-- Machine generated MIB file, do not edit!
--
-- MIB file for PDA5280-D, type code 12.DA, software label 623
-- Generated on Tuesday, 09-Aug-16 16:10:59 UTC
-- CVS $Id: PDA5280-D_12da_sw623.mib,v 1.7 2016/08/09 16:11:00 jvo Exp $
--
-- Copyright 2003-2016 by LYNX Technik AG
--
-- These coded instructions, statements, and computer programs  contain
-- unpublished proprietary information  written  by LYNX Technik AG and
-- are protected by Federal copyright law. They  may  not  be disclosed
-- to  third  parties  or copied or duplicated in any form, in whole or
-- in part, without the prior written consent of LYNX Technik AG.
--

PDA5280-D-12da-sw623-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
    Integer32, TimeTicks FROM SNMPv2-SMI -- RFC2578
    TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC -- RFC2579
    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC2580
    mib-modules, products,
    FixedPointValue1, FixedPointValue2, FixedPointValue3, OnOffValue FROM LYNX-SMI;

pda5280-d-12da-sw623 MODULE-IDENTITY
    LAST-UPDATED "201608091610Z"
    ORGANIZATION "LYNX Technik AG"
    CONTACT-INFO "LYNX Technik AG
        Brunnenweg 3
        64331 Weiterstadt
        http://www.lynx-technik.com
        mailto:support@lynx-technik.com"
    DESCRIPTION "MIB module definition for PDA5280-D, type code 12.DA, software label 623"
    REVISION "201608091610Z"
    DESCRIPTION "Generated by LYNX Asset Database"
    ::= { mib-modules 4826623 }

pda5280-d-12da OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "LYNX device type PDA5280-D"
    ::= { products 4826 }

sw623 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Software label 623"
    ::= { pda5280-d-12da 623 }

-- Type definitions
TypeFactoryReset ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        press(0)
    }

TypeStatusColor ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        black(1),
        green(2),
        yellow(3),
        red(4)
    }

TypeBackpanelStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        missing(1),
        present(2)
    }

TypeDolbyBoardType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknown(0),
        none(1),
        cAT561(2),
        cAT1100(3)
    }

TypeDolbyCAT561DecoderSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        deembAES1(0),
        deembAES2(1),
        deembAES3(2),
        deembAES4(3),
        deembAES5(4),
        deembAES6(5),
        deembAES7(6),
        deembAES8(7),
        externAES1(8),
        externAES2(9),
        externAES3(10),
        externAES4(11),
        externAES5(12),
        externAES6(13),
        externAES7(14),
        externAES8(15),
        unassigned(16)
    }

TypeDolbyCAT561EncAudioSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        decoder(0),
        pCMInput(1)
    }

TypeDolbyCAT561EncMetaMetaDataSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        decoder(1),
        static(2)
    }

TypeDolbyCAT561Dec00DolbyEMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        auto(1),
        manual(2)
    }

TypeDolbyCAT561Dec01DolbyEApplyDialNorm ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        disabled(0),
        enabled(1)
    }

TypeDolbyCAT561EncMeta80ProgramID ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n1(0),
        n2(1),
        n3(2),
        n4(3),
        n5(4),
        n6(5),
        n7(6)
    }

TypeDolbyCAT561Enc30Configuration ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n20(0),
        n2020(1),
        n202020(2),
        n20202020(3),
        n51(4),
        n5120(5),
        n20Transcoder(6),
        n2020Transcoder(7),
        n51Transcoder(8),
        transcoder(9),
        n5111(10),
        n5125111Adaptive(11),
        n71ChannelDolbyDigitalPlusNative(12),
        n71ChannelDolbyDigitalPlusUpmixed(13),
        dual51ParallelInputSource(14),
        n51DolbyProLogicIIDownmix(15),
        n51DolbyProLogicIIDownmix2(16)
    }

TypeDolbyCAT561Enc31Mode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        dolbyDigitalPlus(0),
        dolbyDigital(1),
        pCMEncoderBypass(2)
    }

TypeDolbyCAT561Enc35DDPlusDataRate ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n32Kbps(0),
        n40Kbps(1),
        n48Kbps(2),
        n56Kbps(3),
        n64Kbps(4),
        n72Kbps(5),
        n80Kbps(6),
        n88Kbps(7),
        n96Kbps(8),
        n104Kbps(9),
        n112Kbps(10),
        n120Kbps(11),
        n128Kbps(12),
        n144Kbps(13),
        n160Kbps(14),
        n176Kbps(15),
        n192Kbps(16),
        n200Kbps(17),
        n208Kbps(18),
        n216Kbps(19),
        n224Kbps(20),
        n232Kbps(21),
        n240Kbps(22),
        n248Kbps(23),
        n256Kbps(24),
        n272Kbps(25),
        n288Kbps(26),
        n304Kbps(27),
        n320Kbps(28),
        n336Kbps(29),
        n352Kbps(30),
        n368Kbps(31),
        n384Kbps(32),
        n400Kbps(33),
        n448Kbps(34),
        n512Kbps(35),
        n576Kbps(36),
        n640Kbps(37),
        n704Kbps(38),
        n768Kbps(39),
        n832Kbps(40),
        n896Kbps(41),
        n960Kbps(42),
        n1024Kbps(43),
        n1088Kbps(44),
        n1152Kbps(45),
        n1216Kbps(46),
        n1280Kbps(47),
        n1344Kbps(48),
        n1408Kbps(49),
        n1472Kbps(50),
        n1532Kbps(51),
        auto192(52),
        auto200(53),
        auto224(54),
        auto256(55)
    }

TypeDolbyCAT561Enc39DDDataRate ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n56Kbps(0),
        n64Kbps(1),
        n80Kbps(2),
        n96Kbps(3),
        n112Kbps(4),
        n128Kbps(5),
        n160Kbps(6),
        n192Kbps(7),
        n224Kbps(8),
        n256Kbps(9),
        n320Kbps(10),
        n384Kbps(11),
        n448Kbps(12),
        n512Kbps(13),
        n576Kbps(14),
        n640Kbps(15)
    }

TypeDolbyCAT561EncMeta60MetaDataSourceStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        internal(0),
        static(1),
        dolbyEInputStream(2)
    }

TypeDolbyCAT561EncMeta66MetaDataReversionMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lastValid(0),
        internal(1)
    }

TypeDolbyCAT561EncMeta619DialNormOverwriteValue ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n1DB(0),
        n2DB(1),
        n3DB(2),
        n4DB(3),
        n5DB(4),
        n6DB(5),
        n7DB(6),
        n8DB(7),
        n9DB(8),
        n10DB(9),
        n11DB(10),
        n12DB(11),
        n13DB(12),
        n14DB(13),
        n15DB(14),
        n16DB(15),
        n17DB(16),
        n18DB(17),
        n19DB(18),
        n20DB(19),
        n21DB(20),
        n22DB(21),
        n23DB(22),
        n24DB(23),
        n25DB(24),
        n26DB(25),
        n27DB(26),
        n28DB(27),
        n29DB(28),
        n30DB(29),
        n31DB(30)
    }

TypeDolbyCAT561EncMeta627ComprProfileValue ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n0(0),
        n1(1),
        n2(2),
        n3(3),
        n4(4),
        n5(5)
    }

TypeDolbyCAT561EncMeta639SurroundMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        notIndicated(0),
        notDolbySurround(1),
        dolbySurround(2)
    }

TypeDolbyCAT561EncMeta643DownMixmode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        notIndicated(0),
        ltRtDownmix(1),
        loRoDownmix(2),
        dolbyProLogicIICompatible(3)
    }

TypeDolbyCAT561EncMeta82AudioServiceType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        completeMain(0),
        musicAndEffects(1),
        visuallyImpaired(2),
        hearingImpaired(3),
        dialogue(4),
        commentary(5),
        emergency(6)
    }

TypeDolbyCAT561EncMeta83AudioCodingMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n10C(0),
        n20LR(1),
        n30LCR(2),
        n21LRS(3),
        n31LCRS(4),
        n22LRLsRs(5),
        n32LCRLsRs(6)
    }

TypeDolbyCAT561EncMeta84CenterMixLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n3DB(0),
        n45DB(1),
        n6DB(2)
    }

TypeDolbyCAT561EncMeta85SurroundMixLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n3DB(0),
        n6DB(1),
        off(2)
    }

TypeDolbyCAT561EncMeta88DialNorm ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n1DBFS(0),
        n2DBFS(1),
        n3DBFS(2),
        n4DBFS(3),
        n5DBFS(4),
        n6DBFS(5),
        n7DBFS(6),
        n8DBFS(7),
        n9DBFS(8),
        n10DBFS(9),
        n11DBFS(10),
        n12DBFS(11),
        n13DBFS(12),
        n14DBFS(13),
        n15DBFS(14),
        n16DBFS(15),
        n17DBFS(16),
        n18DBFS(17),
        n19DBFS(18),
        n20DBFS(19),
        n21DBFS(20),
        n22DBFS(21),
        n23DBFS(22),
        n24DBFS(23),
        n25DBFS(24),
        n26DBFS(25),
        n27DBFS(26),
        n28DBFS(27),
        n29DBFS(28),
        n30DBFS(29),
        n31DBFS(30)
    }

TypeDolbyCAT561EncMeta810LanguageCode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        unknownNotApplicable0(0),
        albanian1(1),
        breton2(2),
        catalan3(3),
        croatian4(4),
        welsh5(5),
        czech6(6),
        danish7(7),
        german8(8),
        english9(9),
        spanish10(10),
        esperanto12(11),
        estonian13(12),
        basque14(13),
        farcese15(14),
        french16(15),
        frisian17(16),
        irish18(17),
        gaelic20(18),
        galician21(19),
        icelandic22(20),
        italian23(21),
        lappish24(22),
        latin25(23),
        latvian26(24),
        luxembourgian27(25),
        lithuanian28(26),
        hungarian29(27),
        maltese30(28),
        dutch31(29),
        norwegian32(30),
        occitan33(31),
        polish34(32),
        portuguese35(33),
        romanian36(34),
        romansh37(35),
        serbian38(36),
        slovak39(37),
        slovene40(38),
        finnish41(39),
        swedish42(40),
        turkish43(41),
        flemish44(42),
        walloon45(43),
        n46(44),
        n47(45),
        n48(46),
        n49(47),
        natAssignment50(48),
        natAssignment51(49),
        natAssignment52(50),
        natAssignment53(51),
        natAssignment54(52),
        natAssignment55(53),
        natAssignment56(54),
        natAssignment57(55),
        natAssignment58(56),
        natAssignment59(57),
        natAssignment60(58),
        natAssignment61(59),
        natAssignment62(60),
        natAssignment63(61),
        natAssignment64(62),
        natAssignment65(63),
        natAssignment66(64),
        natAssignment67(65),
        natAssignment68(66),
        zulu69(67),
        vietnamese70(68),
        uzbek71(69),
        urdu72(70),
        ukrainian73(71),
        thai74(72),
        telugu75(73),
        tatar76(74),
        tamil77(75),
        tadhiik78(76),
        swahili79(77),
        srananTongo80(78),
        somali81(79),
        sinhalese82(80),
        shona83(81),
        serboCroat84(82),
        ruthenian85(83),
        russian86(84),
        quechua87(85),
        pustu88(86),
        punjabi89(87),
        persian90(88),
        papamierto91(89),
        oriya92(90),
        nepali93(91),
        ndebele94(92),
        marathi95(93),
        moldavian96(94),
        malaysian97(95),
        malagasay98(96),
        macedonian99(97),
        laotian100(98),
        korean101(99),
        khmer102(100),
        kazakh103(101),
        kannada104(102),
        japanese105(103),
        indonesian106(104),
        hindi107(105),
        hebrew108(106),
        hausa109(107),
        gurani110(108),
        gujurati111(109),
        greek112(110),
        georgian113(111),
        fulani114(112),
        dari115(113),
        churash116(114),
        chinese117(115),
        burmese118(116),
        bulgarian119(117),
        bengali120(118),
        belorussian121(119),
        bambora122(120),
        azerbijani123(121),
        assamese124(122),
        armenian125(123),
        arabic126(124),
        amharic127(125)
    }

TypeDolbyCAT561EncMeta818XBSI1LtRtCenterMix ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n3DB(0),
        n15DB(1),
        n0DB(2),
        n15DBX(3),
        n3DBX(4),
        n45DB(5),
        n6DB(6),
        infDB(7)
    }

TypeDolbyCAT561Board215FeatureSet ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        dolbyEDecoding(0),
        dolbyDigitalPlusEncodingDolbyDigitalEncoding(1),
        dolbyEDecodingDolbyDigitalPlusEncodingDolbyDigitalEncoding(2),
        dolbyDigitalPlusEncoding(3),
        dolbyEDecodingDolbyPulseEncoding(4),
        dolbyDigitalPlusEncodingDolbyDigitalEncodingDolbyPulseEncoding(5),
        dolbyEDecodingDolbyDigitalPlusEncodingDolbyDigitalEncodingDolbyPulseEncoding(6)
    }

TypeDolbyCAT561Dec216DolbyEProgConfig ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        noDolbyEPresent(0),
        n512(1),
        n5111(2),
        n44(3),
        n422(4),
        n4211(5),
        n41111(6),
        n2222(7),
        n22211(8),
        n221111(9),
        n2111111(10),
        n11111111(11),
        n51(12),
        n42(13),
        n411(14),
        n222(15),
        n2211(16),
        n21111(17),
        n111111(18),
        n4(19),
        n22(20),
        n211(21),
        n1111(22),
        n71(23),
        n71Screen(24)
    }

TypeDolbyCAT561DecMeta71DolbyEMetaDataStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        notPresent(0),
        invalid(1),
        valid(2)
    }

TypeDolbyCAT561EncMeta72MetaDataReversionStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        reversion(0),
        external(1),
        internal(2)
    }

TypeDelayVideoUserMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        framesLinesPixels(0),
        milliseconds(1)
    }

TypeInStandard ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        missing(0),
        invalid(1),
        n525(2),
        n625(3),
        n720p60(4),
        n720p5994(5),
        n720p50(6),
        n720p30(7),
        n720p2997(8),
        n720p25(9),
        n720p24(10),
        n720p2398(11),
        n1080i60(12),
        n1080i5994(13),
        n1080i50(14),
        n1080p60(15),
        n1080p5994(16),
        n1080p50(17),
        n1080p30(18),
        n1080p2997(19),
        n1080p25(20),
        n1080p24(21),
        n1080p2398(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        n1080psF24(26),
        n1080psF2398(27)
    }

TypeInAes1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        missing(1),
        async(2),
        present(3)
    }

TypeInGrp1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nASDIMissing(0),
        nASDIInvalid(1),
        none(2),
        inserted(3),
        present(4),
        removed(5),
        overwritten(6)
    }

TypeSampleRateConversion1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        bypass(1)
    }

TypeSourceEmbAESStereo112 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aESInt1(0),
        aESInt2(1),
        aESInt3(2),
        aESInt4(3),
        aESInt5(4),
        aESInt6(5),
        aESInt7(6),
        aESInt8(7),
        audExt1(8),
        audExt2(9),
        audExt3(10),
        audExt4(11),
        audExt5(12),
        audExt6(13),
        audExt7(14),
        audExt8(15),
        mute(16),
        dolby(17)
    }

TypeSourceEmbAES11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        aESInt11(0),
        aESInt12(1),
        aESInt13(2),
        aESInt14(3),
        aESInt21(4),
        aESInt22(5),
        aESInt23(6),
        aESInt24(7),
        aESInt31(8),
        aESInt32(9),
        aESInt33(10),
        aESInt34(11),
        aESInt41(12),
        aESInt42(13),
        aESInt43(14),
        aESInt44(15),
        audExt11(16),
        audExt12(17),
        audExt21(18),
        audExt22(19),
        audExt31(20),
        audExt32(21),
        audExt41(22),
        audExt42(23),
        audExt51(24),
        audExt52(25),
        audExt61(26),
        audExt62(27),
        audExt71(28),
        audExt72(29),
        audExt81(30),
        audExt82(31),
        muteL(32),
        muteR(33),
        dolbyEnc1(34),
        dolbyEnc2(35)
    }

TypeTestToneFrequency ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n1000Hz(0),
        n1010Hz(1)
    }

TypeDeleteGroup1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        keep(0),
        del(1)
    }

TypeEmbedBits1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n20Bit(0),
        n24Bit(1)
    }

TypeEmbedded11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        present(0),
        notEmbedded(1)
    }

TypeSourceAESOut11 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        intAES11(0),
        intAES12(1),
        intAES13(2),
        intAES14(3),
        intAES21(4),
        intAES22(5),
        intAES23(6),
        intAES24(7),
        intAES31(8),
        intAES32(9),
        intAES33(10),
        intAES34(11),
        intAES41(12),
        intAES42(13),
        intAES43(14),
        intAES44(15),
        extAES11(16),
        extAES12(17),
        extAES21(18),
        extAES22(19),
        extAES31(20),
        extAES32(21),
        extAES41(22),
        extAES42(23),
        extAES51(24),
        extAES52(25),
        extAES61(26),
        extAES62(27),
        extAES71(28),
        extAES72(29),
        extAES81(30),
        extAES82(31),
        muteL(32),
        muteR(33),
        dolbyEnc0(34),
        dolbyEnc1(35)
    }

TypeDeembPhaseSyncVerify ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        on(0),
        off(1)
    }

TypeAudioContentSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        automatic(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeAudioContentStatusSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        pCMAudio(1),
        dolbyE(2),
        nonPCMData(3)
    }

TypeAESPortAssignment1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        input(0),
        output(1)
    }

TypeAudioMute1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        norm(0),
        mute(1)
    }

TypeAudioInvert1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        norm(0),
        inv(1)
    }

TypeAudioSilence1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        silence(0),
        noSilence(1)
    }

TypeAudioOverload1L ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        ok(0),
        overload(1)
    }

TypeReferenceLock ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        lockToRefIn(0),
        lockToSDI1(1)
    }

TypeReferenceSource ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        externBoard(0),
        internRack(1)
    }

TypeFreqPreselect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        evenFrequencies(0),
        oddFrequencies(1),
        followLastRefInput(2)
    }

TypeFreq ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        evenFreq(0),
        oddFreq(1),
        evenFreqX(2),
        oddFreqX(3),
        evenFreqXX(4)
    }

TypeSyncMode1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        frameSync(0),
        lineSyncH(1),
        lineSyncV(2)
    }

TypeInputFreezeSDI1 ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeOnTRSError(0),
        transparentForTRSErrors(1),
        forceFreeze(2)
    }

TypeSDIIn1FormatPsF ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        auto(0),
        forcePsFFormat(1),
        forceInterlacedFormat(2)
    }

TypeOut1TestPatternSelect ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        black(0),
        red(1),
        green(2),
        blue(3),
        cyan(4),
        magenta(5),
        yellow(6),
        white(7),
        n15Grey(8),
        eQPath(9),
        pLLPath(10),
        eQPLLPath(11),
        n75Colorbar(12),
        colorbarOverRed(13)
    }

TypeOut1TestPatternStd ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n525(0),
        n625(1),
        n720p60(2),
        n720p5994(3),
        n720p50(4),
        n720p30(5),
        n720p2997(6),
        n720p25(7),
        n720p24(8),
        n720p2398(9),
        n1080i60(10),
        n1080i5994(11),
        n1080i50(12),
        n1080p30(13),
        n1080p2997(14),
        n1080p25(15),
        n1080p24(16),
        n1080p2398(17),
        n1080psF24(18),
        n1080psF2398(19),
        n1080p60(20),
        n1080p5994(21),
        n1080p50(22),
        n1080psF30(23),
        n1080psF2997(24),
        n1080psF25(25),
        followLastInput(26)
    }

TypeOut1IfNoInput ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        testPattern(1),
        black(2),
        freeze(3)
    }

TypeOut1ModifyPsF ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        off(0),
        pToPsf(1),
        psfToP(2)
    }

TypeOut1FreezeMode ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        freezeField1(0),
        freezeField2(1),
        freezeFrame(2),
        testPattern(3)
    }

TypeClipHeadroomLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        n100(0),
        n103(1),
        n105(2),
        n107(3)
    }

TypePresetsActive ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        current(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypePresetsSaveAs ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        nA(0),
        preset1(1),
        preset2(2),
        preset3(3),
        preset4(4),
        preset5(5),
        preset6(6),
        preset7(7)
    }

TypeEventPrimaryPowermissingSNMP ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "Enumeration"
    SYNTAX INTEGER {
        none(0),
        onOnly(1),
        offOnly(2),
        onOff(3)
    }

-- Parameter definitions
typeName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "LYNX product type name"
    ::= { paramEntry 1 }

displayName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Name of device (potentially user-defined), as stored in device-controller"
    ::= { paramEntry 2 }

position OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Full-qualified position information (e.g. as used in address-field of remoteIF protocol)"
    ::= { paramEntry 3 }

uptime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Connection time of the device to this UI (in seconds)"
    ::= { paramEntry 4 }

type OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device type code"
    ::= { paramEntry 5 }

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Device version information"
    ::= { paramEntry 6 }

factoryReset OBJECT-TYPE
    SYNTAX TypeFactoryReset
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reset device to factory default values (set value to PRESS for execution)"
    ::= { paramEntry 7 }

lock OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock Device"
    ::= { paramEntry 8 }

locate OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "toggle the locating function (yellow flashing master LED) ON/OFF"
    ::= { paramEntry 9 }

statusColor OBJECT-TYPE
    SYNTAX TypeStatusColor
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED (red/green/yellow)"
    ::= { paramEntry 10 }

statusColorRGB OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current color of the Devices Master LED as #RRGGBB"
    ::= { paramEntry 11 }

statusText OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The current status text (OK or error-details)"
    ::= { paramEntry 12 }

backpanelStatus OBJECT-TYPE
    SYNTAX TypeBackpanelStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication of the device backpanel"
    ::= { paramEntry 13 }

boardID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "BoardID"
    ::= { paramEntry 14 }

eventPrimaryPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Primary Power missing"
    ::= { paramEntry 16 }

eventRedundantPowermissing OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Redundant Power missing"
    ::= { paramEntry 17 }

eventFanFailure OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Fan Failure"
    ::= { paramEntry 18 }

eventReferenceNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Reference No Input"
    ::= { paramEntry 19 }

eventSDIInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: SDI Input 1 No Input"
    ::= { paramEntry 20 }

eventCouldnotlocktoReference OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: Could not lock to Reference"
    ::= { paramEntry 21 }

eventCouldnotlocktoSDIInput1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Warning Event: Could not lock to SDI Input 1"
    ::= { paramEntry 22 }

eventAESInput1NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 1 No Input"
    ::= { paramEntry 23 }

eventAESInput2NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 2 No Input"
    ::= { paramEntry 24 }

eventAESInput3NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 3 No Input"
    ::= { paramEntry 25 }

eventAESInput4NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 4 No Input"
    ::= { paramEntry 26 }

eventAESInput5NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 5 No Input"
    ::= { paramEntry 27 }

eventAESInput6NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 6 No Input"
    ::= { paramEntry 28 }

eventAESInput7NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 7 No Input"
    ::= { paramEntry 29 }

eventAESInput8NoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Info Event: AES Input 8 No Input"
    ::= { paramEntry 30 }

eventEmbedderMissingInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: Embedder Missing Input"
    ::= { paramEntry 31 }

eventAESOutputNoInput OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Error Event: AES Output No Input"
    ::= { paramEntry 32 }

dolbyBoardType OBJECT-TYPE
    SYNTAX TypeDolbyBoardType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Show the type of DolbyBoard that is currently connected (if any)."
    ::= { paramEntry 33 }

dolbyCAT56122HWVersion OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CAT561 Hardware Version.
CAT561 Parameter: hardware_version"
    ::= { paramEntry 34 }

dolbyCAT56121FWVersion OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CAT561 Firmware Version.
CAT561 Parameter: firmware_version"
    ::= { paramEntry 35 }

dolbyCAT56123SerialNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CAT561 Serial Number.
CAT561 Parameter: serial_number"
    ::= { paramEntry 36 }

dolbyCAT561DecoderSource OBJECT-TYPE
    SYNTAX TypeDolbyCAT561DecoderSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the source stream for the Dolby-decoder"
    ::= { paramEntry 37 }

dolbyCAT561PCMSource OBJECT-TYPE
    SYNTAX TypeDolbyCAT561DecoderSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the source stream for the PCM (fallback) input"
    ::= { paramEntry 38 }

dolbyCAT561EncAudioSource OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncAudioSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the audio source for the Encoder"
    ::= { paramEntry 39 }

dolbyCAT561EncAudioSourceAutomatic OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "If this parameter is enabled, the Dolby/CAT561/Enc/AudioSource will automatically be set to <i>Decoder</i> if a decoded stream is available - and fallback to <i>PCM input</i> otherwise.<br>By default (<i>off</i>), Dolby/CAT561/Enc/AudioSource is a manual selection."
    ::= { paramEntry 40 }

dolbyCAT561EncMetaMetaDataSource OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMetaMetaDataSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the metadata source for the Encoder.<br>By default (<i>Automatic</i>), the selection will follow the <i>Encoder Audio Source</i> (and fallback to Internal (static) MetaData in case of <i>PCM Audio</i>)."
    ::= { paramEntry 41 }

dolbyCAT561Dec00DolbyEMode OBJECT-TYPE
    SYNTAX TypeDolbyCAT561Dec00DolbyEMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This parameter controls the Dolby E decoding function when a Dolby E bitstream is received by the CAT561.
CAT561 Parameter: dolby_e_decode_mode"
    ::= { paramEntry 42 }

dolbyCAT561Dec01DolbyEApplyDialNorm OBJECT-TYPE
    SYNTAX TypeDolbyCAT561Dec01DolbyEApplyDialNorm
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This control selects whether the dialnorm valuecontained within the Dolby E stream is appliedduring the Dolby E decoding process.
CAT561 Parameter:  dolby_e_dialnorm_mode"
    ::= { paramEntry 43 }

dolbyCAT561Dec013DolbyEWrapAround OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This parameter controls the Dolby E wraparound decoding function while the CAT561 is operating in two-channel I/O mode.<br>This mode is valid only when decoding a single 5.1-channel Dolby E program and reencoding it.
CAT561 Parameter: dolby_e_wrap_around_enable"
    ::= { paramEntry 44 }

dolbyCAT561EncMeta80ProgramID OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta80ProgramID
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the program ID inside a DolbyE bitstream.
(NOTE: this parameter should not normally need to be modified).
CAT561 Parameter: program_id_enc_1"
    ::= { paramEntry 45 }

dolbyCAT561Enc30Configuration OBJECT-TYPE
    SYNTAX TypeDolbyCAT561Enc30Configuration
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "This parameter controls the operating configuration of the four encoders contained in the CAT561.
CAT561 Parameter: encoder_configuration"
    ::= { paramEntry 46 }

dolbyCAT561Enc31Mode OBJECT-TYPE
    SYNTAX TypeDolbyCAT561Enc31Mode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This control determines whether encoder 1 is creating a Dolby Digital Plus signal or a Dolby Digital signal.
CAT561 Parameter:  encoder_mode_enc_1"
    ::= { paramEntry 47 }

dolbyCAT561Enc35DDPlusDataRate OBJECT-TYPE
    SYNTAX TypeDolbyCAT561Enc35DDPlusDataRate
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Dolby Digital Plus data rate for encoder 1.
CAT561 Parameter: ddplus_datarate_enc_1"
    ::= { paramEntry 48 }

dolbyCAT561Enc39DDDataRate OBJECT-TYPE
    SYNTAX TypeDolbyCAT561Enc39DDDataRate
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Dolby Digital data rate for encoder 1.
CAT561 Parameter: dd_datarate_enc_1"
    ::= { paramEntry 49 }

dolbyCAT561EncMeta60MetaDataSourceStatus OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta60MetaDataSourceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "This selects the source of the metadata used by encoder 1.
CAT561 Parameter: metadata_source_enc_1"
    ::= { paramEntry 50 }

dolbyCAT561EncMeta66MetaDataReversionMode OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta66MetaDataReversionMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This selects the type of metadata that encoder 1 reverts to it if it loses incoming metadata.
CAT561 Parameter: metadata_reversion_mode_enc_1"
    ::= { paramEntry 51 }

dolbyCAT561Meta610MetaOutputReversionMode OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta66MetaDataReversionMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This selects the type of metadata that the metadata output 2 reverts to it if it loses incoming metadata.
CAT561 Parameter: metadata_output_reversion_mode"
    ::= { paramEntry 52 }

dolbyCAT561EncMeta619DialNormOverwriteValue OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta619DialNormOverwriteValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Overwrite the <i>dialnorm</i> parameter in the Dolby Encoder with this value.<br>Applies only if Dolby/CAT561/Enc/Meta/6.15-DialNormOverwriteEnable is enabled
CAT561 Parameter: md_ovr_dialnorm_enc_1"
    ::= { paramEntry 53 }

dolbyCAT561EncMeta615DialNormOverwriteEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This control enables the dialnorm parameter for encoder 1 to be overwritten when encoder 1 is set to use either a Dolby E or external serial metadata source.
CAT561 Parameter: md_ovr_dialnorm_enable_enc_1"
    ::= { paramEntry 54 }

dolbyCAT561EncMeta627ComprProfileValue OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta627ComprProfileValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Overwrite the <i>compression profile</i> in the Dolby Encoder with this value.<br>Applies only if Dolby/CAT561/Enc/Meta/6.23-DRCProfileOverwriteEnable is enabled.<br>CAT561 Parameter: md_ovr_compr1_enc_1"
    ::= { paramEntry 55 }

dolbyCAT561EncMeta631DRProfileValue OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta627ComprProfileValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Overwrite the <i>dynamic range profile</i> in the Dolby Encoder with this value.<br>Applies only if Dolby/CAT561/Enc/Meta/6.23-DRCProfileOverwriteEnable is enabled.<br>CAT561 Parameter: md_ovr_dynrng1_enc_1"
    ::= { paramEntry 56 }

dolbyCAT561EncMeta623DRCProfileOverwriteEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enables the <i>compression</i> and <i>dynamic range</i> parameters to be overwritten by the Dolby-Encoder.<br>Applies only if the current MetaDataSourceValue is set to a dynamic source (e.g. <i>Decoder Out</i>).<br>CAT561 Parameter: md_ovr_comp_prof_enable_enc_1"
    ::= { paramEntry 57 }

dolbyCAT561EncMeta639SurroundMode OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta639SurroundMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Overwrite the <i>surround mode</i> in the Dolby Encoder with this value.<br>Applies only if Dolby/CAT561/Enc/Meta/6.35-DownMixOverwriteEnable is enabled.<br>CAT561 Parameter: md_ovr_dsurmod_enc_1"
    ::= { paramEntry 58 }

dolbyCAT561EncMeta643DownMixmode OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta643DownMixmode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Overwrite the <i>preferred downmix type</i> in the Dolby Encoder with this value.<br>Applies only if Dolby/CAT561/Enc/Meta/6.35-DownMixOverwriteEnable is enabled.<br>CAT561 Parameter: md_ovr_dmixmod_enc_1"
    ::= { paramEntry 59 }

dolbyCAT561EncMeta635DownMixOverwriteEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enables the <i>urround mode</i> and <i>preferred downmix type</i> parameters to be overwritten by the Dolby-Encoder.<br>Applies only if the current MetaDataSourceValue is set to a dynamic source (e.g. <i>Decoder Out</i>).<br>CAT561 Parameter: md_ovr_comp_prof_enable_enc_1"
    ::= { paramEntry 60 }

dolbyCAT561EncMeta82AudioServiceType OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta82AudioServiceType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the type of audio service created by the Encoder.<br>CAT561 Parameter: ac3_bsmod_enc_1"
    ::= { paramEntry 61 }

dolbyCAT561EncMeta83AudioCodingMode OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta83AudioCodingMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This controls the channels contained in the Dolby Digital bitstream created by encoder 1. This is also referred to as the audio coding mode (acmod).<br>CAT561 Parameter: ac3_acmod_enc_1"
    ::= { paramEntry 62 }

dolbyCAT561EncMeta84CenterMixLevel OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta84CenterMixLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the <i>center mix level</i> to be applied by a decoder device (downstream) when performing a downmix .<br>CAT561 Parameter: ac3_cmixlev_enc_1"
    ::= { paramEntry 63 }

dolbyCAT561EncMeta85SurroundMixLevel OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta85SurroundMixLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the <i>surround attenuation</i> to be applied by a decoder device (downstream) when performing a downmix.<br>CAT561 Parameter: ac3_surmixlev_enc_1"
    ::= { paramEntry 64 }

dolbyCAT561EncMeta86SurroundMode OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta639SurroundMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mark generated bitstream as <i>surround encoded</i>. Applicable only if Dolby/CAT561/Enc/Meta/8.3-AudioCodingMode is <i>2/0</i>.<br>CAT561 Parameter: ac3_dsurmod_enc_1"
    ::= { paramEntry 65 }

dolbyCAT561EncMeta87LFEencoded OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "For the generated Dolby bitstream: specify if LFE is coded.<br>CAT561 Parameter: ac3_lfeon_enc_1"
    ::= { paramEntry 66 }

dolbyCAT561EncMeta88DialNorm OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta88DialNorm
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "For the generated Dolby bitstream: specify the average dialogue level of the program relative to 0 dBFS (digital 100%).<br>CAT561 Parameter: ac3_dialnorm_enc_1"
    ::= { paramEntry 67 }

dolbyCAT561EncMeta814Copyright OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify if the generated bitstream is protected by a copyright.<br>CAT561 Parameter: ac3_copyrightb_enc_1"
    ::= { paramEntry 68 }

dolbyCAT561EncMeta810LanguageCode OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta810LanguageCode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "For the generated Dolby bitstream: specify the language code for the audio service.<br>CAT561 Parameter: ac3_langcod_enc_1"
    ::= { paramEntry 69 }

dolbyCAT561EncMeta89LanguageCodeExists OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "For the generated Dolby bitstream: specify if a language code exists.<br>CAT561 Parameter: ac3_langcode_enc_1"
    ::= { paramEntry 70 }

dolbyCAT561EncMeta817XBSI1DownMixmode OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta643DownMixmode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Preferred DownMix-Mode to be performed by a decoder (downstream).<br>NOTE: only applicable if Dolby/CAT561/Enc/Meta/8.16-XBSI1_Exists is enabled.<br>CAT561 Parameter: ac3_xbsi_dmixmod_enc_1"
    ::= { paramEntry 71 }

dolbyCAT561EncMeta816XBSI1Exists OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "When set to 0 then all other XBSI1 parameters are not applicable.<br>CAT561 Parameter: ac3_xbsi1e_enc_1"
    ::= { paramEntry 72 }

dolbyCAT561EncMeta818XBSI1LtRtCenterMix OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta818XBSI1LtRtCenterMix
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Level of Center Channel when an Lt/Rt downmix is performed by a decoder (downstream)<br>NOTE: only applicable if Dolby/CAT561/Enc/Meta/8.16-XBSI1_Exists is enabled.<br>CAT561 Parameter: ac3_xbsi_ltrtcmixlev_enc_1"
    ::= { paramEntry 73 }

dolbyCAT561EncMeta819XBSI1LtRtSurroundMix OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta818XBSI1LtRtCenterMix
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Level of Surround Channels when an Lt/Rt downmix is performed by a decoder (downstream)<br>NOTE: only applicable if Dolby/CAT561/Enc/Meta/8.16-XBSI1_Exists is enabled.<br>CAT561 Parameter: ac3_xbsi_ltrtsmixlev_enc_1"
    ::= { paramEntry 74 }

dolbyCAT561EncMeta820XBSI1LoRoCenterMix OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta818XBSI1LtRtCenterMix
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Level of Center Channel when an Lo/Ro downmix is performed by a decoder (downstream)<br>NOTE: only applicable if Dolby/CAT561/Enc/Meta/8.16-XBSI1_Exists is enabled.<br>CAT561 Parameter: ac3_xbsi_lorocmixlev_enc_1"
    ::= { paramEntry 75 }

dolbyCAT561EncMeta821XBSI1LoRoSurroundMix OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta818XBSI1LtRtCenterMix
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Level of Surround Channels when an Lo/Ro downmix is performed by a decoder (downstream)<br>NOTE: only applicable if Dolby/CAT561/Enc/Meta/8.16-XBSI1_Exists is enabled.<br>CAT561 Parameter: ac3_xbsi_lorosmixlev_enc_1"
    ::= { paramEntry 76 }

dolbyCAT561Board215FeatureSet OBJECT-TYPE
    SYNTAX TypeDolbyCAT561Board215FeatureSet
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Show available feature set in CAT561 module.
CAT561 Parameter: feature_set"
    ::= { paramEntry 77 }

dolbyCAT561Dec216DolbyEProgConfig OBJECT-TYPE
    SYNTAX TypeDolbyCAT561Dec216DolbyEProgConfig
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "This parameter indicates the program configuration of the incoming Dolby E bitstream.
CAT561 Parameter: dolby_e_prog_config"
    ::= { paramEntry 78 }

dolbyCAT561DecMeta71DolbyEMetaDataStatus OBJECT-TYPE
    SYNTAX TypeDolbyCAT561DecMeta71DolbyEMetaDataStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "This parameter indicates whehter metadata is present in the Dolby E input stream. If metadata is present this parameter also indicates whether the metadata is valid or invalid.
CAT561 Parameter: metadata_e_bitstream_status"
    ::= { paramEntry 79 }

dolbyCAT561EncMeta70SerialMetaDataStatus OBJECT-TYPE
    SYNTAX TypeDolbyCAT561DecMeta71DolbyEMetaDataStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "This parameter indicates whehter metadata is present at the external metadata input pin. If metadata is present this parameter also indicates whether the metadata is valid or invalid.
CAT561 Parameter: metadata_serial_bitstream_status"
    ::= { paramEntry 80 }

dolbyCAT561EncMeta72MetaDataReversionStatus OBJECT-TYPE
    SYNTAX TypeDolbyCAT561EncMeta72MetaDataReversionStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Display Reversion Status of used Metadata in Dolby Encoder.
Applies only if Dolby/CAT561/Enc/Meta/6.6-MetaDataReversionMode is enabled.
CAT561 Parameter: metadata_reversion_status_enc_1"
    ::= { paramEntry 81 }

dolbyCAT561Dec217DelayDE OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "This parameter reports the decoder latency of the Dolby E decoder stage. The value is reported in milliseconds.
CAT561 Parameter: dolby_e_decode_latency"
    ::= { paramEntry 82 }

dolbyCAT561Enc222DelayEnc1 OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "This parameter reports back the latency for encoder 1. The value is reported in milliseconds.
CAT561 Parameter: encoder_path_latency_1"
    ::= { paramEntry 83 }

delayVideoCompensateAudio OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Increase video delay to compensate for the maximum possible delay in the audio processing infrastructure.<br>This will make sure that the video output is in lip-sync with the audio content, even if the audio has been Dolby decoded and/or Dolby-encoded. Since the Dolby Dec/Enc processing can require a significant delay (multiple video frames), the maximum possible audio processing time is applied to the video signal, so that an identical total delay in the video and audio paths can be achieved."
    ::= { paramEntry 84 }

delayVideoUserMode OBJECT-TYPE
    SYNTAX TypeDelayVideoUserMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "User-defined video delay control mode (frames / lines / pixels or milliseconds)"
    ::= { paramEntry 85 }

delayVideoFrames OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in frames. Combine with Delay/Video/Lines and Delay/Video/Pixels for total delay"
    ::= { paramEntry 86 }

delayVideoLines OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in lines. Combine with Delay/Video/Frames and Delay/Video/Pixels for total delay"
    ::= { paramEntry 87 }

delayVideoPixels OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI output delay in pixels. Combine with Delay/Video/Frames and Delay/Video/Lines for total delay"
    ::= { paramEntry 88 }

delayVideoTotalMs OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Total SDI output delay in milliseconds"
    ::= { paramEntry 89 }

delayAudioSDIIn11 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 90 }

delayAudioSDIIn12 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 91 }

delayAudioSDIIn21 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 92 }

delayAudioSDIIn22 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 93 }

delayAudioSDIIn31 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 94 }

delayAudioSDIIn32 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 95 }

delayAudioSDIIn41 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 96 }

delayAudioSDIIn42 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 97 }

delayAudioSDIOut11 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 98 }

delayAudioSDIOut12 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 99 }

delayAudioSDIOut21 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 100 }

delayAudioSDIOut22 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 101 }

delayAudioSDIOut31 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 102 }

delayAudioSDIOut32 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 103 }

delayAudioSDIOut41 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 104 }

delayAudioSDIOut42 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 105 }

delayAudioAESIn1 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 106 }

delayAudioAESIn2 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 107 }

delayAudioAESIn3 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 108 }

delayAudioAESIn4 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 109 }

delayAudioAESIn5 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 110 }

delayAudioAESIn6 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 111 }

delayAudioAESIn7 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 112 }

delayAudioAESIn8 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 113 }

delayAudioAESOut1 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 114 }

delayAudioAESOut2 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 115 }

delayAudioAESOut3 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 116 }

delayAudioAESOut4 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 117 }

delayAudioAESOut5 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 118 }

delayAudioAESOut6 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 119 }

delayAudioAESOut7 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 120 }

delayAudioAESOut8 OBJECT-TYPE
    SYNTAX FixedPointValue2
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Audio delay of a stereo AES channel in milliseconds"
    ::= { paramEntry 121 }

inStandard OBJECT-TYPE
    SYNTAX TypeInStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "SDI input status indication"
    ::= { paramEntry 122 }

outStandard OBJECT-TYPE
    SYNTAX TypeInStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video standard of SDI output"
    ::= { paramEntry 123 }

inAes1 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 1 status"
    ::= { paramEntry 124 }

inAes2 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 2 status"
    ::= { paramEntry 125 }

inAes3 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 3 status"
    ::= { paramEntry 126 }

inAes4 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 4 status"
    ::= { paramEntry 127 }

inAes5 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 5 status"
    ::= { paramEntry 128 }

inAes6 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 6 status"
    ::= { paramEntry 129 }

inAes7 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 7 status"
    ::= { paramEntry 130 }

inAes8 OBJECT-TYPE
    SYNTAX TypeInAes1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "input AES 8 status"
    ::= { paramEntry 131 }

inGrp1 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 132 }

inGrp2 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 133 }

inGrp3 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 134 }

inGrp4 OBJECT-TYPE
    SYNTAX TypeInGrp1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Audio group status in incoming SDI"
    ::= { paramEntry 135 }

embedGroup1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 1 into the video output"
    ::= { paramEntry 136 }

embedGroup2 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 2 into the video output"
    ::= { paramEntry 137 }

embedGroup3 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 3 into the video output"
    ::= { paramEntry 138 }

embedGroup4 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Embed group 4 into the video output"
    ::= { paramEntry 139 }

sampleRateConversion1 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 1"
    ::= { paramEntry 140 }

sampleRateConversion2 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 2"
    ::= { paramEntry 141 }

sampleRateConversion3 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 3"
    ::= { paramEntry 142 }

sampleRateConversion4 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 4"
    ::= { paramEntry 143 }

sampleRateConversion5 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 5"
    ::= { paramEntry 144 }

sampleRateConversion6 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 6"
    ::= { paramEntry 145 }

sampleRateConversion7 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 7"
    ::= { paramEntry 146 }

sampleRateConversion8 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 8"
    ::= { paramEntry 147 }

sampleRateConversion9 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 9"
    ::= { paramEntry 148 }

sampleRateConversion10 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 10"
    ::= { paramEntry 149 }

sampleRateConversion11 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 11"
    ::= { paramEntry 150 }

sampleRateConversion12 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 12"
    ::= { paramEntry 151 }

sampleRateConversion13 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 13"
    ::= { paramEntry 152 }

sampleRateConversion14 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 14"
    ::= { paramEntry 153 }

sampleRateConversion15 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 15"
    ::= { paramEntry 154 }

sampleRateConversion16 OBJECT-TYPE
    SYNTAX TypeSampleRateConversion1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enable SRC (sample rate conversion) for AES 16"
    ::= { paramEntry 155 }

sourceEmbAESStereo112 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 1.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES1.1-2.1 and SourceEmbAES1.1-2.2"
    ::= { paramEntry 189 }

sourceEmbAES11 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.1"
    ::= { paramEntry 190 }

sourceEmbAES12 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.2"
    ::= { paramEntry 192 }

sourceEmbAESStereo134 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 1.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES1.3-4.1 and SourceEmbAES1.3-4.2"
    ::= { paramEntry 194 }

sourceEmbAES13 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.3"
    ::= { paramEntry 195 }

sourceEmbAES14 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 1.4"
    ::= { paramEntry 197 }

sourceEmbAESStereo212 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 2.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES2.1-2.1 and SourceEmbAES2.1-2.2"
    ::= { paramEntry 199 }

sourceEmbAES21 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.1"
    ::= { paramEntry 200 }

sourceEmbAES22 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.2"
    ::= { paramEntry 202 }

sourceEmbAESStereo234 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 2.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES2.3-4.1 and SourceEmbAES2.3-4.2"
    ::= { paramEntry 204 }

sourceEmbAES23 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.3"
    ::= { paramEntry 205 }

sourceEmbAES24 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 2.4"
    ::= { paramEntry 207 }

sourceEmbAESStereo312 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 3.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES3.1-2.1 and SourceEmbAES3.1-2.2"
    ::= { paramEntry 209 }

sourceEmbAES31 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.1"
    ::= { paramEntry 210 }

sourceEmbAES32 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.2"
    ::= { paramEntry 212 }

sourceEmbAESStereo334 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 3.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES3.3-4.1 and SourceEmbAES3.3-4.2"
    ::= { paramEntry 214 }

sourceEmbAES33 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.3"
    ::= { paramEntry 215 }

sourceEmbAES34 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 3.4"
    ::= { paramEntry 217 }

sourceEmbAESStereo412 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 4.1-2. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES4.1-2.1 and SourceEmbAES4.1-2.2"
    ::= { paramEntry 219 }

sourceEmbAES41 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.1"
    ::= { paramEntry 220 }

sourceEmbAES42 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.2"
    ::= { paramEntry 222 }

sourceEmbAESStereo434 OBJECT-TYPE
    SYNTAX TypeSourceEmbAESStereo112
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for embedded channel 4.3-4. NOTE this is a stereo selection. I.e. modifying this parameter will implicitly modify the mono-selection parameters SourceEmbAES4.3-4.1 and SourceEmbAES4.3-4.2"
    ::= { paramEntry 224 }

sourceEmbAES43 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.3"
    ::= { paramEntry 225 }

sourceEmbAES44 OBJECT-TYPE
    SYNTAX TypeSourceEmbAES11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Source channel (mono) to feed into embedded channel 4.4"
    ::= { paramEntry 227 }

testToneFrequency OBJECT-TYPE
    SYNTAX TypeTestToneFrequency
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Frequency for the Test Tone"
    ::= { paramEntry 228 }

deleteGroup1 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 229 }

deleteGroup2 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 230 }

deleteGroup3 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 231 }

deleteGroup4 OBJECT-TYPE
    SYNTAX TypeDeleteGroup1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Delete group from incoming SDI before embedding"
    ::= { paramEntry 232 }

embedBits1 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 1 (20/24 bit)"
    ::= { paramEntry 233 }

embedBits2 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 2 (20/24 bit)"
    ::= { paramEntry 234 }

embedBits3 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 3 (20/24 bit)"
    ::= { paramEntry 235 }

embedBits4 OBJECT-TYPE
    SYNTAX TypeEmbedBits1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "set data size for embedding in group 4 (20/24 bit)"
    ::= { paramEntry 236 }

cSBTransSDTV OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Channel Status Block Transparency in SDTV.
OFF: CSB is re-generated to guarantee compatibility with deembedders 
ON:  CSB is embedded, unchanged. Beware of possible imcompatibilities with certain deembedders"
    ::= { paramEntry 237 }

embedded11 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 1"
    ::= { paramEntry 238 }

embedded12 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 2"
    ::= { paramEntry 239 }

embedded13 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 3"
    ::= { paramEntry 240 }

embedded14 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 1, channel 4"
    ::= { paramEntry 241 }

embedded21 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 1"
    ::= { paramEntry 242 }

embedded22 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 2"
    ::= { paramEntry 243 }

embedded23 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 3"
    ::= { paramEntry 244 }

embedded24 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 2, channel 4"
    ::= { paramEntry 245 }

embedded31 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 1"
    ::= { paramEntry 246 }

embedded32 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 2"
    ::= { paramEntry 247 }

embedded33 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 3"
    ::= { paramEntry 248 }

embedded34 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 3, channel 4"
    ::= { paramEntry 249 }

embedded41 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 1"
    ::= { paramEntry 250 }

embedded42 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 2"
    ::= { paramEntry 251 }

embedded43 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 3"
    ::= { paramEntry 252 }

embedded44 OBJECT-TYPE
    SYNTAX TypeEmbedded11
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Presence indication for embedded audio group 4, channel 4"
    ::= { paramEntry 253 }

sourceAESOut11 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.1"
    ::= { paramEntry 256 }

sourceAESOut12 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 1.2"
    ::= { paramEntry 257 }

sourceAESOut21 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.1"
    ::= { paramEntry 261 }

sourceAESOut22 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 2.2"
    ::= { paramEntry 262 }

sourceAESOut31 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 3.1"
    ::= { paramEntry 266 }

sourceAESOut32 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 3.2"
    ::= { paramEntry 267 }

sourceAESOut41 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 4.1"
    ::= { paramEntry 271 }

sourceAESOut42 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 4.2"
    ::= { paramEntry 272 }

sourceAESOut51 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 5.1"
    ::= { paramEntry 276 }

sourceAESOut52 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 5.2"
    ::= { paramEntry 277 }

sourceAESOut61 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 6.1"
    ::= { paramEntry 281 }

sourceAESOut62 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 6.2"
    ::= { paramEntry 282 }

sourceAESOut71 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 7.1"
    ::= { paramEntry 286 }

sourceAESOut72 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 7.2"
    ::= { paramEntry 287 }

sourceAESOut81 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 8.1"
    ::= { paramEntry 291 }

sourceAESOut82 OBJECT-TYPE
    SYNTAX TypeSourceAESOut11
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Source for AES output 8.2"
    ::= { paramEntry 292 }

vFlag OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Activate Valid Audio Flag when missing audio on AES Inputs"
    ::= { paramEntry 294 }

deembPhaseSync OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "If ON, all channels of all groups are deembedded phase aligned to each other.
 All running channels are reset if one channel is added/removed.(NOTE: Such a reset will cause audio data distortion on all groups of the deembedder)

If OFF, the channels of one group are deembedded phase aligned; alignment between groups is not maintained."
    ::= { paramEntry 295 }

deembPhaseSyncVerify OBJECT-TYPE
    SYNTAX TypeDeembPhaseSyncVerify
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "If ON (default) the phase alignment of a deembedded stereo-pair is verified. If the number of samples per channel is not equal, a reset is applied to all aligned channels. (see parameter [DeembPhaseSync] for decision which channels are aligned)"
    ::= { paramEntry 296 }

audioContentSDI1 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 297 }

audioContentSDI2 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 298 }

audioContentSDI3 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 299 }

audioContentSDI4 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 300 }

audioContentSDI5 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 301 }

audioContentSDI6 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 302 }

audioContentSDI7 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 303 }

audioContentSDI8 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type of an audio channel deembedded from the SDI input signal"
    ::= { paramEntry 304 }

audioContentStatusSDI1 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 1.%2"
    ::= { paramEntry 305 }

audioContentStatusSDI2 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 2.%2"
    ::= { paramEntry 306 }

audioContentStatusSDI3 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 3.%2"
    ::= { paramEntry 307 }

audioContentStatusSDI4 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 4.%2"
    ::= { paramEntry 308 }

audioContentStatusSDI5 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 5.%2"
    ::= { paramEntry 309 }

audioContentStatusSDI6 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 6.%2"
    ::= { paramEntry 310 }

audioContentStatusSDI7 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 7.%2"
    ::= { paramEntry 311 }

audioContentStatusSDI8 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type of SDI-audio group 8.%2"
    ::= { paramEntry 312 }

audioContentAES1 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 1"
    ::= { paramEntry 313 }

audioContentAES2 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 2"
    ::= { paramEntry 314 }

audioContentAES3 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 3"
    ::= { paramEntry 315 }

audioContentAES4 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 4"
    ::= { paramEntry 316 }

audioContentAES5 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 5"
    ::= { paramEntry 317 }

audioContentAES6 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 6"
    ::= { paramEntry 318 }

audioContentAES7 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 7"
    ::= { paramEntry 319 }

audioContentAES8 OBJECT-TYPE
    SYNTAX TypeAudioContentSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Set the audio content type on AES-input 8"
    ::= { paramEntry 320 }

audioContentStatusAES1 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 1"
    ::= { paramEntry 321 }

audioContentStatusAES2 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 2"
    ::= { paramEntry 322 }

audioContentStatusAES3 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 3"
    ::= { paramEntry 323 }

audioContentStatusAES4 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 4"
    ::= { paramEntry 324 }

audioContentStatusAES5 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 5"
    ::= { paramEntry 325 }

audioContentStatusAES6 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 6"
    ::= { paramEntry 326 }

audioContentStatusAES7 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 7"
    ::= { paramEntry 327 }

audioContentStatusAES8 OBJECT-TYPE
    SYNTAX TypeAudioContentStatusSDI1
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Shows the audio content type on AES-input 8"
    ::= { paramEntry 328 }

aESPortAssignment1 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 1 as input or output"
    ::= { paramEntry 329 }

aESPortAssignment2 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 2 as input or output"
    ::= { paramEntry 330 }

aESPortAssignment3 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 3 as input or output"
    ::= { paramEntry 331 }

aESPortAssignment4 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 4 as input or output"
    ::= { paramEntry 332 }

aESPortAssignment5 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 5 as input or output"
    ::= { paramEntry 333 }

aESPortAssignment6 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 6 as input or output"
    ::= { paramEntry 334 }

aESPortAssignment7 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 7 as input or output"
    ::= { paramEntry 335 }

aESPortAssignment8 OBJECT-TYPE
    SYNTAX TypeAESPortAssignment1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Assignment AES Port 8 as input or output"
    ::= { paramEntry 336 }

audioGain1L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 1L"
    ::= { paramEntry 337 }

audioMute1L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 1L"
    ::= { paramEntry 338 }

audioInvert1L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 1L"
    ::= { paramEntry 339 }

audioMixDown1L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 1L"
    ::= { paramEntry 340 }

audioSilence1L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 1L"
    ::= { paramEntry 341 }

audioOverload1L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 1L"
    ::= { paramEntry 342 }

audioTestTone1L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 1L"
    ::= { paramEntry 343 }

audioGain1R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 1R"
    ::= { paramEntry 344 }

audioMute1R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 1R"
    ::= { paramEntry 345 }

audioInvert1R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 1R"
    ::= { paramEntry 346 }

audioMixDown1R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 1R"
    ::= { paramEntry 347 }

audioSilence1R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 1R"
    ::= { paramEntry 348 }

audioOverload1R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 1R"
    ::= { paramEntry 349 }

audioTestTone1R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 1R"
    ::= { paramEntry 350 }

audioGain2L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 2L"
    ::= { paramEntry 351 }

audioMute2L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 2L"
    ::= { paramEntry 352 }

audioInvert2L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 2L"
    ::= { paramEntry 353 }

audioMixDown2L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 2L"
    ::= { paramEntry 354 }

audioSilence2L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 2L"
    ::= { paramEntry 355 }

audioOverload2L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 2L"
    ::= { paramEntry 356 }

audioTestTone2L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 2L"
    ::= { paramEntry 357 }

audioGain2R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 2R"
    ::= { paramEntry 358 }

audioMute2R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 2R"
    ::= { paramEntry 359 }

audioInvert2R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 2R"
    ::= { paramEntry 360 }

audioMixDown2R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 2R"
    ::= { paramEntry 361 }

audioSilence2R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 2R"
    ::= { paramEntry 362 }

audioOverload2R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 2R"
    ::= { paramEntry 363 }

audioTestTone2R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 2R"
    ::= { paramEntry 364 }

audioGain3L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 3L"
    ::= { paramEntry 365 }

audioMute3L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 3L"
    ::= { paramEntry 366 }

audioInvert3L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 3L"
    ::= { paramEntry 367 }

audioMixDown3L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 3L"
    ::= { paramEntry 368 }

audioSilence3L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 3L"
    ::= { paramEntry 369 }

audioOverload3L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 3L"
    ::= { paramEntry 370 }

audioTestTone3L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 3L"
    ::= { paramEntry 371 }

audioGain3R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 3R"
    ::= { paramEntry 372 }

audioMute3R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 3R"
    ::= { paramEntry 373 }

audioInvert3R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 3R"
    ::= { paramEntry 374 }

audioMixDown3R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 3R"
    ::= { paramEntry 375 }

audioSilence3R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 3R"
    ::= { paramEntry 376 }

audioOverload3R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 3R"
    ::= { paramEntry 377 }

audioTestTone3R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 3R"
    ::= { paramEntry 378 }

audioGain4L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 4L"
    ::= { paramEntry 379 }

audioMute4L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 4L"
    ::= { paramEntry 380 }

audioInvert4L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 4L"
    ::= { paramEntry 381 }

audioMixDown4L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 4L"
    ::= { paramEntry 382 }

audioSilence4L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 4L"
    ::= { paramEntry 383 }

audioOverload4L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 4L"
    ::= { paramEntry 384 }

audioTestTone4L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 4L"
    ::= { paramEntry 385 }

audioGain4R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 4R"
    ::= { paramEntry 386 }

audioMute4R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 4R"
    ::= { paramEntry 387 }

audioInvert4R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 4R"
    ::= { paramEntry 388 }

audioMixDown4R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 4R"
    ::= { paramEntry 389 }

audioSilence4R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 4R"
    ::= { paramEntry 390 }

audioOverload4R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 4R"
    ::= { paramEntry 391 }

audioTestTone4R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 4R"
    ::= { paramEntry 392 }

audioGain5L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 5L"
    ::= { paramEntry 393 }

audioMute5L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 5L"
    ::= { paramEntry 394 }

audioInvert5L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 5L"
    ::= { paramEntry 395 }

audioMixDown5L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 5L"
    ::= { paramEntry 396 }

audioSilence5L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 5L"
    ::= { paramEntry 397 }

audioOverload5L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 5L"
    ::= { paramEntry 398 }

audioTestTone5L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 5L"
    ::= { paramEntry 399 }

audioGain5R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 5R"
    ::= { paramEntry 400 }

audioMute5R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 5R"
    ::= { paramEntry 401 }

audioInvert5R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 5R"
    ::= { paramEntry 402 }

audioMixDown5R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 5R"
    ::= { paramEntry 403 }

audioSilence5R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 5R"
    ::= { paramEntry 404 }

audioOverload5R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 5R"
    ::= { paramEntry 405 }

audioTestTone5R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 5R"
    ::= { paramEntry 406 }

audioGain6L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 6L"
    ::= { paramEntry 407 }

audioMute6L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 6L"
    ::= { paramEntry 408 }

audioInvert6L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 6L"
    ::= { paramEntry 409 }

audioMixDown6L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 6L"
    ::= { paramEntry 410 }

audioSilence6L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 6L"
    ::= { paramEntry 411 }

audioOverload6L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 6L"
    ::= { paramEntry 412 }

audioTestTone6L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 6L"
    ::= { paramEntry 413 }

audioGain6R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 6R"
    ::= { paramEntry 414 }

audioMute6R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 6R"
    ::= { paramEntry 415 }

audioInvert6R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 6R"
    ::= { paramEntry 416 }

audioMixDown6R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 6R"
    ::= { paramEntry 417 }

audioSilence6R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 6R"
    ::= { paramEntry 418 }

audioOverload6R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 6R"
    ::= { paramEntry 419 }

audioTestTone6R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 6R"
    ::= { paramEntry 420 }

audioGain7L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 7L"
    ::= { paramEntry 421 }

audioMute7L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 7L"
    ::= { paramEntry 422 }

audioInvert7L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 7L"
    ::= { paramEntry 423 }

audioMixDown7L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 7L"
    ::= { paramEntry 424 }

audioSilence7L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 7L"
    ::= { paramEntry 425 }

audioOverload7L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 7L"
    ::= { paramEntry 426 }

audioTestTone7L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 7L"
    ::= { paramEntry 427 }

audioGain7R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 7R"
    ::= { paramEntry 428 }

audioMute7R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 7R"
    ::= { paramEntry 429 }

audioInvert7R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 7R"
    ::= { paramEntry 430 }

audioMixDown7R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 7R"
    ::= { paramEntry 431 }

audioSilence7R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 7R"
    ::= { paramEntry 432 }

audioOverload7R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 7R"
    ::= { paramEntry 433 }

audioTestTone7R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 7R"
    ::= { paramEntry 434 }

audioGain8L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 8L"
    ::= { paramEntry 435 }

audioMute8L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 8L"
    ::= { paramEntry 436 }

audioInvert8L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 8L"
    ::= { paramEntry 437 }

audioMixDown8L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 8L"
    ::= { paramEntry 438 }

audioSilence8L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 8L"
    ::= { paramEntry 439 }

audioOverload8L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 8L"
    ::= { paramEntry 440 }

audioTestTone8L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 8L"
    ::= { paramEntry 441 }

audioGain8R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 8R"
    ::= { paramEntry 442 }

audioMute8R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 8R"
    ::= { paramEntry 443 }

audioInvert8R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 8R"
    ::= { paramEntry 444 }

audioMixDown8R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 8R"
    ::= { paramEntry 445 }

audioSilence8R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 8R"
    ::= { paramEntry 446 }

audioOverload8R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 8R"
    ::= { paramEntry 447 }

audioTestTone8R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 8R"
    ::= { paramEntry 448 }

audioGain9L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 9L"
    ::= { paramEntry 449 }

audioMute9L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 9L"
    ::= { paramEntry 450 }

audioInvert9L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 9L"
    ::= { paramEntry 451 }

audioMixDown9L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 9L"
    ::= { paramEntry 452 }

audioSilence9L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 9L"
    ::= { paramEntry 453 }

audioOverload9L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 9L"
    ::= { paramEntry 454 }

audioTestTone9L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 9L"
    ::= { paramEntry 455 }

audioGain9R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 9R"
    ::= { paramEntry 456 }

audioMute9R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 9R"
    ::= { paramEntry 457 }

audioInvert9R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 9R"
    ::= { paramEntry 458 }

audioMixDown9R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 9R"
    ::= { paramEntry 459 }

audioSilence9R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 9R"
    ::= { paramEntry 460 }

audioOverload9R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 9R"
    ::= { paramEntry 461 }

audioTestTone9R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 9R"
    ::= { paramEntry 462 }

audioGain10L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 10L"
    ::= { paramEntry 463 }

audioMute10L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 10L"
    ::= { paramEntry 464 }

audioInvert10L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 10L"
    ::= { paramEntry 465 }

audioMixDown10L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 10L"
    ::= { paramEntry 466 }

audioSilence10L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 10L"
    ::= { paramEntry 467 }

audioOverload10L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 10L"
    ::= { paramEntry 468 }

audioTestTone10L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 10L"
    ::= { paramEntry 469 }

audioGain10R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 10R"
    ::= { paramEntry 470 }

audioMute10R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 10R"
    ::= { paramEntry 471 }

audioInvert10R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 10R"
    ::= { paramEntry 472 }

audioMixDown10R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 10R"
    ::= { paramEntry 473 }

audioSilence10R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 10R"
    ::= { paramEntry 474 }

audioOverload10R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 10R"
    ::= { paramEntry 475 }

audioTestTone10R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 10R"
    ::= { paramEntry 476 }

audioGain11L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 11L"
    ::= { paramEntry 477 }

audioMute11L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 11L"
    ::= { paramEntry 478 }

audioInvert11L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 11L"
    ::= { paramEntry 479 }

audioMixDown11L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 11L"
    ::= { paramEntry 480 }

audioSilence11L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 11L"
    ::= { paramEntry 481 }

audioOverload11L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 11L"
    ::= { paramEntry 482 }

audioTestTone11L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 11L"
    ::= { paramEntry 483 }

audioGain11R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 11R"
    ::= { paramEntry 484 }

audioMute11R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 11R"
    ::= { paramEntry 485 }

audioInvert11R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 11R"
    ::= { paramEntry 486 }

audioMixDown11R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 11R"
    ::= { paramEntry 487 }

audioSilence11R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 11R"
    ::= { paramEntry 488 }

audioOverload11R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 11R"
    ::= { paramEntry 489 }

audioTestTone11R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 11R"
    ::= { paramEntry 490 }

audioGain12L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 12L"
    ::= { paramEntry 491 }

audioMute12L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 12L"
    ::= { paramEntry 492 }

audioInvert12L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 12L"
    ::= { paramEntry 493 }

audioMixDown12L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 12L"
    ::= { paramEntry 494 }

audioSilence12L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 12L"
    ::= { paramEntry 495 }

audioOverload12L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 12L"
    ::= { paramEntry 496 }

audioTestTone12L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 12L"
    ::= { paramEntry 497 }

audioGain12R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 12R"
    ::= { paramEntry 498 }

audioMute12R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 12R"
    ::= { paramEntry 499 }

audioInvert12R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 12R"
    ::= { paramEntry 500 }

audioMixDown12R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 12R"
    ::= { paramEntry 501 }

audioSilence12R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 12R"
    ::= { paramEntry 502 }

audioOverload12R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 12R"
    ::= { paramEntry 503 }

audioTestTone12R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 12R"
    ::= { paramEntry 504 }

audioGain13L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 13L"
    ::= { paramEntry 505 }

audioMute13L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 13L"
    ::= { paramEntry 506 }

audioInvert13L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 13L"
    ::= { paramEntry 507 }

audioMixDown13L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 13L"
    ::= { paramEntry 508 }

audioSilence13L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 13L"
    ::= { paramEntry 509 }

audioOverload13L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 13L"
    ::= { paramEntry 510 }

audioTestTone13L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 13L"
    ::= { paramEntry 511 }

audioGain13R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 13R"
    ::= { paramEntry 512 }

audioMute13R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 13R"
    ::= { paramEntry 513 }

audioInvert13R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 13R"
    ::= { paramEntry 514 }

audioMixDown13R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 13R"
    ::= { paramEntry 515 }

audioSilence13R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 13R"
    ::= { paramEntry 516 }

audioOverload13R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 13R"
    ::= { paramEntry 517 }

audioTestTone13R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 13R"
    ::= { paramEntry 518 }

audioGain14L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 14L"
    ::= { paramEntry 519 }

audioMute14L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 14L"
    ::= { paramEntry 520 }

audioInvert14L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 14L"
    ::= { paramEntry 521 }

audioMixDown14L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 14L"
    ::= { paramEntry 522 }

audioSilence14L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 14L"
    ::= { paramEntry 523 }

audioOverload14L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 14L"
    ::= { paramEntry 524 }

audioTestTone14L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 14L"
    ::= { paramEntry 525 }

audioGain14R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 14R"
    ::= { paramEntry 526 }

audioMute14R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 14R"
    ::= { paramEntry 527 }

audioInvert14R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 14R"
    ::= { paramEntry 528 }

audioMixDown14R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 14R"
    ::= { paramEntry 529 }

audioSilence14R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 14R"
    ::= { paramEntry 530 }

audioOverload14R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 14R"
    ::= { paramEntry 531 }

audioTestTone14R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 14R"
    ::= { paramEntry 532 }

audioGain15L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 15L"
    ::= { paramEntry 533 }

audioMute15L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 15L"
    ::= { paramEntry 534 }

audioInvert15L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 15L"
    ::= { paramEntry 535 }

audioMixDown15L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 15L"
    ::= { paramEntry 536 }

audioSilence15L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 15L"
    ::= { paramEntry 537 }

audioOverload15L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 15L"
    ::= { paramEntry 538 }

audioTestTone15L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 15L"
    ::= { paramEntry 539 }

audioGain15R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 15R"
    ::= { paramEntry 540 }

audioMute15R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 15R"
    ::= { paramEntry 541 }

audioInvert15R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 15R"
    ::= { paramEntry 542 }

audioMixDown15R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 15R"
    ::= { paramEntry 543 }

audioSilence15R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 15R"
    ::= { paramEntry 544 }

audioOverload15R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 15R"
    ::= { paramEntry 545 }

audioTestTone15R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 15R"
    ::= { paramEntry 546 }

audioGain16L OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 16L"
    ::= { paramEntry 547 }

audioMute16L OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 16L"
    ::= { paramEntry 548 }

audioInvert16L OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 16L"
    ::= { paramEntry 549 }

audioMixDown16L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 16L"
    ::= { paramEntry 550 }

audioSilence16L OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 16L"
    ::= { paramEntry 551 }

audioOverload16L OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 16L"
    ::= { paramEntry 552 }

audioTestTone16L OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 16L"
    ::= { paramEntry 553 }

audioGain16R OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "audio gain for audio stream 16R"
    ::= { paramEntry 554 }

audioMute16R OBJECT-TYPE
    SYNTAX TypeAudioMute1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mute audio stream 16R"
    ::= { paramEntry 555 }

audioInvert16R OBJECT-TYPE
    SYNTAX TypeAudioInvert1L
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Phase invert audio stream 16R"
    ::= { paramEntry 556 }

audioMixDown16R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Mix down audio stream 16R"
    ::= { paramEntry 557 }

audioSilence16R OBJECT-TYPE
    SYNTAX TypeAudioSilence1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "silence in audio stream 16R"
    ::= { paramEntry 558 }

audioOverload16R OBJECT-TYPE
    SYNTAX TypeAudioOverload1L
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "overload by audioprocessing in audio stream 16R"
    ::= { paramEntry 559 }

audioTestTone16R OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Insert test tone in audio stream 16R"
    ::= { paramEntry 560 }

referenceLock OBJECT-TYPE
    SYNTAX TypeReferenceLock
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Lock all outputs to one of *RefIn *SDI1In *SDI2In"
    ::= { paramEntry 566 }

referenceStatus OBJECT-TYPE
    SYNTAX TypeInStandard
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Video Standard of Reference Input"
    ::= { paramEntry 567 }

referenceSource OBJECT-TYPE
    SYNTAX TypeReferenceSource
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Reference Source: extern (local boards backpanel) or intern (central rack distribution)"
    ::= { paramEntry 568 }

freqPreselect OBJECT-TYPE
    SYNTAX TypeFreqPreselect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the frequency domain for the complete device (inputs, reference and outputs)"
    ::= { paramEntry 569 }

freq OBJECT-TYPE
    SYNTAX TypeFreq
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "readonly information about current internal frequency (if FreqPreselect is set to follow Reference)"
    ::= { paramEntry 570 }

inputToRefTolerance OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Open a tolerance window in the relative timing between SDI In and REF In.<br>To be applied for modifying the timing behavior in Framesync mode.When modified to ON, the SDI Input is accepted as aligned to REF even if it arrives up to 12usec later than REF.<br>See User Manual for details."
    ::= { paramEntry 571 }

syncMode1 OBJECT-TYPE
    SYNTAX TypeSyncMode1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select Synchronization Mode for SDI Channel 1"
    ::= { paramEntry 572 }

inputFreezeSDI1 OBJECT-TYPE
    SYNTAX TypeInputFreezeSDI1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify Freeze Mode for Video input channel.
Transparent: TRS Errors are transmitted to output, no freezing
Freeze on TRS Error: Output repeats last correct frame while TRS errors received on input."
    ::= { paramEntry 573 }

syncSDIIn1 OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify that the SDI Input is synchronous to the Reference (while a static offset is allowed).<br>This will add an automatic audio-delay compensation according to that SDI-to-REF offset. As a result, the total Audio/Video processing delay is guaranteed to be matched.<br>NOTE that this setting shall NOT be activated for non-synchronous SDI inputs, because this can lead to intermittent artifacts in the audio path."
    ::= { paramEntry 574 }

sDIIn1FormatPsF OBJECT-TYPE
    SYNTAX TypeSDIIn1FormatPsF
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "By default, the decision between interlaced and progressive segmented frame (PsF) input formats is automatically made based on the embedded VPID. Alternatively, this switch allows to declare all interlaced input streams as PsF resp. as interlaced formats (ignoring the VPID)."
    ::= { paramEntry 575 }

out1TotalProcTime OBJECT-TYPE
    SYNTAX FixedPointValue3
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Show the total delay comprising the processing time and the user delay <br>on the used path from SDI Input to SDI Output 1"
    ::= { paramEntry 576 }

out1ApertureEnable OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable aperture correction"
    ::= { paramEntry 577 }

out1ApertureLevel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: aperture correction level"
    ::= { paramEntry 578 }

out1HBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable H-Blanking"
    ::= { paramEntry 579 }

out1VBlank OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable V-Blanking"
    ::= { paramEntry 580 }

out1Gain OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust Video Gain"
    ::= { paramEntry 581 }

out1Saturation OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Saturation"
    ::= { paramEntry 582 }

out1BlackLevel OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video black level (in IRE)"
    ::= { paramEntry 583 }

out1Hue OBJECT-TYPE
    SYNTAX FixedPointValue1
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: adjust video Hue"
    ::= { paramEntry 584 }

out1TestPatternSelect OBJECT-TYPE
    SYNTAX TypeOut1TestPatternSelect
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern preselection. Will be used when test pattern is switched on, or on auto-freeze"
    ::= { paramEntry 585 }

out1TestPatternStd OBJECT-TYPE
    SYNTAX TypeOut1TestPatternStd
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: test pattern standard.<br>This is only relevant when explicitly switching the test pattern ON (parameter Out1/Test/PatternOn).Otherwise (in case of automatic freeze-to-pattern), the last input standard will be used."
    ::= { paramEntry 586 }

out1TestPatternOn OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: enable preselected test pattern"
    ::= { paramEntry 587 }

out1IfNoInput OBJECT-TYPE
    SYNTAX TypeOut1IfNoInput
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify image content if input is missing.<br>Setting this switch to test pattern will generate the preselected pattern if input is missing."
    ::= { paramEntry 588 }

out1ModifyPsF OBJECT-TYPE
    SYNTAX TypeOut1ModifyPsF
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Allow the output to convert to/from a segmented frame video standard.<br>This setting will only be applied if the input video standard matches the selected conversion (e.g. P to PsF requires a progressive input video standard)"
    ::= { paramEntry 589 }

out1ClipHeadroom OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: Clips Y code values outside the range of 40h to 3ACh
 and Cr, Cb code values outside the range of 40h to 3C0h."
    ::= { paramEntry 590 }

out1FreezeMode OBJECT-TYPE
    SYNTAX TypeOut1FreezeMode
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SDI Out 1: specify freeze mode if input is missing."
    ::= { paramEntry 591 }

clipHeadroomLevel OBJECT-TYPE
    SYNTAX TypeClipHeadroomLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Specify the level to which the YCrCb output code values are clipped, if enabled.
<p>Clipping has to be enabled per individual SDI output and is disabled by default (parameter OutX/ClipHeadroom). If clipping is enabled for an output, the output code values are clipped to the following levels, as defined by this switch:<ul><li>100% => [64... 940] (Y) / [64...960] (C)</li><li>103% => [51... 966] (Y) / [51...973] (C)</li><li>105% => [42... 984] (Y) / [42...982] (C)</li><li>107% => [33...1001] (Y) / [33...991] (C)</li></ul>"
    ::= { paramEntry 592 }

presetsNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "maximum number of user presets"
    ::= { paramEntry 593 }

presetsActive OBJECT-TYPE
    SYNTAX TypePresetsActive
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Select the Active Preset.<br>NOTE: manual modifications to individual processing parameters are only possible if the Active Preset is set to #0. You can load any Preset into #0 (aka <i>Current</i>) and make the required modifications there."
    ::= { paramEntry 594 }

presetsSaveAs OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "saves the current user settings as a user preset, that saved user preset can be later loaded again into the current settings"
    ::= { paramEntry 595 }

presetsLoadToCurrent OBJECT-TYPE
    SYNTAX TypePresetsSaveAs
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "loads selected user preset into the current user settings, all actual user changes will be lost"
    ::= { paramEntry 596 }

presetsName0 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 0"
    ::= { paramEntry 597 }

presetsName1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 1"
    ::= { paramEntry 598 }

presetsName2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 2"
    ::= { paramEntry 599 }

presetsName3 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 3"
    ::= { paramEntry 600 }

presetsName4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 4"
    ::= { paramEntry 601 }

presetsName5 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 5"
    ::= { paramEntry 602 }

presetsName6 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 6"
    ::= { paramEntry 603 }

presetsName7 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "name of user preset 7"
    ::= { paramEntry 604 }

delayAudioSDIOutGang OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gang-Mode: Couple all SDI Out Delay values (modify all delay controls synchronously)"
    ::= { paramEntry 605 }

delayAudioAESOutGang OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Gang-Mode: Couple all AES Out Delay values (modify all delay controls synchronously)"
    ::= { paramEntry 606 }

eventPrimaryPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Primary Power missing"
    ::= { paramEntry 607 }

eventRedundantPowermissingSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Redundant Power missing"
    ::= { paramEntry 608 }

eventFanFailureSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Fan Failure"
    ::= { paramEntry 609 }

eventReferenceNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Reference No Input"
    ::= { paramEntry 610 }

eventSDIInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: SDI Input 1 No Input"
    ::= { paramEntry 611 }

eventCouldnotlocktoReferenceSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to Reference"
    ::= { paramEntry 612 }

eventCouldnotlocktoSDIInput1SNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Could not lock to SDI Input 1"
    ::= { paramEntry 613 }

eventAESInput1NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 1 No Input"
    ::= { paramEntry 614 }

eventAESInput2NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 2 No Input"
    ::= { paramEntry 615 }

eventAESInput3NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 3 No Input"
    ::= { paramEntry 616 }

eventAESInput4NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 4 No Input"
    ::= { paramEntry 617 }

eventAESInput5NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 5 No Input"
    ::= { paramEntry 618 }

eventAESInput6NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 6 No Input"
    ::= { paramEntry 619 }

eventAESInput7NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 7 No Input"
    ::= { paramEntry 620 }

eventAESInput8NoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Input 8 No Input"
    ::= { paramEntry 621 }

eventEmbedderMissingInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: Embedder Missing Input"
    ::= { paramEntry 622 }

eventAESOutputNoInputSNMP OBJECT-TYPE
    SYNTAX TypeEventPrimaryPowermissingSNMP
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "SNMP Trap for  Event: AES Output No Input"
    ::= { paramEntry 623 }

crossBarAudioOutEmbAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Crossbar for Embedded Audio Out AES"
    ::= { paramEntry 624 }

crossBarAudioOutAES OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mutable Crossbar for External Audio Out AES"
    ::= { paramEntry 625 }

dolbyCAT561EncMeta623DRCProfileOverwriteEnab OBJECT-TYPE
    SYNTAX OnOffValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "Enables the <i>compression</i> and <i>dynamic range</i> parameters to be overwritten by the Dolby-Encoder.<br>Applies only if the current MetaDataSourceValue is set to a dynamic source (e.g. <i>Decoder Out</i>).<br>CAT561 Parameter: md_ovr_comp_prof_enable_enc_1"
    ::= { paramEntry 626 }

sNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial Number"
    ::= { paramEntry 627 }

-- Parameter table
paramTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Table of PDA5280-D parameters"
    ::= { sw623 1 }

paramEntry OBJECT-TYPE
    SYNTAX ParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "A row in the table of PDA5280-D parameters"
    INDEX { IMPLIED position }
    ::= { paramTable 1 }

ParamEntry ::= SEQUENCE {
    typeName DisplayString,
    displayName DisplayString,
    position OCTET STRING,
    uptime TimeTicks,
    type DisplayString,
    version DisplayString,
    factoryReset TypeFactoryReset,
    lock OnOffValue,
    locate OnOffValue,
    statusColor TypeStatusColor,
    statusColorRGB DisplayString,
    statusText DisplayString,
    backpanelStatus TypeBackpanelStatus,
    boardID Integer32,
    eventPrimaryPowermissing OnOffValue,
    eventRedundantPowermissing OnOffValue,
    eventFanFailure OnOffValue,
    eventReferenceNoInput OnOffValue,
    eventSDIInput1NoInput OnOffValue,
    eventCouldnotlocktoReference OnOffValue,
    eventCouldnotlocktoSDIInput1 OnOffValue,
    eventAESInput1NoInput OnOffValue,
    eventAESInput2NoInput OnOffValue,
    eventAESInput3NoInput OnOffValue,
    eventAESInput4NoInput OnOffValue,
    eventAESInput5NoInput OnOffValue,
    eventAESInput6NoInput OnOffValue,
    eventAESInput7NoInput OnOffValue,
    eventAESInput8NoInput OnOffValue,
    eventEmbedderMissingInput OnOffValue,
    eventAESOutputNoInput OnOffValue,
    dolbyBoardType TypeDolbyBoardType,
    dolbyCAT56122HWVersion Integer32,
    dolbyCAT56121FWVersion Integer32,
    dolbyCAT56123SerialNumber Integer32,
    dolbyCAT561DecoderSource TypeDolbyCAT561DecoderSource,
    dolbyCAT561PCMSource TypeDolbyCAT561DecoderSource,
    dolbyCAT561EncAudioSource TypeDolbyCAT561EncAudioSource,
    dolbyCAT561EncAudioSourceAutomatic OnOffValue,
    dolbyCAT561EncMetaMetaDataSource TypeDolbyCAT561EncMetaMetaDataSource,
    dolbyCAT561Dec00DolbyEMode TypeDolbyCAT561Dec00DolbyEMode,
    dolbyCAT561Dec01DolbyEApplyDialNorm TypeDolbyCAT561Dec01DolbyEApplyDialNorm,
    dolbyCAT561Dec013DolbyEWrapAround OnOffValue,
    dolbyCAT561EncMeta80ProgramID TypeDolbyCAT561EncMeta80ProgramID,
    dolbyCAT561Enc30Configuration TypeDolbyCAT561Enc30Configuration,
    dolbyCAT561Enc31Mode TypeDolbyCAT561Enc31Mode,
    dolbyCAT561Enc35DDPlusDataRate TypeDolbyCAT561Enc35DDPlusDataRate,
    dolbyCAT561Enc39DDDataRate TypeDolbyCAT561Enc39DDDataRate,
    dolbyCAT561EncMeta60MetaDataSourceStatus TypeDolbyCAT561EncMeta60MetaDataSourceStatus,
    dolbyCAT561EncMeta66MetaDataReversionMode TypeDolbyCAT561EncMeta66MetaDataReversionMode,
    dolbyCAT561Meta610MetaOutputReversionMode TypeDolbyCAT561EncMeta66MetaDataReversionMode,
    dolbyCAT561EncMeta619DialNormOverwriteValue TypeDolbyCAT561EncMeta619DialNormOverwriteValue,
    dolbyCAT561EncMeta615DialNormOverwriteEnable OnOffValue,
    dolbyCAT561EncMeta627ComprProfileValue TypeDolbyCAT561EncMeta627ComprProfileValue,
    dolbyCAT561EncMeta631DRProfileValue TypeDolbyCAT561EncMeta627ComprProfileValue,
    dolbyCAT561EncMeta623DRCProfileOverwriteEnable OnOffValue,
    dolbyCAT561EncMeta639SurroundMode TypeDolbyCAT561EncMeta639SurroundMode,
    dolbyCAT561EncMeta643DownMixmode TypeDolbyCAT561EncMeta643DownMixmode,
    dolbyCAT561EncMeta635DownMixOverwriteEnable OnOffValue,
    dolbyCAT561EncMeta82AudioServiceType TypeDolbyCAT561EncMeta82AudioServiceType,
    dolbyCAT561EncMeta83AudioCodingMode TypeDolbyCAT561EncMeta83AudioCodingMode,
    dolbyCAT561EncMeta84CenterMixLevel TypeDolbyCAT561EncMeta84CenterMixLevel,
    dolbyCAT561EncMeta85SurroundMixLevel TypeDolbyCAT561EncMeta85SurroundMixLevel,
    dolbyCAT561EncMeta86SurroundMode TypeDolbyCAT561EncMeta639SurroundMode,
    dolbyCAT561EncMeta87LFEencoded OnOffValue,
    dolbyCAT561EncMeta88DialNorm TypeDolbyCAT561EncMeta88DialNorm,
    dolbyCAT561EncMeta814Copyright OnOffValue,
    dolbyCAT561EncMeta810LanguageCode TypeDolbyCAT561EncMeta810LanguageCode,
    dolbyCAT561EncMeta89LanguageCodeExists OnOffValue,
    dolbyCAT561EncMeta817XBSI1DownMixmode TypeDolbyCAT561EncMeta643DownMixmode,
    dolbyCAT561EncMeta816XBSI1Exists OnOffValue,
    dolbyCAT561EncMeta818XBSI1LtRtCenterMix TypeDolbyCAT561EncMeta818XBSI1LtRtCenterMix,
    dolbyCAT561EncMeta819XBSI1LtRtSurroundMix TypeDolbyCAT561EncMeta818XBSI1LtRtCenterMix,
    dolbyCAT561EncMeta820XBSI1LoRoCenterMix TypeDolbyCAT561EncMeta818XBSI1LtRtCenterMix,
    dolbyCAT561EncMeta821XBSI1LoRoSurroundMix TypeDolbyCAT561EncMeta818XBSI1LtRtCenterMix,
    dolbyCAT561Board215FeatureSet TypeDolbyCAT561Board215FeatureSet,
    dolbyCAT561Dec216DolbyEProgConfig TypeDolbyCAT561Dec216DolbyEProgConfig,
    dolbyCAT561DecMeta71DolbyEMetaDataStatus TypeDolbyCAT561DecMeta71DolbyEMetaDataStatus,
    dolbyCAT561EncMeta70SerialMetaDataStatus TypeDolbyCAT561DecMeta71DolbyEMetaDataStatus,
    dolbyCAT561EncMeta72MetaDataReversionStatus TypeDolbyCAT561EncMeta72MetaDataReversionStatus,
    dolbyCAT561Dec217DelayDE Integer32,
    dolbyCAT561Enc222DelayEnc1 Integer32,
    delayVideoCompensateAudio OnOffValue,
    delayVideoUserMode TypeDelayVideoUserMode,
    delayVideoFrames Integer32,
    delayVideoLines Integer32,
    delayVideoPixels Integer32,
    delayVideoTotalMs FixedPointValue3,
    delayAudioSDIIn11 FixedPointValue2,
    delayAudioSDIIn12 FixedPointValue2,
    delayAudioSDIIn21 FixedPointValue2,
    delayAudioSDIIn22 FixedPointValue2,
    delayAudioSDIIn31 FixedPointValue2,
    delayAudioSDIIn32 FixedPointValue2,
    delayAudioSDIIn41 FixedPointValue2,
    delayAudioSDIIn42 FixedPointValue2,
    delayAudioSDIOut11 FixedPointValue2,
    delayAudioSDIOut12 FixedPointValue2,
    delayAudioSDIOut21 FixedPointValue2,
    delayAudioSDIOut22 FixedPointValue2,
    delayAudioSDIOut31 FixedPointValue2,
    delayAudioSDIOut32 FixedPointValue2,
    delayAudioSDIOut41 FixedPointValue2,
    delayAudioSDIOut42 FixedPointValue2,
    delayAudioAESIn1 FixedPointValue2,
    delayAudioAESIn2 FixedPointValue2,
    delayAudioAESIn3 FixedPointValue2,
    delayAudioAESIn4 FixedPointValue2,
    delayAudioAESIn5 FixedPointValue2,
    delayAudioAESIn6 FixedPointValue2,
    delayAudioAESIn7 FixedPointValue2,
    delayAudioAESIn8 FixedPointValue2,
    delayAudioAESOut1 FixedPointValue2,
    delayAudioAESOut2 FixedPointValue2,
    delayAudioAESOut3 FixedPointValue2,
    delayAudioAESOut4 FixedPointValue2,
    delayAudioAESOut5 FixedPointValue2,
    delayAudioAESOut6 FixedPointValue2,
    delayAudioAESOut7 FixedPointValue2,
    delayAudioAESOut8 FixedPointValue2,
    inStandard TypeInStandard,
    outStandard TypeInStandard,
    inAes1 TypeInAes1,
    inAes2 TypeInAes1,
    inAes3 TypeInAes1,
    inAes4 TypeInAes1,
    inAes5 TypeInAes1,
    inAes6 TypeInAes1,
    inAes7 TypeInAes1,
    inAes8 TypeInAes1,
    inGrp1 TypeInGrp1,
    inGrp2 TypeInGrp1,
    inGrp3 TypeInGrp1,
    inGrp4 TypeInGrp1,
    embedGroup1 OnOffValue,
    embedGroup2 OnOffValue,
    embedGroup3 OnOffValue,
    embedGroup4 OnOffValue,
    sampleRateConversion1 TypeSampleRateConversion1,
    sampleRateConversion2 TypeSampleRateConversion1,
    sampleRateConversion3 TypeSampleRateConversion1,
    sampleRateConversion4 TypeSampleRateConversion1,
    sampleRateConversion5 TypeSampleRateConversion1,
    sampleRateConversion6 TypeSampleRateConversion1,
    sampleRateConversion7 TypeSampleRateConversion1,
    sampleRateConversion8 TypeSampleRateConversion1,
    sampleRateConversion9 TypeSampleRateConversion1,
    sampleRateConversion10 TypeSampleRateConversion1,
    sampleRateConversion11 TypeSampleRateConversion1,
    sampleRateConversion12 TypeSampleRateConversion1,
    sampleRateConversion13 TypeSampleRateConversion1,
    sampleRateConversion14 TypeSampleRateConversion1,
    sampleRateConversion15 TypeSampleRateConversion1,
    sampleRateConversion16 TypeSampleRateConversion1,
    sourceEmbAESStereo112 TypeSourceEmbAESStereo112,
    sourceEmbAES11 TypeSourceEmbAES11,
    sourceEmbAES12 TypeSourceEmbAES11,
    sourceEmbAESStereo134 TypeSourceEmbAESStereo112,
    sourceEmbAES13 TypeSourceEmbAES11,
    sourceEmbAES14 TypeSourceEmbAES11,
    sourceEmbAESStereo212 TypeSourceEmbAESStereo112,
    sourceEmbAES21 TypeSourceEmbAES11,
    sourceEmbAES22 TypeSourceEmbAES11,
    sourceEmbAESStereo234 TypeSourceEmbAESStereo112,
    sourceEmbAES23 TypeSourceEmbAES11,
    sourceEmbAES24 TypeSourceEmbAES11,
    sourceEmbAESStereo312 TypeSourceEmbAESStereo112,
    sourceEmbAES31 TypeSourceEmbAES11,
    sourceEmbAES32 TypeSourceEmbAES11,
    sourceEmbAESStereo334 TypeSourceEmbAESStereo112,
    sourceEmbAES33 TypeSourceEmbAES11,
    sourceEmbAES34 TypeSourceEmbAES11,
    sourceEmbAESStereo412 TypeSourceEmbAESStereo112,
    sourceEmbAES41 TypeSourceEmbAES11,
    sourceEmbAES42 TypeSourceEmbAES11,
    sourceEmbAESStereo434 TypeSourceEmbAESStereo112,
    sourceEmbAES43 TypeSourceEmbAES11,
    sourceEmbAES44 TypeSourceEmbAES11,
    testToneFrequency TypeTestToneFrequency,
    deleteGroup1 TypeDeleteGroup1,
    deleteGroup2 TypeDeleteGroup1,
    deleteGroup3 TypeDeleteGroup1,
    deleteGroup4 TypeDeleteGroup1,
    embedBits1 TypeEmbedBits1,
    embedBits2 TypeEmbedBits1,
    embedBits3 TypeEmbedBits1,
    embedBits4 TypeEmbedBits1,
    cSBTransSDTV OnOffValue,
    embedded11 TypeEmbedded11,
    embedded12 TypeEmbedded11,
    embedded13 TypeEmbedded11,
    embedded14 TypeEmbedded11,
    embedded21 TypeEmbedded11,
    embedded22 TypeEmbedded11,
    embedded23 TypeEmbedded11,
    embedded24 TypeEmbedded11,
    embedded31 TypeEmbedded11,
    embedded32 TypeEmbedded11,
    embedded33 TypeEmbedded11,
    embedded34 TypeEmbedded11,
    embedded41 TypeEmbedded11,
    embedded42 TypeEmbedded11,
    embedded43 TypeEmbedded11,
    embedded44 TypeEmbedded11,
    sourceAESOut11 TypeSourceAESOut11,
    sourceAESOut12 TypeSourceAESOut11,
    sourceAESOut21 TypeSourceAESOut11,
    sourceAESOut22 TypeSourceAESOut11,
    sourceAESOut31 TypeSourceAESOut11,
    sourceAESOut32 TypeSourceAESOut11,
    sourceAESOut41 TypeSourceAESOut11,
    sourceAESOut42 TypeSourceAESOut11,
    sourceAESOut51 TypeSourceAESOut11,
    sourceAESOut52 TypeSourceAESOut11,
    sourceAESOut61 TypeSourceAESOut11,
    sourceAESOut62 TypeSourceAESOut11,
    sourceAESOut71 TypeSourceAESOut11,
    sourceAESOut72 TypeSourceAESOut11,
    sourceAESOut81 TypeSourceAESOut11,
    sourceAESOut82 TypeSourceAESOut11,
    vFlag OnOffValue,
    deembPhaseSync OnOffValue,
    deembPhaseSyncVerify TypeDeembPhaseSyncVerify,
    audioContentSDI1 TypeAudioContentSDI1,
    audioContentSDI2 TypeAudioContentSDI1,
    audioContentSDI3 TypeAudioContentSDI1,
    audioContentSDI4 TypeAudioContentSDI1,
    audioContentSDI5 TypeAudioContentSDI1,
    audioContentSDI6 TypeAudioContentSDI1,
    audioContentSDI7 TypeAudioContentSDI1,
    audioContentSDI8 TypeAudioContentSDI1,
    audioContentStatusSDI1 TypeAudioContentStatusSDI1,
    audioContentStatusSDI2 TypeAudioContentStatusSDI1,
    audioContentStatusSDI3 TypeAudioContentStatusSDI1,
    audioContentStatusSDI4 TypeAudioContentStatusSDI1,
    audioContentStatusSDI5 TypeAudioContentStatusSDI1,
    audioContentStatusSDI6 TypeAudioContentStatusSDI1,
    audioContentStatusSDI7 TypeAudioContentStatusSDI1,
    audioContentStatusSDI8 TypeAudioContentStatusSDI1,
    audioContentAES1 TypeAudioContentSDI1,
    audioContentAES2 TypeAudioContentSDI1,
    audioContentAES3 TypeAudioContentSDI1,
    audioContentAES4 TypeAudioContentSDI1,
    audioContentAES5 TypeAudioContentSDI1,
    audioContentAES6 TypeAudioContentSDI1,
    audioContentAES7 TypeAudioContentSDI1,
    audioContentAES8 TypeAudioContentSDI1,
    audioContentStatusAES1 TypeAudioContentStatusSDI1,
    audioContentStatusAES2 TypeAudioContentStatusSDI1,
    audioContentStatusAES3 TypeAudioContentStatusSDI1,
    audioContentStatusAES4 TypeAudioContentStatusSDI1,
    audioContentStatusAES5 TypeAudioContentStatusSDI1,
    audioContentStatusAES6 TypeAudioContentStatusSDI1,
    audioContentStatusAES7 TypeAudioContentStatusSDI1,
    audioContentStatusAES8 TypeAudioContentStatusSDI1,
    aESPortAssignment1 TypeAESPortAssignment1,
    aESPortAssignment2 TypeAESPortAssignment1,
    aESPortAssignment3 TypeAESPortAssignment1,
    aESPortAssignment4 TypeAESPortAssignment1,
    aESPortAssignment5 TypeAESPortAssignment1,
    aESPortAssignment6 TypeAESPortAssignment1,
    aESPortAssignment7 TypeAESPortAssignment1,
    aESPortAssignment8 TypeAESPortAssignment1,
    audioGain1L FixedPointValue1,
    audioMute1L TypeAudioMute1L,
    audioInvert1L TypeAudioInvert1L,
    audioMixDown1L OnOffValue,
    audioSilence1L TypeAudioSilence1L,
    audioOverload1L TypeAudioOverload1L,
    audioTestTone1L OnOffValue,
    audioGain1R FixedPointValue1,
    audioMute1R TypeAudioMute1L,
    audioInvert1R TypeAudioInvert1L,
    audioMixDown1R OnOffValue,
    audioSilence1R TypeAudioSilence1L,
    audioOverload1R TypeAudioOverload1L,
    audioTestTone1R OnOffValue,
    audioGain2L FixedPointValue1,
    audioMute2L TypeAudioMute1L,
    audioInvert2L TypeAudioInvert1L,
    audioMixDown2L OnOffValue,
    audioSilence2L TypeAudioSilence1L,
    audioOverload2L TypeAudioOverload1L,
    audioTestTone2L OnOffValue,
    audioGain2R FixedPointValue1,
    audioMute2R TypeAudioMute1L,
    audioInvert2R TypeAudioInvert1L,
    audioMixDown2R OnOffValue,
    audioSilence2R TypeAudioSilence1L,
    audioOverload2R TypeAudioOverload1L,
    audioTestTone2R OnOffValue,
    audioGain3L FixedPointValue1,
    audioMute3L TypeAudioMute1L,
    audioInvert3L TypeAudioInvert1L,
    audioMixDown3L OnOffValue,
    audioSilence3L TypeAudioSilence1L,
    audioOverload3L TypeAudioOverload1L,
    audioTestTone3L OnOffValue,
    audioGain3R FixedPointValue1,
    audioMute3R TypeAudioMute1L,
    audioInvert3R TypeAudioInvert1L,
    audioMixDown3R OnOffValue,
    audioSilence3R TypeAudioSilence1L,
    audioOverload3R TypeAudioOverload1L,
    audioTestTone3R OnOffValue,
    audioGain4L FixedPointValue1,
    audioMute4L TypeAudioMute1L,
    audioInvert4L TypeAudioInvert1L,
    audioMixDown4L OnOffValue,
    audioSilence4L TypeAudioSilence1L,
    audioOverload4L TypeAudioOverload1L,
    audioTestTone4L OnOffValue,
    audioGain4R FixedPointValue1,
    audioMute4R TypeAudioMute1L,
    audioInvert4R TypeAudioInvert1L,
    audioMixDown4R OnOffValue,
    audioSilence4R TypeAudioSilence1L,
    audioOverload4R TypeAudioOverload1L,
    audioTestTone4R OnOffValue,
    audioGain5L FixedPointValue1,
    audioMute5L TypeAudioMute1L,
    audioInvert5L TypeAudioInvert1L,
    audioMixDown5L OnOffValue,
    audioSilence5L TypeAudioSilence1L,
    audioOverload5L TypeAudioOverload1L,
    audioTestTone5L OnOffValue,
    audioGain5R FixedPointValue1,
    audioMute5R TypeAudioMute1L,
    audioInvert5R TypeAudioInvert1L,
    audioMixDown5R OnOffValue,
    audioSilence5R TypeAudioSilence1L,
    audioOverload5R TypeAudioOverload1L,
    audioTestTone5R OnOffValue,
    audioGain6L FixedPointValue1,
    audioMute6L TypeAudioMute1L,
    audioInvert6L TypeAudioInvert1L,
    audioMixDown6L OnOffValue,
    audioSilence6L TypeAudioSilence1L,
    audioOverload6L TypeAudioOverload1L,
    audioTestTone6L OnOffValue,
    audioGain6R FixedPointValue1,
    audioMute6R TypeAudioMute1L,
    audioInvert6R TypeAudioInvert1L,
    audioMixDown6R OnOffValue,
    audioSilence6R TypeAudioSilence1L,
    audioOverload6R TypeAudioOverload1L,
    audioTestTone6R OnOffValue,
    audioGain7L FixedPointValue1,
    audioMute7L TypeAudioMute1L,
    audioInvert7L TypeAudioInvert1L,
    audioMixDown7L OnOffValue,
    audioSilence7L TypeAudioSilence1L,
    audioOverload7L TypeAudioOverload1L,
    audioTestTone7L OnOffValue,
    audioGain7R FixedPointValue1,
    audioMute7R TypeAudioMute1L,
    audioInvert7R TypeAudioInvert1L,
    audioMixDown7R OnOffValue,
    audioSilence7R TypeAudioSilence1L,
    audioOverload7R TypeAudioOverload1L,
    audioTestTone7R OnOffValue,
    audioGain8L FixedPointValue1,
    audioMute8L TypeAudioMute1L,
    audioInvert8L TypeAudioInvert1L,
    audioMixDown8L OnOffValue,
    audioSilence8L TypeAudioSilence1L,
    audioOverload8L TypeAudioOverload1L,
    audioTestTone8L OnOffValue,
    audioGain8R FixedPointValue1,
    audioMute8R TypeAudioMute1L,
    audioInvert8R TypeAudioInvert1L,
    audioMixDown8R OnOffValue,
    audioSilence8R TypeAudioSilence1L,
    audioOverload8R TypeAudioOverload1L,
    audioTestTone8R OnOffValue,
    audioGain9L FixedPointValue1,
    audioMute9L TypeAudioMute1L,
    audioInvert9L TypeAudioInvert1L,
    audioMixDown9L OnOffValue,
    audioSilence9L TypeAudioSilence1L,
    audioOverload9L TypeAudioOverload1L,
    audioTestTone9L OnOffValue,
    audioGain9R FixedPointValue1,
    audioMute9R TypeAudioMute1L,
    audioInvert9R TypeAudioInvert1L,
    audioMixDown9R OnOffValue,
    audioSilence9R TypeAudioSilence1L,
    audioOverload9R TypeAudioOverload1L,
    audioTestTone9R OnOffValue,
    audioGain10L FixedPointValue1,
    audioMute10L TypeAudioMute1L,
    audioInvert10L TypeAudioInvert1L,
    audioMixDown10L OnOffValue,
    audioSilence10L TypeAudioSilence1L,
    audioOverload10L TypeAudioOverload1L,
    audioTestTone10L OnOffValue,
    audioGain10R FixedPointValue1,
    audioMute10R TypeAudioMute1L,
    audioInvert10R TypeAudioInvert1L,
    audioMixDown10R OnOffValue,
    audioSilence10R TypeAudioSilence1L,
    audioOverload10R TypeAudioOverload1L,
    audioTestTone10R OnOffValue,
    audioGain11L FixedPointValue1,
    audioMute11L TypeAudioMute1L,
    audioInvert11L TypeAudioInvert1L,
    audioMixDown11L OnOffValue,
    audioSilence11L TypeAudioSilence1L,
    audioOverload11L TypeAudioOverload1L,
    audioTestTone11L OnOffValue,
    audioGain11R FixedPointValue1,
    audioMute11R TypeAudioMute1L,
    audioInvert11R TypeAudioInvert1L,
    audioMixDown11R OnOffValue,
    audioSilence11R TypeAudioSilence1L,
    audioOverload11R TypeAudioOverload1L,
    audioTestTone11R OnOffValue,
    audioGain12L FixedPointValue1,
    audioMute12L TypeAudioMute1L,
    audioInvert12L TypeAudioInvert1L,
    audioMixDown12L OnOffValue,
    audioSilence12L TypeAudioSilence1L,
    audioOverload12L TypeAudioOverload1L,
    audioTestTone12L OnOffValue,
    audioGain12R FixedPointValue1,
    audioMute12R TypeAudioMute1L,
    audioInvert12R TypeAudioInvert1L,
    audioMixDown12R OnOffValue,
    audioSilence12R TypeAudioSilence1L,
    audioOverload12R TypeAudioOverload1L,
    audioTestTone12R OnOffValue,
    audioGain13L FixedPointValue1,
    audioMute13L TypeAudioMute1L,
    audioInvert13L TypeAudioInvert1L,
    audioMixDown13L OnOffValue,
    audioSilence13L TypeAudioSilence1L,
    audioOverload13L TypeAudioOverload1L,
    audioTestTone13L OnOffValue,
    audioGain13R FixedPointValue1,
    audioMute13R TypeAudioMute1L,
    audioInvert13R TypeAudioInvert1L,
    audioMixDown13R OnOffValue,
    audioSilence13R TypeAudioSilence1L,
    audioOverload13R TypeAudioOverload1L,
    audioTestTone13R OnOffValue,
    audioGain14L FixedPointValue1,
    audioMute14L TypeAudioMute1L,
    audioInvert14L TypeAudioInvert1L,
    audioMixDown14L OnOffValue,
    audioSilence14L TypeAudioSilence1L,
    audioOverload14L TypeAudioOverload1L,
    audioTestTone14L OnOffValue,
    audioGain14R FixedPointValue1,
    audioMute14R TypeAudioMute1L,
    audioInvert14R TypeAudioInvert1L,
    audioMixDown14R OnOffValue,
    audioSilence14R TypeAudioSilence1L,
    audioOverload14R TypeAudioOverload1L,
    audioTestTone14R OnOffValue,
    audioGain15L FixedPointValue1,
    audioMute15L TypeAudioMute1L,
    audioInvert15L TypeAudioInvert1L,
    audioMixDown15L OnOffValue,
    audioSilence15L TypeAudioSilence1L,
    audioOverload15L TypeAudioOverload1L,
    audioTestTone15L OnOffValue,
    audioGain15R FixedPointValue1,
    audioMute15R TypeAudioMute1L,
    audioInvert15R TypeAudioInvert1L,
    audioMixDown15R OnOffValue,
    audioSilence15R TypeAudioSilence1L,
    audioOverload15R TypeAudioOverload1L,
    audioTestTone15R OnOffValue,
    audioGain16L FixedPointValue1,
    audioMute16L TypeAudioMute1L,
    audioInvert16L TypeAudioInvert1L,
    audioMixDown16L OnOffValue,
    audioSilence16L TypeAudioSilence1L,
    audioOverload16L TypeAudioOverload1L,
    audioTestTone16L OnOffValue,
    audioGain16R FixedPointValue1,
    audioMute16R TypeAudioMute1L,
    audioInvert16R TypeAudioInvert1L,
    audioMixDown16R OnOffValue,
    audioSilence16R TypeAudioSilence1L,
    audioOverload16R TypeAudioOverload1L,
    audioTestTone16R OnOffValue,
    referenceLock TypeReferenceLock,
    referenceStatus TypeInStandard,
    referenceSource TypeReferenceSource,
    freqPreselect TypeFreqPreselect,
    freq TypeFreq,
    inputToRefTolerance OnOffValue,
    syncMode1 TypeSyncMode1,
    inputFreezeSDI1 TypeInputFreezeSDI1,
    syncSDIIn1 OnOffValue,
    sDIIn1FormatPsF TypeSDIIn1FormatPsF,
    out1TotalProcTime FixedPointValue3,
    out1ApertureEnable OnOffValue,
    out1ApertureLevel Integer32,
    out1HBlank OnOffValue,
    out1VBlank OnOffValue,
    out1Gain Integer32,
    out1Saturation Integer32,
    out1BlackLevel FixedPointValue1,
    out1Hue FixedPointValue1,
    out1TestPatternSelect TypeOut1TestPatternSelect,
    out1TestPatternStd TypeOut1TestPatternStd,
    out1TestPatternOn OnOffValue,
    out1IfNoInput TypeOut1IfNoInput,
    out1ModifyPsF TypeOut1ModifyPsF,
    out1ClipHeadroom OnOffValue,
    out1FreezeMode TypeOut1FreezeMode,
    clipHeadroomLevel TypeClipHeadroomLevel,
    presetsNumber Integer32,
    presetsActive TypePresetsActive,
    presetsSaveAs TypePresetsSaveAs,
    presetsLoadToCurrent TypePresetsSaveAs,
    presetsName0 DisplayString,
    presetsName1 DisplayString,
    presetsName2 DisplayString,
    presetsName3 DisplayString,
    presetsName4 DisplayString,
    presetsName5 DisplayString,
    presetsName6 DisplayString,
    presetsName7 DisplayString,
    delayAudioSDIOutGang OnOffValue,
    delayAudioAESOutGang OnOffValue,
    eventPrimaryPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventRedundantPowermissingSNMP TypeEventPrimaryPowermissingSNMP,
    eventFanFailureSNMP TypeEventPrimaryPowermissingSNMP,
    eventReferenceNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventSDIInput1NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventCouldnotlocktoReferenceSNMP TypeEventPrimaryPowermissingSNMP,
    eventCouldnotlocktoSDIInput1SNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput1NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput2NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput3NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput4NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput5NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput6NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput7NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESInput8NoInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventEmbedderMissingInputSNMP TypeEventPrimaryPowermissingSNMP,
    eventAESOutputNoInputSNMP TypeEventPrimaryPowermissingSNMP,
    crossBarAudioOutEmbAES DisplayString,
    crossBarAudioOutAES DisplayString,
    dolbyCAT561EncMeta623DRCProfileOverwriteEnab OnOffValue,
    sNumber DisplayString }

-- Conformance statements
conformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION "Conformance declaration of PDA5280-D"
    ::= { sw623 2 }

paramGroup OBJECT-GROUP
    OBJECTS {
        typeName,
        displayName,
        position,
        uptime,
        type,
        version,
        factoryReset,
        lock,
        locate,
        statusColor,
        statusColorRGB,
        statusText,
        backpanelStatus,
        boardID,
        eventPrimaryPowermissing,
        eventRedundantPowermissing,
        eventFanFailure,
        eventReferenceNoInput,
        eventSDIInput1NoInput,
        eventCouldnotlocktoReference,
        eventCouldnotlocktoSDIInput1,
        eventAESInput1NoInput,
        eventAESInput2NoInput,
        eventAESInput3NoInput,
        eventAESInput4NoInput,
        eventAESInput5NoInput,
        eventAESInput6NoInput,
        eventAESInput7NoInput,
        eventAESInput8NoInput,
        eventEmbedderMissingInput,
        eventAESOutputNoInput,
        dolbyBoardType,
        dolbyCAT56122HWVersion,
        dolbyCAT56121FWVersion,
        dolbyCAT56123SerialNumber,
        dolbyCAT561DecoderSource,
        dolbyCAT561PCMSource,
        dolbyCAT561EncAudioSource,
        dolbyCAT561EncAudioSourceAutomatic,
        dolbyCAT561EncMetaMetaDataSource,
        dolbyCAT561Dec00DolbyEMode,
        dolbyCAT561Dec01DolbyEApplyDialNorm,
        dolbyCAT561Dec013DolbyEWrapAround,
        dolbyCAT561EncMeta80ProgramID,
        dolbyCAT561Enc30Configuration,
        dolbyCAT561Enc31Mode,
        dolbyCAT561Enc35DDPlusDataRate,
        dolbyCAT561Enc39DDDataRate,
        dolbyCAT561EncMeta60MetaDataSourceStatus,
        dolbyCAT561EncMeta66MetaDataReversionMode,
        dolbyCAT561Meta610MetaOutputReversionMode,
        dolbyCAT561EncMeta619DialNormOverwriteValue,
        dolbyCAT561EncMeta615DialNormOverwriteEnable,
        dolbyCAT561EncMeta627ComprProfileValue,
        dolbyCAT561EncMeta631DRProfileValue,
        dolbyCAT561EncMeta623DRCProfileOverwriteEnable,
        dolbyCAT561EncMeta639SurroundMode,
        dolbyCAT561EncMeta643DownMixmode,
        dolbyCAT561EncMeta635DownMixOverwriteEnable,
        dolbyCAT561EncMeta82AudioServiceType,
        dolbyCAT561EncMeta83AudioCodingMode,
        dolbyCAT561EncMeta84CenterMixLevel,
        dolbyCAT561EncMeta85SurroundMixLevel,
        dolbyCAT561EncMeta86SurroundMode,
        dolbyCAT561EncMeta87LFEencoded,
        dolbyCAT561EncMeta88DialNorm,
        dolbyCAT561EncMeta814Copyright,
        dolbyCAT561EncMeta810LanguageCode,
        dolbyCAT561EncMeta89LanguageCodeExists,
        dolbyCAT561EncMeta817XBSI1DownMixmode,
        dolbyCAT561EncMeta816XBSI1Exists,
        dolbyCAT561EncMeta818XBSI1LtRtCenterMix,
        dolbyCAT561EncMeta819XBSI1LtRtSurroundMix,
        dolbyCAT561EncMeta820XBSI1LoRoCenterMix,
        dolbyCAT561EncMeta821XBSI1LoRoSurroundMix,
        dolbyCAT561Board215FeatureSet,
        dolbyCAT561Dec216DolbyEProgConfig,
        dolbyCAT561DecMeta71DolbyEMetaDataStatus,
        dolbyCAT561EncMeta70SerialMetaDataStatus,
        dolbyCAT561EncMeta72MetaDataReversionStatus,
        dolbyCAT561Dec217DelayDE,
        dolbyCAT561Enc222DelayEnc1,
        delayVideoCompensateAudio,
        delayVideoUserMode,
        delayVideoFrames,
        delayVideoLines,
        delayVideoPixels,
        delayVideoTotalMs,
        delayAudioSDIIn11,
        delayAudioSDIIn12,
        delayAudioSDIIn21,
        delayAudioSDIIn22,
        delayAudioSDIIn31,
        delayAudioSDIIn32,
        delayAudioSDIIn41,
        delayAudioSDIIn42,
        delayAudioSDIOut11,
        delayAudioSDIOut12,
        delayAudioSDIOut21,
        delayAudioSDIOut22,
        delayAudioSDIOut31,
        delayAudioSDIOut32,
        delayAudioSDIOut41,
        delayAudioSDIOut42,
        delayAudioAESIn1,
        delayAudioAESIn2,
        delayAudioAESIn3,
        delayAudioAESIn4,
        delayAudioAESIn5,
        delayAudioAESIn6,
        delayAudioAESIn7,
        delayAudioAESIn8,
        delayAudioAESOut1,
        delayAudioAESOut2,
        delayAudioAESOut3,
        delayAudioAESOut4,
        delayAudioAESOut5,
        delayAudioAESOut6,
        delayAudioAESOut7,
        delayAudioAESOut8,
        inStandard,
        outStandard,
        inAes1,
        inAes2,
        inAes3,
        inAes4,
        inAes5,
        inAes6,
        inAes7,
        inAes8,
        inGrp1,
        inGrp2,
        inGrp3,
        inGrp4,
        embedGroup1,
        embedGroup2,
        embedGroup3,
        embedGroup4,
        sampleRateConversion1,
        sampleRateConversion2,
        sampleRateConversion3,
        sampleRateConversion4,
        sampleRateConversion5,
        sampleRateConversion6,
        sampleRateConversion7,
        sampleRateConversion8,
        sampleRateConversion9,
        sampleRateConversion10,
        sampleRateConversion11,
        sampleRateConversion12,
        sampleRateConversion13,
        sampleRateConversion14,
        sampleRateConversion15,
        sampleRateConversion16,
        sourceEmbAESStereo112,
        sourceEmbAES11,
        sourceEmbAES12,
        sourceEmbAESStereo134,
        sourceEmbAES13,
        sourceEmbAES14,
        sourceEmbAESStereo212,
        sourceEmbAES21,
        sourceEmbAES22,
        sourceEmbAESStereo234,
        sourceEmbAES23,
        sourceEmbAES24,
        sourceEmbAESStereo312,
        sourceEmbAES31,
        sourceEmbAES32,
        sourceEmbAESStereo334,
        sourceEmbAES33,
        sourceEmbAES34,
        sourceEmbAESStereo412,
        sourceEmbAES41,
        sourceEmbAES42,
        sourceEmbAESStereo434,
        sourceEmbAES43,
        sourceEmbAES44,
        testToneFrequency,
        deleteGroup1,
        deleteGroup2,
        deleteGroup3,
        deleteGroup4,
        embedBits1,
        embedBits2,
        embedBits3,
        embedBits4,
        cSBTransSDTV,
        embedded11,
        embedded12,
        embedded13,
        embedded14,
        embedded21,
        embedded22,
        embedded23,
        embedded24,
        embedded31,
        embedded32,
        embedded33,
        embedded34,
        embedded41,
        embedded42,
        embedded43,
        embedded44,
        sourceAESOut11,
        sourceAESOut12,
        sourceAESOut21,
        sourceAESOut22,
        sourceAESOut31,
        sourceAESOut32,
        sourceAESOut41,
        sourceAESOut42,
        sourceAESOut51,
        sourceAESOut52,
        sourceAESOut61,
        sourceAESOut62,
        sourceAESOut71,
        sourceAESOut72,
        sourceAESOut81,
        sourceAESOut82,
        vFlag,
        deembPhaseSync,
        deembPhaseSyncVerify,
        audioContentSDI1,
        audioContentSDI2,
        audioContentSDI3,
        audioContentSDI4,
        audioContentSDI5,
        audioContentSDI6,
        audioContentSDI7,
        audioContentSDI8,
        audioContentStatusSDI1,
        audioContentStatusSDI2,
        audioContentStatusSDI3,
        audioContentStatusSDI4,
        audioContentStatusSDI5,
        audioContentStatusSDI6,
        audioContentStatusSDI7,
        audioContentStatusSDI8,
        audioContentAES1,
        audioContentAES2,
        audioContentAES3,
        audioContentAES4,
        audioContentAES5,
        audioContentAES6,
        audioContentAES7,
        audioContentAES8,
        audioContentStatusAES1,
        audioContentStatusAES2,
        audioContentStatusAES3,
        audioContentStatusAES4,
        audioContentStatusAES5,
        audioContentStatusAES6,
        audioContentStatusAES7,
        audioContentStatusAES8,
        aESPortAssignment1,
        aESPortAssignment2,
        aESPortAssignment3,
        aESPortAssignment4,
        aESPortAssignment5,
        aESPortAssignment6,
        aESPortAssignment7,
        aESPortAssignment8,
        audioGain1L,
        audioMute1L,
        audioInvert1L,
        audioMixDown1L,
        audioSilence1L,
        audioOverload1L,
        audioTestTone1L,
        audioGain1R,
        audioMute1R,
        audioInvert1R,
        audioMixDown1R,
        audioSilence1R,
        audioOverload1R,
        audioTestTone1R,
        audioGain2L,
        audioMute2L,
        audioInvert2L,
        audioMixDown2L,
        audioSilence2L,
        audioOverload2L,
        audioTestTone2L,
        audioGain2R,
        audioMute2R,
        audioInvert2R,
        audioMixDown2R,
        audioSilence2R,
        audioOverload2R,
        audioTestTone2R,
        audioGain3L,
        audioMute3L,
        audioInvert3L,
        audioMixDown3L,
        audioSilence3L,
        audioOverload3L,
        audioTestTone3L,
        audioGain3R,
        audioMute3R,
        audioInvert3R,
        audioMixDown3R,
        audioSilence3R,
        audioOverload3R,
        audioTestTone3R,
        audioGain4L,
        audioMute4L,
        audioInvert4L,
        audioMixDown4L,
        audioSilence4L,
        audioOverload4L,
        audioTestTone4L,
        audioGain4R,
        audioMute4R,
        audioInvert4R,
        audioMixDown4R,
        audioSilence4R,
        audioOverload4R,
        audioTestTone4R,
        audioGain5L,
        audioMute5L,
        audioInvert5L,
        audioMixDown5L,
        audioSilence5L,
        audioOverload5L,
        audioTestTone5L,
        audioGain5R,
        audioMute5R,
        audioInvert5R,
        audioMixDown5R,
        audioSilence5R,
        audioOverload5R,
        audioTestTone5R,
        audioGain6L,
        audioMute6L,
        audioInvert6L,
        audioMixDown6L,
        audioSilence6L,
        audioOverload6L,
        audioTestTone6L,
        audioGain6R,
        audioMute6R,
        audioInvert6R,
        audioMixDown6R,
        audioSilence6R,
        audioOverload6R,
        audioTestTone6R,
        audioGain7L,
        audioMute7L,
        audioInvert7L,
        audioMixDown7L,
        audioSilence7L,
        audioOverload7L,
        audioTestTone7L,
        audioGain7R,
        audioMute7R,
        audioInvert7R,
        audioMixDown7R,
        audioSilence7R,
        audioOverload7R,
        audioTestTone7R,
        audioGain8L,
        audioMute8L,
        audioInvert8L,
        audioMixDown8L,
        audioSilence8L,
        audioOverload8L,
        audioTestTone8L,
        audioGain8R,
        audioMute8R,
        audioInvert8R,
        audioMixDown8R,
        audioSilence8R,
        audioOverload8R,
        audioTestTone8R,
        audioGain9L,
        audioMute9L,
        audioInvert9L,
        audioMixDown9L,
        audioSilence9L,
        audioOverload9L,
        audioTestTone9L,
        audioGain9R,
        audioMute9R,
        audioInvert9R,
        audioMixDown9R,
        audioSilence9R,
        audioOverload9R,
        audioTestTone9R,
        audioGain10L,
        audioMute10L,
        audioInvert10L,
        audioMixDown10L,
        audioSilence10L,
        audioOverload10L,
        audioTestTone10L,
        audioGain10R,
        audioMute10R,
        audioInvert10R,
        audioMixDown10R,
        audioSilence10R,
        audioOverload10R,
        audioTestTone10R,
        audioGain11L,
        audioMute11L,
        audioInvert11L,
        audioMixDown11L,
        audioSilence11L,
        audioOverload11L,
        audioTestTone11L,
        audioGain11R,
        audioMute11R,
        audioInvert11R,
        audioMixDown11R,
        audioSilence11R,
        audioOverload11R,
        audioTestTone11R,
        audioGain12L,
        audioMute12L,
        audioInvert12L,
        audioMixDown12L,
        audioSilence12L,
        audioOverload12L,
        audioTestTone12L,
        audioGain12R,
        audioMute12R,
        audioInvert12R,
        audioMixDown12R,
        audioSilence12R,
        audioOverload12R,
        audioTestTone12R,
        audioGain13L,
        audioMute13L,
        audioInvert13L,
        audioMixDown13L,
        audioSilence13L,
        audioOverload13L,
        audioTestTone13L,
        audioGain13R,
        audioMute13R,
        audioInvert13R,
        audioMixDown13R,
        audioSilence13R,
        audioOverload13R,
        audioTestTone13R,
        audioGain14L,
        audioMute14L,
        audioInvert14L,
        audioMixDown14L,
        audioSilence14L,
        audioOverload14L,
        audioTestTone14L,
        audioGain14R,
        audioMute14R,
        audioInvert14R,
        audioMixDown14R,
        audioSilence14R,
        audioOverload14R,
        audioTestTone14R,
        audioGain15L,
        audioMute15L,
        audioInvert15L,
        audioMixDown15L,
        audioSilence15L,
        audioOverload15L,
        audioTestTone15L,
        audioGain15R,
        audioMute15R,
        audioInvert15R,
        audioMixDown15R,
        audioSilence15R,
        audioOverload15R,
        audioTestTone15R,
        audioGain16L,
        audioMute16L,
        audioInvert16L,
        audioMixDown16L,
        audioSilence16L,
        audioOverload16L,
        audioTestTone16L,
        audioGain16R,
        audioMute16R,
        audioInvert16R,
        audioMixDown16R,
        audioSilence16R,
        audioOverload16R,
        audioTestTone16R,
        referenceLock,
        referenceStatus,
        referenceSource,
        freqPreselect,
        freq,
        inputToRefTolerance,
        syncMode1,
        inputFreezeSDI1,
        syncSDIIn1,
        sDIIn1FormatPsF,
        out1TotalProcTime,
        out1ApertureEnable,
        out1ApertureLevel,
        out1HBlank,
        out1VBlank,
        out1Gain,
        out1Saturation,
        out1BlackLevel,
        out1Hue,
        out1TestPatternSelect,
        out1TestPatternStd,
        out1TestPatternOn,
        out1IfNoInput,
        out1ModifyPsF,
        out1ClipHeadroom,
        out1FreezeMode,
        clipHeadroomLevel,
        presetsNumber,
        presetsActive,
        presetsSaveAs,
        presetsLoadToCurrent,
        presetsName0,
        presetsName1,
        presetsName2,
        presetsName3,
        presetsName4,
        presetsName5,
        presetsName6,
        presetsName7,
        delayAudioSDIOutGang,
        delayAudioAESOutGang,
        eventPrimaryPowermissingSNMP,
        eventRedundantPowermissingSNMP,
        eventFanFailureSNMP,
        eventReferenceNoInputSNMP,
        eventSDIInput1NoInputSNMP,
        eventCouldnotlocktoReferenceSNMP,
        eventCouldnotlocktoSDIInput1SNMP,
        eventAESInput1NoInputSNMP,
        eventAESInput2NoInputSNMP,
        eventAESInput3NoInputSNMP,
        eventAESInput4NoInputSNMP,
        eventAESInput5NoInputSNMP,
        eventAESInput6NoInputSNMP,
        eventAESInput7NoInputSNMP,
        eventAESInput8NoInputSNMP,
        eventEmbedderMissingInputSNMP,
        eventAESOutputNoInputSNMP,
        crossBarAudioOutEmbAES,
        crossBarAudioOutAES,
        dolbyCAT561EncMeta623DRCProfileOverwriteEnab,
        sNumber }
    STATUS current
    DESCRIPTION "Conformance group containing all device parameters"
    ::= { conformance 1 }

paramCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance specification"
    MODULE -- This module
    MANDATORY-GROUPS { paramGroup }
    ::= { conformance 2 }

END