-- Machine generated MIB file, do not edit!
--
-- MIB file for PVD5812-BO-DO-DOW, type code 07.D8, software label 396
-- Generated on Tuesday, 09-Aug-16 11:46:19 UTC
-- CVS $Id: PVD5812-BO-DO-DOW_07d8_sw396.mib,v 1.19 2016/08/09 11:46:21 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs contain
-- unpublished proprietary information written by LYNX Technik AG and
-- are protected by Federal copyright law. They may not be disclosed
-- to third parties or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--
PVD5812-BO-DO-DOW-07d8-sw396-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
mib-modules, products,
FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;
pvd5812-bo-do-dow-07d8-sw396 MODULE-IDENTITY
LAST-UPDATED "201608091146Z"
ORGANIZATION "LYNX Technik AG"
CONTACT-INFO "LYNX Technik AG
Brunnenweg 3
64331 Weiterstadt
http://www.lynx-technik.com
mailto:support@lynx-technik.com"
DESCRIPTION "MIB module definition for PVD5812-BO-DO-DOW, type code 07.D8, software label 396"
REVISION "201608091146Z"
DESCRIPTION "Generated by LYNX Asset Database"
::= { mib-modules 2008396 }
pvd5812-bo-do-dow-07d8 OBJECT-IDENTITY
STATUS current
DESCRIPTION "LYNX device type PVD5812-BO-DO-DOW"
::= { products 2008 }
sw396 OBJECT-IDENTITY
STATUS current
DESCRIPTION "Software label 396"
::= { pvd5812-bo-do-dow-07d8 396 }
-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unknown(0),
black(1),
green(2),
yellow(3),
red(4)
}
TypeFactoryReset ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
press(0)
}
TypeReferenceLock ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
lockToRefIn(0),
lockToSDI1(1),
lockToSDI2(2)
}
TypeReferenceStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
invalid(1),
n525(2),
n625(3),
n720p60(4),
n720p5994(5),
n720p50(6),
n720p30(7),
n720p2997(8),
n720p25(9),
n720p24(10),
n720p2398(11),
n1080i60(12),
n1080i5994(13),
n1080i50(14),
n1080p60(15),
n1080p5994(16),
n1080p50(17),
n1080p30(18),
n1080p2997(19),
n1080p25(20),
n1080p24(21),
n1080p2398(22),
n1080psF30(23),
n1080psF2997(24),
n1080psF25(25),
n1080psF24(26),
n1080psF2398(27)
}
TypeReferenceSource ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
externBoard(0),
internRack(1)
}
TypeFreqPreselect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
evenFrequencies(0),
oddFrequencies(1),
followLastRefInput(2)
}
TypeFreq ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
evenFreq(0),
oddFreq(1),
evenFreqX(2)
}
TypeGPIFunc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
switchVideoInputs(1),
freezeInput1(2),
freezeInput2(3),
freezeBothInputs(4),
switchUserPresets(5)
}
TypeSyncMode1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
frameSync(0),
lineSyncH(1),
lineSyncV(2)
}
TypeInputFreezeSDI1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freezeOnTRSError(0),
transparentForTRSErrors(1),
forceFreeze(2)
}
TypeOut1Assign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
input1(0),
input2(1)
}
TypeOut1Standard ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
invalid(0),
n525(1),
n625(2),
n720p60(3),
n720p5994(4),
n720p50(5),
n720p30(6),
n720p2997(7),
n720p25(8),
n720p24(9),
n720p2398(10),
n1080i60(11),
n1080i5994(12),
n1080i50(13),
n1080p60(14),
n1080p5994(15),
n1080p50(16),
n1080p30(17),
n1080p2997(18),
n1080p25(19),
n1080p24(20),
n1080p2398(21),
n1080psF30(22),
n1080psF2997(23),
n1080psF25(24),
n1080psF24(25),
n1080psF2398(26)
}
TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
black(0),
red(1),
green(2),
blue(3),
cyan(4),
magenta(5),
yellow(6),
white(7),
n15Grey(8),
eQPath(9),
pLLPath(10),
eQPLLPath(11),
n75Colorbar(12),
colorbarOverRed(13)
}
TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n525(0),
n625(1),
n720p60(2),
n720p5994(3),
n720p50(4),
n720p30(5),
n720p2997(6),
n720p25(7),
n720p24(8),
n720p2398(9),
n1080i60(10),
n1080i5994(11),
n1080i50(12),
n1080p30(13),
n1080p2997(14),
n1080p25(15),
n1080p24(16),
n1080p2398(17),
n1080psF24(18),
n1080psF2398(19),
n1080p60(20),
n1080p5994(21),
n1080p50(22),
followLastInput(23)
}
TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freeze(0),
black(1),
testPattern(2)
}
TypeOut1ModifyPsF ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
off(0),
pToPsf(1)
}
TypeInputStatusAES1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
missing(0),
async(1),
ok(2)
}
TypeSourceInternAudio1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
aES1(0),
aES2(1),
aES3(2),
aES4(3),
sDI11(4),
sDI12(5),
sDI13(6),
sDI14(7),
sDI15(8),
sDI16(9),
sDI17(10),
sDI18(11),
sDI21(12),
sDI22(13),
sDI23(14),
sDI24(15),
sDI25(16),
sDI26(17),
sDI27(18),
sDI28(19)
}
TypeSourceInternAudioDirect11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDI11(0),
sDI12(1),
sDI13(2),
sDI14(3),
sDI15(4),
sDI16(5),
sDI17(6),
sDI18(7)
}
TypeSourceInternAudioDirect21 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDI21(0),
sDI22(1),
sDI23(2),
sDI24(3),
sDI25(4),
sDI26(5),
sDI27(6),
sDI28(7)
}
TypeAudioMute1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
norm(0),
mute(1)
}
TypeAudioInvert1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
norm(0),
inv(1)
}
TypeAudioSilence1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
silence(0),
ok(1)
}
TypeAudioOverload1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
ok(0),
overload(1)
}
TypeBits11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
n20Bit(0),
n24Bit(1)
}
TypeSourceAudioOutAES1L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
stream1L(0),
stream1R(1),
stream2L(2),
stream2R(3),
stream3L(4),
stream3R(5),
stream4L(6),
stream4R(7),
stream5L(8),
stream5R(9),
stream6L(10),
stream6R(11),
stream7L(12),
stream7R(13),
stream8L(14),
stream8R(15),
stream9L(16),
stream9R(17),
stream10L(18),
stream10R(19),
stream11L(20),
stream11R(21),
stream12L(22),
stream12R(23),
stream13L(24),
stream13R(25),
stream14L(26),
stream14R(27),
stream15L(28),
stream15R(29),
stream16L(30),
stream16R(31),
stream17L(32),
stream17R(33),
stream18L(34),
stream18R(35),
stream19L(36),
stream19R(37),
stream20L(38),
stream20R(39),
muteTimedByRefL(40),
muteTimedByRefR(41),
stream21L(42),
stream21R(43),
stream22L(44),
stream22R(45),
stream23L(46),
stream23R(47),
stream24L(48),
stream24R(49),
muteTimedBySDI1L(50),
muteTimedBySDI1R(51),
stream25L(52),
stream25R(53),
stream26L(54),
stream26R(55),
stream27L(56),
stream27R(57),
stream28L(58),
stream28R(59),
muteTimedBySDI2L(60),
muteTimedBySDI2R(61)
}
TypeSourceAudioOutMUX11L ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
stream1L(0),
stream1R(1),
stream2L(2),
stream2R(3),
stream3L(4),
stream3R(5),
stream4L(6),
stream4R(7),
stream5L(8),
stream5R(9),
stream6L(10),
stream6R(11),
stream7L(12),
stream7R(13),
stream8L(14),
stream8R(15),
stream9L(16),
stream9R(17),
stream10L(18),
stream10R(19),
stream11L(20),
stream11R(21),
stream12L(22),
stream12R(23),
stream13L(24),
stream13R(25),
stream14L(26),
stream14R(27),
stream15L(28),
stream15R(29),
stream16L(30),
stream16R(31),
stream17L(32),
stream17R(33),
stream18L(34),
stream18R(35),
stream19L(36),
stream19R(37),
stream20L(38),
stream20R(39),
muteTimedByRefL(40),
muteTimedByRefR(41)
}
TypeOut1StatusGroup1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
present(0),
none(1)
}
TypeOut1DeleteGroup1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
keep(0),
del(1)
}
TypeVideoDelayTracking ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
sDIOut1(1),
sDIOut2(2)
}
TypeDelayPulseAssign ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDIOut1(0),
sDIOut2(1)
}
TypeDeembPhaseSyncVerify1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
on(0),
off(1)
}
TypePresetsGPIOn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
current(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeGenLockStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
unlocked(0),
locked(1)
}
TypeAudioContentSDI11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
automatic(0),
pCMAudio(1),
dolbyE(2),
nonPCMData(3)
}
TypeAudioContentStatusSDI11 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
pCMAudio(1),
dolbyE(2),
nonPCMData(3)
}
TypeOut1DelayMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
framesLinesPixels(0),
milliSeconds(1)
}
TypeOut1FreezeMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
freezeField1(0),
freezeField2(1),
freezeFrame(2),
testPattern(3)
}
TypeAudioDolbyETiming1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
sDIOut1(0),
sDIOut2(1),
aESOut(2),
none(3)
}
TypePresetsSaveAs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
nA(0),
preset1(1),
preset2(2),
preset3(3),
preset4(4),
preset5(5),
preset6(6),
preset7(7)
}
TypeEventReferenceNoInputSNMP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Enumeration"
SYNTAX INTEGER {
none(0),
onOnly(1),
offOnly(2),
onOff(3)
}
-- Parameter definitions
typeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LYNX product type name"
::= { paramEntry 1 }
displayName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
::= { paramEntry 2 }
position OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
::= { paramEntry 3 }
uptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Connection time of the device to this UI (in seconds)"
::= { paramEntry 4 }
type OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device type code"
::= { paramEntry 5 }
version OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device version information"
::= { paramEntry 6 }
statusColor OBJECT-TYPE
SYNTAX TypeStatusColor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
::= { paramEntry 7 }
statusColorRGB OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
::= { paramEntry 8 }
statusText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current status text (OK or error-details)"
::= { paramEntry 9 }
factoryReset OBJECT-TYPE
SYNTAX TypeFactoryReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
::= { paramEntry 10 }
lock OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock Device"
::= { paramEntry 11 }
locate OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
::= { paramEntry 12 }
eventReferenceNoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: Reference No Input"
::= { paramEntry 14 }
eventSDIInput1NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: SDI Input 1 No Input"
::= { paramEntry 15 }
eventSDIInput2NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: SDI Input 2 No Input"
::= { paramEntry 16 }
eventFanFailure OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: Fan Failure"
::= { paramEntry 17 }
eventHighTemperature OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error Event: High Temperature"
::= { paramEntry 18 }
eventCouldnotlocktoSDIInput1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: Could not lock to SDI Input 1"
::= { paramEntry 19 }
eventCouldnotlocktoSDIInput2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Event: Could not lock to SDI Input 2"
::= { paramEntry 20 }
eventCouldnotlocktoReference OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: Could not lock to Reference"
::= { paramEntry 21 }
eventAESInput1NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 1 No Input"
::= { paramEntry 22 }
eventAESInput2NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 2 No Input"
::= { paramEntry 23 }
eventAESInput3NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 3 No Input"
::= { paramEntry 24 }
eventAESInput4NoInput OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 4 No Input"
::= { paramEntry 25 }
eventAESInput1asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 1 asynchronous"
::= { paramEntry 26 }
eventAESInput2asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 2 asynchronous"
::= { paramEntry 27 }
eventAESInput3asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 3 asynchronous"
::= { paramEntry 28 }
eventAESInput4asynchronous OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Info Event: AES Input 4 asynchronous"
::= { paramEntry 29 }
channel2CoupleTo1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI-Output Channel 2: couple all selections to channel 1"
::= { paramEntry 33 }
referenceLock OBJECT-TYPE
SYNTAX TypeReferenceLock
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock all outputs to one of *RefIn *SDI1In *SDI2In"
::= { paramEntry 34 }
referenceStatus OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of Reference Input"
::= { paramEntry 35 }
referenceSource OBJECT-TYPE
SYNTAX TypeReferenceSource
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
::= { paramEntry 36 }
freqPreselect OBJECT-TYPE
SYNTAX TypeFreqPreselect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the frequency domain for the complete device (inputs, reference and outputs)"
::= { paramEntry 37 }
freq OBJECT-TYPE
SYNTAX TypeFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
::= { paramEntry 38 }
gPIFunc OBJECT-TYPE
SYNTAX TypeGPIFunc
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify influence of GPI input"
::= { paramEntry 39 }
syncMode1 OBJECT-TYPE
SYNTAX TypeSyncMode1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Synchronization Mode for SDI Channel 1"
::= { paramEntry 40 }
inputStatusSDI1 OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of SDI input channel 1"
::= { paramEntry 41 }
inputFreezeSDI1 OBJECT-TYPE
SYNTAX TypeInputFreezeSDI1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
::= { paramEntry 42 }
syncSDIIn1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed).
This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.
NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path."
::= { paramEntry 43 }
syncMode2 OBJECT-TYPE
SYNTAX TypeSyncMode1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Synchronization Mode for SDI Channel 2"
::= { paramEntry 44 }
inputStatusSDI2 OBJECT-TYPE
SYNTAX TypeReferenceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video Standard of SDI input channel 2"
::= { paramEntry 45 }
inputFreezeSDI2 OBJECT-TYPE
SYNTAX TypeInputFreezeSDI1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
::= { paramEntry 46 }
syncSDIIn2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed).
This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.
NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path."
::= { paramEntry 47 }
out1Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 1 to Input (direct)"
::= { paramEntry 48 }
out1Standard OBJECT-TYPE
SYNTAX TypeOut1Standard
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 1"
::= { paramEntry 49 }
out2Assign OBJECT-TYPE
SYNTAX TypeOut1Assign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign SDI Out 2 to Input (direct)"
::= { paramEntry 50 }
out2Standard OBJECT-TYPE
SYNTAX TypeOut1Standard
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video standard of SDI Out 2"
::= { paramEntry 51 }
out1DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in frames. Combine with Out1/DelayLines and Out1/DelayPixel for total delay"
::= { paramEntry 52 }
out1DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in lines. Combine with Out1/DelayFrames and Out1/DelayPixel for total delay"
::= { paramEntry 53 }
out1DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 delay in pixel. Combine with Out1/DelayFrames and Out1/DelayLines for total delay"
::= { paramEntry 54 }
out1DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1 user delay in milliseconds."
::= { paramEntry 55 }
out1ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable aperture correction"
::= { paramEntry 56 }
out1ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: aperture correction level"
::= { paramEntry 57 }
out1HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable H-Blanking"
::= { paramEntry 58 }
out1VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable V-Blanking"
::= { paramEntry 59 }
out1Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust Video Gain"
::= { paramEntry 60 }
out1Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Saturation"
::= { paramEntry 61 }
out1BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
::= { paramEntry 62 }
out1Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: adjust video Hue"
::= { paramEntry 63 }
out1TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 64 }
out1TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 65 }
out1TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: enable preselected test pattern"
::= { paramEntry 66 }
out1IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 67 }
out1ModifyPsF OBJECT-TYPE
SYNTAX TypeOut1ModifyPsF
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.
This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
::= { paramEntry 68 }
out2DelayFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in frames. Combine with Out2/DelayLines and Out2/DelayPixel for total delay"
::= { paramEntry 69 }
out2DelayLines OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in lines. Combine with Out2/DelayFrames and Out2/DelayPixel for total delay"
::= { paramEntry 70 }
out2DelayPixel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 delay in pixel. Combine with Out2/DelayFrames and Out2/DelayLines for total delay"
::= { paramEntry 71 }
out2DelayMs OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2 user delay in milliseconds."
::= { paramEntry 72 }
out2ApertureEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable aperture correction"
::= { paramEntry 73 }
out2ApertureLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: aperture correction level"
::= { paramEntry 74 }
out2HBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable H-Blanking"
::= { paramEntry 75 }
out2VBlank OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable V-Blanking"
::= { paramEntry 76 }
out2Gain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust Video Gain"
::= { paramEntry 77 }
out2Saturation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Saturation"
::= { paramEntry 78 }
out2BlackLevel OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video black level (in IRE)"
::= { paramEntry 79 }
out2Hue OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: adjust video Hue"
::= { paramEntry 80 }
out2TestPatternSelect OBJECT-TYPE
SYNTAX TypeOut1TestPatternSelect
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
::= { paramEntry 81 }
out2TestPatternStd OBJECT-TYPE
SYNTAX TypeOut1TestPatternStd
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: test pattern standard.
This is only relevant when explicitly switching the test pattern ON (parameter Out2/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
::= { paramEntry 82 }
out2TestPatternOn OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: enable preselected test pattern"
::= { paramEntry 83 }
out2IfNoInput OBJECT-TYPE
SYNTAX TypeOut1IfNoInput
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: specify image content if input is missing.
Setting this switch to test pattern will generate the preselected pattern if input is missing."
::= { paramEntry 84 }
out2ModifyPsF OBJECT-TYPE
SYNTAX TypeOut1ModifyPsF
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.
This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
::= { paramEntry 85 }
inputStatusAES1 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 1"
::= { paramEntry 86 }
inputStatusAES2 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 2"
::= { paramEntry 87 }
inputStatusAES3 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 3"
::= { paramEntry 88 }
inputStatusAES4 OBJECT-TYPE
SYNTAX TypeInputStatusAES1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of AES input channel 4"
::= { paramEntry 89 }
sourceInternAudio1 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 1"
::= { paramEntry 90 }
sourceInternAudio2 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 2"
::= { paramEntry 91 }
sourceInternAudio3 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 3"
::= { paramEntry 92 }
sourceInternAudio4 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 4"
::= { paramEntry 93 }
sourceInternAudio5 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 5"
::= { paramEntry 94 }
sourceInternAudio6 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 6"
::= { paramEntry 95 }
sourceInternAudio7 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 7"
::= { paramEntry 96 }
sourceInternAudio8 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 8"
::= { paramEntry 97 }
sourceInternAudio9 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 9"
::= { paramEntry 98 }
sourceInternAudio10 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 10"
::= { paramEntry 99 }
sourceInternAudio11 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 11"
::= { paramEntry 100 }
sourceInternAudio12 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 12"
::= { paramEntry 101 }
sourceInternAudio13 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 13"
::= { paramEntry 102 }
sourceInternAudio14 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 14"
::= { paramEntry 103 }
sourceInternAudio15 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 15"
::= { paramEntry 104 }
sourceInternAudio16 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 16"
::= { paramEntry 105 }
sourceInternAudio17 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 17"
::= { paramEntry 106 }
sourceInternAudio18 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 18"
::= { paramEntry 107 }
sourceInternAudio19 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 19"
::= { paramEntry 108 }
sourceInternAudio20 OBJECT-TYPE
SYNTAX TypeSourceInternAudio1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 20"
::= { paramEntry 109 }
sourceInternAudioDirect11 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 21"
::= { paramEntry 110 }
sourceInternAudioDirect12 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 22"
::= { paramEntry 111 }
sourceInternAudioDirect13 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 23"
::= { paramEntry 112 }
sourceInternAudioDirect14 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 24"
::= { paramEntry 113 }
sourceInternAudioDirect21 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 25"
::= { paramEntry 114 }
sourceInternAudioDirect22 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 26"
::= { paramEntry 115 }
sourceInternAudioDirect23 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 27"
::= { paramEntry 116 }
sourceInternAudioDirect24 OBJECT-TYPE
SYNTAX TypeSourceInternAudioDirect21
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select Source for internal AES stream no. 28"
::= { paramEntry 117 }
sRC1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 1 ON/OFF"
::= { paramEntry 118 }
sRC2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 2 ON/OFF"
::= { paramEntry 119 }
sRC3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 3 ON/OFF"
::= { paramEntry 120 }
sRC4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 4 ON/OFF"
::= { paramEntry 121 }
sRC5 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 5 ON/OFF"
::= { paramEntry 122 }
sRC6 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 6 ON/OFF"
::= { paramEntry 123 }
sRC7 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 7 ON/OFF"
::= { paramEntry 124 }
sRC8 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "switch sample rate converter (SRC) 8 ON/OFF"
::= { paramEntry 125 }
audioGain1L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 1 L"
::= { paramEntry 126 }
audioMute1L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 1L"
::= { paramEntry 127 }
audioInvert1L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 1L"
::= { paramEntry 128 }
audioSilence1L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 1L"
::= { paramEntry 129 }
audioOverload1L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 1 L"
::= { paramEntry 130 }
audioGain1R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 1 R"
::= { paramEntry 131 }
audioMute1R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 1R"
::= { paramEntry 132 }
audioInvert1R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 1R"
::= { paramEntry 133 }
audioSilence1R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 1R"
::= { paramEntry 134 }
audioOverload1R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 1 R"
::= { paramEntry 135 }
audioMixDown1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 136 }
audioGain2L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 2 L"
::= { paramEntry 137 }
audioMute2L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 2L"
::= { paramEntry 138 }
audioInvert2L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 2L"
::= { paramEntry 139 }
audioSilence2L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 2L"
::= { paramEntry 140 }
audioOverload2L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 2 L"
::= { paramEntry 141 }
audioGain2R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 2 R"
::= { paramEntry 142 }
audioMute2R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 2R"
::= { paramEntry 143 }
audioInvert2R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 2R"
::= { paramEntry 144 }
audioSilence2R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 2R"
::= { paramEntry 145 }
audioOverload2R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 2 R"
::= { paramEntry 146 }
audioMixDown2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 147 }
audioGain3L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 3 L"
::= { paramEntry 148 }
audioMute3L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 3L"
::= { paramEntry 149 }
audioInvert3L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 3L"
::= { paramEntry 150 }
audioSilence3L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 3L"
::= { paramEntry 151 }
audioOverload3L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 3 L"
::= { paramEntry 152 }
audioGain3R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 3 R"
::= { paramEntry 153 }
audioMute3R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 3R"
::= { paramEntry 154 }
audioInvert3R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 3R"
::= { paramEntry 155 }
audioSilence3R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 3R"
::= { paramEntry 156 }
audioOverload3R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 3 R"
::= { paramEntry 157 }
audioMixDown3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 158 }
audioGain4L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 4 L"
::= { paramEntry 159 }
audioMute4L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 4L"
::= { paramEntry 160 }
audioInvert4L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 4L"
::= { paramEntry 161 }
audioSilence4L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 4L"
::= { paramEntry 162 }
audioOverload4L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 4 L"
::= { paramEntry 163 }
audioGain4R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 4 R"
::= { paramEntry 164 }
audioMute4R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 4R"
::= { paramEntry 165 }
audioInvert4R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 4R"
::= { paramEntry 166 }
audioSilence4R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 4R"
::= { paramEntry 167 }
audioOverload4R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 4 R"
::= { paramEntry 168 }
audioMixDown4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 169 }
audioGain5L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 5 L"
::= { paramEntry 170 }
audioMute5L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 5L"
::= { paramEntry 171 }
audioInvert5L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 5L"
::= { paramEntry 172 }
audioSilence5L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 5L"
::= { paramEntry 173 }
audioOverload5L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 5 L"
::= { paramEntry 174 }
audioGain5R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 5 R"
::= { paramEntry 175 }
audioMute5R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 5R"
::= { paramEntry 176 }
audioInvert5R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 5R"
::= { paramEntry 177 }
audioSilence5R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 5R"
::= { paramEntry 178 }
audioOverload5R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 5 R"
::= { paramEntry 179 }
audioMixDown5 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 180 }
audioGain6L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 6 L"
::= { paramEntry 181 }
audioMute6L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 6L"
::= { paramEntry 182 }
audioInvert6L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 6L"
::= { paramEntry 183 }
audioSilence6L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 6L"
::= { paramEntry 184 }
audioOverload6L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 6 L"
::= { paramEntry 185 }
audioGain6R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 6 R"
::= { paramEntry 186 }
audioMute6R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 6R"
::= { paramEntry 187 }
audioInvert6R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 6R"
::= { paramEntry 188 }
audioSilence6R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 6R"
::= { paramEntry 189 }
audioOverload6R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 6 R"
::= { paramEntry 190 }
audioMixDown6 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 191 }
audioGain7L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 7 L"
::= { paramEntry 192 }
audioMute7L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 7L"
::= { paramEntry 193 }
audioInvert7L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 7L"
::= { paramEntry 194 }
audioSilence7L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 7L"
::= { paramEntry 195 }
audioOverload7L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 7 L"
::= { paramEntry 196 }
audioGain7R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 7 R"
::= { paramEntry 197 }
audioMute7R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 7R"
::= { paramEntry 198 }
audioInvert7R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 7R"
::= { paramEntry 199 }
audioSilence7R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 7R"
::= { paramEntry 200 }
audioOverload7R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 7 R"
::= { paramEntry 201 }
audioMixDown7 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 202 }
audioGain8L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 8 L"
::= { paramEntry 203 }
audioMute8L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 8L"
::= { paramEntry 204 }
audioInvert8L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 8L"
::= { paramEntry 205 }
audioSilence8L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 8L"
::= { paramEntry 206 }
audioOverload8L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 8 L"
::= { paramEntry 207 }
audioGain8R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 8 R"
::= { paramEntry 208 }
audioMute8R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 8R"
::= { paramEntry 209 }
audioInvert8R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 8R"
::= { paramEntry 210 }
audioSilence8R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 8R"
::= { paramEntry 211 }
audioOverload8R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 8 R"
::= { paramEntry 212 }
audioMixDown8 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 213 }
audioGain9L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 9 L"
::= { paramEntry 214 }
audioMute9L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 9L"
::= { paramEntry 215 }
audioInvert9L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 9L"
::= { paramEntry 216 }
audioSilence9L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 9L"
::= { paramEntry 217 }
audioOverload9L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 9 L"
::= { paramEntry 218 }
audioGain9R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 9 R"
::= { paramEntry 219 }
audioMute9R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 9R"
::= { paramEntry 220 }
audioInvert9R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 9R"
::= { paramEntry 221 }
audioSilence9R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 9R"
::= { paramEntry 222 }
audioOverload9R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 9 R"
::= { paramEntry 223 }
audioMixDown9 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 224 }
audioGain10L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 10 L"
::= { paramEntry 225 }
audioMute10L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 10L"
::= { paramEntry 226 }
audioInvert10L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 10L"
::= { paramEntry 227 }
audioSilence10L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 10L"
::= { paramEntry 228 }
audioOverload10L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 10 L"
::= { paramEntry 229 }
audioGain10R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 10 R"
::= { paramEntry 230 }
audioMute10R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 10R"
::= { paramEntry 231 }
audioInvert10R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 10R"
::= { paramEntry 232 }
audioSilence10R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 10R"
::= { paramEntry 233 }
audioOverload10R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 10 R"
::= { paramEntry 234 }
audioMixDown10 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 235 }
audioGain11L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 11 L"
::= { paramEntry 236 }
audioMute11L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 11L"
::= { paramEntry 237 }
audioInvert11L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 11L"
::= { paramEntry 238 }
audioSilence11L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 11L"
::= { paramEntry 239 }
audioOverload11L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 11 L"
::= { paramEntry 240 }
audioGain11R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 11 R"
::= { paramEntry 241 }
audioMute11R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 11R"
::= { paramEntry 242 }
audioInvert11R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 11R"
::= { paramEntry 243 }
audioSilence11R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 11R"
::= { paramEntry 244 }
audioOverload11R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 11 R"
::= { paramEntry 245 }
audioMixDown11 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 246 }
audioGain12L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 12 L"
::= { paramEntry 247 }
audioMute12L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 12L"
::= { paramEntry 248 }
audioInvert12L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 12L"
::= { paramEntry 249 }
audioSilence12L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 12L"
::= { paramEntry 250 }
audioOverload12L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 12 L"
::= { paramEntry 251 }
audioGain12R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 12 R"
::= { paramEntry 252 }
audioMute12R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 12R"
::= { paramEntry 253 }
audioInvert12R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 12R"
::= { paramEntry 254 }
audioSilence12R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 12R"
::= { paramEntry 255 }
audioOverload12R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 12 R"
::= { paramEntry 256 }
audioMixDown12 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 257 }
audioGain13L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 13 L"
::= { paramEntry 258 }
audioMute13L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 13L"
::= { paramEntry 259 }
audioInvert13L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 13L"
::= { paramEntry 260 }
audioSilence13L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 13L"
::= { paramEntry 261 }
audioOverload13L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 13 L"
::= { paramEntry 262 }
audioGain13R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 13 R"
::= { paramEntry 263 }
audioMute13R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 13R"
::= { paramEntry 264 }
audioInvert13R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 13R"
::= { paramEntry 265 }
audioSilence13R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 13R"
::= { paramEntry 266 }
audioOverload13R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 13 R"
::= { paramEntry 267 }
audioMixDown13 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 268 }
audioGain14L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 14 L"
::= { paramEntry 269 }
audioMute14L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 14L"
::= { paramEntry 270 }
audioInvert14L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 14L"
::= { paramEntry 271 }
audioSilence14L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 14L"
::= { paramEntry 272 }
audioOverload14L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 14 L"
::= { paramEntry 273 }
audioGain14R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 14 R"
::= { paramEntry 274 }
audioMute14R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 14R"
::= { paramEntry 275 }
audioInvert14R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 14R"
::= { paramEntry 276 }
audioSilence14R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 14R"
::= { paramEntry 277 }
audioOverload14R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 14 R"
::= { paramEntry 278 }
audioMixDown14 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 279 }
audioGain15L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 15 L"
::= { paramEntry 280 }
audioMute15L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 15L"
::= { paramEntry 281 }
audioInvert15L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 15L"
::= { paramEntry 282 }
audioSilence15L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 15L"
::= { paramEntry 283 }
audioOverload15L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 15 L"
::= { paramEntry 284 }
audioGain15R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 15 R"
::= { paramEntry 285 }
audioMute15R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 15R"
::= { paramEntry 286 }
audioInvert15R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 15R"
::= { paramEntry 287 }
audioSilence15R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 15R"
::= { paramEntry 288 }
audioOverload15R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 15 R"
::= { paramEntry 289 }
audioMixDown15 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 290 }
audioGain16L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 16 L"
::= { paramEntry 291 }
audioMute16L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 16L"
::= { paramEntry 292 }
audioInvert16L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 16L"
::= { paramEntry 293 }
audioSilence16L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 16L"
::= { paramEntry 294 }
audioOverload16L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 16 L"
::= { paramEntry 295 }
audioGain16R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 16 R"
::= { paramEntry 296 }
audioMute16R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 16R"
::= { paramEntry 297 }
audioInvert16R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 16R"
::= { paramEntry 298 }
audioSilence16R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 16R"
::= { paramEntry 299 }
audioOverload16R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 16 R"
::= { paramEntry 300 }
audioMixDown16 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 301 }
audioGain17L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 17 L"
::= { paramEntry 302 }
audioMute17L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 17L"
::= { paramEntry 303 }
audioInvert17L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 17L"
::= { paramEntry 304 }
audioSilence17L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 17L"
::= { paramEntry 305 }
audioOverload17L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 17 L"
::= { paramEntry 306 }
audioGain17R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 17 R"
::= { paramEntry 307 }
audioMute17R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 17R"
::= { paramEntry 308 }
audioInvert17R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 17R"
::= { paramEntry 309 }
audioSilence17R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 17R"
::= { paramEntry 310 }
audioOverload17R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 17 R"
::= { paramEntry 311 }
audioMixDown17 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 312 }
audioGain18L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 18 L"
::= { paramEntry 313 }
audioMute18L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 18L"
::= { paramEntry 314 }
audioInvert18L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 18L"
::= { paramEntry 315 }
audioSilence18L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 18L"
::= { paramEntry 316 }
audioOverload18L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 18 L"
::= { paramEntry 317 }
audioGain18R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 18 R"
::= { paramEntry 318 }
audioMute18R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 18R"
::= { paramEntry 319 }
audioInvert18R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 18R"
::= { paramEntry 320 }
audioSilence18R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 18R"
::= { paramEntry 321 }
audioOverload18R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 18 R"
::= { paramEntry 322 }
audioMixDown18 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 323 }
audioGain19L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 19 L"
::= { paramEntry 324 }
audioMute19L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 19L"
::= { paramEntry 325 }
audioInvert19L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 19L"
::= { paramEntry 326 }
audioSilence19L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 19L"
::= { paramEntry 327 }
audioOverload19L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 19 L"
::= { paramEntry 328 }
audioGain19R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 19 R"
::= { paramEntry 329 }
audioMute19R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 19R"
::= { paramEntry 330 }
audioInvert19R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 19R"
::= { paramEntry 331 }
audioSilence19R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 19R"
::= { paramEntry 332 }
audioOverload19R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 19 R"
::= { paramEntry 333 }
audioMixDown19 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 334 }
audioGain20L OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 20 L"
::= { paramEntry 335 }
audioMute20L OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 20L"
::= { paramEntry 336 }
audioInvert20L OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 20L"
::= { paramEntry 337 }
audioSilence20L OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 20L"
::= { paramEntry 338 }
audioOverload20L OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 20 L"
::= { paramEntry 339 }
audioGain20R OBJECT-TYPE
SYNTAX FixedPointValue1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "audio gain for internal AES stream 20 R"
::= { paramEntry 340 }
audioMute20R OBJECT-TYPE
SYNTAX TypeAudioMute1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "mute internal AES stream 20R"
::= { paramEntry 341 }
audioInvert20R OBJECT-TYPE
SYNTAX TypeAudioInvert1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "phase invert internal AES stream 20R"
::= { paramEntry 342 }
audioSilence20R OBJECT-TYPE
SYNTAX TypeAudioSilence1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Silence in internal AES stream 20R"
::= { paramEntry 343 }
audioOverload20R OBJECT-TYPE
SYNTAX TypeAudioOverload1L
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload in internal AES stream 20 R"
::= { paramEntry 344 }
audioMixDown20 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both outputs (L and R) carry a symmetrical mix-down of the stereo-input: (left+right)/2"
::= { paramEntry 345 }
bits11 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 1"
::= { paramEntry 346 }
bits12 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 2"
::= { paramEntry 347 }
bits13 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 3"
::= { paramEntry 348 }
bits14 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 1, Group 4"
::= { paramEntry 349 }
bits21 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 1"
::= { paramEntry 350 }
bits22 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 2"
::= { paramEntry 351 }
bits23 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 3"
::= { paramEntry 352 }
bits24 OBJECT-TYPE
SYNTAX TypeBits11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "AES 20/24 Bit conversion for Embedder 2, Group 4"
::= { paramEntry 353 }
sourceAudioOutAES1L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 1L"
::= { paramEntry 354 }
sourceAudioOutAES1R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 1R"
::= { paramEntry 355 }
sourceAudioOutAES2L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 2L"
::= { paramEntry 356 }
sourceAudioOutAES2R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 2R"
::= { paramEntry 357 }
sourceAudioOutAES3L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 3L"
::= { paramEntry 358 }
sourceAudioOutAES3R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 3R"
::= { paramEntry 359 }
sourceAudioOutAES4L OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 4L"
::= { paramEntry 360 }
sourceAudioOutAES4R OBJECT-TYPE
SYNTAX TypeSourceAudioOutAES1L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for AES output 4R"
::= { paramEntry 361 }
sourceAudioOutMUX11L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 1 (group 1.1), L"
::= { paramEntry 362 }
sourceAudioOutMUX11R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 1 (group 1.1), R"
::= { paramEntry 363 }
sourceAudioOutMUX12L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 2 (group 1.2), L"
::= { paramEntry 364 }
sourceAudioOutMUX12R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 2 (group 1.2), R"
::= { paramEntry 365 }
sourceAudioOutMUX13L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 3 (group 2.1), L"
::= { paramEntry 366 }
sourceAudioOutMUX13R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 3 (group 2.1), R"
::= { paramEntry 367 }
sourceAudioOutMUX14L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 4 (group 2.2), L"
::= { paramEntry 368 }
sourceAudioOutMUX14R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 4 (group 2.2), R"
::= { paramEntry 369 }
sourceAudioOutMUX15L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 5 (group 3.1), L"
::= { paramEntry 370 }
sourceAudioOutMUX15R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 5 (group 3.1), R"
::= { paramEntry 371 }
sourceAudioOutMUX16L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 6 (group 3.2), L"
::= { paramEntry 372 }
sourceAudioOutMUX16R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 6 (group 3.2), R"
::= { paramEntry 373 }
sourceAudioOutMUX17L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 7 (group 4.1), L"
::= { paramEntry 374 }
sourceAudioOutMUX17R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 7 (group 4.1), R"
::= { paramEntry 375 }
sourceAudioOutMUX18L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 8 (group 4.2), L"
::= { paramEntry 376 }
sourceAudioOutMUX18R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 1, AES 8 (group 4.2), R"
::= { paramEntry 377 }
sourceAudioOutMUX21L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 1 (group 1.1), L"
::= { paramEntry 378 }
sourceAudioOutMUX21R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 1 (group 1.1), R"
::= { paramEntry 379 }
sourceAudioOutMUX22L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 2 (group 1.2), L"
::= { paramEntry 380 }
sourceAudioOutMUX22R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 2 (group 1.2), R"
::= { paramEntry 381 }
sourceAudioOutMUX23L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 3 (group 2.1), L"
::= { paramEntry 382 }
sourceAudioOutMUX23R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 3 (group 2.1), R"
::= { paramEntry 383 }
sourceAudioOutMUX24L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 4 (group 2.2), L"
::= { paramEntry 384 }
sourceAudioOutMUX24R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 4 (group 2.2), R"
::= { paramEntry 385 }
sourceAudioOutMUX25L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 5 (group 3.1), L"
::= { paramEntry 386 }
sourceAudioOutMUX25R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 5 (group 3.1), R"
::= { paramEntry 387 }
sourceAudioOutMUX26L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 6 (group 3.2), L"
::= { paramEntry 388 }
sourceAudioOutMUX26R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 6 (group 3.2), R"
::= { paramEntry 389 }
sourceAudioOutMUX27L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 7 (group 4.1), L"
::= { paramEntry 390 }
sourceAudioOutMUX27R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 7 (group 4.1), R"
::= { paramEntry 391 }
sourceAudioOutMUX28L OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 8 (group 4.2), L"
::= { paramEntry 392 }
sourceAudioOutMUX28R OBJECT-TYPE
SYNTAX TypeSourceAudioOutMUX11L
MAX-ACCESS read-write
STATUS current
DESCRIPTION "select (mono) source for MUX 2, AES 8 (group 4.2), R"
::= { paramEntry 393 }
out1EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 1"
::= { paramEntry 394 }
out1EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 1"
::= { paramEntry 395 }
out1EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 1"
::= { paramEntry 396 }
out1EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 1"
::= { paramEntry 397 }
out2EmbedGroup1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 1 into SDI Out 2"
::= { paramEntry 398 }
out2EmbedGroup2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 2 into SDI Out 2"
::= { paramEntry 399 }
out2EmbedGroup3 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 3 into SDI Out 2"
::= { paramEntry 400 }
out2EmbedGroup4 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "embed group 4 into SDI Out 2"
::= { paramEntry 401 }
out1StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 1"
::= { paramEntry 402 }
out1StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 1"
::= { paramEntry 403 }
out1StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 1"
::= { paramEntry 404 }
out1StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 1"
::= { paramEntry 405 }
out2StatusGroup1 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 1 presence in SDI Out 2"
::= { paramEntry 406 }
out2StatusGroup2 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 2 presence in SDI Out 2"
::= { paramEntry 407 }
out2StatusGroup3 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 3 presence in SDI Out 2"
::= { paramEntry 408 }
out2StatusGroup4 OBJECT-TYPE
SYNTAX TypeOut1StatusGroup1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "indication of group 4 presence in SDI Out 2"
::= { paramEntry 409 }
out1DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 410 }
out1DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 411 }
out1DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 412 }
out1DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 1"
::= { paramEntry 413 }
out2DeleteGroup1 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 1 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 414 }
out2DeleteGroup2 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 2 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 415 }
out2DeleteGroup3 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 3 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 416 }
out2DeleteGroup4 OBJECT-TYPE
SYNTAX TypeOut1DeleteGroup1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete group 4 from incoming SDI before embedding to SDI Out 2"
::= { paramEntry 417 }
temperatureMAX1617Int OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PCB temperature (MAX1617) in C"
::= { paramEntry 420 }
temperatureMAX1617Ext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FPGA temperature in C"
::= { paramEntry 421 }
audioDelayAESIn1 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 1"
::= { paramEntry 422 }
audioDelayAESIn2 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 2"
::= { paramEntry 423 }
audioDelayAESIn3 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 3"
::= { paramEntry 424 }
audioDelayAESIn4 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by AES 4"
::= { paramEntry 425 }
audioDelayAESOut1 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 1"
::= { paramEntry 426 }
audioDelayAESOut2 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 2"
::= { paramEntry 427 }
audioDelayAESOut3 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 3"
::= { paramEntry 428 }
audioDelayAESOut4 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for AES-OUT 4"
::= { paramEntry 429 }
audioDelaySDI11 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 11"
::= { paramEntry 430 }
audioDelaySDI12 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 12"
::= { paramEntry 431 }
audioDelaySDI13 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 13"
::= { paramEntry 432 }
audioDelaySDI14 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 14"
::= { paramEntry 433 }
audioDelaySDI15 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 15"
::= { paramEntry 434 }
audioDelaySDI16 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 16"
::= { paramEntry 435 }
audioDelaySDI17 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 17"
::= { paramEntry 436 }
audioDelaySDI18 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 18"
::= { paramEntry 437 }
audioDelaySDI21 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 21"
::= { paramEntry 438 }
audioDelaySDI22 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 22"
::= { paramEntry 439 }
audioDelaySDI23 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 23"
::= { paramEntry 440 }
audioDelaySDI24 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 24"
::= { paramEntry 441 }
audioDelaySDI25 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 25"
::= { paramEntry 442 }
audioDelaySDI26 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 26"
::= { paramEntry 443 }
audioDelaySDI27 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 27"
::= { paramEntry 444 }
audioDelaySDI28 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio embedded into SDI 28"
::= { paramEntry 445 }
audioDelaySDIOut11 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 11"
::= { paramEntry 446 }
audioDelaySDIOut12 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 12"
::= { paramEntry 447 }
audioDelaySDIOut13 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 13"
::= { paramEntry 448 }
audioDelaySDIOut14 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 14"
::= { paramEntry 449 }
audioDelaySDIOut15 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 15"
::= { paramEntry 450 }
audioDelaySDIOut16 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 16"
::= { paramEntry 451 }
audioDelaySDIOut17 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 17"
::= { paramEntry 452 }
audioDelaySDIOut18 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 18"
::= { paramEntry 453 }
audioDelaySDIOut21 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 21"
::= { paramEntry 454 }
audioDelaySDIOut22 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 22"
::= { paramEntry 455 }
audioDelaySDIOut23 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 23"
::= { paramEntry 456 }
audioDelaySDIOut24 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 24"
::= { paramEntry 457 }
audioDelaySDIOut25 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 25"
::= { paramEntry 458 }
audioDelaySDIOut26 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 26"
::= { paramEntry 459 }
audioDelaySDIOut27 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 27"
::= { paramEntry 460 }
audioDelaySDIOut28 OBJECT-TYPE
SYNTAX FixedPointValue2
MAX-ACCESS read-write
STATUS current
DESCRIPTION "additional audio delay [ms] for audio sourced by SDI-Out 28"
::= { paramEntry 461 }
videoDelayTracking OBJECT-TYPE
SYNTAX TypeVideoDelayTracking
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alignment of the audiodelay to the SDI-Out(1-2) Videosignal"
::= { paramEntry 462 }
delayPulseAssign OBJECT-TYPE
SYNTAX TypeDelayPulseAssign
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Assign the Delay Pulse Output to one of the SDI Outputs.
The generated Delay Pulse will represent the exact amount of time that the video signal on this output has been delayed from SDI-Input to SDI-Output."
::= { paramEntry 463 }
deembPhaseSync1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
All running channels are reset if one channel is added/removed.
(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)
If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
::= { paramEntry 464 }
deembPhaseSyncVerify1 OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
::= { paramEntry 465 }
deembPhaseSync2 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
All running channels are reset if one channel is added/removed.
(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)
If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
::= { paramEntry 466 }
deembPhaseSyncVerify2 OBJECT-TYPE
SYNTAX TypeDeembPhaseSyncVerify1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
::= { paramEntry 467 }
presetsGPIOn OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is On.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 468 }
presetsGPIOff OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select user preset that will be activated when GPI is Off.
That applies only if GPI Influence is set to switch User presets."
::= { paramEntry 469 }
genLockStatus OBJECT-TYPE
SYNTAX TypeGenLockStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lock-Status of LMH1982"
::= { paramEntry 470 }
inputToRefDelay1H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Horizontal delay between Input 1 and Reference"
::= { paramEntry 471 }
inputToRefDelay1V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Vertical delay between Input 1 and Reference"
::= { paramEntry 472 }
inputToRefDelay2H OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Horizontal delay between Input 2 and Reference"
::= { paramEntry 473 }
inputToRefDelay2V OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Vertical delay between Input 2 and Reference"
::= { paramEntry 474 }
audioContentSDI11 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.1"
::= { paramEntry 475 }
audioContentSDI12 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.2"
::= { paramEntry 476 }
audioContentSDI13 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.3"
::= { paramEntry 477 }
audioContentSDI14 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.4"
::= { paramEntry 478 }
audioContentSDI15 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.5"
::= { paramEntry 479 }
audioContentSDI16 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.6"
::= { paramEntry 480 }
audioContentSDI17 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.7"
::= { paramEntry 481 }
audioContentSDI18 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 1.8"
::= { paramEntry 482 }
audioContentSDI21 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.1"
::= { paramEntry 483 }
audioContentSDI22 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.2"
::= { paramEntry 484 }
audioContentSDI23 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.3"
::= { paramEntry 485 }
audioContentSDI24 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.4"
::= { paramEntry 486 }
audioContentSDI25 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.5"
::= { paramEntry 487 }
audioContentSDI26 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.6"
::= { paramEntry 488 }
audioContentSDI27 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.7"
::= { paramEntry 489 }
audioContentSDI28 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of SDI-audio group 2.8"
::= { paramEntry 490 }
audioContentStatusSDI11 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.1"
::= { paramEntry 491 }
audioContentStatusSDI12 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.2"
::= { paramEntry 492 }
audioContentStatusSDI13 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.3"
::= { paramEntry 493 }
audioContentStatusSDI14 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.4"
::= { paramEntry 494 }
audioContentStatusSDI15 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.5"
::= { paramEntry 495 }
audioContentStatusSDI16 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.6"
::= { paramEntry 496 }
audioContentStatusSDI17 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.7"
::= { paramEntry 497 }
audioContentStatusSDI18 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 1.8"
::= { paramEntry 498 }
audioContentStatusSDI21 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.1"
::= { paramEntry 499 }
audioContentStatusSDI22 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.2"
::= { paramEntry 500 }
audioContentStatusSDI23 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.3"
::= { paramEntry 501 }
audioContentStatusSDI24 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.4"
::= { paramEntry 502 }
audioContentStatusSDI25 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.5"
::= { paramEntry 503 }
audioContentStatusSDI26 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.6"
::= { paramEntry 504 }
audioContentStatusSDI27 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.7"
::= { paramEntry 505 }
audioContentStatusSDI28 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of SDI-audio group 2.8"
::= { paramEntry 506 }
audioContentAES1 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 1"
::= { paramEntry 507 }
audioContentAES2 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 2"
::= { paramEntry 508 }
audioContentAES3 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 3"
::= { paramEntry 509 }
audioContentAES4 OBJECT-TYPE
SYNTAX TypeAudioContentSDI11
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the audio content type of AES-input 4"
::= { paramEntry 510 }
audioContentStatusAES1 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 1"
::= { paramEntry 511 }
audioContentStatusAES2 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 2"
::= { paramEntry 512 }
audioContentStatusAES3 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 3"
::= { paramEntry 513 }
audioContentStatusAES4 OBJECT-TYPE
SYNTAX TypeAudioContentStatusSDI11
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the audio content type of AES-input 4"
::= { paramEntry 514 }
snapToReferenceFrameLength OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to ON, the minimum total video processing time is set to be equal to the length of one video-frame of the reference standard. E.g. synchronizing a 720p50 SDI to a 625 REF will delay the SDI by minimum 40ms (instead of 20ms).This mode can only be used with synchronous SDI inputs.The default value is OFF."
::= { paramEntry 515 }
out1ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 516 }
out2ClipHeadroom OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: Clips Y code values outside the range of 40h to 3ACh
and Cr, Cb code values outside the range of 40h to 3C0h."
::= { paramEntry 517 }
out1DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 1"
::= { paramEntry 518 }
out2DelayMode OBJECT-TYPE
SYNTAX TypeOut1DelayMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select delay mode of SDI Out 2"
::= { paramEntry 519 }
out1FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 1: specify freeze mode if input is missing."
::= { paramEntry 520 }
out2FreezeMode OBJECT-TYPE
SYNTAX TypeOut1FreezeMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SDI Out 2: specify freeze mode if input is missing."
::= { paramEntry 521 }
audioDolbyETiming1 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 522 }
audioDolbyETiming2 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 523 }
audioDolbyETiming3 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 524 }
audioDolbyETiming4 OBJECT-TYPE
SYNTAX TypeAudioDolbyETiming1
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DolbyE-Guardband position of this DolbyE Stream will be timing-aligned to the output signal that is specified here.
When set to AES Out, the DolbyE-Guardband will be aligned to the Reference input signal. The setting will automatically be modified when this DolbyE stream is not
used in the specified output signal."
::= { paramEntry 525 }
out1TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 1"
::= { paramEntry 526 }
out2TotalProcTime OBJECT-TYPE
SYNTAX FixedPointValue3
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show the total delay comprising the processing time and the user delay
on the used path from SDI Input to SDI Output 2"
::= { paramEntry 527 }
presetsNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "maximum number of user presets"
::= { paramEntry 530 }
presetsActive OBJECT-TYPE
SYNTAX TypePresetsGPIOn
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select the Active Preset.
NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka Current) and make the required modifications there."
::= { paramEntry 531 }
presetsSaveAs OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
::= { paramEntry 532 }
presetsLoadToCurrent OBJECT-TYPE
SYNTAX TypePresetsSaveAs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "loads selected user preset into the current user settings, all actual user changes will be lost"
::= { paramEntry 533 }
presetsName0 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 0"
::= { paramEntry 534 }
presetsName1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 1"
::= { paramEntry 535 }
presetsName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 2"
::= { paramEntry 536 }
presetsName3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 3"
::= { paramEntry 537 }
presetsName4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 4"
::= { paramEntry 538 }
presetsName5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 5"
::= { paramEntry 539 }
presetsName6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 6"
::= { paramEntry 540 }
presetsName7 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "name of user preset 7"
::= { paramEntry 541 }
out1FrameSyncCompensation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Frame Sync Compensation"
::= { paramEntry 542 }
boardID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "BoardID"
::= { paramEntry 548 }
audioDelayAESOutGang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all AES Out Delay values (modify all delay controls synchronously)"
::= { paramEntry 549 }
audioDelaySDIOut1Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 1 Delay values (modify all delay controls synchronously)"
::= { paramEntry 550 }
audioDelaySDIOut2Gang OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Gang-Mode: Couple all SDI Out 2 Delay values (modify all delay controls synchronously)"
::= { paramEntry 551 }
eventReferenceNoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Reference No Input"
::= { paramEntry 552 }
eventSDIInput1NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: SDI Input 1 No Input"
::= { paramEntry 553 }
eventSDIInput2NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: SDI Input 2 No Input"
::= { paramEntry 554 }
eventFanFailureSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Fan Failure"
::= { paramEntry 555 }
eventHighTemperatureSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: High Temperature"
::= { paramEntry 556 }
eventCouldnotlocktoSDIInput1SNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to SDI Input 1"
::= { paramEntry 557 }
eventCouldnotlocktoSDIInput2SNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to SDI Input 2"
::= { paramEntry 558 }
eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: Could not lock to Reference"
::= { paramEntry 559 }
eventAESInput1NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 1 No Input"
::= { paramEntry 560 }
eventAESInput2NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 2 No Input"
::= { paramEntry 561 }
eventAESInput3NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 3 No Input"
::= { paramEntry 562 }
eventAESInput4NoInputSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 4 No Input"
::= { paramEntry 563 }
eventAESInput1asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 1 asynchronous"
::= { paramEntry 564 }
eventAESInput2asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 2 asynchronous"
::= { paramEntry 565 }
eventAESInput3asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 3 asynchronous"
::= { paramEntry 566 }
eventAESInput4asynchronousSNMP OBJECT-TYPE
SYNTAX TypeEventReferenceNoInputSNMP
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Trap for Event: AES Input 4 asynchronous"
::= { paramEntry 567 }
crossBarAudioIntern OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Mono Crossbar for Internal Audio AES Streams"
::= { paramEntry 568 }
crossBarAudioOutMUX1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 1"
::= { paramEntry 569 }
crossBarAudioOutMUX2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for Audio Out Mux 2"
::= { paramEntry 570 }
crossBarAudioOutExtAES OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mutable Stereo Crossbar for External Audio Out AES"
::= { paramEntry 571 }
sNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial Number"
::= { paramEntry 572 }
-- Parameter table
paramTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PVD5812-BO-DO-DOW parameters"
::= { sw396 1 }
paramEntry OBJECT-TYPE
SYNTAX ParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row in the table of PVD5812-BO-DO-DOW parameters"
INDEX { IMPLIED position }
::= { paramTable 1 }
ParamEntry ::= SEQUENCE {
typeName DisplayString,
displayName DisplayString,
position OCTET STRING,
uptime TimeTicks,
type DisplayString,
version DisplayString,
statusColor TypeStatusColor,
statusColorRGB DisplayString,
statusText DisplayString,
factoryReset TypeFactoryReset,
lock OnOffValue,
locate OnOffValue,
eventReferenceNoInput OnOffValue,
eventSDIInput1NoInput OnOffValue,
eventSDIInput2NoInput OnOffValue,
eventFanFailure OnOffValue,
eventHighTemperature OnOffValue,
eventCouldnotlocktoSDIInput1 OnOffValue,
eventCouldnotlocktoSDIInput2 OnOffValue,
eventCouldnotlocktoReference OnOffValue,
eventAESInput1NoInput OnOffValue,
eventAESInput2NoInput OnOffValue,
eventAESInput3NoInput OnOffValue,
eventAESInput4NoInput OnOffValue,
eventAESInput1asynchronous OnOffValue,
eventAESInput2asynchronous OnOffValue,
eventAESInput3asynchronous OnOffValue,
eventAESInput4asynchronous OnOffValue,
channel2CoupleTo1 OnOffValue,
referenceLock TypeReferenceLock,
referenceStatus TypeReferenceStatus,
referenceSource TypeReferenceSource,
freqPreselect TypeFreqPreselect,
freq TypeFreq,
gPIFunc TypeGPIFunc,
syncMode1 TypeSyncMode1,
inputStatusSDI1 TypeReferenceStatus,
inputFreezeSDI1 TypeInputFreezeSDI1,
syncSDIIn1 OnOffValue,
syncMode2 TypeSyncMode1,
inputStatusSDI2 TypeReferenceStatus,
inputFreezeSDI2 TypeInputFreezeSDI1,
syncSDIIn2 OnOffValue,
out1Assign TypeOut1Assign,
out1Standard TypeOut1Standard,
out2Assign TypeOut1Assign,
out2Standard TypeOut1Standard,
out1DelayFrames Integer32,
out1DelayLines Integer32,
out1DelayPixel Integer32,
out1DelayMs FixedPointValue3,
out1ApertureEnable OnOffValue,
out1ApertureLevel Integer32,
out1HBlank OnOffValue,
out1VBlank OnOffValue,
out1Gain Integer32,
out1Saturation Integer32,
out1BlackLevel FixedPointValue1,
out1Hue FixedPointValue1,
out1TestPatternSelect TypeOut1TestPatternSelect,
out1TestPatternStd TypeOut1TestPatternStd,
out1TestPatternOn OnOffValue,
out1IfNoInput TypeOut1IfNoInput,
out1ModifyPsF TypeOut1ModifyPsF,
out2DelayFrames Integer32,
out2DelayLines Integer32,
out2DelayPixel Integer32,
out2DelayMs FixedPointValue3,
out2ApertureEnable OnOffValue,
out2ApertureLevel Integer32,
out2HBlank OnOffValue,
out2VBlank OnOffValue,
out2Gain Integer32,
out2Saturation Integer32,
out2BlackLevel FixedPointValue1,
out2Hue FixedPointValue1,
out2TestPatternSelect TypeOut1TestPatternSelect,
out2TestPatternStd TypeOut1TestPatternStd,
out2TestPatternOn OnOffValue,
out2IfNoInput TypeOut1IfNoInput,
out2ModifyPsF TypeOut1ModifyPsF,
inputStatusAES1 TypeInputStatusAES1,
inputStatusAES2 TypeInputStatusAES1,
inputStatusAES3 TypeInputStatusAES1,
inputStatusAES4 TypeInputStatusAES1,
sourceInternAudio1 TypeSourceInternAudio1,
sourceInternAudio2 TypeSourceInternAudio1,
sourceInternAudio3 TypeSourceInternAudio1,
sourceInternAudio4 TypeSourceInternAudio1,
sourceInternAudio5 TypeSourceInternAudio1,
sourceInternAudio6 TypeSourceInternAudio1,
sourceInternAudio7 TypeSourceInternAudio1,
sourceInternAudio8 TypeSourceInternAudio1,
sourceInternAudio9 TypeSourceInternAudio1,
sourceInternAudio10 TypeSourceInternAudio1,
sourceInternAudio11 TypeSourceInternAudio1,
sourceInternAudio12 TypeSourceInternAudio1,
sourceInternAudio13 TypeSourceInternAudio1,
sourceInternAudio14 TypeSourceInternAudio1,
sourceInternAudio15 TypeSourceInternAudio1,
sourceInternAudio16 TypeSourceInternAudio1,
sourceInternAudio17 TypeSourceInternAudio1,
sourceInternAudio18 TypeSourceInternAudio1,
sourceInternAudio19 TypeSourceInternAudio1,
sourceInternAudio20 TypeSourceInternAudio1,
sourceInternAudioDirect11 TypeSourceInternAudioDirect11,
sourceInternAudioDirect12 TypeSourceInternAudioDirect11,
sourceInternAudioDirect13 TypeSourceInternAudioDirect11,
sourceInternAudioDirect14 TypeSourceInternAudioDirect11,
sourceInternAudioDirect21 TypeSourceInternAudioDirect21,
sourceInternAudioDirect22 TypeSourceInternAudioDirect21,
sourceInternAudioDirect23 TypeSourceInternAudioDirect21,
sourceInternAudioDirect24 TypeSourceInternAudioDirect21,
sRC1 OnOffValue,
sRC2 OnOffValue,
sRC3 OnOffValue,
sRC4 OnOffValue,
sRC5 OnOffValue,
sRC6 OnOffValue,
sRC7 OnOffValue,
sRC8 OnOffValue,
audioGain1L FixedPointValue1,
audioMute1L TypeAudioMute1L,
audioInvert1L TypeAudioInvert1L,
audioSilence1L TypeAudioSilence1L,
audioOverload1L TypeAudioOverload1L,
audioGain1R FixedPointValue1,
audioMute1R TypeAudioMute1L,
audioInvert1R TypeAudioInvert1L,
audioSilence1R TypeAudioSilence1L,
audioOverload1R TypeAudioOverload1L,
audioMixDown1 OnOffValue,
audioGain2L FixedPointValue1,
audioMute2L TypeAudioMute1L,
audioInvert2L TypeAudioInvert1L,
audioSilence2L TypeAudioSilence1L,
audioOverload2L TypeAudioOverload1L,
audioGain2R FixedPointValue1,
audioMute2R TypeAudioMute1L,
audioInvert2R TypeAudioInvert1L,
audioSilence2R TypeAudioSilence1L,
audioOverload2R TypeAudioOverload1L,
audioMixDown2 OnOffValue,
audioGain3L FixedPointValue1,
audioMute3L TypeAudioMute1L,
audioInvert3L TypeAudioInvert1L,
audioSilence3L TypeAudioSilence1L,
audioOverload3L TypeAudioOverload1L,
audioGain3R FixedPointValue1,
audioMute3R TypeAudioMute1L,
audioInvert3R TypeAudioInvert1L,
audioSilence3R TypeAudioSilence1L,
audioOverload3R TypeAudioOverload1L,
audioMixDown3 OnOffValue,
audioGain4L FixedPointValue1,
audioMute4L TypeAudioMute1L,
audioInvert4L TypeAudioInvert1L,
audioSilence4L TypeAudioSilence1L,
audioOverload4L TypeAudioOverload1L,
audioGain4R FixedPointValue1,
audioMute4R TypeAudioMute1L,
audioInvert4R TypeAudioInvert1L,
audioSilence4R TypeAudioSilence1L,
audioOverload4R TypeAudioOverload1L,
audioMixDown4 OnOffValue,
audioGain5L FixedPointValue1,
audioMute5L TypeAudioMute1L,
audioInvert5L TypeAudioInvert1L,
audioSilence5L TypeAudioSilence1L,
audioOverload5L TypeAudioOverload1L,
audioGain5R FixedPointValue1,
audioMute5R TypeAudioMute1L,
audioInvert5R TypeAudioInvert1L,
audioSilence5R TypeAudioSilence1L,
audioOverload5R TypeAudioOverload1L,
audioMixDown5 OnOffValue,
audioGain6L FixedPointValue1,
audioMute6L TypeAudioMute1L,
audioInvert6L TypeAudioInvert1L,
audioSilence6L TypeAudioSilence1L,
audioOverload6L TypeAudioOverload1L,
audioGain6R FixedPointValue1,
audioMute6R TypeAudioMute1L,
audioInvert6R TypeAudioInvert1L,
audioSilence6R TypeAudioSilence1L,
audioOverload6R TypeAudioOverload1L,
audioMixDown6 OnOffValue,
audioGain7L FixedPointValue1,
audioMute7L TypeAudioMute1L,
audioInvert7L TypeAudioInvert1L,
audioSilence7L TypeAudioSilence1L,
audioOverload7L TypeAudioOverload1L,
audioGain7R FixedPointValue1,
audioMute7R TypeAudioMute1L,
audioInvert7R TypeAudioInvert1L,
audioSilence7R TypeAudioSilence1L,
audioOverload7R TypeAudioOverload1L,
audioMixDown7 OnOffValue,
audioGain8L FixedPointValue1,
audioMute8L TypeAudioMute1L,
audioInvert8L TypeAudioInvert1L,
audioSilence8L TypeAudioSilence1L,
audioOverload8L TypeAudioOverload1L,
audioGain8R FixedPointValue1,
audioMute8R TypeAudioMute1L,
audioInvert8R TypeAudioInvert1L,
audioSilence8R TypeAudioSilence1L,
audioOverload8R TypeAudioOverload1L,
audioMixDown8 OnOffValue,
audioGain9L FixedPointValue1,
audioMute9L TypeAudioMute1L,
audioInvert9L TypeAudioInvert1L,
audioSilence9L TypeAudioSilence1L,
audioOverload9L TypeAudioOverload1L,
audioGain9R FixedPointValue1,
audioMute9R TypeAudioMute1L,
audioInvert9R TypeAudioInvert1L,
audioSilence9R TypeAudioSilence1L,
audioOverload9R TypeAudioOverload1L,
audioMixDown9 OnOffValue,
audioGain10L FixedPointValue1,
audioMute10L TypeAudioMute1L,
audioInvert10L TypeAudioInvert1L,
audioSilence10L TypeAudioSilence1L,
audioOverload10L TypeAudioOverload1L,
audioGain10R FixedPointValue1,
audioMute10R TypeAudioMute1L,
audioInvert10R TypeAudioInvert1L,
audioSilence10R TypeAudioSilence1L,
audioOverload10R TypeAudioOverload1L,
audioMixDown10 OnOffValue,
audioGain11L FixedPointValue1,
audioMute11L TypeAudioMute1L,
audioInvert11L TypeAudioInvert1L,
audioSilence11L TypeAudioSilence1L,
audioOverload11L TypeAudioOverload1L,
audioGain11R FixedPointValue1,
audioMute11R TypeAudioMute1L,
audioInvert11R TypeAudioInvert1L,
audioSilence11R TypeAudioSilence1L,
audioOverload11R TypeAudioOverload1L,
audioMixDown11 OnOffValue,
audioGain12L FixedPointValue1,
audioMute12L TypeAudioMute1L,
audioInvert12L TypeAudioInvert1L,
audioSilence12L TypeAudioSilence1L,
audioOverload12L TypeAudioOverload1L,
audioGain12R FixedPointValue1,
audioMute12R TypeAudioMute1L,
audioInvert12R TypeAudioInvert1L,
audioSilence12R TypeAudioSilence1L,
audioOverload12R TypeAudioOverload1L,
audioMixDown12 OnOffValue,
audioGain13L FixedPointValue1,
audioMute13L TypeAudioMute1L,
audioInvert13L TypeAudioInvert1L,
audioSilence13L TypeAudioSilence1L,
audioOverload13L TypeAudioOverload1L,
audioGain13R FixedPointValue1,
audioMute13R TypeAudioMute1L,
audioInvert13R TypeAudioInvert1L,
audioSilence13R TypeAudioSilence1L,
audioOverload13R TypeAudioOverload1L,
audioMixDown13 OnOffValue,
audioGain14L FixedPointValue1,
audioMute14L TypeAudioMute1L,
audioInvert14L TypeAudioInvert1L,
audioSilence14L TypeAudioSilence1L,
audioOverload14L TypeAudioOverload1L,
audioGain14R FixedPointValue1,
audioMute14R TypeAudioMute1L,
audioInvert14R TypeAudioInvert1L,
audioSilence14R TypeAudioSilence1L,
audioOverload14R TypeAudioOverload1L,
audioMixDown14 OnOffValue,
audioGain15L FixedPointValue1,
audioMute15L TypeAudioMute1L,
audioInvert15L TypeAudioInvert1L,
audioSilence15L TypeAudioSilence1L,
audioOverload15L TypeAudioOverload1L,
audioGain15R FixedPointValue1,
audioMute15R TypeAudioMute1L,
audioInvert15R TypeAudioInvert1L,
audioSilence15R TypeAudioSilence1L,
audioOverload15R TypeAudioOverload1L,
audioMixDown15 OnOffValue,
audioGain16L FixedPointValue1,
audioMute16L TypeAudioMute1L,
audioInvert16L TypeAudioInvert1L,
audioSilence16L TypeAudioSilence1L,
audioOverload16L TypeAudioOverload1L,
audioGain16R FixedPointValue1,
audioMute16R TypeAudioMute1L,
audioInvert16R TypeAudioInvert1L,
audioSilence16R TypeAudioSilence1L,
audioOverload16R TypeAudioOverload1L,
audioMixDown16 OnOffValue,
audioGain17L FixedPointValue1,
audioMute17L TypeAudioMute1L,
audioInvert17L TypeAudioInvert1L,
audioSilence17L TypeAudioSilence1L,
audioOverload17L TypeAudioOverload1L,
audioGain17R FixedPointValue1,
audioMute17R TypeAudioMute1L,
audioInvert17R TypeAudioInvert1L,
audioSilence17R TypeAudioSilence1L,
audioOverload17R TypeAudioOverload1L,
audioMixDown17 OnOffValue,
audioGain18L FixedPointValue1,
audioMute18L TypeAudioMute1L,
audioInvert18L TypeAudioInvert1L,
audioSilence18L TypeAudioSilence1L,
audioOverload18L TypeAudioOverload1L,
audioGain18R FixedPointValue1,
audioMute18R TypeAudioMute1L,
audioInvert18R TypeAudioInvert1L,
audioSilence18R TypeAudioSilence1L,
audioOverload18R TypeAudioOverload1L,
audioMixDown18 OnOffValue,
audioGain19L FixedPointValue1,
audioMute19L TypeAudioMute1L,
audioInvert19L TypeAudioInvert1L,
audioSilence19L TypeAudioSilence1L,
audioOverload19L TypeAudioOverload1L,
audioGain19R FixedPointValue1,
audioMute19R TypeAudioMute1L,
audioInvert19R TypeAudioInvert1L,
audioSilence19R TypeAudioSilence1L,
audioOverload19R TypeAudioOverload1L,
audioMixDown19 OnOffValue,
audioGain20L FixedPointValue1,
audioMute20L TypeAudioMute1L,
audioInvert20L TypeAudioInvert1L,
audioSilence20L TypeAudioSilence1L,
audioOverload20L TypeAudioOverload1L,
audioGain20R FixedPointValue1,
audioMute20R TypeAudioMute1L,
audioInvert20R TypeAudioInvert1L,
audioSilence20R TypeAudioSilence1L,
audioOverload20R TypeAudioOverload1L,
audioMixDown20 OnOffValue,
bits11 TypeBits11,
bits12 TypeBits11,
bits13 TypeBits11,
bits14 TypeBits11,
bits21 TypeBits11,
bits22 TypeBits11,
bits23 TypeBits11,
bits24 TypeBits11,
sourceAudioOutAES1L TypeSourceAudioOutAES1L,
sourceAudioOutAES1R TypeSourceAudioOutAES1L,
sourceAudioOutAES2L TypeSourceAudioOutAES1L,
sourceAudioOutAES2R TypeSourceAudioOutAES1L,
sourceAudioOutAES3L TypeSourceAudioOutAES1L,
sourceAudioOutAES3R TypeSourceAudioOutAES1L,
sourceAudioOutAES4L TypeSourceAudioOutAES1L,
sourceAudioOutAES4R TypeSourceAudioOutAES1L,
sourceAudioOutMUX11L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX11R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX12L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX12R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX13L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX13R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX14L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX14R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX15L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX15R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX16L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX16R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX17L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX17R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX18L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX18R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX21L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX21R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX22L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX22R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX23L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX23R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX24L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX24R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX25L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX25R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX26L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX26R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX27L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX27R TypeSourceAudioOutMUX11L,
sourceAudioOutMUX28L TypeSourceAudioOutMUX11L,
sourceAudioOutMUX28R TypeSourceAudioOutMUX11L,
out1EmbedGroup1 OnOffValue,
out1EmbedGroup2 OnOffValue,
out1EmbedGroup3 OnOffValue,
out1EmbedGroup4 OnOffValue,
out2EmbedGroup1 OnOffValue,
out2EmbedGroup2 OnOffValue,
out2EmbedGroup3 OnOffValue,
out2EmbedGroup4 OnOffValue,
out1StatusGroup1 TypeOut1StatusGroup1,
out1StatusGroup2 TypeOut1StatusGroup1,
out1StatusGroup3 TypeOut1StatusGroup1,
out1StatusGroup4 TypeOut1StatusGroup1,
out2StatusGroup1 TypeOut1StatusGroup1,
out2StatusGroup2 TypeOut1StatusGroup1,
out2StatusGroup3 TypeOut1StatusGroup1,
out2StatusGroup4 TypeOut1StatusGroup1,
out1DeleteGroup1 TypeOut1DeleteGroup1,
out1DeleteGroup2 TypeOut1DeleteGroup1,
out1DeleteGroup3 TypeOut1DeleteGroup1,
out1DeleteGroup4 TypeOut1DeleteGroup1,
out2DeleteGroup1 TypeOut1DeleteGroup1,
out2DeleteGroup2 TypeOut1DeleteGroup1,
out2DeleteGroup3 TypeOut1DeleteGroup1,
out2DeleteGroup4 TypeOut1DeleteGroup1,
temperatureMAX1617Int Integer32,
temperatureMAX1617Ext Integer32,
audioDelayAESIn1 FixedPointValue2,
audioDelayAESIn2 FixedPointValue2,
audioDelayAESIn3 FixedPointValue2,
audioDelayAESIn4 FixedPointValue2,
audioDelayAESOut1 FixedPointValue2,
audioDelayAESOut2 FixedPointValue2,
audioDelayAESOut3 FixedPointValue2,
audioDelayAESOut4 FixedPointValue2,
audioDelaySDI11 FixedPointValue2,
audioDelaySDI12 FixedPointValue2,
audioDelaySDI13 FixedPointValue2,
audioDelaySDI14 FixedPointValue2,
audioDelaySDI15 FixedPointValue2,
audioDelaySDI16 FixedPointValue2,
audioDelaySDI17 FixedPointValue2,
audioDelaySDI18 FixedPointValue2,
audioDelaySDI21 FixedPointValue2,
audioDelaySDI22 FixedPointValue2,
audioDelaySDI23 FixedPointValue2,
audioDelaySDI24 FixedPointValue2,
audioDelaySDI25 FixedPointValue2,
audioDelaySDI26 FixedPointValue2,
audioDelaySDI27 FixedPointValue2,
audioDelaySDI28 FixedPointValue2,
audioDelaySDIOut11 FixedPointValue2,
audioDelaySDIOut12 FixedPointValue2,
audioDelaySDIOut13 FixedPointValue2,
audioDelaySDIOut14 FixedPointValue2,
audioDelaySDIOut15 FixedPointValue2,
audioDelaySDIOut16 FixedPointValue2,
audioDelaySDIOut17 FixedPointValue2,
audioDelaySDIOut18 FixedPointValue2,
audioDelaySDIOut21 FixedPointValue2,
audioDelaySDIOut22 FixedPointValue2,
audioDelaySDIOut23 FixedPointValue2,
audioDelaySDIOut24 FixedPointValue2,
audioDelaySDIOut25 FixedPointValue2,
audioDelaySDIOut26 FixedPointValue2,
audioDelaySDIOut27 FixedPointValue2,
audioDelaySDIOut28 FixedPointValue2,
videoDelayTracking TypeVideoDelayTracking,
delayPulseAssign TypeDelayPulseAssign,
deembPhaseSync1 OnOffValue,
deembPhaseSyncVerify1 TypeDeembPhaseSyncVerify1,
deembPhaseSync2 OnOffValue,
deembPhaseSyncVerify2 TypeDeembPhaseSyncVerify1,
presetsGPIOn TypePresetsGPIOn,
presetsGPIOff TypePresetsGPIOn,
genLockStatus TypeGenLockStatus,
inputToRefDelay1H Integer32,
inputToRefDelay1V Integer32,
inputToRefDelay2H Integer32,
inputToRefDelay2V Integer32,
audioContentSDI11 TypeAudioContentSDI11,
audioContentSDI12 TypeAudioContentSDI11,
audioContentSDI13 TypeAudioContentSDI11,
audioContentSDI14 TypeAudioContentSDI11,
audioContentSDI15 TypeAudioContentSDI11,
audioContentSDI16 TypeAudioContentSDI11,
audioContentSDI17 TypeAudioContentSDI11,
audioContentSDI18 TypeAudioContentSDI11,
audioContentSDI21 TypeAudioContentSDI11,
audioContentSDI22 TypeAudioContentSDI11,
audioContentSDI23 TypeAudioContentSDI11,
audioContentSDI24 TypeAudioContentSDI11,
audioContentSDI25 TypeAudioContentSDI11,
audioContentSDI26 TypeAudioContentSDI11,
audioContentSDI27 TypeAudioContentSDI11,
audioContentSDI28 TypeAudioContentSDI11,
audioContentStatusSDI11 TypeAudioContentStatusSDI11,
audioContentStatusSDI12 TypeAudioContentStatusSDI11,
audioContentStatusSDI13 TypeAudioContentStatusSDI11,
audioContentStatusSDI14 TypeAudioContentStatusSDI11,
audioContentStatusSDI15 TypeAudioContentStatusSDI11,
audioContentStatusSDI16 TypeAudioContentStatusSDI11,
audioContentStatusSDI17 TypeAudioContentStatusSDI11,
audioContentStatusSDI18 TypeAudioContentStatusSDI11,
audioContentStatusSDI21 TypeAudioContentStatusSDI11,
audioContentStatusSDI22 TypeAudioContentStatusSDI11,
audioContentStatusSDI23 TypeAudioContentStatusSDI11,
audioContentStatusSDI24 TypeAudioContentStatusSDI11,
audioContentStatusSDI25 TypeAudioContentStatusSDI11,
audioContentStatusSDI26 TypeAudioContentStatusSDI11,
audioContentStatusSDI27 TypeAudioContentStatusSDI11,
audioContentStatusSDI28 TypeAudioContentStatusSDI11,
audioContentAES1 TypeAudioContentSDI11,
audioContentAES2 TypeAudioContentSDI11,
audioContentAES3 TypeAudioContentSDI11,
audioContentAES4 TypeAudioContentSDI11,
audioContentStatusAES1 TypeAudioContentStatusSDI11,
audioContentStatusAES2 TypeAudioContentStatusSDI11,
audioContentStatusAES3 TypeAudioContentStatusSDI11,
audioContentStatusAES4 TypeAudioContentStatusSDI11,
snapToReferenceFrameLength OnOffValue,
out1ClipHeadroom OnOffValue,
out2ClipHeadroom OnOffValue,
out1DelayMode TypeOut1DelayMode,
out2DelayMode TypeOut1DelayMode,
out1FreezeMode TypeOut1FreezeMode,
out2FreezeMode TypeOut1FreezeMode,
audioDolbyETiming1 TypeAudioDolbyETiming1,
audioDolbyETiming2 TypeAudioDolbyETiming1,
audioDolbyETiming3 TypeAudioDolbyETiming1,
audioDolbyETiming4 TypeAudioDolbyETiming1,
out1TotalProcTime FixedPointValue3,
out2TotalProcTime FixedPointValue3,
presetsNumber Integer32,
presetsActive TypePresetsGPIOn,
presetsSaveAs TypePresetsSaveAs,
presetsLoadToCurrent TypePresetsSaveAs,
presetsName0 DisplayString,
presetsName1 DisplayString,
presetsName2 DisplayString,
presetsName3 DisplayString,
presetsName4 DisplayString,
presetsName5 DisplayString,
presetsName6 DisplayString,
presetsName7 DisplayString,
out1FrameSyncCompensation Integer32,
boardID Integer32,
audioDelayAESOutGang OnOffValue,
audioDelaySDIOut1Gang OnOffValue,
audioDelaySDIOut2Gang OnOffValue,
eventReferenceNoInputSNMP TypeEventReferenceNoInputSNMP,
eventSDIInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
eventSDIInput2NoInputSNMP TypeEventReferenceNoInputSNMP,
eventFanFailureSNMP TypeEventReferenceNoInputSNMP,
eventHighTemperatureSNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoSDIInput1SNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoSDIInput2SNMP TypeEventReferenceNoInputSNMP,
eventCouldnotlocktoReferenceSNMP TypeEventReferenceNoInputSNMP,
eventAESInput1NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput2NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput3NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput4NoInputSNMP TypeEventReferenceNoInputSNMP,
eventAESInput1asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput2asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput3asynchronousSNMP TypeEventReferenceNoInputSNMP,
eventAESInput4asynchronousSNMP TypeEventReferenceNoInputSNMP,
crossBarAudioIntern DisplayString,
crossBarAudioOutMUX1 DisplayString,
crossBarAudioOutMUX2 DisplayString,
crossBarAudioOutExtAES DisplayString,
sNumber DisplayString }
-- Conformance statements
conformance OBJECT-IDENTITY
STATUS current
DESCRIPTION "Conformance declaration of PVD5812-BO-DO-DOW"
::= { sw396 2 }
paramGroup OBJECT-GROUP
OBJECTS {
typeName,
displayName,
position,
uptime,
type,
version,
statusColor,
statusColorRGB,
statusText,
factoryReset,
lock,
locate,
eventReferenceNoInput,
eventSDIInput1NoInput,
eventSDIInput2NoInput,
eventFanFailure,
eventHighTemperature,
eventCouldnotlocktoSDIInput1,
eventCouldnotlocktoSDIInput2,
eventCouldnotlocktoReference,
eventAESInput1NoInput,
eventAESInput2NoInput,
eventAESInput3NoInput,
eventAESInput4NoInput,
eventAESInput1asynchronous,
eventAESInput2asynchronous,
eventAESInput3asynchronous,
eventAESInput4asynchronous,
channel2CoupleTo1,
referenceLock,
referenceStatus,
referenceSource,
freqPreselect,
freq,
gPIFunc,
syncMode1,
inputStatusSDI1,
inputFreezeSDI1,
syncSDIIn1,
syncMode2,
inputStatusSDI2,
inputFreezeSDI2,
syncSDIIn2,
out1Assign,
out1Standard,
out2Assign,
out2Standard,
out1DelayFrames,
out1DelayLines,
out1DelayPixel,
out1DelayMs,
out1ApertureEnable,
out1ApertureLevel,
out1HBlank,
out1VBlank,
out1Gain,
out1Saturation,
out1BlackLevel,
out1Hue,
out1TestPatternSelect,
out1TestPatternStd,
out1TestPatternOn,
out1IfNoInput,
out1ModifyPsF,
out2DelayFrames,
out2DelayLines,
out2DelayPixel,
out2DelayMs,
out2ApertureEnable,
out2ApertureLevel,
out2HBlank,
out2VBlank,
out2Gain,
out2Saturation,
out2BlackLevel,
out2Hue,
out2TestPatternSelect,
out2TestPatternStd,
out2TestPatternOn,
out2IfNoInput,
out2ModifyPsF,
inputStatusAES1,
inputStatusAES2,
inputStatusAES3,
inputStatusAES4,
sourceInternAudio1,
sourceInternAudio2,
sourceInternAudio3,
sourceInternAudio4,
sourceInternAudio5,
sourceInternAudio6,
sourceInternAudio7,
sourceInternAudio8,
sourceInternAudio9,
sourceInternAudio10,
sourceInternAudio11,
sourceInternAudio12,
sourceInternAudio13,
sourceInternAudio14,
sourceInternAudio15,
sourceInternAudio16,
sourceInternAudio17,
sourceInternAudio18,
sourceInternAudio19,
sourceInternAudio20,
sourceInternAudioDirect11,
sourceInternAudioDirect12,
sourceInternAudioDirect13,
sourceInternAudioDirect14,
sourceInternAudioDirect21,
sourceInternAudioDirect22,
sourceInternAudioDirect23,
sourceInternAudioDirect24,
sRC1,
sRC2,
sRC3,
sRC4,
sRC5,
sRC6,
sRC7,
sRC8,
audioGain1L,
audioMute1L,
audioInvert1L,
audioSilence1L,
audioOverload1L,
audioGain1R,
audioMute1R,
audioInvert1R,
audioSilence1R,
audioOverload1R,
audioMixDown1,
audioGain2L,
audioMute2L,
audioInvert2L,
audioSilence2L,
audioOverload2L,
audioGain2R,
audioMute2R,
audioInvert2R,
audioSilence2R,
audioOverload2R,
audioMixDown2,
audioGain3L,
audioMute3L,
audioInvert3L,
audioSilence3L,
audioOverload3L,
audioGain3R,
audioMute3R,
audioInvert3R,
audioSilence3R,
audioOverload3R,
audioMixDown3,
audioGain4L,
audioMute4L,
audioInvert4L,
audioSilence4L,
audioOverload4L,
audioGain4R,
audioMute4R,
audioInvert4R,
audioSilence4R,
audioOverload4R,
audioMixDown4,
audioGain5L,
audioMute5L,
audioInvert5L,
audioSilence5L,
audioOverload5L,
audioGain5R,
audioMute5R,
audioInvert5R,
audioSilence5R,
audioOverload5R,
audioMixDown5,
audioGain6L,
audioMute6L,
audioInvert6L,
audioSilence6L,
audioOverload6L,
audioGain6R,
audioMute6R,
audioInvert6R,
audioSilence6R,
audioOverload6R,
audioMixDown6,
audioGain7L,
audioMute7L,
audioInvert7L,
audioSilence7L,
audioOverload7L,
audioGain7R,
audioMute7R,
audioInvert7R,
audioSilence7R,
audioOverload7R,
audioMixDown7,
audioGain8L,
audioMute8L,
audioInvert8L,
audioSilence8L,
audioOverload8L,
audioGain8R,
audioMute8R,
audioInvert8R,
audioSilence8R,
audioOverload8R,
audioMixDown8,
audioGain9L,
audioMute9L,
audioInvert9L,
audioSilence9L,
audioOverload9L,
audioGain9R,
audioMute9R,
audioInvert9R,
audioSilence9R,
audioOverload9R,
audioMixDown9,
audioGain10L,
audioMute10L,
audioInvert10L,
audioSilence10L,
audioOverload10L,
audioGain10R,
audioMute10R,
audioInvert10R,
audioSilence10R,
audioOverload10R,
audioMixDown10,
audioGain11L,
audioMute11L,
audioInvert11L,
audioSilence11L,
audioOverload11L,
audioGain11R,
audioMute11R,
audioInvert11R,
audioSilence11R,
audioOverload11R,
audioMixDown11,
audioGain12L,
audioMute12L,
audioInvert12L,
audioSilence12L,
audioOverload12L,
audioGain12R,
audioMute12R,
audioInvert12R,
audioSilence12R,
audioOverload12R,
audioMixDown12,
audioGain13L,
audioMute13L,
audioInvert13L,
audioSilence13L,
audioOverload13L,
audioGain13R,
audioMute13R,
audioInvert13R,
audioSilence13R,
audioOverload13R,
audioMixDown13,
audioGain14L,
audioMute14L,
audioInvert14L,
audioSilence14L,
audioOverload14L,
audioGain14R,
audioMute14R,
audioInvert14R,
audioSilence14R,
audioOverload14R,
audioMixDown14,
audioGain15L,
audioMute15L,
audioInvert15L,
audioSilence15L,
audioOverload15L,
audioGain15R,
audioMute15R,
audioInvert15R,
audioSilence15R,
audioOverload15R,
audioMixDown15,
audioGain16L,
audioMute16L,
audioInvert16L,
audioSilence16L,
audioOverload16L,
audioGain16R,
audioMute16R,
audioInvert16R,
audioSilence16R,
audioOverload16R,
audioMixDown16,
audioGain17L,
audioMute17L,
audioInvert17L,
audioSilence17L,
audioOverload17L,
audioGain17R,
audioMute17R,
audioInvert17R,
audioSilence17R,
audioOverload17R,
audioMixDown17,
audioGain18L,
audioMute18L,
audioInvert18L,
audioSilence18L,
audioOverload18L,
audioGain18R,
audioMute18R,
audioInvert18R,
audioSilence18R,
audioOverload18R,
audioMixDown18,
audioGain19L,
audioMute19L,
audioInvert19L,
audioSilence19L,
audioOverload19L,
audioGain19R,
audioMute19R,
audioInvert19R,
audioSilence19R,
audioOverload19R,
audioMixDown19,
audioGain20L,
audioMute20L,
audioInvert20L,
audioSilence20L,
audioOverload20L,
audioGain20R,
audioMute20R,
audioInvert20R,
audioSilence20R,
audioOverload20R,
audioMixDown20,
bits11,
bits12,
bits13,
bits14,
bits21,
bits22,
bits23,
bits24,
sourceAudioOutAES1L,
sourceAudioOutAES1R,
sourceAudioOutAES2L,
sourceAudioOutAES2R,
sourceAudioOutAES3L,
sourceAudioOutAES3R,
sourceAudioOutAES4L,
sourceAudioOutAES4R,
sourceAudioOutMUX11L,
sourceAudioOutMUX11R,
sourceAudioOutMUX12L,
sourceAudioOutMUX12R,
sourceAudioOutMUX13L,
sourceAudioOutMUX13R,
sourceAudioOutMUX14L,
sourceAudioOutMUX14R,
sourceAudioOutMUX15L,
sourceAudioOutMUX15R,
sourceAudioOutMUX16L,
sourceAudioOutMUX16R,
sourceAudioOutMUX17L,
sourceAudioOutMUX17R,
sourceAudioOutMUX18L,
sourceAudioOutMUX18R,
sourceAudioOutMUX21L,
sourceAudioOutMUX21R,
sourceAudioOutMUX22L,
sourceAudioOutMUX22R,
sourceAudioOutMUX23L,
sourceAudioOutMUX23R,
sourceAudioOutMUX24L,
sourceAudioOutMUX24R,
sourceAudioOutMUX25L,
sourceAudioOutMUX25R,
sourceAudioOutMUX26L,
sourceAudioOutMUX26R,
sourceAudioOutMUX27L,
sourceAudioOutMUX27R,
sourceAudioOutMUX28L,
sourceAudioOutMUX28R,
out1EmbedGroup1,
out1EmbedGroup2,
out1EmbedGroup3,
out1EmbedGroup4,
out2EmbedGroup1,
out2EmbedGroup2,
out2EmbedGroup3,
out2EmbedGroup4,
out1StatusGroup1,
out1StatusGroup2,
out1StatusGroup3,
out1StatusGroup4,
out2StatusGroup1,
out2StatusGroup2,
out2StatusGroup3,
out2StatusGroup4,
out1DeleteGroup1,
out1DeleteGroup2,
out1DeleteGroup3,
out1DeleteGroup4,
out2DeleteGroup1,
out2DeleteGroup2,
out2DeleteGroup3,
out2DeleteGroup4,
temperatureMAX1617Int,
temperatureMAX1617Ext,
audioDelayAESIn1,
audioDelayAESIn2,
audioDelayAESIn3,
audioDelayAESIn4,
audioDelayAESOut1,
audioDelayAESOut2,
audioDelayAESOut3,
audioDelayAESOut4,
audioDelaySDI11,
audioDelaySDI12,
audioDelaySDI13,
audioDelaySDI14,
audioDelaySDI15,
audioDelaySDI16,
audioDelaySDI17,
audioDelaySDI18,
audioDelaySDI21,
audioDelaySDI22,
audioDelaySDI23,
audioDelaySDI24,
audioDelaySDI25,
audioDelaySDI26,
audioDelaySDI27,
audioDelaySDI28,
audioDelaySDIOut11,
audioDelaySDIOut12,
audioDelaySDIOut13,
audioDelaySDIOut14,
audioDelaySDIOut15,
audioDelaySDIOut16,
audioDelaySDIOut17,
audioDelaySDIOut18,
audioDelaySDIOut21,
audioDelaySDIOut22,
audioDelaySDIOut23,
audioDelaySDIOut24,
audioDelaySDIOut25,
audioDelaySDIOut26,
audioDelaySDIOut27,
audioDelaySDIOut28,
videoDelayTracking,
delayPulseAssign,
deembPhaseSync1,
deembPhaseSyncVerify1,
deembPhaseSync2,
deembPhaseSyncVerify2,
presetsGPIOn,
presetsGPIOff,
genLockStatus,
inputToRefDelay1H,
inputToRefDelay1V,
inputToRefDelay2H,
inputToRefDelay2V,
audioContentSDI11,
audioContentSDI12,
audioContentSDI13,
audioContentSDI14,
audioContentSDI15,
audioContentSDI16,
audioContentSDI17,
audioContentSDI18,
audioContentSDI21,
audioContentSDI22,
audioContentSDI23,
audioContentSDI24,
audioContentSDI25,
audioContentSDI26,
audioContentSDI27,
audioContentSDI28,
audioContentStatusSDI11,
audioContentStatusSDI12,
audioContentStatusSDI13,
audioContentStatusSDI14,
audioContentStatusSDI15,
audioContentStatusSDI16,
audioContentStatusSDI17,
audioContentStatusSDI18,
audioContentStatusSDI21,
audioContentStatusSDI22,
audioContentStatusSDI23,
audioContentStatusSDI24,
audioContentStatusSDI25,
audioContentStatusSDI26,
audioContentStatusSDI27,
audioContentStatusSDI28,
audioContentAES1,
audioContentAES2,
audioContentAES3,
audioContentAES4,
audioContentStatusAES1,
audioContentStatusAES2,
audioContentStatusAES3,
audioContentStatusAES4,
snapToReferenceFrameLength,
out1ClipHeadroom,
out2ClipHeadroom,
out1DelayMode,
out2DelayMode,
out1FreezeMode,
out2FreezeMode,
audioDolbyETiming1,
audioDolbyETiming2,
audioDolbyETiming3,
audioDolbyETiming4,
out1TotalProcTime,
out2TotalProcTime,
presetsNumber,
presetsActive,
presetsSaveAs,
presetsLoadToCurrent,
presetsName0,
presetsName1,
presetsName2,
presetsName3,
presetsName4,
presetsName5,
presetsName6,
presetsName7,
out1FrameSyncCompensation,
boardID,
audioDelayAESOutGang,
audioDelaySDIOut1Gang,
audioDelaySDIOut2Gang,
eventReferenceNoInputSNMP,
eventSDIInput1NoInputSNMP,
eventSDIInput2NoInputSNMP,
eventFanFailureSNMP,
eventHighTemperatureSNMP,
eventCouldnotlocktoSDIInput1SNMP,
eventCouldnotlocktoSDIInput2SNMP,
eventCouldnotlocktoReferenceSNMP,
eventAESInput1NoInputSNMP,
eventAESInput2NoInputSNMP,
eventAESInput3NoInputSNMP,
eventAESInput4NoInputSNMP,
eventAESInput1asynchronousSNMP,
eventAESInput2asynchronousSNMP,
eventAESInput3asynchronousSNMP,
eventAESInput4asynchronousSNMP,
crossBarAudioIntern,
crossBarAudioOutMUX1,
crossBarAudioOutMUX2,
crossBarAudioOutExtAES,
sNumber }
STATUS current
DESCRIPTION "Conformance group containing all device parameters"
::= { conformance 1 }
paramCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance specification"
MODULE -- This module
MANDATORY-GROUPS { paramGroup }
::= { conformance 2 }
END