. Please expect addtional data packets in the following line also"
::= { paramEntry 611 }
out2MetaATCLTCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-LTC data packets into Output 2"
::= { paramEntry 612 }
out2MetaATCVITCLine OBJECT-TYPE
SYNTAX TypeOut1MetaAFDLine
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify video line for insertion of ATC-VITC data packets into Output 2"
::= { paramEntry 613 }
out2MetaATCLTCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-LTC data packets are inserted as HANC or VANC packets at Output 2"
::= { paramEntry 614 }
out2MetaATCVITCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify if ATC-VITC data packets are inserted as HANC or VANC packets at Output 2"
::= { paramEntry 615 }
sDIIn1StatusAFD OBJECT-TYPE
SYNTAX TypeSDIIn1StatusAFD
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected AFD code on SDI input 1"
::= { paramEntry 617 }
sDIIn1StatusWSS OBJECT-TYPE
SYNTAX TypeSDIIn1StatusWSS
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected WSS code on SDI input 1"
::= { paramEntry 618 }
sDIIn1StatusVI OBJECT-TYPE
SYNTAX TypeSDIIn1StatusVI
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detected VI code on SDI input 1"
::= { paramEntry 619 }
sDIIn1AFDLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of AFD data packet on SDI input 1"
::= { paramEntry 620 }
sDIIn1CCCDPLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of CloseCaptions as S334 CDP transport packet (containing CEA-608 and CEA-708 data) on SDI input 1"
::= { paramEntry 621 }
sDIIn1CCRAWLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of CloseCaptions as S334 RAW transport packet (containing CEA-608 data) on SDI input 1"
::= { paramEntry 622 }
sDIIn1S2020Line OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of SMPTE2020 data packets on SDI input 1"
::= { paramEntry 623 }
sDIIn1S2031WSTFirstLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection first video line of SMPTE2031 WST (teletext) data packets on SDI input 1."
::= { paramEntry 624 }
sDIIn1S2031WSTLastLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection last video line of SMPTE2031 WST (teletext) data packets on SDI input 1."
::= { paramEntry 625 }
sDIIn1OP47WSTFirstLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection first video line of OP47 WST (teletext) data packets on SDI input 1"
::= { paramEntry 626 }
sDIIn1OP47WSTLastLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection last video line of OP47 WST (teletext) data packets on SDI input 1"
::= { paramEntry 627 }
sDIIn1ATCLTCLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of ATC-LTC data packets on SDI input 1"
::= { paramEntry 628 }
sDIIn1ATCVITCLine OBJECT-TYPE
SYNTAX TypeSDIIn1AFDLine
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video line detection of ATC-VITC data packets on SDI input 1"
::= { paramEntry 629 }
sDIIn1ATCLTCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection if ATC-LTC data packets are present as HANC or VANC packets on SDI input 1"
::= { paramEntry 630 }
sDIIn1ATCVITCLocation OBJECT-TYPE
SYNTAX TypeOut1MetaATCLTCLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection if ATC-VITC data packets are present as HANC or VANC packets on SDI input 1"
::= { paramEntry 631 }
sDIIn1StatusFormatReactOnChange OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to CHANGE of format description (AFD, WSS, VI) in SDI Input 1 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable."
::= { paramEntry 633 }
sDIIn1StatusFormatReactOnLoss OBJECT-TYPE
SYNTAX TypeSDIIn1StatusFormatReactOnChange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "specify if a reaction to LOSS of format description (AFD, WSS, VI) in SDI Input 1 will follow as quickly as possible or delayed. A delayed reaction may be preferred in an environment where the incoming formate description signal is disturbed or instable"
::= { paramEntry 634 }
snapToReferenceFrameLength OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to ON, the minimum total video processing time is set to be equal to the length of one video-frame of the reference standard. E.g. synchronizing a 720p50 SDI to a 625 REF will delay the SDI by minimum 40ms (instead of 20ms).This mode can only be used with synchronous SDI inputs.The default value is OFF."
::= { paramEntry 635 }
out1ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 636 }
out2ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 637 }
out1FixedProcTime OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: Set the video processing time to a fixed value, independent of the current mode of operation"
::= { paramEntry 638 }
out2FixedProcTime OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: Set the video processing time to a fixed value, independent of the current mode of operation"
::= { paramEntry 639 }
out1DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 1"
::= { paramEntry 640 }
out2DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 2"
::= { paramEntry 641 }
out1FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: specify freeze mode if input is missing."
::= { paramEntry 642 }
out2FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: specify freeze mode if input is missing."
::= { paramEntry 643 }
audioDolbyETiming1 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 644 }
audioDolbyETiming2 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 645 }
audioDolbyETiming3 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 646 }
audioDolbyETiming4 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 647 }
conv3COCOGainG OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gain adjustment for GREEN channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 648 }
conv3COCOGainB OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gain adjustment for BLUE channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 649 }
conv3COCOGainR OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gain adjustment for RED channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 650 }
conv3COCOOffsetG OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Offset adjustment for GREEN channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 651 }
conv3COCOOffsetB OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Offset adjustment for BLUE channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 652 }
conv3COCOOffsetR OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Offset adjustment for RED channel as part of the ColorCorrection stage in the LYNX HiQ Scaler."
::= { paramEntry 653 }
conv3COCOGangGains OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all color correction gain values (modify all gain controls synchronously)"
::= { paramEntry 654 }
conv3COCOGangOffsets OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all color correction offset values
(modify all offset controls synchronously)"
::= { paramEntry 655 }
conv3COCOMode OBJECT-TYPE
SYNTAX TypeConv3COCOMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify operation mode for the ColorCorrection stage in the LYNX HiQ Scaler.
- Gain & Offset (default) : Offset is applied as linear addition to the signal
- Peak & Black: Black Adjustment is applied to signal non-linearily. This avoids overlevels resp. clipping."
::= { paramEntry 656 }
out1TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 1"
::= { paramEntry 657 }
out2TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 2"
::= { paramEntry 658 }
aSCA OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This function will take control over all internal audio crossbars and embedders.
For all incoming audio streams, it will automatically select the appropriate synchronization method according to their content (PCM-audio, DolbyE, other non-PCM data). Audio-Outputs will be routed so they contain the same audio content as the input.
See user-manual for further details."
::= { paramEntry 659 }
conv3LockImgConvSettings OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Prevent from automatic reconfiguration of image converter settings in HiQ Scaler.
Otherwise (OFF) the converter will automatically re-configure the settings for output video format and scaling windows on a change of the detected signal frequency.
Enabling this option disables the manual selection of output format and image cropping and positioning. The default setting is OFF."
::= { paramEntry 660 }
presetsNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "maximum number of user presets"
::= { paramEntry 661 }
presetsActive OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select the Active Preset.
NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka Current) and make the required modifications there."
::= { paramEntry 662 }
presetsSaveAs OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
::= { paramEntry 663 }
presetsLoadToCurrent OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "loads selected user preset into the current user settings, all actual user changes will be lost"
::= { paramEntry 664 }
presetsName0 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 0"
::= { paramEntry 665 }
presetsName1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 1"
::= { paramEntry 666 }
presetsName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 2"
::= { paramEntry 667 }
presetsName3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 3"
::= { paramEntry 668 }
presetsName4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 4"
::= { paramEntry 669 }
presetsName5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 5"
::= { paramEntry 670 }
presetsName6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 6"
::= { paramEntry 671 }
presetsName7 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 7"
::= { paramEntry 672 }
out1MetaOP47FieldInversion OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Invert the field bit when generating a OP47 WST (teletext) data packet on SDI output 1.
This function can be used to compensate for downstream equipment that interprets the OP47 WST packets using the wrong polarity."
::= { paramEntry 673 }
out2MetaOP47FieldInversion OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Invert the field bit when generating a OP47 WST (teletext) data packet on SDI output 2.
This function can be used to compensate for downstream equipment that interprets the OP47 WST packets using the wrong polarity."
::= { paramEntry 674 }
sDIIn1OP47FieldInversion OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Invert the field bit when interpreting an OP47 WST (teletext) data packet on SDI input 1.
This function can be used to compensate for an inserter of OP47 WST packets that appliesthe field bits with wrong polarity."
::= { paramEntry 675 }
out1MetaTXTEmbedAlternateFrames OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If set to ON, ANC packets containing teletext information (S2031-WST and OP47-WST) will be embedded into every 2nd frame of a fast progressive video stream only.
I.e. every other 2nd video frame will not contain such teletext ANC data. This switch applies only if output 1 is connected to the HiQ Converter delivering a fast progressive video format (> 30fps). The default setting is OFF, which means that every single progressive video frame can contain teletext ANC data."
::= { paramEntry 676 }
out2MetaTXTEmbedAlternateFrames OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If set to ON, ANC packets containing teletext information (S2031-WST and OP47-WST) will be embedded into every 2nd frame of a fast progressive video stream only.
I.e. every other 2nd video frame will not contain such teletext ANC data. This switch applies only if output 2 is connected to the HiQ Converter delivering a fast progressive video format (> 30fps). The default setting is OFF, which means that every single progressive video frame can contain teletext ANC data."
::= { paramEntry 677 }
clipHeadroomLevel OBJECT-TYPE
SYNTAX TypeClipHeadroomLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the level to which the YCrCb output code values are clipped, if enabled.
Clipping has to be enabled per individual SDI output and is disabled by default (parameter OutX/ClipHeadroom). If clipping is enabled for an output, the output code values are clipped to the following levels, as defined by this switch:
- 100% => [64... 940] (Y) / [64...960] (C)
- 103% => [51... 966] (Y) / [51...973] (C)
- 105% => [42... 984] (Y) / [42...982] (C)
- 107% => [33...1001] (Y) / [33...991] (C)
"
::= { paramEntry 678 }
videoDelayTrackingAESOut1 OBJECT-TYPE
SYNTAX TypeVideoDelayTrackingAESOut1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alignment of the audiodelay AES-Out1 to the SDI-Out(1-2) Videosignal"
::= { paramEntry 679 }
videoDelayTrackingAESOut2 OBJECT-TYPE
SYNTAX TypeVideoDelayTrackingAESOut1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alignment of the audiodelay AES-Out2 to the SDI-Out(1-2) Videosignal"
::= { paramEntry 680 }
videoDelayTrackingAESOut3 OBJECT-TYPE
SYNTAX TypeVideoDelayTrackingAESOut1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alignment of the audiodelay AES-Out3 to the SDI-Out(1-2) Videosignal"
::= { paramEntry 681 }
videoDelayTrackingAESOut4 OBJECT-TYPE
SYNTAX TypeVideoDelayTrackingAESOut1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alignment of the audiodelay AES-Out4 to the SDI-Out(1-2) Videosignal"
::= { paramEntry 682 }
out1FrameSyncCompensation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Frame Sync Compensation"
::= { paramEntry 683 }
boardID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "BoardID"
::= { paramEntry 684 }
inputToRefTolerance OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Open a tolerance window in the relative timing between SDI In and REF In.
To be applied for modifying the timing behavior in Framesync mode.When modified to ON, the SDI Input is accepted as aligned to REF even if it arrives up to 12usec later than REF.
See User Manual for details."
::= { paramEntry 685 }
sDIIn1FormatPsF OBJECT-TYPE
SYNTAX TypeSDIIn1FormatPsF
MAX-ACCESS read-write
STATUS current
DESCRIPTION "By default, the decision between interlaced and progressive segmented frame (PsF) input formats is automatically made based on the embedded VPID. Alternatively, this switch allows to declare all interlaced input streams as PsF resp. as interlaced formats (ignoring the VPID)."
::= { paramEntry 686 }
audioDelayAESOutGang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all AES Out Delay values (modify all delay controls synchronously)"
::= { paramEntry 687 }
audioDelaySDIOut1Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 1 Delay values (modify all delay controls synchronously)"
::= { paramEntry 688 }
audioDelaySDIOut2Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 2 Delay values (modify all delay controls synchronously)"
::= { paramEntry 689 }
eventReferenceNoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Reference No Input"
::= { paramEntry 690 }
eventSDIInput1NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: SDI Input 1 No Input"
::= { paramEntry 691 }
eventSDIInput2NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: SDI Input 2 No Input"
::= { paramEntry 692 }
eventFanFailureSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Fan Failure"
::= { paramEntry 693 }
eventHighTemperatureSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: High Temperature"
::= { paramEntry 694 }
eventCouldnotlocktoSDIInput1SNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to SDI Input 1"
::= { paramEntry 695 }
eventCouldnotlocktoSDIInput2SNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to SDI Input 2"
::= { paramEntry 696 }
eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to Reference"
::= { paramEntry 697 }
eventAESInput1NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 1 No Input"
::= { paramEntry 698 }
eventAESInput2NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 2 No Input"
::= { paramEntry 699 }
eventAESInput3NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 3 No Input"
::= { paramEntry 700 }
eventAESInput4NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 4 No Input"
::= { paramEntry 701 }
eventAESInput1asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 1 asynchronous"
::= { paramEntry 702 }
eventAESInput2asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 2 asynchronous"
::= { paramEntry 703 }
eventAESInput3asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 3 asynchronous"
::= { paramEntry 704 }
eventAESInput4asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 4 asynchronous"
::= { paramEntry 705 }
conv3InputStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display signal format of input - Converter 3"
::= { paramEntry 706 }
crossBarAudioIntern OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Mono Crossbar for Internal Audio AES Streams"
::= { paramEntry 707 }
crossBarAudioOutMUX1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 1"
::= { paramEntry 708 }
crossBarAudioOutMUX2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 2"
::= { paramEntry 709 }
crossBarAudioOutExtAES OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for External Audio Out AES"
::= { paramEntry 710 }
conv3InSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Conv 3 Input Image Size (pixels)"
::= { paramEntry 711 }
conv3OutSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Conv 3 Output Image Size (pixels)"
::= { paramEntry 712 }
sNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial Number"
::= { paramEntry 713 }
out3ModifyPsF OBJECT-TYPE
SYNTAX TypeOut1ModifyPsF
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.
This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
::= { paramEntry 714 }
-- Parameter table
paramTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PVD5806-B-D parameters"
::= { sw619 1 }
paramEntry OBJECT-TYPE
SYNTAX ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row in the table of PVD5806-B-D parameters"
INDEX { IMPLIED position }
::= { paramTable 1 }
ParamEntry ::= SEQUENCE {
typeName DisplayString,
displayName DisplayString,
position OCTET STRING,
uptime TimeTicks,
type DisplayString,
version DisplayString,
statusColor TypeStatusColor,
statusColorRGB DisplayString,
statusText DisplayString,
factoryReset TypeFactoryReset,
lock OnOffValue,
locate OnOffValue,
eventReferenceNoInput OnOffValue,
eventSDIInput1NoInput OnOffValue,
eventSDIInput2NoInput OnOffValue,
eventFanFailure OnOffValue,
eventHighTemperature OnOffValue,
eventCouldnotlocktoSDIInput1 OnOffValue,
eventCouldnotlocktoSDIInput2 OnOffValue,
eventCouldnotlocktoReference OnOffValue,
eventAESInput1NoInput OnOffValue,
eventAESInput2NoInput OnOffValue,
eventAESInput3NoInput OnOffValue,
eventAESInput4NoInput OnOffValue,
eventAESInput1asynchronous OnOffValue,
eventAESInput2asynchronous OnOffValue,
eventAESInput3asynchronous OnOffValue,
eventAESInput4asynchronous OnOffValue,
channel2CoupleTo1 OnOffValue,
referenceLock TypeReferenceLock,
referenceStatus TypeReferenceStatus,
referenceSource TypeReferenceSource,
freqPreselect TypeFreqPreselect,
freq TypeFreq,
gPIFunc TypeGPIFunc,
syncMode1 TypeSyncMode1,
inputStatusSDI1 TypeReferenceStatus,
inputFreezeSDI1 TypeInputFreezeSDI1,
syncSDIIn1 OnOffValue,
conv3ControlMode TypeConv3ControlMode,
conv3AspectInSelect TypeConv3AspectInSelect,
conv3AspectIn TypeConv3AspectInSelect,
conv3FormatOut TypeConv3FormatOut,
conv3StatusOut TypeConv3StatusOut,
conv3Mode TypeConv3Mode,
conv3AdvancedSettings OnOffValue,
conv3OutInsertAFD OnOffValue,
conv3OutInsertVI OnOffValue,
conv3OutInsertWSS OnOffValue,
conv3StatusIn TypeConv3StatusOut,
conv3CropHpos Integer32,
conv3CropVpos Integer32,
conv3CropHsize Integer32,
conv3CropVsize Integer32,
conv3InsertHpos Integer32,
conv3InsertVpos Integer32,
conv3InsertHsize Integer32,
conv3InsertVsize Integer32,
conv3MotionAdaptive OnOffValue,
conv3NRGeneral Integer32,
conv3NRBlockArtifact Integer32,
conv3NRMosquito Integer32,
conv3DetailLevel Integer32,
conv3DetailThreshold Integer32,
conv3MetaAdvancedSettings OnOffValue,
conv3MetaCCSourceDefaultPriorities OnOffValue,
conv3MetaTCSourceDefaultPriorities OnOffValue,
conv3MetaAFDInStatus TypeConv3MetaAFDInStatus,
conv3MetaVIInStatus TypeConv3MetaAFDInStatus,
conv3MetaWSSInStatus TypeConv3MetaAFDInStatus,
conv3MetaCCCDPOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaCCCDPInStatus TypeConv3MetaAFDInStatus,
conv3MetaCCCDPInsertion OnOffValue,
conv3MetaCCCDPSourcePrio1 TypeConv3MetaCCCDPSourcePrio1,
conv3MetaCCCDPSourcePrio2 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaCCCDPSourcePrio3 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaCCRAWOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaCCRAWInStatus TypeConv3MetaAFDInStatus,
conv3MetaCCRAWInsertion OnOffValue,
conv3MetaCCRAWSourcePrio1 TypeConv3MetaCCCDPSourcePrio1,
conv3MetaCCRAWSourcePrio2 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaCCRAWSourcePrio3 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaCCL21OutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaCCL21InStatus TypeConv3MetaAFDInStatus,
conv3MetaCCL21Insertion OnOffValue,
conv3MetaCCL21SourcePrio1 TypeConv3MetaCCCDPSourcePrio1,
conv3MetaCCL21SourcePrio2 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaCCL21SourcePrio3 TypeConv3MetaCCCDPSourcePrio2,
conv3MetaTCLTCInStatus TypeConv3MetaAFDInStatus,
conv3MetaTCLTCInsertion OnOffValue,
conv3MetaTCLTCSourcePrio1 TypeConv3MetaTCLTCSourcePrio1,
conv3MetaTCLTCSourcePrio2 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCLTCSourcePrio3 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCVITCInStatus TypeConv3MetaAFDInStatus,
conv3MetaTCVITCInsertion OnOffValue,
conv3MetaTCVITCSourcePrio1 TypeConv3MetaTCLTCSourcePrio1,
conv3MetaTCVITCSourcePrio2 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCVITCSourcePrio3 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCDVITCInStatus TypeConv3MetaTCDVITCInStatus,
conv3MetaTCDVITCInsertion OnOffValue,
conv3MetaTCDVITCSourcePrio1 TypeConv3MetaTCLTCSourcePrio1,
conv3MetaTCDVITCSourcePrio2 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCDVITCSourcePrio3 TypeConv3MetaTCLTCSourcePrio2,
conv3MetaTCLTCOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaTCVITCOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaTCDVITCAOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaTCDVITCBOutStatus TypeConv3MetaCCCDPOutStatus,
conv3MetaTCDVITCADestination625 TypeConv3MetaTCDVITCADestination625,
conv3MetaTCDVITCBDestination625 TypeConv3MetaTCDVITCADestination625,
conv3MetaTCDVITCADestination525 TypeConv3MetaTCDVITCADestination625,
conv3MetaTCDVITCBDestination525 TypeConv3MetaTCDVITCADestination625,
conv3MetaTCDVITCADetectedSrcLine Integer32,
conv3MetaTCDVITCBDetectedSrcLine Integer32,
conv3MetaTCVITCDetectedDVITCLine Integer32,
conv3MetaTCDVITCAutomatic OnOffValue,
conv3MetaTXTWSTInStatus TypeConv3MetaAFDInStatus,
conv3MetaTXTS2031InStatus TypeConv3MetaAFDInStatus,
conv3MetaTXTOP47InStatus TypeConv3MetaAFDInStatus,
conv3MetaTXTEncoderMode TypeConv3MetaTXTEncoderMode,
conv3MetaTXTLinesSelectionMode TypeConv3MetaTXTLinesSelectionMode,
conv3MetaField1Overflow TypeConv3MetaField1Overflow,
conv3MetaField2Overflow TypeConv3MetaField1Overflow,
conv3MetaSMPTE2020Status TypeConv3MetaSMPTE2020Status,
conv3MetaSMPTE2020Insertion OnOffValue,
conv3ModeAutoARto169 TypeConv3ModeAutoARto169,
conv3ModeAutoARto43 TypeConv3ModeAutoARto169,
conv3InsertAFDFullFrame169 TypeConv3InsertAFDFullFrame169,
conv3ModeAutoFallback TypeConv3ModeAutoFallback,
sDIIn1TXTWSTInStatus TypeConv3MetaAFDInStatus,
sDIIn1TXTS2031InStatus TypeConv3MetaAFDInStatus,
sDIIn1TXTOP47InStatus TypeConv3MetaAFDInStatus,
sDIIn1TXTDecoderMode TypeSDIIn1TXTDecoderMode,
sDIIn1TCDVITCASource625 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource625 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCASource525 TypeSDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource525 TypeSDIIn1TCDVITCASource625,
sDIIn1CCCDPStatus TypeConv3MetaAFDInStatus,
sDIIn1CCRAWStatus TypeConv3MetaAFDInStatus,
sDIIn1CCL21Status TypeConv3MetaAFDInStatus,
sDIIn1TCLTCStatus TypeConv3MetaAFDInStatus,
sDIIn1TCVITCStatus TypeConv3MetaAFDInStatus,
sDIIn1TCDVITCStatus TypeConv3MetaTCDVITCInStatus,
out1Assign TypeOut1Assign,
out1Standard TypeConv3StatusOut,
out2Assign TypeOut1Assign,
out2Standard TypeConv3StatusOut,
out1DelayFrames Integer32,
out1DelayLines Integer32,
out1DelayPixel Integer32,
out1DelayMs FixedPointValue3,
out1ApertureEnable OnOffValue,
out1ApertureLevel Integer32,
out1HBlank OnOffValue,
out1VBlank OnOffValue,
out1Gain Integer32,
out1Saturation Integer32,
out1BlackLevel FixedPointValue1,
out1Hue FixedPointValue1,
out1TestPatternSelect TypeOut1TestPatternSelect,
out1TestPatternStd TypeOut1TestPatternStd,
out1TestPatternOn OnOffValue,
out1IfNoInput TypeOut1IfNoInput,
out1ModifyPsF TypeOut1ModifyPsF,
out2DelayFrames Integer32,
out2DelayLines Integer32,
out2DelayPixel Integer32,
out2DelayMs FixedPointValue3,
out2ApertureEnable OnOffValue,
out2ApertureLevel Integer32,
out2HBlank OnOffValue,
out2VBlank OnOffValue,
out2Gain Integer32,
out2Saturation Integer32,
out2BlackLevel FixedPointValue1,
out2Hue FixedPointValue1,
out2TestPatternSelect TypeOut1TestPatternSelect,
out2TestPatternStd TypeOut1TestPatternStd,
out2TestPatternOn OnOffValue,
out2IfNoInput TypeOut1IfNoInput,
out2ModifyPsF TypeOut1ModifyPsF,
inputStatusAES1 TypeInputStatusAES1,
inputStatusAES2 TypeInputStatusAES1,
inputStatusAES3 TypeInputStatusAES1,
inputStatusAES4 TypeInputStatusAES1,
sourceInternAudio1 TypeSourceInternAudio1,
sourceInternAudio2 TypeSourceInternAudio1,
sourceInternAudio3 TypeSourceInternAudio1,
sourceInternAudio4 TypeSourceInternAudio1,
sourceInternAudio5 TypeSourceInternAudio1,
sourceInternAudio6 TypeSourceInternAudio1,
sourceInternAudio7 TypeSourceInternAudio1,
sourceInternAudio8 TypeSourceInternAudio1,
sourceInternAudio9 TypeSourceInternAudio1,
sourceInternAudio10 TypeSourceInternAudio1,
sourceInternAudio11 TypeSourceInternAudio1,
sourceInternAudio12 TypeSourceInternAudio1,
sourceInternAudio13 TypeSourceInternAudio1,
sourceInternAudio14 TypeSourceInternAudio1,
sourceInternAudio15 TypeSourceInternAudio1,
sourceInternAudio16 TypeSourceInternAudio1,
sourceInternAudio17 TypeSourceInternAudio1,
sourceInternAudio18 TypeSourceInternAudio1,
sourceInternAudio19 TypeSourceInternAudio1,
sourceInternAudio20 TypeSourceInternAudio1,
sourceInternAudioDirect11 TypeSourceInternAudioDirect11,
sourceInternAudioDirect12 TypeSourceInternAudioDirect11,
sourceInternAudioDirect13 TypeSourceInternAudioDirect11,
sourceInternAudioDirect14 TypeSourceInternAudioDirect11,
sRC1 OnOffValue,
sRC2 OnOffValue,
sRC3 OnOffValue,
sRC4 OnOffValue,
sRC5 OnOffValue,
sRC6 OnOffValue,
sRC7 OnOffValue,
sRC8 OnOffValue,
audioGain1L FixedPointValue1,
audioMute1L TypeAudioMute1L,
audioInvert1L TypeAudioInvert1L,
audioSilence1L TypeAudioSilence1L,
audioOverload1L TypeAudioOverload1L,
audioGain1R FixedPointValue1,
audioMute1R TypeAudioMute1L,
audioInvert1R TypeAudioInvert1L,
audioSilence1R TypeAudioSilence1L,
audioOverload1R TypeAudioOverload1L,
audioMixDown1 OnOffValue,
audioGain2L FixedPointValue1,
audioMute2L TypeAudioMute1L,
audioInvert2L TypeAudioInvert1L,
audioSilence2L TypeAudioSilence1L,
audioOverload2L TypeAudioOverload1L,
audioGain2R FixedPointValue1,
audioMute2R TypeAudioMute1L,
audioInvert2R TypeAudioInvert1L,
audioSilence2R TypeAudioSilence1L,
audioOverload2R TypeAudioOverload1L,
audioMixDown2 OnOffValue,
audioGain3L FixedPointValue1,
audioMute3L TypeAudioMute1L,
audioInvert3L TypeAudioInvert1L,
audioSilence3L TypeAudioSilence1L,
audioOverload3L TypeAudioOverload1L,
audioGain3R FixedPointValue1,
audioMute3R TypeAudioMute1L,
audioInvert3R TypeAudioInvert1L,
audioSilence3R TypeAudioSilence1L,
audioOverload3R TypeAudioOverload1L,
audioMixDown3 OnOffValue,
audioGain4L FixedPointValue1,
audioMute4L TypeAudioMute1L,
audioInvert4L TypeAudioInvert1L,
audioSilence4L TypeAudioSilence1L,
audioOverload4L TypeAudioOverload1L,
audioGain4R FixedPointValue1,
audioMute4R TypeAudioMute1L,
audioInvert4R TypeAudioInvert1L,
audioSilence4R TypeAudioSilence1L,
audioOverload4R TypeAudioOverload1L,
audioMixDown4 OnOffValue,
audioGain5L FixedPointValue1,
audioMute5L TypeAudioMute1L,
audioInvert5L TypeAudioInvert1L,
audioSilence5L TypeAudioSilence1L,
audioOverload5L TypeAudioOverload1L,
audioGain5R FixedPointValue1,
audioMute5R TypeAudioMute1L,
audioInvert5R TypeAudioInvert1L,
audioSilence5R TypeAudioSilence1L,
audioOverload5R TypeAudioOverload1L,
audioMixDown5 OnOffValue,
audioGain6L FixedPointValue1,
audioMute6L TypeAudioMute1L,
audioInvert6L TypeAudioInvert1L,
audioSilence6L TypeAudioSilence1L,
audioOverload6L TypeAudioOverload1L,
audioGain6R FixedPointValue1,
audioMute6R TypeAudioMute1L,
audioInvert6R TypeAudioInvert1L,
audioSilence6R TypeAudioSilence1L,
audioOverload6R TypeAudioOverload1L,
audioMixDown6 OnOffValue,
audioGain7L FixedPointValue1,
audioMute7L TypeAudioMute1L,
audioInvert7L TypeAudioInvert1L,
audioSilence7L TypeAudioSilence1L,
audioOverload7L TypeAudioOverload1L,
audioGain7R FixedPointValue1,
audioMute7R TypeAudioMute1L,
audioInvert7R TypeAudioInvert1L,
audioSilence7R TypeAudioSilence1L,
audioOverload7R TypeAudioOverload1L,
audioMixDown7 OnOffValue,
audioGain8L FixedPointValue1,
audioMute8L TypeAudioMute1L,
audioInvert8L TypeAudioInvert1L,
audioSilence8L TypeAudioSilence1L,
audioOverload8L TypeAudioOverload1L,
audioGain8R FixedPointValue1,
audioMute8R TypeAudioMute1L,
audioInvert8R TypeAudioInvert1L,
audioSilence8R TypeAudioSilence1L,
audioOverload8R TypeAudioOverload1L,
audioMixDown8 OnOffValue,
audioGain9L FixedPointValue1,
audioMute9L TypeAudioMute1L,
audioInvert9L TypeAudioInvert1L,
audioSilence9L TypeAudioSilence1L,
audioOverload9L TypeAudioOverload1L,
audioGain9R FixedPointValue1,
audioMute9R TypeAudioMute1L,
audioInvert9R TypeAudioInvert1L,
audioSilence9R TypeAudioSilence1L,
audioOverload9R TypeAudioOverload1L,
audioMixDown9 OnOffValue,
audioGain10L FixedPointValue1,
audioMute10L TypeAudioMute1L,
audioInvert10L TypeAudioInvert1L,
audioSilence10L TypeAudioSilence1L,
audioOverload10L TypeAudioOverload1L,
audioGain10R FixedPointValue1,
audioMute10R TypeAudioMute1L,
audioInvert10R TypeAudioInvert1L,
audioSilence10R TypeAudioSilence1L,
audioOverload10R TypeAudioOverload1L,
audioMixDown10 OnOffValue,
audioGain11L FixedPointValue1,
audioMute11L TypeAudioMute1L,
audioInvert11L TypeAudioInvert1L,
audioSilence11L TypeAudioSilence1L,
audioOverload11L TypeAudioOverload1L,
audioGain11R FixedPointValue1,
audioMute11R TypeAudioMute1L,
audioInvert11R TypeAudioInvert1L,
audioSilence11R TypeAudioSilence1L,
audioOverload11R TypeAudioOverload1L,
audioMixDown11 OnOffValue,
audioGain12L FixedPointValue1,
audioMute12L TypeAudioMute1L,
audioInvert12L TypeAudioInvert1L,
audioSilence12L TypeAudioSilence1L,
audioOverload12L TypeAudioOverload1L,
audioGain12R FixedPointValue1,
audioMute12R TypeAudioMute1L,
audioInvert12R TypeAudioInvert1L,
audioSilence12R TypeAudioSilence1L,
audioOverload12R TypeAudioOverload1L,
audioMixDown12 OnOffValue,
audioGain13L FixedPointValue1,
audioMute13L TypeAudioMute1L,
audioInvert13L TypeAudioInvert1L,
audioSilence13L TypeAudioSilence1L,
audioOverload13L TypeAudioOverload1L,
audioGain13R FixedPointValue1,
audioMute13R TypeAudioMute1L,
audioInvert13R TypeAudioInvert1L,
audioSilence13R TypeAudioSilence1L,
audioOverload13R TypeAudioOverload1L,
audioMixDown13 OnOffValue,
audioGain14L FixedPointValue1,
audioMute14L TypeAudioMute1L,
audioInvert14L TypeAudioInvert1L,
audioSilence14L TypeAudioSilence1L,
audioOverload14L TypeAudioOverload1L,
audioGain14R FixedPointValue1,
audioMute14R TypeAudioMute1L,
audioInvert14R TypeAudioInvert1L,
audioSilence14R TypeAudioSilence1L,
audioOverload14R TypeAudioOverload1L,
audioMixDown14 OnOffValue,
audioGain15L FixedPointValue1,
audioMute15L TypeAudioMute1L,
audioInvert15L TypeAudioInvert1L,
audioSilence15L TypeAudioSilence1L,
audioOverload15L TypeAudioOverload1L,
audioGain15R FixedPointValue1,
audioMute15R TypeAudioMute1L,
audioInvert15R TypeAudioInvert1L,
audioSilence15R TypeAudioSilence1L,
audioOverload15R TypeAudioOverload1L,
audioMixDown15 OnOffValue,
audioGain16L FixedPointValue1,
audioMute16L TypeAudioMute1L,
audioInvert16L TypeAudioInvert1L,
audioSilence16L TypeAudioSilence1L,
audioOverload16L TypeAudioOverload1L,
audioGain16R FixedPointValue1,
audioMute16R TypeAudioMute1L,
audioInvert16R TypeAudioInvert1L,
audioSilence16R TypeAudioSilence1L,
audioOverload16R TypeAudioOverload1L,
audioMixDown16 OnOffValue,
audioGain17L FixedPointValue1,
audioMute17L TypeAudioMute1L,
audioInvert17L TypeAudioInvert1L,
audioSilence17L TypeAudioSilence1L,
audioOverload17L TypeAudioOverload1L,
audioGain17R FixedPointValue1,
audioMute17R TypeAudioMute1L,
audioInvert17R TypeAudioInvert1L,
audioSilence17R TypeAudioSilence1L,
audioOverload17R TypeAudioOverload1L,
audioMixDown17 OnOffValue,
audioGain18L FixedPointValue1,
audioMute18L TypeAudioMute1L,
audioInvert18L TypeAudioInvert1L,
audioSilence18L TypeAudioSilence1L,
audioOverload18L TypeAudioOverload1L,
audioGain18R FixedPointValue1,
audioMute18R TypeAudioMute1L,
audioInvert18R TypeAudioInvert1L,
audioSilence18R TypeAudioSilence1L,
audioOverload18R TypeAudioOverload1L,
audioMixDown18 OnOffValue,
audioGain19L FixedPointValue1,
audioMute19L TypeAudioMute1L,
audioInvert19L TypeAudioInvert1L,
audioSilence19L TypeAudioSilence1L,
audioOverload19L TypeAudioOverload1L,
audioGain19R FixedPointValue1,
audioMute19R TypeAudioMute1L,
audioInvert19R TypeAudioInvert1L,
audioSilence19R TypeAudioSilence1L,
audioOverload19R TypeAudioOverload1L,
audioMixDown19 OnOffValue,
audioGain20L FixedPointValue1,
audioMute20L TypeAudioMute1L,
audioInvert20L TypeAudioInvert1L,
audioSilence20L TypeAudioSilence1L,
audioOverload20L TypeAudioOverload1L,
audioGain20R FixedPointValue1,
audioMute20R TypeAudioMute1L,
audioInvert20R TypeAudioInvert1L,
audioSilence20R TypeAudioSilence1L,
audioOverload20R TypeAudioOverload1L,
audioMixDown20 OnOffValue,
bits11 TypeBits11,
bits12 TypeBits11,
bits13 TypeBits11,
bits14 TypeBits11,
bits21 TypeBits11,
bits22 TypeBits11,
bits23 TypeBits11,
bits24 TypeBits11,
sourceAudioOutAES1L TypeSourceAudioOutAES1L,
sourceAudioOutAES1R TypeSourceAudioOutAES1L,
sourceAudioOutAES2L TypeSourceAudioOutAES1L,
sourceAudioOutAES2R TypeSourceAudioOutAES1L,
sourceAudioOutAES3L TypeSourceAudioOutAES1L,
sourceAudioOutAES3R TypeSourceAudioOutAES1L,
sourceAudioOutAES4L TypeSourceAudioOutAES1L,
sourceAudioOutAES4R TypeSourceAudioOutAES1L,
sourceAudioOutMUX11L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX11R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX12L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX12R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX13L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX13R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX14L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX14R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX15L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX15R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX16L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX16R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX17L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX17R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX18L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX18R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX21L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX21R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX22L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX22R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX23L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX23R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX24L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX24R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX25L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX25R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX26L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX26R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX27L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX27R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX28L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX28R TypeSourceAudioOutMUX11L,
out1EmbedGroup1 OnOffValue,
out1EmbedGroup2 OnOffValue,
out1EmbedGroup3 OnOffValue,
out1EmbedGroup4 OnOffValue,
out2EmbedGroup1 OnOffValue,
out2EmbedGroup2 OnOffValue,
out2EmbedGroup3 OnOffValue,
out2EmbedGroup4 OnOffValue,
out1StatusGroup1 TypeOut1StatusGroup1,
out1StatusGroup2 TypeOut1StatusGroup1,
out1StatusGroup3 TypeOut1StatusGroup1,
out1StatusGroup4 TypeOut1StatusGroup1,
out2StatusGroup1 TypeOut1StatusGroup1,
out2StatusGroup2 TypeOut1StatusGroup1,
out2StatusGroup3 TypeOut1StatusGroup1,
out2StatusGroup4 TypeOut1StatusGroup1,
out1DeleteGroup1 TypeOut1DeleteGroup1,
out1DeleteGroup2 TypeOut1DeleteGroup1,
out1DeleteGroup3 TypeOut1DeleteGroup1,
out1DeleteGroup4 TypeOut1DeleteGroup1,
out2DeleteGroup1 TypeOut1DeleteGroup1,
out2DeleteGroup2 TypeOut1DeleteGroup1,
out2DeleteGroup3 TypeOut1DeleteGroup1,
out2DeleteGroup4 TypeOut1DeleteGroup1,
temperatureMAX1617Int Integer32,
temperatureMAX1617Ext Integer32,
audioDelayAESIn1 FixedPointValue2,
audioDelayAESIn2 FixedPointValue2,
audioDelayAESIn3 FixedPointValue2,
audioDelayAESIn4 FixedPointValue2,
audioDelayAESOut1 FixedPointValue2,
audioDelayAESOut2 FixedPointValue2,
audioDelayAESOut3 FixedPointValue2,
audioDelayAESOut4 FixedPointValue2,
audioDelaySDI11 FixedPointValue2,
audioDelaySDI12 FixedPointValue2,
audioDelaySDI13 FixedPointValue2,
audioDelaySDI14 FixedPointValue2,
audioDelaySDI15 FixedPointValue2,
audioDelaySDI16 FixedPointValue2,
audioDelaySDI17 FixedPointValue2,
audioDelaySDI18 FixedPointValue2,
audioDelaySDIOut11 FixedPointValue2,
audioDelaySDIOut12 FixedPointValue2,
audioDelaySDIOut13 FixedPointValue2,
audioDelaySDIOut14 FixedPointValue2,
audioDelaySDIOut15 FixedPointValue2,
audioDelaySDIOut16 FixedPointValue2,
audioDelaySDIOut17 FixedPointValue2,
audioDelaySDIOut18 FixedPointValue2,
audioDelaySDIOut21 FixedPointValue2,
audioDelaySDIOut22 FixedPointValue2,
audioDelaySDIOut23 FixedPointValue2,
audioDelaySDIOut24 FixedPointValue2,
audioDelaySDIOut25 FixedPointValue2,
audioDelaySDIOut26 FixedPointValue2,
audioDelaySDIOut27 FixedPointValue2,
audioDelaySDIOut28 FixedPointValue2,
delayPulseAssign TypeDelayPulseAssign,
deembPhaseSync1 OnOffValue,
deembPhaseSyncVerify1 TypeDeembPhaseSyncVerify1,
presetsGPIOn TypePresetsGPIOn,
presetsGPIOff TypePresetsGPIOn,
genLockStatus TypeGenLockStatus,
inputToRefDelay1H Integer32,
inputToRefDelay1V Integer32,
inputToRefDelay2H Integer32,
inputToRefDelay2V Integer32,
audioContentSDI11 TypeAudioContentSDI11,
audioContentSDI12 TypeAudioContentSDI11,
audioContentSDI13 TypeAudioContentSDI11,
audioContentSDI14 TypeAudioContentSDI11,
audioContentSDI15 TypeAudioContentSDI11,
audioContentSDI16 TypeAudioContentSDI11,
audioContentSDI17 TypeAudioContentSDI11,
audioContentSDI18 TypeAudioContentSDI11,
audioContentStatusSDI11 TypeAudioContentStatusSDI11,
audioContentStatusSDI12 TypeAudioContentStatusSDI11,
audioContentStatusSDI13 TypeAudioContentStatusSDI11,
audioContentStatusSDI14 TypeAudioContentStatusSDI11,
audioContentStatusSDI15 TypeAudioContentStatusSDI11,
audioContentStatusSDI16 TypeAudioContentStatusSDI11,
audioContentStatusSDI17 TypeAudioContentStatusSDI11,
audioContentStatusSDI18 TypeAudioContentStatusSDI11,
audioContentAES1 TypeAudioContentSDI11,
audioContentAES2 TypeAudioContentSDI11,
audioContentAES3 TypeAudioContentSDI11,
audioContentAES4 TypeAudioContentSDI11,
audioContentStatusAES1 TypeAudioContentStatusSDI11,
audioContentStatusAES2 TypeAudioContentStatusSDI11,
audioContentStatusAES3 TypeAudioContentStatusSDI11,
audioContentStatusAES4 TypeAudioContentStatusSDI11,
out1MetaLineSelectionMode TypeConv3MetaTXTLinesSelectionMode,
out1MetaS352Insertion TypeDeembPhaseSyncVerify1,
out1MetaAFDLine TypeOut1MetaAFDLine,
out1MetaCCCDPLine TypeOut1MetaAFDLine,
out1MetaCCRAWLine TypeOut1MetaAFDLine,
out1MetaS2020Line TypeOut1MetaAFDLine,
out1MetaS2031WSTLine TypeOut1MetaAFDLine,
out1MetaOP47WSTLine TypeOut1MetaAFDLine,
out1MetaATCLTCLine TypeOut1MetaAFDLine,
out1MetaATCVITCLine TypeOut1MetaAFDLine,
out1MetaATCLTCLocation TypeOut1MetaATCLTCLocation,
out1MetaATCVITCLocation TypeOut1MetaATCLTCLocation,
out2MetaLineSelectionMode TypeConv3MetaTXTLinesSelectionMode,
out2MetaS352Insertion TypeDeembPhaseSyncVerify1,
out2MetaAFDLine TypeOut1MetaAFDLine,
out2MetaCCCDPLine TypeOut1MetaAFDLine,
out2MetaCCRAWLine TypeOut1MetaAFDLine,
out2MetaS2020Line TypeOut1MetaAFDLine,
out2MetaS2031WSTLine TypeOut1MetaAFDLine,
out2MetaOP47WSTLine TypeOut1MetaAFDLine,
out2MetaATCLTCLine TypeOut1MetaAFDLine,
out2MetaATCVITCLine TypeOut1MetaAFDLine,
out2MetaATCLTCLocation TypeOut1MetaATCLTCLocation,
out2MetaATCVITCLocation TypeOut1MetaATCLTCLocation,
sDIIn1StatusAFD TypeSDIIn1StatusAFD,
sDIIn1StatusWSS TypeSDIIn1StatusWSS,
sDIIn1StatusVI TypeSDIIn1StatusVI,
sDIIn1AFDLine TypeSDIIn1AFDLine,
sDIIn1CCCDPLine TypeSDIIn1AFDLine,
sDIIn1CCRAWLine TypeSDIIn1AFDLine,
sDIIn1S2020Line TypeSDIIn1AFDLine,
sDIIn1S2031WSTFirstLine TypeSDIIn1AFDLine,
sDIIn1S2031WSTLastLine TypeSDIIn1AFDLine,
sDIIn1OP47WSTFirstLine TypeSDIIn1AFDLine,
sDIIn1OP47WSTLastLine TypeSDIIn1AFDLine,
sDIIn1ATCLTCLine TypeSDIIn1AFDLine,
sDIIn1ATCVITCLine TypeSDIIn1AFDLine,
sDIIn1ATCLTCLocation TypeOut1MetaATCLTCLocation,
sDIIn1ATCVITCLocation TypeOut1MetaATCLTCLocation,
sDIIn1StatusFormatReactOnChange TypeSDIIn1StatusFormatReactOnChange,
sDIIn1StatusFormatReactOnLoss TypeSDIIn1StatusFormatReactOnChange,
snapToReferenceFrameLength OnOffValue,
out1ClipHeadroom OnOffValue,
out2ClipHeadroom OnOffValue,
out1FixedProcTime OnOffValue,
out2FixedProcTime OnOffValue,
out1DelayMode TypeOut1DelayMode,
out2DelayMode TypeOut1DelayMode,
out1FreezeMode TypeOut1FreezeMode,
out2FreezeMode TypeOut1FreezeMode,
audioDolbyETiming1 TypeAudioDolbyETiming1,
audioDolbyETiming2 TypeAudioDolbyETiming1,
audioDolbyETiming3 TypeAudioDolbyETiming1,
audioDolbyETiming4 TypeAudioDolbyETiming1,
conv3COCOGainG FixedPointValue1,
conv3COCOGainB FixedPointValue1,
conv3COCOGainR FixedPointValue1,
conv3COCOOffsetG FixedPointValue1,
conv3COCOOffsetB FixedPointValue1,
conv3COCOOffsetR FixedPointValue1,
conv3COCOGangGains OnOffValue,
conv3COCOGangOffsets OnOffValue,
conv3COCOMode TypeConv3COCOMode,
out1TotalProcTime FixedPointValue3,
out2TotalProcTime FixedPointValue3,
aSCA OnOffValue,
conv3LockImgConvSettings OnOffValue,
presetsNumber Integer32,
presetsActive TypePresetsGPIOn,
presetsSaveAs TypePresetsSaveAs,
presetsLoadToCurrent TypePresetsSaveAs,
presetsName0 DisplayString,
presetsName1 DisplayString,
presetsName2 DisplayString,
presetsName3 DisplayString,
presetsName4 DisplayString,
presetsName5 DisplayString,
presetsName6 DisplayString,
presetsName7 DisplayString,
out1MetaOP47FieldInversion TypeDeembPhaseSyncVerify1,
out2MetaOP47FieldInversion TypeDeembPhaseSyncVerify1,
sDIIn1OP47FieldInversion TypeDeembPhaseSyncVerify1,
out1MetaTXTEmbedAlternateFrames TypeDeembPhaseSyncVerify1,
out2MetaTXTEmbedAlternateFrames TypeDeembPhaseSyncVerify1,
clipHeadroomLevel TypeClipHeadroomLevel,
videoDelayTrackingAESOut1 TypeVideoDelayTrackingAESOut1,
videoDelayTrackingAESOut2 TypeVideoDelayTrackingAESOut1,
videoDelayTrackingAESOut3 TypeVideoDelayTrackingAESOut1,
videoDelayTrackingAESOut4 TypeVideoDelayTrackingAESOut1,
out1FrameSyncCompensation Integer32,
boardID Integer32,
inputToRefTolerance OnOffValue,
sDIIn1FormatPsF TypeSDIIn1FormatPsF,
audioDelayAESOutGang OnOffValue,
audioDelaySDIOut1Gang OnOffValue,
audioDelaySDIOut2Gang OnOffValue,
eventReferenceNoInputSNMP TypeEventReferenceNoInputSNMP,
eventSDIInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
eventSDIInput2NoInputSNMP TypeEventReferenceNoInputSNMP,
eventFanFailureSNMP TypeEventReferenceNoInputSNMP,
eventHighTemperatureSNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoSDIInput1SNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoSDIInput2SNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoReferenceSNMP TypeEventReferenceNoInputSNMP,
eventAESInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput2NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput3NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput4NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput1asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput2asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput3asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput4asynchronousSNMP TypeEventReferenceNoInputSNMP,
conv3InputStatus TypeReferenceStatus,
crossBarAudioIntern DisplayString,
crossBarAudioOutMUX1 DisplayString,
crossBarAudioOutMUX2 DisplayString,
crossBarAudioOutExtAES DisplayString,
conv3InSize DisplayString,
conv3OutSize DisplayString,
sNumber DisplayString,
out3ModifyPsF TypeOut1ModifyPsF }
-- Conformance statements
conformance OBJECT-IDENTITY
STATUS current
DESCRIPTION "Conformance declaration of PVD5806-B-D"
::= { sw619 2 }
paramGroup OBJECT-GROUP
OBJECTS {
typeName,
displayName,
position,
uptime,
type,
version,
statusColor,
statusColorRGB,
statusText,
factoryReset,
lock,
locate,
eventReferenceNoInput,
eventSDIInput1NoInput,
eventSDIInput2NoInput,
eventFanFailure,
eventHighTemperature,
eventCouldnotlocktoSDIInput1,
eventCouldnotlocktoSDIInput2,
eventCouldnotlocktoReference,
eventAESInput1NoInput,
eventAESInput2NoInput,
eventAESInput3NoInput,
eventAESInput4NoInput,
eventAESInput1asynchronous,
eventAESInput2asynchronous,
eventAESInput3asynchronous,
eventAESInput4asynchronous,
channel2CoupleTo1,
referenceLock,
referenceStatus,
referenceSource,
freqPreselect,
freq,
gPIFunc,
syncMode1,
inputStatusSDI1,
inputFreezeSDI1,
syncSDIIn1,
conv3ControlMode,
conv3AspectInSelect,
conv3AspectIn,
conv3FormatOut,
conv3StatusOut,
conv3Mode,
conv3AdvancedSettings,
conv3OutInsertAFD,
conv3OutInsertVI,
conv3OutInsertWSS,
conv3StatusIn,
conv3CropHpos,
conv3CropVpos,
conv3CropHsize,
conv3CropVsize,
conv3InsertHpos,
conv3InsertVpos,
conv3InsertHsize,
conv3InsertVsize,
conv3MotionAdaptive,
conv3NRGeneral,
conv3NRBlockArtifact,
conv3NRMosquito,
conv3DetailLevel,
conv3DetailThreshold,
conv3MetaAdvancedSettings,
conv3MetaCCSourceDefaultPriorities,
conv3MetaTCSourceDefaultPriorities,
conv3MetaAFDInStatus,
conv3MetaVIInStatus,
conv3MetaWSSInStatus,
conv3MetaCCCDPOutStatus,
conv3MetaCCCDPInStatus,
conv3MetaCCCDPInsertion,
conv3MetaCCCDPSourcePrio1,
conv3MetaCCCDPSourcePrio2,
conv3MetaCCCDPSourcePrio3,
conv3MetaCCRAWOutStatus,
conv3MetaCCRAWInStatus,
conv3MetaCCRAWInsertion,
conv3MetaCCRAWSourcePrio1,
conv3MetaCCRAWSourcePrio2,
conv3MetaCCRAWSourcePrio3,
conv3MetaCCL21OutStatus,
conv3MetaCCL21InStatus,
conv3MetaCCL21Insertion,
conv3MetaCCL21SourcePrio1,
conv3MetaCCL21SourcePrio2,
conv3MetaCCL21SourcePrio3,
conv3MetaTCLTCInStatus,
conv3MetaTCLTCInsertion,
conv3MetaTCLTCSourcePrio1,
conv3MetaTCLTCSourcePrio2,
conv3MetaTCLTCSourcePrio3,
conv3MetaTCVITCInStatus,
conv3MetaTCVITCInsertion,
conv3MetaTCVITCSourcePrio1,
conv3MetaTCVITCSourcePrio2,
conv3MetaTCVITCSourcePrio3,
conv3MetaTCDVITCInStatus,
conv3MetaTCDVITCInsertion,
conv3MetaTCDVITCSourcePrio1,
conv3MetaTCDVITCSourcePrio2,
conv3MetaTCDVITCSourcePrio3,
conv3MetaTCLTCOutStatus,
conv3MetaTCVITCOutStatus,
conv3MetaTCDVITCAOutStatus,
conv3MetaTCDVITCBOutStatus,
conv3MetaTCDVITCADestination625,
conv3MetaTCDVITCBDestination625,
conv3MetaTCDVITCADestination525,
conv3MetaTCDVITCBDestination525,
conv3MetaTCDVITCADetectedSrcLine,
conv3MetaTCDVITCBDetectedSrcLine,
conv3MetaTCVITCDetectedDVITCLine,
conv3MetaTCDVITCAutomatic,
conv3MetaTXTWSTInStatus,
conv3MetaTXTS2031InStatus,
conv3MetaTXTOP47InStatus,
conv3MetaTXTEncoderMode,
conv3MetaTXTLinesSelectionMode,
conv3MetaField1Overflow,
conv3MetaField2Overflow,
conv3MetaSMPTE2020Status,
conv3MetaSMPTE2020Insertion,
conv3ModeAutoARto169,
conv3ModeAutoARto43,
conv3InsertAFDFullFrame169,
conv3ModeAutoFallback,
sDIIn1TXTWSTInStatus,
sDIIn1TXTS2031InStatus,
sDIIn1TXTOP47InStatus,
sDIIn1TXTDecoderMode,
sDIIn1TCDVITCASource625,
sDIIn1TCDVITCBSource625,
sDIIn1TCDVITCASource525,
sDIIn1TCDVITCBSource525,
sDIIn1CCCDPStatus,
sDIIn1CCRAWStatus,
sDIIn1CCL21Status,
sDIIn1TCLTCStatus,
sDIIn1TCVITCStatus,
sDIIn1TCDVITCStatus,
out1Assign,
out1Standard,
out2Assign,
out2Standard,
out1DelayFrames,
out1DelayLines,
out1DelayPixel,
out1DelayMs,
out1ApertureEnable,
out1ApertureLevel,
out1HBlank,
out1VBlank,
out1Gain,
out1Saturation,
out1BlackLevel,
out1Hue,
out1TestPatternSelect,
out1TestPatternStd,
out1TestPatternOn,
out1IfNoInput,
out1ModifyPsF,
out2DelayFrames,
out2DelayLines,
out2DelayPixel,
out2DelayMs,
out2ApertureEnable,
out2ApertureLevel,
out2HBlank,
out2VBlank,
out2Gain,
out2Saturation,
out2BlackLevel,
out2Hue,
out2TestPatternSelect,
out2TestPatternStd,
out2TestPatternOn,
out2IfNoInput,
out2ModifyPsF,
inputStatusAES1,
inputStatusAES2,
inputStatusAES3,
inputStatusAES4,
sourceInternAudio1,
sourceInternAudio2,
sourceInternAudio3,
sourceInternAudio4,
sourceInternAudio5,
sourceInternAudio6,
sourceInternAudio7,
sourceInternAudio8,
sourceInternAudio9,
sourceInternAudio10,
sourceInternAudio11,
sourceInternAudio12,
sourceInternAudio13,
sourceInternAudio14,
sourceInternAudio15,
sourceInternAudio16,
sourceInternAudio17,
sourceInternAudio18,
sourceInternAudio19,
sourceInternAudio20,
sourceInternAudioDirect11,
sourceInternAudioDirect12,
sourceInternAudioDirect13,
sourceInternAudioDirect14,
sRC1,
sRC2,
sRC3,
sRC4,
sRC5,
sRC6,
sRC7,
sRC8,
audioGain1L,
audioMute1L,
audioInvert1L,
audioSilence1L,
audioOverload1L,
audioGain1R,
audioMute1R,
audioInvert1R,
audioSilence1R,
audioOverload1R,
audioMixDown1,
audioGain2L,
audioMute2L,
audioInvert2L,
audioSilence2L,
audioOverload2L,
audioGain2R,
audioMute2R,
audioInvert2R,
audioSilence2R,
audioOverload2R,
audioMixDown2,
audioGain3L,
audioMute3L,
audioInvert3L,
audioSilence3L,
audioOverload3L,
audioGain3R,
audioMute3R,
audioInvert3R,
audioSilence3R,
audioOverload3R,
audioMixDown3,
audioGain4L,
audioMute4L,
audioInvert4L,
audioSilence4L,
audioOverload4L,
audioGain4R,
audioMute4R,
audioInvert4R,
audioSilence4R,
audioOverload4R,
audioMixDown4,
audioGain5L,
audioMute5L,
audioInvert5L,
audioSilence5L,
audioOverload5L,
audioGain5R,
audioMute5R,
audioInvert5R,
audioSilence5R,
audioOverload5R,
audioMixDown5,
audioGain6L,
audioMute6L,
audioInvert6L,
audioSilence6L,
audioOverload6L,
audioGain6R,
audioMute6R,
audioInvert6R,
audioSilence6R,
audioOverload6R,
audioMixDown6,
audioGain7L,
audioMute7L,
audioInvert7L,
audioSilence7L,
audioOverload7L,
audioGain7R,
audioMute7R,
audioInvert7R,
audioSilence7R,
audioOverload7R,
audioMixDown7,
audioGain8L,
audioMute8L,
audioInvert8L,
audioSilence8L,
audioOverload8L,
audioGain8R,
audioMute8R,
audioInvert8R,
audioSilence8R,
audioOverload8R,
audioMixDown8,
audioGain9L,
audioMute9L,
audioInvert9L,
audioSilence9L,
audioOverload9L,
audioGain9R,
audioMute9R,
audioInvert9R,
audioSilence9R,
audioOverload9R,
audioMixDown9,
audioGain10L,
audioMute10L,
audioInvert10L,
audioSilence10L,
audioOverload10L,
audioGain10R,
audioMute10R,
audioInvert10R,
audioSilence10R,
audioOverload10R,
audioMixDown10,
audioGain11L,
audioMute11L,
audioInvert11L,
audioSilence11L,
audioOverload11L,
audioGain11R,
audioMute11R,
audioInvert11R,
audioSilence11R,
audioOverload11R,
audioMixDown11,
audioGain12L,
audioMute12L,
audioInvert12L,
audioSilence12L,
audioOverload12L,
audioGain12R,
audioMute12R,
audioInvert12R,
audioSilence12R,
audioOverload12R,
audioMixDown12,
audioGain13L,
audioMute13L,
audioInvert13L,
audioSilence13L,
audioOverload13L,
audioGain13R,
audioMute13R,
audioInvert13R,
audioSilence13R,
audioOverload13R,
audioMixDown13,
audioGain14L,
audioMute14L,
audioInvert14L,
audioSilence14L,
audioOverload14L,
audioGain14R,
audioMute14R,
audioInvert14R,
audioSilence14R,
audioOverload14R,
audioMixDown14,
audioGain15L,
audioMute15L,
audioInvert15L,
audioSilence15L,
audioOverload15L,
audioGain15R,
audioMute15R,
audioInvert15R,
audioSilence15R,
audioOverload15R,
audioMixDown15,
audioGain16L,
audioMute16L,
audioInvert16L,
audioSilence16L,
audioOverload16L,
audioGain16R,
audioMute16R,
audioInvert16R,
audioSilence16R,
audioOverload16R,
audioMixDown16,
audioGain17L,
audioMute17L,
audioInvert17L,
audioSilence17L,
audioOverload17L,
audioGain17R,
audioMute17R,
audioInvert17R,
audioSilence17R,
audioOverload17R,
audioMixDown17,
audioGain18L,
audioMute18L,
audioInvert18L,
audioSilence18L,
audioOverload18L,
audioGain18R,
audioMute18R,
audioInvert18R,
audioSilence18R,
audioOverload18R,
audioMixDown18,
audioGain19L,
audioMute19L,
audioInvert19L,
audioSilence19L,
audioOverload19L,
audioGain19R,
audioMute19R,
audioInvert19R,
audioSilence19R,
audioOverload19R,
audioMixDown19,
audioGain20L,
audioMute20L,
audioInvert20L,
audioSilence20L,
audioOverload20L,
audioGain20R,
audioMute20R,
audioInvert20R,
audioSilence20R,
audioOverload20R,
audioMixDown20,
bits11,
bits12,
bits13,
bits14,
bits21,
bits22,
bits23,
bits24,
sourceAudioOutAES1L,
sourceAudioOutAES1R,
sourceAudioOutAES2L,
sourceAudioOutAES2R,
sourceAudioOutAES3L,
sourceAudioOutAES3R,
sourceAudioOutAES4L,
sourceAudioOutAES4R,
sourceAudioOutMUX11L,
sourceAudioOutMUX11R,
sourceAudioOutMUX12L,
sourceAudioOutMUX12R,
sourceAudioOutMUX13L,
sourceAudioOutMUX13R,
sourceAudioOutMUX14L,
sourceAudioOutMUX14R,
sourceAudioOutMUX15L,
sourceAudioOutMUX15R,
sourceAudioOutMUX16L,
sourceAudioOutMUX16R,
sourceAudioOutMUX17L,
sourceAudioOutMUX17R,
sourceAudioOutMUX18L,
sourceAudioOutMUX18R,
sourceAudioOutMUX21L,
sourceAudioOutMUX21R,
sourceAudioOutMUX22L,
sourceAudioOutMUX22R,
sourceAudioOutMUX23L,
sourceAudioOutMUX23R,
sourceAudioOutMUX24L,
sourceAudioOutMUX24R,
sourceAudioOutMUX25L,
sourceAudioOutMUX25R,
sourceAudioOutMUX26L,
sourceAudioOutMUX26R,
sourceAudioOutMUX27L,
sourceAudioOutMUX27R,
sourceAudioOutMUX28L,
sourceAudioOutMUX28R,
out1EmbedGroup1,
out1EmbedGroup2,
out1EmbedGroup3,
out1EmbedGroup4,
out2EmbedGroup1,
out2EmbedGroup2,
out2EmbedGroup3,
out2EmbedGroup4,
out1StatusGroup1,
out1StatusGroup2,
out1StatusGroup3,
out1StatusGroup4,
out2StatusGroup1,
out2StatusGroup2,
out2StatusGroup3,
out2StatusGroup4,
out1DeleteGroup1,
out1DeleteGroup2,
out1DeleteGroup3,
out1DeleteGroup4,
out2DeleteGroup1,
out2DeleteGroup2,
out2DeleteGroup3,
out2DeleteGroup4,
temperatureMAX1617Int,
temperatureMAX1617Ext,
audioDelayAESIn1,
audioDelayAESIn2,
audioDelayAESIn3,
audioDelayAESIn4,
audioDelayAESOut1,
audioDelayAESOut2,
audioDelayAESOut3,
audioDelayAESOut4,
audioDelaySDI11,
audioDelaySDI12,
audioDelaySDI13,
audioDelaySDI14,
audioDelaySDI15,
audioDelaySDI16,
audioDelaySDI17,
audioDelaySDI18,
audioDelaySDIOut11,
audioDelaySDIOut12,
audioDelaySDIOut13,
audioDelaySDIOut14,
audioDelaySDIOut15,
audioDelaySDIOut16,
audioDelaySDIOut17,
audioDelaySDIOut18,
audioDelaySDIOut21,
audioDelaySDIOut22,
audioDelaySDIOut23,
audioDelaySDIOut24,
audioDelaySDIOut25,
audioDelaySDIOut26,
audioDelaySDIOut27,
audioDelaySDIOut28,
delayPulseAssign,
deembPhaseSync1,
deembPhaseSyncVerify1,
presetsGPIOn,
presetsGPIOff,
genLockStatus,
inputToRefDelay1H,
inputToRefDelay1V,
inputToRefDelay2H,
inputToRefDelay2V,
audioContentSDI11,
audioContentSDI12,
audioContentSDI13,
audioContentSDI14,
audioContentSDI15,
audioContentSDI16,
audioContentSDI17,
audioContentSDI18,
audioContentStatusSDI11,
audioContentStatusSDI12,
audioContentStatusSDI13,
audioContentStatusSDI14,
audioContentStatusSDI15,
audioContentStatusSDI16,
audioContentStatusSDI17,
audioContentStatusSDI18,
audioContentAES1,
audioContentAES2,
audioContentAES3,
audioContentAES4,
audioContentStatusAES1,
audioContentStatusAES2,
audioContentStatusAES3,
audioContentStatusAES4,
out1MetaLineSelectionMode,
out1MetaS352Insertion,
out1MetaAFDLine,
out1MetaCCCDPLine,
out1MetaCCRAWLine,
out1MetaS2020Line,
out1MetaS2031WSTLine,
out1MetaOP47WSTLine,
out1MetaATCLTCLine,
out1MetaATCVITCLine,
out1MetaATCLTCLocation,
out1MetaATCVITCLocation,
out2MetaLineSelectionMode,
out2MetaS352Insertion,
out2MetaAFDLine,
out2MetaCCCDPLine,
out2MetaCCRAWLine,
out2MetaS2020Line,
out2MetaS2031WSTLine,
out2MetaOP47WSTLine,
out2MetaATCLTCLine,
out2MetaATCVITCLine,
out2MetaATCLTCLocation,
out2MetaATCVITCLocation,
sDIIn1StatusAFD,
sDIIn1StatusWSS,
sDIIn1StatusVI,
sDIIn1AFDLine,
sDIIn1CCCDPLine,
sDIIn1CCRAWLine,
sDIIn1S2020Line,
sDIIn1S2031WSTFirstLine,
sDIIn1S2031WSTLastLine,
sDIIn1OP47WSTFirstLine,
sDIIn1OP47WSTLastLine,
sDIIn1ATCLTCLine,
sDIIn1ATCVITCLine,
sDIIn1ATCLTCLocation,
sDIIn1ATCVITCLocation,
sDIIn1StatusFormatReactOnChange,
sDIIn1StatusFormatReactOnLoss,
snapToReferenceFrameLength,
out1ClipHeadroom,
out2ClipHeadroom,
out1FixedProcTime,
out2FixedProcTime,
out1DelayMode,
out2DelayMode,
out1FreezeMode,
out2FreezeMode,
audioDolbyETiming1,
audioDolbyETiming2,
audioDolbyETiming3,
audioDolbyETiming4,
conv3COCOGainG,
conv3COCOGainB,
conv3COCOGainR,
conv3COCOOffsetG,
conv3COCOOffsetB,
conv3COCOOffsetR,
conv3COCOGangGains,
conv3COCOGangOffsets,
conv3COCOMode,
out1TotalProcTime,
out2TotalProcTime,
aSCA,
conv3LockImgConvSettings,
presetsNumber,
presetsActive,
presetsSaveAs,
presetsLoadToCurrent,
presetsName0,
presetsName1,
presetsName2,
presetsName3,
presetsName4,
presetsName5,
presetsName6,
presetsName7,
out1MetaOP47FieldInversion,
out2MetaOP47FieldInversion,
sDIIn1OP47FieldInversion,
out1MetaTXTEmbedAlternateFrames,
out2MetaTXTEmbedAlternateFrames,
clipHeadroomLevel,
videoDelayTrackingAESOut1,
videoDelayTrackingAESOut2,
videoDelayTrackingAESOut3,
videoDelayTrackingAESOut4,
out1FrameSyncCompensation,
boardID,
inputToRefTolerance,
sDIIn1FormatPsF,
audioDelayAESOutGang,
audioDelaySDIOut1Gang,
audioDelaySDIOut2Gang,
eventReferenceNoInputSNMP,
eventSDIInput1NoInputSNMP,
eventSDIInput2NoInputSNMP,
eventFanFailureSNMP,
eventHighTemperatureSNMP,
eventCouldnotlocktoSDIInput1SNMP,
eventCouldnotlocktoSDIInput2SNMP,
eventCouldnotlocktoReferenceSNMP,
eventAESInput1NoInputSNMP,
eventAESInput2NoInputSNMP,
eventAESInput3NoInputSNMP,
eventAESInput4NoInputSNMP,
eventAESInput1asynchronousSNMP,
eventAESInput2asynchronousSNMP,
eventAESInput3asynchronousSNMP,
eventAESInput4asynchronousSNMP,
conv3InputStatus,
crossBarAudioIntern,
crossBarAudioOutMUX1,
crossBarAudioOutMUX2,
crossBarAudioOutExtAES,
conv3InSize,
conv3OutSize,
sNumber,
out3ModifyPsF }
STATUS current
DESCRIPTION "Conformance group containing all device parameters"
::= { conformance 1 }
paramCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance specification"
MODULE -- This module
MANDATORY-GROUPS { paramGroup }
::= { conformance 2 }
END