-- Machine generated MIB file, do not edit!
--
-- MIB file for PVD5810-D, type code 07.F2, software label 667
-- Generated on Tuesday, 09-Aug-16 14:04:28 UTC
-- CVS $Id: PVD5810-D_07f2_sw667.mib,v 1.7 2016/08/09 14:04:30 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PVD5810-D-07f2-sw667-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pvd5810-d-07f2-sw667 MODULE-IDENTITY
    LAST-UPDATED "201608091404Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PVD5810-D, type code 07.F2, software label 667"
    REVISION "201608091404Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 2034667 }

pvd5810-d-07f2 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PVD5810-D"
    ::= { products 2034 }

sw667 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 667"
    ::= { pvd5810-d-07f2 667 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeBackpanelStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        missing(1),
        present(2)
    }

TypeInAes1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        missing(1),
        async(2),
        present(3)
    }

TypeInGrp1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nASDIMissing(0),
        nASDIInvalid(1),
        none(2),
        inserted(3),
        present(4),
        removed(5),
        overwritten(6)
    }

TypeSampleRateConversion1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        bypass(1)
    }

TypeSourceEmbAESStereo112 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aESInt1(0),
        aESInt2(1),
        aESInt3(2),
        aESInt4(3),
        aESInt5(4),
        aESInt6(5),
        aESInt7(6),
        aESInt8(7),
        audExt1(8),
        audExt2(9),
        audExt3(10),
        audExt4(11),
        audExt5(12),
        audExt6(13),
        audExt7(14),
        audExt8(15),
        mute(16)
    }

TypeSourceEmbAES11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aESInt11(0),
        aESInt12(1),
        aESInt13(2),
        aESInt14(3),
        aESInt21(4),
        aESInt22(5),
        aESInt23(6),
        aESInt24(7),
        aESInt31(8),
        aESInt32(9),
        aESInt33(10),
        aESInt34(11),
        aESInt41(12),
        aESInt42(13),
        aESInt43(14),
        aESInt44(15),
        audExt11(16),
        audExt12(17),
        audExt21(18),
        audExt22(19),
        audExt31(20),
        audExt32(21),
        audExt41(22),
        audExt42(23),
        audExt51(24),
        audExt52(25),
        audExt61(26),
        audExt62(27),
        audExt71(28),
        audExt72(29),
        audExt81(30),
        audExt82(31),
        muteL(32),
        muteR(33)
    }

TypeTestToneFrequency ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n1000Hz(0),
        n1010Hz(1)
    }

TypeDolbyFrameSyncSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        deembAES1(0),
        deembAES2(1),
        deembAES3(2),
        deembAES4(3),
        deembAES5(4),
        deembAES6(5),
        deembAES7(6),
        deembAES8(7),
        externAES1(8),
        externAES2(9),
        externAES3(10),
        externAES4(11),
        externAES5(12),
        externAES6(13),
        externAES7(14),
        externAES8(15)
    }

TypeDeleteGroup1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        keep(0),
        del(1)
    }

TypeEmbedBits1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n20Bit(0),
        n24Bit(1)
    }

TypeEmbedded11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        present(0),
        notEmbedded(1)
    }

TypeSourceAESOut11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        intAES11(0),
        intAES12(1),
        intAES13(2),
        intAES14(3),
        intAES21(4),
        intAES22(5),
        intAES23(6),
        intAES24(7),
        intAES31(8),
        intAES32(9),
        intAES33(10),
        intAES34(11),
        intAES41(12),
        intAES42(13),
        intAES43(14),
        intAES44(15),
        extAES11(16),
        extAES12(17),
        extAES21(18),
        extAES22(19),
        extAES31(20),
        extAES32(21),
        extAES41(22),
        extAES42(23),
        extAES51(24),
        extAES52(25),
        extAES61(26),
        extAES62(27),
        extAES71(28),
        extAES72(29),
        extAES81(30),
        extAES82(31),
        muteL(32),
        muteR(33)
    }

TypeDeembPhaseSyncVerify ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeAudioMute1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        norm(0),
        mute(1)
    }

TypeAudioInvert1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        norm(0),
        inv(1)
    }

TypeAudioSilence1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        silence(0),
        noSilence(1)
    }

TypeAudioOverload1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        ok(0),
        overload(1)
    }

TypeAESPortAssignment1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input(0),
        output(1)
    }

TypeAudioContentAES1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeAudioContentStatusAES1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeOutStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27)
    }

TypeDelayVideoUserMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        framesLinesPixels(0),
        milliseconds(1)
    }

TypeReferenceLock ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lockToRefIn(0),
        lockToSDI1(1)
    }

TypeReferenceSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        externBoard(0),
        internRack(1)
    }

TypeFreqPreselect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        evenFrequencies(0),
        oddFrequencies(1),
        followLastRefInput(2)
    }

TypeFreq ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        evenFreq(0),
        oddFreq(1),
        evenFreqX(2),
        oddFreqX(3),
        evenFreqXX(4)
    }

TypeGPIFunc ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        freezeInput1(1),
        freezeInput2(2),
        freezeBothInputs(3),
        switchUserPresets(4)
    }

TypeSyncMode1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        frameSync(0),
        lineSyncH(1),
        lineSyncV(2)
    }

TypeInputFreezeSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeOnTRSError(0),
        transparentForTRSErrors(1),
        forceFreeze(2)
    }

TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        black(0),
        red(1),
        green(2),
        blue(3),
        cyan(4),
        magenta(5),
        yellow(6),
        white(7),
        n15Grey(8),
        eQPath(9),
        pLLPath(10),
        eQPLLPath(11),
        n75Colorbar(12),
        colorbarOverRed(13)
    }

TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n525(0),
        n625(1),
        n720p60(2),
        n720p5994(3),
        n720p50(4),
        n720p30(5),
        n720p2997(6),
        n720p25(7),
        n720p24(8),
        n720p2398(9),
        n1080i60(10),
        n1080i5994(11),
        n1080i50(12),
        n1080p30(13),
        n1080p2997(14),
        n1080p25(15),
        n1080p24(16),
        n1080p2398(17),
        n1080psF24(18),
        n1080psF2398(19),
        n1080p60(20),
        n1080p5994(21),
        n1080p50(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        followLastInput(26)
    }

TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        testPattern(1),
        black(2),
        freeze(3)
    }

TypePresetsGPIOn ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        current(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypeOut1FreezeMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeField1(0),
        freezeField2(1),
        freezeFrame(2),
        testPattern(3)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypePresetsSaveAs ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypePresetsCurrentSettingsBasedOn ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        default(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypeEventPrimaryPowermissingSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 8 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 9 }

backpanelStatus OBJECT-TYPE
    SYNTAX TypeBackpanelStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication of the device backpanel"
    ::= { paramEntry 10 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 11 }

inAes1 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 1 status"
    ::= { paramEntry 14 }

inAes2 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 2 status"
    ::= { paramEntry 15 }

inAes3 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 3 status"
    ::= { paramEntry 16 }

inAes4 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 4 status"
    ::= { paramEntry 17 }

inAes5 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 5 status"
    ::= { paramEntry 18 }

inAes6 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 6 status"
    ::= { paramEntry 19 }

inAes7 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 7 status"
    ::= { paramEntry 20 }

inAes8 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 8 status"
    ::= { paramEntry 21 }

inGrp1 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 22 }

inGrp2 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 23 }

inGrp3 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 24 }

inGrp4 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 25 }

embedGroup1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 1 into the video output"
    ::= { paramEntry 26 }

embedGroup2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 2 into the video output"
    ::= { paramEntry 27 }

embedGroup3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 3 into the video output"
    ::= { paramEntry 28 }

embedGroup4 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 4 into the video output"
    ::= { paramEntry 29 }

sampleRateConversion1 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 1"
    ::= { paramEntry 30 }

sampleRateConversion2 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 2"
    ::= { paramEntry 31 }

sampleRateConversion3 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 3"
    ::= { paramEntry 32 }

sampleRateConversion4 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 4"
    ::= { paramEntry 33 }

sampleRateConversion5 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 5"
    ::= { paramEntry 34 }

sampleRateConversion6 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 6"
    ::= { paramEntry 35 }

sampleRateConversion7 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 7"
    ::= { paramEntry 36 }

sampleRateConversion8 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 8"
    ::= { paramEntry 37 }

sampleRateConversion9 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 9"
    ::= { paramEntry 38 }

sampleRateConversion10 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 10"
    ::= { paramEntry 39 }

sampleRateConversion11 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 11"
    ::= { paramEntry 40 }

sampleRateConversion12 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 12"
    ::= { paramEntry 41 }

sampleRateConversion13 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 13"
    ::= { paramEntry 42 }

sampleRateConversion14 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 14"
    ::= { paramEntry 43 }

sampleRateConversion15 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 15"
    ::= { paramEntry 44 }

sampleRateConversion16 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 16"
    ::= { paramEntry 45 }

sourceEmbAESStereo112 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 1.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES1.1-2.1 and SourceEmbAES1.1-2.2"
    ::= { paramEntry 79 }

sourceEmbAES11 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.1"
    ::= { paramEntry 80 }

sourceEmbAES12 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.2"
    ::= { paramEntry 82 }

sourceEmbAESStereo134 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 1.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES1.3-4.1 and SourceEmbAES1.3-4.2"
    ::= { paramEntry 84 }

sourceEmbAES13 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.3"
    ::= { paramEntry 85 }

sourceEmbAES14 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.4"
    ::= { paramEntry 87 }

sourceEmbAESStereo212 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 2.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES2.1-2.1 and SourceEmbAES2.1-2.2"
    ::= { paramEntry 89 }

sourceEmbAES21 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.1"
    ::= { paramEntry 90 }

sourceEmbAES22 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.2"
    ::= { paramEntry 92 }

sourceEmbAESStereo234 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 2.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES2.3-4.1 and SourceEmbAES2.3-4.2"
    ::= { paramEntry 94 }

sourceEmbAES23 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.3"
    ::= { paramEntry 95 }

sourceEmbAES24 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.4"
    ::= { paramEntry 97 }

sourceEmbAESStereo312 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 3.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES3.1-2.1 and SourceEmbAES3.1-2.2"
    ::= { paramEntry 99 }

sourceEmbAES31 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.1"
    ::= { paramEntry 100 }

sourceEmbAES32 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.2"
    ::= { paramEntry 102 }

sourceEmbAESStereo334 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 3.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES3.3-4.1 and SourceEmbAES3.3-4.2"
    ::= { paramEntry 104 }

sourceEmbAES33 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.3"
    ::= { paramEntry 105 }

sourceEmbAES34 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.4"
    ::= { paramEntry 107 }

sourceEmbAESStereo412 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 4.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES4.1-2.1 and SourceEmbAES4.1-2.2"
    ::= { paramEntry 109 }

sourceEmbAES41 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.1"
    ::= { paramEntry 110 }

sourceEmbAES42 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.2"
    ::= { paramEntry 112 }

sourceEmbAESStereo434 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 4.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES4.3-4.1 and SourceEmbAES4.3-4.2"
    ::= { paramEntry 114 }

sourceEmbAES43 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.3"
    ::= { paramEntry 115 }

sourceEmbAES44 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.4"
    ::= { paramEntry 117 }

testToneFrequency OBJECT-TYPE
    SYNTAX TypeTestToneFrequency
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Frequency for the Test Tone"
    ::= { paramEntry 118 }

dolbyFrameSyncSource OBJECT-TYPE
    SYNTAX TypeDolbyFrameSyncSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (stereo) to feed into Dolby E Frame Synchronizer"
    ::= { paramEntry 119 }

deleteGroup1 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 120 }

deleteGroup2 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 121 }

deleteGroup3 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 122 }

deleteGroup4 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 123 }

embedBits1 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 1 (20/24 bit)"
    ::= { paramEntry 124 }

embedBits2 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 2 (20/24 bit)"
    ::= { paramEntry 125 }

embedBits3 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 3 (20/24 bit)"
    ::= { paramEntry 126 }

embedBits4 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 4 (20/24 bit)"
    ::= { paramEntry 127 }

cSBTransSDTV OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Channel Status Block Transparency in SDTV.
OFF: CSB is re-generated to guarantee compatibility with deembedders 
ON:  CSB is embedded, unchanged. Beware of possible imcompatibilities with certain deembedders"
    ::= { paramEntry 128 }

embedded11 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 1"
    ::= { paramEntry 129 }

embedded12 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 2"
    ::= { paramEntry 130 }

embedded13 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 3"
    ::= { paramEntry 131 }

embedded14 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 4"
    ::= { paramEntry 132 }

embedded21 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 1"
    ::= { paramEntry 133 }

embedded22 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 2"
    ::= { paramEntry 134 }

embedded23 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 3"
    ::= { paramEntry 135 }

embedded24 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 4"
    ::= { paramEntry 136 }

embedded31 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 1"
    ::= { paramEntry 137 }

embedded32 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 2"
    ::= { paramEntry 138 }

embedded33 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 3"
    ::= { paramEntry 139 }

embedded34 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 4"
    ::= { paramEntry 140 }

embedded41 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 1"
    ::= { paramEntry 141 }

embedded42 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 2"
    ::= { paramEntry 142 }

embedded43 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 3"
    ::= { paramEntry 143 }

embedded44 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 4"
    ::= { paramEntry 144 }

sourceAESOut11 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.1"
    ::= { paramEntry 147 }

sourceAESOut12 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.2"
    ::= { paramEntry 148 }

sourceAESOut21 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.1"
    ::= { paramEntry 152 }

sourceAESOut22 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.2"
    ::= { paramEntry 153 }

sourceAESOut31 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 3.1"
    ::= { paramEntry 157 }

sourceAESOut32 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 3.2"
    ::= { paramEntry 158 }

sourceAESOut41 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 4.1"
    ::= { paramEntry 162 }

sourceAESOut42 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 4.2"
    ::= { paramEntry 163 }

sourceAESOut51 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 5.1"
    ::= { paramEntry 167 }

sourceAESOut52 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 5.2"
    ::= { paramEntry 168 }

sourceAESOut61 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 6.1"
    ::= { paramEntry 172 }

sourceAESOut62 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 6.2"
    ::= { paramEntry 173 }

sourceAESOut71 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 7.1"
    ::= { paramEntry 177 }

sourceAESOut72 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 7.2"
    ::= { paramEntry 178 }

sourceAESOut81 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 8.1"
    ::= { paramEntry 182 }

sourceAESOut82 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 8.2"
    ::= { paramEntry 183 }

vFlag OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Activate Valid Audio Flag when missing audio on AES Inputs"
    ::= { paramEntry 185 }

deembPhaseSync OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
 All running channels are reset if one channel is added/removed.(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)

If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
    ::= { paramEntry 186 }

deembPhaseSyncVerify OBJECT-TYPE
    SYNTAX TypeDeembPhaseSyncVerify
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
    ::= { paramEntry 187 }

audioGain1L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 1L"
    ::= { paramEntry 188 }

audioMute1L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 1L"
    ::= { paramEntry 189 }

audioInvert1L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 1L"
    ::= { paramEntry 190 }

audioMixDown1L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 1L"
    ::= { paramEntry 191 }

audioSilence1L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 1L"
    ::= { paramEntry 192 }

audioOverload1L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 1L"
    ::= { paramEntry 193 }

audioTestTone1L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 1L"
    ::= { paramEntry 194 }

audioGain1R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 1R"
    ::= { paramEntry 195 }

audioMute1R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 1R"
    ::= { paramEntry 196 }

audioInvert1R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 1R"
    ::= { paramEntry 197 }

audioMixDown1R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 1R"
    ::= { paramEntry 198 }

audioSilence1R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 1R"
    ::= { paramEntry 199 }

audioOverload1R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 1R"
    ::= { paramEntry 200 }

audioTestTone1R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 1R"
    ::= { paramEntry 201 }

audioGain2L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 2L"
    ::= { paramEntry 202 }

audioMute2L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 2L"
    ::= { paramEntry 203 }

audioInvert2L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 2L"
    ::= { paramEntry 204 }

audioMixDown2L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 2L"
    ::= { paramEntry 205 }

audioSilence2L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 2L"
    ::= { paramEntry 206 }

audioOverload2L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 2L"
    ::= { paramEntry 207 }

audioTestTone2L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 2L"
    ::= { paramEntry 208 }

audioGain2R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 2R"
    ::= { paramEntry 209 }

audioMute2R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 2R"
    ::= { paramEntry 210 }

audioInvert2R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 2R"
    ::= { paramEntry 211 }

audioMixDown2R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 2R"
    ::= { paramEntry 212 }

audioSilence2R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 2R"
    ::= { paramEntry 213 }

audioOverload2R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 2R"
    ::= { paramEntry 214 }

audioTestTone2R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 2R"
    ::= { paramEntry 215 }

audioGain3L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 3L"
    ::= { paramEntry 216 }

audioMute3L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 3L"
    ::= { paramEntry 217 }

audioInvert3L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 3L"
    ::= { paramEntry 218 }

audioMixDown3L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 3L"
    ::= { paramEntry 219 }

audioSilence3L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 3L"
    ::= { paramEntry 220 }

audioOverload3L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 3L"
    ::= { paramEntry 221 }

audioTestTone3L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 3L"
    ::= { paramEntry 222 }

audioGain3R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 3R"
    ::= { paramEntry 223 }

audioMute3R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 3R"
    ::= { paramEntry 224 }

audioInvert3R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 3R"
    ::= { paramEntry 225 }

audioMixDown3R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 3R"
    ::= { paramEntry 226 }

audioSilence3R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 3R"
    ::= { paramEntry 227 }

audioOverload3R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 3R"
    ::= { paramEntry 228 }

audioTestTone3R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 3R"
    ::= { paramEntry 229 }

audioGain4L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 4L"
    ::= { paramEntry 230 }

audioMute4L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 4L"
    ::= { paramEntry 231 }

audioInvert4L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 4L"
    ::= { paramEntry 232 }

audioMixDown4L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 4L"
    ::= { paramEntry 233 }

audioSilence4L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 4L"
    ::= { paramEntry 234 }

audioOverload4L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 4L"
    ::= { paramEntry 235 }

audioTestTone4L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 4L"
    ::= { paramEntry 236 }

audioGain4R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 4R"
    ::= { paramEntry 237 }

audioMute4R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 4R"
    ::= { paramEntry 238 }

audioInvert4R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 4R"
    ::= { paramEntry 239 }

audioMixDown4R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 4R"
    ::= { paramEntry 240 }

audioSilence4R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 4R"
    ::= { paramEntry 241 }

audioOverload4R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 4R"
    ::= { paramEntry 242 }

audioTestTone4R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 4R"
    ::= { paramEntry 243 }

audioGain5L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 5L"
    ::= { paramEntry 244 }

audioMute5L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 5L"
    ::= { paramEntry 245 }

audioInvert5L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 5L"
    ::= { paramEntry 246 }

audioMixDown5L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 5L"
    ::= { paramEntry 247 }

audioSilence5L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 5L"
    ::= { paramEntry 248 }

audioOverload5L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 5L"
    ::= { paramEntry 249 }

audioTestTone5L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 5L"
    ::= { paramEntry 250 }

audioGain5R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 5R"
    ::= { paramEntry 251 }

audioMute5R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 5R"
    ::= { paramEntry 252 }

audioInvert5R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 5R"
    ::= { paramEntry 253 }

audioMixDown5R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 5R"
    ::= { paramEntry 254 }

audioSilence5R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 5R"
    ::= { paramEntry 255 }

audioOverload5R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 5R"
    ::= { paramEntry 256 }

audioTestTone5R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 5R"
    ::= { paramEntry 257 }

audioGain6L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 6L"
    ::= { paramEntry 258 }

audioMute6L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 6L"
    ::= { paramEntry 259 }

audioInvert6L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 6L"
    ::= { paramEntry 260 }

audioMixDown6L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 6L"
    ::= { paramEntry 261 }

audioSilence6L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 6L"
    ::= { paramEntry 262 }

audioOverload6L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 6L"
    ::= { paramEntry 263 }

audioTestTone6L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 6L"
    ::= { paramEntry 264 }

audioGain6R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 6R"
    ::= { paramEntry 265 }

audioMute6R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 6R"
    ::= { paramEntry 266 }

audioInvert6R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 6R"
    ::= { paramEntry 267 }

audioMixDown6R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 6R"
    ::= { paramEntry 268 }

audioSilence6R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 6R"
    ::= { paramEntry 269 }

audioOverload6R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 6R"
    ::= { paramEntry 270 }

audioTestTone6R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 6R"
    ::= { paramEntry 271 }

audioGain7L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 7L"
    ::= { paramEntry 272 }

audioMute7L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 7L"
    ::= { paramEntry 273 }

audioInvert7L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 7L"
    ::= { paramEntry 274 }

audioMixDown7L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 7L"
    ::= { paramEntry 275 }

audioSilence7L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 7L"
    ::= { paramEntry 276 }

audioOverload7L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 7L"
    ::= { paramEntry 277 }

audioTestTone7L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 7L"
    ::= { paramEntry 278 }

audioGain7R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 7R"
    ::= { paramEntry 279 }

audioMute7R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 7R"
    ::= { paramEntry 280 }

audioInvert7R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 7R"
    ::= { paramEntry 281 }

audioMixDown7R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 7R"
    ::= { paramEntry 282 }

audioSilence7R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 7R"
    ::= { paramEntry 283 }

audioOverload7R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 7R"
    ::= { paramEntry 284 }

audioTestTone7R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 7R"
    ::= { paramEntry 285 }

audioGain8L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 8L"
    ::= { paramEntry 286 }

audioMute8L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 8L"
    ::= { paramEntry 287 }

audioInvert8L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 8L"
    ::= { paramEntry 288 }

audioMixDown8L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 8L"
    ::= { paramEntry 289 }

audioSilence8L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 8L"
    ::= { paramEntry 290 }

audioOverload8L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 8L"
    ::= { paramEntry 291 }

audioTestTone8L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 8L"
    ::= { paramEntry 292 }

audioGain8R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 8R"
    ::= { paramEntry 293 }

audioMute8R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 8R"
    ::= { paramEntry 294 }

audioInvert8R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 8R"
    ::= { paramEntry 295 }

audioMixDown8R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 8R"
    ::= { paramEntry 296 }

audioSilence8R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 8R"
    ::= { paramEntry 297 }

audioOverload8R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 8R"
    ::= { paramEntry 298 }

audioTestTone8R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 8R"
    ::= { paramEntry 299 }

audioGain9L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 9L"
    ::= { paramEntry 300 }

audioMute9L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 9L"
    ::= { paramEntry 301 }

audioInvert9L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 9L"
    ::= { paramEntry 302 }

audioMixDown9L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 9L"
    ::= { paramEntry 303 }

audioSilence9L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 9L"
    ::= { paramEntry 304 }

audioOverload9L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 9L"
    ::= { paramEntry 305 }

audioTestTone9L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 9L"
    ::= { paramEntry 306 }

audioGain9R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 9R"
    ::= { paramEntry 307 }

audioMute9R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 9R"
    ::= { paramEntry 308 }

audioInvert9R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 9R"
    ::= { paramEntry 309 }

audioMixDown9R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 9R"
    ::= { paramEntry 310 }

audioSilence9R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 9R"
    ::= { paramEntry 311 }

audioOverload9R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 9R"
    ::= { paramEntry 312 }

audioTestTone9R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 9R"
    ::= { paramEntry 313 }

audioGain10L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 10L"
    ::= { paramEntry 314 }

audioMute10L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 10L"
    ::= { paramEntry 315 }

audioInvert10L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 10L"
    ::= { paramEntry 316 }

audioMixDown10L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 10L"
    ::= { paramEntry 317 }

audioSilence10L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 10L"
    ::= { paramEntry 318 }

audioOverload10L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 10L"
    ::= { paramEntry 319 }

audioTestTone10L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 10L"
    ::= { paramEntry 320 }

audioGain10R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 10R"
    ::= { paramEntry 321 }

audioMute10R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 10R"
    ::= { paramEntry 322 }

audioInvert10R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 10R"
    ::= { paramEntry 323 }

audioMixDown10R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 10R"
    ::= { paramEntry 324 }

audioSilence10R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 10R"
    ::= { paramEntry 325 }

audioOverload10R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 10R"
    ::= { paramEntry 326 }

audioTestTone10R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 10R"
    ::= { paramEntry 327 }

audioGain11L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 11L"
    ::= { paramEntry 328 }

audioMute11L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 11L"
    ::= { paramEntry 329 }

audioInvert11L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 11L"
    ::= { paramEntry 330 }

audioMixDown11L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 11L"
    ::= { paramEntry 331 }

audioSilence11L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 11L"
    ::= { paramEntry 332 }

audioOverload11L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 11L"
    ::= { paramEntry 333 }

audioTestTone11L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 11L"
    ::= { paramEntry 334 }

audioGain11R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 11R"
    ::= { paramEntry 335 }

audioMute11R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 11R"
    ::= { paramEntry 336 }

audioInvert11R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 11R"
    ::= { paramEntry 337 }

audioMixDown11R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 11R"
    ::= { paramEntry 338 }

audioSilence11R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 11R"
    ::= { paramEntry 339 }

audioOverload11R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 11R"
    ::= { paramEntry 340 }

audioTestTone11R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 11R"
    ::= { paramEntry 341 }

audioGain12L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 12L"
    ::= { paramEntry 342 }

audioMute12L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 12L"
    ::= { paramEntry 343 }

audioInvert12L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 12L"
    ::= { paramEntry 344 }

audioMixDown12L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 12L"
    ::= { paramEntry 345 }

audioSilence12L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 12L"
    ::= { paramEntry 346 }

audioOverload12L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 12L"
    ::= { paramEntry 347 }

audioTestTone12L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 12L"
    ::= { paramEntry 348 }

audioGain12R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 12R"
    ::= { paramEntry 349 }

audioMute12R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 12R"
    ::= { paramEntry 350 }

audioInvert12R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 12R"
    ::= { paramEntry 351 }

audioMixDown12R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 12R"
    ::= { paramEntry 352 }

audioSilence12R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 12R"
    ::= { paramEntry 353 }

audioOverload12R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 12R"
    ::= { paramEntry 354 }

audioTestTone12R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 12R"
    ::= { paramEntry 355 }

audioGain13L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 13L"
    ::= { paramEntry 356 }

audioMute13L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 13L"
    ::= { paramEntry 357 }

audioInvert13L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 13L"
    ::= { paramEntry 358 }

audioMixDown13L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 13L"
    ::= { paramEntry 359 }

audioSilence13L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 13L"
    ::= { paramEntry 360 }

audioOverload13L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 13L"
    ::= { paramEntry 361 }

audioTestTone13L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 13L"
    ::= { paramEntry 362 }

audioGain13R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 13R"
    ::= { paramEntry 363 }

audioMute13R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 13R"
    ::= { paramEntry 364 }

audioInvert13R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 13R"
    ::= { paramEntry 365 }

audioMixDown13R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 13R"
    ::= { paramEntry 366 }

audioSilence13R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 13R"
    ::= { paramEntry 367 }

audioOverload13R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 13R"
    ::= { paramEntry 368 }

audioTestTone13R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 13R"
    ::= { paramEntry 369 }

audioGain14L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 14L"
    ::= { paramEntry 370 }

audioMute14L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 14L"
    ::= { paramEntry 371 }

audioInvert14L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 14L"
    ::= { paramEntry 372 }

audioMixDown14L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 14L"
    ::= { paramEntry 373 }

audioSilence14L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 14L"
    ::= { paramEntry 374 }

audioOverload14L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 14L"
    ::= { paramEntry 375 }

audioTestTone14L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 14L"
    ::= { paramEntry 376 }

audioGain14R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 14R"
    ::= { paramEntry 377 }

audioMute14R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 14R"
    ::= { paramEntry 378 }

audioInvert14R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 14R"
    ::= { paramEntry 379 }

audioMixDown14R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 14R"
    ::= { paramEntry 380 }

audioSilence14R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 14R"
    ::= { paramEntry 381 }

audioOverload14R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 14R"
    ::= { paramEntry 382 }

audioTestTone14R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 14R"
    ::= { paramEntry 383 }

audioGain15L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 15L"
    ::= { paramEntry 384 }

audioMute15L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 15L"
    ::= { paramEntry 385 }

audioInvert15L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 15L"
    ::= { paramEntry 386 }

audioMixDown15L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 15L"
    ::= { paramEntry 387 }

audioSilence15L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 15L"
    ::= { paramEntry 388 }

audioOverload15L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 15L"
    ::= { paramEntry 389 }

audioTestTone15L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 15L"
    ::= { paramEntry 390 }

audioGain15R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 15R"
    ::= { paramEntry 391 }

audioMute15R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 15R"
    ::= { paramEntry 392 }

audioInvert15R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 15R"
    ::= { paramEntry 393 }

audioMixDown15R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 15R"
    ::= { paramEntry 394 }

audioSilence15R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 15R"
    ::= { paramEntry 395 }

audioOverload15R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 15R"
    ::= { paramEntry 396 }

audioTestTone15R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 15R"
    ::= { paramEntry 397 }

audioGain16L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 16L"
    ::= { paramEntry 398 }

audioMute16L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 16L"
    ::= { paramEntry 399 }

audioInvert16L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 16L"
    ::= { paramEntry 400 }

audioMixDown16L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 16L"
    ::= { paramEntry 401 }

audioSilence16L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 16L"
    ::= { paramEntry 402 }

audioOverload16L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 16L"
    ::= { paramEntry 403 }

audioTestTone16L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 16L"
    ::= { paramEntry 404 }

audioGain16R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 16R"
    ::= { paramEntry 405 }

audioMute16R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 16R"
    ::= { paramEntry 406 }

audioInvert16R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 16R"
    ::= { paramEntry 407 }

audioMixDown16R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 16R"
    ::= { paramEntry 408 }

audioSilence16R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 16R"
    ::= { paramEntry 409 }

audioOverload16R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 16R"
    ::= { paramEntry 410 }

audioTestTone16R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 16R"
    ::= { paramEntry 411 }

aESPortAssignment1 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 1 as input or output"
    ::= { paramEntry 412 }

audioContentAES1 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 1"
    ::= { paramEntry 413 }

audioContentStatusAES1 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 1"
    ::= { paramEntry 414 }

audioContentSDI1 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 415 }

audioContentStatusSDI1 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.%2"
    ::= { paramEntry 416 }

aESPortAssignment2 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 2 as input or output"
    ::= { paramEntry 417 }

audioContentAES2 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 2"
    ::= { paramEntry 418 }

audioContentStatusAES2 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 2"
    ::= { paramEntry 419 }

audioContentSDI2 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 420 }

audioContentStatusSDI2 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 2.%2"
    ::= { paramEntry 421 }

aESPortAssignment3 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 3 as input or output"
    ::= { paramEntry 422 }

audioContentAES3 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 3"
    ::= { paramEntry 423 }

audioContentStatusAES3 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 3"
    ::= { paramEntry 424 }

audioContentSDI3 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 425 }

audioContentStatusSDI3 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 3.%2"
    ::= { paramEntry 426 }

aESPortAssignment4 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 4 as input or output"
    ::= { paramEntry 427 }

audioContentAES4 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 4"
    ::= { paramEntry 428 }

audioContentStatusAES4 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 4"
    ::= { paramEntry 429 }

audioContentSDI4 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 430 }

audioContentStatusSDI4 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 4.%2"
    ::= { paramEntry 431 }

aESPortAssignment5 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 5 as input or output"
    ::= { paramEntry 432 }

audioContentAES5 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 5"
    ::= { paramEntry 433 }

audioContentStatusAES5 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 5"
    ::= { paramEntry 434 }

audioContentSDI5 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 435 }

audioContentStatusSDI5 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 5.%2"
    ::= { paramEntry 436 }

aESPortAssignment6 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 6 as input or output"
    ::= { paramEntry 437 }

audioContentAES6 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 6"
    ::= { paramEntry 438 }

audioContentStatusAES6 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 6"
    ::= { paramEntry 439 }

audioContentSDI6 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 440 }

audioContentStatusSDI6 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 6.%2"
    ::= { paramEntry 441 }

aESPortAssignment7 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 7 as input or output"
    ::= { paramEntry 442 }

audioContentAES7 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 7"
    ::= { paramEntry 443 }

audioContentStatusAES7 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 7"
    ::= { paramEntry 444 }

audioContentSDI7 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 445 }

audioContentStatusSDI7 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 7.%2"
    ::= { paramEntry 446 }

aESPortAssignment8 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 8 as input or output"
    ::= { paramEntry 447 }

audioContentAES8 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 8"
    ::= { paramEntry 448 }

audioContentStatusAES8 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 8"
    ::= { paramEntry 449 }

audioContentSDI8 OBJECT-TYPE
    SYNTAX TypeAudioContentAES1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 450 }

audioContentStatusSDI8 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusAES1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 8.%2"
    ::= { paramEntry 451 }

outStandard OBJECT-TYPE
    SYNTAX TypeOutStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI output"
    ::= { paramEntry 452 }

inStandard OBJECT-TYPE
    SYNTAX TypeOutStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input status indication"
    ::= { paramEntry 453 }

delayVideoUserMode OBJECT-TYPE
    SYNTAX TypeDelayVideoUserMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "User-defined video delay control mode (frames / lines / pixels or milliseconds)"
    ::= { paramEntry 454 }

delayVideoFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in frames. Combine with Delay/Video/Lines and Delay/Video/Pixels for total delay"
    ::= { paramEntry 455 }

delayVideoLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in lines. Combine with Delay/Video/Frames and Delay/Video/Pixels for total delay"
    ::= { paramEntry 456 }

delayVideoPixels OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in pixels. Combine with Delay/Video/Frames and Delay/Video/Lines for total delay"
    ::= { paramEntry 457 }

delayVideoTotalMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Total SDI output delay in milliseconds"
    ::= { paramEntry 458 }

delayAudioSDIIn11 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 459 }

delayAudioSDIIn12 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 460 }

delayAudioSDIIn21 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 461 }

delayAudioSDIIn22 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 462 }

delayAudioSDIIn31 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 463 }

delayAudioSDIIn32 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 464 }

delayAudioSDIIn41 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 465 }

delayAudioSDIIn42 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 466 }

delayAudioSDIOut11 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 467 }

delayAudioSDIOut12 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 468 }

delayAudioSDIOut21 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 469 }

delayAudioSDIOut22 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 470 }

delayAudioSDIOut31 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 471 }

delayAudioSDIOut32 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 472 }

delayAudioSDIOut41 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 473 }

delayAudioSDIOut42 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 474 }

delayAudioAESIn1 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 475 }

delayAudioAESIn2 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 476 }

delayAudioAESIn3 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 477 }

delayAudioAESIn4 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 478 }

delayAudioAESIn5 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 479 }

delayAudioAESIn6 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 480 }

delayAudioAESIn7 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 481 }

delayAudioAESIn8 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 482 }

delayAudioAESOut1 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 483 }

delayAudioAESOut2 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 484 }

delayAudioAESOut3 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 485 }

delayAudioAESOut4 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 486 }

delayAudioAESOut5 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 487 }

delayAudioAESOut6 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 488 }

delayAudioAESOut7 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 489 }

delayAudioAESOut8 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 490 }

referenceLock OBJECT-TYPE
    SYNTAX TypeReferenceLock
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock all outputs to one of *RefIn *SDI1In *SDI2In"
    ::= { paramEntry 491 }

referenceStatus OBJECT-TYPE
    SYNTAX TypeOutStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of Reference Input"
    ::= { paramEntry 492 }

referenceSource OBJECT-TYPE
    SYNTAX TypeReferenceSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
    ::= { paramEntry 493 }

freqPreselect OBJECT-TYPE
    SYNTAX TypeFreqPreselect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the frequency domain for the complete device (inputs, reference and outputs)"
    ::= { paramEntry 494 }

freq OBJECT-TYPE
    SYNTAX TypeFreq
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
    ::= { paramEntry 495 }

gPIFunc OBJECT-TYPE
    SYNTAX TypeGPIFunc
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify influence of GPI input"
    ::= { paramEntry 496 }

gPI2Func OBJECT-TYPE
    SYNTAX TypeGPIFunc
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify influence of GPI input 2"
    ::= { paramEntry 497 }

inputToRefTolerance OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Open a tolerance window in the relative timing between SDI In and REF In.<br>To be applied for modifying the timing behavior in Framesync mode.When modified to ON, the SDI Input is accepted as aligned to REF even if it arrives up to 12usec later than REF.<br>See User Manual for details."
    ::= { paramEntry 498 }

syncMode1 OBJECT-TYPE
    SYNTAX TypeSyncMode1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Synchronization Mode for SDI Channel 1"
    ::= { paramEntry 499 }

inputFreezeSDI1 OBJECT-TYPE
    SYNTAX TypeInputFreezeSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
    ::= { paramEntry 500 }

syncSDIIn1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed).<br>This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.<br>NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path."
    ::= { paramEntry 501 }

out1ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable aperture correction"
    ::= { paramEntry 502 }

out1ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: aperture correction level"
    ::= { paramEntry 503 }

out1HBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable H-Blanking"
    ::= { paramEntry 504 }

out1VBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable V-Blanking"
    ::= { paramEntry 505 }

out1HFlip OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: Mirror the output image on the vertical center axis (flip in H direction)."
    ::= { paramEntry 506 }

out1Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust Video Gain"
    ::= { paramEntry 507 }

out1Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Saturation"
    ::= { paramEntry 508 }

out1BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
    ::= { paramEntry 509 }

out1Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Hue"
    ::= { paramEntry 510 }

out1TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 511 }

out1TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 512 }

out1TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable preselected test pattern"
    ::= { paramEntry 513 }

out1IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 514 }

audioDelayAESOut OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "additional audio delay [ms] for AES-OUT"
    ::= { paramEntry 515 }

audioDelaySDI1 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "additional audio delay [ms] for audio sourced by SDI 1"
    ::= { paramEntry 516 }

audioDelaySDIOut1 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 1"
    ::= { paramEntry 517 }

presetsGPIOn OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 518 }

presetsGPIOff OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
    ::= { paramEntry 519 }

presetsGPIOffOn OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when GPI 1 is Off and GPI 2 is On.
That applies only if both GPI Influence parameters are set to switch User presets."
    ::= { paramEntry 520 }

presetsGPIOnOn OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select user preset that will be activated when both GPIs are On. 
That applies only if both GPI Influence parameters are set to switch User presets."
    ::= { paramEntry 521 }

inputToRefDelay1H OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Horizontal delay between Input 1 and Reference"
    ::= { paramEntry 522 }

inputToRefDelay1V OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Vertical delay between Input 1 and Reference"
    ::= { paramEntry 523 }

out1ClipHeadroom OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: Clips Y code values outside the range of 40h to 3ACh
 and Cr, Cb code values outside the range of 40h to 3C0h."
    ::= { paramEntry 524 }

out1FreezeMode OBJECT-TYPE
    SYNTAX TypeOut1FreezeMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify freeze mode if input is missing."
    ::= { paramEntry 525 }

out1TotalProcTime OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show the total delay comprising the processing time and the user delay <br>on the used path from SDI Input to SDI Output 1"
    ::= { paramEntry 526 }

aSCA OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This function will take control over all internal audio crossbars and embedders.<br>For all incoming audio streams, it will automatically select the appropriate synchronization method according to their content (PCM-audio, DolbyE, other non-PCM data). Audio-Outputs will be routed so they contain the same audio content as the input.<br>See user-manual for further details."
    ::= { paramEntry 527 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 533 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 534 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 535 }

eventPrimaryPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Primary Power missing"
    ::= { paramEntry 536 }

eventRedundantPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Redundant Power missing"
    ::= { paramEntry 537 }

eventFanFailure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Fan Failure"
    ::= { paramEntry 538 }

eventReferenceNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Reference No Input"
    ::= { paramEntry 539 }

eventSDIInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: SDI Input 1 No Input"
    ::= { paramEntry 540 }

eventCouldnotlocktoReference OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Could not lock to Reference"
    ::= { paramEntry 541 }

eventCouldnotlocktoSDIInput1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Could not lock to SDI Input 1"
    ::= { paramEntry 542 }

eventAESInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 1 No Input"
    ::= { paramEntry 543 }

eventAESInput2NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 2 No Input"
    ::= { paramEntry 544 }

eventAESInput3NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 3 No Input"
    ::= { paramEntry 545 }

eventAESInput4NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 4 No Input"
    ::= { paramEntry 546 }

eventAESInput5NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 5 No Input"
    ::= { paramEntry 547 }

eventAESInput6NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 6 No Input"
    ::= { paramEntry 548 }

eventAESInput7NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 7 No Input"
    ::= { paramEntry 549 }

eventAESInput8NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 8 No Input"
    ::= { paramEntry 550 }

eventEmbedderMissingInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Embedder Missing Input"
    ::= { paramEntry 551 }

eventAESOutputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: AES Output No Input"
    ::= { paramEntry 552 }

presetsNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "maximum number of user presets"
    ::= { paramEntry 553 }

presetsActive OBJECT-TYPE
    SYNTAX TypePresetsGPIOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Active Preset.<br>NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka <i>Current</i>) and make the required modifications there."
    ::= { paramEntry 554 }

presetsSaveAs OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
    ::= { paramEntry 555 }

presetsCurrentSettingsBasedOn OBJECT-TYPE
    SYNTAX TypePresetsCurrentSettingsBasedOn
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Current Settings based on"
    ::= { paramEntry 556 }

presetsLoadToCurrent OBJECT-TYPE
    SYNTAX TypePresetsCurrentSettingsBasedOn
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Load a copy of the specified UserPreset as the current settings.<br>The current settings of the complete product will be overwritten. Reading the current value of this parameter tells you which of the available presets has been loaded last.<br>NOTE that the current settings can potentially differ from the loaded preset because individual changes may have been applied at any time."
    ::= { paramEntry 557 }

presetsName0 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 0"
    ::= { paramEntry 558 }

presetsName1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 1"
    ::= { paramEntry 559 }

presetsName2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 2"
    ::= { paramEntry 560 }

presetsName3 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 3"
    ::= { paramEntry 561 }

presetsName4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 4"
    ::= { paramEntry 562 }

presetsName5 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 5"
    ::= { paramEntry 563 }

presetsName6 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 6"
    ::= { paramEntry 564 }

presetsName7 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 7"
    ::= { paramEntry 565 }

delayAudioSDIOutGang OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gang-Mode: Couple all SDI Out Delay values (modify all delay controls synchronously)"
    ::= { paramEntry 566 }

delayAudioAESOutGang OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gang-Mode: Couple all AES Out Delay values (modify all delay controls synchronously)"
    ::= { paramEntry 567 }

eventPrimaryPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Primary Power missing"
    ::= { paramEntry 569 }

eventRedundantPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Redundant Power missing"
    ::= { paramEntry 570 }

eventFanFailureSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Fan Failure"
    ::= { paramEntry 571 }

eventReferenceNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Reference No Input"
    ::= { paramEntry 572 }

eventSDIInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 1 No Input"
    ::= { paramEntry 573 }

eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to Reference"
    ::= { paramEntry 574 }

eventCouldnotlocktoSDIInput1SNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to SDI Input 1"
    ::= { paramEntry 575 }

eventAESInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 1 No Input"
    ::= { paramEntry 576 }

eventAESInput2NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 2 No Input"
    ::= { paramEntry 577 }

eventAESInput3NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 3 No Input"
    ::= { paramEntry 578 }

eventAESInput4NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 4 No Input"
    ::= { paramEntry 579 }

eventAESInput5NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 5 No Input"
    ::= { paramEntry 580 }

eventAESInput6NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 6 No Input"
    ::= { paramEntry 581 }

eventAESInput7NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 7 No Input"
    ::= { paramEntry 582 }

eventAESInput8NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 8 No Input"
    ::= { paramEntry 583 }

eventEmbedderMissingInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Embedder Missing Input"
    ::= { paramEntry 584 }

eventAESOutputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output No Input"
    ::= { paramEntry 585 }

crossBarAudioOutEmbAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Crossbar for Embedded Audio Out AES"
    ::= { paramEntry 586 }

crossBarAudioOutAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Crossbar for External Audio Out AES"
    ::= { paramEntry 587 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 596 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PVD5810-D parameters"
    ::= { sw667 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PVD5810-D parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    backpanelStatus TypeBackpanelStatus,
    boardID Integer32,
    inAes1 TypeInAes1,
    inAes2 TypeInAes1,
    inAes3 TypeInAes1,
    inAes4 TypeInAes1,
    inAes5 TypeInAes1,
    inAes6 TypeInAes1,
    inAes7 TypeInAes1,
    inAes8 TypeInAes1,
    inGrp1 TypeInGrp1,
    inGrp2 TypeInGrp1,
    inGrp3 TypeInGrp1,
    inGrp4 TypeInGrp1,
    embedGroup1 OnOffValue,
    embedGroup2 OnOffValue,
    embedGroup3 OnOffValue,
    embedGroup4 OnOffValue,
    sampleRateConversion1 TypeSampleRateConversion1,
    sampleRateConversion2 TypeSampleRateConversion1,
    sampleRateConversion3 TypeSampleRateConversion1,
    sampleRateConversion4 TypeSampleRateConversion1,
    sampleRateConversion5 TypeSampleRateConversion1,
    sampleRateConversion6 TypeSampleRateConversion1,
    sampleRateConversion7 TypeSampleRateConversion1,
    sampleRateConversion8 TypeSampleRateConversion1,
    sampleRateConversion9 TypeSampleRateConversion1,
    sampleRateConversion10 TypeSampleRateConversion1,
    sampleRateConversion11 TypeSampleRateConversion1,
    sampleRateConversion12 TypeSampleRateConversion1,
    sampleRateConversion13 TypeSampleRateConversion1,
    sampleRateConversion14 TypeSampleRateConversion1,
    sampleRateConversion15 TypeSampleRateConversion1,
    sampleRateConversion16 TypeSampleRateConversion1,
    sourceEmbAESStereo112 TypeSourceEmbAESStereo112,
    sourceEmbAES11 TypeSourceEmbAES11,
    sourceEmbAES12 TypeSourceEmbAES11,
    sourceEmbAESStereo134 TypeSourceEmbAESStereo112,
    sourceEmbAES13 TypeSourceEmbAES11,
    sourceEmbAES14 TypeSourceEmbAES11,
    sourceEmbAESStereo212 TypeSourceEmbAESStereo112,
    sourceEmbAES21 TypeSourceEmbAES11,
    sourceEmbAES22 TypeSourceEmbAES11,
    sourceEmbAESStereo234 TypeSourceEmbAESStereo112,
    sourceEmbAES23 TypeSourceEmbAES11,
    sourceEmbAES24 TypeSourceEmbAES11,
    sourceEmbAESStereo312 TypeSourceEmbAESStereo112,
    sourceEmbAES31 TypeSourceEmbAES11,
    sourceEmbAES32 TypeSourceEmbAES11,
    sourceEmbAESStereo334 TypeSourceEmbAESStereo112,
    sourceEmbAES33 TypeSourceEmbAES11,
    sourceEmbAES34 TypeSourceEmbAES11,
    sourceEmbAESStereo412 TypeSourceEmbAESStereo112,
    sourceEmbAES41 TypeSourceEmbAES11,
    sourceEmbAES42 TypeSourceEmbAES11,
    sourceEmbAESStereo434 TypeSourceEmbAESStereo112,
    sourceEmbAES43 TypeSourceEmbAES11,
    sourceEmbAES44 TypeSourceEmbAES11,
    testToneFrequency TypeTestToneFrequency,
    dolbyFrameSyncSource TypeDolbyFrameSyncSource,
    deleteGroup1 TypeDeleteGroup1,
    deleteGroup2 TypeDeleteGroup1,
    deleteGroup3 TypeDeleteGroup1,
    deleteGroup4 TypeDeleteGroup1,
    embedBits1 TypeEmbedBits1,
    embedBits2 TypeEmbedBits1,
    embedBits3 TypeEmbedBits1,
    embedBits4 TypeEmbedBits1,
    cSBTransSDTV OnOffValue,
    embedded11 TypeEmbedded11,
    embedded12 TypeEmbedded11,
    embedded13 TypeEmbedded11,
    embedded14 TypeEmbedded11,
    embedded21 TypeEmbedded11,
    embedded22 TypeEmbedded11,
    embedded23 TypeEmbedded11,
    embedded24 TypeEmbedded11,
    embedded31 TypeEmbedded11,
    embedded32 TypeEmbedded11,
    embedded33 TypeEmbedded11,
    embedded34 TypeEmbedded11,
    embedded41 TypeEmbedded11,
    embedded42 TypeEmbedded11,
    embedded43 TypeEmbedded11,
    embedded44 TypeEmbedded11,
    sourceAESOut11 TypeSourceAESOut11,
    sourceAESOut12 TypeSourceAESOut11,
    sourceAESOut21 TypeSourceAESOut11,
    sourceAESOut22 TypeSourceAESOut11,
    sourceAESOut31 TypeSourceAESOut11,
    sourceAESOut32 TypeSourceAESOut11,
    sourceAESOut41 TypeSourceAESOut11,
    sourceAESOut42 TypeSourceAESOut11,
    sourceAESOut51 TypeSourceAESOut11,
    sourceAESOut52 TypeSourceAESOut11,
    sourceAESOut61 TypeSourceAESOut11,
    sourceAESOut62 TypeSourceAESOut11,
    sourceAESOut71 TypeSourceAESOut11,
    sourceAESOut72 TypeSourceAESOut11,
    sourceAESOut81 TypeSourceAESOut11,
    sourceAESOut82 TypeSourceAESOut11,
    vFlag OnOffValue,
    deembPhaseSync OnOffValue,
    deembPhaseSyncVerify TypeDeembPhaseSyncVerify,
    audioGain1L FixedPointValue1,
    audioMute1L TypeAudioMute1L,
    audioInvert1L TypeAudioInvert1L,
    audioMixDown1L OnOffValue,
    audioSilence1L TypeAudioSilence1L,
    audioOverload1L TypeAudioOverload1L,
    audioTestTone1L OnOffValue,
    audioGain1R FixedPointValue1,
    audioMute1R TypeAudioMute1L,
    audioInvert1R TypeAudioInvert1L,
    audioMixDown1R OnOffValue,
    audioSilence1R TypeAudioSilence1L,
    audioOverload1R TypeAudioOverload1L,
    audioTestTone1R OnOffValue,
    audioGain2L FixedPointValue1,
    audioMute2L TypeAudioMute1L,
    audioInvert2L TypeAudioInvert1L,
    audioMixDown2L OnOffValue,
    audioSilence2L TypeAudioSilence1L,
    audioOverload2L TypeAudioOverload1L,
    audioTestTone2L OnOffValue,
    audioGain2R FixedPointValue1,
    audioMute2R TypeAudioMute1L,
    audioInvert2R TypeAudioInvert1L,
    audioMixDown2R OnOffValue,
    audioSilence2R TypeAudioSilence1L,
    audioOverload2R TypeAudioOverload1L,
    audioTestTone2R OnOffValue,
    audioGain3L FixedPointValue1,
    audioMute3L TypeAudioMute1L,
    audioInvert3L TypeAudioInvert1L,
    audioMixDown3L OnOffValue,
    audioSilence3L TypeAudioSilence1L,
    audioOverload3L TypeAudioOverload1L,
    audioTestTone3L OnOffValue,
    audioGain3R FixedPointValue1,
    audioMute3R TypeAudioMute1L,
    audioInvert3R TypeAudioInvert1L,
    audioMixDown3R OnOffValue,
    audioSilence3R TypeAudioSilence1L,
    audioOverload3R TypeAudioOverload1L,
    audioTestTone3R OnOffValue,
    audioGain4L FixedPointValue1,
    audioMute4L TypeAudioMute1L,
    audioInvert4L TypeAudioInvert1L,
    audioMixDown4L OnOffValue,
    audioSilence4L TypeAudioSilence1L,
    audioOverload4L TypeAudioOverload1L,
    audioTestTone4L OnOffValue,
    audioGain4R FixedPointValue1,
    audioMute4R TypeAudioMute1L,
    audioInvert4R TypeAudioInvert1L,
    audioMixDown4R OnOffValue,
    audioSilence4R TypeAudioSilence1L,
    audioOverload4R TypeAudioOverload1L,
    audioTestTone4R OnOffValue,
    audioGain5L FixedPointValue1,
    audioMute5L TypeAudioMute1L,
    audioInvert5L TypeAudioInvert1L,
    audioMixDown5L OnOffValue,
    audioSilence5L TypeAudioSilence1L,
    audioOverload5L TypeAudioOverload1L,
    audioTestTone5L OnOffValue,
    audioGain5R FixedPointValue1,
    audioMute5R TypeAudioMute1L,
    audioInvert5R TypeAudioInvert1L,
    audioMixDown5R OnOffValue,
    audioSilence5R TypeAudioSilence1L,
    audioOverload5R TypeAudioOverload1L,
    audioTestTone5R OnOffValue,
    audioGain6L FixedPointValue1,
    audioMute6L TypeAudioMute1L,
    audioInvert6L TypeAudioInvert1L,
    audioMixDown6L OnOffValue,
    audioSilence6L TypeAudioSilence1L,
    audioOverload6L TypeAudioOverload1L,
    audioTestTone6L OnOffValue,
    audioGain6R FixedPointValue1,
    audioMute6R TypeAudioMute1L,
    audioInvert6R TypeAudioInvert1L,
    audioMixDown6R OnOffValue,
    audioSilence6R TypeAudioSilence1L,
    audioOverload6R TypeAudioOverload1L,
    audioTestTone6R OnOffValue,
    audioGain7L FixedPointValue1,
    audioMute7L TypeAudioMute1L,
    audioInvert7L TypeAudioInvert1L,
    audioMixDown7L OnOffValue,
    audioSilence7L TypeAudioSilence1L,
    audioOverload7L TypeAudioOverload1L,
    audioTestTone7L OnOffValue,
    audioGain7R FixedPointValue1,
    audioMute7R TypeAudioMute1L,
    audioInvert7R TypeAudioInvert1L,
    audioMixDown7R OnOffValue,
    audioSilence7R TypeAudioSilence1L,
    audioOverload7R TypeAudioOverload1L,
    audioTestTone7R OnOffValue,
    audioGain8L FixedPointValue1,
    audioMute8L TypeAudioMute1L,
    audioInvert8L TypeAudioInvert1L,
    audioMixDown8L OnOffValue,
    audioSilence8L TypeAudioSilence1L,
    audioOverload8L TypeAudioOverload1L,
    audioTestTone8L OnOffValue,
    audioGain8R FixedPointValue1,
    audioMute8R TypeAudioMute1L,
    audioInvert8R TypeAudioInvert1L,
    audioMixDown8R OnOffValue,
    audioSilence8R TypeAudioSilence1L,
    audioOverload8R TypeAudioOverload1L,
    audioTestTone8R OnOffValue,
    audioGain9L FixedPointValue1,
    audioMute9L TypeAudioMute1L,
    audioInvert9L TypeAudioInvert1L,
    audioMixDown9L OnOffValue,
    audioSilence9L TypeAudioSilence1L,
    audioOverload9L TypeAudioOverload1L,
    audioTestTone9L OnOffValue,
    audioGain9R FixedPointValue1,
    audioMute9R TypeAudioMute1L,
    audioInvert9R TypeAudioInvert1L,
    audioMixDown9R OnOffValue,
    audioSilence9R TypeAudioSilence1L,
    audioOverload9R TypeAudioOverload1L,
    audioTestTone9R OnOffValue,
    audioGain10L FixedPointValue1,
    audioMute10L TypeAudioMute1L,
    audioInvert10L TypeAudioInvert1L,
    audioMixDown10L OnOffValue,
    audioSilence10L TypeAudioSilence1L,
    audioOverload10L TypeAudioOverload1L,
    audioTestTone10L OnOffValue,
    audioGain10R FixedPointValue1,
    audioMute10R TypeAudioMute1L,
    audioInvert10R TypeAudioInvert1L,
    audioMixDown10R OnOffValue,
    audioSilence10R TypeAudioSilence1L,
    audioOverload10R TypeAudioOverload1L,
    audioTestTone10R OnOffValue,
    audioGain11L FixedPointValue1,
    audioMute11L TypeAudioMute1L,
    audioInvert11L TypeAudioInvert1L,
    audioMixDown11L OnOffValue,
    audioSilence11L TypeAudioSilence1L,
    audioOverload11L TypeAudioOverload1L,
    audioTestTone11L OnOffValue,
    audioGain11R FixedPointValue1,
    audioMute11R TypeAudioMute1L,
    audioInvert11R TypeAudioInvert1L,
    audioMixDown11R OnOffValue,
    audioSilence11R TypeAudioSilence1L,
    audioOverload11R TypeAudioOverload1L,
    audioTestTone11R OnOffValue,
    audioGain12L FixedPointValue1,
    audioMute12L TypeAudioMute1L,
    audioInvert12L TypeAudioInvert1L,
    audioMixDown12L OnOffValue,
    audioSilence12L TypeAudioSilence1L,
    audioOverload12L TypeAudioOverload1L,
    audioTestTone12L OnOffValue,
    audioGain12R FixedPointValue1,
    audioMute12R TypeAudioMute1L,
    audioInvert12R TypeAudioInvert1L,
    audioMixDown12R OnOffValue,
    audioSilence12R TypeAudioSilence1L,
    audioOverload12R TypeAudioOverload1L,
    audioTestTone12R OnOffValue,
    audioGain13L FixedPointValue1,
    audioMute13L TypeAudioMute1L,
    audioInvert13L TypeAudioInvert1L,
    audioMixDown13L OnOffValue,
    audioSilence13L TypeAudioSilence1L,
    audioOverload13L TypeAudioOverload1L,
    audioTestTone13L OnOffValue,
    audioGain13R FixedPointValue1,
    audioMute13R TypeAudioMute1L,
    audioInvert13R TypeAudioInvert1L,
    audioMixDown13R OnOffValue,
    audioSilence13R TypeAudioSilence1L,
    audioOverload13R TypeAudioOverload1L,
    audioTestTone13R OnOffValue,
    audioGain14L FixedPointValue1,
    audioMute14L TypeAudioMute1L,
    audioInvert14L TypeAudioInvert1L,
    audioMixDown14L OnOffValue,
    audioSilence14L TypeAudioSilence1L,
    audioOverload14L TypeAudioOverload1L,
    audioTestTone14L OnOffValue,
    audioGain14R FixedPointValue1,
    audioMute14R TypeAudioMute1L,
    audioInvert14R TypeAudioInvert1L,
    audioMixDown14R OnOffValue,
    audioSilence14R TypeAudioSilence1L,
    audioOverload14R TypeAudioOverload1L,
    audioTestTone14R OnOffValue,
    audioGain15L FixedPointValue1,
    audioMute15L TypeAudioMute1L,
    audioInvert15L TypeAudioInvert1L,
    audioMixDown15L OnOffValue,
    audioSilence15L TypeAudioSilence1L,
    audioOverload15L TypeAudioOverload1L,
    audioTestTone15L OnOffValue,
    audioGain15R FixedPointValue1,
    audioMute15R TypeAudioMute1L,
    audioInvert15R TypeAudioInvert1L,
    audioMixDown15R OnOffValue,
    audioSilence15R TypeAudioSilence1L,
    audioOverload15R TypeAudioOverload1L,
    audioTestTone15R OnOffValue,
    audioGain16L FixedPointValue1,
    audioMute16L TypeAudioMute1L,
    audioInvert16L TypeAudioInvert1L,
    audioMixDown16L OnOffValue,
    audioSilence16L TypeAudioSilence1L,
    audioOverload16L TypeAudioOverload1L,
    audioTestTone16L OnOffValue,
    audioGain16R FixedPointValue1,
    audioMute16R TypeAudioMute1L,
    audioInvert16R TypeAudioInvert1L,
    audioMixDown16R OnOffValue,
    audioSilence16R TypeAudioSilence1L,
    audioOverload16R TypeAudioOverload1L,
    audioTestTone16R OnOffValue,
    aESPortAssignment1 TypeAESPortAssignment1,
    audioContentAES1 TypeAudioContentAES1,
    audioContentStatusAES1 TypeAudioContentStatusAES1,
    audioContentSDI1 TypeAudioContentAES1,
    audioContentStatusSDI1 TypeAudioContentStatusAES1,
    aESPortAssignment2 TypeAESPortAssignment1,
    audioContentAES2 TypeAudioContentAES1,
    audioContentStatusAES2 TypeAudioContentStatusAES1,
    audioContentSDI2 TypeAudioContentAES1,
    audioContentStatusSDI2 TypeAudioContentStatusAES1,
    aESPortAssignment3 TypeAESPortAssignment1,
    audioContentAES3 TypeAudioContentAES1,
    audioContentStatusAES3 TypeAudioContentStatusAES1,
    audioContentSDI3 TypeAudioContentAES1,
    audioContentStatusSDI3 TypeAudioContentStatusAES1,
    aESPortAssignment4 TypeAESPortAssignment1,
    audioContentAES4 TypeAudioContentAES1,
    audioContentStatusAES4 TypeAudioContentStatusAES1,
    audioContentSDI4 TypeAudioContentAES1,
    audioContentStatusSDI4 TypeAudioContentStatusAES1,
    aESPortAssignment5 TypeAESPortAssignment1,
    audioContentAES5 TypeAudioContentAES1,
    audioContentStatusAES5 TypeAudioContentStatusAES1,
    audioContentSDI5 TypeAudioContentAES1,
    audioContentStatusSDI5 TypeAudioContentStatusAES1,
    aESPortAssignment6 TypeAESPortAssignment1,
    audioContentAES6 TypeAudioContentAES1,
    audioContentStatusAES6 TypeAudioContentStatusAES1,
    audioContentSDI6 TypeAudioContentAES1,
    audioContentStatusSDI6 TypeAudioContentStatusAES1,
    aESPortAssignment7 TypeAESPortAssignment1,
    audioContentAES7 TypeAudioContentAES1,
    audioContentStatusAES7 TypeAudioContentStatusAES1,
    audioContentSDI7 TypeAudioContentAES1,
    audioContentStatusSDI7 TypeAudioContentStatusAES1,
    aESPortAssignment8 TypeAESPortAssignment1,
    audioContentAES8 TypeAudioContentAES1,
    audioContentStatusAES8 TypeAudioContentStatusAES1,
    audioContentSDI8 TypeAudioContentAES1,
    audioContentStatusSDI8 TypeAudioContentStatusAES1,
    outStandard TypeOutStandard,
    inStandard TypeOutStandard,
    delayVideoUserMode TypeDelayVideoUserMode,
    delayVideoFrames Integer32,
    delayVideoLines Integer32,
    delayVideoPixels Integer32,
    delayVideoTotalMs FixedPointValue3,
    delayAudioSDIIn11 FixedPointValue2,
    delayAudioSDIIn12 FixedPointValue2,
    delayAudioSDIIn21 FixedPointValue2,
    delayAudioSDIIn22 FixedPointValue2,
    delayAudioSDIIn31 FixedPointValue2,
    delayAudioSDIIn32 FixedPointValue2,
    delayAudioSDIIn41 FixedPointValue2,
    delayAudioSDIIn42 FixedPointValue2,
    delayAudioSDIOut11 FixedPointValue2,
    delayAudioSDIOut12 FixedPointValue2,
    delayAudioSDIOut21 FixedPointValue2,
    delayAudioSDIOut22 FixedPointValue2,
    delayAudioSDIOut31 FixedPointValue2,
    delayAudioSDIOut32 FixedPointValue2,
    delayAudioSDIOut41 FixedPointValue2,
    delayAudioSDIOut42 FixedPointValue2,
    delayAudioAESIn1 FixedPointValue2,
    delayAudioAESIn2 FixedPointValue2,
    delayAudioAESIn3 FixedPointValue2,
    delayAudioAESIn4 FixedPointValue2,
    delayAudioAESIn5 FixedPointValue2,
    delayAudioAESIn6 FixedPointValue2,
    delayAudioAESIn7 FixedPointValue2,
    delayAudioAESIn8 FixedPointValue2,
    delayAudioAESOut1 FixedPointValue2,
    delayAudioAESOut2 FixedPointValue2,
    delayAudioAESOut3 FixedPointValue2,
    delayAudioAESOut4 FixedPointValue2,
    delayAudioAESOut5 FixedPointValue2,
    delayAudioAESOut6 FixedPointValue2,
    delayAudioAESOut7 FixedPointValue2,
    delayAudioAESOut8 FixedPointValue2,
    referenceLock TypeReferenceLock,
    referenceStatus TypeOutStandard,
    referenceSource TypeReferenceSource,
    freqPreselect TypeFreqPreselect,
    freq TypeFreq,
    gPIFunc TypeGPIFunc,
    gPI2Func TypeGPIFunc,
    inputToRefTolerance OnOffValue,
    syncMode1 TypeSyncMode1,
    inputFreezeSDI1 TypeInputFreezeSDI1,
    syncSDIIn1 OnOffValue,
    out1ApertureEnable OnOffValue,
    out1ApertureLevel Integer32,
    out1HBlank OnOffValue,
    out1VBlank OnOffValue,
    out1HFlip OnOffValue,
    out1Gain Integer32,
    out1Saturation Integer32,
    out1BlackLevel FixedPointValue1,
    out1Hue FixedPointValue1,
    out1TestPatternSelect TypeOut1TestPatternSelect,
    out1TestPatternStd TypeOut1TestPatternStd,
    out1TestPatternOn OnOffValue,
    out1IfNoInput TypeOut1IfNoInput,
    audioDelayAESOut FixedPointValue2,
    audioDelaySDI1 FixedPointValue2,
    audioDelaySDIOut1 FixedPointValue2,
    presetsGPIOn TypePresetsGPIOn,
    presetsGPIOff TypePresetsGPIOn,
    presetsGPIOffOn TypePresetsGPIOn,
    presetsGPIOnOn TypePresetsGPIOn,
    inputToRefDelay1H Integer32,
    inputToRefDelay1V Integer32,
    out1ClipHeadroom OnOffValue,
    out1FreezeMode TypeOut1FreezeMode,
    out1TotalProcTime FixedPointValue3,
    aSCA OnOffValue,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    eventPrimaryPowermissing OnOffValue,
    eventRedundantPowermissing OnOffValue,
    eventFanFailure OnOffValue,
    eventReferenceNoInput OnOffValue,
    eventSDIInput1NoInput OnOffValue,
    eventCouldnotlocktoReference OnOffValue,
    eventCouldnotlocktoSDIInput1 OnOffValue,
    eventAESInput1NoInput OnOffValue,
    eventAESInput2NoInput OnOffValue,
    eventAESInput3NoInput OnOffValue,
    eventAESInput4NoInput OnOffValue,
    eventAESInput5NoInput OnOffValue,
    eventAESInput6NoInput OnOffValue,
    eventAESInput7NoInput OnOffValue,
    eventAESInput8NoInput OnOffValue,
    eventEmbedderMissingInput OnOffValue,
    eventAESOutputNoInput OnOffValue,
    presetsNumber Integer32,
    presetsActive TypePresetsGPIOn,
    presetsSaveAs TypePresetsSaveAs,
    presetsCurrentSettingsBasedOn TypePresetsCurrentSettingsBasedOn,
    presetsLoadToCurrent TypePresetsCurrentSettingsBasedOn,
    presetsName0 DisplayString,
    presetsName1 DisplayString,
    presetsName2 DisplayString,
    presetsName3 DisplayString,
    presetsName4 DisplayString,
    presetsName5 DisplayString,
    presetsName6 DisplayString,
    presetsName7 DisplayString,
    delayAudioSDIOutGang OnOffValue,
    delayAudioAESOutGang OnOffValue,
    eventPrimaryPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventRedundantPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventFanFailureSNMP TypeEventPrimaryPowermissingSNMP,
    eventReferenceNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput1NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventCouldnotlocktoReferenceSNMP TypeEventPrimaryPowermissingSNMP,
    eventCouldnotlocktoSDIInput1SNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput1NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput2NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput3NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput4NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput5NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput6NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput7NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput8NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventEmbedderMissingInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESOutputNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    crossBarAudioOutEmbAES DisplayString,
    crossBarAudioOutAES DisplayString,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PVD5810-D"
    ::= { sw667 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        lock,
        locate,
        backpanelStatus,
        boardID,
        inAes1,
        inAes2,
        inAes3,
        inAes4,
        inAes5,
        inAes6,
        inAes7,
        inAes8,
        inGrp1,
        inGrp2,
        inGrp3,
        inGrp4,
        embedGroup1,
        embedGroup2,
        embedGroup3,
        embedGroup4,
        sampleRateConversion1,
        sampleRateConversion2,
        sampleRateConversion3,
        sampleRateConversion4,
        sampleRateConversion5,
        sampleRateConversion6,
        sampleRateConversion7,
        sampleRateConversion8,
        sampleRateConversion9,
        sampleRateConversion10,
        sampleRateConversion11,
        sampleRateConversion12,
        sampleRateConversion13,
        sampleRateConversion14,
        sampleRateConversion15,
        sampleRateConversion16,
        sourceEmbAESStereo112,
        sourceEmbAES11,
        sourceEmbAES12,
        sourceEmbAESStereo134,
        sourceEmbAES13,
        sourceEmbAES14,
        sourceEmbAESStereo212,
        sourceEmbAES21,
        sourceEmbAES22,
        sourceEmbAESStereo234,
        sourceEmbAES23,
        sourceEmbAES24,
        sourceEmbAESStereo312,
        sourceEmbAES31,
        sourceEmbAES32,
        sourceEmbAESStereo334,
        sourceEmbAES33,
        sourceEmbAES34,
        sourceEmbAESStereo412,
        sourceEmbAES41,
        sourceEmbAES42,
        sourceEmbAESStereo434,
        sourceEmbAES43,
        sourceEmbAES44,
        testToneFrequency,
        dolbyFrameSyncSource,
        deleteGroup1,
        deleteGroup2,
        deleteGroup3,
        deleteGroup4,
        embedBits1,
        embedBits2,
        embedBits3,
        embedBits4,
        cSBTransSDTV,
        embedded11,
        embedded12,
        embedded13,
        embedded14,
        embedded21,
        embedded22,
        embedded23,
        embedded24,
        embedded31,
        embedded32,
        embedded33,
        embedded34,
        embedded41,
        embedded42,
        embedded43,
        embedded44,
        sourceAESOut11,
        sourceAESOut12,
        sourceAESOut21,
        sourceAESOut22,
        sourceAESOut31,
        sourceAESOut32,
        sourceAESOut41,
        sourceAESOut42,
        sourceAESOut51,
        sourceAESOut52,
        sourceAESOut61,
        sourceAESOut62,
        sourceAESOut71,
        sourceAESOut72,
        sourceAESOut81,
        sourceAESOut82,
        vFlag,
        deembPhaseSync,
        deembPhaseSyncVerify,
        audioGain1L,
        audioMute1L,
        audioInvert1L,
        audioMixDown1L,
        audioSilence1L,
        audioOverload1L,
        audioTestTone1L,
        audioGain1R,
        audioMute1R,
        audioInvert1R,
        audioMixDown1R,
        audioSilence1R,
        audioOverload1R,
        audioTestTone1R,
        audioGain2L,
        audioMute2L,
        audioInvert2L,
        audioMixDown2L,
        audioSilence2L,
        audioOverload2L,
        audioTestTone2L,
        audioGain2R,
        audioMute2R,
        audioInvert2R,
        audioMixDown2R,
        audioSilence2R,
        audioOverload2R,
        audioTestTone2R,
        audioGain3L,
        audioMute3L,
        audioInvert3L,
        audioMixDown3L,
        audioSilence3L,
        audioOverload3L,
        audioTestTone3L,
        audioGain3R,
        audioMute3R,
        audioInvert3R,
        audioMixDown3R,
        audioSilence3R,
        audioOverload3R,
        audioTestTone3R,
        audioGain4L,
        audioMute4L,
        audioInvert4L,
        audioMixDown4L,
        audioSilence4L,
        audioOverload4L,
        audioTestTone4L,
        audioGain4R,
        audioMute4R,
        audioInvert4R,
        audioMixDown4R,
        audioSilence4R,
        audioOverload4R,
        audioTestTone4R,
        audioGain5L,
        audioMute5L,
        audioInvert5L,
        audioMixDown5L,
        audioSilence5L,
        audioOverload5L,
        audioTestTone5L,
        audioGain5R,
        audioMute5R,
        audioInvert5R,
        audioMixDown5R,
        audioSilence5R,
        audioOverload5R,
        audioTestTone5R,
        audioGain6L,
        audioMute6L,
        audioInvert6L,
        audioMixDown6L,
        audioSilence6L,
        audioOverload6L,
        audioTestTone6L,
        audioGain6R,
        audioMute6R,
        audioInvert6R,
        audioMixDown6R,
        audioSilence6R,
        audioOverload6R,
        audioTestTone6R,
        audioGain7L,
        audioMute7L,
        audioInvert7L,
        audioMixDown7L,
        audioSilence7L,
        audioOverload7L,
        audioTestTone7L,
        audioGain7R,
        audioMute7R,
        audioInvert7R,
        audioMixDown7R,
        audioSilence7R,
        audioOverload7R,
        audioTestTone7R,
        audioGain8L,
        audioMute8L,
        audioInvert8L,
        audioMixDown8L,
        audioSilence8L,
        audioOverload8L,
        audioTestTone8L,
        audioGain8R,
        audioMute8R,
        audioInvert8R,
        audioMixDown8R,
        audioSilence8R,
        audioOverload8R,
        audioTestTone8R,
        audioGain9L,
        audioMute9L,
        audioInvert9L,
        audioMixDown9L,
        audioSilence9L,
        audioOverload9L,
        audioTestTone9L,
        audioGain9R,
        audioMute9R,
        audioInvert9R,
        audioMixDown9R,
        audioSilence9R,
        audioOverload9R,
        audioTestTone9R,
        audioGain10L,
        audioMute10L,
        audioInvert10L,
        audioMixDown10L,
        audioSilence10L,
        audioOverload10L,
        audioTestTone10L,
        audioGain10R,
        audioMute10R,
        audioInvert10R,
        audioMixDown10R,
        audioSilence10R,
        audioOverload10R,
        audioTestTone10R,
        audioGain11L,
        audioMute11L,
        audioInvert11L,
        audioMixDown11L,
        audioSilence11L,
        audioOverload11L,
        audioTestTone11L,
        audioGain11R,
        audioMute11R,
        audioInvert11R,
        audioMixDown11R,
        audioSilence11R,
        audioOverload11R,
        audioTestTone11R,
        audioGain12L,
        audioMute12L,
        audioInvert12L,
        audioMixDown12L,
        audioSilence12L,
        audioOverload12L,
        audioTestTone12L,
        audioGain12R,
        audioMute12R,
        audioInvert12R,
        audioMixDown12R,
        audioSilence12R,
        audioOverload12R,
        audioTestTone12R,
        audioGain13L,
        audioMute13L,
        audioInvert13L,
        audioMixDown13L,
        audioSilence13L,
        audioOverload13L,
        audioTestTone13L,
        audioGain13R,
        audioMute13R,
        audioInvert13R,
        audioMixDown13R,
        audioSilence13R,
        audioOverload13R,
        audioTestTone13R,
        audioGain14L,
        audioMute14L,
        audioInvert14L,
        audioMixDown14L,
        audioSilence14L,
        audioOverload14L,
        audioTestTone14L,
        audioGain14R,
        audioMute14R,
        audioInvert14R,
        audioMixDown14R,
        audioSilence14R,
        audioOverload14R,
        audioTestTone14R,
        audioGain15L,
        audioMute15L,
        audioInvert15L,
        audioMixDown15L,
        audioSilence15L,
        audioOverload15L,
        audioTestTone15L,
        audioGain15R,
        audioMute15R,
        audioInvert15R,
        audioMixDown15R,
        audioSilence15R,
        audioOverload15R,
        audioTestTone15R,
        audioGain16L,
        audioMute16L,
        audioInvert16L,
        audioMixDown16L,
        audioSilence16L,
        audioOverload16L,
        audioTestTone16L,
        audioGain16R,
        audioMute16R,
        audioInvert16R,
        audioMixDown16R,
        audioSilence16R,
        audioOverload16R,
        audioTestTone16R,
        aESPortAssignment1,
        audioContentAES1,
        audioContentStatusAES1,
        audioContentSDI1,
        audioContentStatusSDI1,
        aESPortAssignment2,
        audioContentAES2,
        audioContentStatusAES2,
        audioContentSDI2,
        audioContentStatusSDI2,
        aESPortAssignment3,
        audioContentAES3,
        audioContentStatusAES3,
        audioContentSDI3,
        audioContentStatusSDI3,
        aESPortAssignment4,
        audioContentAES4,
        audioContentStatusAES4,
        audioContentSDI4,
        audioContentStatusSDI4,
        aESPortAssignment5,
        audioContentAES5,
        audioContentStatusAES5,
        audioContentSDI5,
        audioContentStatusSDI5,
        aESPortAssignment6,
        audioContentAES6,
        audioContentStatusAES6,
        audioContentSDI6,
        audioContentStatusSDI6,
        aESPortAssignment7,
        audioContentAES7,
        audioContentStatusAES7,
        audioContentSDI7,
        audioContentStatusSDI7,
        aESPortAssignment8,
        audioContentAES8,
        audioContentStatusAES8,
        audioContentSDI8,
        audioContentStatusSDI8,
        outStandard,
        inStandard,
        delayVideoUserMode,
        delayVideoFrames,
        delayVideoLines,
        delayVideoPixels,
        delayVideoTotalMs,
        delayAudioSDIIn11,
        delayAudioSDIIn12,
        delayAudioSDIIn21,
        delayAudioSDIIn22,
        delayAudioSDIIn31,
        delayAudioSDIIn32,
        delayAudioSDIIn41,
        delayAudioSDIIn42,
        delayAudioSDIOut11,
        delayAudioSDIOut12,
        delayAudioSDIOut21,
        delayAudioSDIOut22,
        delayAudioSDIOut31,
        delayAudioSDIOut32,
        delayAudioSDIOut41,
        delayAudioSDIOut42,
        delayAudioAESIn1,
        delayAudioAESIn2,
        delayAudioAESIn3,
        delayAudioAESIn4,
        delayAudioAESIn5,
        delayAudioAESIn6,
        delayAudioAESIn7,
        delayAudioAESIn8,
        delayAudioAESOut1,
        delayAudioAESOut2,
        delayAudioAESOut3,
        delayAudioAESOut4,
        delayAudioAESOut5,
        delayAudioAESOut6,
        delayAudioAESOut7,
        delayAudioAESOut8,
        referenceLock,
        referenceStatus,
        referenceSource,
        freqPreselect,
        freq,
        gPIFunc,
        gPI2Func,
        inputToRefTolerance,
        syncMode1,
        inputFreezeSDI1,
        syncSDIIn1,
        out1ApertureEnable,
        out1ApertureLevel,
        out1HBlank,
        out1VBlank,
        out1HFlip,
        out1Gain,
        out1Saturation,
        out1BlackLevel,
        out1Hue,
        out1TestPatternSelect,
        out1TestPatternStd,
        out1TestPatternOn,
        out1IfNoInput,
        audioDelayAESOut,
        audioDelaySDI1,
        audioDelaySDIOut1,
        presetsGPIOn,
        presetsGPIOff,
        presetsGPIOffOn,
        presetsGPIOnOn,
        inputToRefDelay1H,
        inputToRefDelay1V,
        out1ClipHeadroom,
        out1FreezeMode,
        out1TotalProcTime,
        aSCA,
        statusColor,
        statusColorRGB,
        statusText,
        eventPrimaryPowermissing,
        eventRedundantPowermissing,
        eventFanFailure,
        eventReferenceNoInput,
        eventSDIInput1NoInput,
        eventCouldnotlocktoReference,
        eventCouldnotlocktoSDIInput1,
        eventAESInput1NoInput,
        eventAESInput2NoInput,
        eventAESInput3NoInput,
        eventAESInput4NoInput,
        eventAESInput5NoInput,
        eventAESInput6NoInput,
        eventAESInput7NoInput,
        eventAESInput8NoInput,
        eventEmbedderMissingInput,
        eventAESOutputNoInput,
        presetsNumber,
        presetsActive,
        presetsSaveAs,
        presetsCurrentSettingsBasedOn,
        presetsLoadToCurrent,
        presetsName0,
        presetsName1,
        presetsName2,
        presetsName3,
        presetsName4,
        presetsName5,
        presetsName6,
        presetsName7,
        delayAudioSDIOutGang,
        delayAudioAESOutGang,
        eventPrimaryPowermissingSNMP,
        eventRedundantPowermissingSNMP,
        eventFanFailureSNMP,
        eventReferenceNoInputSNMP,
        eventSDIInput1NoInputSNMP,
        eventCouldnotlocktoReferenceSNMP,
        eventCouldnotlocktoSDIInput1SNMP,
        eventAESInput1NoInputSNMP,
        eventAESInput2NoInputSNMP,
        eventAESInput3NoInputSNMP,
        eventAESInput4NoInputSNMP,
        eventAESInput5NoInputSNMP,
        eventAESInput6NoInputSNMP,
        eventAESInput7NoInputSNMP,
        eventAESInput8NoInputSNMP,
        eventEmbedderMissingInputSNMP,
        eventAESOutputNoInputSNMP,
        crossBarAudioOutEmbAES,
        crossBarAudioOutAES,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END