-- Machine generated MIB file, do not edit!
--
-- MIB file for SVD5082, type code 0E.83, software label 142
-- Generated on Tuesday, 09-Aug-16 14:56:36 UTC
-- CVS $Id: SVD5082_0e83_sw142.mib,v 1.11 2016/08/09 14:56:38 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

SVD5082-0e83-sw142-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

svd5082-0e83-sw142 MODULE-IDENTITY
    LAST-UPDATED "201608091456Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for SVD5082, type code 0E.83, software label 142"
    REVISION "201608091456Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 3715142 }

svd5082-0e83 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type SVD5082"
    ::= { products 3715 }

sw142 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 142"
    ::= { svd5082-0e83 142 }

-- Type definitions
TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeOutput1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input1(0),
        input2(1),
        input3(2),
        input4(3),
        input5(4),
        input6(5),
        input7(6),
        input8(7)
    }

TypeFallbackInput1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        none(1),
        input1(2),
        input2(3),
        input3(4),
        input4(5),
        input5(6),
        input6(7),
        input7(8),
        input8(9)
    }

TypeUsingFallback1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        input1(1),
        input2(2),
        input3(3),
        input4(4),
        input5(5),
        input6(6),
        input7(7),
        input8(8)
    }

TypeInput1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        ok(1)
    }

TypePLL1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        notLocked(0),
        invalid(1),
        invalidX(2),
        invalidXX(3),
        n143MHz(4),
        n177MHz(5),
        n270MHz(6),
        n360MHz(7),
        n540MHz(8)
    }

TypeReference ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        n525(1),
        n625(2),
        n625X(3)
    }

TypeReferenceSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        externBoard(0),
        internRack(1)
    }

TypePanelAddr ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        direct(0),
        busAddr1(1),
        busAddr2(2),
        busAddr3(3),
        busAddr4(4),
        busAddr5(5),
        busAddr6(6),
        busAddr7(7),
        busAddr8(8),
        busAddr9(9),
        busAddr10(10),
        busAddr11(11),
        busAddr12(12),
        busAddr13(13),
        busAddr14(14),
        busAddr15(15)
    }

TypeEventReferenceNoInputSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 7 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 8 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 9 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 10 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 11 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 12 }

eventReferenceNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Reference No Input"
    ::= { paramEntry 14 }

eventNoBackpanel OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: No Backpanel"
    ::= { paramEntry 15 }

eventWrongBackpanel OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Wrong Backpanel"
    ::= { paramEntry 16 }

eventSDIOutput1UsingFallback OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Output 1 Using Fallback"
    ::= { paramEntry 17 }

eventSDIOutput2UsingFallback OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Output 2 Using Fallback"
    ::= { paramEntry 18 }

eventSDIOutput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Output 1 No Input"
    ::= { paramEntry 19 }

eventSDIOutput2NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: SDI Output 2 No Input"
    ::= { paramEntry 20 }

event525videoreference OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Debug Event: 525 video reference (525 video reference)"
    ::= { paramEntry 21 }

output1 OBJECT-TYPE
    SYNTAX TypeOutput1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "assignment of output 1 to one of the inputs"
    ::= { paramEntry 22 }

fallbackInput1 OBJECT-TYPE
    SYNTAX TypeFallbackInput1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "output 1 falls back to this input if regular input is not available"
    ::= { paramEntry 23 }

usingFallback1 OBJECT-TYPE
    SYNTAX TypeUsingFallback1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Output 1 is currently using this fallback input (1...8 or -none-)"
    ::= { paramEntry 24 }

reclock1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "switch reclocking for output 1 ON/OFF"
    ::= { paramEntry 25 }

cycle1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "let output 1 cycle over all inputs (ON/OFF)"
    ::= { paramEntry 26 }

output2 OBJECT-TYPE
    SYNTAX TypeOutput1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "assignment of output 2 to one of the inputs"
    ::= { paramEntry 27 }

fallbackInput2 OBJECT-TYPE
    SYNTAX TypeFallbackInput1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "output 2 falls back to this input if regular input is not available"
    ::= { paramEntry 28 }

usingFallback2 OBJECT-TYPE
    SYNTAX TypeUsingFallback1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Output 2 is currently using this fallback input (1...8 or -none-)"
    ::= { paramEntry 29 }

reclock2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "switch reclocking for output 2 ON/OFF"
    ::= { paramEntry 30 }

cycle2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "let output 2 cycle over all inputs (ON/OFF)"
    ::= { paramEntry 31 }

input1 OBJECT-TYPE
    SYNTAX TypeInput1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "presence indication input 1"
    ::= { paramEntry 32 }

pLL1 OBJECT-TYPE
    SYNTAX TypePLL1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PLL Status 1 (input datarate detection)"
    ::= { paramEntry 33 }

input2 OBJECT-TYPE
    SYNTAX TypeInput1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "presence indication input 2"
    ::= { paramEntry 34 }

pLL2 OBJECT-TYPE
    SYNTAX TypePLL1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PLL Status 2 (input datarate detection)"
    ::= { paramEntry 35 }

input3 OBJECT-TYPE
    SYNTAX TypeInput1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "presence indication input 3"
    ::= { paramEntry 36 }

pLL3 OBJECT-TYPE
    SYNTAX TypePLL1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PLL Status 3 (input datarate detection)"
    ::= { paramEntry 37 }

input4 OBJECT-TYPE
    SYNTAX TypeInput1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "presence indication input 4"
    ::= { paramEntry 38 }

pLL4 OBJECT-TYPE
    SYNTAX TypePLL1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PLL Status 4 (input datarate detection)"
    ::= { paramEntry 39 }

input5 OBJECT-TYPE
    SYNTAX TypeInput1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "presence indication input 5"
    ::= { paramEntry 40 }

pLL5 OBJECT-TYPE
    SYNTAX TypePLL1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PLL Status 5 (input datarate detection)"
    ::= { paramEntry 41 }

input6 OBJECT-TYPE
    SYNTAX TypeInput1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "presence indication input 6"
    ::= { paramEntry 42 }

pLL6 OBJECT-TYPE
    SYNTAX TypePLL1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PLL Status 6 (input datarate detection)"
    ::= { paramEntry 43 }

input7 OBJECT-TYPE
    SYNTAX TypeInput1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "presence indication input 7"
    ::= { paramEntry 44 }

pLL7 OBJECT-TYPE
    SYNTAX TypePLL1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PLL Status 7 (input datarate detection)"
    ::= { paramEntry 45 }

input8 OBJECT-TYPE
    SYNTAX TypeInput1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "presence indication input 8"
    ::= { paramEntry 46 }

pLL8 OBJECT-TYPE
    SYNTAX TypePLL1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "PLL Status 8 (input datarate detection)"
    ::= { paramEntry 47 }

reference OBJECT-TYPE
    SYNTAX TypeReference
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "current reference input standard"
    ::= { paramEntry 48 }

referenceSource OBJECT-TYPE
    SYNTAX TypeReferenceSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
    ::= { paramEntry 49 }

panelAddr OBJECT-TYPE
    SYNTAX TypePanelAddr
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "specify protocol type and address for local panel (e.g. RCP3062)"
    ::= { paramEntry 50 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 51 }

eventReferenceNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Reference No Input"
    ::= { paramEntry 52 }

eventNoBackpanelSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: No Backpanel"
    ::= { paramEntry 53 }

eventWrongBackpanelSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Wrong Backpanel"
    ::= { paramEntry 54 }

eventSDIOutput1UsingFallbackSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Output 1 Using Fallback"
    ::= { paramEntry 55 }

eventSDIOutput2UsingFallbackSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Output 2 Using Fallback"
    ::= { paramEntry 56 }

eventSDIOutput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Output 1 No Input"
    ::= { paramEntry 57 }

eventSDIOutput2NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Output 2 No Input"
    ::= { paramEntry 58 }

event525videoreferenceSNMP OBJECT-TYPE
    SYNTAX TypeEventReferenceNoInputSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: 525 video reference (525 video reference)"
    ::= { paramEntry 59 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 60 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of SVD5082 parameters"
    ::= { sw142 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of SVD5082 parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    eventReferenceNoInput OnOffValue,
    eventNoBackpanel OnOffValue,
    eventWrongBackpanel OnOffValue,
    eventSDIOutput1UsingFallback OnOffValue,
    eventSDIOutput2UsingFallback OnOffValue,
    eventSDIOutput1NoInput OnOffValue,
    eventSDIOutput2NoInput OnOffValue,
    event525videoreference OnOffValue,
    output1 TypeOutput1,
    fallbackInput1 TypeFallbackInput1,
    usingFallback1 TypeUsingFallback1,
    reclock1 OnOffValue,
    cycle1 OnOffValue,
    output2 TypeOutput1,
    fallbackInput2 TypeFallbackInput1,
    usingFallback2 TypeUsingFallback1,
    reclock2 OnOffValue,
    cycle2 OnOffValue,
    input1 TypeInput1,
    pLL1 TypePLL1,
    input2 TypeInput1,
    pLL2 TypePLL1,
    input3 TypeInput1,
    pLL3 TypePLL1,
    input4 TypeInput1,
    pLL4 TypePLL1,
    input5 TypeInput1,
    pLL5 TypePLL1,
    input6 TypeInput1,
    pLL6 TypePLL1,
    input7 TypeInput1,
    pLL7 TypePLL1,
    input8 TypeInput1,
    pLL8 TypePLL1,
    reference TypeReference,
    referenceSource TypeReferenceSource,
    panelAddr TypePanelAddr,
    boardID Integer32,
    eventReferenceNoInputSNMP TypeEventReferenceNoInputSNMP,
    eventNoBackpanelSNMP TypeEventReferenceNoInputSNMP,
    eventWrongBackpanelSNMP TypeEventReferenceNoInputSNMP,
    eventSDIOutput1UsingFallbackSNMP TypeEventReferenceNoInputSNMP,
    eventSDIOutput2UsingFallbackSNMP TypeEventReferenceNoInputSNMP,
    eventSDIOutput1NoInputSNMP TypeEventReferenceNoInputSNMP,
    eventSDIOutput2NoInputSNMP TypeEventReferenceNoInputSNMP,
    event525videoreferenceSNMP TypeEventReferenceNoInputSNMP,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of SVD5082"
    ::= { sw142 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        statusColor,
        statusColorRGB,
        statusText,
        factoryReset,
        lock,
        locate,
        eventReferenceNoInput,
        eventNoBackpanel,
        eventWrongBackpanel,
        eventSDIOutput1UsingFallback,
        eventSDIOutput2UsingFallback,
        eventSDIOutput1NoInput,
        eventSDIOutput2NoInput,
        event525videoreference,
        output1,
        fallbackInput1,
        usingFallback1,
        reclock1,
        cycle1,
        output2,
        fallbackInput2,
        usingFallback2,
        reclock2,
        cycle2,
        input1,
        pLL1,
        input2,
        pLL2,
        input3,
        pLL3,
        input4,
        pLL4,
        input5,
        pLL5,
        input6,
        pLL6,
        input7,
        pLL7,
        input8,
        pLL8,
        reference,
        referenceSource,
        panelAddr,
        boardID,
        eventReferenceNoInputSNMP,
        eventNoBackpanelSNMP,
        eventWrongBackpanelSNMP,
        eventSDIOutput1UsingFallbackSNMP,
        eventSDIOutput2UsingFallbackSNMP,
        eventSDIOutput1NoInputSNMP,
        eventSDIOutput2NoInputSNMP,
        event525videoreferenceSNMP,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END